From 005a460a193ff1dd888db43f94c492744819a27d Mon Sep 17 00:00:00 2001 From: Kurt Zeilenga Date: Sun, 30 Jul 2000 15:18:10 +0000 Subject: [PATCH] Update slapd features and formating --- doc/guide/admin/intro.sdf | 170 ++++++++++++++++++++++---------------- 1 file changed, 99 insertions(+), 71 deletions(-) diff --git a/doc/guide/admin/intro.sdf b/doc/guide/admin/intro.sdf index 7e116c979a..b09199537f 100644 --- a/doc/guide/admin/intro.sdf +++ b/doc/guide/admin/intro.sdf @@ -4,10 +4,11 @@ H1: Introduction to slapd and slurpd This document describes how to build, configure, and run the stand-alone -LDAP daemon ({{I:slapd}}) and the stand-alone LDAP update replication -daemon ({{I:slurpd}}). It is intended for newcomers and experienced -administrators alike. This section provides a basic introduction to directory -service, and the directory service provided by {{I:slapd}} in particular. +{{TERM:LDAP}} daemon ({{slapd}}) and the stand-alone LDAP update replication +daemon ({{slurpd}}). It is intended for newcomers and experienced +administrators alike. This section provides a basic introduction to +directory services and, in particular, the directory services provided +by {{slapd}}. @@ -30,31 +31,31 @@ There are many different ways to provide a directory service. Different methods allow different kinds of information to be stored in the directory, place different requirements on how that information can be referenced, queried and updated, how it is protected from unauthorized access, etc. -Some directory services are {{I:local}}, providing service to a restricted +Some directory services are {{local}}, providing service to a restricted context (e.g., the finger service on a single machine). Other services are global, providing service to a much broader context (e.g., the entire Internet). -Global services are usually {{I:distributed}}, meaning that the data they +Global services are usually {{distributed}}, meaning that the data they contain is spread across many machines, all of which cooperate to provide the directory service. Typically a global service defines a uniform -{{I:namespace}} which gives the same view of the data no matter where -you are in relation to the data itself. The Internet {{Domain Name System}} +{{namespace}} which gives the same view of the data no matter where +you are in relation to the data itself. The Internet {{TERM[expand]DNS}} is an example of a globally distributed directory service. H2: What is LDAP? -{{I:Slapd}}'s model for directory service is based on a global directory +{{slapd}}'s model for directory service is based on a global directory model called {{TERM:LDAP}}. LDAP stands for {{TERM[expand]LDAP}}. LDAP is a directory access protocol that runs over -{{TCP/IP}}. The nitty-gritty details of LDAP are defined in +{{TERM:TCP}}/{{TERM:IP}}. The nitty-gritty details of LDAP are defined in {{REF:RFC2251}} "The Lightweight Directory Access Protocol (v3)." This section gives an overview of LDAP from a user's perspective. -{{I:What kind of information can be stored in the directory?}} +{{What kind of information can be stored in the directory?}} The LDAP information model is based on {{entries}}. An entry is a -collection of attributes that has a globally-unique {{distinguished -name}} (DN). +collection of attributes that has a globally-unique +{{TERM[expand]DN}} (DN). The DN is used to refer to the entry unambiguously. Each of the entry's attributes has a {{type}} and one or more {{values}}. The types are typically mnemonic strings, like "{{EX:cn}}" for common @@ -64,7 +65,7 @@ be the value {{EX: Babs Jensen}}. A {{EX:mail}} attribute might contain the value "{{EX:babs@openldap.org}}". A {{EX:jpegPhoto}} attribute would contain a photograph in the JPEG (binary) format. -{{I:How is the information arranged?}} +{{How is the information arranged?}} In LDAP, directory entries are arranged in a hierarchical tree-like structure. Traditionally, this structure reflected the geographic and/or organizational boundaries. Entries representing countries @@ -87,20 +88,20 @@ FT[align="Center"] Figure 1.2: LDAP directory tree (Internet naming) In addition, LDAP allows you to control which attributes are required and allowed in an entry through the use of a special attribute called -{{I:objectClass}}. The values of the {{I:objectClass}} attribute -determine the {{I:schema}} rules the entry must obey. +{{objectClass}}. The values of the {{objectClass}} attribute +determine the {{schema}} rules the entry must obey. -{{I:How is the information referenced?}} +{{How is the information referenced?}} An entry is referenced by its distinguished name, which is constructed -by taking the name of the entry itself (called the relative distinguished -name, or RDN) and concatenating the names of its ancestor entries. For +by taking the name of the entry itself (called the {{TERM[expand]RDN}} +or RDN) and concatenating the names of its ancestor entries. For example, the entry for Barbara Jensen in the Internet naming example above has an RDN of {{EX:uid=babs}} and a DN of {{EX:uid=babs, ou=People, dc=OpenLDAP, dc=com}}". The full DN format is described in {{REF:RFC2253}}, "Lightweight Directory Access Protocol (v3): UTF-8 String Representation of Distinguished Names." -{{I:How is the information accessed?}} +{{How is the information accessed?}} LDAP defines operations for interrogating and updating the directory. Operations are provided for adding and deleting an entry from the directory, changing an existing entry, and changing the @@ -119,7 +120,7 @@ string {{EX:Acme}} in their name, and that have a fax number. LDAP lets you do this too. The next section describes in more detail what you can do with LDAP and how it might be useful to you. -{{I:How is the information protected from unauthorized access?}} +{{How is the information protected from unauthorized access?}} Some directory services provide no protection, allowing anyone to see the information. LDAP provides a method for a client to authenticate, or prove its identity to a directory server, paving the way for rich @@ -128,7 +129,7 @@ access control to protect the information the server contains. H2: How does LDAP work? -LDAP directory service is based on a {{I:client-server}} model. One or more +LDAP directory service is based on a {{client-server}} model. One or more LDAP servers contain the data making up the LDAP directory tree. An LDAP client connects to an LDAP server and asks it a question. The server responds with the answer and/or with a pointer to where the client can @@ -141,51 +142,77 @@ a global directory service, like LDAP. H2: What is slapd and what can it do? -{{I:Slapd}} is an LDAP directory server that runs on many different +{{slapd}} is an LDAP directory server that runs on many different platforms. You can use it to provide a directory service of your very own. Your directory can contain pretty much anything you want to put in it. You can connect it to the global LDAP directory service, or run a service all by yourself. Some of slapd's more interesting features and capabilities include: -{{B:Choice of databases}}: {{I:Slapd}} comes with a variety of different -backend databases you can choose from. They include LDBM, a high-performance -disk-based {{embedded}} database; SHELL, a database interface to arbitrary -shell scripts; and PASSWD, a simple password file database. +{{B:LDAPv2}} and {{B:LDAPv3}}: {{slapd}} supports both version 2 and 3 +of the {{TERM[expand]LDAP}}. {{slapd}} provides support +for the latest features while maintaining interoperability with existing +clients. {{slapd}} supports both IPv4 and IPv6 protocols. -{{B:Multiple database instances}}: {{I:Slapd}} can be configured to serve -multiple databases at the same time. This means that a single {{I:slapd}} -server can respond to requests for many logically different portions -of the LDAP tree, using the same or different backend databases. +{{B:{{TERM[expand]SASL}}}}: {{slapd}} supports +strong authentication services through the use of SASL. {{slapd}}'s +SASL implementation utilizes {{PRD:Cyrus}} software which supports +a number of mechanisms including DIGEST-MD5, EXTERNAL, and GSSAPI. -{{B:Generic database API}}: If you require even more customization, -{{I:slapd}} lets you write your own backend database easily. {{I:Slapd}} -consists of two distinct parts: a front end that handles protocol -communication with LDAP clients; and a backend that handles database -operations. Because these two pieces communicate via a well-defined -C API, you can write your own customized database backend to {{I:slapd}}. -A number of {{programmable}} backends are also provided. +{{B:{{TERM[expand]TLS}}}}: {{slapd}} provides privacy and +integrity protections through the use of TLS (or SSL). {{slapd}}'s +TLS implementation utilizes {{PRD:OpenSSL}} software. -{{B:Access control}}: {{I:Slapd}} provides a rich and powerful access +{{B:Access control}}: {{slapd}} provides a rich and powerful access control facility, allowing you to control access to the information in your database(s). You can control access to entries based on -LDAP authentication information, IP address, domain name and other criteria. - -{{B:Threads}}: {{I:Slapd}} is threaded for high performance. A -single multi-threaded {{I:slapd}} process handles all incoming -requests, reducing the amount of system overhead required. {{I:Slapd}} -will automatically select the best thread support for your platform. - -{{B:Replication}}: {{I:Slapd}} can be configured to maintain replica -copies of its database. This master/slave replication scheme is -vital in high-volume environments where a single {{I:slapd}} just -doesn't provide the necessary availability or reliability. +LDAP authorization information, {{TERM:IP}} address, domain name +and other criteria. +{{slapd}} supports both {{static}} and {{dynamic}} access control +information. + +{{B:Internationalization}}: {{slapd}} supports Unicode and language +tags. + +{{B:Choice of databases}}: {{slapd}} comes with a variety of different +backend databases you can choose from. They include +{{TERM:LDBM}}, a high-performance disk-based {{embedded}} database; +SHELL, a database interface to arbitrary shell scripts; and +PASSWD, a simple password file database. LDBM utilizes either +{{PRD:BerkeleyDB}} or {{PRD:GDBM}}. + +{{B:Multiple database instances}}: {{slapd}} can be configured to serve +multiple databases at the same time. This means that a single {{slapd}} +server can respond to requests for many logically different portions +of the LDAP tree, using the same or different backend databases. -{{B:Configuration}}: {{I:Slapd}} is highly configurable through a +{{B:Generic modules API}}: If you require even more customization, +{{slapd}} lets you write your own modules easily. {{slapd}} +consists of two distinct parts: a front end that handles protocol +communication with LDAP clients; and modules which handles specific +tasks such as database operations. Because these two pieces communicate +via a well-defined C API, you can write your own customized modules +which extend {{slapd}} in numerous ways. Also, a number of +{{programmable database}} modules are provided. These allowing you +to expose external data sources to {{slapd}} using popular programming +languages ({{PRD:Perl}}, {{Shell}}, {{PRD:SQL}}, and {{PRD:TCL}}. + +{{B:Threads}}: {{slapd}} is threaded for high performance. A +single multi-threaded {{slapd}} process handles all incoming +requests, reducing the amount of system overhead required. + +{{B:Replication}}: {{slapd}} can be configured to maintain replica +copies of its database. This {{single-master/multiple-slave}} +replication scheme is vital in high-volume environments where a +single {{slapd}} just doesn't provide the necessary availability +or reliability. {{slapd}} +also includes experimental support for {{multi-master}} replication. + +{{B:Configuration}}: {{slapd}} is highly configurable through a single configuration file which allows you to change just about everything you'd ever want to change. Configuration options have reasonable defaults, making your job much easier. -{{I:Slapd}} also has its limitations, of course. The main LDBM +{{slapd}} also has its limitations, of course. The main LDBM database backend does not handle range queries or negation queries very well. These features and more will be coming in a future release. @@ -193,33 +220,34 @@ very well. These features and more will be coming in a future release. H2: What about X.500? -Technically, LDAP is a directory access protocol to an X.500 directory -service, the OSI directory service. Initial LDAP servers were -were gateway between LDAP and the X.500 Directory Access Protocol (DAP). -DAP is a heavyweight protocol that runs over a full OSI stack and -requires a significant amount of computing resources to run. LDAP -runs directly over TCP and provides most of the functionality of DAP -at a much lower cost. +Technically, LDAP is a directory access protocol to an {{TERM:X.500}} +directory service, the {{TERM:OSI}} directory service. Initial +LDAP servers were were gateway between LDAP and the X.500 +{{TERM[expand]DAP}} (DAP). +DAP is a heavyweight protocol that runs over a full OSI protocol stack +and requires a significant amount of computing resources to run. +LDAP is designed to operate over {{TERM:TCP}}/{{TERM:IP}} and provides +most of the functionality of DAP at a much lower cost. This use of LDAP makes it easy to access the X.500 directory, but still requires a full X.500 service to make data available to the many LDAP clients being developed. As with full X.500 DAP clients, a full X.500 DAP server is no small piece of software to run. -The stand-alone LDAP daemon, or {{I:slapd}}(8), is meant to remove much +The stand-alone LDAP daemon, or {{slapd}}(8), is meant to remove much of the burden from the server side just as LDAP itself removed much of the burden from clients. If you are already running an X.500 DAP service and you want to continue to do so, you can probably stop reading this -guide, which is all about running LDAP via {{I:slapd}}, without running +guide, which is all about running LDAP via {{slapd}}, without running X.500 DAP. If you are not running X.500 DAP, want to stop running X.500 DAP, or have no immediate plans to run X.500 DAP, read on. -It is possible to replicate data from a {{I:slapd}} directory -server to a X.500 DSA, which allows your organization to make your -data available as part of the global X.500 DAP directory service -on a "read-only" basis. This is discussed in section 11.6. +It is possible to replicate data from a {{slapd}} directory +server to a X.500 {{TERM:DSA}}, which allows your organization to +make your data available as part of the global X.500 DAP directory +service on a "read-only" basis. This is discussed in section 11.6. -Another way to make data in a {{I:slapd}} server available to the +Another way to make data in a {{slapd}} server available to the X.500 community would be by using a X.500 DAP to LDAP gateway. At this time, no such software has been written (to the best of our knowledge), but hopefully some group will see fit to write such a @@ -228,11 +256,11 @@ gateway. H2: What is slurpd and what can it do? -{{I:Slurpd}}(8) is a daemon that helps {{I:slapd}} provide +{{slurpd}}(8) is a daemon that helps {{slapd}} provide replicated service. It is responsible for distributing changes made -to the master {{I:slapd}} database out to the various {{I:slapd}} -replicas. It frees {{I:slapd}} from having to worry that some +to the master {{slapd}} database out to the various {{slapd}} +replicas. It frees {{slapd}} from having to worry that some replicas might be down or unreachable when a change comes through; -{{I:slurpd}} handles retrying failed requests automatically. -{{I:Slapd}} and {{I:slurpd}} communicate through a simple text +{{slurpd}} handles retrying failed requests automatically. +{{slapd}} and {{slurpd}} communicate through a simple text file that is used to log changes. -- 2.39.5