From: York Sun Date: Thu, 7 Dec 2017 22:37:40 +0000 (-0800) Subject: armv8: ls2085a: Update README file for NAND boot X-Git-Tag: v2018.01-rc2~3^2~1 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=f440aba172c3b1107176d59f9cd0d7b209afc0a8;p=u-boot armv8: ls2085a: Update README file for NAND boot Update README file to note LS2088A and LS1088A don't support booting from NAND flash. Signed-off-by: York Sun --- diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 index 025a1b7b2e..6c98d99d0c 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 @@ -154,8 +154,8 @@ Booting from NAND ------------------- Booting from NAND requires two images, RCW and u-boot-with-spl.bin. The difference between NAND boot RCW image and NOR boot image is the PBI -command sequence. Below is one example for PBI commands for QDS which uses -NAND device with 2KB/page, block size 128KB. +command sequence. Below is one example for PBI commands for LS2085AQDS which +uses NAND device with 2KB/page, block size 128KB. 1) CCSR 4-byte write to 0x00e00404, data=0x00000000 2) CCSR 4-byte write to 0x00e00400, data=0x1800a000 @@ -188,7 +188,7 @@ nand write 200000 With these two images in NAND device, the board can boot from NAND. -Another example for RDB boards, +Another example for LS2085ARDB boards, 1) CCSR 4-byte write to 0x00e00404, data=0x00000000 2) CCSR 4-byte write to 0x00e00400, data=0x1800a000 @@ -201,6 +201,8 @@ nand write 80000 Notice the difference from QDS is SRC, SRC_ADDR and the offset of u-boot image to match board NAND device with 4KB/page, block size 512KB. +Note, LS2088A and LS1088A don't support booting from NAND. + Booting from SD/eMMC ------------------- Booting from SD/eMMC requires two images, RCW and u-boot-with-spl.bin.