From: Koen Kooi Date: Mon, 18 Apr 2011 21:28:32 +0000 (-0400) Subject: OMAP3: BeagleBoard: add xM rev B to ID table X-Git-Tag: v2011.06-rc1~131^2~52 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=f6e593bb1255d1e15201cb5dec8c95264489e729;p=u-boot OMAP3: BeagleBoard: add xM rev B to ID table Patch was updated by Jason Kridner : * Use tabs to match style of other board revisions * Only include board revisions that exist * Default to the same configuration as the latest revision, but without setting 'beaglerev' Signed-off-by: Koen Kooi Signed-off-by: Jason Kridner Signed-off-by: Sandeep Paulraj --- diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 2fdee7c08b..03dac0d934 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -164,18 +164,15 @@ int misc_init_r(void) case REVISION_AXBX: printf("Beagle Rev Ax/Bx\n"); setenv("beaglerev", "AxBx"); - setenv("mpurate", "600"); break; case REVISION_CX: printf("Beagle Rev C1/C2/C3\n"); setenv("beaglerev", "Cx"); - setenv("mpurate", "600"); MUX_BEAGLE_C(); break; case REVISION_C4: printf("Beagle Rev C4\n"); setenv("beaglerev", "C4"); - setenv("mpurate", "720"); MUX_BEAGLE_C(); /* Set VAUX2 to 1.8V for EHCI PHY */ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, @@ -183,10 +180,19 @@ int misc_init_r(void) TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, TWL4030_PM_RECEIVER_DEV_GRP_P1); break; - case REVISION_XM: + case REVISION_XM_A: printf("Beagle xM Rev A\n"); setenv("beaglerev", "xMA"); - setenv("mpurate", "1000"); + MUX_BEAGLE_XM(); + /* Set VAUX2 to 1.8V for EHCI PHY */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, + TWL4030_PM_RECEIVER_VAUX2_VSEL_18, + TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); + break; + case REVISION_XM_B: + printf("Beagle xM Rev B\n"); + setenv("beaglerev", "xMB"); MUX_BEAGLE_XM(); /* Set VAUX2 to 1.8V for EHCI PHY */ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, @@ -196,6 +202,12 @@ int misc_init_r(void) break; default: printf("Beagle unknown 0x%02x\n", get_board_revision()); + MUX_BEAGLE_XM(); + /* Set VAUX2 to 1.8V for EHCI PHY */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, + TWL4030_PM_RECEIVER_VAUX2_VSEL_18, + TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); } switch (get_expansion_id()) { diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index b22b65337d..b0e26e5081 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -37,7 +37,8 @@ const omap3_sysinfo sysinfo = { #define REVISION_AXBX 0x7 #define REVISION_CX 0x6 #define REVISION_C4 0x5 -#define REVISION_XM 0x0 +#define REVISION_XM_A 0x0 +#define REVISION_XM_B 0x1 /* * IEN - Input Enable diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index bfde910f04..2bf6c3a285 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -203,7 +203,7 @@ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ "console=ttyS2,115200n8\0" \ - "mpurate=500\0" \ + "mpurate=auto\0" \ "vram=12M\0" \ "dvimode=1024x768MR-16@60\0" \ "defaultdisplay=dvi\0" \