From 073fcd34a90b522980a96d7a1b41f1be3ccdee08 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Mario=20Bl=C3=A4ttermann?= Date: Fri, 28 May 2010 10:28:41 +0200 Subject: [PATCH] Added page files for the new manual --- help/C/about.page | 44 ++++ help/C/basicusage.page | 90 +++++++ help/C/createnew.page | 93 +++++++ help/C/customize.page | 129 ++++++++++ help/C/customtemplate.page | 38 +++ help/C/editprop.page | 229 +++++++++++++++++ help/C/index.page | 50 ++++ help/C/labelprop.page | 34 +++ help/C/license.page | 59 +++++ help/C/mancreate.page | 488 +++++++++++++++++++++++++++++++++++++ help/C/merge-ex1.page | 110 +++++++++ help/C/merge-ex2.page | 109 +++++++++ help/C/merge-ex3.page | 109 +++++++++ help/C/merge-ex4.page | 28 +++ help/C/merge.page | 37 +++ help/C/mergefeatures.page | 65 +++++ help/C/multifile.page | 39 +++ help/C/newlabel.page | 35 +++ help/C/printfile.page | 118 +++++++++ help/C/select.page | 129 ++++++++++ 20 files changed, 2033 insertions(+) create mode 100644 help/C/about.page create mode 100644 help/C/basicusage.page create mode 100644 help/C/createnew.page create mode 100644 help/C/customize.page create mode 100644 help/C/customtemplate.page create mode 100644 help/C/editprop.page create mode 100644 help/C/index.page create mode 100644 help/C/labelprop.page create mode 100644 help/C/license.page create mode 100644 help/C/mancreate.page create mode 100644 help/C/merge-ex1.page create mode 100644 help/C/merge-ex2.page create mode 100644 help/C/merge-ex3.page create mode 100644 help/C/merge-ex4.page create mode 100644 help/C/merge.page create mode 100644 help/C/mergefeatures.page create mode 100644 help/C/multifile.page create mode 100644 help/C/newlabel.page create mode 100644 help/C/printfile.page create mode 100644 help/C/select.page diff --git a/help/C/about.page b/help/C/about.page new file mode 100644 index 00000000..d32babd6 --- /dev/null +++ b/help/C/about.page @@ -0,0 +1,44 @@ + + + + + + + Information about gLabels. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + About <app>gLabels</app> + +

gLabels was written by Jim Evins + (evins@snaught.com). To find more information about + gLabels, please visit the + gLabels Web + page.

+

+ To report a bug or make a suggestion regarding this application or + this manual, follow the directions at the + gLabels Contact Page. +

+ +

This program is distributed under the terms of the GNU + General Public license as published by the Free Software + Foundation; either version 2 of the License, or (at your option) + any later version. A copy of this license can be found at this + link, or in the file + COPYING included with the source code of this program.

+ diff --git a/help/C/basicusage.page b/help/C/basicusage.page new file mode 100644 index 00000000..e2f22b1d --- /dev/null +++ b/help/C/basicusage.page @@ -0,0 +1,90 @@ + + + + + + + Handling files and quit the application. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + Basic usage + +
+ To open a file + +

To open a file, choose + FileOpen + to display the Open File dialog. + Select the file that you want to open, then click + OK. The file is displayed in the display area + of the gLabels window.

+ +

You can also open multiple files in + gLabels. The application creates a separate + application window for each open file.

+ +

The application records the paths and filenames of the + most recent files that you have edited and displays the files as menu + items on the FileRecent Files + menu.

+
+ +
+ To close a file + +

To close the current document, choose + File + Close to close the application + window. If the current document is modified, a confirmation dialog + will be presented, allowing you to save the document or cancel + the command. If the window being closed is the only open window, + gLabels will exit.

+
+ +
+ To save a file + +

You can save files in the following ways:

+ + + +

To save changes to an existing file, choose + File + Save.

+ + + + +

To save a new file or to save an existing file under a new + filename, choose File + Save As. Enter a name + for the file in the Save As dialog box, + then click OK.

+ + + +
+ +
+ To quit <app>gLabels</app> + +

To quit gLabels, choose File + Quit. This is equivalent to closing all open windows. + See .

+
+ diff --git a/help/C/createnew.page b/help/C/createnew.page new file mode 100644 index 00000000..963ff635 --- /dev/null +++ b/help/C/createnew.page @@ -0,0 +1,93 @@ + + + + + + + Create new objects within your document. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + To create new objects + +

Objects are created by choosing the appropriate selection under + the ObjectsCreate Object submenu + or the Drawing Toolbar. This will place the display area into + object creation mode as indicated by its cursor. To return to the default + object selection mode without creating an object, choose + ObjectsSelect Mode. This will + return the display area's cursor to the default selection arrow.

+ +

The following describes the object creation mode for each object + type:

+ +
+ Text +

Click the desired location of the upper left corner of the + text object. New text objects are initialized with the + string "Text." To change this text, or other properties, see + .

+
+ +
+ Box +

Click the desired location of the upper left corner of the + box object and drag to the desired location of the lower right + corner. If you simply click in a single location, a square + box will be created. To change properties of the box object, see + .

+
+ +
+ Line +

Click the desired location of one end of the + line object and drag to the desired location of the other end. + If you simply click in a single location, a diagonal line + will be created. To change properties of the line object, see + .

+
+ +
+ Ellipse +

Click the desired location of the upper left corner of the + ellipse object and drag to the desired location of the lower + right corner. If you simply click in a single location, a circle + will be created. To change properties of the ellipse object, see + .

+
+ +
+ Image +

Click the desired location of the upper left corner of the + image object and drag to the desired location of the lower + right corner. If you simply click in a single location, a square + will be created. New image objects are initialized with a + simple checkerboard image. To change this image, or other + properties of the image object, see + .

+
+ +
+ Barcode +

Click the desired location of the upper left corner of the + barcode object. New barcode objects are initialized to a + POSTNET barcode with representative data. To change data + and properties of the barcode object, see + .

+
+ + diff --git a/help/C/customize.page b/help/C/customize.page new file mode 100644 index 00000000..f39468c5 --- /dev/null +++ b/help/C/customize.page @@ -0,0 +1,129 @@ + + + + + + Customize gLabels to match your needs. + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + + + Settings +

To configure gLabels, choose + + Settings + Preferences + . The + Preferences dialog contains the following tabbed + sections:

+ +
+ Locale +
+ Units +

Use this radio button group to specify your preferred units. + Select one of the following options:

+ + +

Points

+

Use points (1 point = 1/72 in = 0.352778 mm).

+ + +

Inches

+

Use Inches.

+ + +

Millimeters

+

Use Millimeters.

+ + +

Default: Inches.

+
+ +
+ Default page size +

Use this radio button group to specify your prefered page size. + This will make it quicker for you to locate media types when creating a new + label or card.

+ + +

US Letter

+

Most of your media will be of the US Letter page size (8.5 x 11 inches).

+ + +

ISO A4

+

Most of your media will be of the ISO A4 page size (210 x 297 mm).

+ + +

Default: US Letter.

+
+
+ +
+ Object Defaults + +
+ Text +

Use these controls to set the default properties of new text objects. + These properties are:

+ + +

Font

+

These controls are used to select font family and font size, and + whether the font should bold or in italics.

+ + +

Color

+

This control selects the default text color.

+ + +

Alignment

+

These controls are used to select the default text alignment (left, center or right).

+ + +
+ +
+ Line +

Use these controls to set the default properties of lines and outlines of + new objects. These properties are:

+ + +

Width

+

These controls are selects the default line width.

+ + +

Color

+

This control selects the default line color.

+ + +
+ +
+ Fill +

Use these controls to set the default fill properties of + new objects. These properties are:

+ + +

Color

+

These controls are selects the default fill color.

+ + +
+
+ + diff --git a/help/C/customtemplate.page b/help/C/customtemplate.page new file mode 100644 index 00000000..2de0b9da --- /dev/null +++ b/help/C/customtemplate.page @@ -0,0 +1,38 @@ + + + + + + + Create your own templates for stationery products. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + To create a custom template + +

To create a new custom template, choose + File + Template Designer ... + to display the Template Designer dialog. + This dialog will assist you in creating a custom template for + most types of label or card stationery that you may encounter.

+ +

If you prefer, you can create your templates manually. + For this option see +

+ + diff --git a/help/C/editprop.page b/help/C/editprop.page new file mode 100644 index 00000000..39f9e0f2 --- /dev/null +++ b/help/C/editprop.page @@ -0,0 +1,229 @@ + + + + + + + Change the properties of objects. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + To edit object properties + +
+ +

Most object properties can be modified through the object + editor sidebar, illustrated below. To use the object editor, + a single object must first be selected. See + .

+ + + +

Print Copy Controls

+ + + +

The object editor will contain a subset of the following + tabbed sections, depending on object type:

+ +
+ Text Tabbed Section (Text objects) + +

This section contains a small editor for changing the content + of a text object. It also contains a dropdown menu of available + document merge keys, that can be inserted into text.

+ +
+ +
+ Image Tabbed Section (Image objecs) + +

This section contains a file entry with preview to select + image files. The browse button can be used to easily locate + image files. Alternatively, a document merge key can be used + instead to provide a filename at print time.

+ +
+ +
+ Data Tabbed Section (Barcode objecs) + +

This section contains a text entry to enter literal barcode + data. Alternatively, a document merge key can be used to + provide this data at print time.

+ +
+ +
+ Style Tabbed Section (Text objects) + +

This section contains controls to select text properties, + including font family, font size, font weight, color, and + text justification.

+ +
+ +
+ Style Tabbed Section (Barcode objecs) + +

This section contains controls to select barcode properties, + including barcode style, color, whether to print text, and whether + to include a checksum digit.

+ +
+ +
+ Line Tabbed Section + +

This section contains controls to select properties of lines + and outlines. These properties include line width and color.

+ +
+ +
+ Fill Tabbed Section + +

This section contains controls to select fill properties of box + and ellipse objects. Currently the only fill property is fill + color.

+ +
+ +
+ Size Tabbed Section (All except line objects) + +

This section contains controls to select the width and height + of an object. A checkbox is provided, so that the current aspect + ratio can be locked while manipulating the width and height controls. + Image objects also provide a button to reset the size to the + image's natural size (Assumes 72DPI).

+ +
+ +
+ Size Tabbed Section (Line objects) + +

This section contains controls to select the length and angle + of a line object.

+ +
+ +
+ Position Tabbed Section + +

This section contains controls to change the position of an + object.

+ +
+ + +
+ Shadow Tabbed Section (All except image and barcode objects) + +

This section contains controls to add a shadow to an object.

+ +
+ + +
+ + +
+ Other Manipulations of Objects + +

Objects can also be manipulated in the following ways.

+ +
+ Moving and Resizing Objects + +

Objects can be moved by simply clicking on a selected + object and dragging the object to its new location. If the object + is part of an aggregate selection, all objects in the selection + will move with the object being dragged, maintaining their relative + positions to one another. If no object is selected, clicking on + an object will create a new selection containing that object. + See .

+ +

A selected object can be resized by clicking one of its resize + handle and dragging it to obtain the new size.

+ +
+ +
+ Changing Stacking Order + +

Stacking order refers to relative position in the z-axis of + objects. That is when objects overlap, which object will appear + on top of the other. By default, newer objects will appear above + older objects. To change this order, select one or more objects + and choose Objects + Order + Bring to Front + to raise the selection to the top of the stacking + order, or choose Objects + Order + Send to Back + to lower the selection to the bottom of the + stacking order. These menuitems are also available by right-clicking + the display area when there is a non-empty selection.

+ +
+ +
+ Rotating and Flipping Objects + +

Objects can be rotated 90 degrees in either direction, or flipped + horizontally or vertically, by choosing the appropriate menuitem + in the Objects + Rotate/Flip sub-menu. These + menuitems are also available by right-clicking + the display area when there is a non-empty selection.

+ +
+ +
+ Aligning Objects + +

Objects can be aligned horizontally or vertically, relative to + one another, or relative to the center line of the label, by + choosing the appropriate menuitem from the + Objects + Align Horizontal + or Objects + Align Horizontal sub-menus. + These menuitems are also available by right-clicking + the display area when there is a non-empty selection.

+ +
+ +
+ Using the Property Bar + +

The property bar can be used to change some common properties + of objects en-masse. These properties include font family, font + size, font weight, text alignment, text color, fill color, line + or outline color, and line width. The property bar also controls + the defaults for these properties for any newly created objects. +

+ +
+ + + +
+ + diff --git a/help/C/index.page b/help/C/index.page new file mode 100644 index 00000000..31334229 --- /dev/null +++ b/help/C/index.page @@ -0,0 +1,50 @@ + + + + gLabels label and business card designer + gLabels label and business card designer + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + + <media type="image" mime="image/png" src="figures/glabels-logo.png">gLabels logo</media> + gLabels label and business card designer + + +
+ Introduction +

+ The gLabels application is a lightweight program for creating labels and + business cards for the GNOME desktop environment. It is designed to work with + various laser/ink-jet peel-off label and business card sheets that you'll find + at most office supply stores. +

+
+ +
+ Usage +
+ +
+ Document Merging +
+ +
+ Advanced usage +
+ + diff --git a/help/C/labelprop.page b/help/C/labelprop.page new file mode 100644 index 00000000..d77e2bcd --- /dev/null +++ b/help/C/labelprop.page @@ -0,0 +1,34 @@ + + + + + + + How to change the properties of a label or business card. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + To change label properties + +

To change the media type and/or orientation of a label, choose + File + Properties to display the + Label properties dialog. Select the + new media type and orientation for the document, then click + OK.

+ + diff --git a/help/C/license.page b/help/C/license.page new file mode 100644 index 00000000..312b6cfa --- /dev/null +++ b/help/C/license.page @@ -0,0 +1,59 @@ + + + + + + Legal information. + + + License +

+ + This work is distributed under a CreativeCommons Attribution-Share Alike + 3.0 Unported license. +

+

+ You are free: +

+ + + <em>To share</em> +

To copy, distribute and transmit the work.

+ + + <em>To remix</em> +

To adapt the work.

+ + +

+ Under the following conditions: +

+ + + <em>Attribution</em> +

+ You must attribute the work in the manner specified by the author or + licensor (but not in any way that suggests that they endorse you or + your use of the work). +

+ + + <em>Share Alike</em> +

+ If you alter, transform, or build upon this work, you may distribute the + resulting work only under the same, similar or a compatible license. +

+ + +

+ + For the full text of the license, see the + CreativeCommons website, + or read the full Commons Deed. +

+ diff --git a/help/C/mancreate.page b/help/C/mancreate.page new file mode 100644 index 00000000..1144d5b8 --- /dev/null +++ b/help/C/mancreate.page @@ -0,0 +1,488 @@ + + + + + + + Create your templates manually. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + Manually creating new templates + +

Predefined templates are defined by XML files located in + ${prefix}/share/glabels/, + where ${prefix} is usually something like + /usr/local or /usr depending + on the configuration option prefix. gLabels will + use all files of the form *-templates.xml + or *.template, that it finds in + ${prefix}/share/glabels/ and + ${HOME}/.glabels/. + Additional templates can be added by creating additional + *.template files in either of these directories. +

+ +

The format for these files is defined in the DTD: + glabels-2.2.dtd. + (This DTD also describes other XML formats used by glabels.)

+ +
+ Assumptions/caveats + + +

A sheet contains only one size of label or card (if a sheet + contains more than one size of item, it can be split into + multiple templates for multiple pass printing)

+ + +

Distances can be expressed in units of pt, + in, mm, + cm, or pc. For example: + "1.0in" or "2.54cm". If no + units are specified, computer points (pt) will + be assumed (1 pt = + 1/72 in = 0.352778 mm). +

+ + +
+ +
+ Template Files + + +<?xml version="1.0"?> +<Glabels-templates> + + ...templates... + +</Glabels-templates> + +
+ + +
+ Example Template + + <Template brand="Avery" part="8160" size="US-Letter" description="Mailing Labels"> + <Meta category="label"/> + <Meta category="mail"/> + <Meta product_url="http://www.avery.com/avery/en_us/"/> + <Label-rectangle id="0" width="189pt" height="72pt" round="5pt"> + <Markup-margin size="5pt"/> + <Layout nx="3" ny="10" x0="11.25pt" y0="36pt" dx="200pt" dy="72pt"/> + </Label-rectangle> + <Alias brand="Avery" part="5160"/> + <Alias brand="Avery" part="6233"/> + </Template> + +
+ +
+ Template Node + +

A Template node describes a single stationary + product. It must contain one instance of any type of Label node + (Label-rectangle, + Label-round, or Label-cd). + This node can be followed by zero or more + Alias nodes.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

Property

Description

brand

Brand or manufacturer of stationary product. E.g. "Avery"

part

Part number or name of stationary product. E.g. "8160"

size

Size of sheet. E.g., "US-Letter," "A4", ...

description

Description of stationary product. E.g, "Mailing Labels."

_description

Translatable description of stationary product. E.g, "Mailing Labels." (Only useful for predefined templates)

width

Page width. Only valid if size="Other"

height

Page height. Only valid if size="Other"

+ +
+ +
+ Meta Node + +

A Meta node contains some additional properties of that product. + This node may appear more than once, with a subnode each.

+ + + + + + + + + + + + + + +

Subnode

Description

category

The category which this product is assigned to. The value + of this category is used by the gLabels' template chooser to filter the + view to display only mailing labels, or labels in common and suppress any other products + which the user don't want to find. One product can be assigned to several categories.

product_url

This address points to the vendor's website. Ideally, + the link shows the URL of that certain product, if available.

+ +
+ +
+ Label-rectangle Node + +

A Label-rectangle node describes the + dimensions of a single label or business card that is rectangular + in shape (may have rounded edges).

+ + + + + + + + + + + + + + + + + + + + + + + + + + +

Property

Description

id

Reserved for future use. Should always be 0.

width

Width of label/card

height

Heigth of label/card

round

Radius of corners. For items with square edges (business cards), the radius should be 0.

x_waste

Amount of horizontal waste (over-print) to allow. This is useful + for minimizing alignment problems when using non-white + backgrounds (e.g. images).

y_waste

Amount of vertical waste (over-print) to allow. This is useful + for minimizing alignment problems when using non-white + backgrounds (e.g. images).

+ + + +

Label-rectangle parameters

+ + +
+ +
+ Label-ellipse Node + +

A Label-ellipse node describes the + dimensions of a single label or business card that is elliptic + in shape.

+ + + + + + + + + + + + + + + + + + + + +

Property

Description

id

Reserved for future use. Should always be 0.

width

Width of the ellipse

height

Heigth of the ellipse

waste

Amount of waste (over-print) to allow. This is useful + for minimizing alignment problems when using non-white + backgrounds (e.g. images).

+ + + +

Label-ellipse parameters

+ + +
+ +
+ Label-round Node + +

A Label-round node describes the dimensions + of a simple round label (not a CD).

+ + + + + + + + + + + + + + + + + +

Property

Description

id

Reserved for future use. Should always be 0.

radius

Radius (1/2 diameter) of label

waste

Amount of waste (over-print) to allow. This is useful + for minimizing alignment problems when using non-white + backgrounds (e.g. images).

+
+ +
+ Label-cd Node + +

A Label-round node describes the dimensions + of a CD, DVD, or business card CD.

+ + + + + + + + + + + + + + + + + + + + + + + + +

Property

Description

id

Reserved for future use. Should always be 0.

radius

Outer radius of label

hole

Radius of concentric hole

width

If present, the label is clipped to the given width. + (Useful for "business card CDs").

heigth

If present, the label is clipped to the given height. + (Useful for "business card CDs").

waste

Amount of waste (over-print) to allow. This is useful + for minimizing alignment problems when using non-white + backgrounds (e.g. images).

+ + + +

CD label parameters

+ + +
+ +
+ Markup-margin Node + +

A Markup-margin describes a margin along + all edges of a label.

+ + + + + + + + + + + +

Property

Description

size

Size of the margin. I.e. the distance of the margin + line from the edge of the card/label.

+
+ +
+ Markup-line Node + +

A Markup-line describes a markup line.

+ + + + + + + + + + + + + + + + + + + + +

Property

Description

x1

x coordinate of 1st endpoint of the line segment.

y1

y coordinate of 1st endpoint of the line segment.

x2

x coordinate of 2st endpoint of the line segment.

y2

y coordinate of 2st endpoint of the line segment.

+
+ +
+ Markup-circle Node + +

A Markup-circle describes a markup circle.

+ + + + + + + + + + + + + + + + + +

Property

Description

x0

x coordinate of circle origin (center).

y0

y coordinate of circle origin (center).

radius

Radius of circle.

+
+ +
+ Markup-rect Node + +

A Markup-rect describes a markup rectangle.

+ + + + + + + + + + + + + + + + + + + + + + + +

Property

Description

x1

x coordinate of upper left corner of rectangle.

y1

y coordinate of upper left corner of rectangle.

w

Width of rectangle.

h

Height of rectangle.

r

Radius of rounded corners of rectangle.

+
+ +
+ Layout Node + +

A label node may contain multiple Layout + children. If labels are arranged in a simple grid pattern, only + one layout is needed. However, if labels are arranged in multiple + grids, such as a running bond pattern, multiple + layout tags can be used. Note: a single label + can always be treated as a grid of one.

+ + + + + + + + + + + + + + + + + + + + + + + + + + +

Property

Description

nx

Number of labels/cards across in the grid (horizontal)

ny

Number of labels/cards across in the grid (vertical)

x0

Distance from left edge of sheet to the left edge of + the left column of cards/labels in the layout.

y0

Distance from the top edge of sheet to the top edge of + the top row of labels/cards in the layout.

dx

Horizontal pitch of grid.

dy

Vertical pitch of grid.

+ + + +

Layout Parameters

+ + +
+ +
+ Alias Node + +

An Alias node provides the name of a + product with the same size and layout characteristics as the + parent template.

+ + + + + + + + + + + + + + +

Property

Description

brand

The brand or manufacturer of the equivalent product.

part

The part number of the equivalent product.

+ +
+ + + diff --git a/help/C/merge-ex1.page b/help/C/merge-ex1.page new file mode 100644 index 00000000..1d2de481 --- /dev/null +++ b/help/C/merge-ex1.page @@ -0,0 +1,110 @@ + + + + + + + Create name tags from a CSV file. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + Example 1: Name Tags + +

In this example we are organizing an orientation party for the new + crew members of our ship. We have a list of freshman crew members that we + created in gnumeric and exported as the following + CSV file. We could have created this file by using a text editor, but heck it + is the 23rd century.

+ + +Name,Department,SN +"Jim Kirk",Management,"SC937-0176 CEC" +"Mr. Spock",Sciences,S179-276SP +"Leonard McCoy",Medicine,unknown +"Montgomery Scott",Engineering,SE-197-54T + + +

In gLabels we have created a new glabels + document using the Avery 5395 "Name Badge Labels" template. Next we use the + Objects + Merge Properties menu item to display + the merge properties dialog. We use this dialog to + select the source type (in our case CSV) and the merge source (filename) as + shown.

+ + + +

Merge properties dialog

+ + + +

Before applying the merge source, we uncheck the first record since it is only + column headers from our original gnumeric spreadsheet + and would simply waste our first label. We could also unselect any other records + that we didn't want to print a label for.

+ +

We can also view each record in more detail by clicking on the appropriate + expander (the little triangles) as shown. Once we are satisfied with the + selections in this dialog we click OK to accept the + changes.

+ +

Now we start adding objects to our glabels document as shown.

+ + + +

Adding objects

+ + + +

In this example we have added three text objects and a barcode object. The + first text object contains only simple literal text ("Hello, my name is"). The + second text object contains a single merge field ("${1}") corresponding to the + first field of a record (first column of a line) which contains the new crew + member's full name. The third text field contains both literal text + ("Department: ") followed by a single merge field ("${2}") corresponding to + the second field or the crew member's department. The barcode object is + configured to use field (or key) "3" which contains our crew member's + starfleet serial number.

+ +

Now we can print our name tags by selecting the + File + Print menu item. This will display + print dialog as shown below.

+ + + +

Printing name tags

+ + + +

Just to make sure our labels are going to look okay, we select the + Print outlines option and click + Print Preview. This will display a print preview dialog + as shown below.

+ + + +

Name tags preview

+ + + +

Everything looks good, so we can now load up our printer with + the appropriate label stock, print our name tags and start beaming our guests + aboard.

+ + + diff --git a/help/C/merge-ex2.page b/help/C/merge-ex2.page new file mode 100644 index 00000000..167bad42 --- /dev/null +++ b/help/C/merge-ex2.page @@ -0,0 +1,109 @@ + + + + + + + Create address labels from a CSV file. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + Example 2: Address labels + +

In this example we are going to throw a party and need to print mailing + address labels for our invitations. We have a list of our closest friends + that we created in gnumeric and exported as the + following CSV file. It should be noted that not everyone has a middle initial or + a two line address.

+ + +LAST,FIRST,MI,ADDR1,ADDR2,CITY,STATE,ZIP +,,,,,,, +Critter,Ess,S,"123 Faux St.",,Alexandria,VA,22310 +Doe,John,,"Apt 1X","451 Mystery St.",Trenton,NJ,08601 +Summers,Joyce,,"1630 Revello Dr",,Sunnydale,CA,95037 +McGarret,Steve,O,"404 Piikoi Street",,Honolulu,HI,96813 +Kramer,Cosmo,,"Apt 5B","129 W. 81 St.","New York",NY,10024-7207 + + +

In glabels we have created a new glabels + document using the Avery 5512 "Address Labels" template. Next we use the + Objects + Merge Properties menu item to display + the merge properties dialog. We use this dialog to + select the source type (in our case CSV) and the merge source (filename) as + shown.

+ + + +

Merge properties dialog

+ + + +

Before applying the merge source, we uncheck the first record since it is only + column headers from our original gnumeric spreadsheet + and would simply waste our first label. We also unselect the second record + which is empty (an artifact of our original spreadsheet). We could also unselect + any other records that we didn't want to print a label for.

+ +

We can also view each record in more detail by clicking on the appropriate + expander (the little triangles) as shown. Once we are satisfied with the + selections in this dialog we click OK to accept the + changes.

+ +

Now we start adding objects to our glabels document as shown.

+ + + +

Adding objects

+ + + +

In this example we have a single text object. This text object contains + all of our merge fields organized on multiple lines as a mailing address. + Notice that fields ${4} and ${5} (corresponding to ADDR1 and ADDR2) are each + located with no other text on their own lines. When + glabels encounters a field as the only text on + a line, it will not expand the line if the field is empty.

+ +

Now we can print our address labels by selecting the + File + Print menu item. This will display + print dialog as shown below.

+ + + +

Printing address labels

+ + + +

Just to make sure our labels are going to look okay, we select the + Print outlines option and click + Print Preview. This will display a print preview dialog + as shown below.

+ + + +

Address labels preview

+ + + +

Everything looks good, so we can now load up our printer with + the appropriate label stock, print our address labels and start mailing + our party invitations.

+ + diff --git a/help/C/merge-ex3.page b/help/C/merge-ex3.page new file mode 100644 index 00000000..6c51b90b --- /dev/null +++ b/help/C/merge-ex3.page @@ -0,0 +1,109 @@ + + + + + + + Create address labels from the Evolution address book entries. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + Example 3: Address Labels Using the <app>Evolution</app> Addressbook + +

Our last party was a great success, and now we need to print mailing + address labels for the invitations to a new one. To simplify this, we can use + the Evolution addressbook, because the address + data of all our friends is stored there.

+ + +

Depending on how your copy of gLabels was packaged, this option could be unavailable. + Support for the Evolution addressbook will only be available + if the evolution-data-server and its development files + were present when gLabels was built. Please keep this in mind if you build gLabels + directly from source.

+ +

If the gLabels package from your distribution lacks this support, + you may wish to contact the package maintainer or file a bug against the package + to request it.

+ + +

In glabels we have created a new gLabels + document using the Avery 5512 "Address Labels" template. Next we use the + Objects + Merge Properties menu item to display + the Merge properties dialog. We use this dialog to + select the source type (in our case Data from default Evolution + addressbook) as shown.

+ + + +

Merge properties dialog

+ + + +

Once we have chosen Data from default Evolution addressbook + as our merge source, we will get a full list of its content. Initially, + all entries are checked. Assuming we were planning a really big party, we could + leave this selection untouched (but let's keep our budget in mind). We will now select or + unselect certain entries by clicking on the appropriate checkboxes, or we could use + the Select all and Unselect all + buttons to activate or deactivate all entries in the address book.

+ +

We can also view each entry in more detail by clicking on the appropriate + expander (the little triangles) as shown. Once we are satisfied with the + selections in this dialog, we will click the OK button to + accept the changes.

+ +

Now we start adding objects to our glabels document as shown.

+ + + +

Adding objects

+ + + +

In this example we have a single text object again. This text object contains + all of our merge fields organized on multiple lines as a mailing address.

+ +

Now we can print our address labels by selecting the + File + Print menu item. This will display + the print dialog as shown below.

+ + + +

Printing address labels

+ + + +

Just to make sure our labels are going to look okay, we select the + Print outlines option and click + Print Preview. This will display a print preview dialog + as shown below.

+ + + +

Addess labels preview

+ + + +

Everything looks good, so we can now load up our printer with + the appropriate label stock, print our address labels and start mailing + our party invitations.

+ + + diff --git a/help/C/merge-ex4.page b/help/C/merge-ex4.page new file mode 100644 index 00000000..52951131 --- /dev/null +++ b/help/C/merge-ex4.page @@ -0,0 +1,28 @@ + + + + + + + Create address labels from a vCard file. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + Example 4: Address Labels Using a vCard file + + + diff --git a/help/C/merge.page b/help/C/merge.page new file mode 100644 index 00000000..033ebd0e --- /dev/null +++ b/help/C/merge.page @@ -0,0 +1,37 @@ + + + + + + + Merge a data source to create multiple documents. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + Document merge tutorial + +

Document Merge (sometimes called "Mail Merge") is a powerful + feature that allows a unique label or card to be printed for each + record in an external data source. It is however, the most mis-understood + feature of glabels. The following examples + will step through a couple of common tasks using the document merge + feature.

+ +
+
+ + diff --git a/help/C/mergefeatures.page b/help/C/mergefeatures.page new file mode 100644 index 00000000..e3255275 --- /dev/null +++ b/help/C/mergefeatures.page @@ -0,0 +1,65 @@ + + + + + + + What you may expect from a document merge. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + Performing a document merge + +

Document Merge (sometimes called "Mail Merge") is a powerful + feature that allows a unique label or card to be printed for each + record in an external data source.

+ +

The first step to performing a document merge is to prepare + a source document that contains your merge data. This data could + be mailing addresses or any other data that you wish to create + unique labels or cards for. Currently back-ends only exist for + text files and the evolution data server -- others are planned. The currently + supported text-file format is very simple: each line is a record; + fields are delimited by commas (CSV), tabs, or colons; and newlines + can be embedded into fields by using the "\n" entity. This file + could be created using any text editor or could be created by + another program or script. A common way of creating CSV files is + to export them from a spreadsheet program.

+ +

A label must then be configured to "point at" this data file. + To configure the merge properties of a document, choose + Objects + Merge Properties menu item + to display the merge properties dialog. This + dialog is used to select the exact data file format and file + name (location) of the merge data.

+ +

Finally, once the label has been configured for a data file, + field keys can be inserted into text objects and used as source + or data for barcode objects and image filenames for image objects. + See for more information + on using merge data for these object types.

+ +

Now that your label is configured, gLabels will print a unique + label for each record in your source document -- substituting fields + from each record for field keys in the all text, barcode, and + image objects.

+ +

See for a detailed + tutorial on the document merge feature.

+ + diff --git a/help/C/multifile.page b/help/C/multifile.page new file mode 100644 index 00000000..7aa7c9a9 --- /dev/null +++ b/help/C/multifile.page @@ -0,0 +1,39 @@ + + + + + + + How to open multiple files at once by using the command line.. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + To open multiple files from the command line + +

You can run gLabels from a command line + and open a single file or multiple files. To open multiple files from + a command line, type the following command, then press + Return:

+ +

glabels + file1.glabels file2.glabels file3.glabels +

+ +

When the application starts, the files that you specify are + displayed in separate gLabels windows.

+ + diff --git a/help/C/newlabel.page b/help/C/newlabel.page new file mode 100644 index 00000000..4b2809eb --- /dev/null +++ b/help/C/newlabel.page @@ -0,0 +1,35 @@ + + + + + + + Create a new label or card in gLabels. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + To create a new label or card + +

To create a new label or business card, choose + FileNew + to display the New Label or Card dialog. Select + the media type and orientation for the new document, + then click OK. A new document is + displayed in the display area of the gLabels + window.

+ + diff --git a/help/C/printfile.page b/help/C/printfile.page new file mode 100644 index 00000000..f55a6c02 --- /dev/null +++ b/help/C/printfile.page @@ -0,0 +1,118 @@ + + + + + + + How to print your labels and cards. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + To print labels and cards + +

To print labels or cards, choose + FilePrint + to display the Print dialog. + Once print options have been selected, click Print + to print the labels or cards. To simply preview the results, + click Print Preview instead.

+ +

The Print dialog allows you to specify the + following print options:

+ +
+ The Labels Tab of the Print Dialog + +
+ Print control (Simple) + +

For simple labels or cards (no document merge), the job + tabbed section contains the following copy controls.

+ + + +

Print Copy Controls

+ + + +

The number of copies of the label can be selected by + choosing the number of full sheets to print, or a specific + subset of labels on a single sheet.

+ +

The mini-preview can also be used to graphically select + the subset of labels by clicking the first label on the + mini-preview and dragging to the last label.

+ +
+ +
+ Print control (Merge) + +

For labels or cards using the document merge (also known + as "mail merge") capability, the job tabbed section contains + the following merge controls instead of copy controls.

+ + + +

Print Document Merge Controls

+ + + +

The total number of labels or cards printed is the + product of the number of records in the merge source and + the number of copies selected. If multiple copies are + selected, these can be either collated (copies of the + same record grouped together) or un-collated (one copy + each record is printed before next copy).

+ +

Printing can begin on any label on the first sheet. + This can be selected with the Start on + label spinbutton.

+ +

The mini-preview can also be used to graphically select + this first label, by clicking on the desired label in the + mini-preview.

+ +
+ +
+ Options +

The following options can also be selected.

+ + +

print outlines

+

Print outlines of labels. This option is useful for + dry-runs, to test printer alignment.

+ + +

print in reverse

+

Prints the labels as mirror images. This option is + useful for printing on clear labels that will be viewed + from the reverse side (e.g. in a car window).

+ + +

print crop marks

+

Prints crop marks along the edge of the sheet. + This option is useful for printing on blank stock, to + be cut after printing. This option does not work well + with all templates.

+ + +
+
+ + diff --git a/help/C/select.page b/help/C/select.page new file mode 100644 index 00000000..dc3fea77 --- /dev/null +++ b/help/C/select.page @@ -0,0 +1,129 @@ + + + + + + + How to select objects. + + + Jim Evins + evins@snaught.com + + + Mario Blättermann + mariobl@gnome.org + + +

Creative Commons Share Alike 3.0

+ + + + To select objects + +

A prerequisite for performing operations on objects is the + selection of individual objects or groups of objects. The + display area must be in the object selection mode to create new + selections, as indicated by an arrow cursor. The object + selection mode is selected by the + Objects + Select Mode menu item, + or the corresponding command on the Drawing + Toolbar.

+ +
+ Selecting a single object +

A single object can be selected simply by clicking + on the desired object in the display area. + Once selected the object will be highlighted with a set of + resizing handles.

+
+ +
+ Aggregate object selections +

Multiple objects can be selected by first selecting the first + object as above and then by holding the Ctrl + key while selecting additional objects. + Individual objects can be added to an existing selection + at any time by holding the Ctrl key while + selecting the desired objects. All objects can also be + selected by using the Edit + Select All + menu item. All objects in an aggregate object selection will be + highlighted.

+
+ +
+ Area selections + +

Multiple objects can also be selected by clicking an empty + area and dragging to form a rectangular area. When released, + all objects contained in the area will form an aggregate + selection. An area selection can be used to add to an existing + selection by holding the Ctrl key while + performing the selection.

+ +
+ +
+ Unselecting objects + +

Individual objects can be removed from an existing + selection by holding the Ctrl key while + clicking on a previously selected object. An entire selection + can be dismissed by using the + Edit Un-select All + menu item + or by simply clicking any empty space in the display area. + Once an object is unselected its highlight is removed.

+ +
+ +
+ Clipboard Commands + +

Object selections can be manipulated using the standard clipboard + operations Cut, + Copy, Paste, + and Delete.

+ +
+ <gui>Cut</gui> (<keyseq><key>Ctrl</key><key>X</key></keyseq>) + +

Moves selected objects to the clipboard. The objects are + then available for pasting back into the current document or + another document.

+ +
+ +
+ <gui>Copy</gui> (<keyseq><key>Ctrl</key><key>C</key></keyseq>) + +

Copies selected objects to the clipboard without deleting + them. The objects are then available for pasting back into + the current document or another document.

+ +
+ +
+ <gui>Paste</gui> (<keyseq><key>Ctrl</key><key>V</key></keyseq>) + +

Pastes objects from the clipboard into the current document. + gLabels can only paste objects from + another gLabels document.

+ +
+ +
+ <gui>Delete</gui> (<key>Del</key>) + +

Deletes selected objects without placing them on the + clipboard.

+ +
+
+ + -- 2.39.5