]> git.sur5r.net Git - openocd/log
openocd
9 years agodoc: Fix sort order of flash drivers
Andreas Färber [Fri, 16 Oct 2015 02:43:23 +0000 (04:43 +0200)]
doc: Fix sort order of flash drivers

fm3, nrf51, mdr, sim3x were at the end of the section rather than
inserted alphabetically. Fix this before adding further drivers.

Change-Id: Id23e04749cdd3b25d7503ec00fac554742d48c77
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3019
Tested-by: jenkins
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agotcl/board: Add Spansion SK-FM4-U120-9B560 config
Andreas Färber [Sun, 11 Oct 2015 01:01:49 +0000 (03:01 +0200)]
tcl/board: Add Spansion SK-FM4-U120-9B560 config

Change-Id: I01464b2a999890d50b95d0fb98ff46d8a04a2c57
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3009
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
9 years agoCortex-M: Detect Flash Patch Revision and implement Rev. 2 handling.
Uwe Bonnes [Wed, 15 Jul 2015 10:53:40 +0000 (12:53 +0200)]
Cortex-M: Detect Flash Patch Revision and implement Rev. 2 handling.

E.g. STM32F7 implements Rev.2.
Supercedes abandoned patch 2755 that doesn't evaluate Flash patch revision.

Change-Id: I48756b0451c7359475066969c900978a536bc328
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2868
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agofm4: Add JTAG support
Andreas Färber [Tue, 20 Oct 2015 00:28:12 +0000 (02:28 +0200)]
fm4: Add JTAG support

Add support for the JTAG TAPID found on SK-FM4-U120-9B560-MEM V1.1.0 board.

Change-Id: Idbfe28927e0c549f0c89c29904d23971281927c9
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3039
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
9 years agotcl/target: Prepare FM4 MB9BFxxx family
Andreas Färber [Sun, 11 Oct 2015 00:49:45 +0000 (02:49 +0200)]
tcl/target: Prepare FM4 MB9BFxxx family

It is found on the SK-FM4-U120-9B560-MEM V1.1.0 among others.

Change-Id: I4c708c9391e954cbbc8d0860a2a2dbd264aea865
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3008
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
9 years agofm4: Split out S6E2CC family config
Andreas Färber [Sun, 11 Oct 2015 00:06:00 +0000 (02:06 +0200)]
fm4: Split out S6E2CC family config

Its memory layout is different from MB9BFxxx.

Change-Id: I39c9f9cf582cd182971a9f83bb88c7a18da6cf15
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3007
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
9 years agotcl/board: Add Arndale config
Andreas Färber [Thu, 29 Oct 2015 17:45:00 +0000 (18:45 +0100)]
tcl/board: Add Arndale config

Tested with Olimex ARM-USB-OCD-H adapter.

Change-Id: I1bf68176f9c155f8803df5a10a7fbe03116c6309
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3081
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
9 years agotcl/target: Add Exynos5250 config
Andreas Färber [Thu, 29 Oct 2015 17:41:44 +0000 (18:41 +0100)]
tcl/target: Add Exynos5250 config

Change-Id: Ia673d3f16b2238d5af8fbeff2d57c6cf27dcffb1
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3080
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
9 years agotcl/board: Add config for XMOS xCORE-XA Core Module ARM debugging
Andreas Färber [Sun, 10 May 2015 12:53:33 +0000 (14:53 +0200)]
tcl/board: Add config for XMOS xCORE-XA Core Module ARM debugging

The xCORE-XA Core Module board has an XS1-XAU8A-10 SoC with 8 xCORE cores
and one ARM core. This config is for the ARM Cortex-M3, via J-Link OB.

Tested with "J-Link OB-STM32F103 V1 compiled Feb  5 2014 13:48:52".

Change-Id: Id7fadf8f323b45d5cfc0cae1054bd7b916771d6a
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2763
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agotcl/target: Add config for XMOS XS1-XAU8A-10's ARM core
Andreas Färber [Sun, 10 May 2015 12:45:32 +0000 (14:45 +0200)]
tcl/target: Add config for XMOS XS1-XAU8A-10's ARM core

The XS1-XAU8A-10 has 8 xCORE cores and one ARM core.
This config represents the ARM Cortex-M3 core, which is apparently
Silicon Labs EFM32 Giant Gecko IP.

Change-Id: I998360f096c759d2e274d96c1ca2e0450ba61146
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2762
Tested-by: jenkins
Reviewed-by: Oleksij Rempel
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agotcl/board: Add Digilent Analog Discovery config
Forest Crossman [Wed, 29 Apr 2015 07:29:10 +0000 (03:29 -0400)]
tcl/board: Add Digilent Analog Discovery config

Change-Id: Idf2cb8d8578e650fda4082f6bbf272518762ebf0
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Reviewed-on: http://openocd.zylin.com/2752
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
9 years agotcl: Support for reading "Device DNA" from Spartan 6 devices.
Tim 'mithro' Ansell [Sun, 27 Sep 2015 10:09:38 +0000 (20:09 +1000)]
tcl: Support for reading "Device DNA" from Spartan 6 devices.

Most Xilinx FPGA devices contain an embedded, unique device identifier
called the "Device DNA". The identifier is nonvolatile, permanently
programmed into the FPGA, and is unchangeable providing a great serial
/ tracking number.

Debugging was done in https://github.com/timvideos/HDMI2USB/issues/36

Change-Id: Iad03eafb40887f0321a4dc22858a7c3bf37a12b3
Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com>
Reviewed-on: http://openocd.zylin.com/2960
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agotcl: Adding the Numato Opsis board.
Tim 'mithro' Ansell [Sun, 27 Sep 2015 10:57:25 +0000 (20:57 +1000)]
tcl: Adding the Numato Opsis board.

Another board supported by the ixo-usb-jtag project.

Change-Id: I676197c64e208886bc03d1bafcc964ef1fc2160b
Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com>
Reviewed-on: http://openocd.zylin.com/2963
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agotcl: Adding the Digilent Atlys board.
Tim 'mithro' Ansell [Sun, 27 Sep 2015 10:54:07 +0000 (20:54 +1000)]
tcl: Adding the Digilent Atlys board.

The board is supported via the ixo-usb-jtag firmware.

Change-Id: I1e8a5ead850c0843b8532a5b54a7e7117778278e
Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com>
Reviewed-on: http://openocd.zylin.com/2962
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agotcl: Setting lowlevel driver for ixo-usb-jtag
Tim 'mithro' Ansell [Sun, 27 Sep 2015 10:33:59 +0000 (20:33 +1000)]
tcl: Setting lowlevel driver for ixo-usb-jtag

Also add further documentation about the project and how to use it.

Change-Id: Ia9878de566b3c8c1ea29f129287d5aea904d861d
Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com>
Reviewed-on: http://openocd.zylin.com/2961
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agonrf51: recognize hwid 0084
Peter A. Bigot [Thu, 13 Aug 2015 14:20:25 +0000 (09:20 -0500)]
nrf51: recognize hwid 0084

Chip markings: N51822 / QFACA1 / 1513AN

Change-Id: Idb7fc723850ea08b60b9f5c97a53f1ae8dfc8eb2
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Reviewed-on: http://openocd.zylin.com/2936
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agoKinetis: new devices K02, K26, K63, K64, K66, correct K21 and K22 variants
Tomas Vanek [Tue, 14 Jul 2015 20:10:55 +0000 (22:10 +0200)]
Kinetis: new devices K02, K26, K63, K64, K66, correct K21 and K22 variants

K22FN1M0 and K22FX512 has FTFE flash and old style SDID.
K22FN128, 256 and 512 has FTFA flash and new style SDID

K63 and K64 detects as K61 and K62, see Errata 1N83J e7534

Change-Id: I2aca6f1f18819bb2b2ec4982036510de444ad2ac
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/2867
Tested-by: jenkins
Reviewed-by: Thomas Schmid <thomas@rfranging.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Patrick Stewart <patstew@gmail.com>
9 years agoKinetis: give a reasonable default for max_flash_prog_size
Tomas Vanek [Thu, 24 Sep 2015 08:29:12 +0000 (10:29 +0200)]
Kinetis: give a reasonable default for max_flash_prog_size

max_flash_prog_size euals to pflash_sector_size_bytes for most of devices.
There is no point setting max_flash_prog_size for devices without
FS_PROGRAM_SECTOR capability.
Check for zero sector_size to avoid div by zero exception in case of
device has FlexNVM but the driver does not define nvm_sector_size_bytes

Change-Id: Iaf4e007fb1ec3d24c373350410e4bebe504a4c3e
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/2958
Tested-by: jenkins
Reviewed-by: Thomas Schmid <thomas@rfranging.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Patrick Stewart <patstew@gmail.com>
9 years agoKinetis: Add K24 support and tidy up
Patrick Stewart [Fri, 10 Jul 2015 13:01:35 +0000 (14:01 +0100)]
Kinetis: Add K24 support and tidy up

The K24 uses the KL-style SDID register and has some flashing quirks, so the kinetis driver does not support it properly.
Extend the chip detection routine to support the new SDID format. Add a parameter for the maximum flash size, as the K24 only supports 1k flashing blocks but has 4k sector size. Remove global 'granularity' array, as it's only really needed in one function. Replace 'klxx' with an enum showing which flash commands are actually supported on a given chip.

Signed-off-by: Patrick Stewart <patstew@gmail.com>
Change-Id: Ie244fab564d58c5cfe4fa36a025f0b2674ffad69
Reviewed-on: http://openocd.zylin.com/2864
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agoflash/nor/spi: Add Winbond w25q128fv
Alex Forencich [Thu, 3 Sep 2015 05:55:12 +0000 (22:55 -0700)]
flash/nor/spi: Add Winbond w25q128fv

Change-Id: I2e13c02361982468f41f218421ece9046bcc9a5f
Signed-off-by: Alex Forencich <alex@alexforencich.com>
Reviewed-on: http://openocd.zylin.com/2951
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agoADIv5: Fix typo in log message
Evan Hunter [Wed, 29 Jul 2015 12:29:41 +0000 (13:29 +0100)]
ADIv5: Fix typo in log message

Change-Id: I9c5e648566b1dd43cb55fd5e30edf8d5f0d189a6
Signed-off-by: Evan Hunter <ehunter@broadcom.com>
Reviewed-on: http://openocd.zylin.com/2892
Tested-by: jenkins
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agostlink_usb: fix typo
Jim Paris [Fri, 11 Sep 2015 17:00:54 +0000 (13:00 -0400)]
stlink_usb: fix typo

Change-Id: I3cf5ced568319878b8bf40743e4c07718f630c68
Signed-off-by: Jim Paris <jim@jtan.com>
Reviewed-on: http://openocd.zylin.com/2953
Tested-by: jenkins
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agoarmv7m: Fix memory leak in register caching.
Marc Schink [Tue, 30 Jun 2015 07:40:28 +0000 (09:40 +0200)]
armv7m: Fix memory leak in register caching.

Change-Id: I184042d277a52f3940d6d6c13f3d94afc557933d
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
[andreas.fritiofson@gmail.com: don't check pointers before free()]
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2881
Tested-by: jenkins
9 years agonumicro: Integrate Nuvoton NuMicro flash driver.
Nemui Trinomius [Wed, 3 Jun 2015 15:27:56 +0000 (00:27 +0900)]
numicro: Integrate Nuvoton NuMicro flash driver.

Flash driver "mini51.c" and "nuc1x.c" are same target MCU.
This patch integrates each driver and functions,
and makes into new "NuMicro" flash driver.

Change-Id: Ifff5c1cfdd265acca0f489631695be9194fa144c
Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-on: http://openocd.zylin.com/2794
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agoflash: Analog Devices ADuCM360 support
Ivan Buliev [Sat, 30 May 2015 12:26:28 +0000 (15:26 +0300)]
flash: Analog Devices ADuCM360 support

A target config and a simple flash driver for the ADuCM360 microcontroller.
The EEPROM of the chip may be erased and programmed.

Change-Id: Ic2bc2f91ec5b6f72e3976dbe18071f461fe503b8
Signed-off-by: Ivan Buliev <i.buliev@mikrosistemi.com>
Reviewed-on: http://openocd.zylin.com/2787
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: jenkins
9 years agotcl/board: Add Parallella-I board config
Andreas Färber [Thu, 23 Apr 2015 12:06:46 +0000 (14:06 +0200)]
tcl/board: Add Parallella-I board config

Tested with Porcupine-1 JTAG adapter board and Digilent JTAG-HS3 interface;
reset does not yet work, pending nSRST configuration of the interface used.

Change-Id: I0d0679e098d93ffbd1539004cdb900e2a8ae4a25
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2730
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agozynq_7000: Add expected ID
Andreas Färber [Thu, 23 Apr 2015 10:33:42 +0000 (12:33 +0200)]
zynq_7000: Add expected ID

As found on the Parallella-I board SKU A101020.

Change-Id: Ie7e7a36325926d67fbe555b46a9be8a74fac8dba
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2729
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agotcl/interface/ftdi: Add Digilent JTAG-HS3 config
Andreas Färber [Thu, 23 Apr 2015 10:30:39 +0000 (12:30 +0200)]
tcl/interface/ftdi: Add Digilent JTAG-HS3 config

Derived from tcl/interface/digilent-hs1.cfg.

JTAG-HS3 has an open drain buffer on pin 14 for SRST to work with
PS_SRST_B on Xilinx Zynq SoC.

Change-Id: I1e9e72d0511528a61207e318aff937ae9fad5bf9
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2728
Tested-by: jenkins
Reviewed-by: Robert Jordens <jordens@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agosvf: fix segfaults exposed by some SVF
Paul Fertser [Tue, 11 Aug 2015 22:03:02 +0000 (01:03 +0300)]
svf: fix segfaults exposed by some SVF

The problem was reported by jstefanop on IRC, the SVF was generated with
Xilinx ISE 14.7.

Found and investigated with Valgrind's vgdb service.

Change-Id: I32b0e77e0380ce4a391661f97449f9c2a5f83625
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2933
Tested-by: jenkins
9 years agotcl_server: Support line buffers up to 4M (v3)
Philipp Wagner [Tue, 23 Jun 2015 14:49:22 +0000 (16:49 +0200)]
tcl_server: Support line buffers up to 4M (v3)

Currently, the maximum size of a command sent to the TCL server is
4k. This patch increases this limit up to 4M.

Reasoning:
To get high-speed JTAG data transfers, I'm using a very long shift
register. This reduces the overhead of the state changes, as well as the
latency due to the common USB adapter transfers considerably. In order
to submit those long DRSCAN commands to OpenOCD over the TCL/TCL
interface, long TCL command lines are required. This is enabled by this
patch.

v3:
Address review comments. Drop line instead of connection when realloc()
fails.

Changes in v2 of this patch:
The line buffer is allocated dynamically to avoid an OpenOCD memory
overhead if the large buffers are not used. The buffer starts at 4K and
increases exponentially up to 1M, and then linearly in 1M increments up
to 4M.

Change-Id: Iecaef6a56ed5e18e9de4d912a514031ea78fa3bd
Signed-off-by: Philipp Wagner <philipp.wagner@tum.de>
Reviewed-on: http://openocd.zylin.com/2837
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
9 years agoserver: remove connection limit from tcl and telnet servers
Austin Morton [Thu, 13 Aug 2015 18:45:29 +0000 (14:45 -0400)]
server: remove connection limit from tcl and telnet servers

Add constant CONNECTION_LIMIT_UNLIMITED which indicates a service
has no connection limit

Change-Id: I008d31264010c25fa44ca74eb6d5740eca38bee1
Signed-off-by: Austin Morton <austinpmorton@gmail.com>
Reviewed-on: http://openocd.zylin.com/2937
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agoserver: tcl_trace command
Austin Morton [Mon, 9 Mar 2015 09:34:52 +0000 (05:34 -0400)]
server: tcl_trace command

Implements async target trace output to the tcl server

Change-Id: I0178f6404447337d523782a1d2c317457030da40
Signed-off-by: Austin Morton <austinpmorton@gmail.com>
Reviewed-on: http://openocd.zylin.com/2588
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agoflash/nor/jtagspi: 'retval' may be used uninitialized
Alamy Liu [Thu, 6 Aug 2015 21:45:19 +0000 (14:45 -0700)]
flash/nor/jtagspi: 'retval' may be used uninitialized

Problem
As my compiler has "warnings being treated as errors" on, it shows the
error message:
  error: 'retval' may be used uninitialized in this function

Investigation
Nothing wrong with the logic, 'retval' would have a value before returning.
Just wanna get rid of the compiling "warning as error" message.

Solution
Provide a reasonable default value

Change-Id: I712c15f82819c6c48bee9dceca8de4b18aeb29b0
Signed-off-by: Alamy Liu <alamy.liu@gmail.com>
Reviewed-on: http://openocd.zylin.com/2905
Tested-by: jenkins
Reviewed-by: Robert Jordens <jordens@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
9 years agosvf: flush the queue before reallocing memory
Paul Fertser [Thu, 30 Jul 2015 08:55:43 +0000 (11:55 +0300)]
svf: flush the queue before reallocing memory

During reallocation a new memory region might be allocated and the old
one freed. If jtag queue is holding a pointer to the old memory, it will
segfault during the execution. Avoid this by flushing the queue before a
reallocation attempt is made.

This should fix ticket #102.

Change-Id: I737fc3f1ebf6d76413a475beb8bf20184fe0233f
Reported-by: Alex Forencich <aforencich@users.sf.net>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2899
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
9 years agoflash : Add support for Atmel at91sam4sa16b
Evan Hunter [Fri, 17 Jul 2015 12:22:06 +0000 (13:22 +0100)]
flash : Add support for Atmel at91sam4sa16b

Change-Id: Ief6833b4bf587fbf53c8fbeee2fc276a95ca0a8a
Signed-off-by: Evan Hunter <ehunter@broadcom.com>
Reviewed-on: http://openocd.zylin.com/2878
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agogdb_server: Add check for malloc fail
Evan Hunter [Thu, 16 Jul 2015 16:44:17 +0000 (17:44 +0100)]
gdb_server: Add check for malloc fail

Change-Id: I623b30883042eae3253ed29de5c426da760dffa0
Signed-off-by: Evan Hunter <ehunter@broadcom.com>
Reviewed-on: http://openocd.zylin.com/2871
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agobcm2835gpio: Add SWD support, Raspberry Pi 2 support.
Christoph Pittracher [Thu, 4 Jun 2015 07:25:10 +0000 (09:25 +0200)]
bcm2835gpio: Add SWD support, Raspberry Pi 2 support.

Added support for SWD transport similar to sysfsgpio driver.
Added configurable peripheral base address to support Raspberry Pi 2.

Change-Id: If76d45fbe74ce49f1f22af72e5f246e973237e04
Signed-off-by: Christoph Pittracher <pitt@segfault.info>
Reviewed-on: http://openocd.zylin.com/2802
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agoat91samd: add chip IDs for SAMC20 and SAMC21 families
Andrey Yurovsky [Wed, 10 Jun 2015 16:53:27 +0000 (09:53 -0700)]
at91samd: add chip IDs for SAMC20 and SAMC21 families

Add the chip IDs corresponding to the new 5V "SAMC" parts which are
otherwise identical to the SAMD and should work with this driver.  Also
add the configurations for their Xplained Pro boards.

Change-Id: Ic268d4ac384a3a77d4211a94da9f9faf4d8c0f7b
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/2809
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agosim3x: fix build failure with clang 3.6
Paul Fertser [Fri, 26 Jun 2015 06:54:07 +0000 (09:54 +0300)]
sim3x: fix build failure with clang 3.6

This fixes a warning as reported by the current clang version:
../../../../src/flash/nor/sim3x.c:867:20: error: address of array
'sim3x_info->device_package' will always evaluate to 'true' .

Change-Id: Ie160cbe6df8f491e9beff38d47e2f13575529bf9
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2838
Tested-by: jenkins
Reviewed-by: Oleksij Rempel
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agokc705: digilent-jtag/kintex7/jtagspi board
Robert Jordens [Fri, 3 Jul 2015 05:38:53 +0000 (23:38 -0600)]
kc705: digilent-jtag/kintex7/jtagspi board

Xilinx Kintex7 Development board with integrated Digilent JTAG-SMT1
(a.k.a. HS1) interface and a 128 MBit SPI flash.

Change-Id: I9daba0a2fb2c17e04bcb37bd41872ebde25e0d2f
Signed-off-by: Robert Jordens <jordens@gmail.com>
Reviewed-on: http://openocd.zylin.com/2861
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agopipistrello: ftdi-jtag/spartan6/jtagspi board
Robert Jordens [Thu, 2 Jul 2015 05:29:34 +0000 (23:29 -0600)]
pipistrello: ftdi-jtag/spartan6/jtagspi board

The Pipistrello is a low cost FPGA board with a Xilinx
Spartan6 LX45, a SPI flash and onboard FTDI JTAG.
This board is a good example use case for the jtagspi
flash driver talking through a proxy bitstream.

Change-Id: I04a80610ff825c36ebcb67b879507028eed141ad
Signed-off-by: Robert Jordens <jordens@gmail.com>
Reviewed-on: http://openocd.zylin.com/2846
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agoflash/nor/jtagspi: add JTAGSPI driver
Robert Jordens [Wed, 1 Jul 2015 09:18:46 +0000 (03:18 -0600)]
flash/nor/jtagspi: add JTAGSPI driver

Many FPGA board speak JTAG and have a SPI flash for their bitstream
attached to them. The SPI flash is programmed by first uploading a
proxy bitstream to the FPGA that connects the JTAG interface to the
SPI interface if the IR contains a certain USER instruction. Then the
SPI flash can be erase, written, read directly through the JTAG DR.

The JTAG and SPI signaling is compatible. Such a proxy bitstream only
needs to connect TDO-MISO, TDI-MOSI, TCK-CLK, and the activate the
chip select when the IR contains the special instruction and the JTAG
state machine is in the DR-SHIFT state.

Change-Id: Ibc21d793a83b36fa37e2704966aa5c837c4dd0d2
Signed-off-by: Robert Jordens <jordens@gmail.com>
Reviewed-on: http://openocd.zylin.com/2844
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agoflash/nor/tcl: add read_bank and verify_bank
Robert Jordens [Wed, 1 Jul 2015 08:55:49 +0000 (02:55 -0600)]
flash/nor/tcl: add read_bank and verify_bank

The only read access to flash chips so is through the target's
memory. Flashes like jtagspi do not expose a memory mapped interface
to the flash. These commands use the flash_driver_read() driver API
directly.

Change-Id: I40b910de650114a3f676507f9f059a234377d862
Signed-off-by: Robert Jordens <jordens@gmail.com>
Reviewed-on: http://openocd.zylin.com/2842
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agocpld/virtex2: allow JSTART to be disabled
Robert Jordens [Fri, 3 Jul 2015 05:15:53 +0000 (23:15 -0600)]
cpld/virtex2: allow JSTART to be disabled

This adds an option to disable the use of the JSTART instruction
when loading bitstreams to xilinx fpgas. JSTART apparently prevents
configuration if the startup clock is not set to the jtag clock in
the bitstream.

xc3sprog is omitting JSTART for all devices. Problems with loading a bitstream
that does not have StartupClk:JTAGClk are described here:
http://www.xilinx.com/support/answers/56151.html

Change-Id: I8137c0bae05a8c3c6f8e2611869f70a770d1651d
Signed-off-by: Robert Jordens <jordens@gmail.com>
Reviewed-on: http://openocd.zylin.com/2860
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agoflash/nor/spi: add micron/numonyx n25q128
Robert Jordens [Wed, 1 Jul 2015 02:53:11 +0000 (20:53 -0600)]
flash/nor/spi: add micron/numonyx n25q128

http://www.micron.com/products/nor-flash/serial-nor-flash
https://www.micron.com/~/media/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_128mb_3v_65nm.pdf
Signed-off-by: Robert Jordens <jordens@gmail.com>
Change-Id: Icfb830387fabfb1a67e4d00bdf21a10420f6fc1c
Signed-off-by: Robert Jordens <jordens@gmail.com>
Reviewed-on: http://openocd.zylin.com/2841
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agotarget/testee: manage target->state
Robert Jordens [Tue, 30 Jun 2015 23:16:08 +0000 (17:16 -0600)]
target/testee: manage target->state

The testee target is usefull for certain non-cpu pass-through
situations, for example in the case of a spi flash mapped to the DR of
a JTAG tap, as is the case for most FPGAs with SPI flashs behind them.

We just manage the RUNNING/RESET/HALTED state in the testee driver to
support it being halted which is a requirement for flash banks.

Change-Id: I1b4d52c58a1f6bd753e126bfde74dcc5164d7b69
Signed-off-by: Robert Jordens <jordens@gmail.com>
Reviewed-on: http://openocd.zylin.com/2840
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agotcl/board: Add EmCraft VF6 SOM and baseboard configs
Andreas Färber [Thu, 14 May 2015 20:37:25 +0000 (22:37 +0200)]
tcl/board: Add EmCraft VF6 SOM and baseboard configs

Tested with "TWR-K70-SOM-BSB-1A" baseboard.

Change-Id: I37aa21f1ca8aa13a4bf03be7dd534d6da1aec017
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2767
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agotcl/target: Add Freescale Vybrid VF6xx config
Andreas Färber [Thu, 14 May 2015 20:02:00 +0000 (22:02 +0200)]
tcl/target: Add Freescale Vybrid VF6xx config

This covers only the Cortex-A5 for now, not the Cortex-M4.

Change-Id: I739ec52b14b83d6e9f124ed61f8941502e481402
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2766
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agojlink: Add on-board nRF51-DK USB VID and PID
Kyle Manna [Sun, 17 May 2015 18:11:26 +0000 (11:11 -0700)]
jlink: Add on-board nRF51-DK USB VID and PID

* Add USB VID and PID for the J-Link interface running on the Nordic
  Semiconductor nRF51-DK.  Also tested with debug out port to debug
  external boards.
* Elimiantes need for `-c "jlink pid 0x1015"` on the openocd cmd line.

Change-Id: Ib23acb72b9f5183b76fc7dc22b556982869ae830
Signed-off-by: Kyle Manna <kyle@kylemanna.com>
Reviewed-on: http://openocd.zylin.com/2775
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agoudev: Add J-Link on-board nRF51-DK
Kyle Manna [Sun, 17 May 2015 18:11:15 +0000 (11:11 -0700)]
udev: Add J-Link on-board nRF51-DK

* Add USB VID and PID for the J-Link interface running on the Nordic
  Semiconductor nRF51-DK.  Also tested with debug out port to debug
  external boards.
* Fixes permissions problems.

Change-Id: I01ffc3150fa2af92d399b50e0195dc255a40ec42
Signed-off-by: Kyle Manna <kyle@kylemanna.com>
Reviewed-on: http://openocd.zylin.com/2774
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agotcl: replace $TARGETNAME with $_TARGETNAME
Radek Dostal [Thu, 21 May 2015 16:12:39 +0000 (18:12 +0200)]
tcl: replace $TARGETNAME with $_TARGETNAME

code polishing to be consistent with other scripts

Change-Id: Ib52a92f48df9d2bdf543792b856e33aa04dbebe3
Signed-off-by: Radek Dostal <radek.dostal@streamunlimited.com>
Reviewed-on: http://openocd.zylin.com/2779
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agoRTOS: ThreadX support on ARM926E-JS
Alexander Drozdov [Thu, 2 Jul 2015 08:32:28 +0000 (18:32 +1000)]
RTOS: ThreadX support on ARM926E-JS

ThreadX uses two stacking schemas on ARM926E-JS, extend API to use more then
one stecking at time.

Change-Id: I92d445ad0981b6409ea4c4e7e438d3a7ae39cbe7
Signed-off-by: Alexander Drozdov <adrozdoff@gmail.com>
Reviewed-on: http://openocd.zylin.com/2848
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agotarget: check memory handlers before use for all types
Karl Palsson [Sun, 31 May 2015 13:36:13 +0000 (13:36 +0000)]
target: check memory handlers before use for all types

MMU types were checking and installing fakes at init, but this wasn't catching
all devices.  Fixes segfaults when attempting mdw and friends on avr.

Change-Id: I5b11f9913157a21f1aeb11ec852f593b529d9be8
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/2791
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Andreas Färber <afaerber@suse.de>
9 years agomanual: make it compatible with ancient texinfo versions that lack @raggedright
Paul Fertser [Mon, 25 May 2015 08:59:25 +0000 (11:59 +0300)]
manual: make it compatible with ancient texinfo versions that lack @raggedright

This is needed to unbreak build on systems that ship texinfo version
4.x.

Change-Id: Ie665d29b02bb65da7e8ed0d48d17fa56e231bd0d
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2781
Tested-by: jenkins
Reviewed-by: David Ung <davidu@nvidia.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Oleksij Rempel
9 years agoRestore normal development cycle
Paul Fertser [Sun, 17 May 2015 21:34:18 +0000 (00:34 +0300)]
Restore normal development cycle

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
9 years agoThe openocd-0.9.0 release v0.9.0
Paul Fertser [Sun, 17 May 2015 21:06:36 +0000 (00:06 +0300)]
The openocd-0.9.0 release

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
9 years agoNEWS: last pre-release changes
Paul Fertser [Sun, 17 May 2015 20:27:24 +0000 (23:27 +0300)]
NEWS: last pre-release changes

Change-Id: Ibeb9078d19023b8cae5c0371079d5e4e1b5e3c57
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2776
Tested-by: jenkins
9 years agojtag/drivers/stlink: fix SRST issue with stlink-v1
Paul Fertser [Sun, 10 May 2015 10:12:14 +0000 (13:12 +0300)]
jtag/drivers/stlink: fix SRST issue with stlink-v1

Even though the latest firmware version for stlink-v1 supports "v2"
JTAG API, the hardware SRST handling is still broken; amend the check
accordingly.

Change-Id: I62c662cd7aa209d2d6e9fe260f5c0be81d0ce672
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2761
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agopsoc4: add support for Cypress CCG1 family
Vincent Palatin [Tue, 18 Nov 2014 20:04:23 +0000 (12:04 -0800)]
psoc4: add support for Cypress CCG1 family

Add the identifiers to support the flash on the Cypress Type-C Port Controller
chips of the CCG1 family : http://www.cypress.com/ccg1/.

Tested successfully on CYPD1132-16SXI.

Change-Id: I3fe6283379e5bcab964afac31b547ef95535aa2c
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-on: http://openocd.zylin.com/2757
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agonrf51: refine and extend known devices table
Peter A. Bigot [Tue, 10 Mar 2015 13:44:28 +0000 (08:44 -0500)]
nrf51: refine and extend known devices table

The notation Gx0 in the nRF51 Series Compatibility Matrix indicates that
the specified HWID is valid only for build code 0 of each chip, and for
subsequent builds the HWID will be different.  Replace the Gx0 notation
with G0 throughout, and add the missing HWID for nRF51422 QFAC A1
(present on the newer nRF51 developer boards).

See: https://www.nordicsemi.com/eng/nordic/download_resource/41917/5/55913589
See: https://devzone.nordicsemi.com/question/30774/mapping-hwid-to-revision-information/

Change-Id: I79d842137d41342db35904867c48b06fbc6fbc70
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Angus Gratton <gus@projectgus.com>
Reviewed-on: http://openocd.zylin.com/2593
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agodocs: gdb_target_description defaults enabled
Karl Palsson [Wed, 13 May 2015 11:33:59 +0000 (11:33 +0000)]
docs: gdb_target_description defaults enabled

This has been the case since c6216201 in 2013

Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Change-Id: I70232a46e29951f05f02dec00e0695d761697aa5
Reviewed-on: http://openocd.zylin.com/2764
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agoserver: avoid the tcl server crashing when there is no target
Austin Morton [Sat, 2 May 2015 22:00:37 +0000 (18:00 -0400)]
server: avoid the tcl server crashing when there is no target

Since commit 1d0cf0df37a4e831ca3121ba8987d5848cad3e42
("server: tcl_notifications command") connecting to the tcl server
would terminate openocd. Fix this.

Change-Id: I36e2a7482f7db3a30ff7e9f969c3b6cda9599382
Signed-off-by: Austin Morton <austinpmorton@gmail.com>
Reviewed-on: http://openocd.zylin.com/2759
Tested-by: jenkins
Reviewed-by: Forest Crossman <cyrozap@gmail.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agomanual: add missing usb blaster commands
Paul Fertser [Sat, 16 May 2015 08:10:31 +0000 (11:10 +0300)]
manual: add missing usb blaster commands

Change-Id: Ie7fbb9f87a811c4add5b7c8f9581d5bbc90fa4f8
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2772
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
9 years agomanual: fix usb_blaster_pin command syntax and description
Paul Fertser [Sat, 16 May 2015 07:18:19 +0000 (10:18 +0300)]
manual: fix usb_blaster_pin command syntax and description

Change-Id: If3fbb2fe4f1842bea3962a6b903fd16aa9e8b545
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2771
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
9 years agoREADME.Windows: clarify the kernel drivers installation
Paul Fertser [Tue, 27 Jan 2015 10:37:51 +0000 (13:37 +0300)]
README.Windows: clarify the kernel drivers installation

HID and composite devices need to be mentioned explicitly due to
windows oddities.

Change-Id: I7cdbaa50c60ceb1950c934e0249986d46c875cff
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2506
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
9 years agomanual: reorder flash driver info
Paul Fertser [Fri, 15 May 2015 10:19:09 +0000 (13:19 +0300)]
manual: reorder flash driver info

Put all the individual driver descriptions to where they really
belong, fix sectioning etc.

Change-Id: I94dc09e9a296ec57db4475f8dfb0a7d62a754aa4
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2770
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
9 years agomanual: fix all overfull and underfull hboxes
Paul Fertser [Fri, 15 May 2015 10:16:12 +0000 (13:16 +0300)]
manual: fix all overfull and underfull hboxes

Change-Id: Id84f16de5a3d1907e196d13007a312593bb6670a
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2769
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
9 years agomanual: remove the lists of config files
Paul Fertser [Fri, 15 May 2015 10:13:18 +0000 (13:13 +0300)]
manual: remove the lists of config files

Directory listings are volatile and serve no purpose in the
manual. Just remove them.

Change-Id: I63d54ba209c29eafb6608cf406b8ce5d8e9ee6c8
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2768
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
9 years agoRestore -dev suffix
Paul Fertser [Fri, 24 Apr 2015 15:56:30 +0000 (18:56 +0300)]
Restore -dev suffix

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
9 years agoThe openocd-0.9.0-rc1 release candidate v0.9.0-rc1
Paul Fertser [Fri, 24 Apr 2015 15:12:24 +0000 (18:12 +0300)]
The openocd-0.9.0-rc1 release candidate

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
9 years agoAdd NEWS in preparation for the new release
Paul Fertser [Thu, 9 Apr 2015 07:55:49 +0000 (10:55 +0300)]
Add NEWS in preparation for the new release

Change-Id: I629158b59ff38f9b82a560f119a391bb97af43f2
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2701
Tested-by: jenkins
9 years agojtag/drivers/ti_icdi: do not segfault when adapter can't be opened
Paul Fertser [Fri, 24 Apr 2015 14:09:14 +0000 (17:09 +0300)]
jtag/drivers/ti_icdi: do not segfault when adapter can't be opened

Change-Id: Id3af8dfd18b13947bca4f3c89c2516ccbcef60b6
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2742
Tested-by: jenkins
9 years agoxmc4500-application-kit-general: Drop srst_nogate
Andreas Färber [Thu, 23 Apr 2015 11:14:35 +0000 (13:14 +0200)]
xmc4500-application-kit-general: Drop srst_nogate

Reset stopped working with this setting.

Change-Id: I98e8fafa48e0ab65dce8110870be422edf7b2fdb
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2727
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agotarget/ti_tms570.cfg: added several JTAG IDs for TMS570LS family
Jiri Kastner [Fri, 2 May 2014 12:55:36 +0000 (14:55 +0200)]
target/ti_tms570.cfg: added several JTAG IDs for TMS570LS family

from TI datasheets for whole cortex-r4 family added JTAG IDs

TMS570LS1227 16- and 32-Bit RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/spns192
0x0B95502F

16/32-Bit RISC Flash Microcontroller, TMS5703137-EP (Rev. B)
http://www.ti.com/lit/pdf/spns230
0x0D8A002F
0x2D8A002F
0x3D8A002F

RM48L952 16- and 32-Bit RISC Flash Microcontroller (Rev. B)
http://www.ti.com/lit/pdf/spns177
0x0D8A002F
0x2D8A002F
0x3D8A002F

RM46L852 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/spns185
0x0B95502F

RM48Lx30 16- and 32-Bit RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/spns176
0x0B8A002F
0x2B8A002F
0x3B8A002F

RM46Lx30 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/spns182
0x0B95502F

RM46Lx50 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/spns184
0x0B95502F

TMS570LS04x/03x 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/spns186
0x0B97102F

RM42L432 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/spns180
0x0B97102F

RM46Lx40 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/
0x0B95502F

TMS570LS12x5 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/spns191
0x0B95502F

RM48Lx40 16- and 32-Bit RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/spns175
0x0B8A002F
0x2B8A002F
0x3B8A002F

TMS570LS31x4/21x4 16- and 32-Bit RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/spns165
0x0B8A002F
0x2B8A002F
0x3B8A002F

TMS570LS20216/20206/10216/10206/10116/10106 16/32-Bit RISC Flash Microcontroller (Rev. F)
http://www.ti.com/lit/pdf/spns141
0x0B7B302F

TMS570LS31x5/21x5 16- and 32-Bit RISC Flash Microcontroller (Rev. B)
http://www.ti.com/lit/pdf/spns164
0x0B8A002F
0x2B8A002F
0x3B8A002F

RM48Lx50 16- and 32-Bit RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/spns174
0x0B8A002F
0x2B8A002F
0x3B8A002F

TMS570LS3137 16- and 32-Bit RISC Flash Microcontroller (Rev. B)
http://www.ti.com/lit/pdf/spns162
0x0B8A002F
0x2B8A002F
0x3B8A002F

TMS570LS12x4 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/spns190
0x0B95502F

TMS570LS1115 16- and 32-Bit RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/spns189
0x0B95502F

TMS570LS11x4 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
http://www.ti.com/lit/pdf/spns188
0x0B95502F

Change-Id: Idf53a44851e1bb4bde4a74c64b65d4411e56da7c
Signed-off-by: Jiri Kastner <cz172638@gmail.com>
Tested-by: Jiri Kastner <cz172638@gmail.com>
Reviewed-on: http://openocd.zylin.com/2123
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agoTI TMS570 USB Kit board config
Alex Ray [Fri, 4 Apr 2014 06:14:37 +0000 (23:14 -0700)]
TI TMS570 USB Kit board config

Split TMS570 target into LS31/LS21 and LS20/LS10 targets.
Board for the TMS570LS20SUSB Kit, which uses the TMS570 Cortex-R4 MCU from TI.
Tested attaching.

Change-Id: I1a69ac1ed800d0d6b7f9860c19cbd149e3e47620
Signed-off-by: Alex Ray <a@machinaut.com>
Reviewed-on: http://openocd.zylin.com/2089
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agortos/mqx: prevent crash with -rtos auto
Paul Fertser [Fri, 24 Apr 2015 11:43:45 +0000 (14:43 +0300)]
rtos/mqx: prevent crash with -rtos auto

Since mqx comes last in the list, with the auto option its
update_threads is called even though it wasn't detected.

This check should be removed from all the rtos helpers and moved to
the generic code, but better do it later all in one go.

Change-Id: If24ab42a58a468d90e9f12028d4c2fb76a9bc2e8
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2741
Tested-by: jenkins
9 years agotarget/cortex_a: examination should be done every time it's asked for
Paul Fertser [Sun, 19 Apr 2015 21:29:37 +0000 (00:29 +0300)]
target/cortex_a: examination should be done every time it's asked for

It was observed on AM437x that after every reset the target's debug
regions are unpowered. To be able to properly communicate with the
target and perform cortex_a init debug access after a reset event the
examination need to be performed every time, not just on OpenOCD
start.

Change-Id: Idf272e127ee88341e806ee00df154eade573451d
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2723
Tested-by: jenkins
Reviewed-by: Felipe Balbi <balbi@ti.com>
9 years agotarget: try to reexamine even when polling fails
Paul Fertser [Fri, 17 Apr 2015 10:36:28 +0000 (13:36 +0300)]
target: try to reexamine even when polling fails

After intermittent connection failures or target power failures it
might be necessary to try reexamination even when polling fails. This
should make communication with Cortex-A targets more reliable.

This was runtime tested with stlink attached to an stm32l1 and an FTDI JTAG
adapter attached to an stm32f1 target.

Change-Id: I38c4db8124b7f4bbf53ddda53c13273449f49c15
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2721
Tested-by: jenkins
Reviewed-by: Felipe Balbi <balbi@ti.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Andreas Färber <afaerber@suse.de>
9 years agortos: fix print format specifiers
Paul Fertser [Mon, 20 Apr 2015 09:02:48 +0000 (12:02 +0300)]
rtos: fix print format specifiers

Exposed by arm-none-eabi build.

Change-Id: I657c642249aa83403f93132d1e28713aee692c30
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2724
Tested-by: jenkins
9 years agoconfigure the SWD frequency when setting adapter speed in SWD mode for versaloon
Simon Qian [Mon, 16 Mar 2015 16:11:09 +0000 (00:11 +0800)]
configure the SWD frequency when setting adapter speed in SWD mode for versaloon

Change-Id: I99cdc11ba1442e4c9efaa0f1de8e7089ec725e14
Signed-off-by: Simon Qian <openocd@versaloon.com>
Reviewed-on: http://openocd.zylin.com/2608
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agoflash: at91samd: add SAML21 support, fix part ID issue
Andrey Yurovsky [Mon, 30 Mar 2015 19:50:13 +0000 (12:50 -0700)]
flash: at91samd: add SAML21 support, fix part ID issue

This adds support for the new Atmel SAML21 family of low-power Cortex
M0+ devices.  Their Flash controller is essentially the SAMDxx one so
the change consists of adding the new part IDs.  Unfortunately the
device ID logic had a couple of mistakes in it that did not affect
anything on SAMD2x devices (due to 0 values expected there) but that is
a problem on L21, it's therefore addressed here and things should now
match the datasheets.

Tested on Amtel SAML21 Xplained Pro development kit against the included
SAML21J18A there.  Also tested for regressions on a SAMD20 and SAMD21
using their dev kits.

Change-Id: I768f75e064b8656c15148730dacaa4c3acfc4101
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/2690
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agostlink_usb.c: Decode some more errors.
Uwe Bonnes [Thu, 9 Apr 2015 13:55:17 +0000 (15:55 +0200)]
stlink_usb.c: Decode some more errors.

Change-Id: I637cb63bd39120554aa184eaa48fd00a4852359f
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2706
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agoflash/nor/mdr: add docs, remove memory leak on probe()
Paul Fertser [Sat, 4 Apr 2015 08:08:15 +0000 (11:08 +0300)]
flash/nor/mdr: add docs, remove memory leak on probe()

This adds the mandatory Info documentation for the driver as well as
the usage field.

As a clean up, this also includes freeing of the allocated memory
which results in a memory leak if probe is invoked multiple times.

Valgrind-tested.

Reported by Dmitry Shpak.

Change-Id: I2b1d9b9e8b069c6665b11d880b40ce19a1b26ce6
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2694
Tested-by: jenkins
Reviewed-by: Дмитрий Шпак <disona@yandex.ru>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agoflash: efm32: Add support for EZR32LG and EZR32WG.
Marc Schink [Wed, 8 Apr 2015 08:55:22 +0000 (10:55 +0200)]
flash: efm32: Add support for EZR32LG and EZR32WG.

This patch was tested with an EZR32WG Starter Kit.

Change-Id: I0f7c619e715fe30e88e6da3bead0806dd3bce819
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/2700
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
9 years agodocs: update OpenOCD url's to openocd.org domain
Spencer Oliver [Tue, 7 Apr 2015 08:40:53 +0000 (09:40 +0100)]
docs: update OpenOCD url's to openocd.org domain

Change-Id: I8b55c8d12773a1c36f2fd2afeecf20a74e890064
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2698
Tested-by: jenkins
9 years agocmsis-dap: print vendor and product id on open failure
Spencer Oliver [Fri, 10 Apr 2015 10:46:22 +0000 (11:46 +0100)]
cmsis-dap: print vendor and product id on open failure

Change-Id: Iae7ed8d59a722b805536550a8033f5fb7c85c5fc
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2708
Tested-by: jenkins
Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
9 years agodoc/openocd.texi: fix formatting for mrvlqspi driver documentation
Mahavir Jain [Thu, 9 Apr 2015 13:14:05 +0000 (18:44 +0530)]
doc/openocd.texi: fix formatting for mrvlqspi driver documentation

* also included example for flash usage information

Change-Id: Icf9defc25d38bf24567b1708138b83a8de1e0497
Signed-off-by: Mahavir Jain <mjain@marvell.com>
Reviewed-on: http://openocd.zylin.com/2705
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agotcl/target/stm32f3: fix reset init for stlink
Paul Fertser [Thu, 9 Apr 2015 12:20:22 +0000 (15:20 +0300)]
tcl/target/stm32f3: fix reset init for stlink

Use mmw to manipulate only selected bits of the word. msb and mwb verify the
memory location and may error on PLLRDY set as a result of PLLON written.

Change-Id: I9a4c1e58f002a1e5e99be1bd34aac27ba65d111d
Reported-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2702
Tested-by: jenkins
9 years agocontrib/itmdump: add a hack to allow direct dumping of specific SWIT, fix timestamp
Paul Fertser [Mon, 9 Feb 2015 13:51:33 +0000 (16:51 +0300)]
contrib/itmdump: add a hack to allow direct dumping of specific SWIT, fix timestamp

Currently itmdump is not a production-quality code hence this hack
seems to be appropriate.

More robust handling is possible with libswo-based swodec tool that's
available from http://git.zapb.de/ .

This adds a new command line option -d N where N is a stimulus number
you want to dump (counting from 1).

The idea here is that if you're interested to live-monitor just a
single stimulus port, you can use this utility directly. If one wants
to demultiplex the TPIU stream, the following is proposed:

1. Use https://gitorious.org/multiplex/multiplex utility that can
accept binary data from a file/pipe/stdin and arbitrary number of TCP
connections. It simply mirrors all the incoming data to all the
accepted connections;

2. Use socat to connect itmdump to the proxy mentioned in 1. and then
either dump the results to separate files or share via their dedicated
TCP ports.

Example script (inspired by http://openocd.zylin.com/#/c/1662/ ,
enables and disables specific itm ports on demand):

for i in `seq 0 31`; do
  while true; do
    socat -U TCP-LISTEN:$((8000+$i)),reuseaddr \
             SYSTEM:"echo itm port $i on | nc -q0 localhost 4444 > /dev/null; nc localhost 7777 | stdbuf -oL itmdump -d$((i+1))"
    echo itm port $i off | nc -q0 localhost 4444 > /dev/null
  done < /dev/null >&0 2>&0 &
done

Change-Id: Iaeb102436eaa5b106002083f2ffe758fb7bd83e5
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2537
Tested-by: jenkins
9 years agoFix several format specifiers errors exposed by arm-none-eabi
Paul Fertser [Sun, 15 Mar 2015 07:18:55 +0000 (10:18 +0300)]
Fix several format specifiers errors exposed by arm-none-eabi

Change-Id: I1fe5c5c0b22cc23deedcf13ad5183c957551a1b7
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2719
Tested-by: jenkins
9 years agoboard: ti_am43xx_evm: remove xds100v2 interface
Felipe Balbi [Wed, 18 Mar 2015 18:12:48 +0000 (13:12 -0500)]
board: ti_am43xx_evm: remove xds100v2 interface

GP and EPOS EVMs do not provide xds100v2 on board,
rather they have a pin header which can be used
to attach any debug pod the user might want.

Change-Id: I61678c50900fbe0fab500ea42f85ecde7a490ded
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2618
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agortos: add instructions and helper code to make FreeRTOS work again
Andreas Fritiofson [Thu, 16 Apr 2015 11:08:14 +0000 (13:08 +0200)]
rtos: add instructions and helper code to make FreeRTOS work again

Run-time tested with FreeRTOS V8.1.2 (current version).

For the time being I propose this way of dealing with RTOSes that do
not export necessary information on their own.

I also suggest implementing a similar scheme for ChibiOS, exporting
the necessary struct fields' offsets via an OpenOCD-specific helper.

Change-Id: Iacf8b88004d62206215fe80011fd7592438446a3
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2347
Tested-by: jenkins
9 years agoFreeRTOS: Make optional symbols optional
Andreas Fritiofson [Thu, 16 Apr 2015 08:56:47 +0000 (10:56 +0200)]
FreeRTOS: Make optional symbols optional

xSuspendedTaskList and xTasksWaitingTermination are only available for
some configurations. Missing optional symbols will have their addresses
remaining at zero so the corresponding lists will be skipped when
building the task list.

Change-Id: If330f5038d009298c3a14a4d2756db7105a30bc8
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2425
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agoAT91SAM4L: handle reset run/halt in SMAP
Tomas Vanek [Sat, 14 Mar 2015 11:03:47 +0000 (12:03 +0100)]
AT91SAM4L: handle reset run/halt in SMAP

This is a remake of http://openocd.zylin.com/1966
originally written by Angus Gratton <gus@projectgus.com>

ATSAM4L has a "System Manager Access Port" (SMAP) that holds the CPU
in reset if TCK is low when srst (RESET_N) is deasserted.
Without this change any use of sysresetreq or srst locks the chip
in reset state until power is cycled.

A new function smap_reset_deassert is called as reset-deassert-post event handler.
It optionally prepares reset vector catch and SMAP reset is released then.

Change-Id: Iad736357b0f551725befa2b9e00f3bc54504f3d8
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/2604
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
9 years agotarget/arm_adi_v5, cortex_m: retry ahbap_debugport_init few times in case of an error
Paul Fertser [Fri, 13 Mar 2015 14:55:51 +0000 (17:55 +0300)]
target/arm_adi_v5, cortex_m: retry ahbap_debugport_init few times in case of an error

Some targets need arbitrary amount of time (usually not too long)
after reset (both sysresetreq and srst) to do initialisation, and
SWD/JTAG is not available during that. According to PSoC4 docs, the
debugger should try connecting until it succeeds.

Also ahbap_debugport_init might be necessary to perform after using
hardware srst too, so add it there (except for the targets that
support srst_nogate since they are very unlikely to need it).

Change-Id: I3598d5ff7b8e0bf3a5566a57dec4b0b2b243d297
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2601
Tested-by: jenkins
9 years agotarget/cortex_a: emit a clear error message when dbgbase can't be detected
Paul Fertser [Sat, 14 Mar 2015 05:15:12 +0000 (08:15 +0300)]
target/cortex_a: emit a clear error message when dbgbase can't be detected

In some cases (the most obvious are TI's SoCs) ROM table lacks entries
for the cores, so OpenOCD has no way to determine what debug base to
use. Due to an error fixed in ec9ccaa28849 it wasn't handled properly,
and OpenOCD would continue to try using dbgbase = 0, which happened to
work for e.g. AM437x.

This patch adds a clear indication to the user that to access such a
target, dbgbase must be set manually in the config.

Reported by Felipe Balbi on IRC.

Change-Id: Id8533e708f44b76550eb8b659564f5f45717c298
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2603
Tested-by: jenkins
9 years agoflash/nor/lpc2000: free allocated working area when target_write fails
Paul Fertser [Sat, 4 Apr 2015 21:16:59 +0000 (00:16 +0300)]
flash/nor/lpc2000: free allocated working area when target_write fails

In some circumstances (e.g. inappropriate jtag clock)
target_write_memory in lpc2000_iap_working_area_init might fail. The
allocated working area should be freed inside
lpc2000_iap_working_area_init in this error case.

This was leading to a weird segfault due to stack corruption later
when reset was executed.

Reported by quitte (Jonas Meyer).

Change-Id: Ia2ed42a9970a4d771727fd516a6eea88e9b859e2
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2696
Tested-by: jenkins
9 years agojtag/adi_v5_jtag: fix infinite recursion in jtagdp_transaction_endcheck()
Paul Fertser [Mon, 6 Apr 2015 13:04:05 +0000 (16:04 +0300)]
jtag/adi_v5_jtag: fix infinite recursion in jtagdp_transaction_endcheck()

Calling ahbap_debugport_init() is wrong here because the actions
performed by it might lead to jtagdp_transaction_endcheck errors thus
leading to infinite recursion.

The removed code is not needed now because target polling should lead
to reexamination automatically, and both cortex_a and cortex_m call
ahbap_debugport_init() as part of their target examine handler.

This was reported as a real life issue on IRC by Weaselweb with
Cortex-A target. Quitte reports similar results in some circumstances
(adapter_khz too high) with LPC17xx.

Change-Id: I7148022f76a1272b5262d251f2e807ffb1543547
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2697
Tested-by: jenkins
9 years agoflash/nor/lpc2000: properly free working area used in get_lpc2000_part_id()
Paul Fertser [Sat, 4 Apr 2015 17:50:37 +0000 (20:50 +0300)]
flash/nor/lpc2000: properly free working area used in get_lpc2000_part_id()

The IAP working area needs to be freed here, just like in all the
other driver functions since an automatic local variable is used to
store a pointer to it.

This was reported by quitte (Jonas Meyer) on IRC as a strange totally
unrelated segfault after doing certain operations (leading to target
reset) from GDB. He has provided me with remote access to the specific
machine and configuration that exposed the issue, and after some
debugging it became apparent that a auto local variable (holding the
gdb connection pointer) gets overwritten somehow. Placing an
appropriate breakpoint just before the event and using a watchpoint
made the cause apparent: reset lead to freeing of all working areas,
and there was one holding a pointer to a variable that was auto local
in get_lpc2000_part_id().

Change-Id: I7e634d890135ca0f3b4b311e09e8385a03982bd6
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2695
Tested-by: jenkins
9 years agojtag/startup.tcl: fix regression with autoselecting JTAG
Paul Fertser [Fri, 3 Apr 2015 04:55:50 +0000 (07:55 +0300)]
jtag/startup.tcl: fix regression with autoselecting JTAG

This regression was introduced with d90b86d8. "transport select" doesn't
throw an error anymore and autoselects the first available transport on
its own.

Reported by moyix on IRC.

Change-Id: I3f303c0372e915931cca4b28af450694abc1a63e
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2693
Tested-by: jenkins