haptix@web.de [Wed, 29 May 2013 16:02:46 +0000 (18:02 +0200)]
Fix wrong placement of i3bar when connecting/disconnecting outputs
When connecting or disconnecting an output, i3bar reconfigures its
windows. This also included an unmapping of the bars, and a remapping of
all docked bars. Thus, the bars were misplaced when a monitor was
disconnected.
This commit assures that the remapping of the bars only takes place,
when the mode has actually changed. This patch also takes care of an
inconsistency when pressing the bar_modifier while switching the mode.
Also, the xkbDisplay is now closed correctly, when deregestering the xkb
keyevents.
Bugfix: Unmap windows before reparenting them to the root window (fixes Mathematica) (Thanks psychon)
Some apps such as Mathematica send a synthetic UnmapNotify event without
properly unmapping their window first. This change makes sure that
happens and fixes an annoying bug with Mathematica where some unmanaged
windows would stay around, but you couldn’t do anything with them.
Thanks to psychon (current awesome maintainer) for helping with the
diagnosis!
haptix@web.de [Sat, 25 May 2013 12:30:00 +0000 (14:30 +0200)]
introduced i3 command for changing the hidden state and the mode of i3bar
The hidden_state and mode of each i3bar instance can now be controlled from within i3.
Therefore, two new i3 command were introduced:
_
bar hidden_state show|hide|toggle [<bar_id>]
show: always show the bar
hide: normal hide mode
toggle: toggle between show and hide (individually for each bar)
_
bar mode dock|hide|invisible|toggle [<bar_id>]
hide,dock: like before
invisible: always keep the bar hidden
toggle: toggle between dock and hide (individually for each bar)
This patch introduces a hidden_state ("hidden_state hide|show") in the
barconfig, which indicates the current hidden_state of each i3bar
instance. It only affects the bar when in hide mode. Additionally, a new
invisible mode was introduced. In order to change the hidden_state or
mode of the bar from i3, a barconfig-update event was introduced, for
which a bar can subscribe and the bar then gets notified about the
currently set hidden_state and mode in its barconfig.
For convenience, an id field ("id <bar_id>") was added to the barconfig, where one can
set the desired id for the corresponding bar. If the id is not specified, i3 will
deterministically choose an id; otherwise, with the previous random approach for finding
a new id, which is actually not shared with i3bar, as it would determine its id on
startup, the event-subscription would be destroyed on reload. Still, this issue remains
when manually changing the bar_id in the config and then reloading.
haptix@web.de [Fri, 24 May 2013 13:02:04 +0000 (15:02 +0200)]
Fix problem when moving fullscreen window to scratchpad
When moving a fullscreen window to scratchpad with 'move scratchpad', the
focused window would stay fullscreen.
Also, when having a container in fullscreen mode and then focusing a child of
this container and moving it to scratchpad, it would enable fullscreen for
the child window.
This patch fixes both problems, so the scratchpad window is always floating.
Diego Ongaro [Mon, 29 Apr 2013 08:14:11 +0000 (01:14 -0700)]
Draw indicator border only for split layouts
In order to distinguish split layouts from tabbed/stacking layouts when
only one window is shown, do not draw the indicator border for tabbed or
stacking layouts.
Thomas Adam [Sun, 12 May 2013 16:49:23 +0000 (17:49 +0100)]
i3bar: Fix pixel offset calculation in dual-head
When running i3bar on a dual-head display with workspaces enabled in i3bar's
config, the second monitor wouldn't use a correct x position offset and
would draw its label too close to the screen's edge. In comparison to the
first monitor, this is inconsistent because that starts with a pixel offset
of 1.
Without this fix, children of i3bar would inherit the file descriptor of
the IPC connection to i3. Therefore, even if i3bar exits with SIGSEGV,
the connection to i3 stays open. Because nobody actually reads any
messages by i3, the buffer will fill up and i3 can’t deliver any more
messages, and thus busy-loops at that point.
raise fullscreen windows on top of all other X11 windows
Note that this is ineffective for dunst’s notifications because dunst
re-raises them as soon as they get obscured. It does work for dzen2
however, which was the original use-case.
tabbed: floor(), put extra pixels into the last tab (Thanks xeen)
This is the only sane way I can think of to deal with the problem that
the screen size may not be dividable by the amount of tabbed children
(e.g. 1280 / 41 = 31.219512…).
enkore [Thu, 21 Mar 2013 10:48:27 +0000 (11:48 +0100)]
Add click events to i3bar
If the statusline generator (i.e. i3status) specifies click_events:true
in the protocol header, i3bar will write a JSON array on it's stdin
notifying it if the user clicks on a block.
The exact protocol is documented in docs/i3bar-protocol.
Yuxuan Shui [Fri, 15 Mar 2013 14:40:26 +0000 (22:40 +0800)]
Fix restarting with 32bit depth windows (v5)
What I do in this patch is:
1. Split the con_new() function, so I can create a Con without actually
create a window.
2. Store the depth of Cons in the layout file when i3 is restarting.
oblique [Tue, 26 Feb 2013 00:37:35 +0000 (02:37 +0200)]
Add support for _NET_WM_STATE_DEMANDS_ATTENTION.
_NET_WM_STATE_DEMANDS_ATTENTION indicates that some action in or with
the window happened. It's a weaker hint than urgency flag of WM_HINTS,
but some applications and almost all Qt applications use it instead of
WM_HINTS' urgency flag (one example is Skype).
András Mohari [Mon, 25 Feb 2013 16:09:10 +0000 (17:09 +0100)]
Bugfix: Set separator color properly when drawing
Set the colors in the GC directly since set_font_colors() does not do it
when using a Pango font, resulting in i3bar drawing separators in the
wrong color.
András Mohari [Mon, 25 Feb 2013 10:41:02 +0000 (11:41 +0100)]
Allow min_width of a block in i3bar to be a string
With this change, min_width can either be an integer (as usual), or a
string. In the latter case, the width of the text given by min_width
determines the minimum width of the block. This way one does not have to
figure out a minimum width by trial and error, only to do it again every
time the font is changed.
Mats [Wed, 20 Feb 2013 15:56:03 +0000 (16:56 +0100)]
Bugfix: Handle nested transient popups properly
During smart popup fullscreen handling, display all transient popups
that belong to the respective fullscreen application. A popup window
belongs to another window if the latter is reachable via the path
induced by the WM_TRANSIENT_FOR hints.
Added new event id (I3_IPC_EVENT_WINDOW) so that a an IPC client can
subscribe to events on windows. Added a basic window event that gets
triggered when a window gets successfully reparented. This new event
also dumps the container data, so that IPC clients can get the initial
window name. IPC clients wishing to see window events should subscribe
to 'window'.
Artem Shinkarov [Sun, 27 Jan 2013 20:27:21 +0000 (20:27 +0000)]
Separator color via config; separator width and on/off via ipc
This patch adds the following features:
1) Configure a color of the separator via config. It is done like
bar {
colors {
separator #000000
}
}
2) A block can have an integer entry "separator_block_width" which
sets the width of the gap which would follow after the current block.
3) A block can have a boolean entry "separator" and if it is set
to false, then the drawing of the separating line would be disabled.
projects / i3 / i3 / log