Add init_board documentation

This patch adds init_board concept information to OpenOCD manual.
Additionally a link from init_targets chapter to new chapter about
init_board is added.

Change-Id: I09b9aaa1cf68b94f35701224f641cae9811a5bcf
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/440
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

cfg: add revb ek-lm3s811 board config

Add board config for older (revb) ek-lm3s811

Change-Id: I75aca1714de3e88b60d00fa0f99f2c4b076b569c
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/444
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

cfg: fix incorrect STM32L SW-DP id

STM32L ref manual (RM00038 Rev5) states the SW-DP id should be 0x4ba00477.
The correct value from silicon is 0x2ba01477 - the typo has been confirmed by ST.

Change-Id: Ie35a1f13dc5dedc1b148fb219c6974bfa48b537c
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/441
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

cfg: add stm32ldiscovery board config

Change-Id: I392fdc4c588783fda1c7d4d6413b86ae9aa3f6b9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/442
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

cfg: add ST-LINK TRANSPORT config override

This enables the user to override the transport used for st-link.
If JTAG is selected it will also change the default id used to the JTAG id
rather than the SW-DP id.

Change-Id: I4fe352e4932e2f4ec278168e99ba2d2d50fd850a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/443
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

Add init_board procedure executed after init_targets

This adds init_board procedure that behaves exactly the same as
init_targets - it can be overriden by "next level" scripts. This
procedure is executed after init_targets, allowing common stuff (jtag
chain, memory, flash, ...) to be configured in target script (via
init_target) and leaving rest (like additional memory, reset
configuration, reset-init handlers, ...) to be done in init_board.

This makes init_targets scheme more complete and easier to use - current
board scripts will not need new init_targets, because everything can be
"packed" in init_boards. Moreover it solves the problem of variables
being set in init_targets (executed after init), which were not
accessible by "linear" scripts (parsed before init). All that has to be
done is to enclose all code in board config file in init_board
procedure.

Change-Id: I0736b1ff9873a687966407d62b58ccf29a8e597b
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/427
Reviewed-by: Chris Morgan <chmorgan@gmail.com>
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

Add missing init_targets documentation

Add init_targets procedure documentation to OpenOCD manual explaining
the concept.

Change-Id: I82933ed90397cbcdc5c72801182573ca69b1d265
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/439
Reviewed-by: Chris Morgan <chmorgan@gmail.com>
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

cfg: add stm32vldiscovery board config

Change-Id: I6343d1e61153ba71c71f8a473171972abb8e400d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/432
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

docs: add original stlink (STLINK-V1) usage note

Add a note to the docs about the original stlink being broken under linux.

Change-Id: Ib440d78e5c7d31eeace99f611a76fcf701bfb8bc
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/433
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

Export _TARGETNAME from generic LPC2xxx script

Make _TARGETNAME variable global so it could be used by scripts sourcing it.

Change-Id: Iaf1c3b53875734658b1b8f136c9bb958988b56bf
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/421
Tested-by: jenkins
Reviewed-by: Chris Morgan <chmorgan@gmail.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

doxygen: use correct comment syntax

This issue was caused by uncrustify not correctly converting the doxygen
comments.

Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Change-Id: Ie6dc3b057a08603b670cb27312e5f0d989426e6c
Reviewed-on: http://openocd.zylin.com/431
Tested-by: jenkins

build: cleanup src/target directory

Change-Id: Ia055b6d2b5f6449a38afd0539a8c66e7d7e0c059
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/430
Tested-by: jenkins

build: cleanup src/jtag/drivers directory

Change-Id: I99c08ec0132d5a15250050e718310f1ddd9fe546
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/425
Tested-by: jenkins

checkpatch: remove __packed and __aligned checks

These checks are specific to linux kernel.

Change-Id: Ia9b837b5609922a897822f1d55f96f04c0f1f838
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/424
Tested-by: jenkins

build: cleanup src/jtag directory

Change-Id: I7caf57ca3d9dfbe152504472a6bb26c2a28b92e8
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/423
Tested-by: jenkins

checkpatch: increase line length to 120

Change-Id: I963385d0a4880f2b1e55208c8dfe65c1870ac6e1
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/422
Tested-by: jenkins

build: cleanup src/flash/nor directory

Change-Id: Ic299de969ce566282c055ba4dd8b94892c4c4311
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/420
Tested-by: jenkins

build: cleanup src/flash/nand directory

Change-Id: I21bb466a35168cf04743f5baafac9fef50d01707
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/419
Tested-by: jenkins

build: cleanup src/flash directory

Change-Id: I33c32a884095cff139546f760bc8fa6586e8c5b0
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/417
Tested-by: jenkins

build: cleanup src/rtos directory

Change-Id: I24bc62d12409dbfc20a0a986acf6b3f2c913e36d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/416
Tested-by: jenkins

build: cleanup src/helper directory

Change-Id: I71a312df783995e9083c345c25e73902d5aef59e
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/415
Tested-by: jenkins

checkpatch: remove volatile check

We may enable this again - but at the moment is causing extra issues
with reformatting the codebase.

Change-Id: I5a2aaaa32ad784e011dff3079ff45501452c1819
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/414

checkpatch: remove typedef check

We may enable this again - but at the moment is causing extra issues
with reformatting the codebase.

Change-Id: Ic64310a20605a0ef3206caa15c8e6c8ee655bfda
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/413
Tested-by: jenkins

build: cleanup src/server directory

Change-Id: I6410df28c5999f5cbee2d3bcaa02469a29ea4c15
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/412
Tested-by: jenkins

build: cleanup src/transport directory

Change-Id: If73da1a7272602314f042c3e3c0e61050530998d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/411
Tested-by: jenkins

build: cleanup src/xsvf directory

Change-Id: I5325980b240fba841d8cce81985f4da369ad9052
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/410
Tested-by: jenkins

build: cleanup src/svf directory

Change-Id: If9186964e2597f8ca1f01885fc28418df7d92964
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/409
Tested-by: jenkins

build: cleanup src/pld directory

Change-Id: I9edb027c76e5d7fe21d557a11e6a9691fa581e86
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/408
Tested-by: jenkins

build: cleanup src/ directory

Change-Id: Ia6ed99ce75625ad6ef5e0d3c3bbdc1c1bec21df3
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/407
Tested-by: jenkins

build: update uncrustify config

This config has been updated for 0.59

Change-Id: If0dc87dd5de052c1228743a196a3198dbd4bc279
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/406
Tested-by: jenkins

STLINK: add check for the supported jtag API version

This patch add a validation for the supported jtag api version.

Change-Id: I0b51350e58e351d6662f4039c0a9e9d0d79ba4ec
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/405
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

stm32f1x: fix bug in flash loader and restrict instruction set to armv6-m

Correct the offset to the read pointer when clearing it on error.

Also restrict the instruction set to armv6-m so the flash driver can be
used on Cortex-M0 parts with the same flash controller.

Change-Id: I380f9dabcc41fb6e4d43a7e02f355e2381913f39
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/399
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

target: increase chunk size in dump_image

Replace the big stack-allocated buffer with a much bigger heap-allocated.
There was no explanation for the apparently arbitrary chunk size, and
performance was improved by increasing it, leveling out at about 4k.

Change-Id: I3b06d4469092ec8d89d0ce05bff0b7cf213c5062
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/404
Tested-by: jenkins
Reviewed-by: Marti Bolivar <mbolivar@leaflabs.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

STLINK: add stlink v1 configuration

Change-Id: I6b9de16879ff928d60e3c4a64731449275291cc2
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/397
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

STLINK: Test device version (v1/v2) on usb transfers and add sg support

This patch test the device version and differentiate between
v1 and v2 devices.

Change-Id: Ie79bf2c5534211493b004329fb6d5b9d4ea5453b
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/396
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

STLINK: swd transport renamed and jtag+swim transport added

This patch add jtag support to the stlink driver add
two new transport types, JTAG and SWIM.

Change-Id: I7089d74250330be5c6a01c24066307641df7d11e
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/393
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

cfg: correct Stellaris LM3S811 config typo

This only effects the older Stellaris LM3S811 kits (rev B and below).

Change-Id: Ie068cce7748fede9e7113ea63a69c96222c809fa
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/401
Tested-by: jenkins

flash: fix stellaris class regression

for some reason the following commit was incorrect
769064de4bd8fc59804c37a418b83fcdba6fd36f

Only the Sandstorm and Fury class should write this register.

Change-Id: Ie18f1da6e9b59fb99cca47aa93c7f2fee447ccea
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/400
Tested-by: jenkins

stlink: add missing memory check handlers

Change-Id: I502575ab77c0c87ffebb56ec3d78905f7fcf7cc5
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/398
Tested-by: jenkins

flash: cleanup/reformat fm3 flash driver

Signed-off-by: Fujitsu FM3 Application Team <openocd.fseu@de.fujitsu.com>
Change-Id: Iaf0bacfa5438a0213a65a3d60e7d461965a5a1ac
Reviewed-on: http://openocd.zylin.com/249
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

NAND: Misleading report of erased blocks

For example, when blocks 2 and 3 were erased, openocd reported "erased blocks 2 to 4". That should be "2 to 3", I think.

Change-Id: Icece63dedd3dd931b70fa73616819a19572e39de
Signed-off-by: Timo Ketola <timo@exertus.fi>
Reviewed-on: http://openocd.zylin.com/385
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

i.MX25: Set OOB size (MXC NFC)

SPAS register (OOB size) is left wrong after reset with respect to 2KiB page NAND chip. That will lead to ECC errors after 'reset halt'.

Change-Id: If5a4685cb8d6be35879453951611ef1059da219c
Signed-off-by: Timo Ketola <timo@exertus.fi>
Reviewed-on: http://openocd.zylin.com/384
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

i.MX25: Add support for i.MX25 NAND Flash Controller

This patch is based on Erik Ahlén's work on i.MX35 NFC support. Basically it redefines the CCM.RCSR register which is in a different address in i.MX25.

Change-Id: Ia6faf9cb5efae5e564b72ef9a9b7c7f8bfde3ce0
Signed-off-by: Timo Ketola <timo@exertus.fi>
Reviewed-on: http://openocd.zylin.com/383
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

cfg: add missing Stellaris Blizzard info

Change-Id: I1d6fb9a2ec8d87267a266f68c01ce032450e45d5
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/392
Tested-by: jenkins

flash: update stellaris_set_flash_timing for target class

stellaris_set_flash_timing should only be used for Sandstorm and Fury
device classes.

Change-Id: Ib5eff9d954c039f2c5726a8ecc3ee45d1694cfd3
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/389
Tested-by: jenkins

flash: cleanup stellaris device class detection

read the target class during probe and save for later use.

Change-Id: Ib3ad20edc7d206b7f434bdcc6b947e6a5f06dd1f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/388
Tested-by: jenkins

stlink: better handle target reset/events

This makes the stlink target use the std armv7m_arch_state giving
consistent OpenOCD output.

Added debug entry handler so we get debug entry reason.

Change-Id: Ia3c1380fd5033a8e541b0d45a7c3559f1b05957d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/379
Tested-by: jenkins

stlink: enable cortex special reg writes

Change-Id: I5aa02e8de6dd5ac5a6ca628ba4068decb200c689
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/378
Tested-by: jenkins

cleanup: rename armv4_5 to arm for readability

Nothing more than a name change, just to make reading
the code a bit simpler.

Change-Id: I73a16b7302b48ce07d9688162955aae71d11eb45
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/390
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

flash: print bank usage on failure

This makes use of the newly introduced usage field in the flash bank
structure.

Also remove the assertion if usage field is null and
lets print a DEBUG_LOG message instead.

Change-Id: I384bf0e2c444fcc99deef73aec9ef01149a91c76
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/391
Tested-by: jenkins

flash: add missing stellaris device classes

This adds missing classes to the stellaris flash driver.

Change-Id: I90f2218479e5eb60950046fef04429b9529f7ddf
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/382
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

doc: Update patch procedure

Change-Id: I3e50357b4ddaf483712bbac68b6427b31529f666
Signed-off-by: Timo Ketola <timo@exertus.fi>
Reviewed-on: http://openocd.zylin.com/387
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

target: move regmaps to armv7m.c

This move will enable use to share with regmaps with the stlink target.

Change-Id: If8f41c7c53323d5074cb22ec3440530c1e402004
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/377
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

cmd: add missing usage vars

we should have caught them all - hopefully.

Change-Id: I35435317fccaf5ad0216244d69f76db6857bb582
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/381
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

build: fix broken make distcheck

0a4b27ec4bcb303547af68490f007d65a00bff02 commit forgot to update required
distcheck files.

Change-Id: I3a5b94d4548c02cb9c1fc371a6fdcc2a3854e9c7
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/380
Tested-by: jenkins

u8500: linux rtos config

Change-Id: I21a9dcc5fb260095aed2217e467b74ebecb39afb
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/349
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

rtos : linux awareness

Change-Id: I41294ccaa4a3cd253919c8b1b558205903bcb695
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/348
Tested-by: jenkins
Reviewed-by: Heythem Bouhaja <heythem.bouhaja-nonst@stericsson.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

rtos : create qsymbol interface and add str_to_hex interface

Change-Id: I1b26f7efd3ad4a060f772dd12408e77a03d93cea
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/347
Tested-by: jenkins
Reviewed-by: Evan Hunter <evan@ozhiker.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

rtos : receive reset info

Change-Id: I03c64f50eed9bec43303bf47ac1f226a0e8dbd53
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/346
Tested-by: jenkins
Reviewed-by: Evan Hunter <evan@ozhiker.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

rtos : ps command

Change-Id: I1b00b6d72f425826c33b0df7dd63114ce642ce93
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/345
Tested-by: jenkins
Reviewed-by: Evan Hunter <evan@ozhiker.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

rtos : smp support

Change-Id: I583cddf5e62ed77f108786a085569ab8699ad50d
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/344
Tested-by: jenkins
Reviewed-by: Evan Hunter <evan@ozhiker.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

rtos : current_threadid move to rtos context

Change-Id: I49d9d6d64c418be601d8723cb3eea9c3716ecb6b
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/343
Tested-by: jenkins
Reviewed-by: Evan Hunter <evan@ozhiker.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

rtos :introduce possible overload by rtos of gdb_thread_packet

Change-Id: I17381b581556fa75098a84699dbbf69423fe20eb
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/342
Tested-by: jenkins
Reviewed-by: Evan Hunter <evan@ozhiker.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

rtos : remove unused parameter

Change-Id: I98c9f28a0085bd4713b694181ab544777091eac6
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/341
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

cfg: fix typo in str730.cfg

Change-Id: Ie0222b68b3d8dd21726ac4f0cd4106da0e0456dd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/376
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins

stlink: handle wrong initialization file if no layout was specified

This patch remove the hardcoded default layout and return an error
if no layout was specified in the configuration file.

Change-Id: I0e7833faa2dc194e727122840bcbdacd321cc4fd
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/369
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

stlink: add none 32bit memory read/write functions

This patch add none 32bit memory read/write  functions.

Change-Id: Ie3a761cf006249b30d0691d1ea167d69a012c36a
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/367
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

stlink: add read/write 8bit memory

This patch add layout api funtions and implementation
to read/write 8bit memory.

Change-Id: I8d145eb07e5afa9ce1830578e57d80a80d21e7dc
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/366
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

build: fix broken commit

fixes commit 04fe2ca5547f76686c7dc555f90510eed6fcc551

Change-Id: Id7fcb82fa1a445f1df21b8d98e945f7c0e08ec93
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/375
Tested-by: jenkins

stlink: correctly signal stlink_interface_open failure

give the user a error msg on open failure.

Change-Id: If4a57bac7f3e1746c2a05c7a96747a38da188041
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/368
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>

flash: stm32f2x incorrectly using 512 as max family size

Change-Id: I2bac348c6d0baabd3d88335c5aa0a318ef66653a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/353
Tested-by: jenkins

flash: detect stm32f4x device id errata

This allows us to detect a device arrata where the device id returned is
incorrect.

This issue only effects stm32f4x Rev A silicon.

Change-Id: Ic9f4985f9abf562f97322dcf484199f0a4eb01bb
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/354
Tested-by: jenkins

cmd: add missing usage var

Change-Id: I0f05d643b0801b19cc3beb88f0d12d7e4c83ef9c
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/356
Tested-by: jenkins

stlink: add dummy speed handlers

Change-Id: I0445be7867637728145941b06225dc0acc5380e8
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/355
Tested-by: jenkins

flash: use correct device_id mask

The stm32 drivers have been using 0x7ff as the DEV_ID mask, this should
have been 0xfff.

Change-Id: I232469620969d6dd1b9a2a2aa15ec18b947dbb05
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/352
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

optimize: replace while loop by memcpy

There is no need to use a while loop here. This patch simple copy
the last bytes with the system function.

Change-Id: Ibda72dca449746efeba5a1af2e45c5990f9cf347
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/364
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

build: remove unused variables

detected by clang.

Change-Id: Id9effcc5437870f37fecd33803f7753c6eca53d6
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/361
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Mathias Küster <kesmtp@freenet.de>

flash: pre-check flash unlock for stm32f2x

add checking of the current flash lock status before performing the unlock sequence (which would fail in an unlocked state)

Change-Id: I693294c9cd2f59e69cb5bf3338120052fd680b1e
Signed-off-by: Bruno FLEURETTE <bruno.fleurette@gmail.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/363
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>

xsvf: fix clang warning

clang reports 'Function call argument is an uninitialized value'.

Change-Id: I50f4a7932b59930a5f1e3ece70b12c59e85ea3c6
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/360
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

target: fix missing semihosting return path

bug nicely caught by clang.

Change-Id: I7abf0fdd76666fb3eb1c83e3edfd01e0da485ffe
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/359
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

flash: support stm32f4x flash

This uses the same controller as the stm32f2x family.

Change-Id: I931a9ceb0cd1219514d14b8b59475179e543dd0f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/338
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>

flash: use stm32f2x flash size register

Use the flash size register to calculate flash info.

Change-Id: Ia230db8a08d440710c030a9e5001f20561c9f420
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/337
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>

docs: add initial st-link info

Change-Id: I213bf26dec582fd8e273e604d43a6e849599dd50
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/340
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>

contrib: add stlink udev rules

Change-Id: I3f11de8abfaf8821311a7aa0fd237006de3c2792
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/333
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>

cfg: add stlink pseudo stm32 targets

Change-Id: I71253c2090162b1214bbbb37396735bb9128f920
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/334
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

cfg: use consistent chipname

Change-Id: I41e0788f830d5ece13e6231a99d5b4013c9c678f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/331
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

docs: fix doxygen build

This fixes issues with newer versions of doxygen

Change-Id: Id5d3287857cb154e26064b4ce37f6b72117d5254
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/350
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

rtos: fix bug in error handling

checking for != ERROR_FAIL is broken.

Change-Id: Id7085afac653bb9c38d08928227a9ea402d8e6e9
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/351
Tested-by: jenkins
Reviewed-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

docs: whitespace fixes

Change-Id: I9c6c7017ce3077bb131a05ea9b53a115506c94d9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/339
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

Change return value on error.

On wrong parameters a error is signalized to the calling function.

Change-Id: I484443fdb39938e20382edc9246d5ec546a5c960
Signed-off-by: Mathias K <kesmtp@freenet.de>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/282
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

stlink: update to use ERROR_COMMAND_SYNTAX_ERROR

Change-Id: I21b669b09df65b56659d2f057cf389ba7b1cecfa
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/335
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>

flash: introduce .usage field for nand and nor flash driver structure

Change-Id: I47e7ec8fa8c70d2addc3aa52d7c97e9e1e7bb662
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/301
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

retire ERROR_INVALID_ARGUMENTS and replace with ERROR_COMMAND_SYNTAX_ERROR

Change-Id: I6dee51e1fab1944085391f274a343cdb9014c7a4
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/300
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

command: print BUG warning when usage is missing

These error messages will prompt patches to be submitted for missing
.usage or empty fields. All of the below must be resolved before next
release.

The Jim defined commands are excluded from this checklist because the
help text can be set later than during command registration.

strlen(.usage) == 0 means that the command expects no arguments.

Updates to this patch in Gerrit to fix problems below are most
welcome. Anyone can push updated versions of a patch to Gerrit. If
there are no further updates to this patch within a week, it will be
pushed to the master branch to prompt more fixes.

These were caught by launching OpenOCD.

Error: BUG: command 'command' does not have the '.usage' field filled out
Error: BUG: command 'script' does not have the '.usage' field filled out
Error: BUG: command 'power_restore' does not have the '.usage' field filled out
Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out
Error: BUG: command 'measure_clk' does not have the '.usage' field filled out
Error: BUG: command 'exit' does not have the '.usage' field filled out
Error: BUG: command 'shutdown' does not have the '.usage' field filled out
Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out
Error: BUG: command 'interface_list' does not have the '.usage' field filled out
Error: BUG: command 'target' does not have the '.usage' field filled out
Error: BUG: command 'target init' does not have the '.usage' field filled out
Error: BUG: command 'flash' does not have the '.usage' field filled out
Error: BUG: command 'flash init' does not have the '.usage' field filled out
Error: BUG: command 'flash banks' does not have the '.usage' field filled out
Error: BUG: command 'nand' does not have the '.usage' field filled out
Error: BUG: command 'nand drivers' does not have the '.usage' field filled out
Error: BUG: command 'nand init' does not have the '.usage' field filled out
Error: BUG: command 'pld' does not have the '.usage' field filled out
Error: BUG: command 'pld init' does not have the '.usage' field filled out
Error: BUG: command 'mflash' does not have the '.usage' field filled out
Error: BUG: command 'mflash init' does not have the '.usage' field filled out
Error: BUG: command 'dummy' does not have the '.usage' field filled out
Error: BUG: command 'dummy foo' does not have the '.usage' field filled out
Error: BUG: command 'scan_chain' does not have the '.usage' field filled out
Error: BUG: command 'jtag' does not have the '.usage' field filled out
Error: BUG: command 'jtag init' does not have the '.usage' field filled out
Error: BUG: command 'arm' does not have the '.usage' field filled out
Error: BUG: command 'arm reg' does not have the '.usage' field filled out
Error: BUG: command 'etm' does not have the '.usage' field filled out
Error: BUG: command 'arm7_9' does not have the '.usage' field filled out
Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out
Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out
Error: BUG: command 'arm reg' does not have the '.usage' field filled out
Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out
Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out
Error: BUG: command 'target_request' does not have the '.usage' field filled out
^C
oyvind@fierce:~/openocd$ openocd -c "interface dummy" -f board/at91eb40a.cfg 2>&1 | grep -w BUG
Error: BUG: command 'command' does not have the '.usage' field filled out
Error: BUG: command 'script' does not have the '.usage' field filled out
Error: BUG: command 'power_restore' does not have the '.usage' field filled out
Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out
Error: BUG: command 'measure_clk' does not have the '.usage' field filled out
Error: BUG: command 'exit' does not have the '.usage' field filled out
Error: BUG: command 'shutdown' does not have the '.usage' field filled out
Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out
Error: BUG: command 'interface_list' does not have the '.usage' field filled out
Error: BUG: command 'target' does not have the '.usage' field filled out
Error: BUG: command 'target init' does not have the '.usage' field filled out
Error: BUG: command 'flash' does not have the '.usage' field filled out
Error: BUG: command 'flash init' does not have the '.usage' field filled out
Error: BUG: command 'flash banks' does not have the '.usage' field filled out
Error: BUG: command 'nand' does not have the '.usage' field filled out
Error: BUG: command 'nand drivers' does not have the '.usage' field filled out
Error: BUG: command 'nand init' does not have the '.usage' field filled out
Error: BUG: command 'pld' does not have the '.usage' field filled out
Error: BUG: command 'pld init' does not have the '.usage' field filled out
Error: BUG: command 'mflash' does not have the '.usage' field filled out
Error: BUG: command 'mflash init' does not have the '.usage' field filled out
Error: BUG: command 'dummy' does not have the '.usage' field filled out
Error: BUG: command 'dummy foo' does not have the '.usage' field filled out
Error: BUG: command 'scan_chain' does not have the '.usage' field filled out
Error: BUG: command 'jtag' does not have the '.usage' field filled out
Error: BUG: command 'jtag init' does not have the '.usage' field filled out
Error: BUG: command 'arm' does not have the '.usage' field filled out
Error: BUG: command 'arm reg' does not have the '.usage' field filled out
Error: BUG: command 'etm' does not have the '.usage' field filled out
Error: BUG: command 'arm7_9' does not have the '.usage' field filled out
Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out
Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out
Error: BUG: command 'arm reg' does not have the '.usage' field filled out
Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out
Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out
Error: BUG: command 'target_request' does not have the '.usage' field filled out

Change-Id: I2c3e529530a15d2295a1950ffc59e8f2fc661012
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/299
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

build: fix make dist

add missing files to distribution after previous commit.

Change-Id: I0e4b278c090c71d15dd059b6755c9821427cc8ab
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/332
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>

Add STM32F2X/STLINK target config file.

Change-Id: I02161fa05da993b5b966c31a706667d1bd91935d
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/287
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

Add STLINK/V2 interface config file.

Change-Id: I6df27ce619a5938ef854ff89bf76c6de4e122204
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/286
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

STM32 ST-LINK target initial release

STM32 ST-LINK target  added.

Change-Id: Ibe2b7a3c0d5a8cf73d8680d6019adbdb62d68fa2
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/279
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

ST-LINK USB initial release

ST-Link USB support added.

Change-Id: I2812646f2895b1529ff3f911edbdce7fa0051c8f
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/261
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

Make jim functions public accessible.

Change this 2 functions to make it accessible for other tcl interfaces.

Change-Id: Idee07fcc779941b037a05a40c021e3fb0b1a4a7a
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/277
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>