From: Marek Vasut Date: Sun, 26 Nov 2017 19:59:23 +0000 (+0100) Subject: ARM: rmobile: Enable Micrel KSZ90x1 PHY driver on ULCB X-Git-Tag: v2018.01-rc1~26^2~25 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=fade9f2f1680fd4ddc1c149785e9a6d7fc282350;p=u-boot ARM: rmobile: Enable Micrel KSZ90x1 PHY driver on ULCB Enable the Micrel KSZ90x1 driver on ULCB, since the board is populated with KSZ9031 and without this driver, the PHY cannot be operated. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu --- diff --git a/configs/r8a7795_ulcb_defconfig b/configs/r8a7795_ulcb_defconfig index 50d36891cc..94a9580a74 100644 --- a/configs/r8a7795_ulcb_defconfig +++ b/configs/r8a7795_ulcb_defconfig @@ -31,6 +31,8 @@ CONFIG_DM_GPIO=y CONFIG_RCAR_GPIO=y CONFIG_DM_MMC=y CONFIG_MMC_UNIPHIER=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y CONFIG_RENESAS_RAVB=y CONFIG_PINCTRL=y diff --git a/configs/r8a7796_ulcb_defconfig b/configs/r8a7796_ulcb_defconfig index c8edfabc91..e827d75ccc 100644 --- a/configs/r8a7796_ulcb_defconfig +++ b/configs/r8a7796_ulcb_defconfig @@ -32,6 +32,8 @@ CONFIG_DM_GPIO=y CONFIG_RCAR_GPIO=y CONFIG_DM_MMC=y CONFIG_MMC_UNIPHIER=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y CONFIG_RENESAS_RAVB=y CONFIG_PINCTRL=y diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h index b54e63c2a2..e9b64ae6e8 100644 --- a/include/configs/ulcb.h +++ b/include/configs/ulcb.h @@ -33,7 +33,6 @@ /* use to RPC(SPI Multi I/O Bus Controller) */ /* Ethernet RAVB */ -#define CONFIG_PHY_MICREL #define CONFIG_BITBANGMII #define CONFIG_BITBANGMII_MULTI