Tony Crisci [Sun, 22 Nov 2015 18:32:21 +0000 (13:32 -0500)]
Bug: parse con_id base 16
Mouse bindings that target the window that was clicked send the command
to the parser with `con_id` of the clicked window serialized base 16
for compatability with FreeBSD. See 7c2842e for explaination.
Set base to 0 for strtol to handle base 16 numbers for that reason.
This allows mouse bindings that target specific windows to work
correctly. Without this change, the focused window is always targetted
rather than the window that was actually clicked.
Ingo Bürk [Fri, 20 Nov 2015 23:19:49 +0000 (00:19 +0100)]
Support _NET_WM_USER_TIME.
With this patch, we support the special value "0" for _NET_WM_USER_TIME
on a window upon managing it, which indicates that the window shall not
be focused.
That commit accidentally defaulted to group mask 1, but the default
should be to match any group mask, so that having multiple layouts
loaded at the same time works.
Ingo Bürk [Wed, 11 Nov 2015 19:40:25 +0000 (20:40 +0100)]
Only grab scrollwheel buttons if necessary.
With this patch, we only grab the scrollwheel buttons (4 and 5) when
managing a window if a whole window key binding exists for these buttons.
This allows both of these usecases:
- Bindings to scrollwheel buttons using --whole-window (see #1701).
- Scrolling in a window without focusing it if no such binding
exists (see #2049).
Furthermore, we drop all button grabs and regrab them after a config
reload in order to reevaluate the new bindings correctly.
Ingo Bürk [Wed, 11 Nov 2015 19:21:26 +0000 (20:21 +0100)]
Extract function to grab buttons when managing a window.
We refactor the button grabbing into a function to allow the next patch
both to
- conditionally grab different sets of buttons
- grab the buttons again when reloading the config.
Ingo Bürk [Mon, 2 Nov 2015 14:11:21 +0000 (09:11 -0500)]
Raise dependency to cairo 1.14.4.
With the recent cairo bugfix, we can now switch to using cairo for
rendering i3bar per default by raising the minimum version of cairo
to 1.14.4, if this cairo version is available.
Ingo Bürk [Mon, 2 Nov 2015 14:21:43 +0000 (09:21 -0500)]
Remove autostart commands after they have been executed.
As there is no need to keep autostart commands in memory, we can safely
remove them as soon as they have been executed. As we previously didn't
clear them at all during config reloads, this also fixes a memory leak.
Note that neither autostarts nor autostarts_always is executed during
config reloads, so removing them from memory is fine as an i3 restart
will cause them to be parsed again.
hwangcc23 [Mon, 2 Nov 2015 14:12:44 +0000 (22:12 +0800)]
Fix config validation fail when no new line from end of file
1. i3 config validation failed when the new line is missing from the end of file.
The error was: "ERROR: Your line continuation is too long, it exceeds 4096 bytes".
It is wrong to assume that there is always a '\n' at the end of each line in the config file.
(Not for the last line.)
Fix it via adding a end-of-file check.
2. See the issue #2051. (https://github.com/i3/i3/issues/2051)
Ingo Bürk [Fri, 16 Oct 2015 09:34:19 +0000 (11:34 +0200)]
Allow multiple tray_output directives.
This patch introduces the possibility to specify the tray_output directive
multiple times. All values will be used by i3bar, in the order they are
given.
This way, a single bar configuration can be used for several machines with
internal output names "eDP1" and "LVDS-0" by specifying tray_output for both.
Any external output (e.g., "DP-0") will still not receive the tray. The same
effect can be achieved by using "primary", but forces the user to couple the
tray display to the primary output which may not be desirable behavior.
Ingo Bürk [Mon, 26 Oct 2015 17:16:21 +0000 (18:16 +0100)]
Fix crash when trying to split and float a dock container.
Since splitting a docking container was allowed and successful, the check
to prevent floating it fails to work. This causes a crash because the
workspace of the container cannot be determined as the dockarea is higher
up in the tree than the workspace it belongs to.
This patch extends to sanity check to nested dock containers when trying to
float a container and also disallows manually splitting a docked container
or changing its layout.
Ingo Bürk [Sun, 25 Oct 2015 13:27:08 +0000 (14:27 +0100)]
Mark assignment as run before executing it.
We need to store the information that an assignment was run for a window
before actually executing the command. Otherwise, if the command causes
a change that causes assignments to be run again, the window might be
matched again, causing an infinite loop and hence i3 to freeze or crash.
Ingo Bürk [Sun, 25 Oct 2015 13:25:55 +0000 (14:25 +0100)]
Fixed logging statement.
Assignments don't necessarily represent workspace assignments, but could
also be used, e.g., for no_focus. Hence, there's no point in logging
dest.workspace for all assignments.
Ingo Bürk [Sun, 25 Oct 2015 12:03:56 +0000 (13:03 +0100)]
Make resize grow|shrink width|height work for a nested split in the same direction.
Suppose a horizontally oriented workspace has two windows open. Issuing "split h" on
the right window creates a nested horizontal container. If we now resize in "width"
direction, the resize doesn't work because it will only operate on the current parent,
which is a container with only one child, so the resize command exits.
This is unexpected behavior from a user point of view. Hence, with this patch, we
ensure that we don't just go up the tree until we find a parent with the correct
orientation, but also keep going if that parent has only a single child.
Ingo Bürk [Thu, 22 Oct 2015 14:11:08 +0000 (16:11 +0200)]
Added background and border keys to the i3bar protocol.
This patch adds two new status block keys, background and border, which
define the respective colors for the status block. If not specified, the
current behavior is kept, e.g., no background / border will be drawn.
If the status block is marked urgent, the urgent color is prioritized.
Ingo Bürk [Mon, 19 Oct 2015 16:31:21 +0000 (18:31 +0200)]
Introduce "--add" for marking windows.
In order to keep compatibility to before allowing multiple marks on a window,
we introduce a flag "--add" that must be set to put more than one mark on a
window. The default, which is also available as "--replace", keeps the old
behavior of overwriting a mark when setting a new one.
Ingo Bürk [Mon, 19 Oct 2015 16:10:20 +0000 (18:10 +0200)]
Allow multiple marks on windows.
This patch allows multiple marks to be set on a single window. The restriction that a mark may
only be on one window at a time is still upheld as this is necessary for commands like
"move window to mark" to make sense.
Adaephon-GH [Wed, 21 Oct 2015 11:58:45 +0000 (13:58 +0200)]
Make rendering of key bindings more consistent
- Render key names and key bindings verbatim if they could be used like
that in the configuration (no special format for "colloquial" names:
Alt, Windows, ...)
- Use only lower case letters for key bindings
Adaephon-GH [Wed, 21 Oct 2015 11:35:52 +0000 (13:35 +0200)]
Improve placement of explicit IDs for headings
In some cases the IDs of section titles was placed after the section
title. With that in the rendered HTML the ID was placed on the paragraph
and not on the heading. This led to heading not being shown when the
corresponding link was clicked.
Adaephon-GH [Mon, 19 Oct 2015 05:39:59 +0000 (07:39 +0200)]
Fix erroneous headline for moving to mark
The headline indicated that it would be possible to move containers and *workspaces* to marks but the following text clearly shows that it should state containers and *windows*.
hwangcc23 [Fri, 16 Oct 2015 15:17:41 +0000 (23:17 +0800)]
Revise workspace next/prev
See the issue #1798 (http://github.com/i3/i3/issues/1798).
+workspace_next+ as-is cycles through either numbered or named workspaces,
but when it reaches the last numbered/named workspace, it only looks for
named workspaces. This commit changes it: look for named workspaces after
exhausting numbered ones, but also for numbered ones after exhausting
named ones.
Also add a test case 528-workspace-next-prev.t (numbered workspaces and named
workspaces on 2 outputs) for testing this.
Ingo Bürk [Wed, 14 Oct 2015 18:49:52 +0000 (20:49 +0200)]
Introduce switch for the drawing backend
This commit restores the old XCB drawing code paths while keeping the
cairo drawing available via a compile-time switch (I3BAR_CAIRO). This
is necessary as cairo currently has a bug that breaks i3bar for users
without the RENDER extension, which might be the case, e.g., for VNC
users.
For more context, see #1989 and the discussions about its fix. Once the
cairo fix is available in a stable release, i3 can depend on that version
and remove the XCB drawing code paths.
Ingo Bürk [Wed, 14 Oct 2015 17:03:05 +0000 (19:03 +0200)]
Extract cairo_clear_surface.
This commit refactors the i3bar drawing code to also define an abstraction
function for clearing a surface. This is needed to fully abstract i3bar/xcb.c's
drawing code so that we can introduce a switch to easily exchange the
underlying drawing mechanism.
Ingo Bürk [Mon, 12 Oct 2015 21:43:47 +0000 (23:43 +0200)]
Make pango markup in mode names optional with a flag.
This introduces the flag "--pango" on the mode config directive to
explicitly enable pango markup for mode names. Not setting this will
cause the mode name to be rendered as is.
This fixes a regression in 4.11 where mode names containing characters
such as '<' would break user's configs as they didn't escape these
characters.
Ingo Bürk [Mon, 12 Oct 2015 10:56:19 +0000 (12:56 +0200)]
Suppress no_focus for first window on a workspace.
With this patch, the no_focus directive will be ignored if the
to-be-opened window is the first on its workspace as there's no
reason the user would not want to focus it in this case.
This improves usability when, for example, using a tabbed
workspace_layout.
Ingo Bürk [Thu, 8 Oct 2015 10:16:25 +0000 (12:16 +0200)]
When drawing text, mark the surface as dirty.
Since libi3 currently creates its own cairo surface for drawing text, we
need to mark our own surface as dirty to force cairo to invalidate its
cache. Otherwise, this will result in graphical glitches such as the text
not showing up at all.
This wrapper can be removed in the future when libi3 is adapted to reuse
the same cairo surface as we do for all other drawing operations.
Ingo Bürk [Wed, 7 Oct 2015 09:03:18 +0000 (11:03 +0200)]
Allow text drawing to use the alpha channel.
We pass alpha channel information to the current text drawing code
and use it if it is available. The previous behavior of using full
opacity for RGB format colors is preserved.
Ingo Bürk [Mon, 5 Oct 2015 10:58:05 +0000 (12:58 +0200)]
Use 32-bit visuals for i3bar when possible and allow RGBA colors.
This patch creates all necessary windows for i3bar with 32-bit visuals if available.
It also introduces the possibility to define RGBA colors (next to RGB colors), which
allows the user to set the opacity of any color. This requires running a compositor.
With this patch we also start supporting _NET_SYSTEM_TRAY_VISUAL, which is necessary
for the tray icons so they create the tray window with the correct depth and visual.
projects / i3 / i3 / log