From: Magnus Lilja Date: Wed, 11 Nov 2009 19:18:43 +0000 (+0100) Subject: mxc_nand: Update driver to work with i.MX31. X-Git-Tag: v2010.03-rc1~130^2~2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=f6a9748e3261fdccdeb78a2b58e6ad538ba54496;p=u-boot mxc_nand: Update driver to work with i.MX31. Tested on i.MX31 Litekit. Signed-off-by: Magnus Lilja --- diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index eb0323f213..fc111b5bb6 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -149,6 +149,36 @@ static struct nand_ecclayout nand_soft_eccoob = { }; #endif +#ifdef CONFIG_MX27 +static int is_16bit_nand(void) +{ + struct system_control_regs *sc_regs = + (struct system_control_regs *)IMX_SYSTEM_CTL_BASE; + + if (readl(&sc_regs->fmcr) & NF_16BIT_SEL) + return 1; + else + return 0; +} +#elif defined(CONFIG_MX31) +static int is_16bit_nand(void) +{ + struct clock_control_regs *sc_regs = + (struct clock_control_regs *)CCM_BASE; + + if (readl(&sc_regs->rcsr) & CCM_RCSR_NF16B) + return 1; + else + return 0; +} +#else +#warning "8/16 bit NAND autodetection not supported" +static int is_16bit_nand(void) +{ + return 0; +} +#endif + static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size) { uint32_t *d = dest; @@ -808,8 +838,6 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, int board_nand_init(struct nand_chip *this) { - struct system_control_regs *sc_regs = - (struct system_control_regs *)IMX_SYSTEM_CTL_BASE; struct mtd_info *mtd; uint16_t tmp; int err = 0; @@ -871,7 +899,7 @@ int board_nand_init(struct nand_chip *this) writew(0x4, &host->regs->nfc_wrprot); /* NAND bus width determines access funtions used by upper layer */ - if (readl(&sc_regs->fmcr) & NF_16BIT_SEL) + if (is_16bit_nand()) this->options |= NAND_BUSWIDTH_16; host->pagesize_2k = 0;