at91sam7: fix warnings by removing dead assignments

Change-Id: I836038b3518e617291ac7d5d255a388d9486f67f
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/180
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

buspirate: add missing error propagation

found by clang.

Change-Id: I80ea8e6afc8dcc1aa7edb6f63af0d94f6781b81c
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/182
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

warning fix: remove unused variable assignment

Change-Id: I8c73b0f9a6a10734e539eedcedd79e1a34122f60
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/185
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

em357: fix warning by removing unused local variables

Change-Id: I9def63d36ed4fa8bf9cdeeedc18b1b25d0e487d6
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/184
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

usbprog: fix unecessary and confusing assignment

clang found silly code that was trivially fixed.

Change-Id: Ied6c1b254c1823cd111140cbe0c8a03d2ede65fb
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/186
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

flash: update luminary device table

add support for checking target against the device CLASS rather
then just the PARTNO.

This change also adds the new LM4F family (Blizzard).

Change-Id: Ia9d1e33f1f1c2817c0039a2232ecf932fae072f9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/161
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

arm7_9: remove warnings by reducing scope of variables

Change-Id: Idc384b733056a72108680b073da7c327a8eeedc3
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/179
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

at91sam7: add a new target config file for at91sam7x512

The main difference with at91sam7x256 is the declaration of the second
bank of flash.

Change-Id: I87a20dcbb639b797799139ccf46cc73934fa3b9e
Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-on: http://openocd.zylin.com/173
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

disassembly: fix access to undefined memory pointer upon unknown instruction

return error message instead. Found by clang.

Change-Id: Ica109d077206236a12d007e77cc78061ffd05834
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/169
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

xsvf: add missing error propagation

Change-Id: Ibc70deb980d6d18ceb376b72d9104e6180b16acf
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/176
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

dsp5680xx: fix warnings

- propagate error
- remove dead assignment

Change-Id: I0d7078f531d96e421e95f08bfd908e818500d74c
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/170
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

str9x: explain compiler that a local variable will always be initialized

Change-Id: I9ddb2793b4cdbf6acea6f69973531491e4ebcc5b
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/145
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

at91sam3: fix warnings

- reduce scope of variables
- assert on post condition to fix clang warning

Change-Id: Id91038f73a632f9688ba52c9c34eae923626e770
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/160
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

str7x: fix error propagation

stick to convention of "retval" being used as error value to
be propagated and use "flash_flags" local variable for flash
flags read from how.

Change-Id: I63f1f2248b4f4538d6cd7634ae277f7c0aadc346
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/178
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

target config files: Fix whitespace issues.

Drop useless double-space occurences, drop trailing whitespace, and fix
some other minor whitespace-related issues.

Change-Id: I6b4c515492e2ee94dc25ef1fe4f51015a4bba8b5
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/137
Tested-by: jenkins

ecos: add missing error propagation

Change-Id: Ib34815c9cf654517f22486a7c8001fdb7471338c
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/174
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

xscale: cleanup

- fix error propagation
- add some debug output for "unused" variables
- reduce scope of variable to avoid "unread" variables.

Change-Id: I136995f2a043102e64b8fff3017502fae564013b
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/175
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

warning fix: add self-consitency check to remove warning

verify promise of code that more code can be pasted with an
assert at the end condition of the code passage that builds
string.

Change-Id: I76a4e5f91b9142fff932e1493cb43c29eb6a0f80
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/143
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

cfi: fix gaffe in fixing warnings

introduced reading garbage value for arm32.

Change-Id: Ib5792a8a3207ee4db6d01d354df98c3cfabce037
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/162
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

tools: fix permissions

Change-Id: I9419138dd2972304daf215594ca917ac8eb7fcda
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>

tools: add checkpatch script

execute from openocd root dir after commiting change but before
pushing to gerrit.
tools/checkpatch.sh

This is the same script used by the jenkins build server to validate
a change.

Change-Id: Ib40d44b160e1c50a5e47ab55fc48a554381ea763
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/167
Tested-by: jenkins

etm: fix warning by removing assignment that is immediately overwritten

Change-Id: Ia3a83d3c1fc3a1707d69017fce6cf142a81babc4
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/165
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

cortex_m: initialize unused CPU variables to 0 for poll info output

fixes warnings.

Change-Id: I1a9ec09083d4e6269889fb79e6121f25e83eb396
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/163
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

dsp5680xx: add missing and broken error propagation

found by clang.

Change-Id: Ie7e2ecad71bf0838ece93727e4778ad368b890ef
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/156
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

at91sam9: fix broken error propagation

Change-Id: I3288ce6f7642e519c26dd099be888a395fe1de94
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/159
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

avr32_regs: add missing error propagation

Change-Id: Ie8b141dd534d73eccfc045069d5f628bd1eea88e
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/166
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

interface configs: Add missing URLs and names.

Also, drop author name from interface/hilscher_* files, that info is in the
git log, and none of the other files contain author names either.

Change-Id: Idf0eb4279c4bff31d15c166619c0bf8b1c5bb877
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/138
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

HACKING: all you need is http access

Change-Id: I191c1da5126c4c9ea1ff8826576b6b24feaf9881
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/157
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

checkpatch: increase line length warning to 100

Change-Id: Ief0445ea6581929b3ffdcf8bc644ce5f27b392c4
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>

tools: add checkpatch script

Change-Id: I3579028fc1c6ee8bea58c82e5f0eecba7794d7cb
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>

gdb_server: assert to avoid malloc(0)

Change-Id: I6ae3e007f4aa768f8bc64de78351750138f12e53
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/135
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

cfg: add Stellaris LM4F232 Evaluation Kit config

Change-Id: Ica754897bef6573a0738ed1afdfe1dfda07292fd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/151
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

cfg: add Blizzard class to stellaris.cfg

Change-Id: I2a1320c696b6d9b070e4a927c4cd4d68178af751
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/150
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

tx27stk5: add board init support for KaRo TX27 CPU module

This patch adds support for a KaRo TX27 CPU module on a StarterkitV base board.
The register settings have been extracted from a RedBoot distribution
that is distributed along with the hardware by KaRo.

This setup has been tested with a JTAGKey. The testing has been focussed
on loading a program into memory and start execution.
Although the flash seems to be correctly detected, no effort has been put
in testing the NAND programming yet.

Change-Id: Ib17763f1e3ecacd0eb9b5fdc32f8cba7a5e59be5
Signed-off-by: Mark Vels <mark.vels@team-embedded.nl>
Reviewed-on: http://openocd.zylin.com/158
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

fix warning: remove assigned to variable

variable is subsequently not used

Change-Id: I177d21c6ba9f1f2e3765feffdbf317ea375a8cfe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/149
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

cortex_a: add missing error propagation

found by clang.

Change-Id: I50eac219d7540fd48d3285f3f213cb659492d0c0
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/153
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

usbtoxxx: remove warning by reducing scope of variable

Change-Id: Icc3cfe601082cd83ad1c8818c1e21e7ada014150
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/154
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

arm11: print next address to debug

fixes clang warning. Basically the next address pointer is not
used for anything in the fn, except to be examined in debug.

Change-Id: I253519b8e49e54490bbe7da8ec3d2dd31f49052a
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/155
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

cortex_m: add missing error checking

found by clang.

Change-Id: I099c6fe6b044dba36c20221cb439bdcba5a6bb6f
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/152
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

target: fix null pointer exception

check if no target is selected and return error.

Change-Id: Ie8abb63c708d09572b45e88fc6766af108715077
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/148
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

flash: add Stellaris Blizzard class

Change-Id: I83f0d6edf3ab31d9fa86682f20cec77dc47ba2f6
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/146
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

target: rename cortex_m3.[ch] to cortex_m.[ch]

This rename is in preparation for cortex_m4 support.

Change-Id: Ic08c298ec6ed2aabc2c39db67191f68b3a51f550
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/147
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

warning fix: remove senseless assignment before bailing out of fn w/error

Change-Id: I822f3adce0eccb880007673d60c7eccf7d36b398
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/144
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

warnings: null pointer check fix

rewrite broken null pointer check code by reducing scope
of variable.

Change-Id: I8254f6849b187e5c9cd083053cdc11973c6fe339
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/142
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

cfi: unsupported code paths now report and return error

found by clang, would have done something undefined and mysterious
later on.

Change-Id: If7d7aca8514575d229ed0b17378bf8b1bbf347c4
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/133
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

bugfixes: tinker a bit with the targets command

return error when target can not be found instead of ERROR_OK,
split fn.

Change-Id: Iba5232d3862a490d0995c3bfece23685bd6856e3
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/131
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

dsp563xxx: fix missing error propagation found by clang

Change-Id: I7380ce145b4942e21b174f2a810928a877c32bc7
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/140
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

interface configs: Fix whitespace and other issues.

Change-Id: I98825c7fb9bdee75b69b06005ed12a3f64ec4db4
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/139
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

config files: Drop incorrect comments.

There are many "force an error till we get a good number" comments in
target/board files. This refers to the use-case where a config script
sets _CPUTAPID to 0xffffffff (which presumely gets overridden later):

 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
    # Force an error until we get a good number.
    set _CPUTAPID 0xffffffff
 }

However, the same comment was also copy-pasted in many files which do
_not_ set _CPUTAPID to 0xffffffff, where the comment doesn't make any
sense at all. Drop those comments. Also, add one missing comment, and
fix small whitespace and grammar issues.

Change-Id: Ic4ba3b5ccba87ed40cea0d6a7d66609fbdfa3c71
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/136
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

clang: fix warning by adding assert that shows that a variable is used

Change-Id: I26e0ba9f1ae9d43c9a14c42c4225746782dc4d66
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/134
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

Fixes comment typo for page size

Change-Id: I6dd8aadcecd680c48e696aeec0daf74d2addbb05
Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
Reviewed-on: http://openocd.zylin.com/132
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

bugfixes: numerous bugs in error propagation found by clang

Change-Id: I784068325b422d1918e28c08544bc5a1332d712f
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/130
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

clang: fix warning about missing check for return value

Change-Id: I0c6b6b8d1f0c30b6a503cb98df30584252bc0ee1
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/129
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

Remove use of undefined variable.

Change-Id: Id8fd345438c360b2a42857525f05360ce2794d21
Signed-off-by: Jim Norris <u17263@att.net>
Reviewed-on: http://openocd.zylin.com/127
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins

clang: fix warning about use of unitialized variable

this was a false positive, silence it.

Change-Id: I432e0c466c94cf8fd6bbf0ea153c8501a8a261eb
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/126
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

Add configuration for ATMEL SAM3N-EK board.

Change-Id: I525f6c346cace4e54f47659c5a7aceb29ee4baf2
Signed-off-by: Jim Norris <u17263@att.net>
Reviewed-on: http://openocd.zylin.com/125
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

Add configuration for ATMEL SAM3N series.

Change-Id: Iac498ab37e59127b989f29a1c4167ab29d625b05
Signed-off-by: Jim Norris <u17263@att.net>
Reviewed-on: http://openocd.zylin.com/124
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

stm3220g_eval.cfg: fix CHIPNAME.

The STM3220G-EVAL board has an STM32F207IGH6. ("...H6", not "...T6").

Change-Id: Iaf3dae6830c5c0685a1dcd1588d391434bc51be7
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
Reviewed-on: http://openocd.zylin.com/120
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

armv7a: fix scan-build warnings

"Value stored to 'retval' is never read": Check and propagate error
"Dereference of null pointer": Probably bogus, maybe triggered by the null
check on armv7a, so remove the check since it can't be null anyway.

Change-Id: I3bc44e52af1589ff40e6a42deda0ce7f3a25e397
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/119
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

armv7a: make local functions static

Also fix a spelling error and remove the declaration for a non-existent
function from the header.

Change-Id: I13177e2d81aa167c05c1cc766f06924211e6d735
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/118
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

armv7m: improve error handling

Propagate errors unchanged.
Free allocated working area in the error return path.
Remove duplicated cleanup code by rewriting the logic.
As a side-effect, fixes a scan-build warning.

Change-Id: I80e3c0015be672778f916e998c8c2e4f23d7588c
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/117
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

Fix "Evaluate 'script' in the global scope"

This fixes commit Evaluate 'script' in the global scope. It caused
Windows builds behave differently than before because path was evaluated twice
and backslashes from Windows' paths got unescaped and effectively wiped out.
Configs could only be passed with "-f ../dir/config.cfg" or "-f
..\\dir\\config.cfg" instead of usual "-f dir/config.cfg" (or using backslash)
as previously.

Change-Id: I13b4abac6dbe6d770cc11a4e61c9421ef340da83
Author: Steve Bennett <steveb@workware.net.au>
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/40
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

warning: silence gcc by initializing local variables

GCC doesn't understand that these are in fact initialized if they are
used.

Change-Id: I01988adb0547f785b48d869ddbe44cc17dca4739
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/116
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

SERVER: fix clang warning

The fix is inline with the Linux coding style that forbids
assignment in if condition

Change-Id: I0b9d0b419d9c8b7a8c755e048d5faf72d1658ba2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/87
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

cfg: Add interface config for Dangerous Prototypes BusBlaster

The BusBlaster from Dangerous Prototypes is based on the FTDI FT2232H IC.
It has a CPLD between the FT2232H and the JTAG header allowing it to
emulate various debugger types. It comes configured as a JTAGkey compatible
device.

Change-Id: Iab56907bf67ded87001e628d93012f1e16287d90
Signed-off-by: Richard Barlow <richard@richardbarlow.co.uk>
Reviewed-on: http://openocd.zylin.com/53
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

NOR/CORE: fix clang warning

The fix is inline with the Linux coding style that forbids
assignment in if condition

Change-Id: I10338a249bcfeff87d8596f7e17f209e26b41678
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/86
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

NAND/CORE: fix clang warning

The fix is inline with the Linux coding style that forbids
assignment in if condition

Change-Id: I42a371d6adfdf3b3fb867705211c47d89776ee2a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/85
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

FLASH/CFI: fix clang warnings

Total of 5 warnings:
3x "Dead store": removed dead assignment to variable;
1x "Dereference of null pointer": this is not an error, but a
   limited visibility of clang, since pointer erase_region_info
   is initialized inside cfi_fixup_non_cfi();
1x "Branch condition evaluates to a garbage value":
   this is a real coding bug that could issue SIGSEGV, since
   "goto cleanup" can be executed before initialization
   of "source".

Change-Id: Id3c323c82bb15cbd3bb8fc04b23541f11145f109
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/84
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

mx2: add error propagation and remove warnings

Change-Id: Idd4fb452790e5d7921a749679dbd865586e5a4a9
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/48
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

fm3: fix warning for superfluous assignment

Change-Id: I4f8e8c2e676a2728ddc6227daf9ca6a7ceb3d505
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/46
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

kinetis: fix warning about malloc(0) w/assert

Change-Id: Ib40204675bfc5429c744f9ed7e2f7098384b753d
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/47
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

tms470: remove dead assignment warning

Change-Id: I21e7ac47f80d93c9c0d7b169f8848b929c664b20
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/45
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

add Freescale Kinetis K40 devices and Kwikstik eval board

Change-Id: I4817921d09ab915c50f42651bc073690033450fe
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/51
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

clang: fix warning w/assert so that clang knows that there will be no division by zero

Change-Id: I98ac62a22f21043bb535a667a4f1f1537ccde2a4
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/42
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

clang: fix malloc() warning with assert

Change-Id: I989d2655622a9f11f4a0a2994014e42822587ecd
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/41
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

tms470: removed unnecessary operations

This should silence a warning.

Change-Id: Id91a9ebacae836083b1db2654a8e7bf24b2300e9
Signed-off-by: Edgar Grimberg <edgar.grimberg@gmail.com>
Reviewed-on: http://openocd.zylin.com/52
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

FLASH/STMSMI: fix clang "dead store" warning

Change-Id: Icfdefdc48432db2057d3fea19dc424571d2385eb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/50
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

buspirate: ignore return value and fix warning

Perhaps we could do one better and propagate the error?

Change-Id: Idc45f516c26f09de4ee01fe05e8d3475f4b80db3
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/43
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

warning: fix false positive

may be used uninitialized in this function [-Werror=uninitialized]

Change-Id: Ida2cf8efe4e7da6fd9f669b806a20894563ac3d4
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/49
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

server: remove warning due to dead assignment

Change-Id: Idb08aef0c11b3fae92286e8fcea61ab09ab09e74
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/44
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins

jim: add missing jim license

Change-Id: Ib8e34739d92cd54655b9b47d07b856a82ff25f3c
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/39
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

rtos: remove broken code for handling the deprecated qP packet

Change-Id: Icca522c1e2a2877abb20665b171c61079b1d8f48
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/37
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

rtos: return the correct value if the T or H packets are handled

Change-Id: Iea31e20ee4e35c1a9cb7b93424c92b3f38081067
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/38
Tested-by: jenkins
Reviewed-by: Evan Hunter <evan@ozhiker.com>
Reviewed-by: Peter Stuge <peter@stuge.se>

Unused variables

Fix a few errors with set and unused variables detected by GCC 4.7.0

Change-Id: I59b748e18e514ee9f0cde7883b4ed5116198bd4a
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/36
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

Updated fm3.c, added Flash type 2 support, error handling improved

Change-Id: I684aca11c4554290d0e57c6d3318d8082980c1ef
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Reviewed-on: http://openocd.zylin.com/10
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

TMPA900/910 MCUs are always little endian.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Change-Id: I8839f2cf0faf1b5ba9f99901c5ee028b199fabd2
Reviewed-on: http://openocd.zylin.com/35
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

Toshiba TMPA900 config: Fix incorrect working area.

The Toshiba TMPA900 series (TMPA900/901) only has internal RAM regions
RAM-0 (16kB) and RAM-1 (8kB) which we can use as working area.

This is probably a copy-paste error from tmpa910.cfg, which has the
correct values and sizes for the TMPA910 series (TMPA910/911/912/913):
there are RAM-0, RAM-1, and RAM-2 (each 16kB).

Also, change "built-in RAM" to "internal RAM" to match what the
datasheet uses.

Change-Id: I993cd6b7fadc28cf34e5cc18426bb2bb42597670
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/34
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

xscale: fix bug in xscale_receive()

The code in xscale_receive() that tries to skip invalid reads (i.e.
reads that don't have the DBG_SR[0] 'valid' bit set) seems to be
wrong, as it only looks at the first word's valid flag rather than
each word's own valid flag. Am I reading the code correctly? If so,
the attached patch should fix it.

If this looks correct, I'll generate a proper patch and commit message.

Matt

Change-Id: I74ebe2ad7a36d340a9dd3b8487578b6ea7f3cf1e
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/32
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

luminary: add new targets

update target support from latest SW-DRL 8049

Change-Id: I40aba4d30fe2b79fd955f466c64d99a1dfd63ecf
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/31
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>

luminary: add peripheral reset script

some luminary device classes require a reset script
to emulate a hardware reset.

Change-Id: Id505c92451244b48b0238c2130aebab2df8d208b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/30
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>

AM/DM37x: Use ICEPick warm reset and include halt when gdb connects.

Using the ICEPick reset seems to allow the processor to be halted sooner
and the halt on gdb connection makes the connect process more robust.

Change-Id: I0586f6e6becc60a729030509ef58907a19d545ec
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/23
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

ICEPick-C: Add support for warm reset through JTAG controller and provide finer detail functions.

This sets up simple functions that can later be used to provide additional
ICEPick Operations.

Change-Id: I313b8679267696fad87d23f3692963e513f2fe21
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/22
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

Add the SAM3N familly to the chip_details table

Change-Id: Ic122d324eacf6e667ed6008ebb84708be944222c
Signed-off-by: Attila Kinali <attila@kinali.ch>
Reviewed-on: http://openocd.zylin.com/29
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>

target_request: add target_got_message() that can be used to improve DCC performance

API change to allow implementing a back-off algorithm for
polling hardware.

Change-Id: I6cbe8b4534c8dfeb8442305171ea96b5481c1f17
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/26
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>

target: DCC / target message backoff algorithm

by immediately polling again when we have received a message from
the target instead of waiting 100ms, we can hope for much better
performance. More than 100x? :-)

Change-Id: Ieaf0c6c8b6e5addc482895670ffbf9a743e07a29
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/27
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>

Add some more detail for setting up Gerrit account.

1) Add a couple more steps when setting up the Gerrit account.

Change-Id: I5d81feac4650d4d28653d14cfc0baf14270424c1
Signed-off-by: Jim Norris <u17263@att.net>
Reviewed-on: http://openocd.zylin.com/28
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: Peter Stuge <peter@stuge.se>

arm-jtag-ew: whitespace cleanup

Change-Id: I8861e825f9c84525e0c09c3adaa3fe300640770d
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Reviewed-on: http://openocd.zylin.com/21
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

flash: fix lpc2000 driver typo

Change-Id: I3a759ed98a27fd186c12355b846d5e97dba86c5b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>

Add an interface file for DLP Design DLP-USB1232H.

The DLP Design DLP-USB1232H UART/SPI/JTAG module is based on an FTDI FT2232H
chip. Among other things, it can used as JTAG programmer if connected to
the JTAG target properly. I have successfully wired the module to an
Olimex STM32-H103 eval board and flashed a firmware onto that using OpenOCD.

The setup details and schematics are documented at:
http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter

Change-Id: I5eb9255a61eeece233009bee77d7dc3b5d1afb8b
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/20
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>

Add a board file for the Glyn Tonga2.

This is a Toshiba TMPA900CMXBG (ARM9) based SO-DIMM CPU module with 64MB
DDR SDRAM, 256MB NAND flash, and on-board Ethernet.

The board file provides a tonga2_init function which sets up the
PLL/clocks and memory (SDRAM and SRAM), which allows writing a boot-loader
into RAM via JTAG.

Change-Id: I60522b97997bdf50e1f25aebab910d93a98522fb
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/19
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>