From: Tom Rini <trini@ti.com>
Date: Thu, 11 Dec 2014 23:40:49 +0000 (-0500)
Subject: Merge branch 'master' of git://git.denx.de/u-boot-usb
X-Git-Tag: v2015.01-rc4~28
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=fc9b0b80435cda721fbdbe507c9e4f388b0ea62b;p=u-boot

Merge branch 'master' of git://git.denx.de/u-boot-usb

Conflicts:
	board/freescale/mx6sxsabresd/mx6sxsabresd.c

Signed-off-by: Tom Rini <trini@ti.com>
---

fc9b0b80435cda721fbdbe507c9e4f388b0ea62b
diff --cc board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 8b959b9fc6,02e82b2524..fd8bc72827
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@@ -25,7 -25,8 +25,9 @@@
  #include <netdev.h>
  #include <power/pmic.h>
  #include <power/pfuze100_pmic.h>
 +#include "../common/pfuze.h"
+ #include <usb.h>
+ #include <usb/ehci-fsl.h>
  
  DECLARE_GLOBAL_DATA_PTR;
  
@@@ -212,6 -223,6 +214,49 @@@ int power_init_board(void
  	return 0;
  }
  
++#ifdef CONFIG_USB_EHCI_MX6
++#define USB_OTHERREGS_OFFSET	0x800
++#define UCTRL_PWR_POL		(1 << 9)
++
++static iomux_v3_cfg_t const usb_otg_pads[] = {
++	/* OGT1 */
++	MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
++	MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
++	/* OTG2 */
++	MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)
++};
++
++static void setup_usb(void)
++{
++	imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
++					 ARRAY_SIZE(usb_otg_pads));
++}
++
++int board_usb_phy_mode(int port)
++{
++	if (port == 1)
++		return USB_INIT_HOST;
++	else
++		return usb_phy_mode(port);
++}
++
++int board_ehci_hcd_init(int port)
++{
++	u32 *usbnc_usb_ctrl;
++
++	if (port > 1)
++		return -EINVAL;
++
++	usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
++				 port * 4);
++
++	/* Set Power polarity */
++	setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
++
++	return 0;
++}
++#endif
++
  int board_phy_config(struct phy_device *phydev)
  {
  	/*
@@@ -321,8 -319,8 +370,7 @@@ int board_mmc_init(bd_t *bis
  
  	return 0;
  }
 -#endif
  
- 
  int board_init(void)
  {
  	/* Address of boot parameters */