From: Wolfgang Denk Date: Mon, 16 Apr 2012 21:13:51 +0000 (+0200) Subject: Prepare v2012.04-rc2; minor Coding Style cleanup X-Git-Tag: v2012.04-rc2^0 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=f5cdc11775c4b7fdbf52a6dd2f463d329804ab11;p=u-boot Prepare v2012.04-rc2; minor Coding Style cleanup Signed-off-by: Wolfgang Denk --- diff --git a/Makefile b/Makefile index 4ddf8d6a53..c79cc75268 100644 --- a/Makefile +++ b/Makefile @@ -24,7 +24,7 @@ VERSION = 2012 PATCHLEVEL = 04 SUBLEVEL = -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else diff --git a/arch/sh/include/asm/mmc.h b/arch/sh/include/asm/mmc.h index 2c2ff21d01..85a530050e 100644 --- a/arch/sh/include/asm/mmc.h +++ b/arch/sh/include/asm/mmc.h @@ -15,4 +15,3 @@ int mmcif_mmc_init(void); #endif /* _SH_MMC_H_ */ - diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 1d09a72552..fda3e41a03 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -11,7 +11,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -34,16 +34,16 @@ #include DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ +#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) #define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_HYS) #define SPI_PAD_CTRL (PAD_CTL_HYS | \ @@ -176,11 +176,11 @@ int board_mmc_getcd(struct mmc *mmc) int ret; if (cfg->esdhc_base == USDHC3_BASE_ADDR) { - gpio_direction_input(192); /*GPIO7_0*/ - ret = !gpio_get_value(192); + gpio_direction_input(192); /*GPIO7_0*/ + ret = !gpio_get_value(192); } else { - gpio_direction_input(38); /*GPIO2_6*/ - ret = !gpio_get_value(38); + gpio_direction_input(38); /*GPIO2_6*/ + ret = !gpio_get_value(38); } return ret; @@ -192,23 +192,23 @@ int board_mmc_init(bd_t *bis) u32 index = 0; for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { - switch (index) { - case 0: - imx_iomux_v3_setup_multiple_pads( - usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - break; - case 1: - imx_iomux_v3_setup_multiple_pads( - usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); - break; - default: - printf("Warning: you configured more USDHC controllers" - "(%d) then supported by the board (%d)\n", - index + 1, CONFIG_SYS_FSL_USDHC_NUM); - return status; - } - - status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); + switch (index) { + case 0: + imx_iomux_v3_setup_multiple_pads( + usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + break; + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); + break; + default: + printf("Warning: you configured more USDHC controllers" + "(%d) then supported by the board (%d)\n", + index + 1, CONFIG_SYS_FSL_USDHC_NUM); + return status; + } + + status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); } return status; @@ -250,7 +250,7 @@ int board_phy_config(struct phy_device *phydev) MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf0f0); if (phydev->drv->config) phydev->drv->config(phydev); - + return 0; } diff --git a/doc/README.sbc8548 b/doc/README.sbc8548 index 0f3f5432f2..feac5e3e63 100644 --- a/doc/README.sbc8548 +++ b/doc/README.sbc8548 @@ -23,7 +23,7 @@ of each choice are listed below. Choice #1 does not enable CONFIG_PCI, and assumes that the PCI slot will be left empty (M66EN high), and so the board will operate with -a base clock of 66MHz. Note that you need both PCI enabled in u-boot +a base clock of 66MHz. Note that you need both PCI enabled in u-boot and linux in order to have functional PCI under linux. The second enables PCI support and builds for a 33MHz clock rate. Note @@ -37,29 +37,29 @@ card. [The above discussion assumes that the SW2[1-4] has not been changed to reflect a different CCB:SYSCLK ratio] The third option builds PCI support in, and leaves the clocking at the -default 66MHz. Options four and five are just repeats of option two +default 66MHz. Options four and five are just repeats of option two and three, but with PCI-e support enabled as well. PCI output listing with an intel e1000 PCI-x and a Syskonnect SK-9Exx -is shown below for sbc8548_PCI_66_PCIE_config. (Note that PCI-e with +is shown below for sbc8548_PCI_66_PCIE_config. (Note that PCI-e with a 33MHz PCI configuration is currently untested.) => pci 0 Scanning PCI devices on bus 0 - BusDevFun VendorId DeviceId Device Class Sub-Class + BusDevFun VendorId DeviceId Device Class Sub-Class _____________________________________________________________ - 00.00.00 0x1057 0x0012 Processor 0x20 - 00.01.00 0x8086 0x1026 Network controller 0x00 + 00.00.00 0x1057 0x0012 Processor 0x20 + 00.01.00 0x8086 0x1026 Network controller 0x00 => pci 1 Scanning PCI devices on bus 1 - BusDevFun VendorId DeviceId Device Class Sub-Class + BusDevFun VendorId DeviceId Device Class Sub-Class _____________________________________________________________ - 01.00.00 0x1957 0x0012 Processor 0x20 + 01.00.00 0x1957 0x0012 Processor 0x20 => pci 2 Scanning PCI devices on bus 2 - BusDevFun VendorId DeviceId Device Class Sub-Class + BusDevFun VendorId DeviceId Device Class Sub-Class _____________________________________________________________ - 02.00.00 0x1148 0x9e00 Network controller 0x00 + 02.00.00 0x1148 0x9e00 Network controller 0x00 => Memory Size and using SPD: @@ -80,10 +80,10 @@ You can also visually inspect the board to see if this hardware fix has been applied: 1) Remove R314 (RES-R0174-033, 1K, 0603). R314 is located on - the back of the PCB behind the DDR SDRAM SODIMM connector. + the back of the PCB behind the DDR SDRAM SODIMM connector. 2) Solder RES-R0174-033 (1K, 0603) resistor from R314 pin 2 pad - to R313 pin 2. Pin 2 for each resistor is the end of the - resistor closest to the CPU. + to R313 pin 2. Pin 2 for each resistor is the end of the + resistor closest to the CPU. Boards without the mod will have R314 and R313 in parallel, like "||". After the mod, they will be touching and form an "L" shape. @@ -155,7 +155,7 @@ Hardware Reference: =================== The following contains some summary information on hardware settings -that are relevant to u-boot, based on the board manual. For the +that are relevant to u-boot, based on the board manual. For the most up to date and complete details of the board, please request the reference manual ERG-00327-001.pdf from www.windriver.com diff --git a/doc/device-tree-bindings/i2c/tegra20-i2c.txt b/doc/device-tree-bindings/i2c/tegra20-i2c.txt index d601c17f9b..72649dffa3 100644 --- a/doc/device-tree-bindings/i2c/tegra20-i2c.txt +++ b/doc/device-tree-bindings/i2c/tegra20-i2c.txt @@ -4,10 +4,10 @@ Added in U-Boot: Required properties: - clocks : Two clocks must be given, each as a phandle to the Tegra's - CAR node and the clock number as a parameter: + CAR node and the clock number as a parameter: - the I2C clock to use for the peripheral - the pll_p_out3 clock, which can be used for fast operation. This - does not change and is the same for all I2C nodes. + does not change and is the same for all I2C nodes. Example: (TODO: merge with existing example): diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b6422d7d7a..38d6ae03d3 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -912,4 +912,3 @@ submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, dev, pipe, buffer, length, interval); return ehci_submit_async(dev, pipe, buffer, length, NULL); } - diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index f52c3c7637..3f7e51d877 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -10,7 +10,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -23,8 +23,8 @@ #define __CONFIG_H #define CONFIG_MX6Q -#define CONFIG_SYS_MX6_HCLK 24000000 -#define CONFIG_SYS_MX6_CLK32 32768 +#define CONFIG_SYS_MX6_HCLK 24000000 +#define CONFIG_SYS_MX6_CLK32 32768 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -38,14 +38,14 @@ #define CONFIG_REVISION_TAG /* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) #define CONFIG_ARCH_CPU_INIT #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART2_BASE +#define CONFIG_MXC_UART_BASE UART2_BASE #define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF @@ -75,10 +75,10 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII #define CONFIG_CMD_NET -#define CONFIG_FEC_MXC -#define CONFIG_MII +#define CONFIG_FEC_MXC +#define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 6 #define CONFIG_PHYLIB @@ -99,8 +99,8 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /* Command definition */ @@ -108,10 +108,10 @@ #undef CONFIG_CMD_IMLS -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 3 -#define CONFIG_LOADADDR 0x10800000 -#define CONFIG_SYS_TEXT_BASE 0x17800000 +#define CONFIG_LOADADDR 0x10800000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ @@ -123,33 +123,33 @@ "mmcpart=2\0" \ "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ + "root=${mmcroot}\0" \ "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ + "source\0" \ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm\0" \ + "run mmcargs; " \ + "bootm\0" \ "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "dhcp ${uimage}; bootm\0" \ + "run netargs; " \ + "dhcp ${uimage}; bootm\0" \ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev};" \ "if mmc rescan ${mmcdev}; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ "else run netboot; fi" #define CONFIG_ARP_TIMEOUT 200UL @@ -158,30 +158,30 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "MX6QSABRELITE U-Boot > " +#define CONFIG_SYS_PROMPT "MX6QSABRELITE U-Boot > " #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MEMTEST_START 0x10000000 -#define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_MEMTEST_END 0x10010000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE (128 * 1024) +#define CONFIG_STACKSIZE (128 * 1024) /* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR -#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE @@ -218,4 +218,4 @@ #define CONFIG_CMD_CACHE #endif -#endif /* __CONFIG_H */ +#endif /* __CONFIG_H */