From: Chen-Yu Tsai Date: Fri, 28 Oct 2016 10:21:38 +0000 (+0800) Subject: sunxi: Add support for Cubieboard4 X-Git-Tag: v2016.11-rc3~16^2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=fda9d5d327302e2e5a45ade25e88edc0002336ec;p=u-boot sunxi: Add support for Cubieboard4 The Cubieboard4 is an A80 SoC based development board from Cubietech. This board has a UART port, 4 USB host ports, a USB 3.0 OTG connector, HDMI and VGA outputs, a micro SD slot, 8G eMMC flash, 2G DRAM, a WiFi/BT combo chip, headphone and microphone jacks, IR receiver, and GPIO headers. Signed-off-by: Chen-Yu Tsai Acked-by: Hans de Goede Signed-off-by: Hans de Goede --- diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 88abf2df7b..d7dc55bfc1 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -122,6 +122,11 @@ F: include/configs/sun7i.h F: configs/Cubieboard2_defconfig F: configs/Cubietruck_defconfig +CUBIEBOARD4 BOARD +M: Chen-Yu Tsai +S: Maintained +F: configs/Cubieboard4_defconfig + CUBIETRUCK-PLUS BOARD M: Chen-Yu Tsai S: Maintained diff --git a/configs/Cubieboard4_defconfig b/configs/Cubieboard4_defconfig new file mode 100644 index 0000000000..4d36d39e59 --- /dev/null +++ b/configs/Cubieboard4_defconfig @@ -0,0 +1,18 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN9I=y +CONFIG_DRAM_CLK=672 +CONFIG_MMC0_CD_PIN="PH18" +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH16" +CONFIG_USB1_VBUS_PIN="PH14" +CONFIG_USB3_VBUS_PIN="PH15" +CONFIG_AXP_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-cubieboard4" +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_AXP809_POWER=y