From: Simon Glass Date: Wed, 23 Nov 2016 13:34:40 +0000 (-0700) Subject: arm: exynos: i2c: Convert exynos boards to use DM_I2C X-Git-Tag: v2017.01-rc1~9^2~5 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=fc47cf9d054b79299274f4386cfb867a80af8c7b;p=u-boot arm: exynos: i2c: Convert exynos boards to use DM_I2C Three boards are still not converting to use DM_I2C. They are also using the old PMIC framework. Rather than removing them, add #ifdefs to allow them to continue to build. This will give the maintainers a little more time to decide whether to convert them or not. Signed-off-by: Simon Glass Acked-by: Heiko Schocher --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cead0401cd..f0110266bc 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -406,6 +406,7 @@ config TARGET_BCMNSP config ARCH_EXYNOS bool "Samsung EXYNOS" select DM + select DM_I2C select DM_SPI_FLASH select DM_SERIAL select DM_SPI diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c index 77d0a4e837..203136fb97 100644 --- a/board/samsung/common/misc.c +++ b/board/samsung/common/misc.c @@ -101,6 +101,7 @@ void set_board_info(void) #ifdef CONFIG_LCD_MENU static int power_key_pressed(u32 reg) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ struct pmic *pmic; u32 status; u32 mask; @@ -123,6 +124,9 @@ static int power_key_pressed(u32 reg) return 0; return !!(status & mask); +#else + return 0; +#endif } static int key_pressed(int key) diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 66a54d436d..7200c2ee0b 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -53,6 +53,7 @@ int exynos_init(void) void i2c_init_board(void) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ int err; /* I2C_5 -> PMIC */ @@ -67,8 +68,10 @@ void i2c_init_board(void) gpio_request(EXYNOS4_GPIO_Y41, "i2c_data"); gpio_direction_output(EXYNOS4_GPIO_Y40, 1); gpio_direction_output(EXYNOS4_GPIO_Y41, 1); +#endif } +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ static void trats_low_power_mode(void) { struct exynos4_clock *clk = @@ -273,11 +276,14 @@ static int pmic_init_max8997(void) puts("MAX8997 PMIC setting error!\n"); return -1; } + return 0; } +#endif int exynos_power_init(void) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ int chrg, ret; struct power_battery *pb; struct pmic *p_fg, *p_chrg, *p_muic, *p_bat; @@ -341,6 +347,7 @@ int exynos_power_init(void) if (pb->bat->state == CHARGE && chrg == CHARGER_USB) puts("CHARGE Battery !\n"); +#endif return 0; } @@ -384,6 +391,7 @@ static void check_hw_revision(void) #ifdef CONFIG_USB_GADGET static int s5pc210_phy_control(int on) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ int ret = 0; u32 val = 0; struct pmic *p = pmic_get("MAX8997_PMIC"); @@ -415,6 +423,7 @@ static int s5pc210_phy_control(int on) puts("MAX8997 LDO setting error!\n"); return -1; } +#endif return 0; } @@ -435,11 +444,16 @@ int board_usb_init(int index, enum usb_init_type init) int g_dnl_board_usb_cable_connected(void) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ struct pmic *muic = pmic_get("MAX8997_MUIC"); if (!muic) return 0; return !!muic->chrg->chrg_type(muic); +#else + return false; +#endif + } #endif @@ -552,6 +566,7 @@ void exynos_reset_lcd(void) int lcd_power(void) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ int ret = 0; struct pmic *p = pmic_get("MAX8997_PMIC"); if (!p) @@ -569,12 +584,13 @@ int lcd_power(void) puts("MAX8997 LDO setting error!\n"); return -1; } - +#endif return 0; } int mipi_power(void) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ int ret = 0; struct pmic *p = pmic_get("MAX8997_PMIC"); if (!p) @@ -592,7 +608,7 @@ int mipi_power(void) puts("MAX8997 LDO setting error!\n"); return -1; } - +#endif return 0; } diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c index 7b28ae8cc7..150503ec15 100644 --- a/board/samsung/trats2/trats2.c +++ b/board/samsung/trats2/trats2.c @@ -151,8 +151,6 @@ int exynos_early_init_f(void) return 0; } -static int pmic_init_max77686(void); - int exynos_init(void) { struct exynos4_power *pwr = @@ -176,6 +174,7 @@ int exynos_init(void) int exynos_power_init(void) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ int chrg; struct power_battery *pb; struct pmic *p_chrg, *p_muic, *p_fg, *p_bat; @@ -236,13 +235,14 @@ int exynos_power_init(void) if (pb->bat->state == CHARGE && chrg == CHARGER_USB) puts("CHARGE Battery !\n"); - +#endif return 0; } #ifdef CONFIG_USB_GADGET static int s5pc210_phy_control(int on) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ int ret = 0; unsigned int val; struct pmic *p, *p_pmic, *p_muic; @@ -299,7 +299,7 @@ static int s5pc210_phy_control(int on) if (ret) return -1; - +#endif return 0; } @@ -319,14 +319,19 @@ int board_usb_init(int index, enum usb_init_type init) int g_dnl_board_usb_cable_connected(void) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ struct pmic *muic = pmic_get("MAX77693_MUIC"); if (!muic) return 0; return !!muic->chrg->chrg_type(muic); +#else + return false; +#endif } #endif +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ static int pmic_init_max77686(void) { struct pmic *p = pmic_get("MAX77686_PMIC"); @@ -379,6 +384,7 @@ static int pmic_init_max77686(void) return 0; } +#endif /* * LCD @@ -387,18 +393,21 @@ static int pmic_init_max77686(void) #ifdef CONFIG_LCD int mipi_power(void) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ struct pmic *p = pmic_get("MAX77686_PMIC"); /* LDO8 VMIPI_1.0V_AP */ max77686_set_ldo_mode(p, 8, OPMODE_ON); /* LDO10 VMIPI_1.8V_AP */ max77686_set_ldo_mode(p, 10, OPMODE_ON); +#endif return 0; } void exynos_lcd_power_on(void) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ struct pmic *p = pmic_get("MAX77686_PMIC"); /* LCD_2.2V_EN: GPC0[1] */ @@ -410,6 +419,7 @@ void exynos_lcd_power_on(void) pmic_probe(p); max77686_set_ldo_voltage(p, 25, 3100000); max77686_set_ldo_mode(p, 25, OPMODE_LPM); +#endif } void exynos_reset_lcd(void) diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index 81e35b6f75..c3946ee891 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -38,10 +38,9 @@ static int get_hwrev(void) return board_rev & 0xFF; } -static void init_pmic_lcd(void); - int exynos_power_init(void) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ int ret; /* @@ -53,7 +52,7 @@ int exynos_power_init(void) return ret; init_pmic_lcd(); - +#endif return 0; } @@ -84,6 +83,7 @@ static unsigned short get_adc_value(int channel) static int adc_power_control(int on) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ int ret; struct pmic *p = pmic_get("MAX8998_PMIC"); if (!p) @@ -97,6 +97,9 @@ static int adc_power_control(int on) MAX8998_LDO4, !!on); return ret; +#else + return 0; +#endif } static unsigned int get_hw_revision(void) @@ -144,6 +147,7 @@ static void check_hw_revision(void) #ifdef CONFIG_USB_GADGET static int s5pc210_phy_control(int on) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ int ret = 0; struct pmic *p = pmic_get("MAX8998_PMIC"); if (!p) @@ -175,7 +179,7 @@ static int s5pc210_phy_control(int on) puts("MAX8998 LDO setting error!\n"); return -1; } - +#endif return 0; } @@ -201,6 +205,7 @@ int exynos_early_init_f(void) return 0; } +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ static void init_pmic_lcd(void) { unsigned char val; @@ -248,6 +253,7 @@ static void init_pmic_lcd(void) if (ret) puts("LCD pmic initialisation error!\n"); } +#endif void exynos_cfg_lcd_gpio(void) { @@ -304,6 +310,7 @@ void exynos_reset_lcd(void) void exynos_lcd_power_on(void) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ struct pmic *p = pmic_get("MAX8998_PMIC"); if (!p) @@ -314,6 +321,7 @@ void exynos_lcd_power_on(void) pmic_set_output(p, MAX8998_REG_ONOFF3, MAX8998_LDO17, LDO_ON); pmic_set_output(p, MAX8998_REG_ONOFF2, MAX8998_LDO7, LDO_ON); +#endif } void exynos_cfg_ldo(void) @@ -328,8 +336,9 @@ void exynos_enable_ldo(unsigned int onoff) int exynos_init(void) { +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ char buf[16]; - +#endif gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210; switch (get_hwrev()) { @@ -354,13 +363,14 @@ int exynos_init(void) break; } +#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ /* Request soft I2C gpios */ strcpy(buf, "soft_i2c_scl"); gpio_request(CONFIG_SOFT_I2C_GPIO_SCL, buf); strcpy(buf, "soft_i2c_sda"); gpio_request(CONFIG_SOFT_I2C_GPIO_SDA, buf); - +#endif check_hw_revision(); printf("HW Revision:\t0x%x\n", board_rev); diff --git a/configs/origen_defconfig b/configs/origen_defconfig index 0d91ec1c4d..7b9826ad61 100644 --- a/configs/origen_defconfig +++ b/configs/origen_defconfig @@ -37,3 +37,4 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_G_DNL_MANUFACTURER="Samsung" CONFIG_G_DNL_VENDOR_NUM=0x04e8 CONFIG_G_DNL_PRODUCT_NUM=0x6601 +CONFIG_DM_I2C=y diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 0210c5bb72..1bfefe9dff 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -153,25 +153,6 @@ #define CONFIG_SAMSUNG_ONENAND #define CONFIG_SYS_ONENAND_BASE 0x0C000000 -#include -/* - * I2C Settings - */ -#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_B7 -#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_B6 - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0 -#define CONFIG_SOFT_I2C_READ_REPEATED_START -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_MAX_I2C_BUS 7 - -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_MAX8998 - #define CONFIG_USB_GADGET_DWC2_OTG_PHY /* diff --git a/include/configs/trats.h b/include/configs/trats.h index a26d6632f2..a771ddb27c 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -178,36 +178,6 @@ /* GPT */ #define CONFIG_RANDOM_UUID -/* I2C */ -#include - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_S3C24X0 -#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 -#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0xFE -#define CONFIG_MAX_I2C_NUM 8 -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F -#define CONFIG_SOFT_I2C_READ_REPEATED_START -#define CONFIG_SYS_I2C_INIT_BOARD - -/* I2C FG */ -#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_Y41 -#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_Y40 - -/* POWER */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_MAX8997 - -#define CONFIG_POWER_FG -#define CONFIG_POWER_FG_MAX17042 -#define CONFIG_POWER_MUIC -#define CONFIG_POWER_MUIC_MAX8997 -#define CONFIG_POWER_BATTERY -#define CONFIG_POWER_BATTERY_TRATS - /* Security subsystem - enable hw_rand() */ #define CONFIG_EXYNOS_ACE_SHA #define CONFIG_LIB_HW_RAND diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 1633c67dd1..1cd3e14235 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -155,39 +155,6 @@ /* GPT */ #define CONFIG_RANDOM_UUID -/* I2C */ -#include - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_S3C24X0 -#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 -#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0 -#define CONFIG_MAX_I2C_NUM 8 -#define CONFIG_SYS_I2C_SOFT -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 -#define I2C_SOFT_DECLARATIONS2 -#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x00 -#define CONFIG_SOFT_I2C_READ_REPEATED_START -#define CONFIG_SYS_I2C_INIT_BOARD - -#ifndef __ASSEMBLY__ -int get_soft_i2c_scl_pin(void); -int get_soft_i2c_sda_pin(void); -#endif -#define CONFIG_SOFT_I2C_GPIO_SCL get_soft_i2c_scl_pin() -#define CONFIG_SOFT_I2C_GPIO_SDA get_soft_i2c_sda_pin() - -/* POWER */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_MAX77686 -#define CONFIG_POWER_PMIC_MAX77693 -#define CONFIG_POWER_MUIC_MAX77693 -#define CONFIG_POWER_FG_MAX77693 -#define CONFIG_POWER_BATTERY_TRATS2 - /* Security subsystem - enable hw_rand() */ #define CONFIG_EXYNOS_ACE_SHA #define CONFIG_LIB_HW_RAND