From 086ff34a3a7e5e595630d658c1c13778399452d1 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Fri, 17 Jul 2009 19:01:06 -0500 Subject: [PATCH] xpedite1k: Remove support for reading MACs from EEPROM By default, the XPedite1000 comes installed with xMon, a proprietary bootloader. xMon stores its MAC address in an onboard EEPROM. Rather than requiring a non-standard location in the EEPROM to be reserved for MAC addresses, store the MAC addresses in U-Boot's standard environment. A U-Boot application or OS application can be used to migrate xMon MAC addresses to U-Boot's environment if necessary. Signed-off-by: Peter Tyser Signed-off-by: Stefan Roese --- board/xpedite1k/xpedite1k.c | 62 +------------------------------------ include/configs/XPEDITE1K.h | 1 - 2 files changed, 1 insertion(+), 62 deletions(-) diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c index 8a4e76c0ff..36a133f6f1 100644 --- a/board/xpedite1k/xpedite1k.c +++ b/board/xpedite1k/xpedite1k.c @@ -235,64 +235,4 @@ ulong post_word_load (void) return *save_addr; } -#endif - -/*----------------------------------------------------------------------------- - * board_get_enetaddr -- Read the MAC Addresses in the I2C EEPROM - *----------------------------------------------------------------------------- - */ -static int read_i2c; -static void board_get_enetaddr(uchar *enet) -{ - int i; - unsigned char buff[0x100], *cp; - - if (read_i2c) - return; - - /* Initialize I2C */ - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - - /* Read 256 bytes in EEPROM */ - i2c_read (0x50, 0, 1, buff, 0x100); - - cp = &buff[0xF4]; - for (i = 0; i < 6; i++,cp++) - enet[i] = *cp; - - printf("MAC address = %pM\n", enet); - read_i2c = 1; -} - -int misc_init_r(void) -{ - uchar enetaddr[6], i2c_enetaddr[6]; - - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { - board_get_enetaddr(i2c_enetaddr); - eth_setenv_enetaddr("ethaddr", i2c_enetaddr); - } - -#ifdef CONFIG_HAS_ETH1 - if (!eth_getenv_enetaddr("eth1addr", enetaddr)) { - board_get_enetaddr(i2c_enetaddr); - eth_setenv_enetaddr("eth1addr", i2c_enetaddr); - } -#endif - -#ifdef CONFIG_HAS_ETH2 - if (!eth_getenv_enetaddr("eth2addr", enetaddr)) { - board_get_enetaddr(i2c_enetaddr); - eth_setenv_enetaddr("eth2addr", i2c_enetaddr); - } -#endif - -#ifdef CONFIG_HAS_ETH3 - if (!eth_getenv_enetaddr("eth3addr", enetaddr)) { - board_get_enetaddr(i2c_enetaddr); - eth_setenv_enetaddr("eth3addr", i2c_enetaddr); - } -#endif - - return 0; -} +#endif \ No newline at end of file diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h index 57878a22fd..93c4b0aeea 100644 --- a/include/configs/XPEDITE1K.h +++ b/include/configs/XPEDITE1K.h @@ -38,7 +38,6 @@ #define CONFIG_440 1 #define CONFIG_440GX 1 /* 440 GX */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_MISC_INIT_R #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ -- 2.39.2