From 05f474c4d0469bebc0bb05df60a39dc7fdf28e62 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 28 Apr 2009 00:29:34 +0200 Subject: [PATCH] Update CHANGELOG Signed-off-by: Wolfgang Denk --- CHANGELOG | 559 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 559 insertions(+) diff --git a/CHANGELOG b/CHANGELOG index a38a450bb1..af42085111 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,562 @@ +commit ad74cae9ff8790727bc81ee91c6bca7d50dca446 +Author: David Brownell +Date: Thu Apr 16 23:15:15 2009 -0700 + + dm9000 EEPROM reading bugfix + + Make the U-Boot dm9000 driver read addresses from EEPROM just + like Linux does ... read six bytes, instead of reading twelve + bytes and then discarding every other one. + + Using the right Ethernet address is a big win. + + Signed-off-by: David Brownell + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Ben Warren + +commit d4c02e6f5d49880123e7f584b88f857ffd874381 +Author: Yoshihiro Shimoda +Date: Wed Feb 25 14:27:24 2009 +0900 + + rtl8169: fix cache coherency problem + + Fix the problem that cannot access actual data when CPU data cache enabled. + + Signed-off-by: Yoshihiro Shimoda + Tested-by: Nobuhiro Iwamatsu + Acked-by: Ben Warren + +commit 34b76a14f676bc6501c27a96564e4dfb4793f033 +Author: Wolfgang Denk +Date: Sun Apr 26 20:39:26 2009 +0200 + + lib_arm/board.c: remove misleading "test-only" comment. + + For a long time, the print_cpuinfo() declaration in lib_arm/board.c + had been marked as "test-only", which is plain wrong considering + current usage. Delete this misleading comment. + + Signed-off-by: Wolfgang Denk + +commit 14b9308d511b53042ef478936e367a67282df66a +Author: Heiko Schocher +Date: Fri Apr 24 06:50:45 2009 +0200 + + 83xx: searching "muram-data" by compatible property + + if using CONFIG_BOOTCOUNT_LIMIT feature on a MPC8360 CPU + in the muram-data node, the reg entry needs to be updated. + This is done in fdt_fixup_muram(), but we should use + the compatible "fsl,qe-muram-data" for searching the + node instead of searching the muram-data node with + an absolute path. + + Signed-off-by: Heiko Schocher + Signed-off-by: Kim Phillips + +commit 8e15088794807944b221c11609d36789efc7f767 +Author: Anatolij Gustschin +Date: Thu Apr 23 21:29:34 2009 +0200 + + mpc83xx: MPC8360ERDK: fix environment offset configuration bug + + The size of U-Boot binary for MPC8360ERDK increased + (> 2 flash sectors now), so 'saveenv' will partially + overwrite U-Boot in flash and will brick the board. + This patch moves environment offset to fourth flash + sector and also fixes CONFIG_SYS_MONITOR_LEN. + + Signed-off-by: Anatolij Gustschin + Signed-off-by: Kim Phillips + +commit 3c172c4fdbbb5858fae38478d6399be4a16be3fc +Author: Michael Zaidman +Date: Sat Apr 4 01:43:00 2009 +0300 + + NetLoop initialization bug + + The patch fixes the bug of partial initialization of global network + parameters. + + Upon u-boot's start up the first ping command causes a failure of the + consequent TFTP command. It happens in the recently added mechanism of + the NetLoop initialization where initialization of global network + parameters is separated in the NetInitLoop routine which is called per + env_id change. Thus, ping request will initialize the network parameters + necessary for ping operation only, afterwards the env_changed_id will be + set to the env_id that will prevent all following initialization requests + from other protocols. + The problem is that the initialized by ping subset of network parameters + is not sufficient for other protocols and particularly for TFTP which + requires the NetServerIp also. + + Signed-off-by: Michael Zaidman + Signed-off-by: Ben Warren + +commit b11f664f52c2855990107c18f242223377183575 +Author: Timur Tabi +Date: Thu Apr 9 10:27:05 2009 -0500 + + net: fix ULI 526x macro usage in netdev.h + + Change netdev.h to use CONFIG_ULI526X instead of CONFIG_ULI526. CONFIG_ULI526X + is used everywhere else, so that's the correct macro name. Without this fix, + Ethernet will not work on the Freescale MPC8610 HPCD. + + Signed-off-by: Timur Tabi + Signed-off-by: Ben Warren + +commit 7ee38c044ca5041d3378d6507580ea4ec344af96 +Author: David Brownell +Date: Sun Apr 12 15:38:06 2009 -0700 + + fix DaVinci NS16550_REG_SIZE regression + + Update the DaVinci DM6446 boards to use the new convention + for CONFIG_SYS_NS16550_REG_SIZE ... the size hasn't changed + from the original 4 bytes, but these chips are little-endian. + + (Resolves a regression added recently by the include/ns16550.h + patch to "Unify structure declaration for registers". The code + previously worked just fine because the registers were accessed + as host-endian words, not as bytes.) + + Signed-off-by: David Brownell + +commit dfc99e143fca44a492918ac6cf3f76ee9c2473a9 +Author: Mike Frysinger +Date: Sun Apr 12 22:29:20 2009 -0400 + + cmd_nand: drop duplicate NULL ptr check + + The first if statement checks for NULL ptrs, so there is no need to check + it again in later else cases (such as .oob). + + Signed-off-by: Mike Frysinger + CC: Scott Wood + +commit 7732cef2eeb4e339cfcd8553fab773af73a20805 +Author: David Brownell +Date: Mon Apr 13 08:03:38 2009 -0700 + + CMD_UBI != MTD_PARTITIONS + + Fix dependency goofage: it should certainly be possible to have the + partition support without bringing in UBI commands. + + Signed-off-by: David Brownell + Acked-by: Stefan Roese + +commit 6ebff365eb63093ca35b687316002535c6a18820 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Thu Apr 16 21:30:48 2009 +0200 + + at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000 + + The timer has been rewrote with a precision at ~0,18% + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Tested-by: Sergey Lapin + Tested-by: Eric BENARD + +commit f0a2c7b4b64eacd06bb272856bcc056be8719f5a +Author: Ilko Iliev +Date: Thu Apr 16 21:30:48 2009 +0200 + + at91: add support for the PM9263 board of Ronetix GmbH + + The PM9263 board is based on the AT91SAM9263-EK board. + + Here is the page on Ronetix website: + http://www.ronetix.at/starter_kit_9263.html + + Signed-off-by: Ilko Iliev + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit dc39ae9513c32dfeb9e018dc0d22c6484514fefb +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Thu Apr 16 21:30:44 2009 +0200 + + at91sam9/at91cap: improve clock framework + + calculate dynamically the clock rate and pllb setting for usb + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit dd7c302099ef5590069bdbf292aaa8230cd59de7 +Author: Stefan Roese +Date: Wed Apr 15 14:08:48 2009 +0200 + + ppc4xx: Disable POST memory test on NAND-booting Kilauea + + Don't run the memory POST on the NAND-booting version. It will + overwrite part of the U-Boot image which is already loaded from NAND + to SDRAM. We were just lucky that it booted at all with this SDRAM + test enabled. + + Signed-off-by: Stefan Roese + +commit 9a929170be89b27bce677504da27e88600c06c49 +Author: Stefan Roese +Date: Wed Apr 15 14:06:26 2009 +0200 + + ppc4xx: Disable POST memory test on NAND-booting Sequoia + + Don't run the memory POST on the NAND-booting version. It will + overwrite part of the U-Boot image which is already loaded from NAND + to SDRAM. We were just lucky that it booted at all with this SDRAM + test enabled. + + Signed-off-by: Stefan Roese + +commit 17c1b0e89b8be7d90f605eb19af9218c6275bfb3 +Author: Stefan Roese +Date: Wed Apr 15 11:32:53 2009 +0200 + + ppc4xx: Remove unused code for Sequoia NAND booting version + + The current define of get_bus_freq() in the CONFIG_NAND_SPL #ifdef is not + used at all. This patch changes it's define to the currently used value of + 133333333 and removes the unnecessary code. + + Signed-off-by: Stefan Roese + +commit cf9409885cbe01405bad76790e99f8adf3351f4d +Author: Stefan Roese +Date: Wed Apr 15 10:50:48 2009 +0200 + + ppc4xx: Add "booting from NAND" to 4xx NAND-booting targets + + This additional text in the bootup log helps to see if the board is + configured for NAND-booting. Especially helpful for boards that can + boot from NOR and NAND (e.g. most of the AMCC eval boards). + + Signed-off-by: Stefan Roese + +commit 5132106a27b8fb302677852b26ffd319b40d17e2 +Author: Stefan Roese +Date: Wed Apr 8 10:36:22 2009 +0200 + + ppc4xx: Fixup chip-selects in dtb for NAND-booting Sequoia + + Currently the NOR & NAND support in Linux only works for the "standard" + Sequoia, the version booting for NOR flash. The NAND-booting version + has the chip-selects swapped. Here the chip-select mappings: + + "Standard" NOR-booting version: + CS0 NOR + CS3 NAND + + NAND-booting version: + CS0 NAND + CS3 NOR + + With this path the dtb gets fixed-up, so that the correct chip-select + numbers are patched in the dtb enabling correct NOR & NAND support + in Linux on the NAND-booting Sequoia version. + + Signed-off-by: Stefan Roese + +commit aad4eca4ba8d597747199d8af723426681557dda +Author: Mike Frysinger +Date: Sat Apr 4 09:10:27 2009 -0400 + + Blackfin: audit UART for all known anomalies + + There is no code change here, just new comments, but this keeps me from + having to do another audit from scratch in the future. + + Signed-off-by: Mike Frysinger + +commit 8ef929afa43c77c9573caa57c6e17a97a33775c0 +Author: Mike Frysinger +Date: Sat Apr 4 08:40:13 2009 -0400 + + Blackfin: add check for anomaly 05000362 + + DESCRIPTION: + The column address width settings for banks 2 and 3 are misconnected in + the SDRAM controller. Accesses to bank 2 will result in an error if the + Column Address Width for bank 3 (EB3CAW ) is not set to be the same as + that of bank 2. + + WORKAROUND: + If using bank 2, make sure that banks 2 and 3 have the same column address + width settings in the EBIU_SDBCTL register. This must be the case + regardless of whether or not bank 3 is enabled. + + Signed-off-by: Mike Frysinger + +commit c2e07449f546fb375289cdac1a608fdc20357873 +Author: Mike Frysinger +Date: Sat Apr 4 08:29:55 2009 -0400 + + Blackfin: add comment about anomaly 05000430 avoidance + + Signed-off-by: Mike Frysinger + +commit 48ab1509254a4c175e4f65c478a978928ffe09ec +Author: Mike Frysinger +Date: Sat Apr 4 08:10:22 2009 -0400 + + Blackfin: add workaround for anomaly 05000242 + + DESCRIPTION: + If the DF bit is set prior to a hardware reset, the PLL will continue to + divide CLKIN by 2 after the hardware reset, but the DF bit itself will be + cleared in the PLL_CTL register. + + WORKAROUND: + Reprogram the PLL with DF cleared if the desire is to not divide CLKIN by + 2 after reset. + + Signed-off-by: Mike Frysinger + +commit ce1fe4ba6bb9df7c57351436fa17d1af8bbe7916 +Author: Mike Frysinger +Date: Sat Apr 4 08:09:24 2009 -0400 + + Blackfin: add workaround for anomaly 05000171 + + DESCRIPTION: + The Boot ROM is executed at power up/reset and changes the value of the + SICA_IWR registers from their default reset value of 0xFFFF, but does not + restore them. + + WORKAROUND: + User code should not rely on the default value of these registers. Set + the desired values explicitly. + + Signed-off-by: Mike Frysinger + +commit 51ee6e057f7a920e2a125cd9f985d10f625e355f +Author: Mike Frysinger +Date: Sat Apr 4 08:22:36 2009 -0400 + + Blackfin: update anomaly sheets + + Signed-off-by: Mike Frysinger + +commit a343ba87ea0320ca0a4ecfa2c42cd9d4f18883df +Author: Graf Yang +Date: Sat Apr 4 07:45:57 2009 -0400 + + Blackfin: nand: flush peripheral before polling it + + We need to make sure the data written to the nand flash controller makes + it there before we start polling its status register. Otherwise, we may + get stale data and return before the controller is actually ready. + + Signed-off-by: Graf Yang + Signed-off-by: Mike Frysinger + Acked-by: Scott Wood + +commit 3ccbfb25f48af78e7092ac75f3115e924e76c748 +Author: Remy Bohmer +Date: Sun Apr 5 11:43:28 2009 +0200 + + Support for PXA27X UDC. + + This Patch adds Support for PXA27X UDC. + (Rebased to drivers/usb reorganisation) + + Signed-off-by: Vivek Kutal + Signed-off-by: Remy Bohmer + +commit 2731b9a86685190d26b1883f27afda5ac8e1a313 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Apr 3 12:46:58 2009 +0200 + + drivers/usb: regorganisation + + move to linux usb driver organisation + + as following + + drivers/usb/gadget + drivers/usb/host + drivers/usb/musb + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Remy Bohmer + +commit d04371a116d102e587ba7aa4c329b441cdbea3f4 +Author: Todor I Mollov +Date: Sat Apr 4 06:53:06 2009 -0400 + + Blackfin: spi: make cs deassert function deterministic + + Blackfin SPI driver was not driving the SPI chip-select high before + putting the chip-select signals into tri-state mode. This is probably + something that slipped by unnoticed in most designs. If the signals are + put directly into a tri-state mode, then the board is relying on the + pull-up resistors to pull up the chip-select before the next transaction. + Most of the time this is fine, except when you have two transactions that + follow each other very closely, such as the flash erase and read status + register commands. In this case I was seeing a 500ns separation between + the transactions. In my setup, with a 10kOhm pull-up, it would meet + timing spec about half the time and resulted in intermittent errors. (A + stronger pull up would fix this, but our design is targeted for low power + consumption and a 3.3kOhm @ 3.3v is 3.3mW of needless power consumption.) + I modified the spi_cs_deactivate() function in bfin_spi.c to drive the + chip-selects high before putting them into tri-state. For me, this + resulted in a rise time of 5ns instead of the previous rise time of about + 1us, and fully satisfied the timing spec of the chip. + + Signed-off-by: Todor I Mollov + Signed-off-by: Mike Frysinger + +commit c6fadb9c73a6a3e0c7f20696e978304a593a8d2d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Dec 13 21:08:05 2008 +0100 + + integratorap: fix PCI support + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 1c397508c836dfcb01fb2471c71de0727051f117 +Author: Dirk Behme +Date: Mon Mar 30 21:15:23 2009 +0200 + + OMAP3: Update Overo pin mux for new expansion board + + A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and + switches. This patch changes the pinmux configuration for those pins. + They were previously set up for unused MMC3_DAT4-7. + + Signed-off-by: Steve Sakoman + Signed-off-by: Dirk Behme + +commit ab298231518675b3784aea88ee9b978438f99e63 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Apr 5 13:08:03 2009 +0200 + + arm: unify reset command + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit b3acb6cd4059dfb29a5e99095d802717f53ff784 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Apr 5 13:06:31 2009 +0200 + + arm: clean cache management + + unify arm cache management except for non standard cache as ARM7TDMI + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 677e62f43235de9a1701204d7bcea0fb3d233fa1 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Apr 5 13:02:43 2009 +0200 + + arm: update co-processor 15 access + + import system.h from linux + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 23e4af49e066a53cd3e3659b68ef90572d88de84 +Author: Guennadi Liakhovetski +Date: Sun Apr 5 00:42:02 2009 +0200 + + ARM: add the imx31_phycore_eet target to MAINTAINERS + + imx31_phycore_eet is a variant of the imx31_phycore board with a few + extensions, which justifies a separate entry in the MAINTAINERS list, + whereas normally all entries sharing a single configuration file and a + board/ directory have only one entry in MAINTAINERS. + + Reported-by: Wolfgang Denk + Signed-off-by: Guennadi Liakhovetski + +commit 69c5bf29908b3a7f8e23bd9891b7ecc5b21f23e5 +Author: Guennadi Liakhovetski +Date: Sun Apr 5 00:37:07 2009 +0200 + + ARM: fix out-of-tree build of imx31_phycore_eet + + Fix out-of-tree build of the imx31_phycore_eet target. + + Reported-by: Wolfgang Denk + Signed-off-by: Guennadi Liakhovetski + +commit 3c853f31d6a8e4407f73a2ca2c63d383a245f237 +Author: Jon Smirl +Date: Sat Apr 4 17:44:51 2009 -0400 + + mpc5200: reduce delays in i2c + + The previous code waited 1000us before checking i2c + status. Measurement shows i2c is usually ready in + under 50us. Change the polling interval to 15us, + loop 6,667 times to keep the polling timeout constant + at 100ms. + +commit 36003268968949110ef145d9f2eaf8439c96d25b +Author: Sanjeev Premi +Date: Fri Apr 3 14:00:07 2009 +0530 + + OMAP: Fix compile issue + + Fixes this compile error: + board.c: In function 'do_switch_ecc': + board.c:339: error: 'cmd_tbl_t' has no member named 'help' + make[1]: *** [board.o] Error 1 + make[1]: Leaving directory `/db/psp_git/users/a0756819/u-boot/cpu/arm_cortexa8/omap3' + make: *** [cpu/arm_cortexa8/omap3/libomap3.a] Error 2 + + This is due to the fact that current command uses long + help for the usage print even if the CONFIG_SYS_LONGHELP + is not enabled. (Thanks Jean-Christophe for explanation). + + Signed-off-by: Sanjeev Premi + +commit 342c1a5d9ab74febf3226a86216dc5aa05295d46 +Author: Minkyu Kang +Date: Fri Apr 3 09:56:16 2009 +0900 + + s3c64xx: fix the wrong gpio offset + + This patch fix the wrong gpio offset + + Signed-off-by: Minkyu Kang + +commit ab0689c316c9b2ee33f4de1c50263b64e539f12a +Author: Kyungmin Park +Date: Wed Nov 26 10:18:13 2008 +0900 + + Move machine specific code to board at s3c64xx (v2) + + Move machine specific code to smdk6400. + Some board use OneNAND instead of NAND. + + Some register MP0_CS_CFG[5:0] are controled by both h/w and s/w. + So it's better to use macro instead of hard-coded value. + + Signed-off-by: Kyungmin Park + +commit 767f3acd9f6e1dcb8ada926c333945382eddc7e8 +Author: Tom Rix +Date: Wed Apr 1 22:02:19 2009 -0500 + + ZOOM1 Remove legacy NAND defines + + Signed-off-by: Tom Rix + +commit 5891151707ee5902fe62d554c247f42865815757 +Author: Tom Rix +Date: Wed Apr 1 22:02:20 2009 -0500 + + OMAP3 Fix multiline formatting in board init files. + + Signed-off-by: Tom Rix + +commit c0a14aedc3440d6591b8c86d45861a0a8b46e11d +Author: Wolfgang Denk +Date: Sun Apr 5 00:27:57 2009 +0200 + + Update CHANGELOG, coding style cleanup. + commit f63728c804ab7413a67d70f6774cd30c3f7b40fb Author: Wolfgang Denk Date: Sun Apr 5 00:18:44 2009 +0200 -- 2.39.5