From: Kern Sibbald <kern@sibbald.com>
Date: Fri, 4 Jan 2008 16:14:19 +0000 (+0000)
Subject: Update
X-Git-Tag: Release-3.0.0~2044
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=f7b1fb8bf6e79d1cae10a6b96663185943158a20;p=bacula%2Fbacula

Update

git-svn-id: https://bacula.svn.sourceforge.net/svnroot/bacula/trunk@6206 91ce42f0-d328-0410-95d8-f526ca767f89
---

diff --git a/regress/tests/two-pool-2t1da-tape b/regress/tests/two-pool-2t1da-tape
new file mode 100755
index 0000000000..efbd37bcad
--- /dev/null
+++ b/regress/tests/two-pool-2t1da-tape
@@ -0,0 +1,80 @@
+#!/bin/sh
+#
+# This is Arno's test.  It uses two pools, two tapes, and
+#  an autochanger. Note, the Director has three Pools in its 
+#  conf:  Default, Full, and Inc.  Default is used in the
+#  NightlySave job by default.  What is backed up is what
+#  is in ${cwd}/tmp/file-list, which is by default the Bacula
+#  source code (i.e. the build directory).
+#
+TestName="two-pool-2t1da-tape"
+JobName=twopooltape
+. scripts/functions
+
+if test x${AUTOCHANGER} = x/dev/null ; then
+   echo "two-pool-tape test skipped. No autochanger."
+   exit
+fi
+
+scripts/cleanup
+scripts/copy-2tape-confs
+echo "Prepare two tapes"
+scripts/prepare-two-tapes
+echo "Done prepare two tapes"
+ 
+# Make a relatively large backup set 5 x source code directory
+echo "${cwd}/build" >${cwd}/tmp/file-list
+echo "${cwd}/build" >>${cwd}/tmp/file-list
+echo "${cwd}/build" >>${cwd}/tmp/file-list
+echo "${cwd}/build" >>${cwd}/tmp/file-list
+echo "${cwd}/build" >>${cwd}/tmp/file-list
+
+start_test
+
+# Write out bconsole commands to a file
+cat <<END_OF_DATA >tmp/bconcmds
+@output /dev/null
+messages
+@$out tmp/log1.out
+label storage=DDS-4 volume=TestVolume001 slot=1 pool=Full drive=0
+label storage=DDS-4 volume=TestVolume002 slot=2 pool=Default drive=0
+list volumes
+@# Start job with Client run before and sleep
+run job=NightlySave1 level=Full pool=Default yes
+run job=NightlySave1 level=Full pool=Default yes
+run job=NightlySave1 level=Full pool=Default yes
+@# wait between starting jobs
+@sleep 60
+@#setdebug level=100 storage=DDS-4
+run job=NightlySave2 level=Full pool=Full yes
+run job=NightlySave2 level=Full pool=Full yes
+run job=NightlySave2 level=Full pool=Full yes
+@sleep 10
+messages
+@sleep 10
+messages
+@sleep 10
+status storage=DDS-4
+messages
+wait
+list volumes
+messages
+@# 
+@# now do a restore
+@#
+@$out tmp/log2.out
+restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
+yes
+wait
+messages
+@$out
+quit
+END_OF_DATA
+
+run_bacula
+check_for_zombie_jobs storage=DDS-4
+stop_bacula
+
+check_two_logs
+check_restore_diff
+end_test
diff --git a/regress/tests/two-pool-tape b/regress/tests/two-pool-tape
deleted file mode 100755
index efbd37bcad..0000000000
--- a/regress/tests/two-pool-tape
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/sh
-#
-# This is Arno's test.  It uses two pools, two tapes, and
-#  an autochanger. Note, the Director has three Pools in its 
-#  conf:  Default, Full, and Inc.  Default is used in the
-#  NightlySave job by default.  What is backed up is what
-#  is in ${cwd}/tmp/file-list, which is by default the Bacula
-#  source code (i.e. the build directory).
-#
-TestName="two-pool-2t1da-tape"
-JobName=twopooltape
-. scripts/functions
-
-if test x${AUTOCHANGER} = x/dev/null ; then
-   echo "two-pool-tape test skipped. No autochanger."
-   exit
-fi
-
-scripts/cleanup
-scripts/copy-2tape-confs
-echo "Prepare two tapes"
-scripts/prepare-two-tapes
-echo "Done prepare two tapes"
- 
-# Make a relatively large backup set 5 x source code directory
-echo "${cwd}/build" >${cwd}/tmp/file-list
-echo "${cwd}/build" >>${cwd}/tmp/file-list
-echo "${cwd}/build" >>${cwd}/tmp/file-list
-echo "${cwd}/build" >>${cwd}/tmp/file-list
-echo "${cwd}/build" >>${cwd}/tmp/file-list
-
-start_test
-
-# Write out bconsole commands to a file
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 pool=Full drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 pool=Default drive=0
-list volumes
-@# Start job with Client run before and sleep
-run job=NightlySave1 level=Full pool=Default yes
-run job=NightlySave1 level=Full pool=Default yes
-run job=NightlySave1 level=Full pool=Default yes
-@# wait between starting jobs
-@sleep 60
-@#setdebug level=100 storage=DDS-4
-run job=NightlySave2 level=Full pool=Full yes
-run job=NightlySave2 level=Full pool=Full yes
-run job=NightlySave2 level=Full pool=Full yes
-@sleep 10
-messages
-@sleep 10
-messages
-@sleep 10
-status storage=DDS-4
-messages
-wait
-list volumes
-messages
-@# 
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test