Oliver Schmidt [Fri, 7 Jun 2013 21:13:46 +0000 (23:13 +0200)]
Added support for 'prefix'.
If the variable 'prefix' is defined then the builtin search paths are set to
$(prefix)/lib/cc65/... allowing to build binaries intended for installation.
Note that the library build still works with these binaries as it generally
overrides the builtin search paths by setting the CC65_HOME env var.
Oliver Schmidt [Tue, 4 Jun 2013 21:39:00 +0000 (23:39 +0200)]
Use unique variables for cc65 toolchain.
Originally I used the usual variables (like $(CC) and $(CFLAGS) ) but after
all this doesn't make sense as any predefined values and/or user defined
settings can only be wrong.
Oliver Schmidt [Fri, 31 May 2013 22:11:31 +0000 (00:11 +0200)]
Added library reference em_libref to EMD interface.
Occasionally dynamically drivers suffer from not being to refer to
content in the C library. Therefore I added a mechanism to allow
a C library for a certian target to define a symbol that will be
handed over to dynamic drivers for that target. Then the drivers
can use their refernce to that symbol to access content in the C
library.
Oliver Schmidt [Fri, 31 May 2013 19:30:14 +0000 (21:30 +0200)]
Explicitly set search paths for libraries build.
The libraries build is prepared to work with binaries not part of the current
working tree. But in this case the default search path surely points to some
other working tree. Even the binaries in this working tree might have been
compiled with non-standard builtin search paths.
Anyway when building the libraries we want always to use the headers from
the current working tree. Therefore we want to set them explicitly. Instead
of setting all in all five paths on the command lines of ca65, cc65 and ld65 I
opted to just set the single environment variable.
Oliver Schmidt [Tue, 28 May 2013 20:07:04 +0000 (22:07 +0200)]
Brought back mouse driver source code.
The mouse driver source code in question was removed two years
ago with commit 6cbbe66c87fc19c322a0dd72a5c8ef094ea90c90.
It seems however desirable to have it around visible in the source
code tree for reference purposes.
Oliver Schmidt [Tue, 28 May 2013 19:56:37 +0000 (21:56 +0200)]
Introduced target 'atarixl'.
The target 'atarixl' is to be used for Atari XL (and better) machines.
It will disable the OS ROM and enable the Shadow RAM available on
those machine.
Note: This commit is only the inital step towards for this goal that just
replicates the target 'atari' as a starting point!
Oliver Schmidt [Tue, 28 May 2013 19:20:37 +0000 (21:20 +0200)]
Renamed Atari drivers.
As a preparation for the introduction of the 'atarixl' target it is
necessary that all drivers have a base name...
- no longer than 7 characters
- with a common prefix
Oliver Schmidt [Mon, 20 May 2013 18:35:42 +0000 (20:35 +0200)]
Added 'sim6502' and 'sim65C02' targets.
The targets allow to run cc65 programs in the sim65 exection
einvironment. As there are no "real" i/o facilities there's no
need for header files. Paravirtualized entry points are mapped
to $FFF0 ff. There's a large cc65 progam area from $0200-$FFEF.
The binary format includes a one-byte header indicating the required
execution environment: The value 0 means 6502 and the value 1
means 65C02. The load adress for the binary is fixed to $0200.
Note: Running sim65C02 programs currently doesn't work bcause
sim65 doesn't actually implement 65C02 opcodes.
Oliver Schmidt [Mon, 20 May 2013 18:20:14 +0000 (20:20 +0200)]
Turned sim65 into a lightweight cc65 execution environment.
The sim65 source code has been a construction site for over a decade.
I was looking for a simple cc65 program execution environment for
regression tests. So I decided to re-purpose sim65 for that task by
removing about everything but the 6502 emulation.
There's no memory mapped i/o emulation whatsoever. Rather exit(),
open(), close(), read() and write() calls are supported by mapping
them through a thin paravirtualization layer to the corresponding
host os functions.
Note: The sim65 6502 emulation provides means to switch between
6502 and 65C02 emulation but currently there are no actual 65C02
opcodes implemented.
Oliver Schmidt [Fri, 17 May 2013 14:21:05 +0000 (16:21 +0200)]
Have 'avail' not be dependent on 'all'.
There are two reasons for removing this dependency:
- If someone does 'make avail' on the top level Makefile he ends up with
binaries but without libraries - not nice. Better do just "nothing" and
have hin understand that he needs to do 'make [all]' on the top level
Makfile first.
- If 'make avail' is done via 'sudo' it isn't desirable to do a large amount
of work as root.
BTW: I wasn't sure if this dependency is a good thing in the first place
but I saw it in many examples ('install' depending on 'all') so I did it too.
Oliver Schmidt [Wed, 15 May 2013 09:59:51 +0000 (11:59 +0200)]
Renamed [un]install goals to [un]avail.
The [un]install make goals have a rather fixed meaning for *ix users. The simple
symlinks provided here don't match the expectations users have from [un]install.
Therefore it is appropriate to rename them to "something" not tied to specific
expectations.
Oliver Schmidt [Wed, 8 May 2013 23:32:48 +0000 (01:32 +0200)]
Hack: Changed TARGET order to have apple2enh.lib available for convert.system.
There's a quite special case of a targetutil for the TARGET geos-apple having to be
built as TARGET apple2enh binary. We can't just add a dependency to ../lib/apple2enhlib
because the TARGETs are built in individual make instances (because of vpath).
Doing that the "right way" would be _very_ complicated and would turn the Makefiles way
less readable. Therefore I decided to solve that by just reordering the TARGETs. Surely
this won't work if i.e. 'make geos-apple' is entered on a clean system. But still I consider
it appropriate.
I ordered the TARGETs btw so that they are more in an alphabetical order...
Oliver Schmidt [Tue, 7 May 2013 15:58:56 +0000 (17:58 +0200)]
Removed reference to CC65_HOME.
Now that we're pretty much independent from CC65_HOME
it doesn't make sense anymore to look for it in the Makefiles.
So rather dynamically check if there are "local" binaries in the
../bin directory. If there are "local" binaries use them - and
otherwise rely on "installed" binaries found in the path.
Oliver Schmidt [Mon, 6 May 2013 22:47:37 +0000 (00:47 +0200)]
Have cl65 run the binaries from its own directory.
While ca65, cc65 and ld65 have built-in paths cl65 doesn't.
That means that up to now cl65 depended on the binaries
being found in the path env var. However it makes sense
to presume that the binaries are located in the very same
directory cl65 is located in. So whatever pathname was
suitable to run cl65 should be suitable to run the other
binaries too. But if for some reason there's no valid
argv[0] or if it doesn't contain at least one directory
delimiter ('/' or '\') then fall back to relying on the
path env var.
Oliver Schmidt [Mon, 6 May 2013 21:20:56 +0000 (23:20 +0200)]
Added search path relative to running binary on Windows.
In contrast to *IX it doesn't make much sense to add compile time defined
search paths to Windows binaries: There's no standard path like /usr/local/bin
(and there are no symbolic links to link from there to another location).
On the other hand it's (again in contrast to *IX) easy for Windows binaries
to determine their own paths. Therefore it's appropriate to make use of that
to add run time defined default search paths.
Oliver Schmidt [Sat, 4 May 2013 20:15:30 +0000 (22:15 +0200)]
Replaced whole bunch for Makefiles with a single generic Makefile.
- No complex shell logic.
- "Source file shadowing" for all targets via vpath.
- Dependency handling.
- True incremental build.
- Don't write into source directories.
- Easy cleanup by just removing 'wrk'.
Oliver Schmidt [Sat, 4 May 2013 20:10:48 +0000 (22:10 +0200)]
Replaced whole bunch for Makefiles with a single generic Makefile.
- No complex shell logic.
- "Source file shadowing" for all targets via vpath.
- Dependency handling.
- True incremental build.
- Don't write into source directories.
- Easy cleanup by just removing 'wrk'.
Oliver Schmidt [Sun, 28 Apr 2013 20:30:18 +0000 (22:30 +0200)]
Replaced elaborate install logic with just a bunch of symlinks.
Maybe I'm naive but even after thinking about it for quite
some time I can't see why it should hurt to just build the
cc65 binaries from the sources "in place" and have 'make
install' simply create some symlinks in usr/local/bin.
The new Makfile builds the binaries with builtin search paths
matching their build location. So the symlinks in usr/local/bin
allow to allow to use them out-of-the-box without additional
environment variables.