From: Vipin KUMAR Date: Mon, 7 May 2012 07:30:19 +0000 (+0530) Subject: st_smi: Add support for SPEAr SMI driver X-Git-Tag: v2012.07-rc1~11^2~52 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=f3fcf92d595b297b47a1b58b8ec39f93f40ef912;p=u-boot st_smi: Add support for SPEAr SMI driver SMI is the serial memory interface controller provided by ST. Earlier, a driver exists in the u-boot source code for the SMI IP. However, it was specific to spear platforms. This commit converts the same driver to a more generic driver. As a result, the driver files are renamed to st_smi.c and st_smi.h and moved into drivers/mtd folder for reusability by other platforms using smi controller peripheral. Signed-off-by: Vipin Kumar Signed-off-by: Amit Virdi Signed-off-by: Stefan Roese --- diff --git a/arch/arm/include/asm/arch-spear/spr_smi.h b/arch/arm/include/asm/arch-spear/spr_smi.h deleted file mode 100644 index 06df74557f..0000000000 --- a/arch/arm/include/asm/arch-spear/spr_smi.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * (C) Copyright 2009 - * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef SPR_SMI_H -#define SPR_SMI_H - -/* 0xF800.0000 . 0xFBFF.FFFF 64MB SMI (Serial Flash Mem) */ -/* 0xFC00.0000 . 0xFC1F.FFFF 2MB SMI (Serial Flash Reg.) */ - -#define FLASH_START_ADDRESS CONFIG_SYS_FLASH_BASE -#define FLASH_BANK_SIZE CONFIG_SYS_FLASH_BANK_SIZE - -#define SMIBANK0_BASE (FLASH_START_ADDRESS) -#define SMIBANK1_BASE (SMIBANK0_BASE + FLASH_BANK_SIZE) -#define SMIBANK2_BASE (SMIBANK1_BASE + FLASH_BANK_SIZE) -#define SMIBANK3_BASE (SMIBANK2_BASE + FLASH_BANK_SIZE) - -#define BANK0 0 -#define BANK1 1 -#define BANK2 2 -#define BANK3 3 - -struct smi_regs { - u32 smi_cr1; - u32 smi_cr2; - u32 smi_sr; - u32 smi_tr; - u32 smi_rr; -}; - -/* CONTROL REG 1 */ -#define BANK_EN 0x0000000F /* enables all banks */ -#define DSEL_TIME 0x00000060 /* Deselect time */ -#define PRESCAL5 0x00000500 /* AHB_CK prescaling value */ -#define PRESCALA 0x00000A00 /* AHB_CK prescaling value */ -#define PRESCAL3 0x00000300 /* AHB_CK prescaling value */ -#define PRESCAL4 0x00000400 /* AHB_CK prescaling value */ -#define SW_MODE 0x10000000 /* enables SW Mode */ -#define WB_MODE 0x20000000 /* Write Burst Mode */ -#define FAST_MODE 0x00008000 /* Fast Mode */ -#define HOLD1 0x00010000 - -/* CONTROL REG 2 */ -#define RD_STATUS_REG 0x00000400 /* reads status reg */ -#define WE 0x00000800 /* Write Enable */ -#define BANK0_SEL 0x00000000 /* Select Banck0 */ -#define BANK1_SEL 0x00001000 /* Select Banck1 */ -#define BANK2_SEL 0x00002000 /* Select Banck2 */ -#define BANK3_SEL 0x00003000 /* Select Banck3 */ -#define BANKSEL_SHIFT 12 -#define SEND 0x00000080 /* Send data */ -#define TX_LEN_1 0x00000001 /* data length = 1 byte */ -#define TX_LEN_2 0x00000002 /* data length = 2 byte */ -#define TX_LEN_3 0x00000003 /* data length = 3 byte */ -#define TX_LEN_4 0x00000004 /* data length = 4 byte */ -#define RX_LEN_1 0x00000010 /* data length = 1 byte */ -#define RX_LEN_2 0x00000020 /* data length = 2 byte */ -#define RX_LEN_3 0x00000030 /* data length = 3 byte */ -#define RX_LEN_4 0x00000040 /* data length = 4 byte */ -#define TFIE 0x00000100 /* Tx Flag Interrupt Enable */ -#define WCIE 0x00000200 /* WCF Interrupt Enable */ - -/* STATUS_REG */ -#define INT_WCF_CLR 0xFFFFFDFF /* clear: WCF clear */ -#define INT_TFF_CLR 0xFFFFFEFF /* clear: TFF clear */ -#define WIP_BIT 0x00000001 /* WIP Bit of SPI SR */ -#define WEL_BIT 0x00000002 /* WEL Bit of SPI SR */ -#define RSR 0x00000005 /* Read Status regiser */ -#define TFF 0x00000100 /* Transfer Finished FLag */ -#define WCF 0x00000200 /* Transfer Finished FLag */ -#define ERF1 0x00000400 /* Error Flag 1 */ -#define ERF2 0x00000800 /* Error Flag 2 */ -#define WM0 0x00001000 /* WM Bank 0 */ -#define WM1 0x00002000 /* WM Bank 1 */ -#define WM2 0x00004000 /* WM Bank 2 */ -#define WM3 0x00008000 /* WM Bank 3 */ -#define WM_SHIFT 12 - -/* TR REG */ -#define READ_ID 0x0000009F /* Read Identification */ -#define BULK_ERASE 0x000000C7 /* BULK erase */ -#define SECTOR_ERASE 0x000000D8 /* SECTOR erase */ -#define WRITE_ENABLE 0x00000006 /* Wenable command to FLASH */ - -struct flash_dev { - u32 density; - ulong size; - ushort sector_count; -}; - -#define SFLASH_PAGE_SIZE 0x100 /* flash page size */ -#define XFER_FINISH_TOUT 2 /* xfer finish timeout */ -#define WMODE_TOUT 2 /* write enable timeout */ - -#endif diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 5a5ecdfe3c..543c845ff0 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -35,7 +35,7 @@ COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o COBJS-$(CONFIG_FTSMC020) += ftsmc020.o COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o COBJS-$(CONFIG_MW_EEPROM) += mw_eeprom.o -COBJS-$(CONFIG_SPEARSMI) += spr_smi.o +COBJS-$(CONFIG_ST_SMI) += st_smi.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/mtd/spr_smi.c b/drivers/mtd/spr_smi.c deleted file mode 100644 index 6d4257a3f5..0000000000 --- a/drivers/mtd/spr_smi.c +++ /dev/null @@ -1,518 +0,0 @@ -/* - * (C) Copyright 2009 - * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -#include -#include -#include - -#if !defined(CONFIG_SYS_NO_FLASH) - -static struct smi_regs *const smicntl = - (struct smi_regs * const)CONFIG_SYS_SMI_BASE; -static ulong bank_base[CONFIG_SYS_MAX_FLASH_BANKS] = - CONFIG_SYS_FLASH_ADDR_BASE; -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -#define ST_M25Pxx_ID 0x00002020 - -static struct flash_dev flash_ids[] = { - {0x10, 0x10000, 2}, /* 64K Byte */ - {0x11, 0x20000, 4}, /* 128K Byte */ - {0x12, 0x40000, 4}, /* 256K Byte */ - {0x13, 0x80000, 8}, /* 512K Byte */ - {0x14, 0x100000, 16}, /* 1M Byte */ - {0x15, 0x200000, 32}, /* 2M Byte */ - {0x16, 0x400000, 64}, /* 4M Byte */ - {0x17, 0x800000, 128}, /* 8M Byte */ - {0x18, 0x1000000, 64}, /* 16M Byte */ - {0x00,} -}; - -/* - * smi_wait_xfer_finish - Wait until TFF is set in status register - * @timeout: timeout in milliseconds - * - * Wait until TFF is set in status register - */ -static void smi_wait_xfer_finish(int timeout) -{ - while (timeout--) { - if (readl(&smicntl->smi_sr) & TFF) - break; - udelay(1000); - } -} - -/* - * smi_read_id - Read flash id - * @info: flash_info structure pointer - * @banknum: bank number - * - * Read the flash id present at bank #banknum - */ -static unsigned int smi_read_id(flash_info_t *info, int banknum) -{ - unsigned int value; - - writel(readl(&smicntl->smi_cr1) | SW_MODE, &smicntl->smi_cr1); - writel(READ_ID, &smicntl->smi_tr); - writel((banknum << BANKSEL_SHIFT) | SEND | TX_LEN_1 | RX_LEN_3, - &smicntl->smi_cr2); - smi_wait_xfer_finish(XFER_FINISH_TOUT); - - value = (readl(&smicntl->smi_rr) & 0x00FFFFFF); - - writel(readl(&smicntl->smi_sr) & ~TFF, &smicntl->smi_sr); - writel(readl(&smicntl->smi_cr1) & ~SW_MODE, &smicntl->smi_cr1); - - return value; -} - -/* - * flash_get_size - Detect the SMI flash by reading the ID. - * @base: Base address of the flash area bank #banknum - * @banknum: Bank number - * - * Detect the SMI flash by reading the ID. Initializes the flash_info structure - * with size, sector count etc. - */ -static ulong flash_get_size(ulong base, int banknum) -{ - flash_info_t *info = &flash_info[banknum]; - struct flash_dev *dev; - unsigned int value; - unsigned int density; - int i; - - value = smi_read_id(info, banknum); - density = (value >> 16) & 0xff; - - for (i = 0, dev = &flash_ids[0]; dev->density != 0x0; - i++, dev = &flash_ids[i]) { - if (dev->density == density) { - info->size = dev->size; - info->sector_count = dev->sector_count; - break; - } - } - - if (dev->density == 0x0) - return 0; - - info->flash_id = value & 0xffff; - info->start[0] = base; - - return info->size; -} - -/* - * smi_read_sr - Read status register of SMI - * @bank: bank number - * - * This routine will get the status register of the flash chip present at the - * given bank - */ -static unsigned int smi_read_sr(int bank) -{ - u32 ctrlreg1; - - /* store the CTRL REG1 state */ - ctrlreg1 = readl(&smicntl->smi_cr1); - - /* Program SMI in HW Mode */ - writel(readl(&smicntl->smi_cr1) & ~(SW_MODE | WB_MODE), - &smicntl->smi_cr1); - - /* Performing a RSR instruction in HW mode */ - writel((bank << BANKSEL_SHIFT) | RD_STATUS_REG, &smicntl->smi_cr2); - - smi_wait_xfer_finish(XFER_FINISH_TOUT); - - /* Restore the CTRL REG1 state */ - writel(ctrlreg1, &smicntl->smi_cr1); - - return readl(&smicntl->smi_sr); -} - -/* - * smi_wait_till_ready - Wait till last operation is over. - * @bank: bank number shifted. - * @timeout: timeout in milliseconds. - * - * This routine checks for WIP(write in progress)bit in Status register(SMSR-b0) - * The routine checks for #timeout loops, each at interval of 1 milli-second. - * If successful the routine returns 0. - */ -static int smi_wait_till_ready(int bank, int timeout) -{ - int count; - unsigned int sr; - - /* One chip guarantees max 5 msec wait here after page writes, - but potentially three seconds (!) after page erase. */ - for (count = 0; count < timeout; count++) { - - sr = smi_read_sr(bank); - if (sr < 0) - break; - else if (!(sr & WIP_BIT)) - return 0; - - /* Try again after 1m-sec */ - udelay(1000); - } - printf("SMI controller is still in wait, timeout=%d\n", timeout); - return -EIO; -} - -/* - * smi_write_enable - Enable the flash to do write operation - * @bank: bank number - * - * Set write enable latch with Write Enable command. - * Returns negative if error occurred. - */ -static int smi_write_enable(int bank) -{ - u32 ctrlreg1; - int timeout = WMODE_TOUT; - - /* Store the CTRL REG1 state */ - ctrlreg1 = readl(&smicntl->smi_cr1); - - /* Program SMI in H/W Mode */ - writel(readl(&smicntl->smi_cr1) & ~SW_MODE, &smicntl->smi_cr1); - - /* Give the Flash, Write Enable command */ - writel((bank << BANKSEL_SHIFT) | WE, &smicntl->smi_cr2); - - smi_wait_xfer_finish(XFER_FINISH_TOUT); - - /* Restore the CTRL REG1 state */ - writel(ctrlreg1, &smicntl->smi_cr1); - - while (timeout--) { - if (smi_read_sr(bank) & (1 << (bank + WM_SHIFT))) - break; - udelay(1000); - } - - if (timeout) - return 0; - - return -1; -} - -/* - * smi_init - SMI initialization routine - * - * SMI initialization routine. Sets SMI control register1. - */ -static void smi_init(void) -{ - /* Setting the fast mode values. SMI working at 166/4 = 41.5 MHz */ - writel(HOLD1 | FAST_MODE | BANK_EN | DSEL_TIME | PRESCAL4, - &smicntl->smi_cr1); -} - -/* - * smi_sector_erase - Erase flash sector - * @info: flash_info structure pointer - * @sector: sector number - * - * Set write enable latch with Write Enable command. - * Returns negative if error occurred. - */ -static int smi_sector_erase(flash_info_t *info, unsigned int sector) -{ - int bank; - unsigned int sect_add; - unsigned int instruction; - - switch (info->start[0]) { - case SMIBANK0_BASE: - bank = BANK0; - break; - case SMIBANK1_BASE: - bank = BANK1; - break; - case SMIBANK2_BASE: - bank = BANK2; - break; - case SMIBANK3_BASE: - bank = BANK3; - break; - default: - return -1; - } - - sect_add = sector * (info->size / info->sector_count); - instruction = ((sect_add >> 8) & 0x0000FF00) | SECTOR_ERASE; - - writel(readl(&smicntl->smi_sr) & ~(ERF1 | ERF2), &smicntl->smi_sr); - - if (info->flash_id == ST_M25Pxx_ID) { - /* Wait until finished previous write command. */ - if (smi_wait_till_ready(bank, CONFIG_SYS_FLASH_ERASE_TOUT)) - return -EBUSY; - - /* Send write enable, before erase commands. */ - if (smi_write_enable(bank)) - return -EIO; - - /* Put SMI in SW mode */ - writel(readl(&smicntl->smi_cr1) | SW_MODE, &smicntl->smi_cr1); - - /* Send Sector Erase command in SW Mode */ - writel(instruction, &smicntl->smi_tr); - writel((bank << BANKSEL_SHIFT) | SEND | TX_LEN_4, - &smicntl->smi_cr2); - smi_wait_xfer_finish(XFER_FINISH_TOUT); - - if (smi_wait_till_ready(bank, CONFIG_SYS_FLASH_ERASE_TOUT)) - return -EBUSY; - - /* Put SMI in HW mode */ - writel(readl(&smicntl->smi_cr1) & ~SW_MODE, - &smicntl->smi_cr1); - - return 0; - } else { - /* Put SMI in HW mode */ - writel(readl(&smicntl->smi_cr1) & ~SW_MODE, - &smicntl->smi_cr1); - return -EINVAL; - } -} - -/* - * smi_write - Write to SMI flash - * @src_addr: source buffer - * @dst_addr: destination buffer - * @length: length to write in words - * @bank: bank base address - * - * Write to SMI flash - */ -static int smi_write(unsigned int *src_addr, unsigned int *dst_addr, - unsigned int length, ulong bank_addr) -{ - int banknum; - - switch (bank_addr) { - case SMIBANK0_BASE: - banknum = BANK0; - break; - case SMIBANK1_BASE: - banknum = BANK1; - break; - case SMIBANK2_BASE: - banknum = BANK2; - break; - case SMIBANK3_BASE: - banknum = BANK3; - break; - default: - return -1; - } - - if (smi_wait_till_ready(banknum, CONFIG_SYS_FLASH_WRITE_TOUT)) - return -EBUSY; - - /* Set SMI in Hardware Mode */ - writel(readl(&smicntl->smi_cr1) & ~SW_MODE, &smicntl->smi_cr1); - - if (smi_write_enable(banknum)) - return -EIO; - - /* Perform the write command */ - while (length--) { - if (((ulong) (dst_addr) % SFLASH_PAGE_SIZE) == 0) { - if (smi_wait_till_ready(banknum, - CONFIG_SYS_FLASH_WRITE_TOUT)) - return -EBUSY; - - if (smi_write_enable(banknum)) - return -EIO; - } - - *dst_addr++ = *src_addr++; - - if ((readl(&smicntl->smi_sr) & (ERF1 | ERF2))) - return -EIO; - } - - if (smi_wait_till_ready(banknum, CONFIG_SYS_FLASH_WRITE_TOUT)) - return -EBUSY; - - writel(readl(&smicntl->smi_sr) & ~(WCF), &smicntl->smi_sr); - - return 0; -} - -/* - * write_buff - Write to SMI flash - * @info: flash info structure - * @src: source buffer - * @dest_addr: destination buffer - * @length: length to write in words - * - * Write to SMI flash - */ -int write_buff(flash_info_t *info, uchar *src, ulong dest_addr, ulong length) -{ - return smi_write((unsigned int *)src, (unsigned int *)dest_addr, - (length + 3) / 4, info->start[0]); -} - -/* - * flash_init - SMI flash initialization - * - * SMI flash initialization - */ -unsigned long flash_init(void) -{ - unsigned long size = 0; - int i, j; - - smi_init(); - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - flash_info[i].flash_id = FLASH_UNKNOWN; - size += flash_info[i].size = flash_get_size(bank_base[i], i); - } - - for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; j++) { - for (i = 1; i < flash_info[j].sector_count; i++) - flash_info[j].start[i] = - flash_info[j].start[i - 1] + - flash_info->size / flash_info->sector_count; - - } - - return size; -} - -/* - * flash_print_info - Print SMI flash information - * - * Print SMI flash information - */ -void flash_print_info(flash_info_t *info) -{ - int i; - if (info->flash_id == FLASH_UNKNOWN) { - puts("missing or unknown FLASH type\n"); - return; - } - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - puts(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { -#ifdef CONFIG_SYS_FLASH_EMPTY_INFO - int size; - int erased; - u32 *flash; - - /* - * Check if whole sector is erased - */ - size = (info->size) / (info->sector_count); - flash = (u32 *) info->start[i]; - size = size / sizeof(int); - - while ((size--) && (*flash++ == ~0)) - ; - - size++; - if (size) - erased = 0; - else - erased = 1; - - if ((i % 5) == 0) - printf("\n"); - - printf(" %08lX%s%s", - info->start[i], - erased ? " E" : " ", info->protect[i] ? "RO " : " "); -#else - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s", - info->start[i], info->protect[i] ? " (RO) " : " "); -#endif - } - putc('\n'); - return; -} - -/* - * flash_erase - Erase SMI flash - * - * Erase SMI flash - */ -int flash_erase(flash_info_t *info, int s_first, int s_last) -{ - int rcode = 0; - int prot = 0; - flash_sect_t sect; - - if (info->flash_id != ST_M25Pxx_ID) { - puts("Can't erase unknown flash type - aborted\n"); - return 1; - } - - if ((s_first < 0) || (s_first > s_last)) { - puts("- no sectors to erase\n"); - return 1; - } - - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) - prot++; - } - if (prot) { - printf("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - putc('\n'); - } - - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { - if (smi_sector_erase(info, sect)) - rcode = 1; - else - putc('.'); - } - } - puts(" done\n"); - return rcode; -} -#endif diff --git a/drivers/mtd/st_smi.c b/drivers/mtd/st_smi.c new file mode 100644 index 0000000000..db08ab97e4 --- /dev/null +++ b/drivers/mtd/st_smi.c @@ -0,0 +1,519 @@ +/* + * (C) Copyright 2009 + * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include +#include + +#if !defined(CONFIG_SYS_NO_FLASH) + +static struct smi_regs *const smicntl = + (struct smi_regs * const)CONFIG_SYS_SMI_BASE; +static ulong bank_base[CONFIG_SYS_MAX_FLASH_BANKS] = + CONFIG_SYS_FLASH_ADDR_BASE; +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; + +#define ST_M25Pxx_ID 0x00002020 + +static struct flash_dev flash_ids[] = { + {0x10, 0x10000, 2}, /* 64K Byte */ + {0x11, 0x20000, 4}, /* 128K Byte */ + {0x12, 0x40000, 4}, /* 256K Byte */ + {0x13, 0x80000, 8}, /* 512K Byte */ + {0x14, 0x100000, 16}, /* 1M Byte */ + {0x15, 0x200000, 32}, /* 2M Byte */ + {0x16, 0x400000, 64}, /* 4M Byte */ + {0x17, 0x800000, 128}, /* 8M Byte */ + {0x18, 0x1000000, 64}, /* 16M Byte */ + {0x00,} +}; + +/* + * smi_wait_xfer_finish - Wait until TFF is set in status register + * @timeout: timeout in milliseconds + * + * Wait until TFF is set in status register + */ +static void smi_wait_xfer_finish(int timeout) +{ + while (timeout--) { + if (readl(&smicntl->smi_sr) & TFF) + break; + udelay(1000); + } +} + +/* + * smi_read_id - Read flash id + * @info: flash_info structure pointer + * @banknum: bank number + * + * Read the flash id present at bank #banknum + */ +static unsigned int smi_read_id(flash_info_t *info, int banknum) +{ + unsigned int value; + + writel(readl(&smicntl->smi_cr1) | SW_MODE, &smicntl->smi_cr1); + writel(READ_ID, &smicntl->smi_tr); + writel((banknum << BANKSEL_SHIFT) | SEND | TX_LEN_1 | RX_LEN_3, + &smicntl->smi_cr2); + + smi_wait_xfer_finish(XFER_FINISH_TOUT); + + value = (readl(&smicntl->smi_rr) & 0x00FFFFFF); + + writel(readl(&smicntl->smi_sr) & ~TFF, &smicntl->smi_sr); + writel(readl(&smicntl->smi_cr1) & ~SW_MODE, &smicntl->smi_cr1); + + return value; +} + +/* + * flash_get_size - Detect the SMI flash by reading the ID. + * @base: Base address of the flash area bank #banknum + * @banknum: Bank number + * + * Detect the SMI flash by reading the ID. Initializes the flash_info structure + * with size, sector count etc. + */ +static ulong flash_get_size(ulong base, int banknum) +{ + flash_info_t *info = &flash_info[banknum]; + struct flash_dev *dev; + unsigned int value; + unsigned int density; + int i; + + value = smi_read_id(info, banknum); + density = (value >> 16) & 0xff; + + for (i = 0, dev = &flash_ids[0]; dev->density != 0x0; + i++, dev = &flash_ids[i]) { + if (dev->density == density) { + info->size = dev->size; + info->sector_count = dev->sector_count; + break; + } + } + + if (dev->density == 0x0) + return 0; + + info->flash_id = value & 0xffff; + info->start[0] = base; + + return info->size; +} + +/* + * smi_read_sr - Read status register of SMI + * @bank: bank number + * + * This routine will get the status register of the flash chip present at the + * given bank + */ +static unsigned int smi_read_sr(int bank) +{ + u32 ctrlreg1; + + /* store the CTRL REG1 state */ + ctrlreg1 = readl(&smicntl->smi_cr1); + + /* Program SMI in HW Mode */ + writel(readl(&smicntl->smi_cr1) & ~(SW_MODE | WB_MODE), + &smicntl->smi_cr1); + + /* Performing a RSR instruction in HW mode */ + writel((bank << BANKSEL_SHIFT) | RD_STATUS_REG, &smicntl->smi_cr2); + + smi_wait_xfer_finish(XFER_FINISH_TOUT); + + /* Restore the CTRL REG1 state */ + writel(ctrlreg1, &smicntl->smi_cr1); + + return readl(&smicntl->smi_sr); +} + +/* + * smi_wait_till_ready - Wait till last operation is over. + * @bank: bank number shifted. + * @timeout: timeout in milliseconds. + * + * This routine checks for WIP(write in progress)bit in Status register(SMSR-b0) + * The routine checks for #timeout loops, each at interval of 1 milli-second. + * If successful the routine returns 0. + */ +static int smi_wait_till_ready(int bank, int timeout) +{ + int count; + unsigned int sr; + + /* One chip guarantees max 5 msec wait here after page writes, + but potentially three seconds (!) after page erase. */ + for (count = 0; count < timeout; count++) { + + sr = smi_read_sr(bank); + if (sr < 0) + break; + else if (!(sr & WIP_BIT)) + return 0; + + /* Try again after 1m-sec */ + udelay(1000); + } + printf("SMI controller is still in wait, timeout=%d\n", timeout); + return -EIO; +} + +/* + * smi_write_enable - Enable the flash to do write operation + * @bank: bank number + * + * Set write enable latch with Write Enable command. + * Returns negative if error occurred. + */ +static int smi_write_enable(int bank) +{ + u32 ctrlreg1; + int timeout = WMODE_TOUT; + + /* Store the CTRL REG1 state */ + ctrlreg1 = readl(&smicntl->smi_cr1); + + /* Program SMI in H/W Mode */ + writel(readl(&smicntl->smi_cr1) & ~SW_MODE, &smicntl->smi_cr1); + + /* Give the Flash, Write Enable command */ + writel((bank << BANKSEL_SHIFT) | WE, &smicntl->smi_cr2); + + smi_wait_xfer_finish(XFER_FINISH_TOUT); + + /* Restore the CTRL REG1 state */ + writel(ctrlreg1, &smicntl->smi_cr1); + + while (timeout--) { + if (smi_read_sr(bank) & (1 << (bank + WM_SHIFT))) + break; + udelay(1000); + } + + if (timeout) + return 0; + + return -1; +} + +/* + * smi_init - SMI initialization routine + * + * SMI initialization routine. Sets SMI control register1. + */ +void smi_init(void) +{ + /* Setting the fast mode values. SMI working at 166/4 = 41.5 MHz */ + writel(HOLD1 | FAST_MODE | BANK_EN | DSEL_TIME | PRESCAL4, + &smicntl->smi_cr1); +} + +/* + * smi_sector_erase - Erase flash sector + * @info: flash_info structure pointer + * @sector: sector number + * + * Set write enable latch with Write Enable command. + * Returns negative if error occurred. + */ +static int smi_sector_erase(flash_info_t *info, unsigned int sector) +{ + int bank; + unsigned int sect_add; + unsigned int instruction; + + switch (info->start[0]) { + case SMIBANK0_BASE: + bank = BANK0; + break; + case SMIBANK1_BASE: + bank = BANK1; + break; + case SMIBANK2_BASE: + bank = BANK2; + break; + case SMIBANK3_BASE: + bank = BANK3; + break; + default: + return -1; + } + + sect_add = sector * (info->size / info->sector_count); + instruction = ((sect_add >> 8) & 0x0000FF00) | SECTOR_ERASE; + + writel(readl(&smicntl->smi_sr) & ~(ERF1 | ERF2), &smicntl->smi_sr); + + if (info->flash_id == ST_M25Pxx_ID) { + /* Wait until finished previous write command. */ + if (smi_wait_till_ready(bank, CONFIG_SYS_FLASH_ERASE_TOUT)) + return -EBUSY; + + /* Send write enable, before erase commands. */ + if (smi_write_enable(bank)) + return -EIO; + + /* Put SMI in SW mode */ + writel(readl(&smicntl->smi_cr1) | SW_MODE, &smicntl->smi_cr1); + + /* Send Sector Erase command in SW Mode */ + writel(instruction, &smicntl->smi_tr); + writel((bank << BANKSEL_SHIFT) | SEND | TX_LEN_4, + &smicntl->smi_cr2); + smi_wait_xfer_finish(XFER_FINISH_TOUT); + + if (smi_wait_till_ready(bank, CONFIG_SYS_FLASH_ERASE_TOUT)) + return -EBUSY; + + /* Put SMI in HW mode */ + writel(readl(&smicntl->smi_cr1) & ~SW_MODE, + &smicntl->smi_cr1); + + return 0; + } else { + /* Put SMI in HW mode */ + writel(readl(&smicntl->smi_cr1) & ~SW_MODE, + &smicntl->smi_cr1); + return -EINVAL; + } +} + +/* + * smi_write - Write to SMI flash + * @src_addr: source buffer + * @dst_addr: destination buffer + * @length: length to write in words + * @bank: bank base address + * + * Write to SMI flash + */ +static int smi_write(unsigned int *src_addr, unsigned int *dst_addr, + unsigned int length, ulong bank_addr) +{ + int banknum; + + switch (bank_addr) { + case SMIBANK0_BASE: + banknum = BANK0; + break; + case SMIBANK1_BASE: + banknum = BANK1; + break; + case SMIBANK2_BASE: + banknum = BANK2; + break; + case SMIBANK3_BASE: + banknum = BANK3; + break; + default: + return -1; + } + + if (smi_wait_till_ready(banknum, CONFIG_SYS_FLASH_WRITE_TOUT)) + return -EBUSY; + + /* Set SMI in Hardware Mode */ + writel(readl(&smicntl->smi_cr1) & ~SW_MODE, &smicntl->smi_cr1); + + if (smi_write_enable(banknum)) + return -EIO; + + /* Perform the write command */ + while (length--) { + if (((ulong) (dst_addr) % SFLASH_PAGE_SIZE) == 0) { + if (smi_wait_till_ready(banknum, + CONFIG_SYS_FLASH_WRITE_TOUT)) + return -EBUSY; + + if (smi_write_enable(banknum)) + return -EIO; + } + + *dst_addr++ = *src_addr++; + + if ((readl(&smicntl->smi_sr) & (ERF1 | ERF2))) + return -EIO; + } + + if (smi_wait_till_ready(banknum, CONFIG_SYS_FLASH_WRITE_TOUT)) + return -EBUSY; + + writel(readl(&smicntl->smi_sr) & ~(WCF), &smicntl->smi_sr); + + return 0; +} + +/* + * write_buff - Write to SMI flash + * @info: flash info structure + * @src: source buffer + * @dest_addr: destination buffer + * @length: length to write in words + * + * Write to SMI flash + */ +int write_buff(flash_info_t *info, uchar *src, ulong dest_addr, ulong length) +{ + return smi_write((unsigned int *)src, (unsigned int *)dest_addr, + (length + 3) / 4, info->start[0]); +} + +/* + * flash_init - SMI flash initialization + * + * SMI flash initialization + */ +unsigned long flash_init(void) +{ + unsigned long size = 0; + int i, j; + + smi_init(); + + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { + flash_info[i].flash_id = FLASH_UNKNOWN; + size += flash_info[i].size = flash_get_size(bank_base[i], i); + } + + for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; j++) { + for (i = 1; i < flash_info[j].sector_count; i++) + flash_info[j].start[i] = + flash_info[j].start[i - 1] + + flash_info->size / flash_info->sector_count; + + } + + return size; +} + +/* + * flash_print_info - Print SMI flash information + * + * Print SMI flash information + */ +void flash_print_info(flash_info_t *info) +{ + int i; + if (info->flash_id == FLASH_UNKNOWN) { + puts("missing or unknown FLASH type\n"); + return; + } + printf(" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + puts(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { +#ifdef CONFIG_SYS_FLASH_EMPTY_INFO + int size; + int erased; + u32 *flash; + + /* + * Check if whole sector is erased + */ + size = (info->size) / (info->sector_count); + flash = (u32 *) info->start[i]; + size = size / sizeof(int); + + while ((size--) && (*flash++ == ~0)) + ; + + size++; + if (size) + erased = 0; + else + erased = 1; + + if ((i % 5) == 0) + printf("\n"); + + printf(" %08lX%s%s", + info->start[i], + erased ? " E" : " ", info->protect[i] ? "RO " : " "); +#else + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s", + info->start[i], info->protect[i] ? " (RO) " : " "); +#endif + } + putc('\n'); + return; +} + +/* + * flash_erase - Erase SMI flash + * + * Erase SMI flash + */ +int flash_erase(flash_info_t *info, int s_first, int s_last) +{ + int rcode = 0; + int prot = 0; + flash_sect_t sect; + + if (info->flash_id != ST_M25Pxx_ID) { + puts("Can't erase unknown flash type - aborted\n"); + return 1; + } + + if ((s_first < 0) || (s_first > s_last)) { + puts("- no sectors to erase\n"); + return 1; + } + + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) + prot++; + } + if (prot) { + printf("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + putc('\n'); + } + + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { + if (smi_sector_erase(info, sect)) + rcode = 1; + else + putc('.'); + } + } + puts(" done\n"); + return rcode; +} +#endif diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index 8d0f0369ca..75cc5fff64 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -55,10 +55,10 @@ #if defined(CONFIG_FLASH_PNOR) #define CONFIG_SPEAR_EMI 1 #else -#define CONFIG_SPEARSMI 1 +#define CONFIG_ST_SMI #endif -#if defined(CONFIG_SPEARSMI) +#if defined(CONFIG_ST_SMI) #define CONFIG_SYS_MAX_FLASH_BANKS 2 #define CONFIG_SYS_FLASH_BASE (0xF8000000) @@ -125,7 +125,7 @@ * U-Boot Environment placing definitions. */ #if defined(CONFIG_ENV_IS_IN_FLASH) -#ifdef CONFIG_SPEARSMI +#ifdef CONFIG_ST_SMI /* * Environment is in serial NOR flash */ diff --git a/include/linux/mtd/st_smi.h b/include/linux/mtd/st_smi.h new file mode 100644 index 0000000000..b7a78acd7c --- /dev/null +++ b/include/linux/mtd/st_smi.h @@ -0,0 +1,117 @@ +/* + * (C) Copyright 2009 + * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef ST_SMI_H +#define ST_SMI_H + +/* 0xF800.0000 . 0xFBFF.FFFF 64MB SMI (Serial Flash Mem) */ +/* 0xFC00.0000 . 0xFC1F.FFFF 2MB SMI (Serial Flash Reg.) */ + +#define FLASH_START_ADDRESS CONFIG_SYS_FLASH_BASE +#define FLASH_BANK_SIZE CONFIG_SYS_FLASH_BANK_SIZE + +#define SMIBANK0_BASE (FLASH_START_ADDRESS) +#define SMIBANK1_BASE (SMIBANK0_BASE + FLASH_BANK_SIZE) +#define SMIBANK2_BASE (SMIBANK1_BASE + FLASH_BANK_SIZE) +#define SMIBANK3_BASE (SMIBANK2_BASE + FLASH_BANK_SIZE) + +#define BANK0 0 +#define BANK1 1 +#define BANK2 2 +#define BANK3 3 + +struct smi_regs { + u32 smi_cr1; + u32 smi_cr2; + u32 smi_sr; + u32 smi_tr; + u32 smi_rr; +}; + +/* CONTROL REG 1 */ +#define BANK_EN 0x0000000F /* enables all banks */ +#define DSEL_TIME 0x00000060 /* Deselect time */ +#define PRESCAL5 0x00000500 /* AHB_CK prescaling value */ +#define PRESCALA 0x00000A00 /* AHB_CK prescaling value */ +#define PRESCAL3 0x00000300 /* AHB_CK prescaling value */ +#define PRESCAL4 0x00000400 /* AHB_CK prescaling value */ +#define SW_MODE 0x10000000 /* enables SW Mode */ +#define WB_MODE 0x20000000 /* Write Burst Mode */ +#define FAST_MODE 0x00008000 /* Fast Mode */ +#define HOLD1 0x00010000 + +/* CONTROL REG 2 */ +#define RD_STATUS_REG 0x00000400 /* reads status reg */ +#define WE 0x00000800 /* Write Enable */ +#define BANK0_SEL 0x00000000 /* Select Banck0 */ +#define BANK1_SEL 0x00001000 /* Select Banck1 */ +#define BANK2_SEL 0x00002000 /* Select Banck2 */ +#define BANK3_SEL 0x00003000 /* Select Banck3 */ +#define BANKSEL_SHIFT 12 +#define SEND 0x00000080 /* Send data */ +#define TX_LEN_1 0x00000001 /* data length = 1 byte */ +#define TX_LEN_2 0x00000002 /* data length = 2 byte */ +#define TX_LEN_3 0x00000003 /* data length = 3 byte */ +#define TX_LEN_4 0x00000004 /* data length = 4 byte */ +#define RX_LEN_1 0x00000010 /* data length = 1 byte */ +#define RX_LEN_2 0x00000020 /* data length = 2 byte */ +#define RX_LEN_3 0x00000030 /* data length = 3 byte */ +#define RX_LEN_4 0x00000040 /* data length = 4 byte */ +#define TFIE 0x00000100 /* Tx Flag Interrupt Enable */ +#define WCIE 0x00000200 /* WCF Interrupt Enable */ + +/* STATUS_REG */ +#define INT_WCF_CLR 0xFFFFFDFF /* clear: WCF clear */ +#define INT_TFF_CLR 0xFFFFFEFF /* clear: TFF clear */ +#define WIP_BIT 0x00000001 /* WIP Bit of SPI SR */ +#define WEL_BIT 0x00000002 /* WEL Bit of SPI SR */ +#define RSR 0x00000005 /* Read Status regiser */ +#define TFF 0x00000100 /* Transfer Finished FLag */ +#define WCF 0x00000200 /* Transfer Finished FLag */ +#define ERF1 0x00000400 /* Error Flag 1 */ +#define ERF2 0x00000800 /* Error Flag 2 */ +#define WM0 0x00001000 /* WM Bank 0 */ +#define WM1 0x00002000 /* WM Bank 1 */ +#define WM2 0x00004000 /* WM Bank 2 */ +#define WM3 0x00008000 /* WM Bank 3 */ +#define WM_SHIFT 12 + +/* TR REG */ +#define READ_ID 0x0000009F /* Read Identification */ +#define BULK_ERASE 0x000000C7 /* BULK erase */ +#define SECTOR_ERASE 0x000000D8 /* SECTOR erase */ +#define WRITE_ENABLE 0x00000006 /* Wenable command to FLASH */ + +struct flash_dev { + u32 density; + ulong size; + ushort sector_count; +}; + +#define SFLASH_PAGE_SIZE 0x100 /* flash page size */ +#define XFER_FINISH_TOUT 2 /* xfer finish timeout */ +#define WMODE_TOUT 2 /* write enable timeout */ + +extern void smi_init(void); + +#endif