From bf9ba4dbb04bba885330790577ed1e67480ece86 Mon Sep 17 00:00:00 2001 From: Rick Chen Date: Tue, 20 Mar 2018 15:52:58 +0800 Subject: [PATCH] mmc: ftsdc010: Merge nds32_mmc to ftsdc010 nsd32_mmc was created to support ftsdc010 dm. It is not necessary to separate both, so merge it to ftsdc010. Signed-off-by: Rick Chen Signed-off-by: Rick Chen Cc: Greentime Hu --- drivers/mmc/Kconfig | 7 -- drivers/mmc/Makefile | 1 - drivers/mmc/ftsdc010_mci.c | 139 ++++++++++++++++++++++++++++++++++-- drivers/mmc/ftsdc010_mci.h | 10 --- drivers/mmc/nds32_mmc.c | 141 ------------------------------------- 5 files changed, 133 insertions(+), 165 deletions(-) delete mode 100644 drivers/mmc/nds32_mmc.c diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index ff987ed803..3a79cbf165 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -523,13 +523,6 @@ config STM32_SDMMC2 If you have a board based on such a SoC and with a SD/MMC slot, say Y or M here. -config MMC_NDS32 - bool "Andestech SD/MMC controller support" - depends on DM_MMC && OF_CONTROL && BLK && FTSDC010 - help - This enables support for the Andestech SD/MMM controller, which is - based on Faraday IP. - config FTSDC010 bool "Ftsdc010 SD/MMC controller Support" help diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 42113e2603..958341017c 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -42,7 +42,6 @@ obj-$(CONFIG_MMC_SANDBOX) += sandbox_mmc.o obj-$(CONFIG_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_SH_SDHI) += sh_sdhi.o obj-$(CONFIG_STM32_SDMMC2) += stm32_sdmmc2.o -obj-$(CONFIG_MMC_NDS32) += nds32_mmc.o # SDHCI obj-$(CONFIG_MMC_SDHCI) += sdhci.o diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c index 5506ef4460..9de3a1503d 100644 --- a/drivers/mmc/ftsdc010_mci.c +++ b/drivers/mmc/ftsdc010_mci.c @@ -4,23 +4,63 @@ * (C) Copyright 2010 Faraday Technology * Dante Su * + * Copyright 2018 Andes Technology, Inc. + * Author: Rick Chen (rick@andestech.com) + * * SPDX-License-Identifier: GPL-2.0+ */ #include +#include #include #include #include - #include #include #include #include #include "ftsdc010_mci.h" +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; #define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 4) /* 250 ms */ #define CFG_RST_TIMEOUT CONFIG_SYS_HZ /* 1 sec reset timeout */ +#if CONFIG_IS_ENABLED(OF_PLATDATA) +struct ftsdc010 { + fdt32_t bus_width; + bool cap_mmc_highspeed; + bool cap_sd_highspeed; + fdt32_t clock_freq_min_max[2]; + struct phandle_2_cell clocks[4]; + fdt32_t fifo_depth; + fdt32_t reg[2]; +}; +#endif + +struct ftsdc010_plat { +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct ftsdc010 dtplat; +#endif + struct mmc_config cfg; + struct mmc mmc; +}; + +struct ftsdc_priv { + struct clk clk; + struct ftsdc010_chip chip; + int fifo_depth; + bool fifo_mode; + u32 minmax[2]; +}; + static inline int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd) { struct ftsdc010_chip *chip = mmc->priv; @@ -316,20 +356,20 @@ static int ftsdc010_init(struct mmc *mmc) return 0; } -int ftsdc010_probe(struct udevice *dev) +static int ftsdc010_probe(struct udevice *dev) { struct mmc *mmc = mmc_get_mmc_dev(dev); return ftsdc010_init(mmc); } -const struct dm_mmc_ops dm_ftsdc010_ops = { +const struct dm_mmc_ops dm_ftsdc010_mmc_ops = { .send_cmd = ftsdc010_request, .set_ios = ftsdc010_set_ios, .get_cd = ftsdc010_get_cd, .get_wp = ftsdc010_get_wp, }; -void ftsdc_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth, +static void ftsdc_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth, uint caps, u32 max_clk, u32 min_clk) { cfg->name = name; @@ -348,7 +388,94 @@ void ftsdc_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth, cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; } -int ftsdc010_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg) +static int ftsdc010_mmc_ofdata_to_platdata(struct udevice *dev) { - return mmc_bind(dev, mmc, cfg); +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + struct ftsdc_priv *priv = dev_get_priv(dev); + struct ftsdc010_chip *chip = &priv->chip; + chip->name = dev->name; + chip->ioaddr = (void *)devfdt_get_addr(dev); + chip->buswidth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), + "bus-width", 4); + chip->priv = dev; + priv->fifo_depth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), + "fifo-depth", 0); + priv->fifo_mode = fdtdec_get_bool(gd->fdt_blob, dev_of_offset(dev), + "fifo-mode"); + if (fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev), + "clock-freq-min-max", priv->minmax, 2)) { + int val = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), + "max-frequency", -EINVAL); + if (val < 0) + return val; + + priv->minmax[0] = 400000; /* 400 kHz */ + priv->minmax[1] = val; + } else { + debug("%s: 'clock-freq-min-max' property was deprecated.\n", + __func__); + } +#endif + chip->sclk = priv->minmax[1]; + chip->regs = chip->ioaddr; + return 0; } + +static int ftsdc010_mmc_probe(struct udevice *dev) +{ + struct ftsdc010_plat *plat = dev_get_platdata(dev); + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); + struct ftsdc_priv *priv = dev_get_priv(dev); + struct ftsdc010_chip *chip = &priv->chip; + struct udevice *pwr_dev __maybe_unused; + +#if CONFIG_IS_ENABLED(OF_PLATDATA) + int ret; + struct ftsdc010 *dtplat = &plat->dtplat; + chip->name = dev->name; + chip->ioaddr = map_sysmem(dtplat->reg[0], dtplat->reg[1]); + chip->buswidth = dtplat->bus_width; + chip->priv = dev; + chip->dev_index = 1; + memcpy(priv->minmax, dtplat->clock_freq_min_max, sizeof(priv->minmax)); + ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &priv->clk); + if (ret < 0) + return ret; +#endif + + if (dev_read_bool(dev, "cap-mmc-highspeed") || \ + dev_read_bool(dev, "cap-sd-highspeed")) + chip->caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz; + + ftsdc_setup_cfg(&plat->cfg, dev->name, chip->buswidth, chip->caps, + priv->minmax[1] , priv->minmax[0]); + chip->mmc = &plat->mmc; + chip->mmc->priv = &priv->chip; + chip->mmc->dev = dev; + upriv->mmc = chip->mmc; + return ftsdc010_probe(dev); +} + +int ftsdc010_mmc_bind(struct udevice *dev) +{ + struct ftsdc010_plat *plat = dev_get_platdata(dev); + + return mmc_bind(dev, &plat->mmc, &plat->cfg); +} + +static const struct udevice_id ftsdc010_mmc_ids[] = { + { .compatible = "andestech,atsdc010" }, + { } +}; + +U_BOOT_DRIVER(ftsdc010_mmc) = { + .name = "ftsdc010_mmc", + .id = UCLASS_MMC, + .of_match = ftsdc010_mmc_ids, + .ofdata_to_platdata = ftsdc010_mmc_ofdata_to_platdata, + .ops = &dm_ftsdc010_mmc_ops, + .bind = ftsdc010_mmc_bind, + .probe = ftsdc010_mmc_probe, + .priv_auto_alloc_size = sizeof(struct ftsdc_priv), + .platdata_auto_alloc_size = sizeof(struct ftsdc010_plat), +}; diff --git a/drivers/mmc/ftsdc010_mci.h b/drivers/mmc/ftsdc010_mci.h index b8b8bf0961..e417360662 100644 --- a/drivers/mmc/ftsdc010_mci.h +++ b/drivers/mmc/ftsdc010_mci.h @@ -35,14 +35,4 @@ struct ftsdc010_chip { bool fifo_mode; }; - -#ifdef CONFIG_DM_MMC -/* Export the operations to drivers */ -int ftsdc010_probe(struct udevice *dev); -extern const struct dm_mmc_ops dm_ftsdc010_ops; -#endif -void ftsdc_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth, - uint caps, u32 max_clk, u32 min_clk); -int ftsdc010_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg); - #endif /* __FTSDC010_MCI_H */ diff --git a/drivers/mmc/nds32_mmc.c b/drivers/mmc/nds32_mmc.c deleted file mode 100644 index ec43e9d688..0000000000 --- a/drivers/mmc/nds32_mmc.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Andestech ATFSDC010 SD/MMC driver - * - * (C) Copyright 2017 - * Rick Chen, NDS32 Software Engineering, rick@andestech.com - - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "ftsdc010_mci.h" - -DECLARE_GLOBAL_DATA_PTR; - -#if CONFIG_IS_ENABLED(OF_PLATDATA) -struct nds_mmc { - fdt32_t bus_width; - bool cap_mmc_highspeed; - bool cap_sd_highspeed; - fdt32_t clock_freq_min_max[2]; - struct phandle_2_cell clocks[4]; - fdt32_t fifo_depth; - fdt32_t reg[2]; -}; -#endif - -struct nds_mmc_plat { -#if CONFIG_IS_ENABLED(OF_PLATDATA) - struct nds_mmc dtplat; -#endif - struct mmc_config cfg; - struct mmc mmc; -}; - -struct ftsdc_priv { - struct clk clk; - struct ftsdc010_chip chip; - int fifo_depth; - bool fifo_mode; - u32 minmax[2]; -}; - -static int nds32_mmc_ofdata_to_platdata(struct udevice *dev) -{ -#if !CONFIG_IS_ENABLED(OF_PLATDATA) - struct ftsdc_priv *priv = dev_get_priv(dev); - struct ftsdc010_chip *chip = &priv->chip; - chip->name = dev->name; - chip->ioaddr = (void *)devfdt_get_addr(dev); - chip->buswidth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), - "bus-width", 4); - chip->priv = dev; - priv->fifo_depth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), - "fifo-depth", 0); - priv->fifo_mode = fdtdec_get_bool(gd->fdt_blob, dev_of_offset(dev), - "fifo-mode"); - if (fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev), - "clock-freq-min-max", priv->minmax, 2)) { - int val = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), - "max-frequency", -EINVAL); - if (val < 0) - return val; - - priv->minmax[0] = 400000; /* 400 kHz */ - priv->minmax[1] = val; - } else { - debug("%s: 'clock-freq-min-max' property was deprecated.\n", - __func__); - } -#endif - chip->sclk = priv->minmax[1]; - chip->regs = chip->ioaddr; - return 0; -} - -static int nds32_mmc_probe(struct udevice *dev) -{ - struct nds_mmc_plat *plat = dev_get_platdata(dev); - struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); - struct ftsdc_priv *priv = dev_get_priv(dev); - struct ftsdc010_chip *chip = &priv->chip; - struct udevice *pwr_dev __maybe_unused; -#if CONFIG_IS_ENABLED(OF_PLATDATA) - int ret; - struct nds_mmc *dtplat = &plat->dtplat; - chip->name = dev->name; - chip->ioaddr = map_sysmem(dtplat->reg[0], dtplat->reg[1]); - chip->buswidth = dtplat->bus_width; - chip->priv = dev; - chip->dev_index = 1; - memcpy(priv->minmax, dtplat->clock_freq_min_max, sizeof(priv->minmax)); - ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &priv->clk); - if (ret < 0) - return ret; -#endif - - if (dev_read_bool(dev, "cap-mmc-highspeed") || \ - dev_read_bool(dev, "cap-sd-highspeed")) - chip->caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz; - - ftsdc_setup_cfg(&plat->cfg, dev->name, chip->buswidth, chip->caps, - priv->minmax[1] , priv->minmax[0]); - chip->mmc = &plat->mmc; - chip->mmc->priv = &priv->chip; - chip->mmc->dev = dev; - upriv->mmc = chip->mmc; - return ftsdc010_probe(dev); -} - -static int nds32_mmc_bind(struct udevice *dev) -{ - struct nds_mmc_plat *plat = dev_get_platdata(dev); - return ftsdc010_bind(dev, &plat->mmc, &plat->cfg); -} - -static const struct udevice_id nds32_mmc_ids[] = { - { .compatible = "andestech,atsdc010" }, - { } -}; - -U_BOOT_DRIVER(nds32_mmc_drv) = { - .name = "nds32_mmc", - .id = UCLASS_MMC, - .of_match = nds32_mmc_ids, - .ofdata_to_platdata = nds32_mmc_ofdata_to_platdata, - .ops = &dm_ftsdc010_ops, - .bind = nds32_mmc_bind, - .probe = nds32_mmc_probe, - .priv_auto_alloc_size = sizeof(struct ftsdc_priv), - .platdata_auto_alloc_size = sizeof(struct nds_mmc_plat), -}; -- 2.39.2