]> git.sur5r.net Git - openocd/log
openocd
14 years agoARM: rename ARMV4_5_MODE_* as ARM_MODE_*
David Brownell [Sat, 5 Dec 2009 03:21:14 +0000 (19:21 -0800)]
ARM: rename ARMV4_5_MODE_* as ARM_MODE_*

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agoARM: rename ARMV4_5_STATE_* as ARM_STATE_*
David Brownell [Sat, 5 Dec 2009 03:14:48 +0000 (19:14 -0800)]
ARM: rename ARMV4_5_STATE_* as ARM_STATE_*

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agoARM11: report watchpoint trigger insn
David Brownell [Sat, 5 Dec 2009 02:57:31 +0000 (18:57 -0800)]
ARM11: report watchpoint trigger insn

As with Cortex-A8, the WFAR register holds useful information
that should be recorded and, where relevant, displayed.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agoARM11: basic watchpoint support
David Brownell [Sat, 5 Dec 2009 02:57:31 +0000 (18:57 -0800)]
ARM11: basic watchpoint support

Use the DPM watchpoint support; remove old incomplete stubs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agoARM11: tweak TAP ops and debugging
David Brownell [Sat, 5 Dec 2009 02:57:30 +0000 (18:57 -0800)]
ARM11: tweak TAP ops and debugging

Tweak scanchain 7 debug messaging:

 - show register addresses in decimal, matching ARM docs;
 - remove some pointless noise

Avoid some needless roundtrips:

 - skip SCAN_N when SCREG already holds that number (speeds up
   polling and other common operations)
 - avoid zeroing vcr twice on resume

Show the IR opcode as a label ("RESTART") too; and in decimal,
matching ARM docs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agoreorder build order of src directory
Zachary T Welch [Fri, 4 Dec 2009 12:42:38 +0000 (04:42 -0800)]
reorder build order of src directory

Descend into the library modules in order, from bottom-to-top.

14 years agoremove flash.h from tree
Zachary T Welch [Sat, 5 Dec 2009 00:40:19 +0000 (16:40 -0800)]
remove flash.h from tree

Remove the now vestigial <flash/flash.h> header from the tree,
replacing a few references with <flash/nor/core.h>

14 years agosplit flash.h into into flash/nor/*.h
Zachary T Welch [Sat, 5 Dec 2009 00:07:47 +0000 (16:07 -0800)]
split flash.h into into flash/nor/*.h

Move the bulk of the flash.h file into flash/nor/core.h, leaving an
empty husk that will be removed in the next patch.

The NOR driver structure is an implementation detail, so move it into
its own private header file <flash/nor/driver.h> along with helper
declaration for finding them by name.

14 years agoremove target.h from flash.h
Zachary T Welch [Fri, 4 Dec 2009 22:06:20 +0000 (14:06 -0800)]
remove target.h from flash.h

The flash.h header does not require the target.h header file, but
its implementation source files do.  Move it to flash/nor/imp.h.

14 years agosplit NOR and NAND flash headers
Zachary T Welch [Fri, 4 Dec 2009 21:42:09 +0000 (13:42 -0800)]
split NOR and NAND flash headers

Moves common flash errors to <flash/common.h> to decouple these two
mostly unrelated trees of code.

14 years agoeliminate src/flash/flash.c
Zachary T Welch [Fri, 4 Dec 2009 12:37:27 +0000 (04:37 -0800)]
eliminate src/flash/flash.c

Move remaining NOR flash implemenation into flash/nor/core.c
Removes flash.c from the build, leaving only its header to split.

14 years agoadd flash/nor/drivers.c
Zachary T Welch [Fri, 4 Dec 2009 12:10:42 +0000 (04:10 -0800)]
add flash/nor/drivers.c

Encapsulates access to the flash_drivers array, providing a base
of operations for future dynamic driver module loading features.

14 years agomove more nor flash implementation details
Zachary T Welch [Fri, 4 Dec 2009 12:01:45 +0000 (04:01 -0800)]
move more nor flash implementation details

Splits the exec mode commands out of flash.c into the flash/nor/ files.
The routines used by these high-level commands are moved into nor/core.c,
with their internal declarations placed in nor/imp.h.

Fixes distribution of <flash/nor/core.h> header.

14 years agoARM: semihosting entry cleanup
David Brownell [Sat, 5 Dec 2009 00:51:48 +0000 (16:51 -0800)]
ARM: semihosting entry cleanup

Clean up arm_semihosting() entry a bit, comment some issues and just
which SVC opcodes are getting intercepted.  Microcontroller profile
cores will need a new entry, since they use BKPT instead (and don't
have either SVC mode or an SPSR register).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agoARM: remove semihosting globals
David Brownell [Sat, 5 Dec 2009 00:51:48 +0000 (16:51 -0800)]
ARM: remove semihosting globals

Store a flag and errno in in "struct arm".
Have "poll" output report when semihosting is active.
Shrink some of the affected lines.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agoUser's Guide: more semihosting info
David Brownell [Fri, 4 Dec 2009 18:11:31 +0000 (10:11 -0800)]
User's Guide: more semihosting info

List it in the concept index, in the section about target software
changes a project might want to consider, and in the section about
debug messaging.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agobootstrap: stop execution upon error
Øyvind Harboe [Fri, 4 Dec 2009 08:50:55 +0000 (09:50 +0100)]
bootstrap: stop execution upon error

When tools are not installed, exit immediately. This makes
the error messages clearer.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
14 years agoadd flash/nor/core.[ch]
Zachary T Welch [Fri, 4 Dec 2009 01:14:07 +0000 (17:14 -0800)]
add flash/nor/core.[ch]

The newly moved flash TCL routines access the internals of the module
too much.  Fix the layering issues by adding new core NOR flash APIs:

<flash/nor/core.h>:
  - flash_driver_find_by_name() - self-descriptive

<flash/nor/imp.h>:
  - flash_bank_add()            - encapsulates adding banks to bank list
  - flash_bank_list()           - encapsulates retreiving bank list

This allows the externs in flash/nor/imp.h to be removed, and
these mechanisms may now be re-used by other flash module code.

14 years agoadd flash/nor/{tcl.c,imp.h} from flash/flash.c
Zachary T Welch [Fri, 4 Dec 2009 00:47:49 +0000 (16:47 -0800)]
add flash/nor/{tcl.c,imp.h} from flash/flash.c

Moves the top-level 'flash' command handlers into flash/nor/tcl.c,
with flash/nor/imp.h providing an internal implementation header
to share non-public API components.

14 years agoseparate Jim from jtag/core.c
Zachary T Welch [Fri, 4 Dec 2009 00:25:51 +0000 (16:25 -0800)]
separate Jim from jtag/core.c

After previous efforts, only one Jim routine remained in jtag/core.c,
and moving it to jtag/tcl.c painlessly finishes separating these layers.
The headers need separating, but the implementation is clean.

14 years agoswitch 'rm' command away from using Jim
Zachary T Welch [Fri, 4 Dec 2009 00:22:46 +0000 (16:22 -0800)]
switch 'rm' command away from using Jim

Commands that do not need to use Jim should be registered as
high-level command handlers.

14 years agocheck top-level command registrations
Zachary T Welch [Fri, 4 Dec 2009 01:38:24 +0000 (17:38 -0800)]
check top-level command registrations

When calling module_register_commands, the return value needs to be
checked for failures.  Instead of duplicating code, use an array of
function pointers to the identical registration functions to iterate
over during startup.

14 years agoallow 'jtag init' to be run in any mode
Zachary T Welch [Fri, 4 Dec 2009 01:41:39 +0000 (17:41 -0800)]
allow 'jtag init' to be run in any mode

Help alleviate further potential problems with interactive startup.

14 years agotarget: cygwin build fixes
David Brownell [Fri, 4 Dec 2009 08:42:36 +0000 (00:42 -0800)]
target: cygwin build fixes

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agozy1000: FPGA revC wip
Øyvind Harboe [Fri, 4 Dec 2009 07:20:38 +0000 (08:20 +0100)]
zy1000: FPGA revC wip

The bug in revC register memory access is pretty much
cornered now.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
14 years agobasic ARM semihosting support
Nicolas Pitre [Thu, 3 Dec 2009 22:27:13 +0000 (17:27 -0500)]
basic ARM semihosting support

Semihosting enables code running on an ARM target to use the
I/O facilities on the host computer. The target application must
be linked against a library that forwards operation requests by
using the SVC instruction that is trapped at the Supervisor Call
vector by the debugger.  The "hosted" library version provided
with CodeSourcery's Sourcery G++ Lite for ARM EABI is one example.

This is currently available for ARM9 processors, but any ARM
variant should be able to support this with little additional work.

Tested using binaries compiled with Sourcery G++ Lite 2009q1-161
and ARM RVCT 3.0.

[dbrownell@users.sourceforge.net: doc tweaks, NEWS]

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agodoxygen: remove some warnings
David Brownell [Fri, 4 Dec 2009 02:31:38 +0000 (18:31 -0800)]
doxygen: remove some warnings

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agoMake ARM NAND I/O operations aware of last op
Dean Glazeski [Mon, 16 Nov 2009 19:40:46 +0000 (13:40 -0600)]
Make ARM NAND I/O operations aware of last op

Updates the ARM NAND I/O code to look at and update the op
field of arm_nand_data to reflect the last operation performed.
It uses this field to copy the correct code to the target in the
case where the struct is used for reads and writes.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agoARM NAND I/O interface update
Dean Glazeski [Mon, 16 Nov 2009 19:34:24 +0000 (13:34 -0600)]
ARM NAND I/O interface update

Modify the arm_nand_data struct to better support both read and
write operations while using the same struct.  An additional
field was added, and initialized, to record the last operation
so that the correct code can be loaded to the working area.

[dbrownell@users.sourceforge.net: merge init patch, tweak GPL note]

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agoNAND page command refactoring.
Dean Glazeski [Fri, 20 Nov 2009 06:19:39 +0000 (00:19 -0600)]
NAND page command refactoring.

Created a new function that handles sending a command and the address
information for pages to a NAND device.

[dbrownell@users.sourceforge.net: tweaked line lengths, name 'oob_only']

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agoARMv7-A: tweak arch_state()
David Brownell [Fri, 4 Dec 2009 00:18:24 +0000 (16:18 -0800)]
ARMv7-A: tweak arch_state()

Punt to the armv4_5_arch_state() for all the common stuff, to
shrink code and so we will get any improvements it provides.

Don't hide watchpoint status if we happen to be in "abort" mode.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agoARM DPM: share debug reason logic
David Brownell [Fri, 4 Dec 2009 00:08:04 +0000 (16:08 -0800)]
ARM DPM: share debug reason logic

No point in both ARM11 and Cortex-A8 having private copies
of the logic sorting out e.g. DBG_REASON_WATCHPOINT.

Add and use a shared routine for this ... there's actually
a bunch more debug entry logic that could be shared, this
is just a start on that.  Note that this routine fixes a
bug observed in the ARM11 code, where some abort mode quirks
were displayed as being an unknown debug reason; and also
silences needless ARM11 chatter.

Likewise with private copies of DSCR ... add one to the DPM
struct.  Save it as part of setting DBG_REASON_* so later
patches can switch over to using that copy.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agoARM11: use shared DSCR bit names
David Brownell [Fri, 4 Dec 2009 00:08:04 +0000 (16:08 -0800)]
ARM11: use shared DSCR bit names

For the bits now defined in "arm_dpm.h", switch to the
shared DSCR_* symbol and remove the ARM11_DSCR_* version.

Define DSCR_INT_DIS and use it instead of the ARM11_DSCR_*
sibling symbol.  (Note:  for both ARM11 and Cortex-A8, this
should arguably be enabled by default when single stepping.)

Remove some other unused declarations in "arm11.h".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agoARM DPM: make DSCR bit defs sharable
David Brownell [Fri, 4 Dec 2009 00:08:04 +0000 (16:08 -0800)]
ARM DPM: make DSCR bit defs sharable

Move the symbols for these bits from "armv7a.h" to "arm_dpm.h",
where they can be seen and used not just by Cortex-A but also
by the ARM11 (armv6) code.

Change them from bit numbers to bit masks ... this matches the
usage in ARM11 code, and also makes it easier to read.

Rename DSCR_EXT_INT_EN as DSCR_ITR_EN to match the docs; it's
enabling ITR functionality, not external interrupts, so this
changes the name to be less misleading.  (There *IS* a bit
affecting interrupts, and this isn't it.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agofix another init regression
David Brownell [Thu, 3 Dec 2009 22:44:03 +0000 (14:44 -0800)]
fix another init regression

This makes Beagle work again, instead of losing horribly because
the JTAG event handlers are no longer able to e.g. "runtest".  I
get the previous quirky behavior ... comes up OK but "reset halt"
somewhat mysteriously makes it all better.  (Instead of nothing
being able to work at all...)  However, I'm still seeing:

 The 'init' command must be used before 'init'.

That seems to come from invoking "jtag init", sometime after it
gets mapped to "ocd_jtag init", according to debug message traces.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years agofix double 'init' regression
Zachary T Welch [Thu, 3 Dec 2009 13:23:16 +0000 (05:23 -0800)]
fix double 'init' regression

To prevent regression in the behavior of 'init', we allow it to run in
any mode.  If provided with -c init and with -c noinit, then the second
init at startup caused a spurious mode failure.  Let 'init' handle it.

14 years agofix regressions with GDB port numbers
Zachary T Welch [Thu, 3 Dec 2009 13:13:45 +0000 (05:13 -0800)]
fix regressions with GDB port numbers

Use a separate variable for iterating GDB service port numbers than
the one set by the user.  Restores the behavior of returning the
original port number and only incrementing the port used on success.

14 years agozy1000: include files have moved about
Øyvind Harboe [Thu, 3 Dec 2009 12:47:25 +0000 (13:47 +0100)]
zy1000: include files have moved about

now compiles again after include files were moved about
to reduce -I usage and stop using quotes but rather
angle brackets for include files.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
14 years agoremove tertiary include paths
Zachary T Welch [Sun, 29 Nov 2009 00:27:10 +0000 (16:27 -0800)]
remove tertiary include paths

With all #include directives converted, we only need to have the
top-level src/ directory in the search path.

14 years agochange #include "../hello.h" to "hello.h"
Zachary T Welch [Thu, 3 Dec 2009 11:46:15 +0000 (03:46 -0800)]
change #include "../hello.h" to "hello.h"

Before we can -I the top-level src/ directory alone, references to
"hello.h" must be updated.  This is an internal header, so it does
not need angle brackets.

14 years agochange #include "xsvf.h" to <xsvf/xsvf.h>
Zachary T Welch [Thu, 3 Dec 2009 12:15:05 +0000 (04:15 -0800)]
change #include "xsvf.h" to <xsvf/xsvf.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "xsvf.h"

the following form should be used.

#include <xsvf/xsvf.h>

The exception is from .c files in the same directory.

14 years agochange #include "svf.h" to <svf/svf.h>
Zachary T Welch [Thu, 3 Dec 2009 12:15:05 +0000 (04:15 -0800)]
change #include "svf.h" to <svf/svf.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "svf.h"

the following form should be used.

#include <svf/svf.h>

The exception is from .c files in the same directory.

14 years agochange #include "pld.h" to <pld/pld.h>
Zachary T Welch [Thu, 3 Dec 2009 12:15:04 +0000 (04:15 -0800)]
change #include "pld.h" to <pld/pld.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "pld.h"

the following form should be used.

#include <pld/pld.h>

The exception is from .c files in the same directory.

14 years agochange #include "telnet_server.h" to <server/telnet_server.h>
Zachary T Welch [Thu, 3 Dec 2009 12:15:03 +0000 (04:15 -0800)]
change #include "telnet_server.h" to <server/telnet_server.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "telnet_server.h"

the following form should be used.

#include <server/telnet_server.h>

The exception is from .c files in the same directory.

14 years agochange #include "server.h" to <server/server.h>
Zachary T Welch [Thu, 3 Dec 2009 12:15:03 +0000 (04:15 -0800)]
change #include "server.h" to <server/server.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "server.h"

the following form should be used.

#include <server/server.h>

The exception is from .c files in the same directory.

14 years agochange #include "httpd.h" to <server/httpd.h>
Zachary T Welch [Thu, 3 Dec 2009 12:15:03 +0000 (04:15 -0800)]
change #include "httpd.h" to <server/httpd.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "httpd.h"

the following form should be used.

#include <server/httpd.h>

The exception is from .c files in the same directory.

14 years agochange #include "gdb_server.h" to <server/gdb_server.h>
Zachary T Welch [Thu, 3 Dec 2009 12:15:02 +0000 (04:15 -0800)]
change #include "gdb_server.h" to <server/gdb_server.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "gdb_server.h"

the following form should be used.

#include <server/gdb_server.h>

The exception is from .c files in the same directory.

14 years agochange #include "s3c24xx_regs.h" to <flash/nand/s3c24xx_regs.h>
Zachary T Welch [Thu, 3 Dec 2009 12:15:02 +0000 (04:15 -0800)]
change #include "s3c24xx_regs.h" to <flash/nand/s3c24xx_regs.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "s3c24xx_regs.h"

the following form should be used.

#include <flash/nand/s3c24xx_regs.h>

The exception is from .c files in the same directory.

14 years agochange #include "ocl.h" to <flash/nor/ocl.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:58 +0000 (04:14 -0800)]
change #include "ocl.h" to <flash/nor/ocl.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "ocl.h"

the following form should be used.

#include <flash/nor/ocl.h>

The exception is from .c files in the same directory.

14 years agochange #include "nand.h" to <flash/nand.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:55 +0000 (04:14 -0800)]
change #include "nand.h" to <flash/nand.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "nand.h"

the following form should be used.

#include <flash/nand.h>

The exception is from .c files in the same directory.

14 years agochange #include "mflash.h" to <flash/mflash.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:55 +0000 (04:14 -0800)]
change #include "mflash.h" to <flash/mflash.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "mflash.h"

the following form should be used.

#include <flash/mflash.h>

The exception is from .c files in the same directory.

14 years agochange #include "flash.h" to <flash/flash.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:54 +0000 (04:14 -0800)]
change #include "flash.h" to <flash/flash.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "flash.h"

the following form should be used.

#include <flash/flash.h>

The exception is from .c files in the same directory.

14 years agochange #include "arm_nandio.h" to <flash/arm_nandio.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:54 +0000 (04:14 -0800)]
change #include "arm_nandio.h" to <flash/arm_nandio.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "arm_nandio.h"

the following form should be used.

#include <flash/arm_nandio.h>

The exception is from .c files in the same directory.

14 years agochange #include "trace.h" to <target/trace.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:52 +0000 (04:14 -0800)]
change #include "trace.h" to <target/trace.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "trace.h"

the following form should be used.

#include <target/trace.h>

The exception is from .c files in the same directory.

14 years agochange #include "target_request.h" to <target/target_request.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:51 +0000 (04:14 -0800)]
change #include "target_request.h" to <target/target_request.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "target_request.h"

the following form should be used.

#include <target/target_request.h>

The exception is from .c files in the same directory.

14 years agochange #include "target.h" to <target/target.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:51 +0000 (04:14 -0800)]
change #include "target.h" to <target/target.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "target.h"

the following form should be used.

#include <target/target.h>

The exception is from .c files in the same directory.

14 years agochange #include "register.h" to <target/register.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:50 +0000 (04:14 -0800)]
change #include "register.h" to <target/register.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "register.h"

the following form should be used.

#include <target/register.h>

The exception is from .c files in the same directory.

14 years agochange #include "mips_ejtag.h" to <target/mips_ejtag.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:49 +0000 (04:14 -0800)]
change #include "mips_ejtag.h" to <target/mips_ejtag.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "mips_ejtag.h"

the following form should be used.

#include <target/mips_ejtag.h>

The exception is from .c files in the same directory.

14 years agochange #include "mips32_pracc.h" to <target/mips32_pracc.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:49 +0000 (04:14 -0800)]
change #include "mips32_pracc.h" to <target/mips32_pracc.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "mips32_pracc.h"

the following form should be used.

#include <target/mips32_pracc.h>

The exception is from .c files in the same directory.

14 years agochange #include "mips32.h" to <target/mips32.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:48 +0000 (04:14 -0800)]
change #include "mips32.h" to <target/mips32.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "mips32.h"

the following form should be used.

#include <target/mips32.h>

The exception is from .c files in the same directory.

14 years agochange #include "image.h" to <target/image.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:47 +0000 (04:14 -0800)]
change #include "image.h" to <target/image.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "image.h"

the following form should be used.

#include <target/image.h>

The exception is from .c files in the same directory.

14 years agochange #include "etm.h" to <target/etm.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:46 +0000 (04:14 -0800)]
change #include "etm.h" to <target/etm.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "etm.h"

the following form should be used.

#include <target/etm.h>

The exception is from .c files in the same directory.

14 years agochange #include "embeddedice.h" to <target/embeddedice.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:45 +0000 (04:14 -0800)]
change #include "embeddedice.h" to <target/embeddedice.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "embeddedice.h"

the following form should be used.

#include <target/embeddedice.h>

The exception is from .c files in the same directory.

14 years agochange #include "breakpoints.h" to <target/breakpoints.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:44 +0000 (04:14 -0800)]
change #include "breakpoints.h" to <target/breakpoints.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "breakpoints.h"

the following form should be used.

#include <target/breakpoints.h>

The exception is from .c files in the same directory.

14 years agochange #include "avrt.h" to <target/avrt.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:44 +0000 (04:14 -0800)]
change #include "avrt.h" to <target/avrt.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "avrt.h"

the following form should be used.

#include <target/avrt.h>

The exception is from .c files in the same directory.

14 years agochange #include "armv7m.h" to <target/armv7m.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:43 +0000 (04:14 -0800)]
change #include "armv7m.h" to <target/armv7m.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "armv7m.h"

the following form should be used.

#include <target/armv7m.h>

The exception is from .c files in the same directory.

14 years agochange #include "armv7a.h" to <target/armv7a.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:43 +0000 (04:14 -0800)]
change #include "armv7a.h" to <target/armv7a.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "armv7a.h"

the following form should be used.

#include <target/armv7a.h>

The exception is from .c files in the same directory.

14 years agochange #include "armv4_5_mmu.h" to <target/armv4_5_mmu.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:42 +0000 (04:14 -0800)]
change #include "armv4_5_mmu.h" to <target/armv4_5_mmu.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "armv4_5_mmu.h"

the following form should be used.

#include <target/armv4_5_mmu.h>

The exception is from .c files in the same directory.

14 years agochange #include "armv4_5_cache.h" to <target/armv4_5_cache.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:42 +0000 (04:14 -0800)]
change #include "armv4_5_cache.h" to <target/armv4_5_cache.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "armv4_5_cache.h"

the following form should be used.

#include <target/armv4_5_cache.h>

The exception is from .c files in the same directory.

14 years agochange #include "armv4_5.h" to <target/armv4_5.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:42 +0000 (04:14 -0800)]
change #include "armv4_5.h" to <target/armv4_5.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "armv4_5.h"

the following form should be used.

#include <target/armv4_5.h>

The exception is from .c files in the same directory.

14 years agochange #include "arm_jtag.h" to <target/arm_jtag.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:41 +0000 (04:14 -0800)]
change #include "arm_jtag.h" to <target/arm_jtag.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "arm_jtag.h"

the following form should be used.

#include <target/arm_jtag.h>

The exception is from .c files in the same directory.

14 years agochange #include "arm_dpm.h" to <target/arm_dpm.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:40 +0000 (04:14 -0800)]
change #include "arm_dpm.h" to <target/arm_dpm.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "arm_dpm.h"

the following form should be used.

#include <target/arm_dpm.h>

The exception is from .c files in the same directory.

14 years agochange #include "arm_adi_v5.h" to <target/arm_adi_v5.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:39 +0000 (04:14 -0800)]
change #include "arm_adi_v5.h" to <target/arm_adi_v5.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "arm_adi_v5.h"

the following form should be used.

#include <target/arm_adi_v5.h>

The exception is from .c files in the same directory.

14 years agochange #include "arm9tdmi.h" to <target/arm9tdmi.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:39 +0000 (04:14 -0800)]
change #include "arm9tdmi.h" to <target/arm9tdmi.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "arm9tdmi.h"

the following form should be used.

#include <target/arm9tdmi.h>

The exception is from .c files in the same directory.

14 years agochange #include "arm966e.h" to <target/arm966e.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:38 +0000 (04:14 -0800)]
change #include "arm966e.h" to <target/arm966e.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "arm966e.h"

the following form should be used.

#include <target/arm966e.h>

The exception is from .c files in the same directory.

14 years agochange #include "arm7tdmi.h" to <target/arm7tdmi.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:37 +0000 (04:14 -0800)]
change #include "arm7tdmi.h" to <target/arm7tdmi.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "arm7tdmi.h"

the following form should be used.

#include <target/arm7tdmi.h>

The exception is from .c files in the same directory.

14 years agochange #include "arm7_9_common.h" to <target/arm7_9_common.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:37 +0000 (04:14 -0800)]
change #include "arm7_9_common.h" to <target/arm7_9_common.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "arm7_9_common.h"

the following form should be used.

#include <target/arm7_9_common.h>

The exception is from .c files in the same directory.

14 years agochange #include "arm11.h" to <target/arm11.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:36 +0000 (04:14 -0800)]
change #include "arm11.h" to <target/arm11.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "arm11.h"

the following form should be used.

#include <target/arm11.h>

The exception is from .c files in the same directory.

14 years agochange #include "algorithm.h" to <target/algorithm.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:35 +0000 (04:14 -0800)]
change #include "algorithm.h" to <target/algorithm.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "algorithm.h"

the following form should be used.

#include <target/algorithm.h>

The exception is from .c files in the same directory.

14 years agochange #include "minidriver.h" to <jtag/minidriver.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:32 +0000 (04:14 -0800)]
change #include "minidriver.h" to <jtag/minidriver.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "minidriver.h"

the following form should be used.

#include <jtag/minidriver.h>

The exception is from .c files in the same directory.

14 years agochange #include "jtag.h" to <jtag/jtag.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:31 +0000 (04:14 -0800)]
change #include "jtag.h" to <jtag/jtag.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "jtag.h"

the following form should be used.

#include <jtag/jtag.h>

The exception is from .c files in the same directory.

14 years agochange #include "interface.h" to <jtag/interface.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:31 +0000 (04:14 -0800)]
change #include "interface.h" to <jtag/interface.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "interface.h"

the following form should be used.

#include <jtag/interface.h>

The exception is from .c files in the same directory.

14 years agochange #include "commands.h" to <jtag/commands.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:30 +0000 (04:14 -0800)]
change #include "commands.h" to <jtag/commands.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "commands.h"

the following form should be used.

#include <jtag/commands.h>

The exception is from .c files in the same directory.

14 years agochange #include "types.h" to <helper/types.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:30 +0000 (04:14 -0800)]
change #include "types.h" to <helper/types.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "types.h"

the following form should be used.

#include <helper/types.h>

The exception is from .c files in the same directory.

14 years agochange #include "time_support.h" to <helper/time_support.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:29 +0000 (04:14 -0800)]
change #include "time_support.h" to <helper/time_support.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "time_support.h"

the following form should be used.

#include <helper/time_support.h>

The exception is from .c files in the same directory.

14 years agochange #include "replacements.h" to <helper/replacements.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:28 +0000 (04:14 -0800)]
change #include "replacements.h" to <helper/replacements.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "replacements.h"

the following form should be used.

#include <helper/replacements.h>

The exception is from .c files in the same directory.

14 years agochange #include "membuf.h" to <helper/membuf.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:28 +0000 (04:14 -0800)]
change #include "membuf.h" to <helper/membuf.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "membuf.h"

the following form should be used.

#include <helper/membuf.h>

The exception is from .c files in the same directory.

14 years agochange #include "log.h" to <helper/log.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:28 +0000 (04:14 -0800)]
change #include "log.h" to <helper/log.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "log.h"

the following form should be used.

#include <helper/log.h>

The exception is from .c files in the same directory.

14 years agochange #include "jim.h" to <helper/jim.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:27 +0000 (04:14 -0800)]
change #include "jim.h" to <helper/jim.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "jim.h"

the following form should be used.

#include <helper/jim.h>

The exception is from .c files in the same directory.

14 years agochange #include "ioutil.h" to <helper/ioutil.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:26 +0000 (04:14 -0800)]
change #include "ioutil.h" to <helper/ioutil.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "ioutil.h"

the following form should be used.

#include <helper/ioutil.h>

The exception is from .c files in the same directory.

14 years agochange #include "fileio.h" to <helper/fileio.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:26 +0000 (04:14 -0800)]
change #include "fileio.h" to <helper/fileio.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "fileio.h"

the following form should be used.

#include <helper/fileio.h>

The exception is from .c files in the same directory.

14 years agochange #include "configuration.h" to <helper/configuration.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:26 +0000 (04:14 -0800)]
change #include "configuration.h" to <helper/configuration.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "configuration.h"

the following form should be used.

#include <helper/configuration.h>

The exception is from .c files in the same directory.

14 years agochange #include "command.h" to <helper/command.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:25 +0000 (04:14 -0800)]
change #include "command.h" to <helper/command.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "command.h"

the following form should be used.

#include <helper/command.h>

The exception is from .c files in the same directory.

14 years agochange #include "binarybuffer.h" to <helper/binarybuffer.h>
Zachary T Welch [Thu, 3 Dec 2009 12:14:25 +0000 (04:14 -0800)]
change #include "binarybuffer.h" to <helper/binarybuffer.h>

Changes from the flat namespace to heirarchical one.  Instead of writing:

#include "binarybuffer.h"

the following form should be used.

#include <helper/binarybuffer.h>

The exception is from .c files in the same directory.

14 years agonormalize headers to make changing easier
Zachary T Welch [Thu, 3 Dec 2009 12:20:31 +0000 (04:20 -0800)]
normalize headers to make changing easier

These headers need minor tweaks to paves the way for wholesale
scripted coversion of the header files.

14 years agochange autoconf #include in configure.in
Zachary T Welch [Sun, 29 Nov 2009 00:25:30 +0000 (16:25 -0800)]
change autoconf #include in configure.in

Updates "system.h" and "replacements.h" with <helpers/system.h> and
<helpers/replacements.h> respectively.

14 years agoallow #include directives to use module name
Zachary T Welch [Tue, 24 Nov 2009 22:59:16 +0000 (14:59 -0800)]
allow #include directives to use module name

Includes the src directory in the search path, so header files may be
migrated from:

  #include "foo.h"

to
  #include <module/foo.h>

which is more conducive for installation.

14 years agoferoceon.c should be part of ARM7_9_SRC
Nicolas Pitre [Thu, 3 Dec 2009 07:06:10 +0000 (02:06 -0500)]
feroceon.c should be part of ARM7_9_SRC

The Feroceon and Dragonite cores are similar to the ARM926 and ARM966
cores respectively.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
14 years agoremove #if HAVE_JTAG_INTERFACE_H from minidriver.h
Zachary T Welch [Thu, 3 Dec 2009 01:30:33 +0000 (17:30 -0800)]
remove #if HAVE_JTAG_INTERFACE_H from minidriver.h

Adds two "minidriver_imp.h" files, so the right one is allowed to be
"#included" by the Makefile logic.

14 years agomove jtag drivers to src/jtag/drivers
Zachary T Welch [Thu, 3 Dec 2009 01:18:05 +0000 (17:18 -0800)]
move jtag drivers to src/jtag/drivers

Moves JTAG interface drivers to src/jtag/drivers/,
Adds src/jtag/drivers/Makefile.am.
Builds libocdjtagdrivers.la.

Flattens the rlink driver files into the drivers/ directory, adding
the 'rlink_' prefix or '.rlink' suffix as appropriate.