From 01abae4d04868dede60947867699bf096a1831ff Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Thu, 6 Apr 2017 20:42:18 -0400 Subject: [PATCH] Remove various unused interrupt related code With d53ecad92f06 some unused interrupt related code was removed. However all of these options are currently unused. Rather than migrate some of these options to Kconfig we just remove the code in question. The only related code changes here are that in some cases we use CONFIG_STACKSIZE in non-IRQ related context. In these cases we rename and move the value local to the code in question. Fixes: d53ecad92f06 ("Merge branch 'master' of git://git.denx.de/u-boot-sunxi") Signed-off-by: Tom Rini --- arch/arm/cpu/arm720t/interrupts.c | 6 --- arch/arm/cpu/arm920t/Makefile | 1 - arch/arm/cpu/arm920t/s3c24x0/Makefile | 1 - arch/arm/cpu/sa1100/cpu.c | 4 -- arch/arm/lib/interrupts.c | 73 -------------------------- arch/arm/lib/stack.c | 8 --- arch/arm/lib/vectors.S | 33 ------------ arch/arm/mach-davinci/misc.c | 2 - arch/arm/mach-keystone/cmd_ddr3.c | 3 +- arch/avr32/cpu/exception.c | 4 +- arch/nds32/cpu/n1213/start.S | 18 ------- board/Barix/ipam390/ipam390.c | 2 - board/davinci/da8xxevm/da850evm.c | 2 - board/davinci/da8xxevm/omapl138_lcdk.c | 2 - board/davinci/ea20/ea20.c | 2 - board/lego/ev3/legoev3.c | 2 - board/omicron/calimain/calimain.c | 2 - common/board_f.c | 5 -- drivers/net/enc28j60.c | 17 ------ include/configs/advantech_dms-ba16.h | 1 - include/configs/am335x_igep0033.h | 3 -- include/configs/aristainetos-common.h | 2 - include/configs/atngw100.h | 2 - include/configs/atngw100mkii.h | 2 - include/configs/atstk1002.h | 2 - include/configs/bcm23550_w1d.h | 1 - include/configs/bcm28155_ap.h | 1 - include/configs/bcm_ep_board.h | 1 - include/configs/cm_fx6.h | 1 - include/configs/colibri_imx7.h | 2 - include/configs/colibri_vf.h | 6 --- include/configs/edb93xx.h | 7 --- include/configs/el6x_common.h | 2 - include/configs/embestmx6boards.h | 2 - include/configs/ge_bx50v3.h | 1 - include/configs/grasshopper.h | 3 -- include/configs/liteboard.h | 1 - include/configs/ls1021aiot.h | 6 --- include/configs/ls1021aqds.h | 6 --- include/configs/ls1021atwr.h | 6 --- include/configs/ls1043aqds.h | 6 --- include/configs/ls1046aqds.h | 6 --- include/configs/mx6sabre_common.h | 2 - include/configs/mx6slevk.h | 2 - include/configs/mx6sllevk.h | 2 - include/configs/mx6sxsabreauto.h | 2 - include/configs/mx6sxsabresd.h | 2 - include/configs/mx6ul_14x14_evk.h | 1 - include/configs/mx6ullevk.h | 2 - include/configs/mx7dsabresd.h | 2 - include/configs/mx7ulp_evk.h | 1 - include/configs/nokia_rx51.h | 8 --- include/configs/omapl138_lcdk.h | 1 - include/configs/pcm052.h | 6 --- include/configs/pic32mzdask.h | 1 - include/configs/pico-imx6ul.h | 1 - include/configs/s32v234evb.h | 6 --- include/configs/siemens-am33x-common.h | 3 -- include/configs/stm32f429-discovery.h | 2 - include/configs/stm32f746-disco.h | 1 - include/configs/sunxi-common.h | 5 -- include/configs/tao3530.h | 7 --- include/configs/ti814x_evm.h | 3 -- include/configs/ti816x_evm.h | 3 -- include/configs/ti_armv7_keystone2.h | 1 - include/configs/tqma6.h | 2 - include/configs/udoo_neo.h | 1 - include/configs/vf610twr.h | 6 --- include/configs/vining_2000.h | 2 - include/configs/warp.h | 2 - include/configs/warp7.h | 2 - include/configs/woodburn_common.h | 7 --- include/configs/xtfpga.h | 2 - scripts/config_whitelist.txt | 5 -- 74 files changed, 5 insertions(+), 345 deletions(-) diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c index e8ba1ae09e..1edb1a439a 100644 --- a/arch/arm/cpu/arm720t/interrupts.c +++ b/arch/arm/cpu/arm720t/interrupts.c @@ -12,12 +12,6 @@ #include -#ifdef CONFIG_USE_IRQ -void do_irq (struct pt_regs *pt_regs) -{ -} -#endif - #if defined(CONFIG_TEGRA) static ulong timestamp; static ulong lastdec; diff --git a/arch/arm/cpu/arm920t/Makefile b/arch/arm/cpu/arm920t/Makefile index 7aa432a6fc..8faf34b87e 100644 --- a/arch/arm/cpu/arm920t/Makefile +++ b/arch/arm/cpu/arm920t/Makefile @@ -8,7 +8,6 @@ extra-y = start.o obj-y += cpu.o -obj-$(CONFIG_USE_IRQ) += interrupts.o obj-$(CONFIG_EP93XX) += ep93xx/ obj-$(CONFIG_IMX) += imx/ diff --git a/arch/arm/cpu/arm920t/s3c24x0/Makefile b/arch/arm/cpu/arm920t/s3c24x0/Makefile index e44c549ba0..e78f8a017c 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/Makefile +++ b/arch/arm/cpu/arm920t/s3c24x0/Makefile @@ -5,7 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_USE_IRQ) += interrupts.o obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o obj-y += speed.o obj-y += timer.o diff --git a/arch/arm/cpu/sa1100/cpu.c b/arch/arm/cpu/sa1100/cpu.c index 4c9752a1c8..59585af83a 100644 --- a/arch/arm/cpu/sa1100/cpu.c +++ b/arch/arm/cpu/sa1100/cpu.c @@ -19,10 +19,6 @@ #include #include -#ifdef CONFIG_USE_IRQ -DECLARE_GLOBAL_DATA_PTR; -#endif - static void cache_flush(void); int cleanup_before_linux (void) diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c index ed83043abb..066c172bb3 100644 --- a/arch/arm/lib/interrupts.c +++ b/arch/arm/lib/interrupts.c @@ -26,75 +26,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_USE_IRQ -int interrupt_init (void) -{ - unsigned long cpsr; - - /* - * setup up stacks if necessary - */ - IRQ_STACK_START = gd->irq_sp - 4; - IRQ_STACK_START_IN = gd->irq_sp + 8; - FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; - - - __asm__ __volatile__("mrs %0, cpsr\n" - : "=r" (cpsr) - : - : "memory"); - - __asm__ __volatile__("msr cpsr_c, %0\n" - "mov sp, %1\n" - : - : "r" (IRQ_MODE | I_BIT | F_BIT | (cpsr & ~FIQ_MODE)), - "r" (IRQ_STACK_START) - : "memory"); - - __asm__ __volatile__("msr cpsr_c, %0\n" - "mov sp, %1\n" - : - : "r" (FIQ_MODE | I_BIT | F_BIT | (cpsr & ~IRQ_MODE)), - "r" (FIQ_STACK_START) - : "memory"); - - __asm__ __volatile__("msr cpsr_c, %0" - : - : "r" (cpsr) - : "memory"); - - return arch_interrupt_init(); -} - -/* enable IRQ interrupts */ -void enable_interrupts (void) -{ - unsigned long temp; - __asm__ __volatile__("mrs %0, cpsr\n" - "bic %0, %0, #0x80\n" - "msr cpsr_c, %0" - : "=r" (temp) - : - : "memory"); -} - - -/* - * disable IRQ/FIQ interrupts - * returns true if interrupts had been enabled before we disabled them - */ -int disable_interrupts (void) -{ - unsigned long old,temp; - __asm__ __volatile__("mrs %0, cpsr\n" - "orr %1, %0, #0xc0\n" - "msr cpsr_c, %1" - : "=r" (old), "=r" (temp) - : - : "memory"); - return (old & 0x80) == 0; -} -#else int interrupt_init (void) { /* @@ -113,8 +44,6 @@ int disable_interrupts (void) { return 0; } -#endif - void bad_mode (void) { @@ -212,7 +141,6 @@ void do_fiq (struct pt_regs *pt_regs) bad_mode (); } -#ifndef CONFIG_USE_IRQ void do_irq (struct pt_regs *pt_regs) { efi_restore_gd(); @@ -220,4 +148,3 @@ void do_irq (struct pt_regs *pt_regs) show_regs (pt_regs); bad_mode (); } -#endif diff --git a/arch/arm/lib/stack.c b/arch/arm/lib/stack.c index 4614d2657c..737622d26f 100644 --- a/arch/arm/lib/stack.c +++ b/arch/arm/lib/stack.c @@ -25,14 +25,6 @@ int arch_reserve_stacks(void) gd->irq_sp = gd->start_addr_sp; # if !defined(CONFIG_ARM64) -# ifdef CONFIG_USE_IRQ - gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ); - debug("Reserving %zu Bytes for IRQ stack at: %08lx\n", - CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ, gd->start_addr_sp); - - /* 8-byte alignment for ARM ABI compliance */ - gd->start_addr_sp &= ~0x07; -# endif /* leave 3 words for abort-stack, plus 1 for alignment */ gd->start_addr_sp -= 16; # endif diff --git a/arch/arm/lib/vectors.S b/arch/arm/lib/vectors.S index 9fe7415b66..f53b1e9a2b 100644 --- a/arch/arm/lib/vectors.S +++ b/arch/arm/lib/vectors.S @@ -128,19 +128,6 @@ fiq: IRQ_STACK_START_IN: .word 0x0badc0de -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de - -#endif /* CONFIG_USE_IRQ */ - @ @ IRQ stack frame. @ @@ -264,24 +251,6 @@ not_used: bad_save_user_regs bl do_not_used -#ifdef CONFIG_USE_IRQ - - .align 5 -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -fiq: - get_fiq_stack - /* someone ought to write a more effiction fiq_save_user_regs */ - irq_save_user_regs - bl do_fiq - irq_restore_user_regs - -#else .align 5 irq: @@ -295,6 +264,4 @@ fiq: bad_save_user_regs bl do_fiq -#endif /* CONFIG_USE_IRQ */ - #endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/mach-davinci/misc.c b/arch/arm/mach-davinci/misc.c index e1064e0a2f..ec331ba6bb 100644 --- a/arch/arm/mach-davinci/misc.c +++ b/arch/arm/mach-davinci/misc.c @@ -107,7 +107,6 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr) #endif /* CONFIG_DRIVER_TI_EMAC */ #if defined(CONFIG_SOC_DA8XX) -#ifndef CONFIG_USE_IRQ void irq_init(void) { /* @@ -122,7 +121,6 @@ void irq_init(void) writel(0xffffffff, &davinci_aintc_regs->ecr2); writel(0xffffffff, &davinci_aintc_regs->ecr3); } -#endif /* * Enable PSC for various peripherals. diff --git a/arch/arm/mach-keystone/cmd_ddr3.c b/arch/arm/mach-keystone/cmd_ddr3.c index ea78ad8fd5..d3eab0711c 100644 --- a/arch/arm/mach-keystone/cmd_ddr3.c +++ b/arch/arm/mach-keystone/cmd_ddr3.c @@ -15,12 +15,13 @@ DECLARE_GLOBAL_DATA_PTR; #define DDR_MIN_ADDR CONFIG_SYS_SDRAM_BASE +#define STACKSIZE (512 << 10) /* 512 KiB */ #define DDR_REMAP_ADDR 0x80000000 #define ECC_START_ADDR1 ((DDR_MIN_ADDR - DDR_REMAP_ADDR) >> 17) #define ECC_END_ADDR1 (((gd->start_addr_sp - DDR_REMAP_ADDR - \ - CONFIG_STACKSIZE) >> 17) - 2) + STACKSIZE) >> 17) - 2) #define DDR_TEST_BURST_SIZE 1024 diff --git a/arch/avr32/cpu/exception.c b/arch/avr32/cpu/exception.c index d6991f6668..22eab03b12 100644 --- a/arch/avr32/cpu/exception.c +++ b/arch/avr32/cpu/exception.c @@ -10,6 +10,8 @@ DECLARE_GLOBAL_DATA_PTR; +#define STACKSIZE 2048 + static const char * const cpu_modes[8] = { "Application", "Supervisor", "Interrupt level 0", "Interrupt level 1", "Interrupt level 2", "Interrupt level 3", "Exception", "NMI" @@ -96,7 +98,7 @@ void do_unknown_exception(unsigned int ecr, struct pt_regs *regs) printf("CPU Mode: %s\n", cpu_modes[mode]); /* Avoid exception loops */ - if (regs->sp < (gd->start_addr_sp - CONFIG_STACKSIZE) || + if (regs->sp < (gd->start_addr_sp - STACKSIZE) || regs->sp >= gd->start_addr_sp) printf("\nStack pointer seems bogus, won't do stack dump\n"); else diff --git a/arch/nds32/cpu/n1213/start.S b/arch/nds32/cpu/n1213/start.S index 7b2b637af3..99971fdbdb 100644 --- a/arch/nds32/cpu/n1213/start.S +++ b/arch/nds32/cpu/n1213/start.S @@ -90,24 +90,6 @@ _start: j reset _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: diff --git a/board/Barix/ipam390/ipam390.c b/board/Barix/ipam390/ipam390.c index 9747f32904..fd1965d9f5 100644 --- a/board/Barix/ipam390/ipam390.c +++ b/board/Barix/ipam390/ipam390.c @@ -188,9 +188,7 @@ int board_early_init_f(void) int board_init(void) { -#ifndef CONFIG_USE_IRQ irq_init(); -#endif /* arch number of the board */ gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA850_EVM; diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index 37d2f54d3b..9e17eb865d 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -323,9 +323,7 @@ int board_early_init_f(void) int board_init(void) { -#ifndef CONFIG_USE_IRQ irq_init(); -#endif #ifdef CONFIG_NAND_DAVINCI /* diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c index 3ce1992c1d..d941285977 100644 --- a/board/davinci/da8xxevm/omapl138_lcdk.c +++ b/board/davinci/da8xxevm/omapl138_lcdk.c @@ -171,9 +171,7 @@ int board_early_init_f(void) int board_init(void) { -#ifndef CONFIG_USE_IRQ irq_init(); -#endif /* arch number of the board */ gd->bd->bi_arch_number = MACH_TYPE_OMAPL138_LCDK; diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c index 66804d75bd..6edfa17a91 100644 --- a/board/davinci/ea20/ea20.c +++ b/board/davinci/ea20/ea20.c @@ -203,9 +203,7 @@ int board_early_init_f(void) /* Set LCD_B_PWR low to power down LCD Backlight*/ gpio_direction_output(102, 0); -#ifndef CONFIG_USE_IRQ irq_init(); -#endif /* * NAND CS setup - cycle counts based on da850evm NAND timings in the diff --git a/board/lego/ev3/legoev3.c b/board/lego/ev3/legoev3.c index 7e1766c871..0ad33eaeae 100644 --- a/board/lego/ev3/legoev3.c +++ b/board/lego/ev3/legoev3.c @@ -145,9 +145,7 @@ int board_early_init_f(void) int board_init(void) { -#ifndef CONFIG_USE_IRQ irq_init(); -#endif /* arch number of the board */ /* LEGO didn't register for a unique number and uses da850evm */ diff --git a/board/omicron/calimain/calimain.c b/board/omicron/calimain/calimain.c index 32f2b20183..80a142eaf8 100644 --- a/board/omicron/calimain/calimain.c +++ b/board/omicron/calimain/calimain.c @@ -100,9 +100,7 @@ int board_init(void) { int val; -#ifndef CONFIG_USE_IRQ irq_init(); -#endif /* address of boot parameters */ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; diff --git a/common/board_f.c b/common/board_f.c index 224fbed92f..ff07886665 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -137,11 +137,6 @@ static int display_text_info(void) text_base, bss_start, bss_end); #endif -#ifdef CONFIG_USE_IRQ - debug("IRQ Stack: %08lx\n", IRQ_STACK_START); - debug("FIQ Stack: %08lx\n", FIQ_STACK_START); -#endif - return 0; } diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 2fe323a85a..588a84d7a9 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -489,10 +489,6 @@ static void enc_poll(enc_dev_t *enc) u8 eir_reg; u8 pkt_cnt; -#ifdef CONFIG_USE_IRQ - /* clear global interrupt enable bit in enc28j60 */ - enc_bclr(enc, CTL_REG_EIE, ENC_EIE_INTIE); -#endif (void)enc_r8(enc, CTL_REG_ESTAT); eir_reg = enc_r8(enc, CTL_REG_EIR); if (eir_reg & ENC_EIR_TXIF) { @@ -520,10 +516,6 @@ static void enc_poll(enc_dev_t *enc) printf("%s: tx error\n", enc->dev->name); enc_bclr(enc, CTL_REG_EIR, ENC_EIR_TXERIF); } -#ifdef CONFIG_USE_IRQ - /* set global interrupt enable bit in enc28j60 */ - enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE); -#endif } /* @@ -693,15 +685,6 @@ static int enc_setup(enc_dev_t *enc) /* Reset PDPXMD-bit => half duplex */ enc_phy_write(enc, PHY_REG_PHCON1, 0); -#ifdef CONFIG_USE_IRQ - /* enable interrupts */ - enc_bset(enc, CTL_REG_EIE, ENC_EIE_PKTIE); - enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXIE); - enc_bset(enc, CTL_REG_EIE, ENC_EIE_RXERIE); - enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXERIE); - enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE); -#endif - return 0; } diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h index 14e9c06fac..4886500d6a 100644 --- a/include/configs/advantech_dms-ba16.h +++ b/include/configs/advantech_dms-ba16.h @@ -230,7 +230,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE (128 * 1024) /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h index 2b61405345..7ee8ea7975 100644 --- a/include/configs/am335x_igep0033.h +++ b/include/configs/am335x_igep0033.h @@ -117,9 +117,6 @@ "1m(uboot),256k(environment),"\ "-(filesystem)" -/* Unsupported features */ -#undef CONFIG_USE_IRQ - /* SPL */ #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds" diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h index 030f01c36d..5c27055e45 100644 --- a/include/configs/aristainetos-common.h +++ b/include/configs/aristainetos-common.h @@ -148,8 +148,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 -#define CONFIG_STACKSIZE (128 * 1024) - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 708f0320cf..4c27225d84 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -52,8 +52,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_STACKSIZE (2048) - #define CONFIG_BOOTARGS \ "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2" #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index aa308483a2..64d7c45aad 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -71,8 +71,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_STACKSIZE (2048) - #define CONFIG_BOOTARGS \ "root=mtd:main rootfstype=jffs2" #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 771a35ab2b..3c03ed3eb1 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -69,8 +69,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_STACKSIZE (2048) - #define CONFIG_BOOTARGS \ "console=ttyS0 root=/dev/mmcblk0p1 fbmem=600k rootwait=1" diff --git a/include/configs/bcm23550_w1d.h b/include/configs/bcm23550_w1d.h index 65e9e32f3e..77d6e6aa39 100644 --- a/include/configs/bcm23550_w1d.h +++ b/include/configs/bcm23550_w1d.h @@ -25,7 +25,6 @@ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */ -#define CONFIG_STACKSIZE SZ_256K /* GPIO Driver */ #define CONFIG_KONA_GPIO diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h index 2d9b0a878d..03f4ca0338 100644 --- a/include/configs/bcm28155_ap.h +++ b/include/configs/bcm28155_ap.h @@ -24,7 +24,6 @@ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */ -#define CONFIG_STACKSIZE SZ_256K /* GPIO Driver */ #define CONFIG_KONA_GPIO diff --git a/include/configs/bcm_ep_board.h b/include/configs/bcm_ep_board.h index 868b0a85d4..c187df233c 100644 --- a/include/configs/bcm_ep_board.h +++ b/include/configs/bcm_ep_board.h @@ -28,7 +28,6 @@ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) -#define CONFIG_STACKSIZE (256 * 1024) /* Some commands use this as the default load address */ #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 45511be282..14b25d410b 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -237,7 +237,6 @@ #define CONFIG_SERIAL_TAG /* misc */ -#define CONFIG_STACKSIZE (128 * 1024) #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) #define CONFIG_MISC_INIT_R diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 2c9c0142bb..87d2012984 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -136,8 +136,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 888899eacb..73b43bd7ad 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -150,12 +150,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical memory map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM (0x80000000) diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 99f0daece3..f012af547f 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -74,7 +74,6 @@ #define CONFIG_EP93XX 1 /* This is a Cirrus Logic 93xx SoC */ #define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */ -#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */ /* Monitor configuration */ #undef CONFIG_CMD_DATE @@ -161,12 +160,6 @@ /* Run-time memory allocatons */ #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_STACKSIZE (128 * 1024) - -#if defined(CONFIG_USE_IRQ) -#define CONFIG_STACKSIZE_IRQ (4 * 1024) -#define CONFIG_STACKSIZE_FIQ (4 * 1024) -#endif #define CONFIG_SYS_MALLOC_LEN (512 * 1024) diff --git a/include/configs/el6x_common.h b/include/configs/el6x_common.h index afb5b73899..084839702b 100644 --- a/include/configs/el6x_common.h +++ b/include/configs/el6x_common.h @@ -99,8 +99,6 @@ #define CONFIG_SYS_MEMTEST_END 0x10800000 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 -#define CONFIG_STACKSIZE (128 * 1024) - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 48c9e0b3e9..658f4d932d 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -76,8 +76,6 @@ #define CONFIG_SYS_MEMTEST_END 0x10010000 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 -#define CONFIG_STACKSIZE (128 * 1024) - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index f86e20caa2..43b1fb030c 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -260,7 +260,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE (128 * 1024) /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h index d7b9c18c89..abc4214bc0 100644 --- a/include/configs/grasshopper.h +++ b/include/configs/grasshopper.h @@ -69,9 +69,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_STACKSIZE (2048) - - /* * After booting the board for the first time, new ethernet addresses * should be generated and assigned to the environment variables diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h index 2ce39ffecf..258fd3ac62 100644 --- a/include/configs/liteboard.h +++ b/include/configs/liteboard.h @@ -113,7 +113,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE SZ_128K /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index dfb72384d3..d8bbc802d2 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -269,12 +269,6 @@ #define CONFIG_LS102XA_STREAM_ID -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (30 * 1024) - #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 15850f2b52..b349b367eb 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -537,12 +537,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_LS102XA_STREAM_ID -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (30 * 1024) - #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 5d6a64acbd..fcf035b86a 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -403,12 +403,6 @@ #define CONFIG_LS102XA_STREAM_ID -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (30 * 1024) - #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index 6a345c0400..b14e944897 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -396,12 +396,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_HZ 1000 -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (30 * 1024) - #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 476387d5ad..0cf6010a6c 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -434,12 +434,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_HZ 1000 -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (30 * 1024) - #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index a2ab77a727..c04ae96f9d 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -180,8 +180,6 @@ #define CONFIG_SYS_MEMTEST_END 0x10010000 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 -#define CONFIG_STACKSIZE (128 * 1024) - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 3e7e5a3997..f35d1265b0 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -127,8 +127,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M) -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx6sllevk.h b/include/configs/mx6sllevk.h index 8215e63baa..62159a16b7 100644 --- a/include/configs/mx6sllevk.h +++ b/include/configs/mx6sllevk.h @@ -113,8 +113,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_128M) -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index 448b575c28..971f6c2f31 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -95,8 +95,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index aff7a24587..e63da43692 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -123,8 +123,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index 71c22fffa8..f466c626a2 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -150,7 +150,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE SZ_128K /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index c65a9e5474..5bc26aac7e 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -137,8 +137,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index 81d769f21f..9807ace1d9 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -178,8 +178,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index f6e4b3bc78..37f365dc55 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -88,7 +88,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE SZ_8K /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 6b128df464..e99968c805 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -48,7 +48,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */ @@ -380,13 +379,6 @@ int rx51_kp_getc(struct stdio_dev *sdev); #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /* * Physical Memory Map */ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 6700073aa2..85e95b3177 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -48,7 +48,6 @@ #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 286598d2de..f506c9c8df 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -226,12 +226,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical memory map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM (0x80000000) diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index dacb78ab69..9042dc269e 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -37,7 +37,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x88000000 #define CONFIG_SYS_MALLOC_LEN (256 << 10) #define CONFIG_SYS_BOOTPARAMS_LEN (4 << 10) -#define CONFIG_STACKSIZE (4 << 10) /* regular stack */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (192 << 10) diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 8ad7fa620d..26b1b1147c 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -117,7 +117,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE SZ_128K /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h index 0b12bf3d55..398b3aa343 100644 --- a/include/configs/s32v234evb.h +++ b/include/configs/s32v234evb.h @@ -199,12 +199,6 @@ #define CONFIG_SYS_MALLOC_BASE (DDR_BASE_ADDR) #endif -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - #if 0 /* Configure PXE */ #define CONFIG_BOOTP_PXE diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 5a9ec02368..d69f513c65 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -228,9 +228,6 @@ # define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ #endif /* SPI support */ -/* Unsupported features */ -#undef CONFIG_USE_IRQ - #define CONFIG_DRIVER_TI_CPSW #define CONFIG_MII #define CONFIG_PHY_GIGE diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index a456e458aa..8609f2a0a9 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -66,8 +66,6 @@ #define CONFIG_SYS_MALLOC_LEN (2 << 20) -#define CONFIG_STACKSIZE (64 << 10) - #define CONFIG_BOOTARGS \ "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h index 55280f203f..5776d89c97 100644 --- a/include/configs/stm32f746-disco.h +++ b/include/configs/stm32f746-disco.h @@ -58,7 +58,6 @@ #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024) -#define CONFIG_STACKSIZE (256 * 1024) #define CONFIG_BOOTARGS \ "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 377ae00a7b..cda2fec519 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -155,11 +155,6 @@ /* standalone support */ #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR -/* baudrate */ - -/* The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ - /* FLASH and environment organization */ #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 035a9325b3..3f2da5795d 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -195,13 +195,6 @@ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /* * Physical Memory Map */ diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 319279e4fa..baf818ba1a 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -179,9 +179,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #endif -/* Unsupported features */ -#undef CONFIG_USE_IRQ - /* Ethernet */ #define CONFIG_DRIVER_TI_CPSW #define CONFIG_MII diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 284046740c..b5af700e38 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -137,7 +137,4 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #endif -/* Unsupported features */ -#undef CONFIG_USE_IRQ - #endif diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index f76e0a5c1f..c83cd76b86 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -28,7 +28,6 @@ #define CONFIG_NR_DRAM_BANKS 2 #define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000 #define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ -#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE - \ GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index e72332cd1b..1bfc438b81 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -349,8 +349,6 @@ "panicboot=echo No boot device !!! reset\0" \ TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \ -#define CONFIG_STACKSIZE (128u * SZ_1K) - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h index 1d737ccd3e..c6f39c38b3 100644 --- a/include/configs/udoo_neo.h +++ b/include/configs/udoo_neo.h @@ -69,7 +69,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) -#define CONFIG_STACKSIZE SZ_128K /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index ee90045cad..3e7dc9b685 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -209,12 +209,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80010000 #define CONFIG_SYS_MEMTEST_END 0x87C00000 -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical memory map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM (0x80000000) diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h index ade5c2736f..9a517a9738 100644 --- a/include/configs/vining_2000.h +++ b/include/configs/vining_2000.h @@ -33,8 +33,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/warp.h b/include/configs/warp.h index 865f2ac81c..5274b274a4 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -35,8 +35,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_256M) -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/warp7.h b/include/configs/warp7.h index b3e1f2e597..23b6eae533 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -85,8 +85,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index 3f837e86fb..f546c385e9 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -118,13 +118,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* * Physical Memory Map */ diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index 5169504dc7..b1aa57935d 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -66,7 +66,6 @@ # define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256KB */ #endif -#define CONFIG_SYS_STACKSIZE (512 << 10) /* stack 512KB */ #define CONFIG_SYS_MALLOC_LEN (256 << 10) /* heap 256KB */ /* Linux boot param area in RAM (used only when booting linux) */ @@ -110,7 +109,6 @@ /* U-Boot general configuration */ /*==============================*/ -#undef CONFIG_USE_IRQ /* Keep it simple, poll only */ #define CONFIG_BOARD_POSTCLK_INIT #define CONFIG_MISC_INIT_R diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 811ba91d95..04b6a95052 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2859,9 +2859,6 @@ CONFIG_SSP1_BASE CONFIG_SSP2_BASE CONFIG_SSP3_BASE CONFIG_STACKBASE -CONFIG_STACKSIZE -CONFIG_STACKSIZE_FIQ -CONFIG_STACKSIZE_IRQ CONFIG_STANDALONE_LOAD_ADDR CONFIG_STATIC_BOARD_REV CONFIG_STATIC_RELA @@ -6052,7 +6049,6 @@ CONFIG_SYS_SSD_BASE CONFIG_SYS_SSD_BASE_PHYS CONFIG_SYS_SST_SECT CONFIG_SYS_SST_SECTSZ -CONFIG_SYS_STACKSIZE CONFIG_SYS_STACK_LENGTH CONFIG_SYS_STACK_SIZE CONFIG_SYS_STATUS_C @@ -6562,7 +6558,6 @@ CONFIG_USB_XHCI_PCI CONFIG_USER_LOWLEVEL_INIT CONFIG_USE_FDT CONFIG_USE_INTERRUPT -CONFIG_USE_IRQ CONFIG_USE_NAND CONFIG_USE_NETDEV CONFIG_USE_NOR -- 2.39.5