From 09dc6b0bbd1d5e39cdddeebc059f9a75630e4f6f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 1 Jun 2008 01:29:57 -0400 Subject: [PATCH] Blackfin: use on-chip syscontrol() rom function when available Newer Blackfin's have an on-chip rom with a syscontrol() function that needs to be used to properly program the memory and voltage settings as it will include (possibly critical) factory tested bias values. Signed-off-by: Mike Frysinger --- cpu/blackfin/initcode.c | 60 ++++++++++++++++++++++++++--------------- 1 file changed, 38 insertions(+), 22 deletions(-) diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c index 6091f8cef1..7facdc3df9 100644 --- a/cpu/blackfin/initcode.c +++ b/cpu/blackfin/initcode.c @@ -216,7 +216,7 @@ static inline void serial_putc(char c) # define CONFIG_VR_CTL_VAL (CONFIG_VR_CTL_CLKBUF | CONFIG_VR_CTL_VLEV | CONFIG_VR_CTL_FREQ) #endif -__attribute__((saveall)) +BOOTROM_CALLED_FUNC_ATTR void initcode(ADI_BOOT_DATA *bootstruct) { uint32_t old_baud = serial_init(); @@ -267,34 +267,50 @@ void initcode(ADI_BOOT_DATA *bootstruct) bfin_write_SIC_IWR(1); #endif - serial_putc('L'); + /* With newer bootroms, we use the helper function to set up + * the memory controller. Older bootroms lacks such helpers + * so we do it ourselves. + */ + if (BOOTROM_CAPS_SYSCONTROL) { + serial_putc('S'); - bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL); + ADI_SYSCTRL_VALUES memory_settings; + memory_settings.uwVrCtl = CONFIG_VR_CTL_VAL; + memory_settings.uwPllCtl = CONFIG_PLL_CTL_VAL; + memory_settings.uwPllDiv = CONFIG_PLL_DIV_VAL; + memory_settings.uwPllLockCnt = CONFIG_PLL_LOCKCNT_VAL; + syscontrol(SYSCTRL_WRITE | SYSCTRL_VRCTL | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT | + (CONFIG_VR_CTL_VAL & FREQ_MASK ? SYSCTRL_INTVOLTAGE : SYSCTRL_EXTVOLTAGE), &memory_settings, NULL); + } else { + serial_putc('L'); - serial_putc('A'); + bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL); - /* Only reprogram when needed to avoid triggering unnecessary - * PLL relock sequences. - */ - if (bfin_read_VR_CTL() != CONFIG_VR_CTL_VAL) { - serial_putc('!'); - bfin_write_VR_CTL(CONFIG_VR_CTL_VAL); - asm("idle;"); - } + serial_putc('A'); - serial_putc('C'); + /* Only reprogram when needed to avoid triggering unnecessary + * PLL relock sequences. + */ + if (bfin_read_VR_CTL() != CONFIG_VR_CTL_VAL) { + serial_putc('!'); + bfin_write_VR_CTL(CONFIG_VR_CTL_VAL); + asm("idle;"); + } - bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL); + serial_putc('C'); - serial_putc('K'); + bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL); - /* Only reprogram when needed to avoid triggering unnecessary - * PLL relock sequences. - */ - if (bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) { - serial_putc('!'); - bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL); - asm("idle;"); + serial_putc('K'); + + /* Only reprogram when needed to avoid triggering unnecessary + * PLL relock sequences. + */ + if (bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) { + serial_putc('!'); + bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL); + asm("idle;"); + } } /* Since we've changed the SCLK above, we may need to update -- 2.39.5