zwelch [Tue, 2 Jun 2009 07:05:54 +0000 (07:05 +0000)]
Continue clean-up of JTAG driver interface:
- Move all interface_jtag_* functions to jtag_driver.c.
- Extern command queue routines in jtag.h (with INCLUDE_JTAG_INTERFACE_H).
- Add new source file to automake inputs.
zwelch [Tue, 2 Jun 2009 06:49:53 +0000 (06:49 +0000)]
More JTAG interface driver cleanup:
- Moves references to global jtag interface to default core implementation.
- Missed this reference in the earlier "pointless" patch. Mea culpa.
Important: this has a side-effect. Previously, the error return inside
the interface routine short-circuited the remainder of that function
when 'init' has not been called. With this patch, the command queue
will be cleared in the case that 'init' has been called. Since that
case indicates a buggy script, this does not seem to be a problem.
zwelch [Tue, 2 Jun 2009 06:33:19 +0000 (06:33 +0000)]
More JTAG interface driver cleanup:
- Add jtag_callback_queue_reset() to reset the callback queue.
- Make interface_jtag_execute_queue() use new helper function.
zwelch [Tue, 2 Jun 2009 06:21:49 +0000 (06:21 +0000)]
More JTAG interface driver cleanup:
- Make interface_jtag_execute_queue call new helper function.
- Add default_interface_jtag_execute_queue to wrap jtag interface access.
This patch may look useless on its own, but it helps to isolate the core
JTAG variables from the interface_jtag_* routines, so the later can be
moved into jtag_driver.c in a pending patch.
zwelch [Tue, 2 Jun 2009 05:47:00 +0000 (05:47 +0000)]
Clean up jtag command queue handling:
- Rename last_command_pointer as next_command_pointer, because this variable
stores the address where jtag_queue_command() will store a command pointer.
- Make that variable static, since it is only used internally in jtag.c.
- Remove superfluous accessor for that now-static variable.
- Deobfuscate use of variables in jtag_command_queue.
- Add jtag_command_queue_reset helper function.
- Use it in interface_jtag_execute_queue.
zwelch [Tue, 2 Jun 2009 03:38:50 +0000 (03:38 +0000)]
Start clean-up of JTAG driver interface:
- Factor jtag_add_scan_check to call new jtag_add_scan_check_alloc helper.
- Use conditional logic to define two versions of the helper.
- These helpers will be moved to other files in future patches.
zwelch [Mon, 1 Jun 2009 23:30:58 +0000 (23:30 +0000)]
David Brownell <david-b@pacbell.net>:
Make the TCL "drscan" and "irscan" commands finish in RUN/IDLE
unless the user specifies otherwise ... usually they'd choose
something like DRPAUSE or IRPAUSE, avoiding RUN/IDLE.
The current "end" state is whatever the preceding commands left
in "cmd_queue_end_state", which to TCL scripts isn't knowable.
This change should forestall various surprises/bugs.
Also check that any "end" state specified is safe in case this
adapter's JTAG clock is free-running. For now, just issue a
warning; eventually a hard failure is probably correct.
zwelch [Mon, 1 Jun 2009 23:09:19 +0000 (23:09 +0000)]
David Brownell <david-b@pacbell.net>:
Remove two sections about deprecated/removed commands, documenting
them briefly in the chapter on deprecated/removed commands. The
"working_area" command just duplicated text; "jtag_device" wasn't
listed in that chapter before.
Also start de-emphasizing those commands. Don't index them, and
include a disclaimer that their documentation may start to vanish
about a year after the code does (e.g. in January 2010).
zwelch [Mon, 1 Jun 2009 03:06:11 +0000 (03:06 +0000)]
David Brownell <david-b@pacbell.net>:
Various updates, mostly small/formatting changes:
* Small content tweaks:
- Re-title: "OpenOCD User's Guide".
- For users, URLS for latest doc and SparkFun forum
- Mention GIT-SVN
* Fix some front-matter goofage, matching texinfo docs:
- "paragraphintent" location matters
- put release version/date description with the copyright
* Fix some other stuff matching texinfo docs:
- no tabs
- tweak some refs and anchors
* whitespace-at-end-o-line fixes
zwelch [Mon, 1 Jun 2009 03:05:59 +0000 (03:05 +0000)]
David Brownell <david-b@pacbell.net>:
Split out OSK5912 board support from the omap5912 target config, and make
it pass sanity checks on my (Rev C/original) hardware:
- Fix syntax error ("-irlen" not "irlen")
- Provide real TAP ids for the ARM926ejs and the C55x dsp
- Label both CPUs appropriately (DSP, ARM)
- List both flash chips
The scan chain looks like this (note truncated DSP instruction code):
zwelch [Sun, 31 May 2009 12:38:28 +0000 (12:38 +0000)]
Final step in isolating target_type_s structure:
- Move definition of 'struct target_type_s' into new 'target_type.h' file.
- Forward delclaration remains in target.h, with comment pointing to new file.
- Replaces #define with #include in source files.
zwelch [Sun, 31 May 2009 12:10:57 +0000 (12:10 +0000)]
Whitespace-only updates to automake input files:
- use continuations to break long lines of variable assignments
- makes these variables more patch-friendly and conform to style guide
zwelch [Sun, 31 May 2009 11:32:28 +0000 (11:32 +0000)]
First step in hiding target_type_s from public interface:
- Add DEFINE_TARGET_TYPE_S symbol in files that need it defined.
- Forward declare 'struct target_type_s' only, unless that symbol is defined.
zwelch [Sun, 31 May 2009 11:30:59 +0000 (11:30 +0000)]
Add target_get_gdb_reg_list wrapper:
- replaces all calls to target->type->get_gdb_reg_list.
- add documentation in target_s to warn not to invoke callback directly.
zwelch [Sun, 31 May 2009 09:39:04 +0000 (09:39 +0000)]
Add target_bulk_write_memory wrapper:
- replaces all calls to target->type->bulk_write_memory.
- add documentation in target_s to warn not to invoke callback directly.
zwelch [Sun, 31 May 2009 09:38:43 +0000 (09:38 +0000)]
Add wrappers for target->type->examined:
- replace all checks of target->type->examined with target_was_examined().
- replace all setting of target->type->examined with target_set_examined().
- replace clearing of target->type->examined with target_reset_examined().
- add documentation in target_s to warn not to access field directly.
zwelch [Sun, 31 May 2009 09:38:20 +0000 (09:38 +0000)]
Add target_run_algorithm wrapper:
- replaces all calls to target->type->run_algorithm.
- add documentation in target_s to warn not to invoke callback directly.
zwelch [Sun, 31 May 2009 09:37:57 +0000 (09:37 +0000)]
Add target_write_memory wrapper:
- replaces all calls to target->type->write_memory.
- add documentation in target_s to warn not to invoke callback directly.
zwelch [Sun, 31 May 2009 09:37:35 +0000 (09:37 +0000)]
Add target_read_memory wrapper:
- replaces all calls to target->type->read_memory.
- add documentation in target_s to warn not to invoke callback directly.
zwelch [Sun, 31 May 2009 06:00:28 +0000 (06:00 +0000)]
Simplify the handle_md_command routine in target.c:
- fix buffer overrun in mdw; final '\0' would overflow the output buffer.
- return ERROR_COMMAND_SYNTAX_ERROR instead of ERROR_OK if:
- less than one argument is provided
- the command is called with a name other than mdb, mdh, or mdw.
- factor all command output into new handle_md_output function
zwelch [Sun, 31 May 2009 01:07:43 +0000 (01:07 +0000)]
Peter Denison <openwrt@marshadder.org>:
The debugging code in jlink_tap_execute() called when _DEBUG_USB_COMMS_ is
defined was using the entire cached scan length to print the results
buffers, and not the correct length of each individual buffer.
zwelch [Sat, 30 May 2009 23:57:30 +0000 (23:57 +0000)]
Eliminate duplicated code in the handle_mw_command memory write loop.
- wordsize will always be 1, 2, or 4 due to preceeding switch statement.
- move call to keep_alive after successful writes, not upon failures
zwelch [Sat, 30 May 2009 22:23:12 +0000 (22:23 +0000)]
Encapsulate the global "jtag" jtag_interface pointer:
- Add jtag_interface_quit, factored from exit_handler() in openocd.c.
- Remove its extern declaration.
- Add static keyword to its definition.
zwelch [Sat, 30 May 2009 01:43:21 +0000 (01:43 +0000)]
David Brownell <david-b@pacbell.net>:
Provide basic documentation on the ARM ETM and ETB trace commands.
Fix minor goofs in registration of the ETM commands; and whitespace
issues in the proof-of-concept oocd_trace code. (Plus include a
ref to Dominic's email saying that it's just proof-of-concept code.)
Note that I'm still not sure whether the ETM support works. But
documenting how it's expected to work should help sort out which
behaviors are bugs, which will help get bugs patched.
ZW: whitespace changes were split out of this patch but will follow.
zwelch [Sat, 30 May 2009 01:32:19 +0000 (01:32 +0000)]
David Brownell <david-b@pacbell.net>:
Make it so the magic "reset_config" keywords can be provided in any
order. This eliminates needless error paths, and makes it easier
to define things at the right level (adapter, board, target).
It also includes two other behavioral changes:
(1) When "handle_reset_config" sees a parameter error, it
exits without changing anything. This is best viewed
as a bugfix. (Old behavior: restore defaults, even if
they weren't previously active.)
(2) Only the behaviors that were explicitly specified get
changed. (Old behavior: everything else gets reset to
the "default".) So for example you can now specify SRST
drive requirements without saying anything about the
three unrelated topics you previously had to specify.
That second one might cause confusion for any configs that end
up calling "reset_config" twice, so it will deserve to be called
out in the release notes. (There were no such configurations in
the current OpenOCD source tree.)
Update docs accordingly. Note that at least some versions of
the texi-to-html tools can't handle "@xref{with spaces}", but
those work properly in PDF and in the info files.
zwelch [Fri, 29 May 2009 04:00:51 +0000 (04:00 +0000)]
Add documentation to flash.h:
- provides low-level information about each flash API interface,
- gives driver authors some documentation about the driver interface,
- updated extensively from the original patch provided by Duane Ellis.
zwelch [Fri, 29 May 2009 01:33:04 +0000 (01:33 +0000)]
David Brownell <david-b@pacbell.net>:
Provide basic documentation for some of the other flash drivers.
avr ... looks incomplete, may work with one AVR8 microcontroller
ecosflash ... can't find docs
lpc288x ... an NXP part, driver seems lpc2888-specific
ocl ... some arm7/arm9 thing, can't find docs
pic32mx ... looks incomplete, for PIC32MX (MIPS 4K) devices
tms470 ... for TI TMS470 parts
Still seems to be mostly arm7tdmi... several of these have no
users in the current tree.
zwelch [Thu, 28 May 2009 23:13:32 +0000 (23:13 +0000)]
David Brownell <david-b@pacbell.net>:
Start converting the architecture-specific commands to @deffn format,
reviewing against the code.
* armv4_5 disassemble ... now documented; although Jazelle code
is not handled
* It's "armv4_5 core_state" not "core_mode"; although Jazelle state
is not handled
* arm7/9 "debug" commands ... now with other arm7_9 commands, no
longer in a separate section
* arm926ejs cp15 ... previous description was broken, it matched
the code for arm920t instead
* Have separate subsections for ARMv4/ARMv5, ARMv6, and ARMv7; the
latter are new
* Move core-specific descriptions into sub-subsections under those
architectures; XScale and ARM11 descriptions are new
The new XScale and ARM11 command descriptions surely need elaboration
and review. ARM CP15 operation descriptions in general seem to be
confused and incomplete.
zwelch [Thu, 28 May 2009 01:18:47 +0000 (01:18 +0000)]
David Brownell <david-b@pacbell.net>:
Continue updating the NOR flash coverage to use @deffn syntax, so the
commands have more consistent presentation and formatting. This
reorganizes information and updates its presentation, except where
the information didn't really match the code.
This patch updates the main commands, and finishes making the section
structure parallel the NAND presentation. Of note:
- The "flash fill[whb] addr value length" commands are now documented.
- The "flash bank" command is now presented much earlier
- Explicit mention is made that NOR flash should be read using just
standard memory access commands, like "mdw" and "dump_image".
zwelch [Thu, 28 May 2009 01:11:10 +0000 (01:11 +0000)]
David Brownell <david-b@pacbell.net>:
Start updating the NOR flash coverage to use @deffn syntax, so the
commands have more consistent presentation and formatting. This
reorganizes information and updates its presentation, except where
the information didn't really match the code.
This patch updates most of the driver specific support, creating one
new (and alphabetized!) section just for driver-specific data, where
previously that data was split over up to three sections. Of note:
- The at91sam7 docs were a bit out of date with respect to the code.
- The "str9xpec" stuff still deserves some work. For now, it sits
in its own subsection; pretty messy.
- Likewise the "mflash" stuff. That's a parallel infrastructure,
and is now in a section of its own.
- The "mass_erase" commands for the Cortex M3 chips got turned into
footnotes. IMO, they should vanish sometime; they're superfluous.
- There are still a bunch of undocumented NOR drivers. Examples:
avr(8), tms470, pic32mx, more.
Plus there are a handful of minor tweaks to the NAND docs (to help make
the NOR and NAND presentations be parallel); the "Command Index" has
been renamed as the "Command and Driver Index"; reference TI instead
of Luminary Micro in several places.
zwelch [Thu, 28 May 2009 00:47:30 +0000 (00:47 +0000)]
David Brownell <david-b@pacbell.net>:
Fix a bunch of PDF generation bugs in the texi:
* The "overfull" warnings are basically complaints about lines
that are too long, so they ran off the right margin of the
PDF documentation and turn into a "black blot".
* The "underfull" warnings are basically complaints about lines
that look ugly when they get filled, because the tokens are
so long that the line-break algorithm can't do anything good.
In a few cases the simplest fix seemed to be to use more appropriate
texi commands.
In other cases the fix was a content bugfix: "ocd_" not "openocd_";
and many of those "target variants" actually aren't recognized.
kc8apf [Wed, 27 May 2009 20:30:17 +0000 (20:30 +0000)]
Author: Nicolas Pitre <nico@cam.org>
- Silence errors about keep_alive() not being called frequently enough unless
a gdb session is active or debugging is enabled
zwelch [Wed, 27 May 2009 15:15:06 +0000 (15:15 +0000)]
Numerous minor updates and fixes for The Manual:
- Link Scripting Overview into the TCL Primer; both need more work.
- Remove redundant OpenOCD from Scripting Overview subpage title.
- Fix incorrect tag in Doxygen style guide example.
- Fix minor typo in first introductory paragraph of main page.
zwelch [Wed, 27 May 2009 07:49:58 +0000 (07:49 +0000)]
Update build system to find moved scripts -- Step 3 of 2:
- Update references from using PKGLIBDIR to PKGDATADIR.
- Update built-in script search paths to reflect new install location:
- $(pkgdatadir) => $(pktdatadir)/site
- $(pkglibdir) => $(pktdatadir)/scripts
- Update installed location of httpd files:
- $(pkglibdir)/httpd => $(pkgdatadir)/httpd
zwelch [Wed, 27 May 2009 06:44:43 +0000 (06:44 +0000)]
Move TCL script files -- Step 1 of 2:
- Move src/target/{interface,target,board,test}/ into src/tcl/
- Remove existing rules in src/Makefile.am and src/target/Makefile.am.
- Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am:
- Add dist-hook to include such files under src/tcl in the distribution.
- Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.
- Add uninstall-hook to remove the installed script files.
- Change paths to (un)install script files in '$(pkgdatadir)/scripts'.
zwelch [Tue, 26 May 2009 23:58:01 +0000 (23:58 +0000)]
Update Doxygen markup in PATCHES, BUGS, and TODO:
- In the File List, these files are listed and link to empty pages.
- This patch adds @file blocks to reference the pages each file contains.
- Remove redundant "OpenOCD" from PATCHES title; it clutters the tree view.
zwelch [Tue, 26 May 2009 01:27:56 +0000 (01:27 +0000)]
SimonQian <simonqian@SimonQian.com>, reported by R.Doss:
This patch fixes a segfault when TDO was not received in XXR command:
- allocate space for the value and mask anyway
- clear the mask to zero to effectively skip the output comparison step
zwelch [Tue, 26 May 2009 00:23:23 +0000 (00:23 +0000)]
David Brownell <david-b@pacbell.net>:
Update the "Reset Configuration" information in the User's guide:
- Convert to @deffn syntax
- Move tutorial text from command descriptions into new sections
- Describe several different types of JTAG-visible reset
- Expand descriptions of configuration tweaks for SRST and TRST
- Link to the "reset" command, and vice versa
- Bugfix the "reset_config" description (it didn't match the code)
Plus, be more proscriptive: do it in board config files, except for
the oddball cases where that won't work. (Current target.cfg files
seem to have much goofage there; several seem board-specific.)
zwelch [Sun, 24 May 2009 21:13:29 +0000 (21:13 +0000)]
David Brownell <david-b@pacbell.net>:
Doc (mostly) update for jtag_khz:
- switch to @deffn syntax
- add entry for "jtag_rclk"
- move deprecated "jtag_speed" into collection of deprecated calls
And for ft2232, don't be the only adapter to *log* an error if RTCK
is requested; it's already reported properly, like any other nonfatal
command parameter. "jtag_rclk" just works as expected, without any
scarey messages.
zwelch [Sun, 24 May 2009 21:08:42 +0000 (21:08 +0000)]
David Brownell <david-b@pacbell.net>:
Make startup for the various server ports be quiet, unless
debugging is active: don't emit needless scarey messages.
Update the relevant documentation and its references:
- For these port commands ... cover the default values;
convert to @deffn syntax; include their use outside of
the configuration stage; and alphabetize.
Similar updates to the rest of that small chapter:
- Highlight that there even *IS* a configuration stage, after
which some command functionality is no longer available.
- For GDB commands ... convert to @deffn syntax; alphabetize;
include a missing command (!); add missing helptext (!) for
one non-missing command; update relevant cross-references
and index entries.
zwelch [Sun, 24 May 2009 20:57:53 +0000 (20:57 +0000)]
David Brownell <david-b@pacbell.net>:
The "Illegal mode for command" diagnostic is deeply useless.
Say "Command '%s' only runs during configuration stage" instead,
letting users know what the real issue is.
zwelch [Sun, 24 May 2009 02:08:17 +0000 (02:08 +0000)]
Nicolas Pitre <nico@cam.org>: Update sheevaplug interface script:
When the CPU is in the WFI state, the JTAG interface simply doesn't
respond at all and initial tap examination simply fails. Let's simply
do it again when we come around to assert nSRST.
zwelch [Sun, 24 May 2009 01:57:13 +0000 (01:57 +0000)]
David Brownell <david-b@pacbell.net>:
Update two oddball NAND commands to work with {offset, length}
instead of block numbers, matching the other commands as well
as usage in U-Boot and the Linux-MTD utilities.
Document them accordingly. Update the single in-tree use of
those commands (sheevaplug).
ALSO:
(a) Document the current 2 GByte/chip ceiling for NAND chipsize.
(32 bit offset/length values can't represent 4 GBytes.) Maybe
after the upcoming release, the code can switch to 64-bits.
(b) The "nand check_bad_blocks" should report "bad" blocks. They
are not "invalid" blocks; they're "bad" ones.
(c) Tweak the "nand info" command to handle the "no arguments"
case sanely (show everything, instead of showing garbage) and
not listing the blocksize in hex kbytes (duh).
zwelch [Sun, 24 May 2009 01:38:19 +0000 (01:38 +0000)]
David Brownell <david-b@pacbell.net>:
NAND support for DaVinci-family drivers, with HW ECC support.
Declare the NAND chip on the DM355 EVM board.
Currently tested on DM355 for Linux interop using the standard
large page (2KB) chip in the EVM socket; "hwecc1" and "hwecc4"
work fine. (Using hwecc4 relies on patches that haven't quite
made it through the Linux-MTD bottlenecks yet.)
Not yet tested: 1-bit on small-page (although it's hard to see
how that could fail); 4-bit on small page (picky layout issues);
the "hwecc_infix" mode (primarily for older boot ROMs; testing
there is blocked on having new bootloader code).
zwelch [Sun, 24 May 2009 01:33:54 +0000 (01:33 +0000)]
Fix two problems with openocd.texi:
- Fix minor issues with xrefs not liking parentheses around them.
- Change 'Building' section to 'Building OpenOCD'. It reads better.
zwelch [Sun, 24 May 2009 01:08:16 +0000 (01:08 +0000)]
Properly fix doxygen out-of-tree build process:
- move Doxyfile to Doxyfile.in: type 'make Doxyfile' to recreate it
- create Doxyfile from Doxyfile.in with make rule:
- use sed substitution of $(srcdir) to location directories
- delete all doxygen created files with 'make distclean'
- include all required files (including logger.pl) in distribution
zwelch [Sun, 24 May 2009 00:47:49 +0000 (00:47 +0000)]
SimonQian <simonqian@SimonQian.com>:
Changes svf_check_tdo function (checks tdo output matches desired values):
- call buf_cmp_mask function to do comparison instead of using a loop.
- fixes a bug when data length is equal to sizeof(int).
projects / openocd / log