]>
git.sur5r.net Git - openocd/log
mifi [Wed, 16 Apr 2008 18:04:40 +0000 (18:04 +0000)]
- added testing binaries
git-svn-id: svn://svn.berlios.de/openocd/trunk@587
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Wed, 16 Apr 2008 09:22:52 +0000 (09:22 +0000)]
- correct stm32stick config script
git-svn-id: svn://svn.berlios.de/openocd/trunk@586
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 16 Apr 2008 09:17:22 +0000 (09:17 +0000)]
Update Embedded ICE registers explicitly during target->type->examine() instead
of as a side effect of target->type->poll(). This makes it clearer when things
happen during reset/examine.
git-svn-id: svn://svn.berlios.de/openocd/trunk@585
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 16 Apr 2008 07:59:02 +0000 (07:59 +0000)]
Edgar Grimberg added some missing scripts from the install
git-svn-id: svn://svn.berlios.de/openocd/trunk@584
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 16 Apr 2008 07:34:22 +0000 (07:34 +0000)]
fix SEGFAULT regression in cortex after TRST fixes
git-svn-id: svn://svn.berlios.de/openocd/trunk@583
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 15 Apr 2008 19:08:25 +0000 (19:08 +0000)]
- sw_bkpts fails if the target is not halted. The side effect is
that sw_bkpts also fails if the target is an unknown state(i.e.
not examined yet).
- feroceon embedded ICE registers are now set up after TRST
has been deasserted(not tested, but it was broken as is
anyway).
git-svn-id: svn://svn.berlios.de/openocd/trunk@582
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 15 Apr 2008 18:08:36 +0000 (18:08 +0000)]
Added checks for target->type->read/write_memory, soft_reset_halt and run_algorithm that the target has been examined.
git-svn-id: svn://svn.berlios.de/openocd/trunk@581
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 15 Apr 2008 17:03:13 +0000 (17:03 +0000)]
target read/write is no longer attempted for target_xxx() functions when the target has not been examined(fails w/error).
git-svn-id: svn://svn.berlios.de/openocd/trunk@580
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 14 Apr 2008 08:15:23 +0000 (08:15 +0000)]
- added new and missing target scripts - stm32stick and str730
git-svn-id: svn://svn.berlios.de/openocd/trunk@579
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 14 Apr 2008 07:57:01 +0000 (07:57 +0000)]
retired fast_memory_access. It's always fast now.
git-svn-id: svn://svn.berlios.de/openocd/trunk@578
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 14 Apr 2008 07:26:13 +0000 (07:26 +0000)]
- split str71x driver into banks
- support new str91x/str9xpec devices
- update target scripts and docs for changes
git-svn-id: svn://svn.berlios.de/openocd/trunk@577
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 14 Apr 2008 06:26:53 +0000 (06:26 +0000)]
moved out stuff that wasn't already moved from openocd.pdf to the target library.
git-svn-id: svn://svn.berlios.de/openocd/trunk@576
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 14 Apr 2008 06:02:11 +0000 (06:02 +0000)]
Added a few tweaks while playing with texi.
git-svn-id: svn://svn.berlios.de/openocd/trunk@575
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 14 Apr 2008 01:34:45 +0000 (01:34 +0000)]
TRST is asserted *before* target->type->assert_reset() is invoked. Removed old code.
git-svn-id: svn://svn.berlios.de/openocd/trunk@574
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 13 Apr 2008 13:29:33 +0000 (13:29 +0000)]
More robust handling of unknown target state for step/continue packet.
git-svn-id: svn://svn.berlios.de/openocd/trunk@573
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 13 Apr 2008 13:21:49 +0000 (13:21 +0000)]
A dummy driver to test codepath w/no contact w/target.
git-svn-id: svn://svn.berlios.de/openocd/trunk@572
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 13 Apr 2008 12:08:06 +0000 (12:08 +0000)]
allows launching OpenOCD w/telnet+gdb server w/the
target powered down.
git-svn-id: svn://svn.berlios.de/openocd/trunk@571
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 13 Apr 2008 11:42:49 +0000 (11:42 +0000)]
allows launching OpenOCD w/telnet+gdb server w/the
target powered down.
git-svn-id: svn://svn.berlios.de/openocd/trunk@570
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 13 Apr 2008 10:09:27 +0000 (10:09 +0000)]
- Set up ICE registers after TRST
- Work in progress to allow launching GDB/telnet server *before* jtag
chain enum, validate & examine
git-svn-id: svn://svn.berlios.de/openocd/trunk@569
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Apr 2008 15:56:57 +0000 (15:56 +0000)]
found two more gaffes for reset wip
git-svn-id: svn://svn.berlios.de/openocd/trunk@568
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Apr 2008 15:49:31 +0000 (15:49 +0000)]
fixed gaffe for default examine implementation
git-svn-id: svn://svn.berlios.de/openocd/trunk@567
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Apr 2008 14:11:16 +0000 (14:11 +0000)]
Reset wip. Just adding hooks. This is just to reduce the size of the actual change, no change in behaviour.
git-svn-id: svn://svn.berlios.de/openocd/trunk@566
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Apr 2008 14:06:42 +0000 (14:06 +0000)]
Reset wip. Just adding hooks. This is just to reduce the size of the actual change, no change in behaviour.
git-svn-id: svn://svn.berlios.de/openocd/trunk@565
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Apr 2008 11:19:17 +0000 (11:19 +0000)]
Wip - split target setup and target examination
git-svn-id: svn://svn.berlios.de/openocd/trunk@564
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Apr 2008 06:52:52 +0000 (06:52 +0000)]
added target->type->examine(). Eventually this will allow for bringing up telnet/gdb *before* jtag chain has been validated + it might fix some reset halt problems seen as examine() needs to run after TRST has been asserted.
git-svn-id: svn://svn.berlios.de/openocd/trunk@563
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Apr 2008 06:45:27 +0000 (06:45 +0000)]
Improved XScale performance for embedded hosted OpenOCD
git-svn-id: svn://svn.berlios.de/openocd/trunk@562
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mifi [Thu, 10 Apr 2008 19:49:47 +0000 (19:49 +0000)]
- remove AC_C_VARARRAYS and set check of autoconf back to 2.59
git-svn-id: svn://svn.berlios.de/openocd/trunk@561
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 10 Apr 2008 19:44:56 +0000 (19:44 +0000)]
stop using variable sized arrays. That's something that belongs to C++ and not C.
git-svn-id: svn://svn.berlios.de/openocd/trunk@560
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 10 Apr 2008 11:45:54 +0000 (11:45 +0000)]
- added svn props for newly added parport.cfg
git-svn-id: svn://svn.berlios.de/openocd/trunk@559
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 10 Apr 2008 11:43:48 +0000 (11:43 +0000)]
- single core context used, removed debug context as thought unnecessary.
- DCRDR now used to access special core registers - info is currently omitted from the cortex_m3 TRM ARM have told me this is the preferred access method and the docs will be updated soon.
- now checks for User Thread Mode and Thread mode when halted.
- removed repeated function declarations from command.c
- cortex_m3_prepare_reset_halt removed, updated cortex_m3_assert_reset to suit
git-svn-id: svn://svn.berlios.de/openocd/trunk@558
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 10 Apr 2008 10:11:04 +0000 (10:11 +0000)]
- due to previous patch adding AC_C_VARARRAYS, autoconf v2.61 min required
git-svn-id: svn://svn.berlios.de/openocd/trunk@557
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 9 Apr 2008 14:21:14 +0000 (14:21 +0000)]
target lib wip
git-svn-id: svn://svn.berlios.de/openocd/trunk@556
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 9 Apr 2008 12:58:19 +0000 (12:58 +0000)]
back out Don Porges workaround for some device with manufcaturer # 0x1a2
git-svn-id: svn://svn.berlios.de/openocd/trunk@555
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Wed, 9 Apr 2008 07:31:24 +0000 (07:31 +0000)]
- add missing svn props
git-svn-id: svn://svn.berlios.de/openocd/trunk@554
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 9 Apr 2008 05:55:23 +0000 (05:55 +0000)]
Don Porges fixed c99 issues.
git-svn-id: svn://svn.berlios.de/openocd/trunk@553
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 9 Apr 2008 05:50:34 +0000 (05:50 +0000)]
- added "init" command. "init" and "reset" at end of startup script is equivalent
to daemon_startup(still supported).
- print warning if srst and trst change state at the same time when srst_and_trst
is seperate
- reset now performs a trst, examines and validates the jtag chain before targets
assert reset
- if startup fails to examine and validate the jtag chain, try a reset before
trying again
git-svn-id: svn://svn.berlios.de/openocd/trunk@552
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 8 Apr 2008 19:23:50 +0000 (19:23 +0000)]
use jtag.c's cur/end_state global variables.
git-svn-id: svn://svn.berlios.de/openocd/trunk@551
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 8 Apr 2008 18:55:39 +0000 (18:55 +0000)]
Edwin Olson found bug & tested fix for flash write_image for stellaris.
git-svn-id: svn://svn.berlios.de/openocd/trunk@550
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 8 Apr 2008 16:37:01 +0000 (16:37 +0000)]
lm3s6965.cfg contributed by Edwin Olson
git-svn-id: svn://svn.berlios.de/openocd/trunk@549
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 8 Apr 2008 16:27:50 +0000 (16:27 +0000)]
added a couple of LOG_ERROR() messages to improve logfile.
git-svn-id: svn://svn.berlios.de/openocd/trunk@548
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 8 Apr 2008 13:08:36 +0000 (13:08 +0000)]
Pavel pointed out that jtag_add_tlr() is better than jtag_add_tms().
git-svn-id: svn://svn.berlios.de/openocd/trunk@547
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 8 Apr 2008 09:03:49 +0000 (09:03 +0000)]
The endstate now reports the endstate of the queue instead of
reading endstate variable internal to the driver.
git-svn-id: svn://svn.berlios.de/openocd/trunk@546
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 7 Apr 2008 17:29:21 +0000 (17:29 +0000)]
Spen fixed various issues w.r.t. setting up the sockets for optimal performance.
git-svn-id: svn://svn.berlios.de/openocd/trunk@545
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 7 Apr 2008 10:48:44 +0000 (10:48 +0000)]
- only if "reset halt" or "reset init" are issued will the reset vector be set up
- If communication fails during assert between assert/deassert and during
assert, warnings are printed. The warning suggests using srst_only if the
clock locks up as that would allow the reset vector to be set up before
asserting reset.
git-svn-id: svn://svn.berlios.de/openocd/trunk@544
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 7 Apr 2008 05:42:28 +0000 (05:42 +0000)]
at91eb40a.elf moved to src/target/ecos
git-svn-id: svn://svn.berlios.de/openocd/trunk@543
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 6 Apr 2008 19:59:32 +0000 (19:59 +0000)]
avoid patch trouble by isolating troublesome line...
git-svn-id: svn://svn.berlios.de/openocd/trunk@542
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sat, 5 Apr 2008 10:07:12 +0000 (10:07 +0000)]
- added note to docs about gdb 6.8 and memory map support
git-svn-id: svn://svn.berlios.de/openocd/trunk@541
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 4 Apr 2008 14:09:03 +0000 (14:09 +0000)]
- the reset mode parameter is now DEPRECATED. It is implemented
as an optional parameter with default reset_init. This is to streamline
things w.r.t. the target library.
git-svn-id: svn://svn.berlios.de/openocd/trunk@540
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 4 Apr 2008 13:47:38 +0000 (13:47 +0000)]
- reverted some of the changes that possibly broke arm926ejs. Waiting
for a bit more info before I can tell with confidence whether or not
this would have any effect.
- worked on error propagation and output for flash
git-svn-id: svn://svn.berlios.de/openocd/trunk@539
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 4 Apr 2008 07:43:04 +0000 (07:43 +0000)]
added query of reset speed
git-svn-id: svn://svn.berlios.de/openocd/trunk@538
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mifi [Thu, 3 Apr 2008 19:42:30 +0000 (19:42 +0000)]
- added test results
git-svn-id: svn://svn.berlios.de/openocd/trunk@537
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 3 Apr 2008 14:00:17 +0000 (14:00 +0000)]
- Work on fixing erase check. Many implementations are plain broken.
Wrote a default flash erase check fn which uses CFI's target algorithm
w/fallback to memory reads.
- "flash info" no longer prints erase status as it is stale.
- "flash erase_check" now prints erase status. erase check can take a
*long* time. Work in progress
- arm7/9 with seperate srst & trst now supports reset init/halt
after a power outage. arm7/9 no longer makes any assumptions
about state of target when reset is asserted.
- fixes for srst & trst capable arm7/9 with reset init/halt
- prepare_reset_halt retired. This code needs to be inside
assert_reset anyway
- haven't been able to get stm32 write algorithm to work. Fallback
flash write does work. Haven't found a version of openocd trunk
where this works.
- added target_free_all_working_areas_restore() which can
let be of restoring backups. This is needed when asserting
reset as the target must be assumed to be an unknown state.
Added some comments to working areas API
- str9 reset script fixes
- some guidelines
- fixed dangling callbacks upon reset timeout
git-svn-id: svn://svn.berlios.de/openocd/trunk@536
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 2 Apr 2008 14:47:21 +0000 (14:47 +0000)]
Edgar Grimberg sharpened the str912 target script.
git-svn-id: svn://svn.berlios.de/openocd/trunk@535
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 2 Apr 2008 14:40:35 +0000 (14:40 +0000)]
fix flash info - now reports erased state properly
git-svn-id: svn://svn.berlios.de/openocd/trunk@534
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 2 Apr 2008 06:37:08 +0000 (06:37 +0000)]
Added timeout(instead of infinite loop) to soft_reset_halt
git-svn-id: svn://svn.berlios.de/openocd/trunk@533
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 2 Apr 2008 06:21:24 +0000 (06:21 +0000)]
optional count argument to mwX
git-svn-id: svn://svn.berlios.de/openocd/trunk@532
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 1 Apr 2008 17:48:09 +0000 (17:48 +0000)]
- fixes for jtag_khz committed.
- wip, flash fillw/h/b. For testing purposes.
git-svn-id: svn://svn.berlios.de/openocd/trunk@531
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 31 Mar 2008 19:39:05 +0000 (19:39 +0000)]
Do not assert trst in srst_only case even if srst_pulls_trst.
git-svn-id: svn://svn.berlios.de/openocd/trunk@530
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 31 Mar 2008 19:34:01 +0000 (19:34 +0000)]
target_call_timer_callbacks_now() now invokes periodic callbacks immediately
git-svn-id: svn://svn.berlios.de/openocd/trunk@529
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 31 Mar 2008 19:32:38 +0000 (19:32 +0000)]
Removed exit()'s. A reset is usually enough to work around these, reducing cycle times
to get config scripts right.
git-svn-id: svn://svn.berlios.de/openocd/trunk@528
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 31 Mar 2008 13:18:03 +0000 (13:18 +0000)]
make jtag_add_statemove() internal to the driver.
git-svn-id: svn://svn.berlios.de/openocd/trunk@527
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 28 Mar 2008 11:28:54 +0000 (11:28 +0000)]
Edgar Grimberg: added needed delays
git-svn-id: svn://svn.berlios.de/openocd/trunk@526
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 26 Mar 2008 13:29:48 +0000 (13:29 +0000)]
TAP_SD/SI are now forbidden end states.
jtag_add_reset() now returns void streamlining the API
git-svn-id: svn://svn.berlios.de/openocd/trunk@525
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 26 Mar 2008 13:18:23 +0000 (13:18 +0000)]
hooks for multithreading. Disable nagle
git-svn-id: svn://svn.berlios.de/openocd/trunk@524
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Tue, 25 Mar 2008 15:45:17 +0000 (15:45 +0000)]
- rename log functions to stop conflicts under win32 (wingdi)
git-svn-id: svn://svn.berlios.de/openocd/trunk@523
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sat, 22 Mar 2008 14:19:46 +0000 (14:19 +0000)]
- gdb server was incorrectly sending null terminator on qXfer:features:read: packet
- armv7m now sends correct gdb register packet
git-svn-id: svn://svn.berlios.de/openocd/trunk@522
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sat, 22 Mar 2008 14:09:27 +0000 (14:09 +0000)]
- updated docs with new commands/features
- added deprecated/removed commands chapter
git-svn-id: svn://svn.berlios.de/openocd/trunk@521
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sat, 22 Mar 2008 10:30:00 +0000 (10:30 +0000)]
- changed jtag_add_reset errors to warnings
- removed extra jtag reset warnings from arm7_9 and cortex_m3
git-svn-id: svn://svn.berlios.de/openocd/trunk@520
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Fri, 21 Mar 2008 12:53:29 +0000 (12:53 +0000)]
- armv7m control register now set as dirty when switching context
- armv7m added core_mode to cortex_m3_debug_entry DEBUG msg
- cortex_m3 changed WARNINGS to DEBUG msg in cortex_m3_resume
git-svn-id: svn://svn.berlios.de/openocd/trunk@519
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mifi [Fri, 21 Mar 2008 11:27:42 +0000 (11:27 +0000)]
- added new test results
git-svn-id: svn://svn.berlios.de/openocd/trunk@518
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
drath [Mon, 17 Mar 2008 21:39:18 +0000 (21:39 +0000)]
- fix warnings during configure cause by ecosboard. default to no, if host cpu isn't arm.
- fix generic bitbang code to allow scans to end in Shift-[ID]R
- several CFI fixes (thanks to Michael Schwingen):
- buffer overflow when converting target code in cfi_intel_write_block -
cfi_fix_code_endian needs the number of words, not bytes, as size
argument.
- Spansion flash write was completely broken on big-endian targets - I
borrowed mechanisms from the intel driver, and moved some common code
into the cfi_command_val helper function. There is still more common code
that might be cleaned up.
- the buffer size check in cfi_write was broken for spansion flashes, where
cfi_write_words is not implemented. cfi_write_words is no only called if
the flash does have a buffer size >1.
- "flash info" printed CFI status information for non-CFI flashes, which is
confusing. It now only prints those when a real CFI flash is detected.
git-svn-id: svn://svn.berlios.de/openocd/trunk@517
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 14 Mar 2008 11:20:46 +0000 (11:20 +0000)]
added profile command. It was added to simplify evaluation by testers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@516
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 13 Mar 2008 20:09:33 +0000 (20:09 +0000)]
reset and post reset speed & jtag_khz command documented.
git-svn-id: svn://svn.berlios.de/openocd/trunk@515
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 13 Mar 2008 15:46:40 +0000 (15:46 +0000)]
Michael Bruck: fixed warnings
git-svn-id: svn://svn.berlios.de/openocd/trunk@514
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 13 Mar 2008 13:58:07 +0000 (13:58 +0000)]
clarified jtag_khz command.
git-svn-id: svn://svn.berlios.de/openocd/trunk@513
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 13 Mar 2008 11:07:21 +0000 (11:07 +0000)]
added jtag_khz for use with target library
git-svn-id: svn://svn.berlios.de/openocd/trunk@512
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 13 Mar 2008 10:14:41 +0000 (10:14 +0000)]
- adds two speeds to jtag_speed. reset and post reset speed. Default
is post reset = reset speed.
- removed infinite loop's and exit()'s upon poor arm7/9 communication
- cleaned up error messages a bit. Push ERROR() up into fn's that
fail and can say something meaningful about what failed.
git-svn-id: svn://svn.berlios.de/openocd/trunk@511
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 13 Mar 2008 08:17:01 +0000 (08:17 +0000)]
print ms in debug_level 3 logs. Seconds is not enough.
git-svn-id: svn://svn.berlios.de/openocd/trunk@510
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 13 Mar 2008 08:16:34 +0000 (08:16 +0000)]
XScale excessive waiting fix.
git-svn-id: svn://svn.berlios.de/openocd/trunk@509
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 13 Mar 2008 08:05:10 +0000 (08:05 +0000)]
marked infinite loop in code w/TODO and fixed warning.
git-svn-id: svn://svn.berlios.de/openocd/trunk@508
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 12 Mar 2008 18:05:07 +0000 (18:05 +0000)]
Dominic undid some of my damage. CLK should now be set as intended in all cases.
git-svn-id: svn://svn.berlios.de/openocd/trunk@507
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 12 Mar 2008 16:03:30 +0000 (16:03 +0000)]
xscale now passes w/bitbang in 505
git-svn-id: svn://svn.berlios.de/openocd/trunk@506
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 12 Mar 2008 16:01:30 +0000 (16:01 +0000)]
The bitbang driver leaves the TCK 0 when in idle
git-svn-id: svn://svn.berlios.de/openocd/trunk@505
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 12 Mar 2008 14:45:26 +0000 (14:45 +0000)]
This moves common code into functions so as to make it clear
that all the jtag_add_xxx() are indeed intended to do the same thing.
git-svn-id: svn://svn.berlios.de/openocd/trunk@504
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 12 Mar 2008 14:38:43 +0000 (14:38 +0000)]
fixed regression in XScale introduce in 297
git-svn-id: svn://svn.berlios.de/openocd/trunk@503
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 12 Mar 2008 08:39:55 +0000 (08:39 +0000)]
more info about latest working version
git-svn-id: svn://svn.berlios.de/openocd/trunk@502
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 12 Mar 2008 08:04:24 +0000 (08:04 +0000)]
Corrections from Dominic
git-svn-id: svn://svn.berlios.de/openocd/trunk@501
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 12 Mar 2008 07:34:10 +0000 (07:34 +0000)]
tinkered a bit with testing matrix.
git-svn-id: svn://svn.berlios.de/openocd/trunk@500
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 11 Mar 2008 21:32:03 +0000 (21:32 +0000)]
reduce compare noise. If someone should be crazy enough to try to run OpenOCD under eCos, then they'v got some hooks to point them in the general direction.
git-svn-id: svn://svn.berlios.de/openocd/trunk@499
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 11 Mar 2008 21:18:44 +0000 (21:18 +0000)]
With the recent changes the TRST needs to happen for every reset.
git-svn-id: svn://svn.berlios.de/openocd/trunk@498
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 11 Mar 2008 21:17:46 +0000 (21:17 +0000)]
tidy up output a bit. No longer show "accepted connection" inside Telnet session.
git-svn-id: svn://svn.berlios.de/openocd/trunk@497
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 11 Mar 2008 21:16:57 +0000 (21:16 +0000)]
- retired unused jtag events. The code was incorrect
- hopefully clarified the difference between TRST and TMS reset.
- added DEBUG() statements w.r.t. state changes
- TRST released and moving out of TAP_TLR are completely
different events. Only TRST released has a DEBUG() statement
git-svn-id: svn://svn.berlios.de/openocd/trunk@496
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Tue, 11 Mar 2008 18:39:43 +0000 (18:39 +0000)]
- 16 and 32 bit unaligned accesses supported
- uses packed transfers for 8/16bit read/writes greater than 4bytes
- 8/16bit transfers now use address auto increment
git-svn-id: svn://svn.berlios.de/openocd/trunk@495
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 11 Mar 2008 11:19:15 +0000 (11:19 +0000)]
retire unused code.
git-svn-id: svn://svn.berlios.de/openocd/trunk@494
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 11 Mar 2008 11:03:40 +0000 (11:03 +0000)]
JTAG_END_STATE is now retired. It is no longer queued.
git-svn-id: svn://svn.berlios.de/openocd/trunk@493
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 11 Mar 2008 09:06:00 +0000 (09:06 +0000)]
- fixed jtag_add_reset(). It no longer causes jtag_execute_queue() to
fail for two of it's return codes. A little bit weird, but compatible with
existing codebase.
- tightend up error handling. Since the jtag_xxx() is a queue that is either
executed as things are added(hw queue) or a software queue, then
errors can only be caught during jtag_execute_queue(). No error
code is therefore returned from the queuing fn's.
git-svn-id: svn://svn.berlios.de/openocd/trunk@492
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 11 Mar 2008 08:15:54 +0000 (08:15 +0000)]
Pavel Chromy: telnet line buffer size checking, history does not store repeating lines, improved history printing, log callback tweak
git-svn-id: svn://svn.berlios.de/openocd/trunk@491
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 10 Mar 2008 20:19:52 +0000 (20:19 +0000)]
backed out changes from 483.
git-svn-id: svn://svn.berlios.de/openocd/trunk@490
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 10 Mar 2008 20:12:46 +0000 (20:12 +0000)]
more target scripts wip.
git-svn-id: svn://svn.berlios.de/openocd/trunk@489
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 10 Mar 2008 20:12:35 +0000 (20:12 +0000)]
more target scripts wip.
git-svn-id: svn://svn.berlios.de/openocd/trunk@488
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
projects / openocd / log