From 0299c90f396c5b2971a4bac596339f4b03661c27 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 20 Oct 2015 15:14:47 +0200 Subject: [PATCH] arm: mvebu: Add SolidRun ClearFog Armada 38x initial support This patch adds basic support for the SolidRun ClearFog Armada 38x based board to mainline U-Boot. Supported interfaces / devices are: - DDR3 - UART - MMC - Ethernet port 0 (connected to dedicated PHY) - I2C The included DT source was taken from Russell King's ftp server: http://www.home.arm.linux.org.uk/~rmk/clearfog/ With only minor modifications, like the addition of some aliases and the "u-boot,dm-pre-reloc" property. Signed-off-by: Stefan Roese Cc: Rabeeh Khoury Cc: Luka Perkov --- arch/arm/Kconfig | 1 + arch/arm/dts/Makefile | 1 + arch/arm/dts/armada-388-clearfog.dts | 509 +++++++++++++++++++++++++++ arch/arm/mach-mvebu/Kconfig | 3 + board/solidrun/clearfog/Kconfig | 12 + board/solidrun/clearfog/MAINTAINERS | 6 + board/solidrun/clearfog/Makefile | 7 + board/solidrun/clearfog/README | 18 + board/solidrun/clearfog/clearfog.c | 156 ++++++++ board/solidrun/clearfog/kwbimage.cfg | 12 + configs/clearfog_defconfig | 21 ++ include/configs/clearfog.h | 183 ++++++++++ 12 files changed, 929 insertions(+) create mode 100644 arch/arm/dts/armada-388-clearfog.dts create mode 100644 board/solidrun/clearfog/Kconfig create mode 100644 board/solidrun/clearfog/MAINTAINERS create mode 100644 board/solidrun/clearfog/Makefile create mode 100644 board/solidrun/clearfog/README create mode 100644 board/solidrun/clearfog/clearfog.c create mode 100644 board/solidrun/clearfog/kwbimage.cfg create mode 100644 configs/clearfog_defconfig create mode 100644 include/configs/clearfog.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ab621cca7d..4b5cd57f71 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -828,6 +828,7 @@ source "board/siemens/draco/Kconfig" source "board/siemens/pxm2/Kconfig" source "board/siemens/rut/Kconfig" source "board/silica/pengwyn/Kconfig" +source "board/solidrun/clearfog/Kconfig" source "board/spear/spear300/Kconfig" source "board/spear/spear310/Kconfig" source "board/spear/spear320/Kconfig" diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a2964953db..084f11327d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -48,6 +48,7 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra210-p2571.dtb dtb-$(CONFIG_ARCH_MVEBU) += \ + armada-388-clearfog.dtb \ armada-388-gp.dtb \ armada-xp-gp.dtb \ armada-xp-maxbcm.dtb diff --git a/arch/arm/dts/armada-388-clearfog.dts b/arch/arm/dts/armada-388-clearfog.dts new file mode 100644 index 0000000000..b2dfd56435 --- /dev/null +++ b/arch/arm/dts/armada-388-clearfog.dts @@ -0,0 +1,509 @@ +/* + * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828) + * + * Copyright (C) 2015 Russell King + * + * This board is in development; the contents of this file work with + * the A1 rev 2.0 of the board, which does not represent final + * production board. Things will change, don't expect this file to + * remain compatible info the future. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include +#include +#include "armada-388.dtsi" + +/ { + model = "SolidRun Clearfog A1"; + compatible = "solidrun,clearfog-a1", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; + + aliases { + /* So that mvebu u-boot can update the MAC addresses */ + ethernet1 = ð0; + ethernet2 = ð1; + ethernet3 = ð2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* 256 MB */ + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + soc { + ranges = ; + + internal-regs { + ethernet@30000 { + mac-address = [00 50 43 02 02 02]; + phy-mode = "sgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + ethernet@34000 { + mac-address = [00 50 43 02 02 03]; + managed = "in-band-status"; + phy-mode = "sgmii"; + status = "okay"; + }; + + ethernet@70000 { + mac-address = [00 50 43 02 02 01]; + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy_dedicated>; + phy-mode = "rgmii-id"; + status = "okay"; + }; + + i2c@11000 { + /* Is there anything on this? */ + clock-frequency = <100000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* + * PCA9655 GPIO expander, up to 1MHz clock. + * 0-CON3 CLKREQ# + * 1-CON3 PERST# + * 2-CON2 PERST# + * 3-CON3 W_DISABLE + * 4-CON2 CLKREQ# + * 5-USB3 overcurrent + * 6-USB3 power + * 7-CON2 W_DISABLE + * 8-JP4 P1 + * 9-JP4 P4 + * 10-JP4 P5 + * 11-m.2 DEVSLP + * 12-SFP_LOS + * 13-SFP_TX_FAULT + * 14-SFP_TX_DISABLE + * 15-SFP_MOD_DEF0 + */ + expander0: gpio-expander@20 { + /* + * This is how it should be: + * compatible = "onnn,pca9655", + * "nxp,pca9555"; + * but you can't do this because of + * the way I2C works. + */ + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + + pcie1_0_clkreq { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie1.0-clkreq"; + }; + pcie1_0_w_disable { + gpio-hog; + gpios = <3 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie1.0-w-disable"; + }; + pcie2_0_clkreq { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie2.0-clkreq"; + }; + pcie2_0_w_disable { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie2.0-w-disable"; + }; + usb3_ilimit { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + input; + line-name = "usb3-current-limit"; + }; + usb3_power { + gpio-hog; + gpios = <6 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb3-power"; + }; + m2_devslp { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "m.2 devslp"; + }; + }; + + /* The MCP3021 is 100kHz clock only */ + mikrobus_adc: mcp3021@4c { + compatible = "microchip,mcp3021"; + reg = <0x4c>; + }; + + /* Also something at 0x64 */ + }; + + i2c@11100 { + /* + * Routed to SFP, mikrobus, and PCIe. + * SFP limits this to 100kHz, and requires + * an AT24C01A/02/04 with address pins tied + * low, which takes addresses 0x50 and 0x51. + * Mikrobus doesn't specify beyond an I2C + * bus being present. + * PCIe uses ARP to assign addresses, or + * 0x63-0x64. + */ + clock-frequency = <100000>; + pinctrl-0 = <&clearfog_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + mdio@72004 { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy_dedicated: ethernet-phy@0 { + /* + * Annoyingly, the marvell phy driver + * configures the LED register, rather + * than preserving reset-loaded setting. + * We undo that rubbish here. + */ + marvell,reg-init = <3 16 0 0x101e>; + reg = <0>; + }; + }; + + pinctrl@18000 { + clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { + marvell,pins = "mpp46"; + marvell,function = "ref"; + }; + clearfog_dsa0_pins: clearfog-dsa0-pins { + marvell,pins = "mpp23", "mpp41"; + marvell,function = "gpio"; + }; + clearfog_i2c1_pins: i2c1-pins { + /* SFP, PCIe, mSATA, mikrobus */ + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c1"; + }; + clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + clearfog_sdhci_pins: clearfog-sdhci-pins { + marvell,pins = "mpp21", "mpp28", + "mpp37", "mpp38", + "mpp39", "mpp40"; + marvell,function = "sd0"; + }; + clearfog_spi1_cs_pins: spi1-cs-pins { + marvell,pins = "mpp55"; + marvell,function = "spi1"; + }; + mikro_pins: mikro-pins { + /* int: mpp22 rst: mpp29 */ + marvell,pins = "mpp22", "mpp29"; + marvell,function = "gpio"; + }; + mikro_spi_pins: mikro-spi-pins { + marvell,pins = "mpp43"; + marvell,function = "spi1"; + }; + mikro_uart_pins: mikro-uart-pins { + marvell,pins = "mpp24", "mpp25"; + marvell,function = "ua1"; + }; + rear_button_pins: rear-button-pins { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + }; + + rtc@a3800 { + /* + * If the rtc doesn't work, run "date reset" + * twice in u-boot. + */ + status = "okay"; + }; + + sata@a8000 { + /* pinctrl? */ + status = "okay"; + }; + + sata@e0000 { + /* pinctrl? */ + status = "okay"; + }; + + sdhci@d8000 { + bus-width = <4>; + cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + no-1-8-v; + pinctrl-0 = <&clearfog_sdhci_pins + &clearfog_sdhci_cd_pins>; + pinctrl-names = "default"; + status = "okay"; + vmmc = <®_3p3v>; + wp-inverted; + }; + + serial@12000 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; + u-boot,dm-pre-reloc; + }; + + serial@12100 { + /* mikrobus uart */ + pinctrl-0 = <&mikro_uart_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + spi@10680 { + /* + * We don't seem to have the W25Q32 on the + * A1 Rev 2.0 boards, so disable SPI. + * CS0: W25Q32 (doesn't appear to be present) + * CS1: + * CS2: mikrobus + */ + pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>; + pinctrl-names = "default"; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "w25q32", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <3000000>; + status = "disabled"; + }; + }; + + usb3@f8000 { + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * the mini-PCIe connectors on the board. + */ + pcie@2,0 { + /* Port 1, Lane 0. CONN3, nearest power. */ + reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + pcie@3,0 { + /* Port 2, Lane 0. CONN2, nearest CPU. */ + reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + }; + }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; + moddef0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>; + sfp,ethernet = <ð2>; + tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>; + }; + + dsa@0 { + compatible = "marvell,dsa"; + dsa,ethernet = <ð1>; + dsa,mii-bus = <&mdio>; + pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; + pinctrl-names = "default"; + #address-cells = <2>; + #size-cells = <0>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4 0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "lan5"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + }; + + port@6 { + /* 88E1512 external phy */ + reg = <6>; + label = "lan6"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&rear_button_pins>; + pinctrl-names = "default"; + + button_0 { + /* The rear SW3 button */ + label = "Rear Button"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = ; + }; + }; +}; + +/* ++#define A38x_CUSTOMER_BOARD_1_MPP16_23 0x00400011 +MPP18: gpio ? (pca9655 int?) +MPP19: gpio ? (clkreq?) +MPP20: gpio ? (sd0 detect) +MPP21: sd0:cmd x sd0 +MPP22: gpio x mikro int +MPP23: gpio x switch irq ++#define A38x_CUSTOMER_BOARD_1_MPP24_31 0x22043333 +MPP24: ua1:rxd x mikro rx +MPP25: ua1:txd x mikro tx +MPP26: i2c1:sck x mikro sck +MPP27: i2c1:sda x mikro sda +MPP28: sd0:clk x sd0 +MPP29: gpio x mikro rst +MPP30: ge1:txd2 ? (config) +MPP31: ge1:txd3 ? (config) ++#define A38x_CUSTOMER_BOARD_1_MPP32_39 0x44400002 +MPP32: ge1:txctl ? (unused) +MPP33: gpio ? (pic_com0) +MPP34: gpio x rear button (pic_com1) +MPP35: gpio ? (pic_com2) +MPP36: gpio ? (unused) +MPP37: sd0:d3 x sd0 +MPP38: sd0:d0 x sd0 +MPP39: sd0:d1 x sd0 ++#define A38x_CUSTOMER_BOARD_1_MPP40_47 0x41144004 +MPP40: sd0:d2 x sd0 +MPP41: gpio x switch reset +MPP42: gpio ? sw1-1 +MPP43: spi1:cs2 x mikro cs +MPP44: sata3:prsnt ? (unused) +MPP45: ref:clk_out0 ? +MPP46: ref:clk_out1 x switch clk +MPP47: 4 ? (unused) ++#define A38x_CUSTOMER_BOARD_1_MPP48_55 0x40333333 +MPP48: tdm:pclk +MPP49: tdm:fsync +MPP50: tdm:drx +MPP51: tdm:dtx +MPP52: tdm:int +MPP53: tdm:rst +MPP54: gpio ? (pwm) +MPP55: spi1:cs1 x slic ++#define A38x_CUSTOMER_BOARD_1_MPP56_63 0x00004444 +MPP56: spi1:mosi x mikro mosi +MPP57: spi1:sck x mikro sck +MPP58: spi1:miso x mikro miso +MPP59: spi1:cs0 x w25q32 +*/ diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 79ff0e8278..82a439e6af 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -4,6 +4,9 @@ choice prompt "Marvell MVEBU (Armada XP/38x) board select" optional +config TARGET_CLEARFOG + bool "Support ClearFog" + config TARGET_DB_88F6820_GP bool "Support DB-88F6820-GP" diff --git a/board/solidrun/clearfog/Kconfig b/board/solidrun/clearfog/Kconfig new file mode 100644 index 0000000000..cdf8938bd1 --- /dev/null +++ b/board/solidrun/clearfog/Kconfig @@ -0,0 +1,12 @@ +if TARGET_CLEARFOG + +config SYS_BOARD + default "clearfog" + +config SYS_VENDOR + default "solidrun" + +config SYS_CONFIG_NAME + default "clearfog" + +endif diff --git a/board/solidrun/clearfog/MAINTAINERS b/board/solidrun/clearfog/MAINTAINERS new file mode 100644 index 0000000000..298e5011c7 --- /dev/null +++ b/board/solidrun/clearfog/MAINTAINERS @@ -0,0 +1,6 @@ +CLEARFOG BOARD +M: Stefan Roese +S: Maintained +F: board/soldrun/clearfog/ +F: include/configs/clearfog.h +F: configs/clearfog_defconfig diff --git a/board/solidrun/clearfog/Makefile b/board/solidrun/clearfog/Makefile new file mode 100644 index 0000000000..1920d6bf6d --- /dev/null +++ b/board/solidrun/clearfog/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2015 Stefan Roese +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := clearfog.o diff --git a/board/solidrun/clearfog/README b/board/solidrun/clearfog/README new file mode 100644 index 0000000000..2cfa5bfc86 --- /dev/null +++ b/board/solidrun/clearfog/README @@ -0,0 +1,18 @@ +Update from original Marvell U-Boot to mainline U-Boot: +------------------------------------------------------- + +Generate the U-Boot image with these commands: + +$ make clearfog_defconfig +$ make + +The resulting image including the SPL binary with the +full DDR setup is "u-boot-spl.kwb". + +Now all you need to do is copy this image on a SD card. +For example with this command: + +$ sudo dd if=u-boot-spl.kwb of=/dev/sdX bs=512 seek=1 + +Please use the correct device node for your setup instead +of "/dev/sdX" here! diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c new file mode 100644 index 0000000000..2773f5957e --- /dev/null +++ b/board/solidrun/clearfog/clearfog.c @@ -0,0 +1,156 @@ +/* + * Copyright (C) 2015 Stefan Roese + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "../drivers/ddr/marvell/a38x/ddr3_a38x_topology.h" +#include <../serdes/a38x/high_speed_env_spec.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define ETH_PHY_CTRL_REG 0 +#define ETH_PHY_CTRL_POWER_DOWN_BIT 11 +#define ETH_PHY_CTRL_POWER_DOWN_MASK (1 << ETH_PHY_CTRL_POWER_DOWN_BIT) + +/* + * Those values and defines are taken from the Marvell U-Boot version + * "u-boot-2013.01-15t1-clearfog" + */ +#define BOARD_GPP_OUT_ENA_LOW 0xffffffff +#define BOARD_GPP_OUT_ENA_MID 0xffffffff + +#define BOARD_GPP_OUT_VAL_LOW 0x0 +#define BOARD_GPP_OUT_VAL_MID 0x0 +#define BOARD_GPP_POL_LOW 0x0 +#define BOARD_GPP_POL_MID 0x0 + +/* IO expander on Marvell GP board includes e.g. fan enabling */ +struct marvell_io_exp { + u8 chip; + u8 addr; + u8 val; +}; + +static struct marvell_io_exp io_exp[] = { + { 0x20, 2, 0x40 }, /* Deassert both mini pcie reset signals */ + { 0x20, 6, 0xf9 }, + { 0x20, 2, 0x46 }, /* rst signals and ena USB3 current limiter */ + { 0x20, 6, 0xb9 }, + { 0x20, 3, 0x00 }, /* Set SFP_TX_DIS to zero */ + { 0x20, 7, 0xbf }, /* Drive SFP_TX_DIS to zero */ +}; + +static struct serdes_map board_serdes_map[] = { + {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII1, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}, +}; + +int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count) +{ + *serdes_map_array = board_serdes_map; + *count = ARRAY_SIZE(board_serdes_map); + return 0; +} + +/* + * Define the DDR layout / topology here in the board file. This will + * be used by the DDR3 init code in the SPL U-Boot version to configure + * the DDR3 controller. + */ +static struct hws_topology_map board_topology_map = { + 0x1, /* active interfaces */ + /* cs_mask, mirror, dqs_swap, ck_swap X PUPs */ + { { { {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0} }, + SPEED_BIN_DDR_1600K, /* speed_bin */ + BUS_WIDTH_16, /* memory_width */ + MEM_4G, /* mem_size */ + DDR_FREQ_800, /* frequency */ + 0, 0, /* cas_l cas_wl */ + HWS_TEMP_LOW} }, /* temperature */ + 5, /* Num Of Bus Per Interface*/ + BUS_MASK_32BIT /* Busses mask */ +}; + +struct hws_topology_map *ddr3_get_topology_map(void) +{ + /* Return the board topology as defined in the board code */ + return &board_topology_map; +} + +int board_early_init_f(void) +{ + /* Configure MPP */ + writel(0x11111111, MVEBU_MPP_BASE + 0x00); + writel(0x11111111, MVEBU_MPP_BASE + 0x04); + writel(0x10400011, MVEBU_MPP_BASE + 0x08); + writel(0x22043333, MVEBU_MPP_BASE + 0x0c); + writel(0x44400002, MVEBU_MPP_BASE + 0x10); + writel(0x41144004, MVEBU_MPP_BASE + 0x14); + writel(0x40333333, MVEBU_MPP_BASE + 0x18); + writel(0x00004444, MVEBU_MPP_BASE + 0x1c); + + /* Set GPP Out value */ + writel(BOARD_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00); + writel(BOARD_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00); + + /* Set GPP Polarity */ + writel(BOARD_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c); + writel(BOARD_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c); + + /* Set GPP Out Enable */ + writel(BOARD_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04); + writel(BOARD_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04); + + return 0; +} + +int board_init(void) +{ + int i; + + /* Address of boot parameters */ + gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; + + /* Toggle GPIO41 to reset onboard switch and phy */ + clrbits_le32(MVEBU_GPIO1_BASE + 0x0, BIT(9)); + clrbits_le32(MVEBU_GPIO1_BASE + 0x4, BIT(9)); + mdelay(1); + setbits_le32(MVEBU_GPIO1_BASE + 0x0, BIT(9)); + mdelay(10); + + /* Init I2C IO expanders */ + for (i = 0; i < ARRAY_SIZE(io_exp); i++) + i2c_write(io_exp[i].chip, io_exp[i].addr, 1, &io_exp[i].val, 1); + + return 0; +} + +int checkboard(void) +{ + puts("Board: SolidRun ClearFog\n"); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + cpu_eth_init(bis); /* Built in controller(s) come first */ + return pci_eth_init(bis); +} diff --git a/board/solidrun/clearfog/kwbimage.cfg b/board/solidrun/clearfog/kwbimage.cfg new file mode 100644 index 0000000000..c650c2c65e --- /dev/null +++ b/board/solidrun/clearfog/kwbimage.cfg @@ -0,0 +1,12 @@ +# +# Copyright (C) 2015 Stefan Roese +# + +# Armada XP uses version 1 image format +VERSION 1 + +# Boot Media configurations +BOOT_FROM sdio + +# Binary Header (bin_hdr) with DDR3 training code +BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig new file mode 100644 index 0000000000..57d6a64b43 --- /dev/null +++ b/configs/clearfog_defconfig @@ -0,0 +1,21 @@ +CONFIG_ARM=y +CONFIG_ARCH_MVEBU=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_TARGET_CLEARFOG=y +CONFIG_DEFAULT_DEVICE_TREE="armada-388-clearfog" +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_SPL_OF_TRANSLATE=y +CONFIG_SPI_FLASH=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_BASE=0xd0012000 +CONFIG_DEBUG_UART_CLOCK=250000000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h new file mode 100644 index 0000000000..c74415d82b --- /dev/null +++ b/include/configs/clearfog.h @@ -0,0 +1,183 @@ +/* + * Copyright (C) 2015 Stefan Roese + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_CLEARFOG_H +#define _CONFIG_CLEARFOG_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_ARMADA_XP /* SOC Family Name */ +#define CONFIG_ARMADA_38X +#define CONFIG_DB_88F6820_GP /* Board target name for DDR training */ + +#define CONFIG_DISPLAY_BOARDINFO_LATE + +/* + * TEXT_BASE needs to be below 16MiB, since this area is scrubbed + * for DDR ECC byte filling in the SPL before loading the main + * U-Boot into it. + */ +#define CONFIG_SYS_TEXT_BASE 0x00800000 +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_CMD_TFTPPUT +#define CONFIG_CMD_TIME + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MVTWSI +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_SPEED 1000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 +#define CONFIG_SPI_FLASH_STMICRO + +/* + * SDIO/MMC Card Configuration + */ +#define CONFIG_MMC +#define CONFIG_MMC_SDMA +#define CONFIG_GENERIC_MMC +#define CONFIG_SDHCI +#define CONFIG_MV_SDHCI +#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE + +/* Partition support */ +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION + +/* Additional FS support/configuration */ +#define CONFIG_SUPPORT_VFAT + +/* USB/EHCI configuration */ +#define CONFIG_EHCI_IS_TDI + +#define CONFIG_ENV_MIN_ENTRIES 128 + +/* Environment in MMC */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SECT_SIZE 0x200 +#define CONFIG_ENV_SIZE 0x10000 +/* + * For SD - reserve 1 LBA for MBR + 1M for u-boot image. The MMC/eMMC + * boot image starts @ LBA-0. + * As result in MMC/eMMC case it will be a 1 sector gap between u-boot + * image and environment + */ +#define CONFIG_ENV_OFFSET 0xf0000 +#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET + +#define CONFIG_PHY_MARVELL /* there is a marvell phy */ +#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ + +/* PCIe support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PCI +#define CONFIG_PCI_MVEBU +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#endif + +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_ALT_MEMTEST + +/* Keep device tree and initrd in lower memory so the kernel can access them */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" + +/* SPL */ +/* + * Select the boot device here + * + * Currently supported are: + * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash + * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1) + */ +#define SPL_BOOT_SPI_NOR_FLASH 1 +#define SPL_BOOT_SDIO_MMC_CARD 2 +#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SDIO_MMC_CARD + +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_SIZE (140 << 10) +#define CONFIG_SPL_TEXT_BASE 0x40000030 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MALLOC_SIMPLE +#endif + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT + +#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS +#endif + +#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD +/* SPL related MMC defines */ +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR ((CONFIG_SYS_U_BOOT_OFFS / 512)\ + + 1) +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS ((512 << 10) / 512) /* 512KiB */ +#ifdef CONFIG_SPL_BUILD +#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ +#endif +#endif + +/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ +#define CONFIG_SYS_MVEBU_DDR_A38X +#define CONFIG_DDR3 + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +#endif /* _CONFIG_CLEARFOG_H */ -- 2.39.5