From: Masahiro Yamada Date: Mon, 15 Dec 2014 14:26:29 +0000 (+0900) Subject: mpc8260: remove CPU86, CPU87 board support X-Git-Tag: v2015.01~62 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=f7e1af8690f423e44932f412033e718576477467;p=u-boot mpc8260: remove CPU86, CPU87 board support These boards are still non-generic boards. Signed-off-by: Masahiro Yamada Cc: Wolfgang Denk --- diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig index 599b0212ad..eab45140b8 100644 --- a/arch/powerpc/cpu/mpc8260/Kconfig +++ b/arch/powerpc/cpu/mpc8260/Kconfig @@ -10,20 +10,12 @@ choice config TARGET_ATC bool "Support atc" -config TARGET_CPU86 - bool "Support CPU86" - -config TARGET_CPU87 - bool "Support CPU87" - config TARGET_KM82XX bool "Support km82xx" endchoice source "board/atc/Kconfig" -source "board/cpu86/Kconfig" -source "board/cpu87/Kconfig" source "board/keymile/km82xx/Kconfig" endmenu diff --git a/board/cpu86/Kconfig b/board/cpu86/Kconfig deleted file mode 100644 index ac3ae9886e..0000000000 --- a/board/cpu86/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_CPU86 - -config SYS_BOARD - default "cpu86" - -config SYS_CONFIG_NAME - default "CPU86" - -endif diff --git a/board/cpu86/MAINTAINERS b/board/cpu86/MAINTAINERS deleted file mode 100644 index 06bdd0d37d..0000000000 --- a/board/cpu86/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -CPU86 BOARD -M: Wolfgang Denk -S: Maintained -F: board/cpu86/ -F: include/configs/CPU86.h -F: configs/CPU86_defconfig -F: configs/CPU86_ROMBOOT_defconfig diff --git a/board/cpu86/Makefile b/board/cpu86/Makefile deleted file mode 100644 index da83afd700..0000000000 --- a/board/cpu86/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = cpu86.o flash.o diff --git a/board/cpu86/cpu86.c b/board/cpu86/cpu86.c deleted file mode 100644 index 929291052f..0000000000 --- a/board/cpu86/cpu86.c +++ /dev/null @@ -1,304 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include "cpu86.h" - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */ - /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */ - /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */ - /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */ - /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */ - /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */ - /* PA25 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MII MDIO */ - /* PA24 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MII MDC */ - /* PA23 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 MII MDIO */ - /* PA22 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 MII MDC */ - /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */ - /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */ - /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */ - /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */ - /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */ - /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */ - /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */ - /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */ - /* PA13 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MII TXSL1 */ - /* PA12 */ { 1, 0, 0, 1, 0, 1 }, /* FCC2 MII TXSL0 */ - /* PA11 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 MII TXSL1 */ - /* PA10 */ { 1, 0, 0, 1, 0, 1 }, /* FCC1 MII TXSL0 */ - /* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 TXD */ - /* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 RXD */ - /* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */ - /* PA6 */ { 1, 0, 0, 1, 0, 1 }, /* FCC2 MII PAUSE */ - /* PA5 */ { 1, 0, 0, 1, 0, 1 }, /* FCC1 MII PAUSE */ - /* PA4 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MII PWRDN */ - /* PA3 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 MII PWRDN */ - /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */ - /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FCC2 MII MDINT */ - /* PA0 */ { 1, 0, 0, 1, 0, 0 } /* FCC1 MII MDINT */ - }, - - /* Port B configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ - /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */ - /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */ - /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* PB15 */ - /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* PB14 */ - /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */ - /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* PB12 */ - /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* PB11 */ - /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* PB10 */ - /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* PB9 */ - /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* PB8 */ - /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */ - /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */ - /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */ - /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* PB3 */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* PB2 */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* PB1 */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* PB0 */ - }, - - /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */ - /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */ - /* PC29 */ { 1, 0, 0, 0, 0, 0 }, /* SCC1 CTS */ - /* PC28 */ { 1, 0, 0, 0, 0, 0 }, /* SCC2 CTS */ - /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */ - /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */ - /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */ - /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */ - /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* FDC37C78 DACFD */ - /* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* FDC37C78 DNFD */ - /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */ - /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */ - /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */ - /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */ - /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */ - /* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */ - /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */ - /* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */ - /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */ - /* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */ - /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */ - /* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */ - /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* FC9 */ - /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */ - /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */ - /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */ - /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */ - /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */ - /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */ - /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */ - /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */ - /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* FDC37C78 DRQFD */ - }, - - /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RXD */ - /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 TXD */ - /* PD29 */ { 1, 0, 0, 1, 0, 0 }, /* SCC1 RTS */ - /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RXD */ - /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 TXD */ - /* PD26 */ { 1, 0, 0, 1, 0, 0 }, /* SCC2 RTS */ - /* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */ - /* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */ - /* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */ - /* PD22 */ { 0, 0, 0, 0, 0, 0 }, /* PD22 */ - /* PD21 */ { 0, 0, 0, 0, 0, 0 }, /* PD21 */ - /* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD20 */ - /* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */ - /* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */ - /* PD17 */ { 0, 0, 0, 0, 0, 0 }, /* PD17 */ - /* PD16 */ { 0, 0, 0, 0, 0, 0 }, /* PD16 */ -#if defined(CONFIG_SYS_I2C_SOFT) - /* PD15 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SDA */ - /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SCL */ -#else -#if defined(CONFIG_HARD_I2C) - /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ -#else /* normal I/O port pins */ - /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ -#endif -#endif - /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ - /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ - /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ - /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ - /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ - /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ - /* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */ - /* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */ - /* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */ - /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* PD3 */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* PD2 */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* PD1 */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* PD0 */ - } -}; - -/* ------------------------------------------------------------------------- */ - -/* Check Board Identity: - */ -int checkboard (void) -{ - printf ("Board: CPU86 (Rev %02x)\n", CPU86_REV); - return 0; -} - -/* ------------------------------------------------------------------------- */ - -/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx - * - * This routine performs standard 8260 initialization sequence - * and calculates the available memory size. It may be called - * several times to try different SDRAM configurations on both - * 60x and local buses. - */ -static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, - ulong orx, volatile uchar * base) -{ - volatile uchar c = 0xff; - volatile uint *sdmr_ptr; - volatile uint *orx_ptr; - ulong maxsize, size; - int i; - - /* We must be able to test a location outsize the maximum legal size - * to find out THAT we are outside; but this address still has to be - * mapped by the controller. That means, that the initial mapping has - * to be (at least) twice as large as the maximum expected size. - */ - maxsize = (1 + (~orx | 0x7fff)) / 2; - - /* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that - * we are configuring CS1 if base != 0 - */ - sdmr_ptr = &memctl->memc_psdmr; - orx_ptr = &memctl->memc_or2; - - *orx_ptr = orx; - - /* - * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): - * - * "At system reset, initialization software must set up the - * programmable parameters in the memory controller banks registers - * (ORx, BRx, P/LSDMR). After all memory parameters are configured, - * system software should execute the following initialization sequence - * for each SDRAM device. - * - * 1. Issue a PRECHARGE-ALL-BANKS command - * 2. Issue eight CBR REFRESH commands - * 3. Issue a MODE-SET command to initialize the mode register - * - * The initial commands are executed by setting P/LSDMR[OP] and - * accessing the SDRAM with a single-byte transaction." - * - * The appropriate BRx/ORx registers have already been set when we - * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. - */ - - *sdmr_ptr = sdmr | PSDMR_OP_PREA; - *base = c; - - *sdmr_ptr = sdmr | PSDMR_OP_CBRR; - for (i = 0; i < 8; i++) - *base = c; - - *sdmr_ptr = sdmr | PSDMR_OP_MRW; - *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */ - - *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; - *base = c; - - size = get_ram_size((long *)base, maxsize); - - *orx_ptr = orx | ~(size - 1); - - return (size); -} - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; - -#ifndef CONFIG_SYS_RAMBOOT - ulong size8, size9; -#endif - long psize; - - psize = 32 * 1024 * 1024; - - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - memctl->memc_psrt = CONFIG_SYS_PSRT; - -#ifndef CONFIG_SYS_RAMBOOT - /* 60x SDRAM setup: - */ - size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL, - (uchar *) CONFIG_SYS_SDRAM_BASE); - size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL, - (uchar *) CONFIG_SYS_SDRAM_BASE); - - if (size8 < size9) { - psize = size9; - printf ("(60x:9COL) "); - } else { - psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL, - (uchar *) CONFIG_SYS_SDRAM_BASE); - printf ("(60x:8COL) "); - } - -#endif /* CONFIG_SYS_RAMBOOT */ - - icache_enable (); - - return (psize); -} - -#if defined(CONFIG_CMD_DOC) -void doc_init (void) -{ - doc_probe (CONFIG_SYS_DOC_BASE); -} -#endif diff --git a/board/cpu86/cpu86.h b/board/cpu86/cpu86.h deleted file mode 100644 index ca0c39f6b8..0000000000 --- a/board/cpu86/cpu86.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __BOARD_CPU86__ -#define __BOARD_CPU86__ - -#include - -#define REG8(x) (*(volatile unsigned char *)(x)) - -/* CPU86 register definitions */ -#define CPU86_VME_EAC REG8(CONFIG_SYS_BCRS_BASE + 0x00) -#define CPU86_VME_SAC REG8(CONFIG_SYS_BCRS_BASE + 0x01) -#define CPU86_VME_MAC REG8(CONFIG_SYS_BCRS_BASE + 0x02) -#define CPU86_BCR REG8(CONFIG_SYS_BCRS_BASE + 0x03) -#define CPU86_BSR REG8(CONFIG_SYS_BCRS_BASE + 0x04) -#define CPU86_WDOG_RPORT REG8(CONFIG_SYS_BCRS_BASE + 0x05) -#define CPU86_MBOX_IRQ REG8(CONFIG_SYS_BCRS_BASE + 0x04) -#define CPU86_REV REG8(CONFIG_SYS_BCRS_BASE + 0x07) -#define CPU86_VME_IRQMASK REG8(CONFIG_SYS_BCRS_BASE + 0x80) -#define CPU86_VME_IRQSTATUS REG8(CONFIG_SYS_BCRS_BASE + 0x81) -#define CPU86_LOCAL_IRQMASK REG8(CONFIG_SYS_BCRS_BASE + 0x82) -#define CPU86_LOCAL_IRQSTATUS REG8(CONFIG_SYS_BCRS_BASE + 0x83) -#define CPU86_PMCL_IRQSTATUS REG8(CONFIG_SYS_BCRS_BASE + 0x84) - -/* Board Control Register bits */ -#define CPU86_BCR_FWPT 0x01 -#define CPU86_BCR_FWRE 0x02 - -#endif /* __BOARD_CPU86__ */ diff --git a/board/cpu86/flash.c b/board/cpu86/flash.c deleted file mode 100644 index b99a9a089b..0000000000 --- a/board/cpu86/flash.c +++ /dev/null @@ -1,599 +0,0 @@ -/* - * (C) Copyright 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Flash Routines for Intel devices - * - *-------------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include "cpu86.h" - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -/*----------------------------------------------------------------------- - */ -ulong flash_int_get_size (volatile unsigned long *baseaddr, - flash_info_t * info) -{ - short i; - unsigned long flashtest_h, flashtest_l; - - info->sector_count = info->size = 0; - info->flash_id = FLASH_UNKNOWN; - - /* Write identify command sequence and test FLASH answer - */ - baseaddr[0] = 0x00900090; - baseaddr[1] = 0x00900090; - - flashtest_h = baseaddr[0]; /* manufacturer ID */ - flashtest_l = baseaddr[1]; - - if (flashtest_h != INTEL_MANUFACT || flashtest_l != INTEL_MANUFACT) - return (0); /* no or unknown flash */ - - flashtest_h = baseaddr[2]; /* device ID */ - flashtest_l = baseaddr[3]; - - if (flashtest_h != flashtest_l) - return (0); - - switch (flashtest_h) { - case INTEL_ID_28F160C3B: - info->flash_id = FLASH_28F160C3B; - info->sector_count = 39; - info->size = 0x00800000; /* 4 * 2 MB = 8 MB */ - break; - case INTEL_ID_28F160F3B: - info->flash_id = FLASH_28F160F3B; - info->sector_count = 39; - info->size = 0x00800000; /* 4 * 2 MB = 8 MB */ - break; - default: - return (0); /* no or unknown flash */ - } - - info->flash_id |= INTEL_MANUFACT << 16; /* set manufacturer offset */ - - if (info->flash_id & FLASH_BTYPE) { - volatile unsigned long *tmp = baseaddr; - - /* set up sector start adress table (bottom sector type) - * AND unlock the sectors (if our chip is 160C3) - */ - for (i = 0; i < info->sector_count; i++) { - if ((info->flash_id & FLASH_TYPEMASK) == FLASH_28F160C3B) { - tmp[0] = 0x00600060; - tmp[1] = 0x00600060; - tmp[0] = 0x00D000D0; - tmp[1] = 0x00D000D0; - } - info->start[i] = (uint) tmp; - tmp += i < 8 ? 0x2000 : 0x10000; /* pointer arith */ - } - } - - memset (info->protect, 0, info->sector_count); - - baseaddr[0] = 0x00FF00FF; - baseaddr[1] = 0x00FF00FF; - - return (info->size); -} - -static ulong flash_amd_get_size (vu_char *addr, flash_info_t *info) -{ - short i; - uchar vendor, devid; - ulong base = (ulong)addr; - - /* Write auto select command: read Manufacturer ID */ - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - addr[0x0555] = 0x90; - - udelay(1000); - - vendor = addr[0]; - devid = addr[1] & 0xff; - - /* only support AMD */ - if (vendor != 0x01) { - return 0; - } - - vendor &= 0xf; - devid &= 0xff; - - if (devid == AMD_ID_F040B) { - info->flash_id = vendor << 16 | devid; - info->sector_count = 8; - info->size = info->sector_count * 0x10000; - } - else if (devid == AMD_ID_F080B) { - info->flash_id = vendor << 16 | devid; - info->sector_count = 16; - info->size = 4 * info->sector_count * 0x10000; - } - else if (devid == AMD_ID_F016D) { - info->flash_id = vendor << 16 | devid; - info->sector_count = 32; - info->size = 4 * info->sector_count * 0x10000; - } - else { - printf ("## Unknown Flash Type: %02x\n", devid); - return 0; - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* sector base address */ - info->start[i] = base + i * (info->size / info->sector_count); - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned char *)(info->start[i]); - info->protect[i] = addr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (vu_char *)info->start[0]; - addr[0] = 0xF0; /* reset bank */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ -unsigned long flash_init (void) -{ - unsigned long size_b0 = 0; - unsigned long size_b1 = 0; - int i; - - /* Init: no FLASHes known - */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Disable flash protection */ - CPU86_BCR |= (CPU86_BCR_FWPT | CPU86_BCR_FWRE); - - /* Static FLASH Bank configuration here (only one bank) */ - - size_b0 = flash_int_get_size ((ulong *) CONFIG_SYS_FLASH_BASE, &flash_info[0]); - size_b1 = flash_amd_get_size ((uchar *) CONFIG_SYS_BOOTROM_BASE, &flash_info[1]); - - if (size_b0 > 0 || size_b1 > 0) { - - printf("("); - - if (size_b0 > 0) { - puts ("Bank#1 - "); - print_size (size_b0, (size_b1 > 0) ? ", " : ") "); - } - - if (size_b1 > 0) { - puts ("Bank#2 - "); - print_size (size_b1, ") "); - } - } - else { - printf ("## No FLASH found.\n"); - return 0; - } - /* protect monitor and environment sectors - */ - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_BOOTROM_BASE - if (size_b1) { - /* If U-Boot is booted from ROM the CONFIG_SYS_MONITOR_BASE > CONFIG_SYS_FLASH_BASE - * but we shouldn't protect it. - */ - - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[1] - ); - } -#else -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0] - ); -#endif -#endif - -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif -# if CONFIG_ENV_ADDR >= CONFIG_SYS_BOOTROM_BASE - if (size_b1) { - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[1]); - } -# else - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); -# endif -#endif - - return (size_b0 + size_b1); -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch ((info->flash_id >> 16) & 0xff) { - case 0x89: - printf ("INTEL "); - break; - case 0x1: - printf ("AMD "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F160C3B: - printf ("28F160C3B (16 Mbit, bottom sector)\n"); - break; - case FLASH_28F160F3B: - printf ("28F160F3B (16 Mbit, bottom sector)\n"); - break; - case AMD_ID_F040B: - printf ("AM29F040B (4 Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - if (info->size < 0x100000) - printf (" Size: %ld KB in %d Sectors\n", - info->size >> 10, info->sector_count); - else - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - vu_char *addr = (vu_char *)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect]) - prot++; - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Check the type of erased flash - */ - if (info->flash_id >> 16 == 0x1) { - /* Erase AMD flash - */ - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - addr[0x0555] = 0x80; - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_char *)(info->start[sect]); - addr[0] = 0x30; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto AMD_DONE; - - start = get_timer (0); - last = start; - addr = (vu_char *)(info->start[l_sect]); - while ((addr[0] & 0x80) != 0x80) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - serial_putc ('.'); - last = now; - } - } - -AMD_DONE: - /* reset to read mode */ - addr = (volatile unsigned char *)info->start[0]; - addr[0] = 0xF0; /* reset bank */ - - } else { - /* Erase Intel flash - */ - - /* Start erase on unprotected sectors - */ - for (sect = s_first; sect <= s_last; sect++) { - volatile ulong *addr = - (volatile unsigned long *) info->start[sect]; - - start = get_timer (0); - last = start; - if (info->protect[sect] == 0) { - /* Disable interrupts which might cause a timeout here - */ - flag = disable_interrupts (); - - /* Erase the block - */ - addr[0] = 0x00200020; - addr[1] = 0x00200020; - addr[0] = 0x00D000D0; - addr[1] = 0x00D000D0; - - /* re-enable interrupts if necessary - */ - if (flag) - enable_interrupts (); - - /* wait at least 80us - let's wait 1 ms - */ - udelay (1000); - - last = start; - while ((addr[0] & 0x00800080) != 0x00800080 || - (addr[1] & 0x00800080) != 0x00800080) { - if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout (erase suspended!)\n"); - /* Suspend erase - */ - addr[0] = 0x00B000B0; - addr[1] = 0x00B000B0; - goto DONE; - } - /* show that we're waiting - */ - if ((now - last) > 1000) { /* every second */ - serial_putc ('.'); - last = now; - } - } - if (addr[0] & 0x00220022 || addr[1] & 0x00220022) { - printf ("*** ERROR: erase failed!\n"); - goto DONE; - } - } - /* Clear status register and reset to read mode - */ - addr[0] = 0x00500050; - addr[1] = 0x00500050; - addr[0] = 0x00FF00FF; - addr[1] = 0x00FF00FF; - } - } - - printf (" done\n"); - -DONE: - return 0; -} - -static int write_word (flash_info_t *, volatile unsigned long *, ulong); -static int write_byte (flash_info_t *info, ulong dest, uchar data); - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong v; - int i, l, rc, cc = cnt, res = 0; - - if (info->flash_id >> 16 == 0x1) { - - /* Write to AMD 8-bit flash - */ - while (cnt > 0) { - if ((rc = write_byte(info, addr, *src)) != 0) { - return (rc); - } - addr++; - src++; - cnt--; - } - - return (0); - } else { - - /* Write to Intel 64-bit flash - */ - for (v=0; cc > 0; addr += 4, cc -= 4 - l) { - l = (addr & 3); - addr &= ~3; - - for (i = 0; i < 4; i++) { - v = (v << 8) + (i < l || i - l >= cc ? - *((unsigned char *) addr + i) : *src++); - } - - if ((res = write_word (info, (volatile unsigned long *) addr, v)) != 0) - break; - } - } - - return (res); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t * info, volatile unsigned long *addr, - ulong data) -{ - int flag, res = 0; - ulong start; - - /* Check if Flash is (sufficiently) erased - */ - if ((*addr & data) != data) - return (2); - - /* Disable interrupts which might cause a timeout here - */ - flag = disable_interrupts (); - - *addr = 0x00400040; - *addr = data; - - /* re-enable interrupts if necessary - */ - if (flag) - enable_interrupts (); - - start = get_timer (0); - while ((*addr & 0x00800080) != 0x00800080) { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - /* Suspend program - */ - *addr = 0x00B000B0; - res = 1; - goto OUT; - } - } - - if (*addr & 0x00220022) { - printf ("*** ERROR: program failed!\n"); - res = 1; - } - -OUT: - /* Clear status register and reset to read mode - */ - *addr = 0x00500050; - *addr = 0x00FF00FF; - - return (res); -} - -/*----------------------------------------------------------------------- - * Write a byte to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_byte (flash_info_t *info, ulong dest, uchar data) -{ - vu_char *addr = (vu_char *)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_char *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - addr[0x0555] = 0xA0; - - *((vu_char *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/cpu87/Kconfig b/board/cpu87/Kconfig deleted file mode 100644 index a4f2768cdb..0000000000 --- a/board/cpu87/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_CPU87 - -config SYS_BOARD - default "cpu87" - -config SYS_CONFIG_NAME - default "CPU87" - -endif diff --git a/board/cpu87/MAINTAINERS b/board/cpu87/MAINTAINERS deleted file mode 100644 index 32804ea53c..0000000000 --- a/board/cpu87/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -CPU87 BOARD -#M: - -S: Maintained -F: board/cpu87/ -F: include/configs/CPU87.h -F: configs/CPU87_defconfig -F: configs/CPU87_ROMBOOT_defconfig diff --git a/board/cpu87/Makefile b/board/cpu87/Makefile deleted file mode 100644 index 0d59bbbb38..0000000000 --- a/board/cpu87/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = cpu87.o flash.o diff --git a/board/cpu87/cpu87.c b/board/cpu87/cpu87.c deleted file mode 100644 index 01f90d2ebb..0000000000 --- a/board/cpu87/cpu87.c +++ /dev/null @@ -1,330 +0,0 @@ -/* - * (C) Copyright 2001-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include "cpu87.h" -#include -#include - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */ - /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */ - /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */ - /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */ - /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */ - /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */ - /* PA25 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MII MDIO */ - /* PA24 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MII MDC */ - /* PA23 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 MII MDIO */ - /* PA22 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 MII MDC */ - /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */ - /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */ - /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */ - /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */ - /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */ - /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */ - /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */ - /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */ - /* PA13 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MII TXSL1 */ - /* PA12 */ { 1, 0, 0, 1, 0, 1 }, /* FCC2 MII TXSL0 */ - /* PA11 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 MII TXSL1 */ - /* PA10 */ { 1, 0, 0, 1, 0, 1 }, /* FCC1 MII TXSL0 */ - /* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 TXD */ - /* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 RXD */ - /* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */ - /* PA6 */ { 1, 0, 0, 1, 0, 1 }, /* FCC2 MII PAUSE */ - /* PA5 */ { 1, 0, 0, 1, 0, 1 }, /* FCC1 MII PAUSE */ - /* PA4 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MII PWRDN */ - /* PA3 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 MII PWRDN */ - /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */ - /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FCC2 MII MDINT */ - /* PA0 */ { 1, 0, 0, 1, 0, 0 } /* FCC1 MII MDINT */ - }, - - /* Port B configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ - /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */ - /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */ - /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* PB15 */ - /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* PB14 */ - /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */ - /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* PB12 */ - /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* PB11 */ - /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* PB10 */ - /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* PB9 */ - /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* PB8 */ - /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */ - /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */ - /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */ - /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* PB3 */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* PB2 */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* PB1 */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* PB0 */ - }, - - /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */ - /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */ - /* PC29 */ { 1, 0, 0, 0, 0, 0 }, /* SCC1 CTS */ - /* PC28 */ { 1, 0, 0, 0, 0, 0 }, /* SCC2 CTS */ - /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */ - /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */ - /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */ - /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */ - /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* FDC37C78 DACFD */ - /* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* FDC37C78 DNFD */ - /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */ - /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */ - /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */ - /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */ - /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */ - /* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */ - /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */ - /* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */ - /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */ - /* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */ - /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */ - /* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */ - /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* FC9 */ - /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */ - /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */ - /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */ - /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */ - /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */ - /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */ - /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */ - /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */ - /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* FDC37C78 DRQFD */ - }, - - /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RXD */ - /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 TXD */ - /* PD29 */ { 1, 0, 0, 1, 0, 0 }, /* SCC1 RTS */ - /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RXD */ - /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 TXD */ - /* PD26 */ { 1, 0, 0, 1, 0, 0 }, /* SCC2 RTS */ - /* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */ - /* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */ - /* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */ - /* PD22 */ { 0, 0, 0, 0, 0, 0 }, /* PD22 */ - /* PD21 */ { 0, 0, 0, 0, 0, 0 }, /* PD21 */ - /* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD20 */ - /* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */ - /* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */ - /* PD17 */ { 0, 0, 0, 0, 0, 0 }, /* PD17 */ - /* PD16 */ { 0, 0, 0, 0, 0, 0 }, /* PD16 */ -#if defined(CONFIG_SYS_I2C_SOFT) - /* PD15 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SDA */ - /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SCL */ -#else -#if defined(CONFIG_HARD_I2C) - /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ -#else /* normal I/O port pins */ - /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ -#endif -#endif - /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ - /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ - /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ - /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ - /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ - /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ - /* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */ - /* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */ - /* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */ - /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* PD3 */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* PD2 */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* PD1 */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* PD0 */ - } -}; - -/* ------------------------------------------------------------------------- */ - -/* Check Board Identity: - */ -int checkboard (void) -{ - printf ("Board: CPU87 (Rev %02x)\n", CPU86_REV & 0x7f); - return 0; -} - -/* ------------------------------------------------------------------------- */ - -/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx - * - * This routine performs standard 8260 initialization sequence - * and calculates the available memory size. It may be called - * several times to try different SDRAM configurations on both - * 60x and local buses. - */ -static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, - ulong orx, volatile uchar * base) -{ - volatile uchar c = 0xff; - volatile uint *sdmr_ptr; - volatile uint *orx_ptr; - ulong maxsize, size; - int i; - - /* We must be able to test a location outsize the maximum legal size - * to find out THAT we are outside; but this address still has to be - * mapped by the controller. That means, that the initial mapping has - * to be (at least) twice as large as the maximum expected size. - */ - maxsize = (1 + (~orx | 0x7fff)) / 2; - - /* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that - * we are configuring CS1 if base != 0 - */ - sdmr_ptr = &memctl->memc_psdmr; - orx_ptr = &memctl->memc_or2; - - *orx_ptr = orx; - - /* - * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): - * - * "At system reset, initialization software must set up the - * programmable parameters in the memory controller banks registers - * (ORx, BRx, P/LSDMR). After all memory parameters are configured, - * system software should execute the following initialization sequence - * for each SDRAM device. - * - * 1. Issue a PRECHARGE-ALL-BANKS command - * 2. Issue eight CBR REFRESH commands - * 3. Issue a MODE-SET command to initialize the mode register - * - * The initial commands are executed by setting P/LSDMR[OP] and - * accessing the SDRAM with a single-byte transaction." - * - * The appropriate BRx/ORx registers have already been set when we - * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. - */ - - *sdmr_ptr = sdmr | PSDMR_OP_PREA; - *base = c; - - *sdmr_ptr = sdmr | PSDMR_OP_CBRR; - for (i = 0; i < 8; i++) - *base = c; - - *sdmr_ptr = sdmr | PSDMR_OP_MRW; - *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */ - - *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; - *base = c; - - size = get_ram_size((long *)base, maxsize); - - *orx_ptr = orx | ~(size - 1); - - return (size); -} - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; - -#ifndef CONFIG_SYS_RAMBOOT - ulong size8, size9, size10; -#endif - long psize; - - psize = 32 * 1024 * 1024; - - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - memctl->memc_psrt = CONFIG_SYS_PSRT; - -#ifndef CONFIG_SYS_RAMBOOT - /* 60x SDRAM setup: - */ - size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL, - (uchar *) CONFIG_SYS_SDRAM_BASE); - - size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL, - (uchar *) CONFIG_SYS_SDRAM_BASE); - - size10 = try_init (memctl, CONFIG_SYS_PSDMR_10COL, CONFIG_SYS_OR2_10COL, - (uchar *) CONFIG_SYS_SDRAM_BASE); - - psize = max(size8,max(size9,size10)); - - if (psize == size8) { - psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL, - (uchar *) CONFIG_SYS_SDRAM_BASE); - printf ("(60x:8COL) "); - } else if (psize == size9){ - psize = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL, - (uchar *) CONFIG_SYS_SDRAM_BASE); - printf ("(60x:9COL) "); - } else - printf ("(60x:10COL) "); - -#endif /* CONFIG_SYS_RAMBOOT */ - - icache_enable (); - - return (psize); -} - -#if defined(CONFIG_CMD_DOC) -void doc_init (void) -{ - doc_probe (CONFIG_SYS_DOC_BASE); -} -#endif - -#ifdef CONFIG_PCI -struct pci_controller hose; - -extern void pci_mpc8250_init(struct pci_controller *); - -void pci_init_board(void) -{ - pci_mpc8250_init(&hose); -} -#endif - -int board_eth_init(bd_t *bis) -{ - return pci_eth_init(bis); -} diff --git a/board/cpu87/cpu87.h b/board/cpu87/cpu87.h deleted file mode 100644 index 45cb853a26..0000000000 --- a/board/cpu87/cpu87.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __BOARD_CPU87__ -#define __BOARD_CPU87__ - -#include - -#define REG8(x) (*(volatile unsigned char *)(x)) - -/* CPU86 register definitions */ -#define CPU86_VME_EAC REG8(CONFIG_SYS_BCRS_BASE + 0x00) -#define CPU86_VME_SAC REG8(CONFIG_SYS_BCRS_BASE + 0x01) -#define CPU86_VME_MAC REG8(CONFIG_SYS_BCRS_BASE + 0x02) -#define CPU86_BCR REG8(CONFIG_SYS_BCRS_BASE + 0x03) -#define CPU86_BSR REG8(CONFIG_SYS_BCRS_BASE + 0x04) -#define CPU86_WDOG_RPORT REG8(CONFIG_SYS_BCRS_BASE + 0x05) -#define CPU86_MBOX_IRQ REG8(CONFIG_SYS_BCRS_BASE + 0x04) -#define CPU86_REV REG8(CONFIG_SYS_BCRS_BASE + 0x07) -#define CPU86_VME_IRQMASK REG8(CONFIG_SYS_BCRS_BASE + 0x80) -#define CPU86_VME_IRQSTATUS REG8(CONFIG_SYS_BCRS_BASE + 0x81) -#define CPU86_LOCAL_IRQMASK REG8(CONFIG_SYS_BCRS_BASE + 0x82) -#define CPU86_LOCAL_IRQSTATUS REG8(CONFIG_SYS_BCRS_BASE + 0x83) -#define CPU86_PMCL_IRQSTATUS REG8(CONFIG_SYS_BCRS_BASE + 0x84) - -/* Board Control Register bits */ -#define CPU86_BCR_FWPT 0x01 -#define CPU86_BCR_FWRE 0x02 - -#endif /* __BOARD_CPU87__ */ diff --git a/board/cpu87/flash.c b/board/cpu87/flash.c deleted file mode 100644 index 96ba7d9b33..0000000000 --- a/board/cpu87/flash.c +++ /dev/null @@ -1,608 +0,0 @@ -/* - * (C) Copyright 2001-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Flash Routines for Intel devices - * - *-------------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include "cpu87.h" - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -/*----------------------------------------------------------------------- - */ -ulong flash_int_get_size (volatile unsigned long *baseaddr, - flash_info_t * info) -{ - short i; - unsigned long flashtest_h, flashtest_l; - - info->sector_count = info->size = 0; - info->flash_id = FLASH_UNKNOWN; - - /* Write identify command sequence and test FLASH answer - */ - baseaddr[0] = 0x00900090; - baseaddr[1] = 0x00900090; - - flashtest_h = baseaddr[0]; /* manufacturer ID */ - flashtest_l = baseaddr[1]; - - if (flashtest_h != INTEL_MANUFACT || flashtest_l != INTEL_MANUFACT) - return (0); /* no or unknown flash */ - - flashtest_h = baseaddr[2]; /* device ID */ - flashtest_l = baseaddr[3]; - - if (flashtest_h != flashtest_l) - return (0); - - switch (flashtest_h) { - case INTEL_ID_28F160C3B: - info->flash_id = FLASH_28F160C3B; - info->sector_count = 39; - info->size = 0x00800000; /* 4 * 2 MB = 8 MB */ - break; - case INTEL_ID_28F160F3B: - info->flash_id = FLASH_28F160F3B; - info->sector_count = 39; - info->size = 0x00800000; /* 4 * 2 MB = 8 MB */ - break; - case INTEL_ID_28F640C3B: - info->flash_id = FLASH_28F640C3B; - info->sector_count = 135; - info->size = 0x02000000; /* 16 * 2 MB = 32 MB */ - break; - default: - return (0); /* no or unknown flash */ - } - - info->flash_id |= INTEL_MANUFACT << 16; /* set manufacturer offset */ - - if (info->flash_id & FLASH_BTYPE) { - volatile unsigned long *tmp = baseaddr; - - /* set up sector start adress table (bottom sector type) - * AND unlock the sectors (if our chip is 160C3) - */ - for (i = 0; i < info->sector_count; i++) { - if (((info->flash_id & FLASH_TYPEMASK) == FLASH_28F160C3B) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_28F640C3B)) { - tmp[0] = 0x00600060; - tmp[1] = 0x00600060; - tmp[0] = 0x00D000D0; - tmp[1] = 0x00D000D0; - } - info->start[i] = (uint) tmp; - tmp += i < 8 ? 0x2000 : 0x10000; /* pointer arith */ - } - } - - memset (info->protect, 0, info->sector_count); - - baseaddr[0] = 0x00FF00FF; - baseaddr[1] = 0x00FF00FF; - - return (info->size); -} - -static ulong flash_amd_get_size (vu_char *addr, flash_info_t *info) -{ - short i; - uchar vendor, devid; - ulong base = (ulong)addr; - - /* Write auto select command: read Manufacturer ID */ - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - addr[0x0555] = 0x90; - - udelay(1000); - - vendor = addr[0]; - devid = addr[1] & 0xff; - - /* only support AMD */ - if (vendor != 0x01) { - return 0; - } - - vendor &= 0xf; - devid &= 0xff; - - if (devid == AMD_ID_F040B) { - info->flash_id = vendor << 16 | devid; - info->sector_count = 8; - info->size = info->sector_count * 0x10000; - } - else if (devid == AMD_ID_F080B) { - info->flash_id = vendor << 16 | devid; - info->sector_count = 16; - info->size = 4 * info->sector_count * 0x10000; - } - else if (devid == AMD_ID_F016D) { - info->flash_id = vendor << 16 | devid; - info->sector_count = 32; - info->size = 4 * info->sector_count * 0x10000; - } - else { - printf ("## Unknown Flash Type: %02x\n", devid); - return 0; - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* sector base address */ - info->start[i] = base + i * (info->size / info->sector_count); - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned char *)(info->start[i]); - info->protect[i] = addr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (vu_char *)info->start[0]; - addr[0] = 0xF0; /* reset bank */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ -unsigned long flash_init (void) -{ - unsigned long size_b0 = 0; - unsigned long size_b1 = 0; - int i; - - /* Init: no FLASHes known - */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Disable flash protection */ - CPU86_BCR |= (CPU86_BCR_FWPT | CPU86_BCR_FWRE); - - /* Static FLASH Bank configuration here (only one bank) */ - - size_b0 = flash_int_get_size ((ulong *) CONFIG_SYS_FLASH_BASE, &flash_info[0]); - size_b1 = flash_amd_get_size ((uchar *) CONFIG_SYS_BOOTROM_BASE, &flash_info[1]); - - if (size_b0 > 0 || size_b1 > 0) { - - printf("("); - - if (size_b0 > 0) { - puts ("Bank#1 - "); - print_size (size_b0, (size_b1 > 0) ? ", " : ") "); - } - - if (size_b1 > 0) { - puts ("Bank#2 - "); - print_size (size_b1, ") "); - } - } - else { - printf ("## No FLASH found.\n"); - return 0; - } - /* protect monitor and environment sectors - */ - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_BOOTROM_BASE - if (size_b1) { - /* If U-Boot is booted from ROM the CONFIG_SYS_MONITOR_BASE > CONFIG_SYS_FLASH_BASE - * but we shouldn't protect it. - */ - - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[1] - ); - } -#else -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0] - ); -#endif -#endif - -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif -# if CONFIG_ENV_ADDR >= CONFIG_SYS_BOOTROM_BASE - if (size_b1) { - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[1]); - } -# else - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); -# endif -#endif - - return (size_b0 + size_b1); -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch ((info->flash_id >> 16) & 0xff) { - case 0x89: - printf ("INTEL "); - break; - case 0x1: - printf ("AMD "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F160C3B: - printf ("28F160C3B (16 Mbit, bottom sector)\n"); - break; - case FLASH_28F160F3B: - printf ("28F160F3B (16 Mbit, bottom sector)\n"); - break; - case FLASH_28F640C3B: - printf ("28F640C3B (64 M, bottom sector)\n"); - break; - case AMD_ID_F040B: - printf ("AM29F040B (4 Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - if (info->size < 0x100000) - printf (" Size: %ld KB in %d Sectors\n", - info->size >> 10, info->sector_count); - else - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - vu_char *addr = (vu_char *)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect]) - prot++; - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Check the type of erased flash - */ - if (info->flash_id >> 16 == 0x1) { - /* Erase AMD flash - */ - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - addr[0x0555] = 0x80; - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_char *)(info->start[sect]); - addr[0] = 0x30; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto AMD_DONE; - - start = get_timer (0); - last = start; - addr = (vu_char *)(info->start[l_sect]); - while ((addr[0] & 0x80) != 0x80) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - serial_putc ('.'); - last = now; - } - } - -AMD_DONE: - /* reset to read mode */ - addr = (volatile unsigned char *)info->start[0]; - addr[0] = 0xF0; /* reset bank */ - - } else { - /* Erase Intel flash - */ - - /* Start erase on unprotected sectors - */ - for (sect = s_first; sect <= s_last; sect++) { - volatile ulong *addr = - (volatile unsigned long *) info->start[sect]; - - start = get_timer (0); - last = start; - if (info->protect[sect] == 0) { - /* Disable interrupts which might cause a timeout here - */ - flag = disable_interrupts (); - - /* Erase the block - */ - addr[0] = 0x00200020; - addr[1] = 0x00200020; - addr[0] = 0x00D000D0; - addr[1] = 0x00D000D0; - - /* re-enable interrupts if necessary - */ - if (flag) - enable_interrupts (); - - /* wait at least 80us - let's wait 1 ms - */ - udelay (1000); - - last = start; - while ((addr[0] & 0x00800080) != 0x00800080 || - (addr[1] & 0x00800080) != 0x00800080) { - if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout (erase suspended!)\n"); - /* Suspend erase - */ - addr[0] = 0x00B000B0; - addr[1] = 0x00B000B0; - goto DONE; - } - /* show that we're waiting - */ - if ((now - last) > 1000) { /* every second */ - serial_putc ('.'); - last = now; - } - } - if (addr[0] & 0x00220022 || addr[1] & 0x00220022) { - printf ("*** ERROR: erase failed!\n"); - goto DONE; - } - } - /* Clear status register and reset to read mode - */ - addr[0] = 0x00500050; - addr[1] = 0x00500050; - addr[0] = 0x00FF00FF; - addr[1] = 0x00FF00FF; - } - } - - printf (" done\n"); - -DONE: - return 0; -} - -static int write_word (flash_info_t *, volatile unsigned long *, ulong); -static int write_byte (flash_info_t *info, ulong dest, uchar data); - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong v; - int i, l, rc, cc = cnt, res = 0; - - if (info->flash_id >> 16 == 0x1) { - - /* Write to AMD 8-bit flash - */ - while (cnt > 0) { - if ((rc = write_byte(info, addr, *src)) != 0) { - return (rc); - } - addr++; - src++; - cnt--; - } - - return (0); - } else { - - /* Write to Intel 64-bit flash - */ - for (v=0; cc > 0; addr += 4, cc -= 4 - l) { - l = (addr & 3); - addr &= ~3; - - for (i = 0; i < 4; i++) { - v = (v << 8) + (i < l || i - l >= cc ? - *((unsigned char *) addr + i) : *src++); - } - - if ((res = write_word (info, (volatile unsigned long *) addr, v)) != 0) - break; - } - } - - return (res); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t * info, volatile unsigned long *addr, - ulong data) -{ - int flag, res = 0; - ulong start; - - /* Check if Flash is (sufficiently) erased - */ - if ((*addr & data) != data) - return (2); - - /* Disable interrupts which might cause a timeout here - */ - flag = disable_interrupts (); - - *addr = 0x00400040; - *addr = data; - - /* re-enable interrupts if necessary - */ - if (flag) - enable_interrupts (); - - start = get_timer (0); - while ((*addr & 0x00800080) != 0x00800080) { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - /* Suspend program - */ - *addr = 0x00B000B0; - res = 1; - goto OUT; - } - } - - if (*addr & 0x00220022) { - printf ("*** ERROR: program failed!\n"); - res = 1; - } - -OUT: - /* Clear status register and reset to read mode - */ - *addr = 0x00500050; - *addr = 0x00FF00FF; - - return (res); -} - -/*----------------------------------------------------------------------- - * Write a byte to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_byte (flash_info_t *info, ulong dest, uchar data) -{ - vu_char *addr = (vu_char *)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_char *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - addr[0x0555] = 0xA0; - - *((vu_char *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/configs/CPU86_ROMBOOT_defconfig b/configs/CPU86_ROMBOOT_defconfig deleted file mode 100644 index 41aa7df582..0000000000 --- a/configs/CPU86_ROMBOOT_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="BOOT_ROM" -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_CPU86=y diff --git a/configs/CPU86_defconfig b/configs/CPU86_defconfig deleted file mode 100644 index f0a4049647..0000000000 --- a/configs/CPU86_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_CPU86=y diff --git a/configs/CPU87_ROMBOOT_defconfig b/configs/CPU87_ROMBOOT_defconfig deleted file mode 100644 index ba13b40d27..0000000000 --- a/configs/CPU87_ROMBOOT_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="BOOT_ROM" -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_CPU87=y diff --git a/configs/CPU87_defconfig b/configs/CPU87_defconfig deleted file mode 100644 index 86a5737f47..0000000000 --- a/configs/CPU87_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_CPU87=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 400eea1194..c0d0cd90c5 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,8 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +CPU86 powerpc mpc8260 - - Wolfgang Denk +CPU87 powerpc mpc8260 - - ep82xxm powerpc mpc8260 - - gw8260 powerpc mpc8260 - - Oliver Brown IPHASE4539 powerpc mpc8260 - - Wolfgang Grandegger diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h deleted file mode 100644 index 7be83b0787..0000000000 --- a/include/configs/CPU86.h +++ /dev/null @@ -1,629 +0,0 @@ -/* - * (C) Copyright 2001-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_CPU86 1 /* ...on a CPU86 board */ -#define CONFIG_CPM2 1 /* Has a CPM2 */ - -#ifdef CONFIG_BOOT_ROM -#define CONFIG_SYS_TEXT_BASE 0xFF800000 -#else -#define CONFIG_SYS_TEXT_BASE 0xFF000000 -#endif - -/* - * select serial console configuration - * - * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - * - * if CONFIG_CONS_NONE is defined, then the serial console routines must - * defined elsewhere (for example, on the cogent platform, there are serial - * ports on the motherboard which are used for the serial console - see - * cogent/cma101/serial.[ch]). - */ -#undef CONFIG_CONS_ON_SMC /* define if console on SMC */ -#define CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else*/ -#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ - -#if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC) -#define CONFIG_BAUDRATE 230400 -#else -#define CONFIG_BAUDRATE 9600 -#endif - -/* - * select ethernet configuration - * - * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then - * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 - * for FCC) - * - * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. - */ -#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ -#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ -#undef CONFIG_ETHER_NONE /* define if ether on something else */ -#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */ - -#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1) - -/* - * - Rx-CLK is CLK11 - * - Tx-CLK is CLK12 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - -#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2) - -/* - * - Rx-CLK is CLK13 - * - Tx-CLK is CLK14 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - -#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */ - -/* system clock rate (CLKIN) - equal to the 60x and local bus speed */ -#define CONFIG_8260_CLKIN 64000000 /* in Hz */ - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_PREBOOT \ - "echo; " \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS; " \ - "echo" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -/*----------------------------------------------------------------------- - * I2C/EEPROM/RTC configuration - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE - -/* - * Software (bit-bang) I2C driver configuration - */ -#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00010000) -#define I2C_TRISTATE (iop->pdir &= ~0x00010000) -#define I2C_READ ((iop->pdat & 0x00010000) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \ - else iop->pdat &= ~0x00010000 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \ - else iop->pdat &= ~0x00020000 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -#define CONFIG_RTC_PCF8563 -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/*----------------------------------------------------------------------- - * Miscellaneous configuration options - */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_BEDBUG -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * Flash configuration - */ - -#define CONFIG_SYS_BOOTROM_BASE 0xFF800000 -#define CONFIG_SYS_BOOTROM_SIZE 0x00080000 -#define CONFIG_SYS_FLASH_BASE 0xFF000000 -#define CONFIG_SYS_FLASH_SIZE 0x00800000 - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -/*----------------------------------------------------------------------- - * Other areas to be mapped - */ - -/* CS3: Dual ported SRAM */ -#define CONFIG_SYS_DPSRAM_BASE 0x40000000 -#define CONFIG_SYS_DPSRAM_SIZE 0x00020000 - -/* CS4: DiskOnChip */ -#define CONFIG_SYS_DOC_BASE 0xF4000000 -#define CONFIG_SYS_DOC_SIZE 0x00100000 - -/* CS5: FDC37C78 controller */ -#define CONFIG_SYS_FDC37C78_BASE 0xF1000000 -#define CONFIG_SYS_FDC37C78_SIZE 0x00100000 - -/* CS6: Board configuration registers */ -#define CONFIG_SYS_BCRS_BASE 0xF2000000 -#define CONFIG_SYS_BCRS_SIZE 0x00010000 - -/* CS7: VME Extended Access Range */ -#define CONFIG_SYS_VMEEAR_BASE 0x80000000 -#define CONFIG_SYS_VMEEAR_SIZE 0x01000000 - -/* CS8: VME Standard Access Range */ -#define CONFIG_SYS_VMESAR_BASE 0xFE000000 -#define CONFIG_SYS_VMESAR_SIZE 0x01000000 - -/* CS9: VME Short I/O Access Range */ -#define CONFIG_SYS_VMESIOAR_BASE 0xFD000000 -#define CONFIG_SYS_VMESIOAR_SIZE 0x01000000 - -/*----------------------------------------------------------------------- - * Hard Reset Configuration Words - * - * if you change bits in the HRCW, you must also change the CONFIG_SYS_* - * defines for the various registers affected by the HRCW e.g. changing - * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR. - */ -#if defined(CONFIG_BOOT_ROM) -#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB100 | HRCW_BMS | \ - HRCW_BPS01 | HRCW_CS10PC01) -#else -#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB100 | HRCW_BMS | HRCW_CS10PC01) -#endif - -/* no slaves so just fill with zeros */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xF0000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - * - * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE. - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT -#endif - -#if 0 -/* environment is in Flash */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#ifdef CONFIG_BOOT_ROM -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x70000) -# define CONFIG_ENV_SIZE 0x10000 -# define CONFIG_ENV_SECT_SIZE 0x10000 -#endif -#else -/* environment is in EEPROM */ -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58 /* EEPROM X24C16 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ -#define CONFIG_ENV_OFFSET 512 -#define CONFIG_ENV_SIZE (2048 - 512) -#endif - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * HIDx - Hardware Implementation-dependent Registers 2-11 - *----------------------------------------------------------------------- - * HID0 also contains cache control - initially enable both caches and - * invalidate contents, then the final state leaves only the instruction - * cache enabled. Note that Power-On and Hard reset invalidate the caches, - * but Soft reset does not. - * - * HID1 has only read-only information - nothing to set. - */ -#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|\ - HID0_DCI|HID0_IFEM|HID0_ABE) -#define CONFIG_SYS_HID0_FINAL (HID0_IFEM|HID0_ABE) -#define CONFIG_SYS_HID2 0 - -/*----------------------------------------------------------------------- - * RMR - Reset Mode Register 5-5 - *----------------------------------------------------------------------- - * turn on Checkstop Reset Enable - */ -#define CONFIG_SYS_RMR RMR_CSRE - -/*----------------------------------------------------------------------- - * BCR - Bus Configuration 4-25 - *----------------------------------------------------------------------- - */ -#define BCR_APD01 0x10000000 -#define CONFIG_SYS_BCR (BCR_APD01|BCR_ETM|BCR_LETM) /* 8260 mode */ - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 4-31 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_BBD|SIUMCR_DPPC00|SIUMCR_APPC10|\ - SIUMCR_CS10PC01|SIUMCR_BCTLC10) - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 4-35 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP) -#endif /* CONFIG_WATCHDOG */ - -/*----------------------------------------------------------------------- - * TMCNTSC - Time Counter Status and Control 4-40 - *----------------------------------------------------------------------- - * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, - * and enable Time Counter - */ -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 4-42 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable - * Periodic timer - */ -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) - -/*----------------------------------------------------------------------- - * SCCR - System Clock Control 9-8 - *----------------------------------------------------------------------- - * Ensure DFBRG is Divide by 16 - */ -#define CONFIG_SYS_SCCR SCCR_DFBRG01 - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration 13-7 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RCCR 0 - -#define CONFIG_SYS_MIN_AM_MASK 0xC0000000 -/*----------------------------------------------------------------------- - * MPTPR - Memory Refresh Timer Prescaler Register 10-18 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_MPTPR 0x1F00 - -/*----------------------------------------------------------------------- - * PSRT - Refresh Timer Register 10-16 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_PSRT 0x0f - -/*----------------------------------------------------------------------- - * PSRT - SDRAM Mode Register 10-10 - *----------------------------------------------------------------------- - */ - - /* SDRAM initialization values for 8-column chips - */ -#define CONFIG_SYS_OR2_8COL (CONFIG_SYS_MIN_AM_MASK |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI0_A9 |\ - ORxS_NUMR_12) - -#define CONFIG_SYS_PSDMR_8COL (PSDMR_SDAM_A13_IS_A5 |\ - PSDMR_BSMA_A14_A16 |\ - PSDMR_SDA10_PBI0_A10 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_1W |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_1C |\ - PSDMR_CL_2) - - /* SDRAM initialization values for 9-column chips - */ -#define CONFIG_SYS_OR2_9COL (CONFIG_SYS_MIN_AM_MASK |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI0_A7 |\ - ORxS_NUMR_13) - -#define CONFIG_SYS_PSDMR_9COL (PSDMR_SDAM_A14_IS_A5 |\ - PSDMR_BSMA_A13_A15 |\ - PSDMR_SDA10_PBI0_A9 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_1W |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_1C |\ - PSDMR_CL_2) - -/* - * Init Memory Controller: - * - * Bank Bus Machine PortSz Device - * ---- --- ------- ------ ------ - * 0 60x GPCM 8 bit Boot ROM - * 1 60x GPCM 64 bit FLASH - * 2 60x SDRAM 64 bit SDRAM - * - */ - -#define CONFIG_SYS_MRS_OFFS 0x00000000 - -#ifdef CONFIG_BOOT_ROM -/* Bank 0 - Boot ROM - */ -#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_BOOTROM_BASE & BRx_BA_MSK)|\ - BRx_PS_8 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR0_PRELIM (P2SZ_TO_AM(CONFIG_SYS_BOOTROM_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_3_CLK |\ - ORxU_EHTR_8IDLE) - -/* Bank 1 - FLASH - */ -#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\ - BRx_PS_64 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(CONFIG_SYS_FLASH_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_3_CLK |\ - ORxU_EHTR_8IDLE) - -#else /* CONFIG_BOOT_ROM */ -/* Bank 0 - FLASH - */ -#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\ - BRx_PS_64 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR0_PRELIM (P2SZ_TO_AM(CONFIG_SYS_FLASH_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_3_CLK |\ - ORxU_EHTR_8IDLE) - -/* Bank 1 - Boot ROM - */ -#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_BOOTROM_BASE & BRx_BA_MSK)|\ - BRx_PS_8 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(CONFIG_SYS_BOOTROM_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_3_CLK |\ - ORxU_EHTR_8IDLE) - -#endif /* CONFIG_BOOT_ROM */ - - -/* Bank 2 - 60x bus SDRAM - */ -#ifndef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\ - BRx_PS_64 |\ - BRx_MS_SDRAM_P |\ - BRx_V) - -#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_OR2_9COL - -#define CONFIG_SYS_PSDMR CONFIG_SYS_PSDMR_9COL -#endif /* CONFIG_SYS_RAMBOOT */ - -/* Bank 3 - Dual Ported SRAM - */ -#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_DPSRAM_BASE & BRx_BA_MSK) |\ - BRx_PS_16 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(CONFIG_SYS_DPSRAM_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_5_CLK |\ - ORxG_SETA) - -/* Bank 4 - DiskOnChip - */ -#define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_DOC_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR4_PRELIM (P2SZ_TO_AM(CONFIG_SYS_DOC_SIZE) |\ - ORxG_ACS_DIV2 |\ - ORxG_SCY_5_CLK |\ - ORxU_EHTR_8IDLE) - -/* Bank 5 - FDC37C78 controller - */ -#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_FDC37C78_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR5_PRELIM (P2SZ_TO_AM(CONFIG_SYS_FDC37C78_SIZE) |\ - ORxG_ACS_DIV2 |\ - ORxG_SCY_8_CLK |\ - ORxU_EHTR_8IDLE) - -/* Bank 6 - Board control registers - */ -#define CONFIG_SYS_BR6_PRELIM ((CONFIG_SYS_BCRS_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR6_PRELIM (P2SZ_TO_AM(CONFIG_SYS_BCRS_SIZE) |\ - ORxG_CSNT |\ - ORxG_SCY_5_CLK) - -/* Bank 7 - VME Extended Access Range - */ -#define CONFIG_SYS_BR7_PRELIM ((CONFIG_SYS_VMEEAR_BASE & BRx_BA_MSK) |\ - BRx_PS_32 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR7_PRELIM (P2SZ_TO_AM(CONFIG_SYS_VMEEAR_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_5_CLK |\ - ORxG_SETA) - -/* Bank 8 - VME Standard Access Range - */ -#define CONFIG_SYS_BR8_PRELIM ((CONFIG_SYS_VMESAR_BASE & BRx_BA_MSK) |\ - BRx_PS_16 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR8_PRELIM (P2SZ_TO_AM(CONFIG_SYS_VMESAR_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_5_CLK |\ - ORxG_SETA) - -/* Bank 9 - VME Short I/O Access Range - */ -#define CONFIG_SYS_BR9_PRELIM ((CONFIG_SYS_VMESIOAR_BASE & BRx_BA_MSK) |\ - BRx_PS_16 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR9_PRELIM (P2SZ_TO_AM(CONFIG_SYS_VMESIOAR_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_5_CLK |\ - ORxG_SETA) - -#endif /* __CONFIG_H */ diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h deleted file mode 100644 index d3a59e8ba7..0000000000 --- a/include/configs/CPU87.h +++ /dev/null @@ -1,676 +0,0 @@ -/* - * (C) Copyright 2001-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_CPU87 1 /* ...on a CPU87 board */ -#define CONFIG_PCI -#define CONFIG_CPM2 1 /* Has a CPM2 */ - -#ifdef CONFIG_BOOT_ROM -#define CONFIG_SYS_TEXT_BASE 0xFF800000 -#else -#define CONFIG_SYS_TEXT_BASE 0xFF000000 -#endif - -/* - * select serial console configuration - * - * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - * - * if CONFIG_CONS_NONE is defined, then the serial console routines must - * defined elsewhere (for example, on the cogent platform, there are serial - * ports on the motherboard which are used for the serial console - see - * cogent/cma101/serial.[ch]). - */ -#undef CONFIG_CONS_ON_SMC /* define if console on SMC */ -#define CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else*/ -#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ - -#if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC) -#define CONFIG_BAUDRATE 230400 -#else -#define CONFIG_BAUDRATE 9600 -#endif - -/* - * select ethernet configuration - * - * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then - * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 - * for FCC) - * - * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. - */ -#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ -#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ -#undef CONFIG_ETHER_NONE /* define if ether on something else */ -#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */ - -#define CONFIG_HAS_ETH1 1 -#define CONFIG_HAS_ETH2 1 - -#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1) - -/* - * - Rx-CLK is CLK11 - * - Tx-CLK is CLK12 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - -#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2) - -/* - * - Rx-CLK is CLK13 - * - Tx-CLK is CLK14 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - -#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */ - -/* system clock rate (CLKIN) - equal to the 60x and local bus speed */ -#define CONFIG_8260_CLKIN 100000000 /* in Hz */ - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_PREBOOT \ - "echo; " \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS; " \ - "echo" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -/*----------------------------------------------------------------------- - * I2C/EEPROM/RTC configuration - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE - -/* - * Software (bit-bang) I2C driver configuration - */ -#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00010000) -#define I2C_TRISTATE (iop->pdir &= ~0x00010000) -#define I2C_READ ((iop->pdat & 0x00010000) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \ - else iop->pdat &= ~0x00010000 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \ - else iop->pdat &= ~0x00020000 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -#define CONFIG_RTC_PCF8563 -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/*----------------------------------------------------------------------- - * Disk-On-Chip configuration - */ - -#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ - -#define CONFIG_SYS_DOC_SUPPORT_2000 -#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM - -/*----------------------------------------------------------------------- - * Miscellaneous configuration options - */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_BEDBUG -#define CONFIG_CMD_DATE -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C - -#ifdef CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE - #define CONFIG_CMD_PCI -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */ - -#define CONFIG_LOOPW - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * Flash configuration - */ - -#define CONFIG_SYS_BOOTROM_BASE 0xFF800000 -#define CONFIG_SYS_BOOTROM_SIZE 0x00080000 -#define CONFIG_SYS_FLASH_BASE 0xFF000000 -#define CONFIG_SYS_FLASH_SIZE 0x00800000 - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 135 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -/*----------------------------------------------------------------------- - * Other areas to be mapped - */ - -/* CS3: Dual ported SRAM */ -#define CONFIG_SYS_DPSRAM_BASE 0x40000000 -#define CONFIG_SYS_DPSRAM_SIZE 0x00100000 - -/* CS4: DiskOnChip */ -#define CONFIG_SYS_DOC_BASE 0xF4000000 -#define CONFIG_SYS_DOC_SIZE 0x00100000 - -/* CS5: FDC37C78 controller */ -#define CONFIG_SYS_FDC37C78_BASE 0xF1000000 -#define CONFIG_SYS_FDC37C78_SIZE 0x00100000 - -/* CS6: Board configuration registers */ -#define CONFIG_SYS_BCRS_BASE 0xF2000000 -#define CONFIG_SYS_BCRS_SIZE 0x00010000 - -/* CS7: VME Extended Access Range */ -#define CONFIG_SYS_VMEEAR_BASE 0x60000000 -#define CONFIG_SYS_VMEEAR_SIZE 0x01000000 - -/* CS8: VME Standard Access Range */ -#define CONFIG_SYS_VMESAR_BASE 0xFE000000 -#define CONFIG_SYS_VMESAR_SIZE 0x01000000 - -/* CS9: VME Short I/O Access Range */ -#define CONFIG_SYS_VMESIOAR_BASE 0xFD000000 -#define CONFIG_SYS_VMESIOAR_SIZE 0x01000000 - -/*----------------------------------------------------------------------- - * Hard Reset Configuration Words - * - * if you change bits in the HRCW, you must also change the CONFIG_SYS_* - * defines for the various registers affected by the HRCW e.g. changing - * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR. - */ -#if defined(CONFIG_BOOT_ROM) -#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB100 | HRCW_BMS | \ - HRCW_BPS01 | HRCW_CS10PC01) -#else -#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB100 | HRCW_BMS | HRCW_CS10PC01) -#endif - -/* no slaves so just fill with zeros */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xF0000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - * - * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE. - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT -#endif - -#ifdef CONFIG_PCI -#define CONFIG_PCI_PNP -#define CONFIG_EEPRO100 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#endif - -#if 0 -/* environment is in Flash */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#ifdef CONFIG_BOOT_ROM -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x70000) -# define CONFIG_ENV_SIZE 0x10000 -# define CONFIG_ENV_SECT_SIZE 0x10000 -#endif -#else -/* environment is in EEPROM */ -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58 /* EEPROM X24C16 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ -#define CONFIG_ENV_OFFSET 512 -#define CONFIG_ENV_SIZE (2048 - 512) -#endif - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * HIDx - Hardware Implementation-dependent Registers 2-11 - *----------------------------------------------------------------------- - * HID0 also contains cache control - initially enable both caches and - * invalidate contents, then the final state leaves only the instruction - * cache enabled. Note that Power-On and Hard reset invalidate the caches, - * but Soft reset does not. - * - * HID1 has only read-only information - nothing to set. - */ -#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|\ - HID0_DCI|HID0_IFEM|HID0_ABE) -#define CONFIG_SYS_HID0_FINAL (HID0_IFEM|HID0_ABE) -#define CONFIG_SYS_HID2 0 - -/*----------------------------------------------------------------------- - * RMR - Reset Mode Register 5-5 - *----------------------------------------------------------------------- - * turn on Checkstop Reset Enable - */ -#define CONFIG_SYS_RMR RMR_CSRE - -/*----------------------------------------------------------------------- - * BCR - Bus Configuration 4-25 - *----------------------------------------------------------------------- - */ -#define BCR_APD01 0x10000000 -#define CONFIG_SYS_BCR (BCR_APD01|BCR_ETM|BCR_LETM) /* 8260 mode */ - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 4-31 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_BBD|SIUMCR_DPPC00|SIUMCR_APPC10|\ - SIUMCR_CS10PC01|SIUMCR_BCTLC10) - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 4-35 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP) -#endif /* CONFIG_WATCHDOG */ - -/*----------------------------------------------------------------------- - * TMCNTSC - Time Counter Status and Control 4-40 - *----------------------------------------------------------------------- - * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, - * and enable Time Counter - */ -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 4-42 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable - * Periodic timer - */ -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) - -/*----------------------------------------------------------------------- - * SCCR - System Clock Control 9-8 - *----------------------------------------------------------------------- - * Ensure DFBRG is Divide by 16 - */ -#define CONFIG_SYS_SCCR SCCR_DFBRG01 - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration 13-7 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RCCR 0 - -#define CONFIG_SYS_MIN_AM_MASK 0xC0000000 - -/* - * we use the same values for 32 MB, 128 MB and 256 MB SDRAM - * refresh rate = 7.68 uS (100 MHz Bus Clock) - */ - -/*----------------------------------------------------------------------- - * MPTPR - Memory Refresh Timer Prescaler Register 10-18 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_MPTPR 0x2000 - -/*----------------------------------------------------------------------- - * PSRT - Refresh Timer Register 10-16 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_PSRT 0x16 - -/*----------------------------------------------------------------------- - * PSRT - SDRAM Mode Register 10-10 - *----------------------------------------------------------------------- - */ - - /* SDRAM initialization values for 8-column chips - */ -#define CONFIG_SYS_OR2_8COL (CONFIG_SYS_MIN_AM_MASK |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI0_A9 |\ - ORxS_NUMR_12) - -#define CONFIG_SYS_PSDMR_8COL (PSDMR_SDAM_A13_IS_A5 |\ - PSDMR_BSMA_A14_A16 |\ - PSDMR_SDA10_PBI0_A10 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_1C |\ - PSDMR_CL_2) - - /* SDRAM initialization values for 9-column chips - */ -#define CONFIG_SYS_OR2_9COL (CONFIG_SYS_MIN_AM_MASK |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI0_A7 |\ - ORxS_NUMR_13) - -#define CONFIG_SYS_PSDMR_9COL (PSDMR_SDAM_A14_IS_A5 |\ - PSDMR_BSMA_A13_A15 |\ - PSDMR_SDA10_PBI0_A9 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_1C |\ - PSDMR_CL_2) - - /* SDRAM initialization values for 10-column chips - */ -#define CONFIG_SYS_OR2_10COL (CONFIG_SYS_MIN_AM_MASK |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI1_A4 |\ - ORxS_NUMR_13) - -#define CONFIG_SYS_PSDMR_10COL (PSDMR_PBI |\ - PSDMR_SDAM_A17_IS_A5 |\ - PSDMR_BSMA_A13_A15 |\ - PSDMR_SDA10_PBI1_A6 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_1C |\ - PSDMR_CL_2) - -/* - * Init Memory Controller: - * - * Bank Bus Machine PortSz Device - * ---- --- ------- ------ ------ - * 0 60x GPCM 8 bit Boot ROM - * 1 60x GPCM 64 bit FLASH - * 2 60x SDRAM 64 bit SDRAM - * - */ - -#define CONFIG_SYS_MRS_OFFS 0x00000000 - -#ifdef CONFIG_BOOT_ROM -/* Bank 0 - Boot ROM - */ -#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_BOOTROM_BASE & BRx_BA_MSK)|\ - BRx_PS_8 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR0_PRELIM (P2SZ_TO_AM(CONFIG_SYS_BOOTROM_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_5_CLK |\ - ORxU_EHTR_8IDLE) - -/* Bank 1 - FLASH - */ -#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\ - BRx_PS_64 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(CONFIG_SYS_FLASH_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_5_CLK |\ - ORxU_EHTR_8IDLE) - -#else /* CONFIG_BOOT_ROM */ -/* Bank 0 - FLASH - */ -#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\ - BRx_PS_64 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR0_PRELIM (P2SZ_TO_AM(CONFIG_SYS_FLASH_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_5_CLK |\ - ORxU_EHTR_8IDLE) - -/* Bank 1 - Boot ROM - */ -#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_BOOTROM_BASE & BRx_BA_MSK)|\ - BRx_PS_8 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(CONFIG_SYS_BOOTROM_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_5_CLK |\ - ORxU_EHTR_8IDLE) - -#endif /* CONFIG_BOOT_ROM */ - - -/* Bank 2 - 60x bus SDRAM - */ -#ifndef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\ - BRx_PS_64 |\ - BRx_MS_SDRAM_P |\ - BRx_V) - -#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_OR2_8COL - -#define CONFIG_SYS_PSDMR CONFIG_SYS_PSDMR_8COL -#endif /* CONFIG_SYS_RAMBOOT */ - -/* Bank 3 - Dual Ported SRAM - */ -#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_DPSRAM_BASE & BRx_BA_MSK) |\ - BRx_PS_16 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(CONFIG_SYS_DPSRAM_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_7_CLK |\ - ORxG_SETA) - -/* Bank 4 - DiskOnChip - */ -#define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_DOC_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR4_PRELIM (P2SZ_TO_AM(CONFIG_SYS_DOC_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV2 |\ - ORxG_SCY_9_CLK |\ - ORxU_EHTR_8IDLE) - -/* Bank 5 - FDC37C78 controller - */ -#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_FDC37C78_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR5_PRELIM (P2SZ_TO_AM(CONFIG_SYS_FDC37C78_SIZE) |\ - ORxG_ACS_DIV2 |\ - ORxG_SCY_10_CLK |\ - ORxU_EHTR_8IDLE) - -/* Bank 6 - Board control registers - */ -#define CONFIG_SYS_BR6_PRELIM ((CONFIG_SYS_BCRS_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR6_PRELIM (P2SZ_TO_AM(CONFIG_SYS_BCRS_SIZE) |\ - ORxG_CSNT |\ - ORxG_SCY_7_CLK) - -/* Bank 7 - VME Extended Access Range - */ -#define CONFIG_SYS_BR7_PRELIM ((CONFIG_SYS_VMEEAR_BASE & BRx_BA_MSK) |\ - BRx_PS_32 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR7_PRELIM (P2SZ_TO_AM(CONFIG_SYS_VMEEAR_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_7_CLK |\ - ORxG_SETA) - -/* Bank 8 - VME Standard Access Range - */ -#define CONFIG_SYS_BR8_PRELIM ((CONFIG_SYS_VMESAR_BASE & BRx_BA_MSK) |\ - BRx_PS_16 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR8_PRELIM (P2SZ_TO_AM(CONFIG_SYS_VMESAR_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_7_CLK |\ - ORxG_SETA) - -/* Bank 9 - VME Short I/O Access Range - */ -#define CONFIG_SYS_BR9_PRELIM ((CONFIG_SYS_VMESIOAR_BASE & BRx_BA_MSK) |\ - BRx_PS_16 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR9_PRELIM (P2SZ_TO_AM(CONFIG_SYS_VMESIOAR_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_7_CLK |\ - ORxG_SETA) - -#endif /* __CONFIG_H */