From: Gunnar Rangoy <gunnar@rangoy.com>
Date: Fri, 23 Jan 2009 11:56:31 +0000 (+0100)
Subject: AVR32: macb - Search for PHY id
X-Git-Tag: v2009.03-rc1~139^2
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=fc01ea1e27d5b124f0a1868d0ce569f156d58dfe;p=u-boot

AVR32: macb - Search for PHY id

This patch adds support for searching through available PHY-addresses in
the macb-driver. This is needed for the ATEVK1100 evaluation board,
where the PHY-address will be initialized to either 1 or 7.

This patch adds a config option, CONFIG_MACB_SEARCH_PHY, which when
enabled tells the driver to search for the PHY address.

Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
Signed-off-by: Olav Morken <olavmrk@gmail.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
---

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 98e8c73cab..af0409bd2c 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -317,6 +317,30 @@ static void macb_phy_reset(struct macb_device *macb)
 		       netdev->name, status);
 }
 
+#ifdef CONFIG_MACB_SEARCH_PHY
+static int macb_phy_find(struct macb_device *macb)
+{
+	int i;
+	u16 phy_id;
+
+	/* Search for PHY... */
+	for (i = 0; i < 32; i++) {
+		macb->phy_addr = i;
+		phy_id = macb_mdio_read(macb, MII_PHYSID1);
+		if (phy_id != 0xffff) {
+			printf("%s: PHY present at %d\n", macb->netdev.name, i);
+			return 1;
+		}
+	}
+
+	/* PHY isn't up to snuff */
+	printf("%s: PHY not found", macb->netdev.name);
+
+	return 0;
+}
+#endif /* CONFIG_MACB_SEARCH_PHY */
+
+
 static int macb_phy_init(struct macb_device *macb)
 {
 	struct eth_device *netdev = &macb->netdev;
@@ -325,6 +349,13 @@ static int macb_phy_init(struct macb_device *macb)
 	int media, speed, duplex;
 	int i;
 
+#ifdef CONFIG_MACB_SEARCH_PHY
+	/* Auto-detect phy_addr */
+	if (!macb_phy_find(macb)) {
+		return 0;
+	}
+#endif /* CONFIG_MACB_SEARCH_PHY */
+
 	/* Check if the PHY is up to snuff... */
 	phy_id = macb_mdio_read(macb, MII_PHYSID1);
 	if (phy_id == 0xffff) {