From 0683fb7242100a2a006d23627e9a53822136a615 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Mon, 28 Aug 2017 20:50:47 +1200 Subject: [PATCH] usb: doc: update README.usb for new config options A number of the config options for USB networking have been migrated to Kconfig. Update README.usb to reflect this. Signed-off-by: Chris Packham --- doc/README.usb | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/doc/README.usb b/doc/README.usb index fb7e688daf..6e46345cab 100644 --- a/doc/README.usb +++ b/doc/README.usb @@ -125,23 +125,27 @@ bootp To enable USB Host Ethernet in U-Boot, your platform must of course support USB with CONFIG_CMD_USB enabled and working. You will need to -add some config settings to your board header file: +add some config settings to your board config: -#define CONFIG_CMD_USB /* the 'usb' interactive command */ -#define CONFIG_USB_HOST_ETHER /* Enable USB Ethernet adapters */ +CONFIG_CMD_USB=y /* the 'usb' interactive command */ +CONFIG_USB_HOST_ETHER=y /* Enable USB Ethernet adapters */ and one or more of the following for individual adapter hardware: -#define CONFIG_USB_ETHER_ASIX -#define CONFIG_USB_ETHER_MCS7830 -#define CONFIG_USB_ETHER_SMSC95XX +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_LAN75XX=y +CONFIG_USB_ETHER_LAN78XX=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y As with built-in networking, you will also want to enable some network commands, for example: -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP +CONFIG_CMD_NET=y +CONFIG_CMD_PING=y +CONFIG_CMD_DHCP=y and some bootp options, which tell your board to obtain its subnet, gateway IP, host name and boot path from the bootp/dhcp server. These -- 2.39.5