Orestis Floros [Sun, 25 Mar 2018 01:45:19 +0000 (04:45 +0300)]
_con_move_to_con: don't change focus when moving to active workspace
Seems to be the intention, indicated by this comment (con.c:1307-1309):
/* For split containers, we use the currently focused container within it.
* This allows setting marks on, e.g., tabbed containers which will move
* con to a new tab behind the focused tab. */
Elouan Martinet [Tue, 20 Mar 2018 13:06:17 +0000 (13:06 +0000)]
Fix potential memory leak
xkb_state_new uses calloc and may fail in a rare case, which would cause a memory leak.
Note that xkb_state_unref checks if the parameter given is not null (!state) before freeing.
Calls to xkb_state_new have been grouped to remove code duplication.
con_next_focused uses con's parent. But since con can be inside an
unfocused container this means that one of it's siblings could become
focused in the current workspace.
Orestis Floros [Fri, 23 Mar 2018 10:56:30 +0000 (12:56 +0200)]
_con_move_to_con: showing target_ws is useless
The current_ws is shown latter anyway:
if (!ignore_focus) {
workspace_show(current_ws);
...
This also causes the following bug:
- Open a window in an empty workspace
- Switch to another workspace
- seturgent to the first window
- Move another window to the first workspace
- Urgent flag is now reset
Orestis Floros [Sat, 17 Mar 2018 18:43:11 +0000 (20:43 +0200)]
floating_maybe_reassign_ws: use get_output_from_rect
This significantly reduces the number of ELOGs while dragging floating
containers. The behaviour is improved since floating containers in the
edge of the screen will still get reassigned to their closest workspace.
For example, consider this setup:
fake-outputs 500x500+0+0,500x500+500+0
Now, open a window in the right output and run:
i3-msg floating enable, move position 0 px 450 px
The window is on the bottom edge of the left workspace but if you run:
i3-msg focus mode_toggle
focus will go to the right workspace since floating_maybe_reassign_ws
didn't change the assigned workspace of the floating container.
Orestis Floros [Sat, 17 Mar 2018 15:47:16 +0000 (17:47 +0200)]
floating_enable: change reassign logic
This allows the floating container's top left corner to be mapped
outside any output as long as they are contained partially by one. This,
for example, will allow:
mpv --geometry +1+1 video.mp4
For windows mapped to (0, 0) see comment in floating.c:270-273:
/* Some clients (like GIMP’s color picker window) get mapped
* to (0, 0), so we push them to a reasonable position
* (centered over their leader) */
The floating_reassign_ws call is removed since we try to place the new
floating container in the current output:
/* Sanity check: Are the coordinates on the appropriate output? If not, we
* need to change them */
Tony Crisci [Mon, 25 Jul 2016 00:43:56 +0000 (20:43 -0400)]
Support _NET_WM_STATE_FOCUSED
_NET_WM_STATE_FOCUSED is set on _NET_WM_STATE to indicate that the
window is focused. It must be set when the window is newly focused and
removed once the window no longer has focus.
> _NET_WM_STATE_FOCUSED indicates whether the window's decorations are
> drawn in an active state. Clients MUST regard it as a read-only hint.
> It cannot be set at map time or changed via a _NET_WM_STATE client
> message.
For example, this is used by GTK applications to show the decoration in
an active or inactive state. This change can be tested by opening a GTK
application (like evince), focusing the window and unfocusing the
window, and observing a change in the window decorations.
Orestis Floros [Sun, 18 Mar 2018 00:08:16 +0000 (02:08 +0200)]
Remove 'method' from cmd_move_window_to_position
For command:
move window to [absolute] position X px Y px
if the optional keyword 'absolute' is provided the end result is the
same even though it is implemented differently. Only difference is that
with absolute the floating window can move completely outside of any
output.
This commit removes the 'method' argument and only keeps the sane
implementation.
Orestis Floros [Mon, 19 Mar 2018 16:30:22 +0000 (18:30 +0200)]
Fix userguide link
[[move_to_outputs]] doesn't work currently:
https://i3wm.org/docs/userguide.html#move_to_outputs
This does:
https://i3wm.org/docs/userguide.html#_moving_containers_workspaces_to_randr_outputs
This combines a 'BlockId Element' with an 'anchor'. Both should work
now.
This means that the pointers stored in window->ran_assignments are
invalid (shouldn't be dangerous currently but could lead to a segfault
if the code is modified) after a 'reload'.
Orestis Floros [Sun, 18 Mar 2018 01:38:06 +0000 (03:38 +0200)]
i3-msg: only print input + errorposition if they exist
Before:
$ i3-msg floating disable, move window to position 100 px 100 px
ERROR: Your command: (null)
ERROR: (null)
ERROR: Cannot change position of a window/container because it is not floating.
[{"success":true},{"success":false,"error":"Cannot change position of a window/container because it is not floating."}]
After:
$ i3-msg floating disable, move window to position 100 px 100 px
ERROR: Cannot change position of a window/container because it is not floating.
[{"success":true},{"success":false,"error":"Cannot change position of a window/container because it is not floating."}]
Tony Crisci [Mon, 25 Jul 2016 00:43:09 +0000 (20:43 -0400)]
testcases: remove assumption from state atoms test
Remove the assumption that only two atoms can possibly be set in
t/253-multiple-net-wm-state-atoms.t so that the tests will pass when
more atoms are supported that may be set during this test.
Fixes:
- Issue where moving an urgent (unfocused) window resets it's urgency
hint.
- Moving an unfocused container to a new parent should not move it to
the top of the focus stack.
Ingo Bürk [Sat, 10 Mar 2018 18:18:44 +0000 (19:18 +0100)]
Refocus focused window for FOCUS_IN events on the root window. (#3097)
This deals with (admittedly somewhat misbehaving) clients which
use XSetInputFocus to take focus, but then don't properly restore
focus. This has been observed with TK apps, but also, e.g., Steam.
Orestis Floros [Mon, 26 Feb 2018 01:26:05 +0000 (03:26 +0200)]
Don't raise floating windows when workspace is shown
From comment:
https://github.com/i3/i3/issues/2990#issuecomment-368345169
To easily reproduce:
1. Open 2 floating windows
2. Focus (with `focus_follows_mouse`) the one behind
3. Move the mouse to the other workspace
4. Move the mouse inside the previous workspace (without it even
touching a window)
Ben Creasy [Mon, 19 Feb 2018 02:44:40 +0000 (18:44 -0800)]
Remove hardcoded 2013 date
The front page and docs landing page emphasize documentation, but the user guide looks like it hasn't been updated since 2013. It seems from the history of the file that this number is misleading. Let me know if I'm missing anything.
projects / i3 / i3 / log