From: Hans de Goede <hdegoede@redhat.com>
Date: Sat, 15 Aug 2015 09:55:26 +0000 (+0200)
Subject: sunxi_nand_spl: Use SYS_NAND_SELF_INIT and only do nand init when necessary
X-Git-Tag: v2015.10-rc3~40^2~21
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=f62bfa56daf17e3e8fac85795196c0ffad42e444;p=u-boot

sunxi_nand_spl: Use SYS_NAND_SELF_INIT and only do nand init when necessary

Use SYS_NAND_SELF_INIT and only setup the pinmux and clocks when we are
actually using the nand.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
---

diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 680523ac63..b76bb83251 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -31,6 +31,7 @@
 #include <asm/arch/usb_phy.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
+#include <nand.h>
 #include <net.h>
 
 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
@@ -127,6 +128,12 @@ static void nand_clock_setup(void)
 	setbits_le32(&ccm->ahb_gate0, (CLK_GATE_OPEN << AHB_GATE_OFFSET_NAND0));
 	setbits_le32(&ccm->nand0_clk_cfg, CCM_NAND_CTRL_ENABLE | AHB_DIV_1);
 }
+
+void board_nand_init(void)
+{
+	nand_pinmux_setup();
+	nand_clock_setup();
+}
 #endif
 
 #ifdef CONFIG_GENERIC_MMC
@@ -453,11 +460,6 @@ void sunxi_board_init(void)
 	power_failed |= axp221_set_eldo(3, CONFIG_AXP221_ELDO3_VOLT);
 #endif
 
-#ifdef CONFIG_SPL_NAND_SUNXI
-	nand_pinmux_setup();
-	nand_clock_setup();
-#endif
-
 	printf("DRAM:");
 	ramsize = sunxi_dram_init();
 	printf(" %lu MiB\n", ramsize >> 20);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index b6dfb0e835..28597f0c8b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -95,6 +95,7 @@ config SPL_NAND_DENALI
 config SPL_NAND_SUNXI
 	bool "Support for NAND on Allwinner A20 in SPL"
 	depends on MACH_SUN7I
+	select SYS_NAND_SELF_INIT
 	---help---
 	Enable support for NAND. This option allows SPL to read from
 	sunxi NAND using DMA transfers.
diff --git a/drivers/mtd/nand/sunxi_nand_spl.c b/drivers/mtd/nand/sunxi_nand_spl.c
index f6f49289f8..9efe904cc7 100644
--- a/drivers/mtd/nand/sunxi_nand_spl.c
+++ b/drivers/mtd/nand/sunxi_nand_spl.c
@@ -153,6 +153,8 @@ void nand_init(void)
 {
 	uint32_t val;
 
+	board_nand_init();
+
 	val = readl(SUNXI_NFC_BASE + NFC_CTL);
 	/* enable and reset CTL */
 	writel(val | NFC_CTL_EN | NFC_CTL_RESET,