From 0b2d3f209a33648a9d235af3927c113a7cfa4c29 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 28 Jan 2014 00:19:47 +0100 Subject: [PATCH] ARM: NET: Remove the IXP NPE ethernet driver This driver is no longer used, remove it. Signed-off-by: Marek Vasut Cc: Albert Aribaud Cc: Michael Schwingen Cc: Tom Rini --- Makefile | 1 - drivers/net/npe/IxEthAcc.c | 237 -- drivers/net/npe/IxEthAccCommon.c | 1025 ------- drivers/net/npe/IxEthAccControlInterface.c | 509 ---- drivers/net/npe/IxEthAccDataPlane.c | 2459 ---------------- drivers/net/npe/IxEthAccMac.c | 2617 ----------------- drivers/net/npe/IxEthAccMii.c | 386 --- drivers/net/npe/IxEthDBAPI.c | 424 --- drivers/net/npe/IxEthDBAPISupport.c | 651 ---- drivers/net/npe/IxEthDBCore.c | 439 --- drivers/net/npe/IxEthDBEvents.c | 496 ---- drivers/net/npe/IxEthDBFeatures.c | 638 ---- drivers/net/npe/IxEthDBFirewall.c | 242 -- drivers/net/npe/IxEthDBHashtable.c | 618 ---- drivers/net/npe/IxEthDBLearning.c | 125 - drivers/net/npe/IxEthDBMem.c | 625 ---- drivers/net/npe/IxEthDBNPEAdaptor.c | 695 ----- drivers/net/npe/IxEthDBPortUpdate.c | 716 ----- drivers/net/npe/IxEthDBReports.c | 628 ---- drivers/net/npe/IxEthDBSearch.c | 303 -- drivers/net/npe/IxEthDBSpanningTree.c | 83 - drivers/net/npe/IxEthDBUtil.c | 96 - drivers/net/npe/IxEthDBVlan.c | 1155 -------- drivers/net/npe/IxEthDBWiFi.c | 456 --- drivers/net/npe/IxEthMii.c | 473 --- drivers/net/npe/IxFeatureCtrl.c | 398 --- drivers/net/npe/IxNpeDl.c | 916 ------ drivers/net/npe/IxNpeDlImageMgr.c | 663 ----- drivers/net/npe/IxNpeDlNpeMgr.c | 907 ------ drivers/net/npe/IxNpeDlNpeMgrUtils.c | 782 ----- drivers/net/npe/IxNpeMh.c | 558 ---- drivers/net/npe/IxNpeMhConfig.c | 584 ---- drivers/net/npe/IxNpeMhReceive.c | 296 -- drivers/net/npe/IxNpeMhSend.c | 283 -- drivers/net/npe/IxNpeMhSolicitedCbMgr.c | 334 --- drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c | 222 -- drivers/net/npe/IxOsalBufferMgt.c | 776 ----- drivers/net/npe/IxOsalIoMem.c | 307 -- drivers/net/npe/IxOsalOsCacheMMU.c | 43 - drivers/net/npe/IxOsalOsMsgQ.c | 55 - drivers/net/npe/IxOsalOsSemaphore.c | 209 -- drivers/net/npe/IxOsalOsServices.c | 227 -- drivers/net/npe/IxOsalOsThread.c | 74 - drivers/net/npe/IxQMgrAqmIf.c | 939 ------ drivers/net/npe/IxQMgrDispatcher.c | 1320 --------- drivers/net/npe/IxQMgrInit.c | 209 -- drivers/net/npe/IxQMgrQAccess.c | 772 ----- drivers/net/npe/IxQMgrQCfg.c | 519 ---- drivers/net/npe/Makefile | 60 - drivers/net/npe/include/IxAssert.h | 47 - drivers/net/npe/include/IxAtmSch.h | 480 --- drivers/net/npe/include/IxAtmTypes.h | 385 --- drivers/net/npe/include/IxAtmdAcc.h | 1169 -------- drivers/net/npe/include/IxAtmdAccCtrl.h | 1933 ------------ drivers/net/npe/include/IxAtmm.h | 771 ----- drivers/net/npe/include/IxDmaAcc.h | 236 -- drivers/net/npe/include/IxEthAcc.h | 2488 ---------------- drivers/net/npe/include/IxEthAccDataPlane_p.h | 221 -- drivers/net/npe/include/IxEthAccMac_p.h | 224 -- drivers/net/npe/include/IxEthAccMii_p.h | 73 - .../net/npe/include/IxEthAccQueueAssign_p.h | 113 - drivers/net/npe/include/IxEthAcc_p.h | 301 -- drivers/net/npe/include/IxEthDB.h | 2349 --------------- drivers/net/npe/include/IxEthDBLocks_p.h | 98 - drivers/net/npe/include/IxEthDBLog_p.h | 203 -- drivers/net/npe/include/IxEthDBMessages_p.h | 234 -- drivers/net/npe/include/IxEthDBPortDefs.h | 139 - drivers/net/npe/include/IxEthDBQoS.h | 130 - drivers/net/npe/include/IxEthDB_p.h | 686 ----- drivers/net/npe/include/IxEthMii.h | 246 -- drivers/net/npe/include/IxEthMii_p.h | 161 - drivers/net/npe/include/IxEthNpe.h | 671 ----- drivers/net/npe/include/IxFeatureCtrl.h | 718 ----- drivers/net/npe/include/IxHssAcc.h | 1292 -------- drivers/net/npe/include/IxI2cDrv.h | 843 ------ drivers/net/npe/include/IxNpeA.h | 758 ----- drivers/net/npe/include/IxNpeDl.h | 956 ------ drivers/net/npe/include/IxNpeDlImageMgr_p.h | 339 --- drivers/net/npe/include/IxNpeDlMacros_p.h | 390 --- .../npe/include/IxNpeDlNpeMgrEcRegisters_p.h | 869 ------ .../net/npe/include/IxNpeDlNpeMgrUtils_p.h | 381 --- drivers/net/npe/include/IxNpeDlNpeMgr_p.h | 236 -- drivers/net/npe/include/IxNpeMh.h | 473 --- drivers/net/npe/include/IxNpeMhConfig_p.h | 531 ---- drivers/net/npe/include/IxNpeMhMacros_p.h | 272 -- drivers/net/npe/include/IxNpeMhReceive_p.h | 115 - drivers/net/npe/include/IxNpeMhSend_p.h | 139 - .../net/npe/include/IxNpeMhSolicitedCbMgr_p.h | 147 - .../npe/include/IxNpeMhUnsolicitedCbMgr_p.h | 145 - drivers/net/npe/include/IxNpeMicrocode.h | 272 -- drivers/net/npe/include/IxOsBufLib.h | 31 - drivers/net/npe/include/IxOsBuffMgt.h | 28 - drivers/net/npe/include/IxOsBuffPoolMgt.h | 50 - drivers/net/npe/include/IxOsCacheMMU.h | 36 - drivers/net/npe/include/IxOsPrintf.h | 78 - drivers/net/npe/include/IxOsServices.h | 31 - .../net/npe/include/IxOsServicesComponents.h | 110 - .../net/npe/include/IxOsServicesEndianess.h | 28 - .../net/npe/include/IxOsServicesMemAccess.h | 28 - drivers/net/npe/include/IxOsServicesMemMap.h | 30 - drivers/net/npe/include/IxOsal.h | 1493 ---------- drivers/net/npe/include/IxOsalAssert.h | 57 - drivers/net/npe/include/IxOsalBackward.h | 41 - .../net/npe/include/IxOsalBackwardAssert.h | 30 - .../net/npe/include/IxOsalBackwardBufferMgt.h | 135 - .../net/npe/include/IxOsalBackwardCacheMMU.h | 45 - .../net/npe/include/IxOsalBackwardMemMap.h | 117 - .../npe/include/IxOsalBackwardOsServices.h | 101 - drivers/net/npe/include/IxOsalBackwardOssl.h | 248 -- drivers/net/npe/include/IxOsalBufferMgt.h | 570 ---- .../net/npe/include/IxOsalBufferMgtDefault.h | 64 - drivers/net/npe/include/IxOsalConfig.h | 52 - drivers/net/npe/include/IxOsalEndianess.h | 110 - drivers/net/npe/include/IxOsalIoMem.h | 298 -- drivers/net/npe/include/IxOsalMemAccess.h | 470 --- drivers/net/npe/include/IxOsalOem.h | 73 - drivers/net/npe/include/IxOsalOs.h | 30 - drivers/net/npe/include/IxOsalOsAssert.h | 10 - drivers/net/npe/include/IxOsalOsBufferMgt.h | 72 - drivers/net/npe/include/IxOsalOsIxp400.h | 292 -- .../include/IxOsalOsIxp400CustomizedMapping.h | 380 --- drivers/net/npe/include/IxOsalOsTypes.h | 60 - .../net/npe/include/IxOsalOsUtilitySymbols.h | 4 - drivers/net/npe/include/IxOsalTypes.h | 355 --- .../net/npe/include/IxOsalUtilitySymbols.h | 27 - drivers/net/npe/include/IxParityENAcc.h | 761 ----- drivers/net/npe/include/IxPerfProfAcc.h | 1334 --------- drivers/net/npe/include/IxQMgr.h | 2186 -------------- drivers/net/npe/include/IxQMgrAqmIf_p.h | 903 ------ drivers/net/npe/include/IxQMgrDefines_p.h | 31 - drivers/net/npe/include/IxQMgrDispatcher_p.h | 82 - drivers/net/npe/include/IxQMgrLog_p.h | 100 - drivers/net/npe/include/IxQMgrQAccess_p.h | 72 - drivers/net/npe/include/IxQMgrQCfg_p.h | 98 - drivers/net/npe/include/IxQueueAssignments.h | 492 ---- drivers/net/npe/include/IxSspAcc.h | 1247 -------- drivers/net/npe/include/IxTimeSyncAcc.h | 759 ----- drivers/net/npe/include/IxTimerCtrl.h | 239 -- drivers/net/npe/include/IxTypes.h | 62 - drivers/net/npe/include/IxUART.h | 434 --- drivers/net/npe/include/IxVersionId.h | 131 - drivers/net/npe/include/ix_error.h | 42 - drivers/net/npe/include/ix_macros.h | 242 -- drivers/net/npe/include/ix_os_type.h | 41 - drivers/net/npe/include/ix_ossl.h | 136 - drivers/net/npe/include/ix_symbols.h | 82 - drivers/net/npe/include/ix_types.h | 184 -- drivers/net/npe/include/npe.h | 74 - drivers/net/npe/include/os_datatypes.h | 58 - drivers/net/npe/miiphy.c | 101 - drivers/net/npe/npe.c | 680 ----- 151 files changed, 65939 deletions(-) delete mode 100644 drivers/net/npe/IxEthAcc.c delete mode 100644 drivers/net/npe/IxEthAccCommon.c delete mode 100644 drivers/net/npe/IxEthAccControlInterface.c delete mode 100644 drivers/net/npe/IxEthAccDataPlane.c delete mode 100644 drivers/net/npe/IxEthAccMac.c delete mode 100644 drivers/net/npe/IxEthAccMii.c delete mode 100644 drivers/net/npe/IxEthDBAPI.c delete mode 100644 drivers/net/npe/IxEthDBAPISupport.c delete mode 100644 drivers/net/npe/IxEthDBCore.c delete mode 100644 drivers/net/npe/IxEthDBEvents.c delete mode 100644 drivers/net/npe/IxEthDBFeatures.c delete mode 100644 drivers/net/npe/IxEthDBFirewall.c delete mode 100644 drivers/net/npe/IxEthDBHashtable.c delete mode 100644 drivers/net/npe/IxEthDBLearning.c delete mode 100644 drivers/net/npe/IxEthDBMem.c delete mode 100644 drivers/net/npe/IxEthDBNPEAdaptor.c delete mode 100644 drivers/net/npe/IxEthDBPortUpdate.c delete mode 100644 drivers/net/npe/IxEthDBReports.c delete mode 100644 drivers/net/npe/IxEthDBSearch.c delete mode 100644 drivers/net/npe/IxEthDBSpanningTree.c delete mode 100644 drivers/net/npe/IxEthDBUtil.c delete mode 100644 drivers/net/npe/IxEthDBVlan.c delete mode 100644 drivers/net/npe/IxEthDBWiFi.c delete mode 100644 drivers/net/npe/IxEthMii.c delete mode 100644 drivers/net/npe/IxFeatureCtrl.c delete mode 100644 drivers/net/npe/IxNpeDl.c delete mode 100644 drivers/net/npe/IxNpeDlImageMgr.c delete mode 100644 drivers/net/npe/IxNpeDlNpeMgr.c delete mode 100644 drivers/net/npe/IxNpeDlNpeMgrUtils.c delete mode 100644 drivers/net/npe/IxNpeMh.c delete mode 100644 drivers/net/npe/IxNpeMhConfig.c delete mode 100644 drivers/net/npe/IxNpeMhReceive.c delete mode 100644 drivers/net/npe/IxNpeMhSend.c delete mode 100644 drivers/net/npe/IxNpeMhSolicitedCbMgr.c delete mode 100644 drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c delete mode 100644 drivers/net/npe/IxOsalBufferMgt.c delete mode 100644 drivers/net/npe/IxOsalIoMem.c delete mode 100644 drivers/net/npe/IxOsalOsCacheMMU.c delete mode 100644 drivers/net/npe/IxOsalOsMsgQ.c delete mode 100644 drivers/net/npe/IxOsalOsSemaphore.c delete mode 100644 drivers/net/npe/IxOsalOsServices.c delete mode 100644 drivers/net/npe/IxOsalOsThread.c delete mode 100644 drivers/net/npe/IxQMgrAqmIf.c delete mode 100644 drivers/net/npe/IxQMgrDispatcher.c delete mode 100644 drivers/net/npe/IxQMgrInit.c delete mode 100644 drivers/net/npe/IxQMgrQAccess.c delete mode 100644 drivers/net/npe/IxQMgrQCfg.c delete mode 100644 drivers/net/npe/Makefile delete mode 100644 drivers/net/npe/include/IxAssert.h delete mode 100644 drivers/net/npe/include/IxAtmSch.h delete mode 100644 drivers/net/npe/include/IxAtmTypes.h delete mode 100644 drivers/net/npe/include/IxAtmdAcc.h delete mode 100644 drivers/net/npe/include/IxAtmdAccCtrl.h delete mode 100644 drivers/net/npe/include/IxAtmm.h delete mode 100644 drivers/net/npe/include/IxDmaAcc.h delete mode 100644 drivers/net/npe/include/IxEthAcc.h delete mode 100644 drivers/net/npe/include/IxEthAccDataPlane_p.h delete mode 100644 drivers/net/npe/include/IxEthAccMac_p.h delete mode 100644 drivers/net/npe/include/IxEthAccMii_p.h delete mode 100644 drivers/net/npe/include/IxEthAccQueueAssign_p.h delete mode 100644 drivers/net/npe/include/IxEthAcc_p.h delete mode 100644 drivers/net/npe/include/IxEthDB.h delete mode 100644 drivers/net/npe/include/IxEthDBLocks_p.h delete mode 100644 drivers/net/npe/include/IxEthDBLog_p.h delete mode 100644 drivers/net/npe/include/IxEthDBMessages_p.h delete mode 100644 drivers/net/npe/include/IxEthDBPortDefs.h delete mode 100644 drivers/net/npe/include/IxEthDBQoS.h delete mode 100644 drivers/net/npe/include/IxEthDB_p.h delete mode 100644 drivers/net/npe/include/IxEthMii.h delete mode 100644 drivers/net/npe/include/IxEthMii_p.h delete mode 100644 drivers/net/npe/include/IxEthNpe.h delete mode 100644 drivers/net/npe/include/IxFeatureCtrl.h delete mode 100644 drivers/net/npe/include/IxHssAcc.h delete mode 100644 drivers/net/npe/include/IxI2cDrv.h delete mode 100644 drivers/net/npe/include/IxNpeA.h delete mode 100644 drivers/net/npe/include/IxNpeDl.h delete mode 100644 drivers/net/npe/include/IxNpeDlImageMgr_p.h delete mode 100644 drivers/net/npe/include/IxNpeDlMacros_p.h delete mode 100644 drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h delete mode 100644 drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h delete mode 100644 drivers/net/npe/include/IxNpeDlNpeMgr_p.h delete mode 100644 drivers/net/npe/include/IxNpeMh.h delete mode 100644 drivers/net/npe/include/IxNpeMhConfig_p.h delete mode 100644 drivers/net/npe/include/IxNpeMhMacros_p.h delete mode 100644 drivers/net/npe/include/IxNpeMhReceive_p.h delete mode 100644 drivers/net/npe/include/IxNpeMhSend_p.h delete mode 100644 drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h delete mode 100644 drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h delete mode 100644 drivers/net/npe/include/IxNpeMicrocode.h delete mode 100644 drivers/net/npe/include/IxOsBufLib.h delete mode 100644 drivers/net/npe/include/IxOsBuffMgt.h delete mode 100644 drivers/net/npe/include/IxOsBuffPoolMgt.h delete mode 100644 drivers/net/npe/include/IxOsCacheMMU.h delete mode 100644 drivers/net/npe/include/IxOsPrintf.h delete mode 100644 drivers/net/npe/include/IxOsServices.h delete mode 100644 drivers/net/npe/include/IxOsServicesComponents.h delete mode 100644 drivers/net/npe/include/IxOsServicesEndianess.h delete mode 100644 drivers/net/npe/include/IxOsServicesMemAccess.h delete mode 100644 drivers/net/npe/include/IxOsServicesMemMap.h delete mode 100644 drivers/net/npe/include/IxOsal.h delete mode 100644 drivers/net/npe/include/IxOsalAssert.h delete mode 100644 drivers/net/npe/include/IxOsalBackward.h delete mode 100644 drivers/net/npe/include/IxOsalBackwardAssert.h delete mode 100644 drivers/net/npe/include/IxOsalBackwardBufferMgt.h delete mode 100644 drivers/net/npe/include/IxOsalBackwardCacheMMU.h delete mode 100644 drivers/net/npe/include/IxOsalBackwardMemMap.h delete mode 100644 drivers/net/npe/include/IxOsalBackwardOsServices.h delete mode 100644 drivers/net/npe/include/IxOsalBackwardOssl.h delete mode 100644 drivers/net/npe/include/IxOsalBufferMgt.h delete mode 100644 drivers/net/npe/include/IxOsalBufferMgtDefault.h delete mode 100644 drivers/net/npe/include/IxOsalConfig.h delete mode 100644 drivers/net/npe/include/IxOsalEndianess.h delete mode 100644 drivers/net/npe/include/IxOsalIoMem.h delete mode 100644 drivers/net/npe/include/IxOsalMemAccess.h delete mode 100644 drivers/net/npe/include/IxOsalOem.h delete mode 100644 drivers/net/npe/include/IxOsalOs.h delete mode 100644 drivers/net/npe/include/IxOsalOsAssert.h delete mode 100644 drivers/net/npe/include/IxOsalOsBufferMgt.h delete mode 100644 drivers/net/npe/include/IxOsalOsIxp400.h delete mode 100644 drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h delete mode 100644 drivers/net/npe/include/IxOsalOsTypes.h delete mode 100644 drivers/net/npe/include/IxOsalOsUtilitySymbols.h delete mode 100644 drivers/net/npe/include/IxOsalTypes.h delete mode 100644 drivers/net/npe/include/IxOsalUtilitySymbols.h delete mode 100644 drivers/net/npe/include/IxParityENAcc.h delete mode 100644 drivers/net/npe/include/IxPerfProfAcc.h delete mode 100644 drivers/net/npe/include/IxQMgr.h delete mode 100644 drivers/net/npe/include/IxQMgrAqmIf_p.h delete mode 100644 drivers/net/npe/include/IxQMgrDefines_p.h delete mode 100644 drivers/net/npe/include/IxQMgrDispatcher_p.h delete mode 100644 drivers/net/npe/include/IxQMgrLog_p.h delete mode 100644 drivers/net/npe/include/IxQMgrQAccess_p.h delete mode 100644 drivers/net/npe/include/IxQMgrQCfg_p.h delete mode 100644 drivers/net/npe/include/IxQueueAssignments.h delete mode 100644 drivers/net/npe/include/IxSspAcc.h delete mode 100644 drivers/net/npe/include/IxTimeSyncAcc.h delete mode 100644 drivers/net/npe/include/IxTimerCtrl.h delete mode 100644 drivers/net/npe/include/IxTypes.h delete mode 100644 drivers/net/npe/include/IxUART.h delete mode 100644 drivers/net/npe/include/IxVersionId.h delete mode 100644 drivers/net/npe/include/ix_error.h delete mode 100644 drivers/net/npe/include/ix_macros.h delete mode 100644 drivers/net/npe/include/ix_os_type.h delete mode 100644 drivers/net/npe/include/ix_ossl.h delete mode 100644 drivers/net/npe/include/ix_symbols.h delete mode 100644 drivers/net/npe/include/ix_types.h delete mode 100644 drivers/net/npe/include/npe.h delete mode 100644 drivers/net/npe/include/os_datatypes.h delete mode 100644 drivers/net/npe/miiphy.c delete mode 100644 drivers/net/npe/npe.c diff --git a/Makefile b/Makefile index 1687e2e90a..0e07aa5970 100644 --- a/Makefile +++ b/Makefile @@ -227,7 +227,6 @@ LIBS-y += $(CPUDIR)/ ifdef SOC LIBS-y += $(CPUDIR)/$(SOC)/ endif -LIBS-$(CONFIG_IXP4XX_NPE) += drivers/net/npe/ LIBS-$(CONFIG_OF_EMBED) += dts/ LIBS-y += arch/$(ARCH)/lib/ LIBS-y += fs/ diff --git a/drivers/net/npe/IxEthAcc.c b/drivers/net/npe/IxEthAcc.c deleted file mode 100644 index 05a9e053ff..0000000000 --- a/drivers/net/npe/IxEthAcc.c +++ /dev/null @@ -1,237 +0,0 @@ -/** - * @file IxEthAcc.c - * - * @author Intel Corporation - * @date 20-Feb-2001 - * - * @brief This file contains the implementation of the IXP425 Ethernet Access Component - * - * Design Notes: - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - - - -#include "IxEthAcc.h" -#ifdef CONFIG_IXP425_COMPONENT_ETHDB -#include "IxEthDB.h" -#endif -#include "IxFeatureCtrl.h" - -#include "IxEthAcc_p.h" -#include "IxEthAccMac_p.h" -#include "IxEthAccMii_p.h" - -/** - * @addtogroup IxEthAcc - *@{ - */ - - -/** - * @brief System-wide information data strucure. - * - * @ingroup IxEthAccPri - * - */ - -IxEthAccInfo ixEthAccDataInfo; -extern PUBLIC IxEthAccMacState ixEthAccMacState[]; -extern PUBLIC IxOsalMutex ixEthAccControlInterfaceMutex; - -/** - * @brief System-wide information - * - * @ingroup IxEthAccPri - * - */ -BOOL ixEthAccServiceInit = false; - -/* global filtering bit mask */ -PUBLIC UINT32 ixEthAccNewSrcMask; - -/** - * @brief Per port information data strucure. - * - * @ingroup IxEthAccPri - * - */ - -IxEthAccPortDataInfo ixEthAccPortData[IX_ETH_ACC_NUMBER_OF_PORTS]; - -PUBLIC IxEthAccStatus ixEthAccInit() -{ -#ifdef CONFIG_IXP425_COMPONENT_ETHDB - /* - * Initialize Control plane - */ - if (ixEthDBInit() != IX_ETH_DB_SUCCESS) - { - IX_ETH_ACC_WARNING_LOG("ixEthAccInit: EthDB init failed\n", 0, 0, 0, 0, 0, 0); - - return IX_ETH_ACC_FAIL; - } -#endif - - if (IX_FEATURE_CTRL_SWCONFIG_ENABLED == ixFeatureCtrlSwConfigurationCheck (IX_FEATURECTRL_ETH_LEARNING)) - { - ixEthAccNewSrcMask = (~0); /* want all the bits */ - } - else - { - ixEthAccNewSrcMask = (~IX_ETHACC_NE_NEWSRCMASK); /* want all but the NewSrc bit */ - } - - /* - * Initialize Data plane - */ - if ( ixEthAccInitDataPlane() != IX_ETH_ACC_SUCCESS ) - { - IX_ETH_ACC_WARNING_LOG("ixEthAccInit: data plane init failed\n", 0, 0, 0, 0, 0, 0); - - return IX_ETH_ACC_FAIL; - } - - - if ( ixEthAccQMgrQueuesConfig() != IX_ETH_ACC_SUCCESS ) - { - IX_ETH_ACC_WARNING_LOG("ixEthAccInit: queue config failed\n", 0, 0, 0, 0, 0, 0); - - return IX_ETH_ACC_FAIL; - } - - /* - * Initialize MII - */ - if ( ixEthAccMiiInit() != IX_ETH_ACC_SUCCESS ) - { - IX_ETH_ACC_WARNING_LOG("ixEthAccInit: Mii init failed\n", 0, 0, 0, 0, 0, 0); - - return IX_ETH_ACC_FAIL; - } - - /* - * Initialize MAC I/O memory - */ - if (ixEthAccMacMemInit() != IX_ETH_ACC_SUCCESS) - { - IX_ETH_ACC_WARNING_LOG("ixEthAccInit: Mac init failed\n", 0, 0, 0, 0, 0, 0); - - return IX_ETH_ACC_FAIL; - } - - /* - * Initialize control plane interface lock - */ - if (ixOsalMutexInit(&ixEthAccControlInterfaceMutex) != IX_SUCCESS) - { - IX_ETH_ACC_WARNING_LOG("ixEthAccInit: Control plane interface lock initialization failed\n", 0, 0, 0, 0, 0, 0); - - return IX_ETH_ACC_FAIL; - } - - /* initialiasation is complete */ - ixEthAccServiceInit = true; - - return IX_ETH_ACC_SUCCESS; - -} - -PUBLIC void ixEthAccUnload(void) -{ - IxEthAccPortId portId; - - if ( IX_ETH_ACC_IS_SERVICE_INITIALIZED() ) - { - /* check none of the port is still active */ - for (portId = 0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) - { - if ( IX_ETH_IS_PORT_INITIALIZED(portId) ) - { - if (ixEthAccMacState[portId].portDisableState == ACTIVE) - { - IX_ETH_ACC_WARNING_LOG("ixEthAccUnload: port %u still active, bail out\n", portId, 0, 0, 0, 0, 0); - return; - } - } - } - - /* unmap the memory areas */ - ixEthAccMiiUnload(); - ixEthAccMacUnload(); - - /* set all ports as uninitialized */ - for (portId = 0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) - { - ixEthAccPortData[portId].portInitialized = false; - } - - /* uninitialize the service */ - ixEthAccServiceInit = false; - } -} - -PUBLIC IxEthAccStatus ixEthAccPortInit( IxEthAccPortId portId) -{ - - IxEthAccStatus ret=IX_ETH_ACC_SUCCESS; - - if ( ! IX_ETH_ACC_IS_SERVICE_INITIALIZED() ) - { - return(IX_ETH_ACC_FAIL); - } - - /* - * Check for valid port - */ - - if ( ! IX_ETH_ACC_IS_PORT_VALID(portId) ) - { - return (IX_ETH_ACC_INVALID_PORT); - } - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot initialize Eth port.\n",(INT32) portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if ( IX_ETH_IS_PORT_INITIALIZED(portId) ) - { - /* Already initialized */ - return(IX_ETH_ACC_FAIL); - } - - if(ixEthAccMacInit(portId)!=IX_ETH_ACC_SUCCESS) - { - return IX_ETH_ACC_FAIL; - } - - /* - * Set the port init flag. - */ - - ixEthAccPortData[portId].portInitialized = true; - -#ifdef CONFIG_IXP425_COMPONENT_ETHDB - /* init learning/filtering database structures for this port */ - ixEthDBPortInit(portId); -#endif - - return(ret); -} - - diff --git a/drivers/net/npe/IxEthAccCommon.c b/drivers/net/npe/IxEthAccCommon.c deleted file mode 100644 index 8249737b0c..0000000000 --- a/drivers/net/npe/IxEthAccCommon.c +++ /dev/null @@ -1,1025 +0,0 @@ -/** - * @file IxEthAccCommon.c - * - * @author Intel Corporation - * @date 12-Feb-2002 - * - * @brief This file contains the implementation common support routines for the component - * - * Design Notes: - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/* - * Component header files - */ - -#include "IxOsal.h" -#include "IxEthAcc.h" -#include "IxEthDB.h" -#include "IxNpeMh.h" -#include "IxEthDBPortDefs.h" -#include "IxFeatureCtrl.h" -#include "IxEthAcc_p.h" -#include "IxEthAccQueueAssign_p.h" - -#include "IxEthAccDataPlane_p.h" -#include "IxEthAccMii_p.h" - -/** - * @addtogroup IxEthAccPri - *@{ - */ - -extern IxEthAccInfo ixEthAccDataInfo; - -/** - * - * @brief Maximum number of RX queues set to be the maximum number - * of traffic calsses. - * - */ -#define IX_ETHACC_MAX_RX_QUEUES \ - (IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY \ - - IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY \ - + 1) - -/** - * - * @brief Maximum number of 128 entry RX queues - * - */ -#define IX_ETHACC_MAX_LARGE_RX_QUEUES 4 - -/** - * - * @brief Data structure template for Default RX Queues - * - */ -IX_ETH_ACC_PRIVATE -IxEthAccQregInfo ixEthAccQmgrRxDefaultTemplate = - { - IX_ETH_ACC_RX_FRAME_ETH_Q, /**< Queue ID */ - "Eth Rx Q", - ixEthRxFrameQMCallback, /**< Functional callback */ - (IxQMgrCallbackId) 0, /**< Callback tag */ - IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ - IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - true, /**< Enable Q notification at startup */ - IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE,/**< Q Condition to drive callback */ - IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ - IX_QMGR_Q_WM_LEVEL1, /**< Q High water mark - needed by NPE */ - }; - -/** - * - * @brief Data structure template for Small RX Queues - * - */ -IX_ETH_ACC_PRIVATE -IxEthAccQregInfo ixEthAccQmgrRxSmallTemplate = - { - IX_ETH_ACC_RX_FRAME_ETH_Q, /**< Queue ID */ - "Eth Rx Q", - ixEthRxFrameQMCallback, /**< Functional callback */ - (IxQMgrCallbackId) 0, /**< Callback tag */ - IX_QMGR_Q_SIZE64, /**< Allocate Smaller Q */ - IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - true, /**< Enable Q notification at startup */ - IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE,/**< Q Condition to drive callback */ - IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ - IX_QMGR_Q_WM_LEVEL1, /**< Q High water mark - needed by NPE */ - }; - - -/** - * - * @brief Data structure used to register & initialize the Queues - * - */ -IX_ETH_ACC_PRIVATE -IxEthAccQregInfo ixEthAccQmgrStaticInfo[]= -{ - { - IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q, - "Eth Rx Fr Q 1", - ixEthRxFreeQMCallback, - (IxQMgrCallbackId) IX_ETH_PORT_1, - IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ - IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - false, /**< Disable Q notification at startup */ - IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q_SOURCE, /**< Q Condition to drive callback */ - IX_QMGR_Q_WM_LEVEL0, /***< Q Low water mark */ - IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ - }, - - { - IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q, - "Eth Rx Fr Q 2", - ixEthRxFreeQMCallback, - (IxQMgrCallbackId) IX_ETH_PORT_2, - IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ - IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - false, /**< Disable Q notification at startup */ - IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q_SOURCE, /**< Q Condition to drive callback */ - IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ - IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ - }, -#ifdef __ixp46X - { - IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q, - "Eth Rx Fr Q 3", - ixEthRxFreeQMCallback, - (IxQMgrCallbackId) IX_ETH_PORT_3, - IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ - IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - false, /**< Disable Q notification at startup */ - IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q_SOURCE, /**< Q Condition to drive callback */ - IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ - IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ - }, -#endif - { - IX_ETH_ACC_TX_FRAME_ENET0_Q, - "Eth Tx Q 1", - ixEthTxFrameQMCallback, - (IxQMgrCallbackId) IX_ETH_PORT_1, - IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ - IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - false, /**< Disable Q notification at startup */ - IX_ETH_ACC_TX_FRAME_ENET0_Q_SOURCE, /**< Q Condition to drive callback */ - IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ - IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ - }, - - { - IX_ETH_ACC_TX_FRAME_ENET1_Q, - "Eth Tx Q 2", - ixEthTxFrameQMCallback, - (IxQMgrCallbackId) IX_ETH_PORT_2, - IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ - IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - false, /**< Disable Q notification at startup */ - IX_ETH_ACC_TX_FRAME_ENET1_Q_SOURCE, /**< Q Condition to drive callback */ - IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ - IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ - }, -#ifdef __ixp46X - { - IX_ETH_ACC_TX_FRAME_ENET2_Q, - "Eth Tx Q 3", - ixEthTxFrameQMCallback, - (IxQMgrCallbackId) IX_ETH_PORT_3, - IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ - IX_QMGR_Q_ENTRY_SIZE1, /** Queue Entry Sizes - all Q entries are single ord entries */ - false, /** Disable Q notification at startup */ - IX_ETH_ACC_TX_FRAME_ENET2_Q_SOURCE, /** Q Condition to drive callback */ - IX_QMGR_Q_WM_LEVEL0, /* No queues use almost empty */ - IX_QMGR_Q_WM_LEVEL64, /** Q High water mark - needed used */ - }, -#endif - { - IX_ETH_ACC_TX_FRAME_DONE_ETH_Q, - "Eth Tx Done Q", - ixEthTxFrameDoneQMCallback, - (IxQMgrCallbackId) 0, - IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ - IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - true, /**< Enable Q notification at startup */ - IX_ETH_ACC_TX_FRAME_DONE_ETH_Q_SOURCE, /**< Q Condition to drive callback */ - IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ - IX_QMGR_Q_WM_LEVEL2, /**< Q High water mark - needed by NPE */ - }, - - { /* Null Termination entry - */ - (IxQMgrQId)0, - (char *) NULL, - (IxQMgrCallback) NULL, - (IxQMgrCallbackId) 0, - 0, - 0, - 0, - 0, - 0, - 0 - } - -}; - -/** - * - * @brief Data structure used to register & initialize the Queues - * - * The structure will be filled at run time depending on the NPE - * image already loaded and the QoS configured in ethDB. - * - */ -IX_ETH_ACC_PRIVATE -IxEthAccQregInfo ixEthAccQmgrRxQueuesInfo[IX_ETHACC_MAX_RX_QUEUES+1]= -{ - { /* PlaceHolder for rx queues - * depending on the QoS configured - */ - (IxQMgrQId)0, - (char *) NULL, - (IxQMgrCallback) NULL, - (IxQMgrCallbackId) 0, - 0, - 0, - 0, - 0, - 0, - 0 - }, - - { /* PlaceHolder for rx queues - * depending on the QoS configured - */ - (IxQMgrQId)0, - (char *) NULL, - (IxQMgrCallback) NULL, - (IxQMgrCallbackId) 0, - 0, - 0, - 0, - 0, - 0, - 0 - }, - - { /* PlaceHolder for rx queues - * depending on the QoS configured - */ - (IxQMgrQId)0, - (char *) NULL, - (IxQMgrCallback) NULL, - (IxQMgrCallbackId) 0, - 0, - 0, - 0, - 0, - 0, - 0 - }, - - { /* PlaceHolder for rx queues - * depending on the QoS configured - */ - (IxQMgrQId)0, - (char *) NULL, - (IxQMgrCallback) NULL, - (IxQMgrCallbackId) 0, - 0, - 0, - 0, - 0, - 0, - 0 - }, - - { /* PlaceHolder for rx queues - * depending on the QoS configured - */ - (IxQMgrQId)0, - (char *) NULL, - (IxQMgrCallback) NULL, - (IxQMgrCallbackId) 0, - 0, - 0, - 0, - 0, - 0, - 0 - }, - - { /* PlaceHolder for rx queues - * depending on the QoS configured - */ - (IxQMgrQId)0, - (char *) NULL, - (IxQMgrCallback) NULL, - (IxQMgrCallbackId) 0, - 0, - 0, - 0, - 0, - 0, - 0 - }, - - { /* PlaceHolder for rx queues - * depending on the QoS configured - */ - (IxQMgrQId)0, - (char *) NULL, - (IxQMgrCallback) NULL, - (IxQMgrCallbackId) 0, - 0, - 0, - 0, - 0, - 0, - 0 - }, - - { /* PlaceHolder for rx queues - * depending on the QoS configured - */ - (IxQMgrQId)0, - (char *) NULL, - (IxQMgrCallback) NULL, - (IxQMgrCallbackId) 0, - 0, - 0, - 0, - 0, - 0, - 0 - }, - - { /* Null Termination entry - */ - (IxQMgrQId)0, - (char *) NULL, - (IxQMgrCallback) NULL, - (IxQMgrCallbackId) 0, - 0, - 0, - 0, - 0, - 0, - 0 - } - -}; - -/* forward declarations */ -IX_ETH_ACC_PRIVATE IxEthAccStatus -ixEthAccQMgrQueueSetup(IxEthAccQregInfo *qInfoDes); - -/** - * @fn ixEthAccQMgrQueueSetup(void) - * - * @brief Setup one queue and its event, and register the callback required - * by this component to the QMgr - * - * @internal - */ -IX_ETH_ACC_PRIVATE IxEthAccStatus -ixEthAccQMgrQueueSetup(IxEthAccQregInfo *qInfoDes) -{ - /* - * Configure each Q. - */ - if ( ixQMgrQConfig( qInfoDes->qName, - qInfoDes->qId, - qInfoDes->qSize, - qInfoDes->qWords) != IX_SUCCESS) - { - return IX_ETH_ACC_FAIL; - } - - if ( ixQMgrWatermarkSet( qInfoDes->qId, - qInfoDes->AlmostEmptyThreshold, - qInfoDes->AlmostFullThreshold - ) != IX_SUCCESS) - { - return IX_ETH_ACC_FAIL; - } - - /* - * Set dispatcher priority. - */ - if ( ixQMgrDispatcherPrioritySet( qInfoDes->qId, - IX_ETH_ACC_QM_QUEUE_DISPATCH_PRIORITY) - != IX_SUCCESS) - { - return IX_ETH_ACC_FAIL; - } - - /* - * Register callbacks for each Q. - */ - if ( ixQMgrNotificationCallbackSet(qInfoDes->qId, - qInfoDes->qCallback, - qInfoDes->callbackTag) - != IX_SUCCESS ) - { - return IX_ETH_ACC_FAIL; - } - - /* - * Set notification condition for Q - */ - if (qInfoDes->qNotificationEnableAtStartup == true) - { - if ( ixQMgrNotificationEnable(qInfoDes->qId, - qInfoDes->qConditionSource) - != IX_SUCCESS ) - { - return IX_ETH_ACC_FAIL; - } - } - - return(IX_ETH_ACC_SUCCESS); -} - -/** - * @fn ixEthAccQMgrQueuesConfig(void) - * - * @brief Setup all the queues and register all callbacks required - * by this component to the QMgr - * - * The RxFree queues, tx queues, rx queues are configured statically - * - * Rx queues configuration is driven by QoS setup. - * Many Rx queues may be required when QoS is enabled (this depends - * on IxEthDB setup and the images being downloaded). The configuration - * of the rxQueues is done in many steps as follows: - * - * @li select all Rx queues as configured by ethDB for all ports - * @li sort the queues by traffic class - * @li build the priority dependency for all queues - * @li fill the configuration for all rx queues - * @li configure all statically configured queues - * @li configure all dynamically configured queues - * - * @param none - * - * @return IxEthAccStatus - * - * @internal - */ -IX_ETH_ACC_PUBLIC -IxEthAccStatus ixEthAccQMgrQueuesConfig(void) -{ - struct - { - int npeCount; - UINT32 npeId; - IxQMgrQId qId; - IxEthDBProperty trafficClass; - } rxQueues[IX_ETHACC_MAX_RX_QUEUES]; - - UINT32 rxQueue = 0; - UINT32 rxQueueCount = 0; - IxQMgrQId ixQId =IX_QMGR_MAX_NUM_QUEUES; - IxEthDBStatus ixEthDBStatus = IX_ETH_DB_SUCCESS; - IxEthDBPortId ixEthDbPortId = 0; - IxEthAccPortId ixEthAccPortId = 0; - UINT32 ixNpeId = 0; - UINT32 ixHighestNpeId = 0; - UINT32 sortIterations = 0; - IxEthAccStatus ret = IX_ETH_ACC_SUCCESS; - IxEthAccQregInfo *qInfoDes = NULL; - IxEthDBProperty ixEthDBTrafficClass = IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY; - IxEthDBPropertyType ixEthDBPropertyType = IX_ETH_DB_INTEGER_PROPERTY; - UINT32 ixEthDBParameter = 0; - BOOL completelySorted = false; - - /* Fill the corspondance between ports and queues - * This defines the mapping from port to queue Ids. - */ - - ixEthAccPortData[IX_ETH_PORT_1].ixEthAccRxData.rxFreeQueue - = IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q; - ixEthAccPortData[IX_ETH_PORT_2].ixEthAccRxData.rxFreeQueue - = IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q; -#ifdef __ixp46X - ixEthAccPortData[IX_ETH_PORT_3].ixEthAccRxData.rxFreeQueue - = IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q; -#endif - ixEthAccPortData[IX_ETH_PORT_1].ixEthAccTxData.txQueue - = IX_ETH_ACC_TX_FRAME_ENET0_Q; - ixEthAccPortData[IX_ETH_PORT_2].ixEthAccTxData.txQueue - = IX_ETH_ACC_TX_FRAME_ENET1_Q; -#ifdef __ixp46X - ixEthAccPortData[IX_ETH_PORT_3].ixEthAccTxData.txQueue - = IX_ETH_ACC_TX_FRAME_ENET2_Q; -#endif - /* Fill the corspondance between ports and NPEs - * This defines the mapping from port to npeIds. - */ - - ixEthAccPortData[IX_ETH_PORT_1].npeId = IX_NPEMH_NPEID_NPEB; - ixEthAccPortData[IX_ETH_PORT_2].npeId = IX_NPEMH_NPEID_NPEC; -#ifdef __ixp46X - ixEthAccPortData[IX_ETH_PORT_3].npeId = IX_NPEMH_NPEID_NPEA; -#endif - /* set the default rx scheduling discipline */ - ixEthAccDataInfo.schDiscipline = FIFO_NO_PRIORITY; - - /* - * Queue Selection step: - * - * The following code selects all the queues and build - * a temporary array which contains for each queue - * - the queue Id, - * - the highest traffic class (in case of many - * priorities configured for the same queue on different - * ports) - * - the number of different Npes which are - * configured to write to this queue. - * - * The output of this loop is a temporary array of RX queues - * in any order. - * - */ -#ifdef CONFIG_IXP425_COMPONENT_ETHDB - for (ixEthAccPortId = 0; - (ixEthAccPortId < IX_ETH_ACC_NUMBER_OF_PORTS) - && (ret == IX_ETH_ACC_SUCCESS); - ixEthAccPortId++) - { - /* map between ethDb and ethAcc port Ids */ - ixEthDbPortId = (IxEthDBPortId)ixEthAccPortId; - - /* map between npeId and ethAcc port Ids */ - ixNpeId = IX_ETH_ACC_PORT_TO_NPE_ID(ixEthAccPortId); - - /* Iterate thru the different priorities */ - for (ixEthDBTrafficClass = IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY; - ixEthDBTrafficClass <= IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY; - ixEthDBTrafficClass++) - { - ixEthDBStatus = ixEthDBFeaturePropertyGet( - ixEthDbPortId, - IX_ETH_DB_VLAN_QOS, - ixEthDBTrafficClass, - &ixEthDBPropertyType, - (void *)&ixEthDBParameter); - - if (ixEthDBStatus == IX_ETH_DB_SUCCESS) - { - /* This port and QoS class are mapped to - * a RX queue. - */ - if (ixEthDBPropertyType == IX_ETH_DB_INTEGER_PROPERTY) - { - /* remember the highest npe Id supporting ethernet */ - if (ixNpeId > ixHighestNpeId) - { - ixHighestNpeId = ixNpeId; - } - - /* search the queue in the list of queues - * already used by an other port or QoS - */ - for (rxQueue = 0; - rxQueue < rxQueueCount; - rxQueue++) - { - if (rxQueues[rxQueue].qId == (IxQMgrQId)ixEthDBParameter) - { - /* found an existing setup, update the number of ports - * for this queue if the port maps to - * a different NPE. - */ - if (rxQueues[rxQueue].npeId != ixNpeId) - { - rxQueues[rxQueue].npeCount++; - rxQueues[rxQueue].npeId = ixNpeId; - } - /* get the highest traffic class for this queue */ - if (rxQueues[rxQueue].trafficClass > ixEthDBTrafficClass) - { - rxQueues[rxQueue].trafficClass = ixEthDBTrafficClass; - } - break; - } - } - if (rxQueue == rxQueueCount) - { - /* new queue not found in the current list, - * add a new entry. - */ - IX_OSAL_ASSERT(rxQueueCount < IX_ETHACC_MAX_RX_QUEUES); - rxQueues[rxQueueCount].qId = ixEthDBParameter; - rxQueues[rxQueueCount].npeCount = 1; - rxQueues[rxQueueCount].npeId = ixNpeId; - rxQueues[rxQueueCount].trafficClass = ixEthDBTrafficClass; - rxQueueCount++; - } - } - else - { - /* unexpected property type (not Integer) */ - ret = IX_ETH_ACC_FAIL; - - IX_ETH_ACC_WARNING_LOG("ixEthAccQMgrQueuesConfig: unexpected property type returned by EthDB\n", 0, 0, 0, 0, 0, 0); - - /* no point to continue to iterate */ - break; - } - } - else - { - /* No Rx queue configured for this port - * and this traffic class. Do nothing. - */ - } - } - - /* notify EthDB that queue initialization is complete and traffic class allocation is frozen */ - ixEthDBFeaturePropertySet(ixEthDbPortId, - IX_ETH_DB_VLAN_QOS, - IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE, - NULL /* ignored */); - } - -#else - - ixNpeId = IX_ETH_ACC_PORT_TO_NPE_ID(ixEthAccPortId); - rxQueues[0].qId = 4; - rxQueues[0].npeCount = 1; - rxQueues[0].npeId = ixNpeId; - rxQueues[0].trafficClass = IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY; - rxQueueCount++; - -#endif - - /* check there is at least 1 rx queue : there is no point - * to continue if there is no rx queue configured - */ - if ((rxQueueCount == 0) || (ret == IX_ETH_ACC_FAIL)) - { - IX_ETH_ACC_WARNING_LOG("ixEthAccQMgrQueuesConfig: no queues configured, bailing out\n", 0, 0, 0, 0, 0, 0); - return (IX_ETH_ACC_FAIL); - } - - /* Queue sort step: - * - * Re-order the array of queues by decreasing traffic class - * using a bubble sort. (trafficClass 0 is the lowest - * priority traffic, trafficClass 7 is the highest priority traffic) - * - * Primary sort order is traffic class - * Secondary sort order is npeId - * - * Note that a bubble sort algorithm is not very efficient when - * the number of queues grows . However, this is not a very bad choice - * considering the very small number of entries to sort. Also, bubble - * sort is extremely fast when the list is already sorted. - * - * The output of this loop is a sorted array of queues. - * - */ - sortIterations = 0; - do - { - sortIterations++; - completelySorted = true; - for (rxQueue = 0; - rxQueue < rxQueueCount - sortIterations; - rxQueue++) - { - /* compare adjacent elements */ - if ((rxQueues[rxQueue].trafficClass < - rxQueues[rxQueue+1].trafficClass) - || ((rxQueues[rxQueue].trafficClass == - rxQueues[rxQueue+1].trafficClass) - &&(rxQueues[rxQueue].npeId < - rxQueues[rxQueue+1].npeId))) - { - /* swap adjacent elements */ - int npeCount = rxQueues[rxQueue].npeCount; - UINT32 npeId = rxQueues[rxQueue].npeId; - IxQMgrQId qId = rxQueues[rxQueue].qId; - IxEthDBProperty trafficClass = rxQueues[rxQueue].trafficClass; - rxQueues[rxQueue].npeCount = rxQueues[rxQueue+1].npeCount; - rxQueues[rxQueue].npeId = rxQueues[rxQueue+1].npeId; - rxQueues[rxQueue].qId = rxQueues[rxQueue+1].qId; - rxQueues[rxQueue].trafficClass = rxQueues[rxQueue+1].trafficClass; - rxQueues[rxQueue+1].npeCount = npeCount; - rxQueues[rxQueue+1].npeId = npeId; - rxQueues[rxQueue+1].qId = qId; - rxQueues[rxQueue+1].trafficClass = trafficClass; - completelySorted = false; - } - } - } - while (!completelySorted); - - /* Queue traffic class list: - * - * Fill an array of rx queues linked by ascending traffic classes. - * - * If the queues are configured as follows - * qId 6 -> traffic class 0 (lowest) - * qId 7 -> traffic class 0 - * qId 8 -> traffic class 6 - * qId 12 -> traffic class 7 (highest) - * - * Then the output of this loop will be - * - * higherPriorityQueue[6] = 8 - * higherPriorityQueue[7] = 8 - * higherPriorityQueue[8] = 12 - * higherPriorityQueue[12] = Invalid queueId - * higherPriorityQueue[...] = Invalid queueId - * - * Note that this queue ordering does not handle all possibilities - * that could result from different rules associated with different - * ports, and inconsistencies in the rules. In all cases, the - * output of this algorithm is a simple linked list of queues, - * without closed circuit. - - * This list is implemented as an array with invalid values initialized - * with an "invalid" queue id which is the maximum number of queues. - * - */ - - /* - * Initialise the rx queue list. - */ - for (rxQueue = 0; rxQueue < IX_QMGR_MAX_NUM_QUEUES; rxQueue++) - { - ixEthAccDataInfo.higherPriorityQueue[rxQueue] = IX_QMGR_MAX_NUM_QUEUES; - } - - /* build the linked list for this NPE. - */ - for (ixNpeId = 0; - ixNpeId <= ixHighestNpeId; - ixNpeId++) - { - /* iterate thru the sorted list of queues - */ - ixQId = IX_QMGR_MAX_NUM_QUEUES; - for (rxQueue = 0; - rxQueue < rxQueueCount; - rxQueue++) - { - if (rxQueues[rxQueue].npeId == ixNpeId) - { - ixEthAccDataInfo.higherPriorityQueue[rxQueues[rxQueue].qId] = ixQId; - /* iterate thru queues with the same traffic class - * than the current queue. (queues are ordered by descending - * traffic classes and npeIds). - */ - while ((rxQueue < rxQueueCount - 1) - && (rxQueues[rxQueue].trafficClass - == rxQueues[rxQueue+1].trafficClass) - && (ixNpeId == rxQueues[rxQueue].npeId)) - { - rxQueue++; - ixEthAccDataInfo.higherPriorityQueue[rxQueues[rxQueue].qId] = ixQId; - } - ixQId = rxQueues[rxQueue].qId; - } - } - } - - /* point on the first dynamic queue description */ - qInfoDes = ixEthAccQmgrRxQueuesInfo; - - /* update the list of queues with the rx queues */ - for (rxQueue = 0; - (rxQueue < rxQueueCount) && (ret == IX_ETH_ACC_SUCCESS); - rxQueue++) - { - /* Don't utilize more than IX_ETHACC_MAX_LARGE_RX_QUEUES queues - * with the full 128 entries. For the lower priority queues, use - * a smaller number of entries. This ensures queue resources - * remain available for other components. - */ - if( (rxQueueCount > IX_ETHACC_MAX_LARGE_RX_QUEUES) && - (rxQueue < rxQueueCount - IX_ETHACC_MAX_LARGE_RX_QUEUES) ) - { - /* add the small RX Queue setup template to the list of queues */ - memcpy(qInfoDes, &ixEthAccQmgrRxSmallTemplate, sizeof(*qInfoDes)); - } else { - /* add the default RX Queue setup template to the list of queues */ - memcpy(qInfoDes, &ixEthAccQmgrRxDefaultTemplate, sizeof(*qInfoDes)); - } - - /* setup the RxQueue ID */ - qInfoDes->qId = rxQueues[rxQueue].qId; - - /* setup the RxQueue watermark level - * - * Each queue can be filled by many NPEs. To avoid the - * NPEs to write to a full queue, need to set the - * high watermark level for nearly full condition. - * (the high watermark level are a power of 2 - * starting from the top of the queue) - * - * Number of watermark - * ports level - * 1 0 - * 2 1 - * 3 2 - * 4 4 - * 5 4 - * 6 8 - * n approx. 2**ceil(log2(n)) - */ - if (rxQueues[rxQueue].npeCount == 1) - { - qInfoDes->AlmostFullThreshold = IX_QMGR_Q_WM_LEVEL0; - } - else if (rxQueues[rxQueue].npeCount == 2) - { - qInfoDes->AlmostFullThreshold = IX_QMGR_Q_WM_LEVEL1; - } - else if (rxQueues[rxQueue].npeCount == 3) - { - qInfoDes->AlmostFullThreshold = IX_QMGR_Q_WM_LEVEL2; - } - else - { - /* reach the maximum number for CSR 2.0 */ - IX_ETH_ACC_WARNING_LOG("ixEthAccQMgrQueuesConfig: maximum number of NPEs per queue reached, bailing out\n", 0, 0, 0, 0, 0, 0); - ret = IX_ETH_ACC_FAIL; - break; - } - - /* move to next queue entry */ - ++qInfoDes; - } - - /* configure the static list (RxFree, Tx and TxDone queues) */ - for (qInfoDes = ixEthAccQmgrStaticInfo; - (qInfoDes->qCallback != (IxQMgrCallback) NULL ) - && (ret == IX_ETH_ACC_SUCCESS); - ++qInfoDes) - { - ret = ixEthAccQMgrQueueSetup(qInfoDes); - } - - /* configure the dynamic list (Rx queues) */ - for (qInfoDes = ixEthAccQmgrRxQueuesInfo; - (qInfoDes->qCallback != (IxQMgrCallback) NULL ) - && (ret == IX_ETH_ACC_SUCCESS); - ++qInfoDes) - { - ret = ixEthAccQMgrQueueSetup(qInfoDes); - } - - return(ret); -} - -/** - * @fn ixEthAccQMgrRxQEntryGet(UINT32 *rxQueueEntries) - * - * @brief Add and return the total number of entries in all Rx queues - * - * @param UINT32 rxQueueEntries[in] number of entries in all queues - * - * @return void - * - * @note Rx queues configuration is driven by Qos Setup. There is a - * variable number of rx queues which are set at initialisation. - * - * @internal - */ -IX_ETH_ACC_PUBLIC -void ixEthAccQMgrRxQEntryGet(UINT32 *numRxQueueEntries) -{ - UINT32 rxQueueLevel; - IxEthAccQregInfo *qInfoDes;; - - *numRxQueueEntries = 0; - - /* iterate thru rx queues */ - for (qInfoDes = ixEthAccQmgrRxQueuesInfo; - qInfoDes->qCallback != (IxQMgrCallback)NULL; - ++qInfoDes) - { - /* retrieve the rx queue level */ - rxQueueLevel = 0; - ixQMgrQNumEntriesGet(qInfoDes->qId, &rxQueueLevel); - (*numRxQueueEntries) += rxQueueLevel; - } -} - -/** - * @fn ixEthAccQMgrRxCallbacksRegister(IxQMgrCallback ixQMgrCallback) - * - * @brief Change the callback registered to all rx queues. - * - * @param IxQMgrCallback ixQMgrCallback[in] QMgr callback to register - * - * @return IxEthAccStatus - * - * @note The user may decide to use different Rx mechanisms - * (e.g. receive many frames at the same time , or receive - * one frame at a time, depending on the overall application - * performances). A different QMgr callback is registered. This - * way, there is no excessive pointer checks in the datapath. - * - * @internal - */ -IX_ETH_ACC_PUBLIC -IxEthAccStatus ixEthAccQMgrRxCallbacksRegister(IxQMgrCallback ixQMgrCallback) -{ - IxEthAccQregInfo *qInfoDes; - IxEthAccStatus ret = IX_ETH_ACC_SUCCESS; - - /* parameter check */ - if (NULL == ixQMgrCallback) - { - ret = IX_ETH_ACC_FAIL; - } - - /* iterate thru rx queues */ - for (qInfoDes = ixEthAccQmgrRxQueuesInfo; - (qInfoDes->qCallback != (IxQMgrCallback) NULL ) - && (ret == IX_ETH_ACC_SUCCESS); - ++qInfoDes) - { - /* register the rx callback for all queues */ - if (ixQMgrNotificationCallbackSet(qInfoDes->qId, - ixQMgrCallback, - qInfoDes->callbackTag - ) != IX_SUCCESS) - { - ret = IX_ETH_ACC_FAIL; - } - } - return(ret); -} - -/** - * @fn ixEthAccSingleEthNpeCheck(IxEthAccPortId portId) - * - * @brief Check the npe exists for this port - * - * @param IxEthAccPortId portId[in] port - * - * @return IxEthAccStatus - * - * @internal - */ -IX_ETH_ACC_PUBLIC -IxEthAccStatus ixEthAccSingleEthNpeCheck(IxEthAccPortId portId) -{ - - /* If not IXP42X A0 stepping, proceed to check for existence of coprocessors */ - if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != - (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) - || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) - { - if ((IX_ETH_PORT_1 == portId) && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) == - IX_FEATURE_CTRL_COMPONENT_ENABLED)) - { - return IX_ETH_ACC_SUCCESS; - } - - if ((IX_ETH_PORT_2 == portId) && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) == - IX_FEATURE_CTRL_COMPONENT_ENABLED)) - { - return IX_ETH_ACC_SUCCESS; - } - - if ((IX_ETH_PORT_3 == portId) && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA_ETH) == - IX_FEATURE_CTRL_COMPONENT_ENABLED)) - { - return IX_ETH_ACC_SUCCESS; - } - - return IX_ETH_ACC_FAIL; - } - - return IX_ETH_ACC_SUCCESS; -} - -/** - * @fn ixEthAccStatsShow(void) - * - * @brief Displays all EthAcc stats - * - * @return void - * - */ -void ixEthAccStatsShow(IxEthAccPortId portId) -{ - ixEthAccMdioShow(); - - printf("\nPort %u\nUnicast MAC : ", portId); - ixEthAccPortUnicastAddressShow(portId); - ixEthAccPortMulticastAddressShow(portId); - printf("\n"); - - ixEthAccDataPlaneShow(); -} - - - diff --git a/drivers/net/npe/IxEthAccControlInterface.c b/drivers/net/npe/IxEthAccControlInterface.c deleted file mode 100644 index dbe32e133c..0000000000 --- a/drivers/net/npe/IxEthAccControlInterface.c +++ /dev/null @@ -1,509 +0,0 @@ -/** - * @file IxEthAccControlInterface.c - * - * @author Intel Corporation - * @date - * - * @brief IX_ETH_ACC_PUBLIC wrappers for control plane functions - * - * Design Notes: - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxOsal.h" -#include "IxEthAcc.h" -#include "IxEthAcc_p.h" - -PUBLIC IxOsalMutex ixEthAccControlInterfaceMutex; - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortEnable(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - printf("EthAcc: (Mac) cannot enable port %d, service not initialized\n", portId); - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortEnablePriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortDisable(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - /* check the context is iinitialized */ - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortDisablePriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortEnabledQuery(IxEthAccPortId portId, BOOL *enabled) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortEnabledQueryPriv(portId, enabled); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortPromiscuousModeClear(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortPromiscuousModeClearPriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortPromiscuousModeSet(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortPromiscuousModeSetPriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortUnicastMacAddressSet(IxEthAccPortId portId, IxEthAccMacAddr *macAddr) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortUnicastMacAddressSetPriv(portId, macAddr); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortUnicastMacAddressGet(IxEthAccPortId portId, IxEthAccMacAddr *macAddr) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortUnicastMacAddressGetPriv(portId, macAddr); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortMulticastAddressJoin(IxEthAccPortId portId, IxEthAccMacAddr *macAddr) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortMulticastAddressJoinPriv(portId, macAddr); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortMulticastAddressJoinAll(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortMulticastAddressJoinAllPriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortMulticastAddressLeave(IxEthAccPortId portId, IxEthAccMacAddr *macAddr) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortMulticastAddressLeavePriv(portId, macAddr); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortMulticastAddressLeaveAll(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortMulticastAddressLeaveAllPriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortUnicastAddressShow(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortUnicastAddressShowPriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC void -ixEthAccPortMulticastAddressShow(IxEthAccPortId portId) -{ - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return; - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - ixEthAccPortMulticastAddressShowPriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortDuplexModeSet(IxEthAccPortId portId, IxEthAccDuplexMode mode) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortDuplexModeSetPriv(portId, mode); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortDuplexModeGet(IxEthAccPortId portId, IxEthAccDuplexMode *mode) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortDuplexModeGetPriv(portId, mode); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortTxFrameAppendPaddingEnable(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortTxFrameAppendPaddingEnablePriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortTxFrameAppendPaddingDisable(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortTxFrameAppendPaddingDisablePriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortTxFrameAppendFCSEnable(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortTxFrameAppendFCSEnablePriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortTxFrameAppendFCSDisable(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortTxFrameAppendFCSDisablePriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortRxFrameAppendFCSEnable(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortRxFrameAppendFCSEnablePriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortRxFrameAppendFCSDisable(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortRxFrameAppendFCSDisablePriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccTxSchedulingDisciplineSet(IxEthAccPortId portId, IxEthAccSchedulerDiscipline sched) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccTxSchedulingDisciplineSetPriv(portId, sched); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccRxSchedulingDisciplineSet(IxEthAccSchedulerDiscipline sched) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccRxSchedulingDisciplineSetPriv(sched); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortNpeLoopbackEnable(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccNpeLoopbackEnablePriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortTxEnable(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortTxEnablePriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortRxEnable(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortRxEnablePriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortNpeLoopbackDisable(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccNpeLoopbackDisablePriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortTxDisable(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortTxDisablePriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortRxDisable(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortRxDisablePriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} - -IX_ETH_ACC_PUBLIC IxEthAccStatus -ixEthAccPortMacReset(IxEthAccPortId portId) -{ - IxEthAccStatus result; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); - result = ixEthAccPortMacResetPriv(portId); - ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); - return result; -} diff --git a/drivers/net/npe/IxEthAccDataPlane.c b/drivers/net/npe/IxEthAccDataPlane.c deleted file mode 100644 index c0b82d99b7..0000000000 --- a/drivers/net/npe/IxEthAccDataPlane.c +++ /dev/null @@ -1,2459 +0,0 @@ -/** - * @file IxEthDataPlane.c - * - * @author Intel Corporation - * @date 12-Feb-2002 - * - * @brief This file contains the implementation of the IXPxxx - * Ethernet Access Data plane component - * - * Design Notes: - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxNpeMh.h" -#include "IxEthAcc.h" -#include "IxEthDB.h" -#include "IxOsal.h" -#include "IxEthDBPortDefs.h" -#include "IxFeatureCtrl.h" -#include "IxEthAcc_p.h" -#include "IxEthAccQueueAssign_p.h" - -extern PUBLIC IxEthAccMacState ixEthAccMacState[]; -extern PUBLIC UINT32 ixEthAccNewSrcMask; - -/** - * private functions prototype - */ -PRIVATE IX_OSAL_MBUF * -ixEthAccEntryFromQConvert(UINT32 qEntry, UINT32 mask); - -PRIVATE UINT32 -ixEthAccMbufRxQPrepare(IX_OSAL_MBUF *mbuf); - -PRIVATE UINT32 -ixEthAccMbufTxQPrepare(IX_OSAL_MBUF *mbuf); - -PRIVATE IxEthAccStatus -ixEthAccTxSwQHighestPriorityGet(IxEthAccPortId portId, - IxEthAccTxPriority *priorityPtr); - -PRIVATE IxEthAccStatus -ixEthAccTxFromSwQ(IxEthAccPortId portId, - IxEthAccTxPriority priority); - -PRIVATE IxEthAccStatus -ixEthAccRxFreeFromSwQ(IxEthAccPortId portId); - -PRIVATE void -ixEthAccMbufFromTxQ(IX_OSAL_MBUF *mbuf); - -PRIVATE void -ixEthAccMbufFromRxQ(IX_OSAL_MBUF *mbuf); - -PRIVATE IX_STATUS -ixEthAccQmgrLockTxWrite(IxEthAccPortId portId, - UINT32 qBuffer); - -PRIVATE IX_STATUS -ixEthAccQmgrLockRxWrite(IxEthAccPortId portId, - UINT32 qBuffer); - -PRIVATE IX_STATUS -ixEthAccQmgrTxWrite(IxEthAccPortId portId, - UINT32 qBuffer, - UINT32 priority); - -/** - * @addtogroup IxEthAccPri - *@{ - */ - -/* increment a counter only when stats are enabled */ -#define TX_STATS_INC(port,field) \ - IX_ETH_ACC_STATS_INC(ixEthAccPortData[port].ixEthAccTxData.stats.field) -#define RX_STATS_INC(port,field) \ - IX_ETH_ACC_STATS_INC(ixEthAccPortData[port].ixEthAccRxData.stats.field) - -/* always increment the counter (mainly used for unexpected errors) */ -#define TX_INC(port,field) \ - ixEthAccPortData[port].ixEthAccTxData.stats.field++ -#define RX_INC(port,field) \ - ixEthAccPortData[port].ixEthAccRxData.stats.field++ - -PRIVATE IxEthAccDataPlaneStats ixEthAccDataStats; - -extern IxEthAccPortDataInfo ixEthAccPortData[]; -extern IxEthAccInfo ixEthAccDataInfo; - -PRIVATE IxOsalFastMutex txWriteMutex[IX_ETH_ACC_NUMBER_OF_PORTS]; -PRIVATE IxOsalFastMutex rxWriteMutex[IX_ETH_ACC_NUMBER_OF_PORTS]; - -/** - * - * @brief Mbuf header conversion macros : they implement the - * different conversions using a temporary value. They also double-check - * that the parameters can be converted to/from NPE format. - * - */ -#if defined(__wince) && !defined(IN_KERNEL) -#define PTR_VIRT2NPE(ptrSrc,dst) \ - do { UINT32 temp; \ - IX_OSAL_ENSURE(sizeof(ptrSrc) == sizeof(UINT32), "Wrong parameter type"); \ - IX_OSAL_ENSURE(sizeof(dst) == sizeof(UINT32), "Wrong parameter type"); \ - temp = (UINT32)IX_OSAL_MBUF_MBUF_VIRTUAL_TO_PHYSICAL_TRANSLATION((IX_OSAL_MBUF*)ptrSrc); \ - (dst) = IX_OSAL_SWAP_BE_SHARED_LONG(temp); } \ - while(0) - -#define PTR_NPE2VIRT(type,src,ptrDst) \ - do { void *temp; \ - IX_OSAL_ENSURE(sizeof(type) == sizeof(UINT32), "Wrong parameter type"); \ - IX_OSAL_ENSURE(sizeof(src) == sizeof(UINT32), "Wrong parameter type"); \ - IX_OSAL_ENSURE(sizeof(ptrDst) == sizeof(UINT32), "Wrong parameter type"); \ - temp = (void *)IX_OSAL_SWAP_BE_SHARED_LONG(src); \ - (ptrDst) = (type)IX_OSAL_MBUF_MBUF_PHYSICAL_TO_VIRTUAL_TRANSLATION(temp); } \ - while(0) -#else -#define PTR_VIRT2NPE(ptrSrc,dst) \ - do { UINT32 temp; \ - IX_OSAL_ENSURE(sizeof(ptrSrc) == sizeof(UINT32), "Wrong parameter type"); \ - IX_OSAL_ENSURE(sizeof(dst) == sizeof(UINT32), "Wrong parameter type"); \ - temp = (UINT32)IX_OSAL_MMU_VIRT_TO_PHYS(ptrSrc); \ - (dst) = IX_OSAL_SWAP_BE_SHARED_LONG(temp); } \ - while(0) - -#define PTR_NPE2VIRT(type,src,ptrDst) \ - do { void *temp; \ - IX_OSAL_ENSURE(sizeof(type) == sizeof(UINT32), "Wrong parameter type"); \ - IX_OSAL_ENSURE(sizeof(src) == sizeof(UINT32), "Wrong parameter type"); \ - IX_OSAL_ENSURE(sizeof(ptrDst) == sizeof(UINT32), "Wrong parameter type"); \ - temp = (void *)IX_OSAL_SWAP_BE_SHARED_LONG(src); \ - (ptrDst) = (type)IX_OSAL_MMU_PHYS_TO_VIRT(temp); } \ - while(0) -#endif - -/** - * - * @brief Mbuf payload pointer conversion macros : Wince has its own - * method to convert the buffer pointers - */ -#if defined(__wince) && !defined(IN_KERNEL) -#define DATAPTR_VIRT2NPE(ptrSrc,dst) \ - do { UINT32 temp; \ - temp = (UINT32)IX_OSAL_MBUF_DATA_VIRTUAL_TO_PHYSICAL_TRANSLATION(ptrSrc); \ - (dst) = IX_OSAL_SWAP_BE_SHARED_LONG(temp); } \ - while(0) - -#else -#define DATAPTR_VIRT2NPE(ptrSrc,dst) PTR_VIRT2NPE(IX_OSAL_MBUF_MDATA(ptrSrc),dst) -#endif - - -/* Flush the shared part of the mbuf header */ -#define IX_ETHACC_NE_CACHE_FLUSH(mbufPtr) \ - do { \ - IX_OSAL_CACHE_FLUSH(IX_ETHACC_NE_SHARED(mbufPtr), \ - sizeof(IxEthAccNe)); \ - } \ - while(0) - -/* Invalidate the shared part of the mbuf header */ -#define IX_ETHACC_NE_CACHE_INVALIDATE(mbufPtr) \ - do { \ - IX_OSAL_CACHE_INVALIDATE(IX_ETHACC_NE_SHARED(mbufPtr), \ - sizeof(IxEthAccNe)); \ - } \ - while(0) - -/* Preload one cache line (shared mbuf headers are aligned - * and their size is 1 cache line) - * - * IX_OSAL_CACHED is defined when the mbuf headers are - * allocated from cached memory. - * - * Other processor on emulation environment may not implement - * preload function - */ -#ifdef IX_OSAL_CACHED - #if (CPU!=SIMSPARCSOLARIS) && !defined (__wince) - #define IX_ACC_DATA_CACHE_PRELOAD(ptr) \ - do { /* preload a cache line (Xscale Processor) */ \ - __asm__ (" pld [%0]\n": : "r" (ptr)); \ - } \ - while(0) - #else - /* preload not implemented on different processor */ - #define IX_ACC_DATA_CACHE_PRELOAD(mbufPtr) \ - do { /* nothing */ } while (0) - #endif -#else - /* preload not needed if cache is not enabled */ - #define IX_ACC_DATA_CACHE_PRELOAD(mbufPtr) \ - do { /* nothing */ } while (0) -#endif - -/** - * - * @brief function to retrieve the correct pointer from - * a queue entry posted by the NPE - * - * @param qEntry : entry from qmgr queue - * mask : applicable mask for this queue - * (4 most significant bits are used for additional informations) - * - * @return IX_OSAL_MBUF * pointer to mbuf header - * - * @internal - */ -PRIVATE IX_OSAL_MBUF * -ixEthAccEntryFromQConvert(UINT32 qEntry, UINT32 mask) -{ - IX_OSAL_MBUF *mbufPtr; - - if (qEntry != 0) - { - /* mask NPE bits (e.g. priority, port ...) */ - qEntry &= mask; - -#if IX_ACC_DRAM_PHYS_OFFSET != 0 - /* restore the original address pointer (if PHYS_OFFSET is not 0) */ - qEntry |= (IX_ACC_DRAM_PHYS_OFFSET & ~IX_ETHNPE_QM_Q_RXENET_ADDR_MASK); -#endif - /* get the mbuf pointer address from the npe-shared address */ - qEntry -= offsetof(IX_OSAL_MBUF,ix_ne); - - /* phys2virt mbuf */ - mbufPtr = (IX_OSAL_MBUF *)IX_OSAL_MMU_PHYS_TO_VIRT(qEntry); - - /* preload the cacheline shared with NPE */ - IX_ACC_DATA_CACHE_PRELOAD(IX_ETHACC_NE_SHARED(mbufPtr)); - - /* preload the cacheline used by xscale */ - IX_ACC_DATA_CACHE_PRELOAD(mbufPtr); - } - else - { - mbufPtr = NULL; - } - - return mbufPtr; -} - -/* Convert the mbuf header for NPE transmission */ -PRIVATE UINT32 -ixEthAccMbufTxQPrepare(IX_OSAL_MBUF *mbuf) -{ - UINT32 qbuf; - UINT32 len; - - /* endianess swap for tci and flags - note: this is done only once, even for chained buffers */ - IX_ETHACC_NE_FLAGS(mbuf) = IX_OSAL_SWAP_BE_SHARED_SHORT(IX_ETHACC_NE_FLAGS(mbuf)); - IX_ETHACC_NE_VLANTCI(mbuf) = IX_OSAL_SWAP_BE_SHARED_SHORT(IX_ETHACC_NE_VLANTCI(mbuf)); - - /* test for unchained mbufs */ - if (IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mbuf) == NULL) - { - /* "best case" scenario : unchained mbufs */ - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.unchainedTxMBufs); - - /* payload pointer conversion */ - DATAPTR_VIRT2NPE(mbuf, IX_ETHACC_NE_DATA(mbuf)); - - /* unchained mbufs : the frame length is the mbuf length - * and the 2 identical lengths are stored in the same - * word. - */ - len = IX_OSAL_MBUF_MLEN(mbuf); - - /* set the length in both length and pktLen 16-bits fields */ - len |= (len << IX_ETHNPE_ACC_LENGTH_OFFSET); - IX_ETHACC_NE_LEN(mbuf) = IX_OSAL_SWAP_BE_SHARED_LONG(len); - - /* unchained mbufs : next contains 0 */ - IX_ETHACC_NE_NEXT(mbuf) = 0; - - /* flush shared header after all address conversions */ - IX_ETHACC_NE_CACHE_FLUSH(mbuf); - } - else - { - /* chained mbufs */ - IX_OSAL_MBUF *ptr = mbuf; - IX_OSAL_MBUF *nextPtr; - UINT32 frmLen; - - /* get the frame length from the header of the first buffer */ - frmLen = IX_OSAL_MBUF_PKT_LEN(mbuf); - - do - { - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.chainedTxMBufs); - - /* payload pointer */ - DATAPTR_VIRT2NPE(ptr,IX_ETHACC_NE_DATA(ptr)); - /* Buffer length and frame length are stored in the same word */ - len = IX_OSAL_MBUF_MLEN(ptr); - len = frmLen | (len << IX_ETHNPE_ACC_LENGTH_OFFSET); - IX_ETHACC_NE_LEN(ptr) = IX_OSAL_SWAP_BE_SHARED_LONG(len); - - /* get the virtual next chain pointer */ - nextPtr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(ptr); - if (nextPtr != NULL) - { - /* shared pointer of the next buffer is chained */ - PTR_VIRT2NPE(IX_ETHACC_NE_SHARED(nextPtr), - IX_ETHACC_NE_NEXT(ptr)); - } - else - { - IX_ETHACC_NE_NEXT(ptr) = 0; - } - - /* flush shared header after all address conversions */ - IX_ETHACC_NE_CACHE_FLUSH(ptr); - - /* move to next buffer */ - ptr = nextPtr; - - /* the frame length field is set only in the first buffer - * and is zeroed in the next buffers - */ - frmLen = 0; - } - while(ptr != NULL); - - } - - /* virt2phys mbuf itself */ - qbuf = (UINT32)IX_OSAL_MMU_VIRT_TO_PHYS( - IX_ETHACC_NE_SHARED(mbuf)); - - /* Ensure the bits which are reserved to exchange information with - * the NPE are cleared - * - * If the mbuf address is not correctly aligned, or from an - * incompatible memory range, there is no point to continue - */ - IX_OSAL_ENSURE(((qbuf & ~IX_ETHNPE_QM_Q_TXENET_ADDR_MASK) == 0), - "Invalid address range"); - - return qbuf; -} - -/* Convert the mbuf header for NPE reception */ -PRIVATE UINT32 -ixEthAccMbufRxQPrepare(IX_OSAL_MBUF *mbuf) -{ - UINT32 len; - UINT32 qbuf; - - if (IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mbuf) == NULL) - { - /* "best case" scenario : unchained mbufs */ - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.unchainedRxFreeMBufs); - - /* unchained mbufs : payload pointer */ - DATAPTR_VIRT2NPE(mbuf, IX_ETHACC_NE_DATA(mbuf)); - - /* unchained mbufs : set the buffer length - * and the frame length field is zeroed - */ - len = (IX_OSAL_MBUF_MLEN(mbuf) << IX_ETHNPE_ACC_LENGTH_OFFSET); - IX_ETHACC_NE_LEN(mbuf) = IX_OSAL_SWAP_BE_SHARED_LONG(len); - - /* unchained mbufs : next pointer is null */ - IX_ETHACC_NE_NEXT(mbuf) = 0; - - /* flush shared header after all address conversions */ - IX_ETHACC_NE_CACHE_FLUSH(mbuf); - - /* remove shared header cache line */ - IX_ETHACC_NE_CACHE_INVALIDATE(mbuf); - } - else - { - /* chained mbufs */ - IX_OSAL_MBUF *ptr = mbuf; - IX_OSAL_MBUF *nextPtr; - - do - { - /* chained mbufs */ - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.chainedRxFreeMBufs); - - /* we must save virtual next chain pointer */ - nextPtr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(ptr); - - if (nextPtr != NULL) - { - /* chaining pointer for NPE */ - PTR_VIRT2NPE(IX_ETHACC_NE_SHARED(nextPtr), - IX_ETHACC_NE_NEXT(ptr)); - } - else - { - IX_ETHACC_NE_NEXT(ptr) = 0; - } - - /* payload pointer */ - DATAPTR_VIRT2NPE(ptr,IX_ETHACC_NE_DATA(ptr)); - - /* buffer length */ - len = (IX_OSAL_MBUF_MLEN(ptr) << IX_ETHNPE_ACC_LENGTH_OFFSET); - IX_ETHACC_NE_LEN(ptr) = IX_OSAL_SWAP_BE_SHARED_LONG(len); - - /* flush shared header after all address conversions */ - IX_ETHACC_NE_CACHE_FLUSH(ptr); - - /* remove shared header cache line */ - IX_ETHACC_NE_CACHE_INVALIDATE(ptr); - - /* next mbuf in the chain */ - ptr = nextPtr; - } - while(ptr != NULL); - } - - /* virt2phys mbuf itself */ - qbuf = (UINT32)IX_OSAL_MMU_VIRT_TO_PHYS( - IX_ETHACC_NE_SHARED(mbuf)); - - /* Ensure the bits which are reserved to exchange information with - * the NPE are cleared - * - * If the mbuf address is not correctly aligned, or from an - * incompatible memory range, there is no point to continue - */ - IX_OSAL_ENSURE(((qbuf & ~IX_ETHNPE_QM_Q_RXENET_ADDR_MASK) == 0), - "Invalid address range"); - - return qbuf; -} - -/* Convert the mbuf header after NPE transmission - * Since there is nothing changed by the NPE, there is no need - * to process anything but the update of internal stats - * when they are enabled -*/ -PRIVATE void -ixEthAccMbufFromTxQ(IX_OSAL_MBUF *mbuf) -{ -#ifndef NDEBUG - /* test for unchained mbufs */ - if (IX_ETHACC_NE_NEXT(mbuf) == 0) - { - /* unchained mbufs : update the stats */ - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.unchainedTxDoneMBufs); - } - else - { - /* chained mbufs : walk the chain and update the stats */ - IX_OSAL_MBUF *ptr = mbuf; - - do - { - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.chainedTxDoneMBufs); - ptr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(ptr); - } - while (ptr != NULL); - } -#endif -} - -/* Convert the mbuf header after NPE reception */ -PRIVATE void -ixEthAccMbufFromRxQ(IX_OSAL_MBUF *mbuf) -{ - UINT32 len; - - /* endianess swap for tci and flags - note: this is done only once, even for chained buffers */ - IX_ETHACC_NE_FLAGS(mbuf) = IX_OSAL_SWAP_BE_SHARED_SHORT(IX_ETHACC_NE_FLAGS(mbuf)); - IX_ETHACC_NE_VLANTCI(mbuf) = IX_OSAL_SWAP_BE_SHARED_SHORT(IX_ETHACC_NE_VLANTCI(mbuf)); - - /* test for unchained mbufs */ - if (IX_ETHACC_NE_NEXT(mbuf) == 0) - { - /* unchained mbufs */ - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.unchainedRxMBufs); - - /* get the frame length. it is the same than the buffer length */ - len = IX_OSAL_SWAP_BE_SHARED_LONG(IX_ETHACC_NE_LEN(mbuf)); - len &= IX_ETHNPE_ACC_PKTLENGTH_MASK; - IX_OSAL_MBUF_PKT_LEN(mbuf) = IX_OSAL_MBUF_MLEN(mbuf) = len; - - /* clears the next packet field */ - IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mbuf) = NULL; - } - else - { - IX_OSAL_MBUF *ptr = mbuf; - IX_OSAL_MBUF *nextPtr; - UINT32 frmLen; - - /* convert the frame length */ - frmLen = IX_OSAL_SWAP_BE_SHARED_LONG(IX_ETHACC_NE_LEN(mbuf)); - IX_OSAL_MBUF_PKT_LEN(mbuf) = (frmLen & IX_ETHNPE_ACC_PKTLENGTH_MASK); - - /* chained mbufs */ - do - { - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.chainedRxMBufs); - - /* convert the length */ - len = IX_OSAL_SWAP_BE_SHARED_LONG(IX_ETHACC_NE_LEN(ptr)); - IX_OSAL_MBUF_MLEN(ptr) = (len >> IX_ETHNPE_ACC_LENGTH_OFFSET); - - /* get the next pointer */ - PTR_NPE2VIRT(IX_OSAL_MBUF *,IX_ETHACC_NE_NEXT(ptr), nextPtr); - if (nextPtr != NULL) - { - nextPtr = (IX_OSAL_MBUF *)((UINT8 *)nextPtr - offsetof(IX_OSAL_MBUF,ix_ne)); - } - /* set the next pointer */ - IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(ptr) = nextPtr; - - /* move to the next buffer */ - ptr = nextPtr; - } - while (ptr != NULL); - } -} - -/* write to qmgr if possible and report an overflow if not possible - * Use a fast lock to protect the queue write. - * This way, the tx feature is reentrant. - */ -PRIVATE IX_STATUS -ixEthAccQmgrLockTxWrite(IxEthAccPortId portId, UINT32 qBuffer) -{ - IX_STATUS qStatus; - if (ixOsalFastMutexTryLock(&txWriteMutex[portId]) == IX_SUCCESS) - { - qStatus = ixQMgrQWrite( - IX_ETH_ACC_PORT_TO_TX_Q_ID(portId), - &qBuffer); -#ifndef NDEBUG - if (qStatus != IX_SUCCESS) - { - TX_STATS_INC(portId, txOverflow); - } -#endif - ixOsalFastMutexUnlock(&txWriteMutex[portId]); - } - else - { - TX_STATS_INC(portId, txLock); - qStatus = IX_QMGR_Q_OVERFLOW; - } - return qStatus; -} - -/* write to qmgr if possible and report an overflow if not possible - * Use a fast lock to protect the queue write. - * This way, the Rx feature is reentrant. - */ -PRIVATE IX_STATUS -ixEthAccQmgrLockRxWrite(IxEthAccPortId portId, UINT32 qBuffer) -{ - IX_STATUS qStatus; - if (ixOsalFastMutexTryLock(&rxWriteMutex[portId]) == IX_SUCCESS) - { - qStatus = ixQMgrQWrite( - IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(portId), - &qBuffer); -#ifndef NDEBUG - if (qStatus != IX_SUCCESS) - { - RX_STATS_INC(portId, rxFreeOverflow); - } -#endif - ixOsalFastMutexUnlock(&rxWriteMutex[portId]); - } - else - { - RX_STATS_INC(portId, rxFreeLock); - qStatus = IX_QMGR_Q_OVERFLOW; - } - return qStatus; -} - -/* - * Set the priority and write to a qmgr queue. - */ -PRIVATE IX_STATUS -ixEthAccQmgrTxWrite(IxEthAccPortId portId, UINT32 qBuffer, UINT32 priority) -{ - /* fill the priority field */ - qBuffer |= (priority << IX_ETHNPE_QM_Q_FIELD_PRIOR_R); - - return ixEthAccQmgrLockTxWrite(portId, qBuffer); -} - -/** - * - * @brief This function will discover the highest priority S/W Tx Q that - * has entries in it - * - * @param portId - (in) the id of the port whose S/W Tx queues are to be searched - * priorityPtr - (out) the priority of the highest priority occupied q will be written - * here - * - * @return IX_ETH_ACC_SUCCESS if an occupied Q is found - * IX_ETH_ACC_FAIL if no Q has entries - * - * @internal - */ -PRIVATE IxEthAccStatus -ixEthAccTxSwQHighestPriorityGet(IxEthAccPortId portId, - IxEthAccTxPriority *priorityPtr) -{ - if (ixEthAccPortData[portId].ixEthAccTxData.schDiscipline - == FIFO_NO_PRIORITY) - { - if(IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(ixEthAccPortData[portId]. - ixEthAccTxData.txQ[IX_ETH_ACC_TX_DEFAULT_PRIORITY])) - { - return IX_ETH_ACC_FAIL; - } - else - { - *priorityPtr = IX_ETH_ACC_TX_DEFAULT_PRIORITY; - TX_STATS_INC(portId,txPriority[*priorityPtr]); - return IX_ETH_ACC_SUCCESS; - } - } - else - { - IxEthAccTxPriority highestPriority = IX_ETH_ACC_TX_PRIORITY_7; - while(1) - { - if(!IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(ixEthAccPortData[portId]. - ixEthAccTxData.txQ[highestPriority])) - { - - *priorityPtr = highestPriority; - TX_STATS_INC(portId,txPriority[highestPriority]); - return IX_ETH_ACC_SUCCESS; - - } - if (highestPriority == IX_ETH_ACC_TX_PRIORITY_0) - { - return IX_ETH_ACC_FAIL; - } - highestPriority--; - } - } -} - -/** - * - * @brief This function will take a buffer from a TX S/W Q and attempt - * to add it to the relevant TX H/W Q - * - * @param portId - the port whose TX queue is to be written to - * priority - identifies the queue from which the entry is to be read - * - * @internal - */ -PRIVATE IxEthAccStatus -ixEthAccTxFromSwQ(IxEthAccPortId portId, - IxEthAccTxPriority priority) -{ - IX_OSAL_MBUF *mbuf; - IX_STATUS qStatus; - - IX_OSAL_ENSURE((UINT32)priority <= (UINT32)7, "Invalid priority"); - - IX_ETH_ACC_DATAPLANE_REMOVE_MBUF_FROM_Q_HEAD( - ixEthAccPortData[portId].ixEthAccTxData.txQ[priority], - mbuf); - - if (mbuf != NULL) - { - /* - * Add the Tx buffer to the H/W Tx Q - * We do not need to flush here as it is already done - * in TxFrameSubmit(). - */ - qStatus = ixEthAccQmgrTxWrite( - portId, - IX_OSAL_MMU_VIRT_TO_PHYS((UINT32)IX_ETHACC_NE_SHARED(mbuf)), - priority); - - if (qStatus == IX_SUCCESS) - { - TX_STATS_INC(portId,txFromSwQOK); - return IX_SUCCESS; - } - else if (qStatus == IX_QMGR_Q_OVERFLOW) - { - /* - * H/W Q overflow, need to save the buffer - * back on the s/w Q. - * we must put it back on the head of the q to avoid - * reordering packet tx - */ - TX_STATS_INC(portId,txFromSwQDelayed); - IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD( - ixEthAccPortData[portId].ixEthAccTxData.txQ[priority], - mbuf); - - /*enable Q notification*/ - qStatus = ixQMgrNotificationEnable( - IX_ETH_ACC_PORT_TO_TX_Q_ID(portId), - IX_ETH_ACC_PORT_TO_TX_Q_SOURCE(portId)); - - if (qStatus != IX_SUCCESS && qStatus != IX_QMGR_WARNING) - { - TX_INC(portId,txUnexpectedError); - IX_ETH_ACC_FATAL_LOG( - "ixEthAccTxFromSwQ:Unexpected Error: %u\n", - qStatus, 0, 0, 0, 0, 0); - } - } - else - { - TX_INC(portId,txUnexpectedError); - - /* recovery attempt */ - IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD( - ixEthAccPortData[portId].ixEthAccTxData.txQ[priority], - mbuf); - - IX_ETH_ACC_FATAL_LOG( - "ixEthAccTxFromSwQ:Error: unexpected QM status 0x%08X\n", - qStatus, 0, 0, 0, 0, 0); - } - } - else - { - /* sw queue is empty */ - } - return IX_ETH_ACC_FAIL; -} - -/** - * - * @brief This function will take a buffer from a RXfree S/W Q and attempt - * to add it to the relevant RxFree H/W Q - * - * @param portId - the port whose RXFree queue is to be written to - * - * @internal - */ -PRIVATE IxEthAccStatus -ixEthAccRxFreeFromSwQ(IxEthAccPortId portId) -{ - IX_OSAL_MBUF *mbuf; - IX_STATUS qStatus = IX_SUCCESS; - - IX_ETH_ACC_DATAPLANE_REMOVE_MBUF_FROM_Q_HEAD( - ixEthAccPortData[portId].ixEthAccRxData.freeBufferList, - mbuf); - if (mbuf != NULL) - { - /* - * Add The Rx Buffer to the H/W Free buffer Q if possible - */ - qStatus = ixEthAccQmgrLockRxWrite(portId, - IX_OSAL_MMU_VIRT_TO_PHYS( - (UINT32)IX_ETHACC_NE_SHARED(mbuf))); - - if (qStatus == IX_SUCCESS) - { - RX_STATS_INC(portId,rxFreeRepFromSwQOK); - /* - * Buffer added to h/w Q. - */ - return IX_SUCCESS; - } - else if (qStatus == IX_QMGR_Q_OVERFLOW) - { - /* - * H/W Q overflow, need to save the buffer back on the s/w Q. - */ - RX_STATS_INC(portId,rxFreeRepFromSwQDelayed); - - IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD( - ixEthAccPortData[portId].ixEthAccRxData.freeBufferList, - mbuf); - } - else - { - /* unexpected qmgr error */ - RX_INC(portId,rxUnexpectedError); - - IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD( - ixEthAccPortData[portId].ixEthAccRxData.freeBufferList, - mbuf); - - IX_ETH_ACC_FATAL_LOG("IxEthAccRxFreeFromSwQ:Error: unexpected QM status 0x%08X\n", - qStatus, 0, 0, 0, 0, 0); - } - } - else - { - /* sw queue is empty */ - } - return IX_ETH_ACC_FAIL; -} - - -IX_ETH_ACC_PUBLIC -IxEthAccStatus ixEthAccInitDataPlane() -{ - UINT32 portId; - - /* - * Initialize the service and register callback to other services. - */ - - IX_ETH_ACC_MEMSET(&ixEthAccDataStats, - 0, - sizeof(ixEthAccDataStats)); - - for(portId=0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) - { - ixOsalFastMutexInit(&txWriteMutex[portId]); - ixOsalFastMutexInit(&rxWriteMutex[portId]); - - IX_ETH_ACC_MEMSET(&ixEthAccPortData[portId], - 0, - sizeof(ixEthAccPortData[portId])); - - ixEthAccPortData[portId].ixEthAccTxData.schDiscipline = FIFO_NO_PRIORITY; - } - - return (IX_ETH_ACC_SUCCESS); -} - - -IX_ETH_ACC_PUBLIC -IxEthAccStatus ixEthAccPortTxDoneCallbackRegister(IxEthAccPortId portId, - IxEthAccPortTxDoneCallback - txCallbackFn, - UINT32 callbackTag) -{ - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - if (!IX_ETH_ACC_IS_PORT_VALID(portId)) - { - return (IX_ETH_ACC_INVALID_PORT); - } - -/* HACK: removing this code to enable NPE-A preliminary testing - * if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - * { - * IX_ETH_ACC_WARNING_LOG("ixEthAccPortTxDoneCallbackRegister: Unavailable Eth %d: Cannot register TxDone Callback.\n",(INT32)portId,0,0,0,0,0); - * return IX_ETH_ACC_SUCCESS ; - * } - */ - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - if (txCallbackFn == 0) - /* Check for null function pointer here. */ - { - return (IX_ETH_ACC_INVALID_ARG); - } - ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn = txCallbackFn; - ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag = callbackTag; - return (IX_ETH_ACC_SUCCESS); -} - - -IX_ETH_ACC_PUBLIC -IxEthAccStatus ixEthAccPortRxCallbackRegister(IxEthAccPortId portId, - IxEthAccPortRxCallback - rxCallbackFn, - UINT32 callbackTag) -{ - IxEthAccPortId port; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - if (!IX_ETH_ACC_IS_PORT_VALID(portId)) - { - return (IX_ETH_ACC_INVALID_PORT); - } - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("ixEthAccPortRxCallbackRegister: Unavailable Eth %d: Cannot register Rx Callback.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /* Check for null function pointer here. */ - if (rxCallbackFn == NULL) - { - return (IX_ETH_ACC_INVALID_ARG); - } - - /* Check the user is not changing the callback type - * when the port is enabled. - */ - if (ixEthAccMacState[portId].portDisableState == ACTIVE) - { - for (port = 0; port < IX_ETH_ACC_NUMBER_OF_PORTS; port++) - { - if ((ixEthAccMacState[port].portDisableState == ACTIVE) - && (ixEthAccPortData[port].ixEthAccRxData.rxMultiBufferCallbackInUse == true)) - { - /* one of the active ports has a different rx callback type. - * Changing the callback type when the port is enabled - * is not safe - */ - return (IX_ETH_ACC_INVALID_ARG); - } - } - } - - /* update the callback pointer : this is done before - * registering the new qmgr callback - */ - ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn = rxCallbackFn; - ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag = callbackTag; - - /* update the qmgr callback for rx queues */ - if (ixEthAccQMgrRxCallbacksRegister(ixEthRxFrameQMCallback) - != IX_ETH_ACC_SUCCESS) - { - /* unexpected qmgr error */ - IX_ETH_ACC_FATAL_LOG("ixEthAccPortRxCallbackRegister: unexpected QMgr error, " \ - "could not register Rx single-buffer callback\n", 0, 0, 0, 0, 0, 0); - - RX_INC(portId,rxUnexpectedError); - return (IX_ETH_ACC_INVALID_ARG); - } - - ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackInUse = false; - - return (IX_ETH_ACC_SUCCESS); -} - -IX_ETH_ACC_PUBLIC -IxEthAccStatus ixEthAccPortMultiBufferRxCallbackRegister( - IxEthAccPortId portId, - IxEthAccPortMultiBufferRxCallback - rxCallbackFn, - UINT32 callbackTag) -{ - IxEthAccPortId port; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - if (!IX_ETH_ACC_IS_PORT_VALID(portId)) - { - return (IX_ETH_ACC_INVALID_PORT); - } - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("ixEthAccPortMultiBufferRxCallbackRegister: Unavailable Eth %d: Cannot register Rx Callback.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /* Check for null function pointer here. */ - if (rxCallbackFn == NULL) - { - return (IX_ETH_ACC_INVALID_ARG); - } - - /* Check the user is not changing the callback type - * when the port is enabled. - */ - if (ixEthAccMacState[portId].portDisableState == ACTIVE) - { - for (port = 0; port < IX_ETH_ACC_NUMBER_OF_PORTS; port++) - { - if ((ixEthAccMacState[port].portDisableState == ACTIVE) - && (ixEthAccPortData[port].ixEthAccRxData.rxMultiBufferCallbackInUse == false)) - { - /* one of the active ports has a different rx callback type. - * Changing the callback type when the port is enabled - * is not safe - */ - return (IX_ETH_ACC_INVALID_ARG); - } - } - } - - /* update the callback pointer : this is done before - * registering the new qmgr callback - */ - ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn = rxCallbackFn; - ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag = callbackTag; - - /* update the qmgr callback for rx queues */ - if (ixEthAccQMgrRxCallbacksRegister(ixEthRxMultiBufferQMCallback) - != IX_ETH_ACC_SUCCESS) - { - /* unexpected qmgr error */ - RX_INC(portId,rxUnexpectedError); - - IX_ETH_ACC_FATAL_LOG("ixEthAccPortMultiBufferRxCallbackRegister: unexpected QMgr error, " \ - "could not register Rx multi-buffer callback\n", 0, 0, 0, 0, 0, 0); - - return (IX_ETH_ACC_INVALID_ARG); - } - - ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackInUse = true; - - return (IX_ETH_ACC_SUCCESS); -} - -IX_ETH_ACC_PUBLIC -IxEthAccStatus ixEthAccPortTxFrameSubmit(IxEthAccPortId portId, - IX_OSAL_MBUF *buffer, - IxEthAccTxPriority priority) -{ - IX_STATUS qStatus = IX_SUCCESS; - UINT32 qBuffer; - IxEthAccTxPriority highestPriority; - IxQMgrQStatus txQStatus; - -#ifndef NDEBUG - if (buffer == NULL) - { - return (IX_ETH_ACC_FAIL); - } - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - if (!IX_ETH_ACC_IS_PORT_VALID(portId)) - { - return (IX_ETH_ACC_INVALID_PORT); - } - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_FATAL_LOG("ixEthAccPortTxFrameSubmit: Unavailable Eth %d: Cannot submit Tx Frame.\n", - (INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_PORT_UNINITIALIZED ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - if ((UINT32)priority > (UINT32)IX_ETH_ACC_TX_PRIORITY_7) - { - return (IX_ETH_ACC_INVALID_ARG); - } -#endif - - /* - * Need to Flush the MBUF and its contents (data) as it may be - * read from the NPE. Convert virtual addresses to physical addresses also. - */ - qBuffer = ixEthAccMbufTxQPrepare(buffer); - - /* - * If no fifo priority set on Xscale ... - */ - if (ixEthAccPortData[portId].ixEthAccTxData.schDiscipline == - FIFO_NO_PRIORITY) - { - /* - * Add The Tx Buffer to the H/W Tx Q if possible - * (the priority is passed to the NPE, because - * the NPE is able to reorder the frames - * before transmission to the underlying hardware) - */ - qStatus = ixEthAccQmgrTxWrite(portId, - qBuffer, - IX_ETH_ACC_TX_DEFAULT_PRIORITY); - - if (qStatus == IX_SUCCESS) - { - TX_STATS_INC(portId,txQOK); - - /* - * "best case" scenario : Buffer added to h/w Q. - */ - return (IX_SUCCESS); - } - else if (qStatus == IX_QMGR_Q_OVERFLOW) - { - /* - * We were unable to write the buffer to the - * appropriate H/W Q, Save it in the sw Q. - * (use the default priority queue regardless of - * input parameter) - */ - priority = IX_ETH_ACC_TX_DEFAULT_PRIORITY; - } - else - { - /* unexpected qmgr error */ - TX_INC(portId,txUnexpectedError); - IX_ETH_ACC_FATAL_LOG( - "ixEthAccPortTxFrameSubmit:Error: qStatus = %u\n", - (UINT32)qStatus, 0, 0, 0, 0, 0); - return (IX_ETH_ACC_FAIL); - } - } - else if (ixEthAccPortData[portId].ixEthAccTxData.schDiscipline == - FIFO_PRIORITY) - { - - /* - * For priority transmission, put the frame directly on the H/W queue - * if the H/W queue is empty, otherwise, put it in a S/W Q - */ - ixQMgrQStatusGet(IX_ETH_ACC_PORT_TO_TX_Q_ID(portId), &txQStatus); - if((txQStatus & IX_QMGR_Q_STATUS_E_BIT_MASK) != 0) - { - /*The tx queue is empty, check whether there are buffers on the s/w queues*/ - if(ixEthAccTxSwQHighestPriorityGet(portId, &highestPriority) - !=IX_ETH_ACC_FAIL) - { - /*there are buffers on the s/w queues, submit them*/ - ixEthAccTxFromSwQ(portId, highestPriority); - - /* the queue was empty, 1 buffer is already supplied - * but is likely to be immediately transmitted and the - * hw queue is likely to be empty again, so submit - * more from the sw queues - */ - if(ixEthAccTxSwQHighestPriorityGet(portId, &highestPriority) - !=IX_ETH_ACC_FAIL) - { - ixEthAccTxFromSwQ(portId, highestPriority); - /* - * and force the buffer supplied to be placed - * on a priority queue - */ - qStatus = IX_QMGR_Q_OVERFLOW; - } - else - { - /*there are no buffers in the s/w queues, submit directly*/ - qStatus = ixEthAccQmgrTxWrite(portId, qBuffer, priority); - } - } - else - { - /*there are no buffers in the s/w queues, submit directly*/ - qStatus = ixEthAccQmgrTxWrite(portId, qBuffer, priority); - } - } - else - { - qStatus = IX_QMGR_Q_OVERFLOW; - } - } - else - { - TX_INC(portId,txUnexpectedError); - IX_ETH_ACC_FATAL_LOG( - "ixEthAccPortTxFrameSubmit:Error: wrong schedule discipline setup\n", - 0, 0, 0, 0, 0, 0); - return (IX_ETH_ACC_FAIL); - } - - if(qStatus == IX_SUCCESS ) - { - TX_STATS_INC(portId,txQOK); - return IX_ETH_ACC_SUCCESS; - } - else if(qStatus == IX_QMGR_Q_OVERFLOW) - { - TX_STATS_INC(portId,txQDelayed); - /* - * We were unable to write the buffer to the - * appropriate H/W Q, Save it in a s/w Q. - */ - IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_TAIL( - ixEthAccPortData[portId]. - ixEthAccTxData.txQ[priority], - buffer); - - qStatus = ixQMgrNotificationEnable( - IX_ETH_ACC_PORT_TO_TX_Q_ID(portId), - IX_ETH_ACC_PORT_TO_TX_Q_SOURCE(portId)); - - if (qStatus != IX_SUCCESS) - { - if (qStatus == IX_QMGR_WARNING) - { - /* notification is enabled for a queue - * which is already empty (the condition is already met) - * and there will be no more queue event to drain the sw queue - */ - TX_STATS_INC(portId,txLateNotificationEnabled); - - /* pull a buffer from the sw queue */ - if(ixEthAccTxSwQHighestPriorityGet(portId, &highestPriority) - !=IX_ETH_ACC_FAIL) - { - /*there are buffers on the s/w queues, submit from them*/ - ixEthAccTxFromSwQ(portId, highestPriority); - } - } - else - { - TX_INC(portId,txUnexpectedError); - IX_ETH_ACC_FATAL_LOG( - "ixEthAccPortTxFrameSubmit: unexpected Error: %u\n", - qStatus, 0, 0, 0, 0, 0); - } - } - } - else - { - TX_INC(portId,txUnexpectedError); - IX_ETH_ACC_FATAL_LOG( - "ixEthAccPortTxFrameSubmit: unexpected Error: %u\n", - qStatus, 0, 0, 0, 0, 0); - return (IX_ETH_ACC_FAIL); - } - - return (IX_ETH_ACC_SUCCESS); -} - - -/** - * - * @brief replenish: convert a chain of mbufs to the format - * expected by the NPE - * - */ - -IX_ETH_ACC_PUBLIC -IxEthAccStatus ixEthAccPortRxFreeReplenish(IxEthAccPortId portId, - IX_OSAL_MBUF *buffer) -{ - IX_STATUS qStatus = IX_SUCCESS; - UINT32 qBuffer; - - /* - * Check buffer is valid. - */ - -#ifndef NDEBUG - /* check parameter value */ - if (buffer == 0) - { - return (IX_ETH_ACC_FAIL); - } - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - if (!IX_ETH_ACC_IS_PORT_VALID(portId)) - { - return (IX_ETH_ACC_INVALID_PORT); - } - - /* check initialisation is done */ - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_FATAL_LOG(" ixEthAccPortRxFreeReplenish: Unavailable Eth %d: Cannot replenish Rx Free Q.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_PORT_UNINITIALIZED ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - /* check boundaries and constraints */ - if (IX_OSAL_MBUF_MLEN(buffer) < IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN) - { - return (IX_ETH_ACC_FAIL); - } -#endif - - qBuffer = ixEthAccMbufRxQPrepare(buffer); - - /* - * Add The Rx Buffer to the H/W Free buffer Q if possible - */ - qStatus = ixEthAccQmgrLockRxWrite(portId, qBuffer); - - if (qStatus == IX_SUCCESS) - { - RX_STATS_INC(portId,rxFreeRepOK); - /* - * Buffer added to h/w Q. - */ - return (IX_SUCCESS); - } - else if (qStatus == IX_QMGR_Q_OVERFLOW) - { - RX_STATS_INC(portId,rxFreeRepDelayed); - /* - * We were unable to write the buffer to the approprate H/W Q, - * Save it in a s/w Q. - */ - IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_TAIL( - ixEthAccPortData[portId].ixEthAccRxData.freeBufferList, - buffer); - - qStatus = ixQMgrNotificationEnable( - IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(portId), - IX_ETH_ACC_PORT_TO_RX_FREE_Q_SOURCE(portId)); - - if (qStatus != IX_SUCCESS) - { - if (qStatus == IX_QMGR_WARNING) - { - /* notification is enabled for a queue - * which is already empty (the condition is already met) - * and there will be no more queue event to drain the sw queue - * move an entry from the sw queue to the hw queue */ - RX_STATS_INC(portId,rxFreeLateNotificationEnabled); - ixEthAccRxFreeFromSwQ(portId); - } - else - { - RX_INC(portId,rxUnexpectedError); - IX_ETH_ACC_FATAL_LOG( - "ixEthAccRxPortFreeReplenish:Error: %u\n", - qStatus, 0, 0, 0, 0, 0); - } - } - } - else - { - RX_INC(portId,rxUnexpectedError); - IX_ETH_ACC_FATAL_LOG( - "ixEthAccRxPortFreeReplenish:Error: qStatus = %u\n", - (UINT32)qStatus, 0, 0, 0, 0, 0); - return(IX_ETH_ACC_FAIL); - } - return (IX_ETH_ACC_SUCCESS); -} - - -IX_ETH_ACC_PUBLIC -IxEthAccStatus ixEthAccTxSchedulingDisciplineSetPriv(IxEthAccPortId portId, - IxEthAccSchedulerDiscipline - sched) -{ - if (!IX_ETH_ACC_IS_PORT_VALID(portId)) - { - return (IX_ETH_ACC_INVALID_PORT); - } - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("ixEthAccTxSchedulingDisciplineSet: Unavailable Eth %d: Cannot set Tx Scheduling Discipline.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - if (sched != FIFO_PRIORITY && sched != FIFO_NO_PRIORITY) - { - return (IX_ETH_ACC_INVALID_ARG); - } - - ixEthAccPortData[portId].ixEthAccTxData.schDiscipline = sched; - return (IX_ETH_ACC_SUCCESS); -} - -IX_ETH_ACC_PUBLIC -IxEthAccStatus ixEthAccRxSchedulingDisciplineSetPriv(IxEthAccSchedulerDiscipline - sched) -{ - if (sched != FIFO_PRIORITY && sched != FIFO_NO_PRIORITY) - { - return (IX_ETH_ACC_INVALID_ARG); - } - - ixEthAccDataInfo.schDiscipline = sched; - - return (IX_ETH_ACC_SUCCESS); -} - - -/** - * @fn ixEthRxFrameProcess(IxEthAccPortId portId, IX_OSAL_MBUF *mbufPtr) - * - * @brief process incoming frame : - * - * @param @ref IxQMgrCallback IxQMgrMultiBufferCallback - * - * @return none - * - * @internal - * - */ -IX_ETH_ACC_PRIVATE BOOL -ixEthRxFrameProcess(IxEthAccPortId portId, IX_OSAL_MBUF *mbufPtr) -{ - UINT32 flags; - IxEthDBStatus result; - -#ifndef NDEBUG - /* Prudent to at least check the port is within range */ - if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS) - { - ixEthAccDataStats.unexpectedError++; - IX_ETH_ACC_FATAL_LOG( - "ixEthRxFrameProcess: Illegal port: %u\n", - (UINT32)portId, 0, 0, 0, 0, 0); - return false; - } -#endif - - /* convert fields from mbuf header */ - ixEthAccMbufFromRxQ(mbufPtr); - - /* check about any special processing for this frame */ - flags = IX_ETHACC_NE_FLAGS(mbufPtr); - if ((flags & (IX_ETHACC_NE_FILTERMASK | IX_ETHACC_NE_NEWSRCMASK)) == 0) - { - /* "best case" scenario : nothing special to do for this frame */ - return true; - } - -#ifdef CONFIG_IXP425_COMPONENT_ETHDB - /* if a new source MAC address is detected by the NPE, - * update IxEthDB with the portId and the MAC address. - */ - if ((flags & IX_ETHACC_NE_NEWSRCMASK & ixEthAccNewSrcMask) != 0) - { - result = ixEthDBFilteringDynamicEntryProvision(portId, - (IxEthDBMacAddr *) IX_ETHACC_NE_SOURCEMAC(mbufPtr)); - - if (result != IX_ETH_DB_SUCCESS && result != IX_ETH_DB_FEATURE_UNAVAILABLE) - { - if ((ixEthAccMacState[portId].portDisableState == ACTIVE) && (result != IX_ETH_DB_BUSY)) - { - RX_STATS_INC(portId, rxUnexpectedError); - IX_ETH_ACC_FATAL_LOG("ixEthRxFrameProcess: Failed to add source MAC \ - to the Learning/Filtering database\n", 0, 0, 0, 0, 0, 0); - } - else - { - /* we expect this to fail during PortDisable, as EthDB is disabled for - * that port and will refuse to learn new addresses - */ - } - } - else - { - RX_STATS_INC(portId, rxUnlearnedMacAddress); - } - } -#endif - - /* check if this frame should have been filtered - * by the NPE and take the appropriate action - */ - if (((flags & IX_ETHACC_NE_FILTERMASK) != 0) - && (ixEthAccMacState[portId].portDisableState == ACTIVE)) - { - /* If the mbuf was allocated with a small data size, or the current data pointer is not - * within the allocated data area, then the buffer is non-standard and has to be - * replenished with the minimum size only - */ - if( (IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(mbufPtr) < IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN) - || ((UINT8 *)IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(mbufPtr) > IX_OSAL_MBUF_MDATA(mbufPtr)) - || ((UINT8 *)(IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(mbufPtr) + - IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(mbufPtr)) - < IX_OSAL_MBUF_MDATA(mbufPtr)) ) - { - /* set to minimum length */ - IX_OSAL_MBUF_MLEN(mbufPtr) = IX_OSAL_MBUF_PKT_LEN(mbufPtr) = - IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN; - } - else - { - /* restore original length */ - IX_OSAL_MBUF_MLEN(mbufPtr) = IX_OSAL_MBUF_PKT_LEN(mbufPtr) = - ( IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(mbufPtr) - - (IX_OSAL_MBUF_MDATA(mbufPtr) - (UINT8 *)IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(mbufPtr)) ); - } - - /* replenish from here */ - if (ixEthAccPortRxFreeReplenish(portId, mbufPtr) != IX_ETH_ACC_SUCCESS) - { - IX_ETH_ACC_FATAL_LOG("ixEthRxFrameProcess: Failed to replenish with filtered frame\ - on port %d\n", portId, 0, 0, 0, 0, 0); - } - - RX_STATS_INC(portId, rxFiltered); - - /* indicate that frame should not be subjected to further processing */ - return false; - } - - return true; -} - - -/** - * @fn ixEthRxFrameQMCallback - * - * @brief receive callback for Frame receive Q from NPE - * - * Frames are passed one-at-a-time to the user - * - * @param @ref IxQMgrCallback - * - * @return none - * - * @internal - * - * Design note : while processing the entry X, entry X+1 is preloaded - * into memory to reduce the number of stall cycles - * - */ -void ixEthRxFrameQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId) -{ - IX_OSAL_MBUF *mbufPtr; - IX_OSAL_MBUF *nextMbufPtr; - UINT32 qEntry; - UINT32 nextQEntry; - UINT32 *qEntryPtr; - UINT32 portId; - UINT32 destPortId; - UINT32 npeId; - UINT32 rxQReadStatus; - - /* - * Design note : entries are read in a buffer, This buffer contains - * an extra zeroed entry so the loop will - * always terminate on a null entry, whatever the result of Burst read is. - */ - UINT32 rxQEntry[IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK + 1]; - - /* - * Indication of the number of times the callback is used. - */ - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.rxCallbackCounter); - - do - { - /* - * Indication of the number of times the queue is drained - */ - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.rxCallbackBurstRead); - - /* ensure the last entry of the array contains a zeroed value */ - qEntryPtr = rxQEntry; - qEntryPtr[IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK] = 0; - - rxQReadStatus = ixQMgrQBurstRead(qId, - IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK, - qEntryPtr); - -#ifndef NDEBUG - if ((rxQReadStatus != IX_QMGR_Q_UNDERFLOW) - && (rxQReadStatus != IX_SUCCESS)) - { - ixEthAccDataStats.unexpectedError++; - /*major error*/ - IX_ETH_ACC_FATAL_LOG( - "ixEthRxFrameQMCallback:Error: %u\n", - (UINT32)rxQReadStatus, 0, 0, 0, 0, 0); - return; - } -#endif - - /* convert and preload the next entry - * (the conversion function takes care about null pointers which - * are used to mark the end of the loop) - */ - nextQEntry = *qEntryPtr; - nextMbufPtr = ixEthAccEntryFromQConvert(nextQEntry, - IX_ETHNPE_QM_Q_RXENET_ADDR_MASK); - - while(nextQEntry != 0) - { - /* get the next entry */ - qEntry = nextQEntry; - mbufPtr = nextMbufPtr; - -#ifndef NDEBUG - if (mbufPtr == NULL) - { - ixEthAccDataStats.unexpectedError++; - IX_ETH_ACC_FATAL_LOG( - "ixEthRxFrameQMCallback: Null Mbuf Ptr\n", - 0, 0, 0, 0, 0, 0); - return; - } -#endif - - /* convert the next entry - * (the conversion function takes care about null pointers which - * are used to mark the end of the loop) - */ - nextQEntry = *(++qEntryPtr); - nextMbufPtr = ixEthAccEntryFromQConvert(nextQEntry, - IX_ETHNPE_QM_Q_RXENET_ADDR_MASK); - - /* - * Get Port and Npe ID from message. - */ - npeId = ((IX_ETHNPE_QM_Q_RXENET_NPEID_MASK & - qEntry) >> IX_ETHNPE_QM_Q_FIELD_NPEID_R); - portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId); - - /* process frame, check the return code and skip the remaining of - * the loop if the frame is to be filtered out - */ - if (ixEthRxFrameProcess(portId, mbufPtr)) - { - /* destination portId for this packet */ - destPortId = IX_ETHACC_NE_DESTPORTID(mbufPtr); - - if (destPortId != IX_ETH_DB_UNKNOWN_PORT) - { - destPortId = IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(destPortId); - } - - /* test if QoS is enabled in ethAcc - */ - if (ixEthAccDataInfo.schDiscipline == FIFO_PRIORITY) - { - /* check if there is a higher priority queue - * which may require processing and then process it. - */ - if (ixEthAccDataInfo.higherPriorityQueue[qId] < IX_QMGR_MAX_NUM_QUEUES) - { - ixEthRxFrameQMCallback(ixEthAccDataInfo.higherPriorityQueue[qId], - callbackId); - } - } - - /* - * increment priority stats - */ - RX_STATS_INC(portId,rxPriority[IX_ETHACC_NE_QOS(mbufPtr)]); - - /* - * increment callback count stats - */ - RX_STATS_INC(portId,rxFrameClientCallback); - - /* - * Call user level callback. - */ - ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn( - ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag, - mbufPtr, - destPortId); - } - } - } while (rxQReadStatus == IX_SUCCESS); -} - -/** - * @fn ixEthRxMultiBufferQMCallback - * - * @brief receive callback for Frame receive Q from NPE - * - * Frames are passed as an array to the user - * - * @param @ref IxQMgrCallback - * - * @return none - * - * @internal - * - * Design note : while processing the entry X, entry X+1 is preloaded - * into memory to reduce the number of stall cycles - * - */ -void ixEthRxMultiBufferQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId) -{ - IX_OSAL_MBUF *mbufPtr; - IX_OSAL_MBUF *nextMbufPtr; - UINT32 qEntry; - UINT32 nextQEntry; - UINT32 *qEntryPtr; - UINT32 portId; - UINT32 npeId; - UINT32 rxQReadStatus; - /* - * Design note : entries are read in a static buffer, This buffer contains - * an extra zeroed entry so the loop will - * always terminate on a null entry, whatever the result of Burst read is. - */ - static UINT32 rxQEntry[IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK + 1]; - static IX_OSAL_MBUF *rxMbufPortArray[IX_ETH_ACC_NUMBER_OF_PORTS][IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK + 1]; - IX_OSAL_MBUF **rxMbufPtr[IX_ETH_ACC_NUMBER_OF_PORTS]; - - for (portId = 0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) - { - rxMbufPtr[portId] = rxMbufPortArray[portId]; - } - - /* - * Indication of the number of times the callback is used. - */ - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.rxCallbackCounter); - - do - { - /* - * Indication of the number of times the queue is drained - */ - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.rxCallbackBurstRead); - - /* ensure the last entry of the array contains a zeroed value */ - qEntryPtr = rxQEntry; - qEntryPtr[IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK] = 0; - - rxQReadStatus = ixQMgrQBurstRead(qId, - IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK, - qEntryPtr); - -#ifndef NDEBUG - if ((rxQReadStatus != IX_QMGR_Q_UNDERFLOW) - && (rxQReadStatus != IX_SUCCESS)) - { - ixEthAccDataStats.unexpectedError++; - /*major error*/ - IX_ETH_ACC_FATAL_LOG( - "ixEthRxFrameMultiBufferQMCallback:Error: %u\n", - (UINT32)rxQReadStatus, 0, 0, 0, 0, 0); - return; - } -#endif - - /* convert and preload the next entry - * (the conversion function takes care about null pointers which - * are used to mark the end of the loop) - */ - nextQEntry = *qEntryPtr; - nextMbufPtr = ixEthAccEntryFromQConvert(nextQEntry, - IX_ETHNPE_QM_Q_RXENET_ADDR_MASK); - - while(nextQEntry != 0) - { - /* get the next entry */ - qEntry = nextQEntry; - mbufPtr = nextMbufPtr; - -#ifndef NDEBUG - if (mbufPtr == NULL) - { - ixEthAccDataStats.unexpectedError++; - IX_ETH_ACC_FATAL_LOG( - "ixEthRxFrameMultiBufferQMCallback:Error: Null Mbuf Ptr\n", - 0, 0, 0, 0, 0, 0); - return; - } -#endif - - /* convert the next entry - * (the conversion function takes care about null pointers which - * are used to mark the end of the loop) - */ - nextQEntry = *(++qEntryPtr); - nextMbufPtr = ixEthAccEntryFromQConvert(nextQEntry, - IX_ETHNPE_QM_Q_RXENET_ADDR_MASK); - - /* - * Get Port and Npe ID from message. - */ - npeId = ((IX_ETHNPE_QM_Q_RXENET_NPEID_MASK & - qEntry) >> - IX_ETHNPE_QM_Q_FIELD_NPEID_R); - portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId); - - /* skip the remaining of the loop if the frame is - * to be filtered out - */ - if (ixEthRxFrameProcess(portId, mbufPtr)) - { - /* store a mbuf pointer in an array */ - *rxMbufPtr[portId]++ = mbufPtr; - - /* - * increment priority stats - */ - RX_STATS_INC(portId,rxPriority[IX_ETHACC_NE_QOS(mbufPtr)]); - } - - /* test for QoS enabled in ethAcc */ - if (ixEthAccDataInfo.schDiscipline == FIFO_PRIORITY) - { - /* check if there is a higher priority queue - * which may require processing and then process it. - */ - if (ixEthAccDataInfo.higherPriorityQueue[qId] < IX_QMGR_MAX_NUM_QUEUES) - { - ixEthRxMultiBufferQMCallback(ixEthAccDataInfo.higherPriorityQueue[qId], - callbackId); - } - } - } - - /* check if any of the the arrays contains any entry */ - for (portId = 0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) - { - if (rxMbufPtr[portId] != rxMbufPortArray[portId]) - { - /* add a last NULL pointer at the end of the - * array of mbuf pointers - */ - *rxMbufPtr[portId] = NULL; - - /* - * increment callback count stats - */ - RX_STATS_INC(portId,rxFrameClientCallback); - - /* - * Call user level callback with an array of - * buffers (NULL terminated) - */ - ixEthAccPortData[portId].ixEthAccRxData. - rxMultiBufferCallbackFn( - ixEthAccPortData[portId].ixEthAccRxData. - rxMultiBufferCallbackTag, - rxMbufPortArray[portId]); - - /* reset the buffer pointer to the beginning of - * the array - */ - rxMbufPtr[portId] = rxMbufPortArray[portId]; - } - } - - } while (rxQReadStatus == IX_SUCCESS); -} - - -/** - * @brief rxFree low event handler - * - */ -void ixEthRxFreeQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId) -{ - IxEthAccPortId portId = (IxEthAccPortId) callbackId; - int lockVal; - UINT32 maxQWritesToPerform = IX_ETH_ACC_MAX_RX_FREE_BUFFERS_LOAD; - IX_STATUS qStatus = IX_SUCCESS; - - /* - * We have reached a low threshold on one of the Rx Free Qs - */ - - /*note that due to the fact that we are working off an Empty threshold, this callback - need only write a single entry to the Rx Free queue in order to re-arm the notification - */ - - RX_STATS_INC(portId,rxFreeLowCallback); - - /* - * Get buffers from approprite S/W Rx freeBufferList Q. - */ - -#ifndef NDEBUG - if (!IX_ETH_ACC_IS_PORT_VALID(portId)) - { - ixEthAccDataStats.unexpectedError++; - IX_ETH_ACC_FATAL_LOG( - "ixEthRxFreeQMCallback:Error: Invalid Port 0x%08X\n", - portId, 0, 0, 0, 0, 0); - return; - } -#endif - IX_ETH_ACC_DATA_PLANE_LOCK(lockVal); - if (IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(ixEthAccPortData[portId]. - ixEthAccRxData.freeBufferList)) - { - /* - * Turn off Q callback notification for Q in Question. - */ - qStatus = ixQMgrNotificationDisable( - IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(portId)); - - - IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); - - if (qStatus != IX_SUCCESS) - { - RX_INC(portId,rxUnexpectedError); - IX_ETH_ACC_FATAL_LOG( - "ixEthRxFreeQMCallback:Error: unexpected QM status 0x%08X\n", - qStatus, 0, 0, 0, 0, 0); - return; - } - } - else - { - IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); - /* - * Load the H/W Q with buffers from the s/w Q. - */ - - do - { - /* - * Consume Q entries. - Note Q contains Physical addresss, - * and have already been flushed to memory, - * And endianess converted if required. - */ - if (ixEthAccRxFreeFromSwQ(portId) != IX_SUCCESS) - { - /* - * No more entries in s/w Q. - * Turn off Q callback indication - */ - - IX_ETH_ACC_DATA_PLANE_LOCK(lockVal); - if (IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(ixEthAccPortData[portId]. - ixEthAccRxData.freeBufferList)) - { - qStatus = ixQMgrNotificationDisable( - IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(portId)); - } - IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); - break; - } - } - while (--maxQWritesToPerform); - } -} -/** - * @fn Tx queue low event handler - * - */ -void -ixEthTxFrameQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId) -{ - IxEthAccPortId portId = (IxEthAccPortId) callbackId; - int lockVal; - UINT32 maxQWritesToPerform = IX_ETH_ACC_MAX_TX_FRAME_TX_CONSUME_PER_CALLBACK; - IX_STATUS qStatus = IX_SUCCESS; - IxEthAccTxPriority highestPriority; - - - /* - * We have reached a low threshold on the Tx Q, and are being asked to - * supply a buffer for transmission from our S/W TX queues - */ - TX_STATS_INC(portId,txLowThreshCallback); - - /* - * Get buffers from approprite Q. - */ - -#ifndef NDEBUG - if (!IX_ETH_ACC_IS_PORT_VALID(portId)) - { - ixEthAccDataStats.unexpectedError++; - IX_ETH_ACC_FATAL_LOG( - "ixEthTxFrameQMCallback:Error: Invalid Port 0x%08X\n", - portId, 0, 0, 0, 0, 0); - return; - } -#endif - - do - { - /* - * Consume Q entries. - Note Q contains Physical addresss, - * and have already been flushed to memory, - * and endianess already sone if required. - */ - - IX_ETH_ACC_DATA_PLANE_LOCK(lockVal); - - if(ixEthAccTxSwQHighestPriorityGet(portId, &highestPriority) == - IX_ETH_ACC_FAIL) - { - /* - * No more entries in s/w Q. - * Turn off Q callback indication - */ - qStatus = ixQMgrNotificationDisable( - IX_ETH_ACC_PORT_TO_TX_Q_ID(portId)); - - IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); - - if (qStatus != IX_SUCCESS) - { - ixEthAccDataStats.unexpectedError++; - IX_ETH_ACC_FATAL_LOG( - "ixEthTxFrameQMCallback:Error: unexpected QM status 0x%08X\n", - qStatus, 0, 0, 0, 0, 0); - } - - return; - } - else - { - IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); - if (ixEthAccTxFromSwQ(portId,highestPriority)!=IX_SUCCESS) - { - /* nothing left in the sw queue or the hw queues are - * full. There is no point to continue to drain the - * sw queues - */ - return; - } - } - } - while (--maxQWritesToPerform); -} - -/** - * @brief TxDone event handler - * - * Design note : while processing the entry X, entry X+1 is preloaded - * into memory to reduce the number of stall cycles - * - */ - -void -ixEthTxFrameDoneQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId) -{ - IX_OSAL_MBUF *mbufPtr; - UINT32 qEntry; - UINT32 *qEntryPtr; - UINT32 txDoneQReadStatus; - UINT32 portId; - UINT32 npeId; - - /* - * Design note : entries are read in a static buffer, This buffer contains - * an extra entyry (which is zeroed by the compiler), so the loop will - * always terminate on a null entry, whatever the result of Burst read is. - */ - static UINT32 txDoneQEntry[IX_ETH_ACC_MAX_TX_FRAME_DONE_CONSUME_PER_CALLBACK + 1]; - - /* - * Indication that Tx frames have been transmitted from the NPE. - */ - - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.txDoneCallbackCounter); - - do{ - qEntryPtr = txDoneQEntry; - txDoneQReadStatus = ixQMgrQBurstRead(IX_ETH_ACC_TX_FRAME_DONE_ETH_Q, - IX_ETH_ACC_MAX_TX_FRAME_DONE_CONSUME_PER_CALLBACK, - qEntryPtr); - -#ifndef NDEBUG - if (txDoneQReadStatus != IX_QMGR_Q_UNDERFLOW - && (txDoneQReadStatus != IX_SUCCESS)) - { - /*major error*/ - ixEthAccDataStats.unexpectedError++; - IX_ETH_ACC_FATAL_LOG( - "ixEthTxFrameDoneQMCallback:Error: %u\n", - (UINT32)txDoneQReadStatus, 0, 0, 0, 0, 0); - return; - } -#endif - - qEntry = *qEntryPtr; - - while(qEntry != 0) - { - mbufPtr = ixEthAccEntryFromQConvert(qEntry, - IX_ETHNPE_QM_Q_TXENET_ADDR_MASK); - -#ifndef NDEBUG - if (mbufPtr == NULL) - { - ixEthAccDataStats.unexpectedError++; - IX_ETH_ACC_FATAL_LOG( - "ixEthTxFrameDoneQMCallback:Error: Null Mbuf Ptr\n", - 0, 0, 0, 0, 0, 0); - return; - } -#endif - - /* endianness conversions and stats updates */ - ixEthAccMbufFromTxQ(mbufPtr); - - /* - * Get NPE id from message, then convert to portId. - */ - npeId = ((IX_ETHNPE_QM_Q_TXENETDONE_NPEID_MASK & - qEntry) >> - IX_ETHNPE_QM_Q_FIELD_NPEID_R); - portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId); - -#ifndef NDEBUG - /* Prudent to at least check the port is within range */ - if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS) - { - ixEthAccDataStats.unexpectedError++; - IX_ETH_ACC_FATAL_LOG( - "ixEthTxFrameDoneQMCallback: Illegal port: %u\n", - (UINT32)portId, 0, 0, 0, 0, 0); - return; - } -#endif - - TX_STATS_INC(portId,txDoneClientCallback); - - /* - * Call user level callback. - */ - ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn( - ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag, - mbufPtr); - - /* move to next queue entry */ - qEntry = *(++qEntryPtr); - - } - } while( txDoneQReadStatus == IX_SUCCESS ); -} - -IX_ETH_ACC_PUBLIC -void ixEthAccDataPlaneShow(void) -{ - UINT32 numTx0Entries; - UINT32 numTx1Entries; - UINT32 numTxDoneEntries; - UINT32 numRxEntries; - UINT32 numRxFree0Entries; - UINT32 numRxFree1Entries; - UINT32 portId; -#ifdef __ixp46X - UINT32 numTx2Entries; - UINT32 numRxFree2Entries; -#endif -#ifndef NDEBUG - UINT32 priority; - UINT32 numBuffersInRx=0; - UINT32 numBuffersInTx=0; - UINT32 numBuffersInSwQ=0; - UINT32 totalBuffers=0; - UINT32 rxFreeCallbackCounter = 0; - UINT32 txCallbackCounter = 0; -#endif - UINT32 key; - - /* snapshot of stats */ - IxEthAccTxDataStats tx[IX_ETH_ACC_NUMBER_OF_PORTS]; - IxEthAccRxDataStats rx[IX_ETH_ACC_NUMBER_OF_PORTS]; - IxEthAccDataPlaneStats stats; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return; - } - - /* get a reliable snapshot */ - key = ixOsalIrqLock(); - - numTx0Entries = 0; - ixQMgrQNumEntriesGet(IX_ETH_ACC_TX_FRAME_ENET0_Q, &numTx0Entries); - numTx1Entries = 0; - ixQMgrQNumEntriesGet(IX_ETH_ACC_TX_FRAME_ENET1_Q, &numTx1Entries); - numTxDoneEntries = 0; - ixQMgrQNumEntriesGet( IX_ETH_ACC_TX_FRAME_DONE_ETH_Q, &numTxDoneEntries); - numRxEntries = 0; - ixEthAccQMgrRxQEntryGet(&numRxEntries); - numRxFree0Entries = 0; - ixQMgrQNumEntriesGet(IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q, &numRxFree0Entries); - numRxFree1Entries = 0; - ixQMgrQNumEntriesGet(IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q, &numRxFree1Entries); - -#ifdef __ixp46X - numTx2Entries = 0; - ixQMgrQNumEntriesGet(IX_ETH_ACC_TX_FRAME_ENET2_Q, &numTx2Entries); - numRxFree2Entries = 0; - ixQMgrQNumEntriesGet(IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q, &numRxFree2Entries); -#endif - - for(portId=IX_ETH_PORT_1; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) - { - memcpy(&tx[portId], - &ixEthAccPortData[portId].ixEthAccTxData.stats, - sizeof(tx[portId])); - memcpy(&rx[portId], - &ixEthAccPortData[portId].ixEthAccRxData.stats, - sizeof(rx[portId])); - } - memcpy(&stats, &ixEthAccDataStats, sizeof(stats)); - - ixOsalIrqUnlock(key); - -#ifdef NDEBUG - printf("Detailed statistics collection not supported in this load\n"); -#endif - - /* print snapshot */ - for(portId=0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) - { - /* If not IXP42X A0 stepping, proceed to check for existence of coprocessors */ - if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != - (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) - || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) - { - if ((IX_ETH_PORT_1 == portId) && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) == - IX_FEATURE_CTRL_COMPONENT_DISABLED)) - { - continue ; - } - if ((IX_ETH_PORT_2 == portId) && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) == - IX_FEATURE_CTRL_COMPONENT_DISABLED)) - { - continue ; - } - if ((IX_ETH_PORT_3 == portId) && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA_ETH) == - IX_FEATURE_CTRL_COMPONENT_DISABLED)) - { - continue ; - } - } - - printf("PORT %u --------------------------------\n", - portId); -#ifndef NDEBUG - printf("Tx Done Frames : %u\n", - tx[portId].txDoneClientCallback + - tx[portId].txDoneSwQDuringDisable + - tx[portId].txDoneDuringDisable); - printf("Tx Frames : %u\n", - tx[portId].txQOK + tx[portId].txQDelayed); - printf("Tx H/W Q Added OK : %u\n", - tx[portId].txQOK); - printf("Tx H/W Q Delayed : %u\n", - tx[portId].txQDelayed); - printf("Tx From S/W Q Added OK : %u\n", - tx[portId].txFromSwQOK); - printf("Tx From S/W Q Delayed : %u\n", - tx[portId].txFromSwQDelayed); - printf("Tx Overflow : %u\n", - tx[portId].txOverflow); - printf("Tx Mutual Lock : %u\n", - tx[portId].txLock); - printf("Tx Late Ntf Enabled : %u\n", - tx[portId].txLateNotificationEnabled); - printf("Tx Low Thresh CB : %u\n", - tx[portId].txLowThreshCallback); - printf("Tx Done from H/W Q (Disable) : %u\n", - tx[portId].txDoneDuringDisable); - printf("Tx Done from S/W Q (Disable) : %u\n", - tx[portId].txDoneSwQDuringDisable); - for (priority = IX_ETH_ACC_TX_PRIORITY_0; - priority <= IX_ETH_ACC_TX_PRIORITY_7; - priority++) - { - if (tx[portId].txPriority[priority]) - { - printf("Tx Priority %u : %u\n", - priority, - tx[portId].txPriority[priority]); - } - } -#endif - printf("Tx unexpected errors : %u (should be 0)\n", - tx[portId].txUnexpectedError); - -#ifndef NDEBUG - printf("Rx Frames : %u\n", - rx[portId].rxFrameClientCallback + - rx[portId].rxSwQDuringDisable+ - rx[portId].rxDuringDisable); - printf("Rx Free Replenish : %u\n", - rx[portId].rxFreeRepOK + rx[portId].rxFreeRepDelayed); - printf("Rx Free H/W Q Added OK : %u\n", - rx[portId].rxFreeRepOK); - printf("Rx Free H/W Q Delayed : %u\n", - rx[portId].rxFreeRepDelayed); - printf("Rx Free From S/W Q Added OK : %u\n", - rx[portId].rxFreeRepFromSwQOK); - printf("Rx Free From S/W Q Delayed : %u\n", - rx[portId].rxFreeRepFromSwQDelayed); - printf("Rx Free Overflow : %u\n", - rx[portId].rxFreeOverflow); - printf("Rx Free Mutual Lock : %u\n", - rx[portId].rxFreeLock); - printf("Rx Free Late Ntf Enabled : %u\n", - rx[portId].rxFreeLateNotificationEnabled); - printf("Rx Free Low CB : %u\n", - rx[portId].rxFreeLowCallback); - printf("Rx From H/W Q (Disable) : %u\n", - rx[portId].rxDuringDisable); - printf("Rx From S/W Q (Disable) : %u\n", - rx[portId].rxSwQDuringDisable); - printf("Rx unlearned Mac Address : %u\n", - rx[portId].rxUnlearnedMacAddress); - printf("Rx Filtered (Rx => RxFree) : %u\n", - rx[portId].rxFiltered); - - for (priority = IX_ETH_ACC_TX_PRIORITY_0; - priority <= IX_ETH_ACC_TX_PRIORITY_7; - priority++) - { - if (rx[portId].rxPriority[priority]) - { - printf("Rx Priority %u : %u\n", - priority, - rx[portId].rxPriority[priority]); - } - } -#endif - printf("Rx unexpected errors : %u (should be 0)\n", - rx[portId].rxUnexpectedError); - -#ifndef NDEBUG - numBuffersInTx = tx[portId].txQOK + - tx[portId].txQDelayed - - tx[portId].txDoneClientCallback - - tx[portId].txDoneSwQDuringDisable - - tx[portId].txDoneDuringDisable; - - printf("# Tx Buffers currently for transmission : %u\n", - numBuffersInTx); - - numBuffersInRx = rx[portId].rxFreeRepOK + - rx[portId].rxFreeRepDelayed - - rx[portId].rxFrameClientCallback - - rx[portId].rxSwQDuringDisable - - rx[portId].rxDuringDisable; - - printf("# Rx Buffers currently for reception : %u\n", - numBuffersInRx); - - totalBuffers += numBuffersInRx + numBuffersInTx; -#endif - } - - printf("---------------------------------------\n"); - -#ifndef NDEBUG - printf("\n"); - printf("Mbufs :\n"); - printf("Tx Unchained mbufs : %u\n", - stats.unchainedTxMBufs); - printf("Tx Chained bufs : %u\n", - stats.chainedTxMBufs); - printf("TxDone Unchained mbufs : %u\n", - stats.unchainedTxDoneMBufs); - printf("TxDone Chained bufs : %u\n", - stats.chainedTxDoneMBufs); - printf("RxFree Unchained mbufs : %u\n", - stats.unchainedRxFreeMBufs); - printf("RxFree Chained bufs : %u\n", - stats.chainedRxFreeMBufs); - printf("Rx Unchained mbufs : %u\n", - stats.unchainedRxMBufs); - printf("Rx Chained bufs : %u\n", - stats.chainedRxMBufs); - - printf("\n"); - printf("Software queue usage :\n"); - printf("Buffers added to S/W Q : %u\n", - stats.addToSwQ); - printf("Buffers removed from S/W Q : %u\n", - stats.removeFromSwQ); - - printf("\n"); - printf("Hardware queues callbacks :\n"); - - for(portId=0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) - { - rxFreeCallbackCounter += rx[portId].rxFreeLowCallback; - txCallbackCounter += tx[portId].txLowThreshCallback; - } - printf("Tx Done QM Callback invoked : %u\n", - stats.txDoneCallbackCounter); - printf("Tx QM Callback invoked : %u\n", - txCallbackCounter); - printf("Rx QM Callback invoked : %u\n", - stats.rxCallbackCounter); - printf("Rx QM Callback burst read : %u\n", - stats.rxCallbackBurstRead); - printf("Rx Free QM Callback invoked : %u\n", - rxFreeCallbackCounter); -#endif - printf("Unexpected errors in CB : %u (should be 0)\n", - stats.unexpectedError); - printf("\n"); - - printf("Hardware queues levels :\n"); - printf("Transmit Port 1 Q : %u \n",numTx0Entries); - printf("Transmit Port 2 Q : %u \n",numTx1Entries); -#ifdef __ixp46X - printf("Transmit Port 3 Q : %u \n",numTx2Entries); -#endif - printf("Transmit Done Q : %u \n",numTxDoneEntries); - printf("Receive Q : %u \n",numRxEntries); - printf("Receive Free Port 1 Q : %u \n",numRxFree0Entries); - printf("Receive Free Port 2 Q : %u \n",numRxFree1Entries); -#ifdef __ixp46X - printf("Receive Free Port 3 Q : %u \n",numRxFree2Entries); -#endif - -#ifndef NDEBUG - printf("\n"); - printf("# Total Buffers accounted for : %u\n", - totalBuffers); - - numBuffersInSwQ = ixEthAccDataStats.addToSwQ - - ixEthAccDataStats.removeFromSwQ; - - printf(" Buffers in S/W Qs : %u\n", - numBuffersInSwQ); - printf(" Buffers in H/W Qs or NPEs : %u\n", - totalBuffers - numBuffersInSwQ); -#endif - - printf("Rx QoS Discipline : %s\n", - (ixEthAccDataInfo.schDiscipline == - FIFO_PRIORITY ) ? "Enabled" : "Disabled"); - - for(portId=0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) - { - printf("Tx QoS Discipline port %u : %s\n", - portId, - (ixEthAccPortData[portId].ixEthAccTxData.schDiscipline == - FIFO_PRIORITY ) ? "Enabled" : "Disabled"); - } - printf("\n"); -} - - - - - diff --git a/drivers/net/npe/IxEthAccMac.c b/drivers/net/npe/IxEthAccMac.c deleted file mode 100644 index 65113448d2..0000000000 --- a/drivers/net/npe/IxEthAccMac.c +++ /dev/null @@ -1,2617 +0,0 @@ -/** - * @file IxEthAccMac.c - * - * @author Intel Corporation - * @date - * - * @brief MAC control functions - * - * Design Notes: - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxOsal.h" -#include "IxNpeMh.h" -#ifdef CONFIG_IXP425_COMPONENT_ETHDB -#include "IxEthDB.h" -#endif -#include "IxEthDBPortDefs.h" -#include "IxEthNpe.h" -#include "IxEthAcc.h" -#include "IxEthAccDataPlane_p.h" -#include "IxEthAcc_p.h" -#include "IxEthAccMac_p.h" - -/* Maximum number of retries during ixEthAccPortDisable, which - * is approximately 10 seconds -*/ -#define IX_ETH_ACC_MAX_RETRY 500 - -/* Maximum number of retries during ixEthAccPortDisable when expecting - * timeout - */ -#define IX_ETH_ACC_MAX_RETRY_TIMEOUT 5 - -#define IX_ETH_ACC_VALIDATE_PORT_ID(portId) \ - do \ - { \ - if(!IX_ETH_ACC_IS_PORT_VALID(portId)) \ - { \ - return IX_ETH_ACC_INVALID_PORT; \ - } \ - } while(0) - -PUBLIC IxEthAccMacState ixEthAccMacState[IX_ETH_ACC_NUMBER_OF_PORTS]; - -PRIVATE UINT32 ixEthAccMacBase[IX_ETH_ACC_NUMBER_OF_PORTS]; - -/*Forward function declarations*/ -PRIVATE void -ixEthAccPortDisableRx (IxEthAccPortId portId, - IX_OSAL_MBUF * mBufPtr, - BOOL useMultiBufferCallback); - -PRIVATE void -ixEthAccPortDisableRxAndReplenish (IxEthAccPortId portId, - IX_OSAL_MBUF * mBufPtr, - BOOL useMultiBufferCallback); - -PRIVATE void -ixEthAccPortDisableTxDone (UINT32 cbTag, - IX_OSAL_MBUF *mbuf); - -PRIVATE void -ixEthAccPortDisableTxDoneAndSubmit (UINT32 cbTag, - IX_OSAL_MBUF *mbuf); - -PRIVATE void -ixEthAccPortDisableRxCallback (UINT32 cbTag, - IX_OSAL_MBUF * mBufPtr, - UINT32 learnedPortId); - -PRIVATE void -ixEthAccPortDisableMultiBufferRxCallback (UINT32 cbTag, - IX_OSAL_MBUF **mBufPtr); - -PRIVATE IxEthAccStatus -ixEthAccPortDisableTryTransmit(UINT32 portId); - -PRIVATE IxEthAccStatus -ixEthAccPortDisableTryReplenish(UINT32 portId); - -PRIVATE IxEthAccStatus -ixEthAccPortMulticastMacAddressGet (IxEthAccPortId portId, - IxEthAccMacAddr *macAddr); - -PRIVATE IxEthAccStatus -ixEthAccPortMulticastMacFilterGet (IxEthAccPortId portId, - IxEthAccMacAddr *macAddr); - -PRIVATE void -ixEthAccMacNpeStatsMessageCallback (IxNpeMhNpeId npeId, - IxNpeMhMessage msg); - -PRIVATE void -ixEthAccMacNpeStatsResetMessageCallback (IxNpeMhNpeId npeId, - IxNpeMhMessage msg); - -PRIVATE void -ixEthAccNpeLoopbackMessageCallback (IxNpeMhNpeId npeId, - IxNpeMhMessage msg); - -PRIVATE void -ixEthAccMulticastAddressSet(IxEthAccPortId portId); - -PRIVATE BOOL -ixEthAccMacEqual(IxEthAccMacAddr *macAddr1, - IxEthAccMacAddr *macAddr2); - -PRIVATE void -ixEthAccMacPrint(IxEthAccMacAddr *m); - -PRIVATE void -ixEthAccMacStateUpdate(IxEthAccPortId portId); - -IxEthAccStatus -ixEthAccMacMemInit(void) -{ - ixEthAccMacBase[IX_ETH_PORT_1] = - (UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_0_BASE, - IX_OSAL_IXP400_ETHA_MAP_SIZE); - ixEthAccMacBase[IX_ETH_PORT_2] = - (UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_1_BASE, - IX_OSAL_IXP400_ETHB_MAP_SIZE); -#ifdef __ixp46X - ixEthAccMacBase[IX_ETH_PORT_3] = - (UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_2_BASE, - IX_OSAL_IXP400_ETH_NPEA_MAP_SIZE); - if (ixEthAccMacBase[IX_ETH_PORT_3] == 0) - { - ixOsalLog(IX_OSAL_LOG_LVL_FATAL, - IX_OSAL_LOG_DEV_STDOUT, - "EthAcc: Could not map MAC I/O memory\n", - 0, 0, 0, 0, 0 ,0); - - return IX_ETH_ACC_FAIL; - } -#endif - - if (ixEthAccMacBase[IX_ETH_PORT_1] == 0 - || ixEthAccMacBase[IX_ETH_PORT_2] == 0) - { - ixOsalLog(IX_OSAL_LOG_LVL_FATAL, - IX_OSAL_LOG_DEV_STDOUT, - "EthAcc: Could not map MAC I/O memory\n", - 0, 0, 0, 0, 0 ,0); - - return IX_ETH_ACC_FAIL; - } - - return IX_ETH_ACC_SUCCESS; -} - -void -ixEthAccMacUnload(void) -{ - IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_1]); - IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_2]); -#ifdef __ixp46X - IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_3]); - ixEthAccMacBase[IX_ETH_PORT_3] = 0; -#endif - ixEthAccMacBase[IX_ETH_PORT_2] = 0; - ixEthAccMacBase[IX_ETH_PORT_1] = 0; -} - -IxEthAccStatus -ixEthAccPortEnablePriv(IxEthAccPortId portId) -{ - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable port.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - printf("EthAcc: (Mac) cannot enable port %d, port not initialized\n", portId); - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - if (ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn == NULL) - { - /* TxDone callback not registered */ - printf("EthAcc: (Mac) cannot enable port %d, TxDone callback not registered\n", portId); - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - if ((ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn == NULL) - && (ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn == NULL)) - { - /* Receive callback not registered */ - printf("EthAcc: (Mac) cannot enable port %d, Rx callback not registered\n", portId); - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - if(!ixEthAccMacState[portId].initDone) - { - printf("EthAcc: (Mac) cannot enable port %d, MAC address not set\n", portId); - return (IX_ETH_ACC_MAC_UNINITIALIZED); - } - - /* if the state is being set to what it is already at, do nothing*/ - if (ixEthAccMacState[portId].enabled) - { - return IX_ETH_ACC_SUCCESS; - } - -#ifdef CONFIG_IXP425_COMPONENT_ETHDB - /* enable ethernet database for this port */ - if (ixEthDBPortEnable(portId) != IX_ETH_DB_SUCCESS) - { - printf("EthAcc: (Mac) cannot enable port %d, EthDB failure\n", portId); - return IX_ETH_ACC_FAIL; - } -#endif - - /* set the MAC core registers */ - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_TX_CNTRL2, - IX_ETH_ACC_TX_CNTRL2_RETRIES_MASK); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RANDOM_SEED, - IX_ETH_ACC_RANDOM_SEED_DEFAULT); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_THRESH_P_EMPTY, - IX_ETH_ACC_MAC_THRESH_P_EMPTY_DEFAULT); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_THRESH_P_FULL, - IX_ETH_ACC_MAC_THRESH_P_FULL_DEFAULT); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_TX_DEFER, - IX_ETH_ACC_MAC_TX_DEFER_DEFAULT); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_TX_TWO_DEFER_1, - IX_ETH_ACC_MAC_TX_TWO_DEFER_1_DEFAULT); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_TX_TWO_DEFER_2, - IX_ETH_ACC_MAC_TX_TWO_DEFER_2_DEFAULT); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_SLOT_TIME, - IX_ETH_ACC_MAC_SLOT_TIME_DEFAULT); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_INT_CLK_THRESH, - IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_BUF_SIZE_TX, - IX_ETH_ACC_MAC_BUF_SIZE_TX_DEFAULT); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_TX_CNTRL1, - IX_ETH_ACC_TX_CNTRL1_DEFAULT); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - IX_ETH_ACC_RX_CNTRL1_DEFAULT); - - /* set the global state */ - ixEthAccMacState[portId].portDisableState = ACTIVE; - ixEthAccMacState[portId].enabled = true; - - /* rewrite the setup (including mac filtering) depending - * on current options - */ - ixEthAccMacStateUpdate(portId); - - return IX_ETH_ACC_SUCCESS; -} - -/* - * PortDisable local variables. They contain the intermediate steps - * while the port is being disabled and the buffers being drained out - * of the NPE. - */ -typedef void (*IxEthAccPortDisableRx)(IxEthAccPortId portId, - IX_OSAL_MBUF * mBufPtr, - BOOL useMultiBufferCallback); -static IxEthAccPortRxCallback -ixEthAccPortDisableFn[IX_ETH_ACC_NUMBER_OF_PORTS]; -static IxEthAccPortMultiBufferRxCallback -ixEthAccPortDisableMultiBufferFn[IX_ETH_ACC_NUMBER_OF_PORTS]; -static IxEthAccPortDisableRx -ixEthAccPortDisableRxTable[IX_ETH_ACC_NUMBER_OF_PORTS]; -static UINT32 -ixEthAccPortDisableCbTag[IX_ETH_ACC_NUMBER_OF_PORTS]; -static UINT32 -ixEthAccPortDisableMultiBufferCbTag[IX_ETH_ACC_NUMBER_OF_PORTS]; - -static IxEthAccPortTxDoneCallback -ixEthAccPortDisableTxDoneFn[IX_ETH_ACC_NUMBER_OF_PORTS]; -static UINT32 -ixEthAccPortDisableTxDoneCbTag[IX_ETH_ACC_NUMBER_OF_PORTS]; - -static UINT32 -ixEthAccPortDisableUserBufferCount[IX_ETH_ACC_NUMBER_OF_PORTS]; - -/* - * PortDisable private callbacks functions. They handle the user - * traffic, and the special buffers (one for tx, one for rx) used - * in portDisable. - */ -PRIVATE void -ixEthAccPortDisableTxDone(UINT32 cbTag, - IX_OSAL_MBUF *mbuf) -{ - IxEthAccPortId portId = (IxEthAccPortId)cbTag; - volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState; - - /* check for the special mbuf used in portDisable */ - if (mbuf == ixEthAccMacState[portId].portDisableTxMbufPtr) - { - *txState = TRANSMIT_DONE; - } - else - { - /* increment the count of user traffic during portDisable */ - ixEthAccPortDisableUserBufferCount[portId]++; - - /* call client TxDone function */ - ixEthAccPortDisableTxDoneFn[portId](ixEthAccPortDisableTxDoneCbTag[portId], mbuf); - } -} - -PRIVATE IxEthAccStatus -ixEthAccPortDisableTryTransmit(UINT32 portId) -{ - int key; - IxEthAccStatus status = IX_ETH_ACC_SUCCESS; - volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState; - /* transmit the special buffer again if it is transmitted - * and update the txState - * This section is protected because the portDisable context - * run an identical code, so the system keeps transmitting at the - * maximum rate. - */ - key = ixOsalIrqLock(); - if (*txState == TRANSMIT_DONE) - { - IX_OSAL_MBUF *mbufTxPtr = ixEthAccMacState[portId].portDisableTxMbufPtr; - *txState = TRANSMIT; - status = ixEthAccPortTxFrameSubmit(portId, - mbufTxPtr, - IX_ETH_ACC_TX_DEFAULT_PRIORITY); - } - ixOsalIrqUnlock(key); - - return status; -} - -PRIVATE void -ixEthAccPortDisableTxDoneAndSubmit(UINT32 cbTag, - IX_OSAL_MBUF *mbuf) -{ - IxEthAccPortId portId = (IxEthAccPortId)cbTag; - - /* call the callback which forwards the traffic to the client */ - ixEthAccPortDisableTxDone(cbTag, mbuf); - - /* try to transmit the buffer used in portDisable - * if seen in TxDone - */ - ixEthAccPortDisableTryTransmit(portId); -} - -PRIVATE void -ixEthAccPortDisableRx (IxEthAccPortId portId, - IX_OSAL_MBUF * mBufPtr, - BOOL useMultiBufferCallback) -{ - volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState; - IX_OSAL_MBUF *mNextPtr; - - while (mBufPtr) - { - mNextPtr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mBufPtr); - IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mBufPtr) = NULL; - - /* check for the special mbuf used in portDisable */ - if (mBufPtr == ixEthAccMacState[portId].portDisableRxMbufPtr) - { - *rxState = RECEIVE; - } - else - { - /* increment the count of user traffic during portDisable */ - ixEthAccPortDisableUserBufferCount[portId]++; - - /* reset the received payload length during portDisable */ - IX_OSAL_MBUF_MLEN(mBufPtr) = 0; - IX_OSAL_MBUF_PKT_LEN(mBufPtr) = 0; - - if (useMultiBufferCallback) - { - /* call the user callback with one unchained - * buffer, without payload. A small array is built - * to be used as a parameter (the user callback expects - * to receive an array ended by a NULL pointer. - */ - IX_OSAL_MBUF *mBufPtrArray[2]; - - mBufPtrArray[0] = mBufPtr; - mBufPtrArray[1] = NULL; - ixEthAccPortDisableMultiBufferFn[portId]( - ixEthAccPortDisableMultiBufferCbTag[portId], - mBufPtrArray); - } - else - { - /* call the user callback with a unchained - * buffer, without payload and the destination port is - * unknown. - */ - ixEthAccPortDisableFn[portId]( - ixEthAccPortDisableCbTag[portId], - mBufPtr, - IX_ETH_DB_UNKNOWN_PORT /* port not found */); - } - } - - mBufPtr = mNextPtr; - } -} - -PRIVATE IxEthAccStatus -ixEthAccPortDisableTryReplenish(UINT32 portId) -{ - int key; - IxEthAccStatus status = IX_ETH_ACC_SUCCESS; - volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState; - /* replenish with the special buffer again if it is received - * and update the rxState - * This section is protected because the portDisable context - * run an identical code, so the system keeps replenishing at the - * maximum rate. - */ - key = ixOsalIrqLock(); - if (*rxState == RECEIVE) - { - IX_OSAL_MBUF *mbufRxPtr = ixEthAccMacState[portId].portDisableRxMbufPtr; - *rxState = REPLENISH; - IX_OSAL_MBUF_MLEN(mbufRxPtr) = IX_ETHACC_RX_MBUF_MIN_SIZE; - status = ixEthAccPortRxFreeReplenish(portId, mbufRxPtr); - } - ixOsalIrqUnlock(key); - - return status; -} - -PRIVATE void -ixEthAccPortDisableRxAndReplenish (IxEthAccPortId portId, - IX_OSAL_MBUF * mBufPtr, - BOOL useMultiBufferCallback) -{ - /* call the callback which forwards the traffic to the client */ - ixEthAccPortDisableRx(portId, mBufPtr, useMultiBufferCallback); - - /* try to replenish with the buffer used in portDisable - * if seen in Rx - */ - ixEthAccPortDisableTryReplenish(portId); -} - -PRIVATE void -ixEthAccPortDisableRxCallback (UINT32 cbTag, - IX_OSAL_MBUF * mBufPtr, - UINT32 learnedPortId) -{ - IxEthAccPortId portId = (IxEthAccPortId)cbTag; - - /* call the portDisable receive callback */ - (ixEthAccPortDisableRxTable[portId])(portId, mBufPtr, false); -} - -PRIVATE void -ixEthAccPortDisableMultiBufferRxCallback (UINT32 cbTag, - IX_OSAL_MBUF **mBufPtr) -{ - IxEthAccPortId portId = (IxEthAccPortId)cbTag; - - while (*mBufPtr) - { - /* call the portDisable receive callback with one buffer at a time */ - (ixEthAccPortDisableRxTable[portId])(portId, *mBufPtr++, true); - } -} - -IxEthAccStatus -ixEthAccPortDisablePriv(IxEthAccPortId portId) -{ - IxEthAccStatus status = IX_ETH_ACC_SUCCESS; - int key; - int retry, retryTimeout; - volatile IxEthAccPortDisableState *state = &ixEthAccMacState[portId].portDisableState; - volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState; - volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState; - - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disable port.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /* if the state is being set to what it is already at, do nothing */ - if (!ixEthAccMacState[portId].enabled) - { - return IX_ETH_ACC_SUCCESS; - } - - *state = DISABLED; - - /* disable MAC receive first */ - ixEthAccPortRxDisablePriv(portId); - -#ifdef CONFIG_IXP425_COMPONENT_ETHDB - /* disable ethernet database for this port - It is done now to avoid - * issuing ELT maintenance after requesting 'port disable' in an NPE - */ - if (ixEthDBPortDisable(portId) != IX_ETH_DB_SUCCESS) - { - status = IX_ETH_ACC_FAIL; - IX_ETH_ACC_FATAL_LOG("ixEthAccPortDisable: failed to disable EthDB for this port\n", 0, 0, 0, 0, 0, 0); - } -#endif - - /* enter the critical section */ - key = ixOsalIrqLock(); - - /* swap the Rx and TxDone callbacks */ - ixEthAccPortDisableFn[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn; - ixEthAccPortDisableMultiBufferFn[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn; - ixEthAccPortDisableCbTag[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag; - ixEthAccPortDisableMultiBufferCbTag[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag; - ixEthAccPortDisableTxDoneFn[portId] = ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn; - ixEthAccPortDisableTxDoneCbTag[portId] = ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag; - ixEthAccPortDisableRxTable[portId] = ixEthAccPortDisableRx; - - /* register temporary callbacks */ - ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn = ixEthAccPortDisableRxCallback; - ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag = portId; - - ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn = ixEthAccPortDisableMultiBufferRxCallback; - ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag = portId; - - ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn = ixEthAccPortDisableTxDone; - ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag = portId; - - /* initialise the Rx state and Tx states */ - *txState = TRANSMIT_DONE; - *rxState = RECEIVE; - - /* exit the critical section */ - ixOsalIrqUnlock(key); - - /* enable a NPE loopback */ - if (ixEthAccNpeLoopbackEnablePriv(portId) != IX_ETH_ACC_SUCCESS) - { - status = IX_ETH_ACC_FAIL; - } - - if (status == IX_ETH_ACC_SUCCESS) - { - retry = 0; - - /* Step 1 : Drain Tx traffic and TxDone queues : - * - * Transmit and replenish at least once with the - * special buffers until both of them are seen - * in the callback hook - * - * (the receive callback keeps replenishing, so once we see - * the special Tx buffer, we can be sure that Tx drain is complete) - */ - ixEthAccPortDisableRxTable[portId] - = ixEthAccPortDisableRxAndReplenish; - ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn - = ixEthAccPortDisableTxDone; - - do - { - /* keep replenishing */ - status = ixEthAccPortDisableTryReplenish(portId); - if (status == IX_ETH_ACC_SUCCESS) - { - /* keep transmitting */ - status = ixEthAccPortDisableTryTransmit(portId); - } - if (status == IX_ETH_ACC_SUCCESS) - { - /* wait for some traffic being processed */ - ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS); - } - } - while ((status == IX_ETH_ACC_SUCCESS) - && (retry++ < IX_ETH_ACC_MAX_RETRY) - && (*txState == TRANSMIT)); - - /* Step 2 : Drain Rx traffic, RxFree and Rx queues : - * - * Transmit and replenish at least once with the - * special buffers until both of them are seen - * in the callback hook - * (the transmit callback keeps transmitting, and when we see - * the special Rx buffer, we can be sure that rxFree drain - * is complete) - * - * The nested loop helps to retry if the user was keeping - * replenishing or transmitting during portDisable. - * - * The 2 nested loops ensure more retries if user traffic is - * seen during portDisable : the user should not replenish - * or transmit while portDisable is running. However, because of - * the queueing possibilities in ethAcc dataplane, it is possible - * that a lot of traffic is left in the queues (e.g. when - * transmitting over a low speed link) and therefore, more - * retries are allowed to help flushing the buffers out. - */ - ixEthAccPortDisableRxTable[portId] - = ixEthAccPortDisableRx; - ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn - = ixEthAccPortDisableTxDoneAndSubmit; - - do - { - do - { - ixEthAccPortDisableUserBufferCount[portId] = 0; - - /* keep replenishing */ - status = ixEthAccPortDisableTryReplenish(portId); - if (status == IX_ETH_ACC_SUCCESS) - { - /* keep transmitting */ - status = ixEthAccPortDisableTryTransmit(portId); - } - if (status == IX_ETH_ACC_SUCCESS) - { - /* wait for some traffic being processed */ - ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS); - } - } - while ((status == IX_ETH_ACC_SUCCESS) - && (retry++ < IX_ETH_ACC_MAX_RETRY) - && ((ixEthAccPortDisableUserBufferCount[portId] != 0) - || (*rxState == REPLENISH))); - - /* After the first iteration, change the receive callbacks, - * to process only 1 buffer at a time - */ - ixEthAccPortDisableRxTable[portId] - = ixEthAccPortDisableRx; - ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn - = ixEthAccPortDisableTxDone; - - /* repeat the whole process while user traffic is seen in TxDone - * - * The conditions to stop the loop are - * - Xscale has both Rx and Tx special buffers - * (txState = transmit, rxState = receive) - * - any error in txSubmit or rxReplenish - * - no user traffic seen - * - an excessive amount of retries - */ - } - while ((status == IX_ETH_ACC_SUCCESS) - && (retry < IX_ETH_ACC_MAX_RETRY) - && (*txState == TRANSMIT)); - - /* check the loop exit conditions. The NPE should not hold - * the special buffers. - */ - if ((*rxState == REPLENISH) || (*txState == TRANSMIT)) - { - status = IX_ETH_ACC_FAIL; - } - - if (status == IX_ETH_ACC_SUCCESS) - { - /* Step 3 : Replenish without transmitting until a timeout - * occurs, in order to drain the internal NPE fifos - * - * we can expect a few frames srill held - * in the NPE. - * - * The 2 nested loops take care about the NPE dropping traffic - * (including loopback traffic) when the Rx queue is full. - * - * The timeout value is very conservative - * since the loopback used keeps replenishhing. - * - */ - do - { - ixEthAccPortDisableRxTable[portId] = ixEthAccPortDisableRxAndReplenish; - ixEthAccPortDisableUserBufferCount[portId] = 0; - retryTimeout = 0; - do - { - /* keep replenishing */ - status = ixEthAccPortDisableTryReplenish(portId); - if (status == IX_ETH_ACC_SUCCESS) - { - /* wait for some traffic being processed */ - ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS); - } - } - while ((status == IX_ETH_ACC_SUCCESS) - && (retryTimeout++ < IX_ETH_ACC_MAX_RETRY_TIMEOUT)); - - /* Step 4 : Transmit once. Stop replenish - * - * After the Rx timeout, we are sure that the NPE does not - * hold any frame in its internal NPE fifos. - * - * At this point, the NPE still holds the last rxFree buffer. - * By transmitting a single frame, this should unblock the - * last rxFree buffer. This code just transmit once and - * wait for both frames seen in TxDone and in rxFree. - * - */ - ixEthAccPortDisableRxTable[portId] = ixEthAccPortDisableRx; - status = ixEthAccPortDisableTryTransmit(portId); - - /* the NPE should immediatelyt release - * the last Rx buffer and the last transmitted buffer - * unless the last Tx frame was dropped (rx queue full) - */ - if (status == IX_ETH_ACC_SUCCESS) - { - retryTimeout = 0; - do - { - ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS); - } - while ((*rxState == REPLENISH) - && (retryTimeout++ < IX_ETH_ACC_MAX_RETRY_TIMEOUT)); - } - - /* the NPE may have dropped the traffic because of Rx - * queue being full. This code ensures that the last - * Tx and Rx frames are both received. - */ - } - while ((status == IX_ETH_ACC_SUCCESS) - && (retry++ < IX_ETH_ACC_MAX_RETRY) - && ((*txState == TRANSMIT) - || (*rxState == REPLENISH) - || (ixEthAccPortDisableUserBufferCount[portId] != 0))); - - /* Step 5 : check the final states : the NPE has - * no buffer left, nor in Tx , nor in Rx directions. - */ - if ((*rxState == REPLENISH) || (*txState == TRANSMIT)) - { - status = IX_ETH_ACC_FAIL; - } - } - - /* now all the buffers are drained, disable NPE loopback - * This is done regardless of the logic to drain the queues and - * the internal buffers held by the NPE. - */ - if (ixEthAccNpeLoopbackDisablePriv(portId) != IX_ETH_ACC_SUCCESS) - { - status = IX_ETH_ACC_FAIL; - } - } - - /* disable MAC Tx and Rx services */ - ixEthAccMacState[portId].enabled = false; - ixEthAccMacStateUpdate(portId); - - /* restore the Rx and TxDone callbacks (within a critical section) */ - key = ixOsalIrqLock(); - - ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn = ixEthAccPortDisableFn[portId]; - ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag = ixEthAccPortDisableCbTag[portId]; - ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn = ixEthAccPortDisableMultiBufferFn[portId]; - ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag = ixEthAccPortDisableMultiBufferCbTag[portId]; - ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn = ixEthAccPortDisableTxDoneFn[portId]; - ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag = ixEthAccPortDisableTxDoneCbTag[portId]; - - ixOsalIrqUnlock(key); - - /* the MAC core rx/tx disable may left the MAC hardware in an - * unpredictable state. A hw reset is executed before resetting - * all the MAC parameters to a known value. - */ - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_CORE_CNTRL, - IX_ETH_ACC_CORE_RESET); - - ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY); - - /* rewrite all parameters to their current value */ - ixEthAccMacStateUpdate(portId); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_INT_CLK_THRESH, - IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_CORE_CNTRL, - IX_ETH_ACC_CORE_MDC_EN); - - return status; -} - -IxEthAccStatus -ixEthAccPortEnabledQueryPriv(IxEthAccPortId portId, BOOL *enabled) -{ - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable port.\n",(INT32)portId,0,0,0,0,0); - - /* Since Eth NPE is not available, port must be disabled */ - *enabled = false ; - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - /* Since Eth NPE is not available, port must be disabled */ - *enabled = false ; - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - *enabled = ixEthAccMacState[portId].enabled; - - return IX_ETH_ACC_SUCCESS; -} - -IxEthAccStatus -ixEthAccPortMacResetPriv(IxEthAccPortId portId) -{ - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot reset Ethernet coprocessor.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_CORE_CNTRL, - IX_ETH_ACC_CORE_RESET); - - ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY); - - /* rewrite all parameters to their current value */ - ixEthAccMacStateUpdate(portId); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_INT_CLK_THRESH, - IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_CORE_CNTRL, - IX_ETH_ACC_CORE_MDC_EN); - - return IX_ETH_ACC_SUCCESS; -} - -IxEthAccStatus -ixEthAccPortLoopbackEnable(IxEthAccPortId portId) -{ - UINT32 regval; - - /* Turn off promiscuous mode */ - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable loopback.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /* read register */ - REG_READ(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - regval); - - /* update register */ - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - regval | IX_ETH_ACC_RX_CNTRL1_LOOP_EN); - - return IX_ETH_ACC_SUCCESS; -} - -PRIVATE void -ixEthAccNpeLoopbackMessageCallback (IxNpeMhNpeId npeId, - IxNpeMhMessage msg) -{ - IxEthAccPortId portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId); - -#ifndef NDEBUG - /* Prudent to at least check the port is within range */ - if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS) - { - IX_ETH_ACC_FATAL_LOG("IXETHACC:ixEthAccPortDisableMessageCallback: Illegal port: %u\n", - (UINT32) portId, 0, 0, 0, 0, 0); - - return; - } -#endif - - /* unlock message reception mutex */ - ixOsalMutexUnlock(&ixEthAccMacState[portId].npeLoopbackMessageLock); -} - -IxEthAccStatus -ixEthAccNpeLoopbackEnablePriv(IxEthAccPortId portId) -{ - IX_STATUS npeMhStatus; - IxNpeMhMessage message; - IxEthAccStatus status = IX_ETH_ACC_SUCCESS; - - /* Turn off promiscuous mode */ - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable NPE loopback.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /* enable NPE loopback (lsb of the message contains the value 1) */ - message.data[0] = (IX_ETHNPE_SETLOOPBACK_MODE << IX_ETH_ACC_MAC_MSGID_SHL) - | 0x01; - message.data[1] = 0; - - npeMhStatus = ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId), - message, - IX_ETHNPE_SETLOOPBACK_MODE_ACK, - ixEthAccNpeLoopbackMessageCallback, - IX_NPEMH_SEND_RETRIES_DEFAULT); - - if (npeMhStatus != IX_SUCCESS) - { - status = IX_ETH_ACC_FAIL; - } - else - { - /* wait for NPE loopbackEnable response */ - if (ixOsalMutexLock(&ixEthAccMacState[portId]. npeLoopbackMessageLock, - IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS) - != IX_SUCCESS) - { - status = IX_ETH_ACC_FAIL; - } - } - - return status; -} - -IxEthAccStatus -ixEthAccPortTxEnablePriv(IxEthAccPortId portId) -{ - UINT32 regval; - - /* Turn off promiscuous mode */ - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable TX.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /* read register */ - REG_READ(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_TX_CNTRL1, - regval); - - /* update register */ - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_TX_CNTRL1, - regval | IX_ETH_ACC_TX_CNTRL1_TX_EN); - - return IX_ETH_ACC_SUCCESS; -} - -IxEthAccStatus -ixEthAccPortRxEnablePriv(IxEthAccPortId portId) -{ - UINT32 regval; - - /* Turn off promiscuous mode */ - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable RX.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /* read register */ - REG_READ(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - regval); - - /* update register */ - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - regval | IX_ETH_ACC_RX_CNTRL1_RX_EN); - - return IX_ETH_ACC_SUCCESS; -} - -IxEthAccStatus -ixEthAccPortLoopbackDisable(IxEthAccPortId portId) -{ - UINT32 regval; - - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable loopback.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /*disable MAC loopabck */ - REG_READ(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - regval); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - (regval & ~IX_ETH_ACC_RX_CNTRL1_LOOP_EN)); - - return IX_ETH_ACC_SUCCESS; -} - -IxEthAccStatus -ixEthAccNpeLoopbackDisablePriv(IxEthAccPortId portId) -{ - IX_STATUS npeMhStatus; - IxNpeMhMessage message; - IxEthAccStatus status = IX_ETH_ACC_SUCCESS; - - /* Turn off promiscuous mode */ - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable NPE loopback.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /* disable NPE loopback (lsb of the message contains the value 0) */ - message.data[0] = (IX_ETHNPE_SETLOOPBACK_MODE << IX_ETH_ACC_MAC_MSGID_SHL); - message.data[1] = 0; - - npeMhStatus = ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId), - message, - IX_ETHNPE_SETLOOPBACK_MODE_ACK, - ixEthAccNpeLoopbackMessageCallback, - IX_NPEMH_SEND_RETRIES_DEFAULT); - - if (npeMhStatus != IX_SUCCESS) - { - status = IX_ETH_ACC_FAIL; - } - else - { - /* wait for NPE loopbackEnable response */ - if (ixOsalMutexLock(&ixEthAccMacState[portId].npeLoopbackMessageLock, - IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS) - != IX_SUCCESS) - { - status = IX_ETH_ACC_FAIL; - } - } - - return status; -} - -IxEthAccStatus -ixEthAccPortTxDisablePriv(IxEthAccPortId portId) -{ - UINT32 regval; - - /* Turn off promiscuous mode */ - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable TX.\n", (INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /* read register */ - REG_READ(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_TX_CNTRL1, - regval); - - /* update register */ - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_TX_CNTRL1, - (regval & ~IX_ETH_ACC_TX_CNTRL1_TX_EN)); - - return IX_ETH_ACC_SUCCESS; -} - -IxEthAccStatus -ixEthAccPortRxDisablePriv(IxEthAccPortId portId) -{ - UINT32 regval; - - /* Turn off promiscuous mode */ - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable RX.\n", (INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /* read register */ - REG_READ(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - regval); - - /* update register */ - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - (regval & ~IX_ETH_ACC_RX_CNTRL1_RX_EN)); - - return IX_ETH_ACC_SUCCESS; -} - -IxEthAccStatus -ixEthAccPortPromiscuousModeClearPriv(IxEthAccPortId portId) -{ - UINT32 regval; - - /* Turn off promiscuous mode */ - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot clear promiscuous mode.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /*set bit 5 of Rx control 1 - enable address filtering*/ - REG_READ(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - regval); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - regval | IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN); - - ixEthAccMacState[portId].promiscuous = false; - - ixEthAccMulticastAddressSet(portId); - - return IX_ETH_ACC_SUCCESS; -} - -IxEthAccStatus -ixEthAccPortPromiscuousModeSetPriv(IxEthAccPortId portId) -{ - UINT32 regval; - - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot set promiscuous mode.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /* - * Set bit 5 of Rx control 1 - We enable address filtering even in - * promiscuous mode because we want the MAC to set the appropriate - * bits in m_flags which doesn't happen if we turn off filtering. - */ - REG_READ(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - regval); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - regval | IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN); - - ixEthAccMacState[portId].promiscuous = true; - - ixEthAccMulticastAddressSet(portId); - - return IX_ETH_ACC_SUCCESS; -} - -IxEthAccStatus -ixEthAccPortUnicastMacAddressSetPriv (IxEthAccPortId portId, - IxEthAccMacAddr *macAddr) -{ - UINT32 i; - - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot set Unicast Mac Address.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - - if (macAddr == NULL) - { - return IX_ETH_ACC_FAIL; - } - - if ( macAddr->macAddress[0] & IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT ) - { - /* This is a multicast/broadcast address cant set it ! */ - return IX_ETH_ACC_FAIL; - } - - if ( macAddr->macAddress[0] == 0 && - macAddr->macAddress[1] == 0 && - macAddr->macAddress[2] == 0 && - macAddr->macAddress[3] == 0 && - macAddr->macAddress[4] == 0 && - macAddr->macAddress[5] == 0 ) - { - /* This is an invalid mac address cant set it ! */ - return IX_ETH_ACC_FAIL; - } - -#ifdef CONFIG_IXP425_COMPONENT_ETHDB - /* update the MAC address in the ethernet database */ - if (ixEthDBPortAddressSet(portId, (IxEthDBMacAddr *) macAddr) != IX_ETH_DB_SUCCESS) - { - return IX_ETH_ACC_FAIL; - } -#endif - - /*Set the Unicast MAC to the specified value*/ - for(i=0;imacAddress[i]); - } - ixEthAccMacState[portId].initDone = true; - - return IX_ETH_ACC_SUCCESS; -} - -IxEthAccStatus -ixEthAccPortUnicastMacAddressGetPriv (IxEthAccPortId portId, - IxEthAccMacAddr *macAddr) -{ - /*Return the current value of the Unicast MAC from h/w - for the specified port*/ - UINT32 i; - - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get Unicast Mac Address.\n",(INT32)portId,0,0,0,0,0); - /* Since Eth Npe is unavailable, return invalid MAC Address = 00:00:00:00:00:00 */ - for(i=0;imacAddress[i] = 0; - } - return IX_ETH_ACC_SUCCESS ; - } - - if(!ixEthAccMacState[portId].initDone) - { - return (IX_ETH_ACC_MAC_UNINITIALIZED); - } - - if (macAddr == NULL) - { - return IX_ETH_ACC_FAIL; - } - - - for(i=0;imacAddress[i]); - } - return IX_ETH_ACC_SUCCESS; -} - -PRIVATE IxEthAccStatus -ixEthAccPortMulticastMacAddressGet (IxEthAccPortId portId, - IxEthAccMacAddr *macAddr) -{ - /*Return the current value of the Multicast MAC from h/w - for the specified port*/ - UINT32 i; - - for(i=0;imacAddress[i]); - } - - return IX_ETH_ACC_SUCCESS; -} - -PRIVATE IxEthAccStatus -ixEthAccPortMulticastMacFilterGet (IxEthAccPortId portId, - IxEthAccMacAddr *macAddr) -{ - /*Return the current value of the Multicast MAC from h/w - for the specified port*/ - UINT32 i; - - for(i=0;imacAddress[i]); - } - return IX_ETH_ACC_SUCCESS; -} - -IxEthAccStatus -ixEthAccPortMulticastAddressJoinPriv (IxEthAccPortId portId, - IxEthAccMacAddr *macAddr) -{ - UINT32 i; - IxEthAccMacAddr broadcastAddr = {{0xff,0xff,0xff,0xff,0xff,0xff}}; - - /*Check that the port parameter is valid*/ - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot join Multicast Mac Address.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /*Check that the mac address is valid*/ - if(macAddr == NULL) - { - return IX_ETH_ACC_FAIL; - } - - /* Check that this is a multicast address */ - if (!(macAddr->macAddress[0] & IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT)) - { - return IX_ETH_ACC_FAIL; - } - - /* We don't add the Broadcast address */ - if(ixEthAccMacEqual(&broadcastAddr, macAddr)) - { - return IX_ETH_ACC_FAIL; - } - - for (i = 0; - i= IX_ETH_ACC_MAX_MULTICAST_ADDRESSES) - { - return IX_ETH_ACC_FAIL; - } - - /*First add the address to the multicast table for the - specified port*/ - i=ixEthAccMacState[portId].mcastAddrIndex; - - memcpy(&ixEthAccMacState[portId].mcastAddrsTable[i], - &macAddr->macAddress, - IX_IEEE803_MAC_ADDRESS_SIZE); - - /*Increment the index into the table, this must be done here - as MulticastAddressSet below needs to know about the latest - entry. - */ - ixEthAccMacState[portId].mcastAddrIndex++; - - /*Then calculate the new value to be written to the address and - address mask registers*/ - ixEthAccMulticastAddressSet(portId); - - return IX_ETH_ACC_SUCCESS; -} - - -IxEthAccStatus -ixEthAccPortMulticastAddressJoinAllPriv (IxEthAccPortId portId) -{ - IxEthAccMacAddr mcastMacAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}}; - - /*Check that the port parameter is valid*/ - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot join all Multicast Address.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /* remove all entries from the database and - * insert a multicast entry - */ - memcpy(&ixEthAccMacState[portId].mcastAddrsTable[0], - &mcastMacAddr.macAddress, - IX_IEEE803_MAC_ADDRESS_SIZE); - - ixEthAccMacState[portId].mcastAddrIndex = 1; - ixEthAccMacState[portId].joinAll = true; - - ixEthAccMulticastAddressSet(portId); - - return IX_ETH_ACC_SUCCESS; -} - -IxEthAccStatus -ixEthAccPortMulticastAddressLeavePriv (IxEthAccPortId portId, - IxEthAccMacAddr *macAddr) -{ - UINT32 i; - IxEthAccMacAddr mcastMacAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}}; - - /*Check that the port parameter is valid*/ - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot leave Multicast Address.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - /*Check that the mac address is valid*/ - if(macAddr == NULL) - { - return IX_ETH_ACC_FAIL; - } - /* Remove this mac address from the mask for the specified port - * we copy down all entries above the blanked entry, and - * decrement the index - */ - i=0; - - while(i= IX_ETH_ACC_NUMBER_OF_PORTS) - { - IX_ETH_ACC_FATAL_LOG( - "IXETHACC:ixEthAccMacNpeStatsMessageCallback: Illegal port: %u\n", - (UINT32)portId, 0, 0, 0, 0, 0); - return; - } -#endif - - /*Unblock Stats Get call*/ - ixOsalMutexUnlock(&ixEthAccMacState[portId].ackMIBStatsLock); - -} - -PRIVATE void -ixEthAccMibIIStatsEndianConvert (IxEthEthObjStats *retStats) -{ - /* endianness conversion */ - - /* Rx stats */ - retStats->dot3StatsAlignmentErrors = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsAlignmentErrors); - retStats->dot3StatsFCSErrors = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsFCSErrors); - retStats->dot3StatsInternalMacReceiveErrors = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsInternalMacReceiveErrors); - retStats->RxOverrunDiscards = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxOverrunDiscards); - retStats->RxLearnedEntryDiscards = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxLearnedEntryDiscards); - retStats->RxLargeFramesDiscards = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxLargeFramesDiscards); - retStats->RxSTPBlockedDiscards = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxSTPBlockedDiscards); - retStats->RxVLANTypeFilterDiscards = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxVLANTypeFilterDiscards); - retStats->RxVLANIdFilterDiscards = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxVLANIdFilterDiscards); - retStats->RxInvalidSourceDiscards = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxInvalidSourceDiscards); - retStats->RxBlackListDiscards = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxBlackListDiscards); - retStats->RxWhiteListDiscards = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxWhiteListDiscards); - retStats->RxUnderflowEntryDiscards = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxUnderflowEntryDiscards); - - /* Tx stats */ - retStats->dot3StatsSingleCollisionFrames = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsSingleCollisionFrames); - retStats->dot3StatsMultipleCollisionFrames = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsMultipleCollisionFrames); - retStats->dot3StatsDeferredTransmissions = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsDeferredTransmissions); - retStats->dot3StatsLateCollisions = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsLateCollisions); - retStats->dot3StatsExcessiveCollsions = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsExcessiveCollsions); - retStats->dot3StatsInternalMacTransmitErrors = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsInternalMacTransmitErrors); - retStats->dot3StatsCarrierSenseErrors = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsCarrierSenseErrors); - retStats->TxLargeFrameDiscards = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->TxLargeFrameDiscards); - retStats->TxVLANIdFilterDiscards = - IX_OSAL_SWAP_BE_SHARED_LONG(retStats->TxVLANIdFilterDiscards); -} - -IxEthAccStatus -ixEthAccMibIIStatsGet (IxEthAccPortId portId, - IxEthEthObjStats *retStats ) -{ - IxNpeMhMessage message; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - printf("EthAcc: ixEthAccMibIIStatsGet (Mac) EthAcc service is not initialized\n"); - return (IX_ETH_ACC_FAIL); - } - - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (retStats == NULL) - { - printf("EthAcc: ixEthAccMibIIStatsGet (Mac) NULL argument\n"); - return (IX_ETH_ACC_FAIL); - } - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - printf("EthAcc: ixEthAccMibIIStatsGet (Mac) NPE for port %d is not available\n", portId); - - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get MIB II Stats.\n",(INT32)portId,0,0,0,0,0); - - /* Return all zero stats */ - IX_ETH_ACC_MEMSET(retStats, 0, sizeof(IxEthEthObjStats)); - - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - printf("EthAcc: ixEthAccMibIIStatsGet (Mac) port %d is not initialized\n", portId); - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - IX_OSAL_CACHE_INVALIDATE(retStats, sizeof(IxEthEthObjStats)); - - message.data[0] = IX_ETHNPE_GETSTATS << IX_ETH_ACC_MAC_MSGID_SHL; - message.data[1] = (UINT32) IX_OSAL_MMU_VIRT_TO_PHYS(retStats); - - /* Permit only one task to request MIB statistics Get operation - at a time */ - ixOsalMutexLock(&ixEthAccMacState[portId].MIBStatsGetAccessLock, IX_OSAL_WAIT_FOREVER); - - if(ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId), - message, - IX_ETHNPE_GETSTATS, - ixEthAccMacNpeStatsMessageCallback, - IX_NPEMH_SEND_RETRIES_DEFAULT) - != IX_SUCCESS) - { - ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetAccessLock); - - printf("EthAcc: (Mac) StatsGet failed to send NPE message\n"); - - return IX_ETH_ACC_FAIL; - } - - /* Wait for callback invocation indicating response to - this request - we need this mutex in order to ensure - that the return from this function is synchronous */ - ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsLock, IX_ETH_ACC_MIB_STATS_DELAY_MSECS); - - /* Permit other tasks to perform MIB statistics Get operation */ - ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetAccessLock); - - ixEthAccMibIIStatsEndianConvert (retStats); - - return IX_ETH_ACC_SUCCESS; -} - - -PRIVATE void -ixEthAccMacNpeStatsResetMessageCallback (IxNpeMhNpeId npeId, - IxNpeMhMessage msg) -{ - IxEthAccPortId portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId); - -#ifndef NDEBUG - /* Prudent to at least check the port is within range */ - if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS) - { - IX_ETH_ACC_FATAL_LOG( - "IXETHACC:ixEthAccMacNpeStatsResetMessageCallback: Illegal port: %u\n", - (UINT32)portId, 0, 0, 0, 0, 0); - return; - } -#endif - - /*Unblock Stats Get & reset call*/ - ixOsalMutexUnlock(&ixEthAccMacState[portId].ackMIBStatsResetLock); - -} - - - -IxEthAccStatus -ixEthAccMibIIStatsGetClear (IxEthAccPortId portId, - IxEthEthObjStats *retStats) -{ - IxNpeMhMessage message; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) EthAcc service is not initialized\n"); - return (IX_ETH_ACC_FAIL); - } - - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (retStats == NULL) - { - printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) NULL argument\n"); - return (IX_ETH_ACC_FAIL); - } - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) NPE for port %d is not available\n", portId); - - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get and clear MIB II Stats.\n", (INT32)portId, 0, 0, 0, 0, 0); - - /* Return all zero stats */ - IX_ETH_ACC_MEMSET(retStats, 0, sizeof(IxEthEthObjStats)); - - return IX_ETH_ACC_SUCCESS ; - } - - if (!IX_ETH_IS_PORT_INITIALIZED(portId)) - { - printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) port %d is not initialized\n", portId); - return (IX_ETH_ACC_PORT_UNINITIALIZED); - } - - IX_OSAL_CACHE_INVALIDATE(retStats, sizeof(IxEthEthObjStats)); - - message.data[0] = IX_ETHNPE_RESETSTATS << IX_ETH_ACC_MAC_MSGID_SHL; - message.data[1] = (UINT32) IX_OSAL_MMU_VIRT_TO_PHYS(retStats); - - /* Permit only one task to request MIB statistics Get-Reset operation at a time */ - ixOsalMutexLock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock, IX_OSAL_WAIT_FOREVER); - - if(ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId), - message, - IX_ETHNPE_RESETSTATS, - ixEthAccMacNpeStatsResetMessageCallback, - IX_NPEMH_SEND_RETRIES_DEFAULT) - != IX_SUCCESS) - { - ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock); - - printf("EthAcc: (Mac) ixEthAccMibIIStatsGetClear failed to send NPE message\n"); - - return IX_ETH_ACC_FAIL; - } - - /* Wait for callback invocation indicating response to this request */ - ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsResetLock, IX_ETH_ACC_MIB_STATS_DELAY_MSECS); - - /* permit other tasks to get and reset MIB stats*/ - ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock); - - ixEthAccMibIIStatsEndianConvert(retStats); - - return IX_ETH_ACC_SUCCESS; -} - -IxEthAccStatus -ixEthAccMibIIStatsClear (IxEthAccPortId portId) -{ - static IxEthEthObjStats retStats; - IxEthAccStatus status; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot clear MIB II Stats.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - /* there is no reset operation without a corresponding Get */ - status = ixEthAccMibIIStatsGetClear(portId, &retStats); - - return status; -} - -/* Initialize the ethernet MAC settings */ -IxEthAccStatus -ixEthAccMacInit(IxEthAccPortId portId) -{ - IX_OSAL_MBUF_POOL* portDisablePool; - UINT8 *data; - - IX_ETH_ACC_VALIDATE_PORT_ID(portId); - - if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) - { - IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot initialize Mac.\n",(INT32)portId,0,0,0,0,0); - return IX_ETH_ACC_SUCCESS ; - } - - if(ixEthAccMacState[portId].macInitialised == false) - { - ixEthAccMacState[portId].fullDuplex = true; - ixEthAccMacState[portId].rxFCSAppend = true; - ixEthAccMacState[portId].txFCSAppend = true; - ixEthAccMacState[portId].txPADAppend = true; - ixEthAccMacState[portId].enabled = false; - ixEthAccMacState[portId].promiscuous = true; - ixEthAccMacState[portId].joinAll = false; - ixEthAccMacState[portId].initDone = false; - ixEthAccMacState[portId].macInitialised = true; - - /* initialize MIB stats mutexes */ - ixOsalMutexInit(&ixEthAccMacState[portId].ackMIBStatsLock); - ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsLock, IX_OSAL_WAIT_FOREVER); - - ixOsalMutexInit(&ixEthAccMacState[portId].ackMIBStatsResetLock); - ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsResetLock, IX_OSAL_WAIT_FOREVER); - - ixOsalMutexInit(&ixEthAccMacState[portId].MIBStatsGetAccessLock); - - ixOsalMutexInit(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock); - - ixOsalMutexInit(&ixEthAccMacState[portId].npeLoopbackMessageLock); - - ixEthAccMacState[portId].portDisableRxMbufPtr = NULL; - ixEthAccMacState[portId].portDisableTxMbufPtr = NULL; - - portDisablePool = IX_OSAL_MBUF_POOL_INIT(2, - IX_ETHACC_RX_MBUF_MIN_SIZE, - "portDisable Pool"); - - IX_OSAL_ENSURE(portDisablePool != NULL, "Failed to initialize PortDisable pool"); - - ixEthAccMacState[portId].portDisableRxMbufPtr = IX_OSAL_MBUF_POOL_GET(portDisablePool); - ixEthAccMacState[portId].portDisableTxMbufPtr = IX_OSAL_MBUF_POOL_GET(portDisablePool); - - IX_OSAL_ENSURE(ixEthAccMacState[portId].portDisableRxMbufPtr != NULL, - "Pool allocation failed"); - IX_OSAL_ENSURE(ixEthAccMacState[portId].portDisableTxMbufPtr != NULL, - "Pool allocation failed"); - /* fill the payload of the Rx mbuf used in portDisable */ - IX_OSAL_MBUF_MLEN(ixEthAccMacState[portId].portDisableRxMbufPtr) = IX_ETHACC_RX_MBUF_MIN_SIZE; - - memset(IX_OSAL_MBUF_MDATA(ixEthAccMacState[portId].portDisableRxMbufPtr), - 0xAA, - IX_ETHACC_RX_MBUF_MIN_SIZE); - - /* fill the payload of the Tx mbuf used in portDisable (64 bytes) */ - IX_OSAL_MBUF_MLEN(ixEthAccMacState[portId].portDisableTxMbufPtr) = 64; - IX_OSAL_MBUF_PKT_LEN(ixEthAccMacState[portId].portDisableTxMbufPtr) = 64; - - data = (UINT8 *) IX_OSAL_MBUF_MDATA(ixEthAccMacState[portId].portDisableTxMbufPtr); - memset(data, 0xBB, 64); - data[0] = 0x00; /* unicast destination MAC address */ - data[6] = 0x00; /* unicast source MAC address */ - data[12] = 0x08; /* typelength : IP frame */ - data[13] = 0x00; /* typelength : IP frame */ - - IX_OSAL_CACHE_FLUSH(data, 64); - } - - IX_OSAL_ASSERT (ixEthAccMacBase[portId] != 0); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_CORE_CNTRL, - IX_ETH_ACC_CORE_RESET); - - ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_CORE_CNTRL, - IX_ETH_ACC_CORE_MDC_EN); - - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_INT_CLK_THRESH, - IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT); - - ixEthAccMacStateUpdate(portId); - - return IX_ETH_ACC_SUCCESS; -} - -/* PRIVATE Functions*/ - -PRIVATE void -ixEthAccMacStateUpdate(IxEthAccPortId portId) -{ - UINT32 regval; - - if ( ixEthAccMacState[portId].enabled == false ) - { - /* Just disable both the transmitter and reciver in the MAC. */ - REG_READ(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - regval); - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - regval & ~IX_ETH_ACC_RX_CNTRL1_RX_EN); - - REG_READ(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_TX_CNTRL1, - regval); - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_TX_CNTRL1, - regval & ~IX_ETH_ACC_TX_CNTRL1_TX_EN); - } - - if(ixEthAccMacState[portId].fullDuplex) - { - ixEthAccPortDuplexModeSetPriv (portId, IX_ETH_ACC_FULL_DUPLEX); - } - else - { - ixEthAccPortDuplexModeSetPriv (portId, IX_ETH_ACC_HALF_DUPLEX); - } - - if(ixEthAccMacState[portId].rxFCSAppend) - { - ixEthAccPortRxFrameAppendFCSEnablePriv (portId); - } - else - { - ixEthAccPortRxFrameAppendFCSDisablePriv (portId); - } - - if(ixEthAccMacState[portId].txFCSAppend) - { - ixEthAccPortTxFrameAppendFCSEnablePriv (portId); - } - else - { - ixEthAccPortTxFrameAppendFCSDisablePriv (portId); - } - - if(ixEthAccMacState[portId].txPADAppend) - { - ixEthAccPortTxFrameAppendPaddingEnablePriv (portId); - } - else - { - ixEthAccPortTxFrameAppendPaddingDisablePriv (portId); - } - - if(ixEthAccMacState[portId].promiscuous) - { - ixEthAccPortPromiscuousModeSetPriv(portId); - } - else - { - ixEthAccPortPromiscuousModeClearPriv(portId); - } - - if ( ixEthAccMacState[portId].enabled == true ) - { - /* Enable both the transmitter and reciver in the MAC. */ - REG_READ(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - regval); - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_RX_CNTRL1, - regval | IX_ETH_ACC_RX_CNTRL1_RX_EN); - - REG_READ(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_TX_CNTRL1, - regval); - REG_WRITE(ixEthAccMacBase[portId], - IX_ETH_ACC_MAC_TX_CNTRL1, - regval | IX_ETH_ACC_TX_CNTRL1_TX_EN); - } -} - - -PRIVATE BOOL -ixEthAccMacEqual(IxEthAccMacAddr *macAddr1, - IxEthAccMacAddr *macAddr2) -{ - UINT32 i; - for(i=0;imacAddress[i] != macAddr2->macAddress[i]) - { - return false; - } - } - return true; -} - -PRIVATE void -ixEthAccMacPrint(IxEthAccMacAddr *m) -{ - printf("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x", - m->macAddress[0], m->macAddress[1], - m->macAddress[2], m->macAddress[3], - m->macAddress[4], m->macAddress[5]); -} - -/* Set the multicast address and address mask registers - * - * A bit in the address mask register must be set if - * all multicast addresses always have that bit set, or if - * all multicast addresses always have that bit cleared. - * - * A bit in the address register must be set if all multicast - * addresses have that bit set, otherwise, it should be cleared - */ - -PRIVATE void -ixEthAccMulticastAddressSet(IxEthAccPortId portId) -{ - UINT32 i; - UINT32 j; - IxEthAccMacAddr addressMask; - IxEthAccMacAddr address; - IxEthAccMacAddr alwaysClearBits; - IxEthAccMacAddr alwaysSetBits; - - /* calculate alwaysClearBits and alwaysSetBits: - * alwaysClearBits is calculated by ORing all - * multicast addresses, those bits that are always - * clear are clear in the result - * - * alwaysSetBits is calculated by ANDing all - * multicast addresses, those bits that are always set - * are set in the result - */ - - if (ixEthAccMacState[portId].promiscuous == true) - { - /* Promiscuous Mode is set, and filtering - * allow all packets, and enable the mcast and - * bcast detection. - */ - memset(&addressMask.macAddress, - 0, - IX_IEEE803_MAC_ADDRESS_SIZE); - memset(&address.macAddress, - 0, - IX_IEEE803_MAC_ADDRESS_SIZE); - } - else - { - if(ixEthAccMacState[portId].joinAll == true) - { - /* Join all is set. The mask and address are - * the multicast settings. - */ - IxEthAccMacAddr macAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}}; - - memcpy(addressMask.macAddress, - macAddr.macAddress, - IX_IEEE803_MAC_ADDRESS_SIZE); - memcpy(address.macAddress, - macAddr.macAddress, - IX_IEEE803_MAC_ADDRESS_SIZE); - } - else if(ixEthAccMacState[portId].mcastAddrIndex == 0) - { - /* No entry in the filtering database, - * Promiscuous Mode is cleared, Broadcast filtering - * is configured. - */ - memset(addressMask.macAddress, - IX_ETH_ACC_MAC_ALL_BITS_SET, - IX_IEEE803_MAC_ADDRESS_SIZE); - memset(address.macAddress, - IX_ETH_ACC_MAC_ALL_BITS_SET, - IX_IEEE803_MAC_ADDRESS_SIZE); - } - else - { - /* build a mask and an address which mix all entreis - * from the list of multicast addresses - */ - memset(alwaysClearBits.macAddress, - 0, - IX_IEEE803_MAC_ADDRESS_SIZE); - memset(alwaysSetBits.macAddress, - IX_ETH_ACC_MAC_ALL_BITS_SET, - IX_IEEE803_MAC_ADDRESS_SIZE); - - for(i=0;i> 8) & 0xff); - - REG_WRITE(miiBaseAddressVirt, - IX_ETH_ACC_MAC_MDIO_CMD_3, - (mdioCommand >> 16) & 0xff); - - REG_WRITE(miiBaseAddressVirt, - IX_ETH_ACC_MAC_MDIO_CMD_4, - (mdioCommand >> 24) & 0xff); -} - -PRIVATE void -ixEthAccMdioCmdRead(UINT32 *data) -{ - UINT32 regval; - - REG_READ(miiBaseAddressVirt, - IX_ETH_ACC_MAC_MDIO_CMD_1, - regval); - - *data = regval & 0xff; - - REG_READ(miiBaseAddressVirt, - IX_ETH_ACC_MAC_MDIO_CMD_2, - regval); - - *data |= (regval & 0xff) << 8; - - REG_READ(miiBaseAddressVirt, - IX_ETH_ACC_MAC_MDIO_CMD_3, - regval); - - *data |= (regval & 0xff) << 16; - - REG_READ(miiBaseAddressVirt, - IX_ETH_ACC_MAC_MDIO_CMD_4, - regval); - - *data |= (regval & 0xff) << 24; - -} - -PRIVATE void -ixEthAccMdioStatusRead(UINT32 *data) -{ - UINT32 regval; - - REG_READ(miiBaseAddressVirt, - IX_ETH_ACC_MAC_MDIO_STS_1, - regval); - - *data = regval & 0xff; - - REG_READ(miiBaseAddressVirt, - IX_ETH_ACC_MAC_MDIO_STS_2, - regval); - - *data |= (regval & 0xff) << 8; - - REG_READ(miiBaseAddressVirt, - IX_ETH_ACC_MAC_MDIO_STS_3, - regval); - - *data |= (regval & 0xff) << 16; - - REG_READ(miiBaseAddressVirt, - IX_ETH_ACC_MAC_MDIO_STS_4, - regval); - - *data |= (regval & 0xff) << 24; - -} - - -/******************************************************************** - * ixEthAccMiiInit - */ -IxEthAccStatus -ixEthAccMiiInit() -{ - if(ixOsalMutexInit(&miiAccessLock)!= IX_SUCCESS) - { - return IX_ETH_ACC_FAIL; - } - - miiBaseAddressVirt = (UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_0_BASE, IX_OSAL_IXP400_ETHA_MAP_SIZE); - - if (miiBaseAddressVirt == 0) - { - ixOsalLog(IX_OSAL_LOG_LVL_FATAL, - IX_OSAL_LOG_DEV_STDOUT, - "EthAcc: Could not map MII I/O mapped memory\n", - 0, 0, 0, 0, 0, 0); - - return IX_ETH_ACC_FAIL; - } - - return IX_ETH_ACC_SUCCESS; -} - -void -ixEthAccMiiUnload(void) -{ - IX_OSAL_MEM_UNMAP(miiBaseAddressVirt); - - miiBaseAddressVirt = 0; -} - -PUBLIC IxEthAccStatus -ixEthAccMiiAccessTimeoutSet(UINT32 timeout, UINT32 retryCount) -{ - if (retryCount < 1) return IX_ETH_ACC_FAIL; - - ixEthAccMiiRetryCount = retryCount; - ixEthAccMiiAccessTimeout = timeout; - - return IX_ETH_ACC_SUCCESS; -} - -/********************************************************************* - * ixEthAccMiiReadRtn - read a 16 bit value from a PHY - */ -IxEthAccStatus -ixEthAccMiiReadRtn (UINT8 phyAddr, - UINT8 phyReg, - UINT16 *value) -{ - UINT32 mdioCommand; - UINT32 regval; - UINT32 miiTimeout; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - if ((phyAddr >= IXP425_ETH_ACC_MII_MAX_ADDR) - || (phyReg >= IXP425_ETH_ACC_MII_MAX_REG)) - { - return (IX_ETH_ACC_FAIL); - } - - if (value == NULL) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&miiAccessLock, IX_OSAL_WAIT_FOREVER); - mdioCommand = phyReg << IX_ETH_ACC_MII_REG_SHL - | phyAddr << IX_ETH_ACC_MII_ADDR_SHL; - mdioCommand |= IX_ETH_ACC_MII_GO; - - ixEthAccMdioCmdWrite(mdioCommand); - - miiTimeout = ixEthAccMiiRetryCount; - - while(miiTimeout) - { - - ixEthAccMdioCmdRead(®val); - - if((regval & IX_ETH_ACC_MII_GO) == 0x0) - { - break; - } - /* Sleep for a while */ - ixOsalSleep(ixEthAccMiiAccessTimeout); - miiTimeout--; - } - - - - if(miiTimeout == 0) - { - ixOsalMutexUnlock(&miiAccessLock); - *value = 0xffff; - return IX_ETH_ACC_FAIL; - } - - - ixEthAccMdioStatusRead(®val); - if(regval & IX_ETH_ACC_MII_READ_FAIL) - { - ixOsalMutexUnlock(&miiAccessLock); - *value = 0xffff; - return IX_ETH_ACC_FAIL; - } - - *value = regval & 0xffff; - ixOsalMutexUnlock(&miiAccessLock); - return IX_ETH_ACC_SUCCESS; - -} - - -/********************************************************************* - * ixEthAccMiiWriteRtn - write a 16 bit value to a PHY - */ -IxEthAccStatus -ixEthAccMiiWriteRtn (UINT8 phyAddr, - UINT8 phyReg, - UINT16 value) -{ - UINT32 mdioCommand; - UINT32 regval; - UINT16 readVal; - UINT32 miiTimeout; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - if ((phyAddr >= IXP425_ETH_ACC_MII_MAX_ADDR) - || (phyReg >= IXP425_ETH_ACC_MII_MAX_REG)) - { - return (IX_ETH_ACC_FAIL); - } - - /* ensure that a PHY is present at this address */ - if(ixEthAccMiiReadRtn(phyAddr, - IX_ETH_ACC_MII_CTRL_REG, - &readVal) != IX_ETH_ACC_SUCCESS) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&miiAccessLock, IX_OSAL_WAIT_FOREVER); - mdioCommand = phyReg << IX_ETH_ACC_MII_REG_SHL - | phyAddr << IX_ETH_ACC_MII_ADDR_SHL ; - mdioCommand |= IX_ETH_ACC_MII_GO | IX_ETH_ACC_MII_WRITE | value; - - ixEthAccMdioCmdWrite(mdioCommand); - - miiTimeout = ixEthAccMiiRetryCount; - - while(miiTimeout) - { - - ixEthAccMdioCmdRead(®val); - - /*The "GO" bit is reset to 0 when the write completes*/ - if((regval & IX_ETH_ACC_MII_GO) == 0x0) - { - break; - } - /* Sleep for a while */ - ixOsalSleep(ixEthAccMiiAccessTimeout); - miiTimeout--; - } - - ixOsalMutexUnlock(&miiAccessLock); - if(miiTimeout == 0) - { - return IX_ETH_ACC_FAIL; - } - return IX_ETH_ACC_SUCCESS; -} - - -/***************************************************************** - * - * Phy query functions - * - */ -IxEthAccStatus -ixEthAccMiiStatsShow (UINT32 phyAddr) -{ - UINT16 regval; - printf("Regisers on PHY at address 0x%x\n", phyAddr); - ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_CTRL_REG, ®val); - printf(" Control Register : 0x%4.4x\n", regval); - ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_STAT_REG, ®val); - printf(" Status Register : 0x%4.4x\n", regval); - ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_PHY_ID1_REG, ®val); - printf(" PHY ID1 Register : 0x%4.4x\n", regval); - ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_PHY_ID2_REG, ®val); - printf(" PHY ID2 Register : 0x%4.4x\n", regval); - ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_AN_ADS_REG, ®val); - printf(" Auto Neg ADS Register : 0x%4.4x\n", regval); - ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_AN_PRTN_REG, ®val); - printf(" Auto Neg Partner Ability Register : 0x%4.4x\n", regval); - ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_AN_EXP_REG, ®val); - printf(" Auto Neg Expansion Register : 0x%4.4x\n", regval); - ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_AN_NEXT_REG, ®val); - printf(" Auto Neg Next Register : 0x%4.4x\n", regval); - - return IX_ETH_ACC_SUCCESS; -} - - -/***************************************************************** - * - * Interface query functions - * - */ -IxEthAccStatus -ixEthAccMdioShow (void) -{ - UINT32 regval; - - if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) - { - return (IX_ETH_ACC_FAIL); - } - - ixOsalMutexLock(&miiAccessLock, IX_OSAL_WAIT_FOREVER); - ixEthAccMdioCmdRead(®val); - ixOsalMutexUnlock(&miiAccessLock); - - printf("MDIO command register\n"); - printf(" Go bit : 0x%x\n", (regval & BIT(31)) >> 31); - printf(" MDIO Write : 0x%x\n", (regval & BIT(26)) >> 26); - printf(" PHY address : 0x%x\n", (regval >> 21) & 0x1f); - printf(" Reg address : 0x%x\n", (regval >> 16) & 0x1f); - - ixOsalMutexLock(&miiAccessLock, IX_OSAL_WAIT_FOREVER); - ixEthAccMdioStatusRead(®val); - ixOsalMutexUnlock(&miiAccessLock); - - printf("MDIO status register\n"); - printf(" Read OK : 0x%x\n", (regval & BIT(31)) >> 31); - printf(" Read Data : 0x%x\n", (regval >> 16) & 0xff); - - return IX_ETH_ACC_SUCCESS; -} - diff --git a/drivers/net/npe/IxEthDBAPI.c b/drivers/net/npe/IxEthDBAPI.c deleted file mode 100644 index 023cf50248..0000000000 --- a/drivers/net/npe/IxEthDBAPI.c +++ /dev/null @@ -1,424 +0,0 @@ -/** - * @file IxEthDBAPI.c - * - * @brief Implementation of the public API - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxEthDB_p.h" -#include "IxFeatureCtrl.h" - -extern HashTable dbHashtable; -extern IxEthDBPortMap overflowUpdatePortList; -extern BOOL ixEthDBPortUpdateRequired[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1]; - -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING); - - return ixEthDBTriggerAddPortUpdate(macAddr, portID, true); -} - -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING); - - return ixEthDBTriggerAddPortUpdate(macAddr, portID, false); -} - -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringEntryDelete(IxEthDBMacAddr *macAddr) -{ - HashNode *searchResult; - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS); - - if (searchResult == NULL) - { - return IX_ETH_DB_NO_SUCH_ADDR; /* not found */ - } - - ixEthDBReleaseHashNode(searchResult); - - /* build a remove event and place it on the event queue */ - return ixEthDBTriggerRemovePortUpdate(macAddr, ((MacDescriptor *) searchResult->data)->portID); -} - -IX_ETH_DB_PUBLIC -void ixEthDBDatabaseMaintenance() -{ - HashIterator iterator; - UINT32 portIndex; - BOOL agingRequired = false; - - /* ports who will have deleted records and therefore will need updating */ - IxEthDBPortMap triggerPorts; - - if (IX_FEATURE_CTRL_SWCONFIG_ENABLED != - ixFeatureCtrlSwConfigurationCheck (IX_FEATURECTRL_ETH_LEARNING)) - { - return; - } - - SET_EMPTY_DEPENDENCY_MAP(triggerPorts); - - /* check if there's at least a port that needs aging */ - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - if (ixEthDBPortInfo[portIndex].agingEnabled && ixEthDBPortInfo[portIndex].enabled) - { - agingRequired = true; - } - } - - if (agingRequired) - { - /* ask each NPE port to write back the database for aging inspection */ - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE - && ixEthDBPortInfo[portIndex].agingEnabled - && ixEthDBPortInfo[portIndex].enabled) - { - IxNpeMhMessage message; - IX_STATUS result; - - /* send EDB_GetMACAddressDatabase message */ - FILL_GETMACADDRESSDATABASE(message, - 0 /* unused */, - IX_OSAL_MMU_VIRT_TO_PHYS(ixEthDBPortInfo[portIndex].updateMethod.npeUpdateZone)); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portIndex), message, result); - - if (result == IX_SUCCESS) - { - /* analyze NPE copy */ - ixEthDBNPESyncScan(portIndex, ixEthDBPortInfo[portIndex].updateMethod.npeUpdateZone, FULL_ELT_BYTE_SIZE); - - IX_ETH_DB_SUPPORT_TRACE("DB: (API) Finished scanning NPE tree on port %d\n", portIndex); - } - else - { - ixEthDBPortInfo[portIndex].agingEnabled = false; - ixEthDBPortInfo[portIndex].updateMethod.updateEnabled = false; - ixEthDBPortInfo[portIndex].updateMethod.userControlled = true; - - ixOsalLog(IX_OSAL_LOG_LVL_FATAL, - IX_OSAL_LOG_DEV_STDOUT, - "EthDB: (Maintenance) warning, disabling aging and updates for port %d (assumed dead)\n", - portIndex, 0, 0, 0, 0, 0); - - ixEthDBDatabaseClear(portIndex, IX_ETH_DB_ALL_RECORD_TYPES); - } - } - } - - /* browse database and age entries */ - BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator)); - - while (IS_ITERATOR_VALID(&iterator)) - { - MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data; - UINT32 *age = NULL; - BOOL staticEntry = true; - - if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) - { - age = &descriptor->recordData.filteringData.age; - staticEntry = descriptor->recordData.filteringData.staticEntry; - } - else if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) - { - age = &descriptor->recordData.filteringVlanData.age; - staticEntry = descriptor->recordData.filteringVlanData.staticEntry; - } - else - { - staticEntry = true; - } - - if (ixEthDBPortInfo[descriptor->portID].agingEnabled && (staticEntry == false)) - { - /* manually increment the age if the port has no such capability */ - if ((ixEthDBPortDefinitions[descriptor->portID].capabilities & IX_ETH_ENTRY_AGING) == 0) - { - *age += (IX_ETH_DB_MAINTENANCE_TIME / 60); - } - - /* age entry if it exceeded the maximum time to live */ - if (*age >= (IX_ETH_DB_LEARNING_ENTRY_AGE_TIME / 60)) - { - /* add port to the set of update trigger ports */ - JOIN_PORT_TO_MAP(triggerPorts, descriptor->portID); - - /* delete entry */ - BUSY_RETRY(ixEthDBRemoveEntryAtHashIterator(&dbHashtable, &iterator)); - } - else - { - /* move to the next record */ - BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator)); - } - } - else - { - /* move to the next record */ - BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator)); - } - } - - /* update ports which lost records */ - ixEthDBUpdatePortLearningTrees(triggerPorts); - } -} - -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBDatabaseClear(IxEthDBPortId portID, IxEthDBRecordType recordType) -{ - IxEthDBPortMap triggerPorts; - HashIterator iterator; - - if (portID >= IX_ETH_DB_NUMBER_OF_PORTS && portID != IX_ETH_DB_ALL_PORTS) - { - return IX_ETH_DB_INVALID_PORT; - } - - /* check if the user passes some extra bits */ - if ((recordType | IX_ETH_DB_ALL_RECORD_TYPES) != IX_ETH_DB_ALL_RECORD_TYPES) - { - return IX_ETH_DB_INVALID_ARG; - } - - SET_EMPTY_DEPENDENCY_MAP(triggerPorts); - - /* browse database and age entries */ - BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator)); - - while (IS_ITERATOR_VALID(&iterator)) - { - MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data; - - if (((descriptor->portID == portID) || (portID == IX_ETH_DB_ALL_PORTS)) - && ((descriptor->type & recordType) != 0)) - { - /* add to trigger if automatic updates are required */ - if (ixEthDBPortUpdateRequired[descriptor->type]) - { - /* add port to the set of update trigger ports */ - JOIN_PORT_TO_MAP(triggerPorts, descriptor->portID); - } - - /* delete entry */ - BUSY_RETRY(ixEthDBRemoveEntryAtHashIterator(&dbHashtable, &iterator)); - } - else - { - /* move to the next record */ - BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator)); - } - } - - /* update ports which lost records */ - ixEthDBUpdatePortLearningTrees(triggerPorts); - - return IX_ETH_DB_SUCCESS; -} - -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringPortSearch(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) -{ - HashNode *searchResult; - IxEthDBStatus result = IX_ETH_DB_NO_SUCH_ADDR; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING); - - searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS); - - if (searchResult == NULL) - { - return IX_ETH_DB_NO_SUCH_ADDR; /* not found */ - } - - if (((MacDescriptor *) (searchResult->data))->portID == portID) - { - result = IX_ETH_DB_SUCCESS; /* address and port match */ - } - - ixEthDBReleaseHashNode(searchResult); - - return result; -} - -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringDatabaseSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr) -{ - HashNode *searchResult; - - IX_ETH_DB_CHECK_REFERENCE(portID); - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS); - - if (searchResult == NULL) - { - return IX_ETH_DB_NO_SUCH_ADDR; /* not found */ - } - - /* return the port ID */ - *portID = ((MacDescriptor *) searchResult->data)->portID; - - ixEthDBReleaseHashNode(searchResult); - - return IX_ETH_DB_SUCCESS; -} - -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING); - - ixEthDBPortInfo[portID].agingEnabled = false; - - return IX_ETH_DB_SUCCESS; -} - -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING); - - ixEthDBPortInfo[portID].agingEnabled = true; - - return IX_ETH_DB_SUCCESS; -} - -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringPortUpdatingSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr) -{ - HashNode *searchResult; - MacDescriptor *descriptor; - - IX_ETH_DB_CHECK_REFERENCE(portID); - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS); - - if (searchResult == NULL) - { - return IX_ETH_DB_NO_SUCH_ADDR; /* not found */ - } - - descriptor = (MacDescriptor *) searchResult->data; - - /* return the port ID */ - *portID = descriptor->portID; - - /* reset entry age */ - if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) - { - descriptor->recordData.filteringData.age = 0; - } - else - { - descriptor->recordData.filteringVlanData.age = 0; - } - - ixEthDBReleaseHashNode(searchResult); - - return IX_ETH_DB_SUCCESS; -} - -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortDependencyMapSet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(dependencyPortMap); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FILTERING); - - /* force bit at offset 255 to 0 (reserved) */ - dependencyPortMap[31] &= 0xFE; - - COPY_DEPENDENCY_MAP(ixEthDBPortInfo[portID].dependencyPortMap, dependencyPortMap); - - return IX_ETH_DB_SUCCESS; -} - -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortDependencyMapGet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(dependencyPortMap); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FILTERING); - - COPY_DEPENDENCY_MAP(dependencyPortMap, ixEthDBPortInfo[portID].dependencyPortMap); - - return IX_ETH_DB_SUCCESS; -} - -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortUpdateEnableSet(IxEthDBPortId portID, BOOL enableUpdate) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FILTERING); - - ixEthDBPortInfo[portID].updateMethod.updateEnabled = enableUpdate; - ixEthDBPortInfo[portID].updateMethod.userControlled = true; - - return IX_ETH_DB_SUCCESS; -} diff --git a/drivers/net/npe/IxEthDBAPISupport.c b/drivers/net/npe/IxEthDBAPISupport.c deleted file mode 100644 index c265d942e0..0000000000 --- a/drivers/net/npe/IxEthDBAPISupport.c +++ /dev/null @@ -1,651 +0,0 @@ -/** - * @file IxEthDBAPISupport.c - * - * @brief Public API support functions - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include -#include -#include - -#include "IxEthDB_p.h" -#include "IxEthDBMessages_p.h" -#include "IxEthDB_p.h" -#include "IxEthDBLog_p.h" - -#ifdef IX_UNIT_TEST - -int dbAccessCounter = 0; -int overflowEvent = 0; - -#endif - -/* - * External declaration - */ -extern HashTable dbHashtable; - -/* - * Internal declaration - */ -IX_ETH_DB_PUBLIC -PortInfo ixEthDBPortInfo[IX_ETH_DB_NUMBER_OF_PORTS]; - -IX_ETH_DB_PRIVATE -struct -{ - BOOL saved; - IxEthDBPriorityTable priorityTable; - IxEthDBVlanSet vlanMembership; - IxEthDBVlanSet transmitTaggingInfo; - IxEthDBFrameFilter frameFilter; - IxEthDBTaggingAction taggingAction; - IxEthDBFirewallMode firewallMode; - BOOL stpBlocked; - BOOL srcAddressFilterEnabled; - UINT32 maxRxFrameSize; - UINT32 maxTxFrameSize; -} ixEthDBPortState[IX_ETH_DB_NUMBER_OF_PORTS]; - -#define IX_ETH_DB_DEFAULT_FRAME_SIZE (1518) - -/** - * @brief initializes a port - * - * @param portID ID of the port to be initialized - * - * Note that redundant initializations are silently - * dealt with and do not constitute an error - * - * This function is fully documented in the main - * header file, IxEthDB.h - */ -IX_ETH_DB_PUBLIC -void ixEthDBPortInit(IxEthDBPortId portID) -{ - PortInfo *portInfo; - - if (portID >= IX_ETH_DB_NUMBER_OF_PORTS) - { - return; - } - - portInfo = &ixEthDBPortInfo[portID]; - - if (ixEthDBSingleEthNpeCheck(portID) != IX_ETH_DB_SUCCESS) - { - WARNING_LOG("EthDB: Unavailable Eth %d: Cannot initialize EthDB Port.\n", (UINT32) portID); - - return; - } - - if (portInfo->initialized) - { - /* redundant */ - return; - } - - /* initialize core fields */ - portInfo->portID = portID; - SET_DEPENDENCY_MAP(portInfo->dependencyPortMap, portID); - - /* default values */ - portInfo->agingEnabled = false; - portInfo->enabled = false; - portInfo->macAddressUploaded = false; - portInfo->maxRxFrameSize = IX_ETHDB_DEFAULT_FRAME_SIZE; - portInfo->maxTxFrameSize = IX_ETHDB_DEFAULT_FRAME_SIZE; - - /* default update control values */ - portInfo->updateMethod.searchTree = NULL; - portInfo->updateMethod.searchTreePendingWrite = false; - portInfo->updateMethod.treeInitialized = false; - portInfo->updateMethod.updateEnabled = false; - portInfo->updateMethod.userControlled = false; - - /* default WiFi parameters */ - memset(portInfo->bbsid, 0, sizeof (portInfo->bbsid)); - portInfo->frameControlDurationID = 0; - - /* Ethernet NPE-specific initializations */ - if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) - { - /* update handler */ - portInfo->updateMethod.updateHandler = ixEthDBNPEUpdateHandler; - } - - /* initialize state save */ - ixEthDBPortState[portID].saved = false; - - portInfo->initialized = true; -} - -/** - * @brief enables a port - * - * @param portID ID of the port to enable - * - * This function is fully documented in the main - * header file, IxEthDB.h - * - * @return IX_ETH_DB_SUCCESS if enabling was - * accomplished, or a meaningful error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID) -{ - IxEthDBPortMap triggerPorts; - PortInfo *portInfo; - - IX_ETH_DB_CHECK_PORT_EXISTS(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - portInfo = &ixEthDBPortInfo[portID]; - - if (portInfo->enabled) - { - /* redundant */ - return IX_ETH_DB_SUCCESS; - } - - SET_DEPENDENCY_MAP(triggerPorts, portID); - - /* mark as enabled */ - portInfo->enabled = true; - - /* Operation stops here when Ethernet Learning is not enabled */ - if(IX_FEATURE_CTRL_SWCONFIG_DISABLED == - ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING)) - { - return IX_ETH_DB_SUCCESS; - } - - if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE && !portInfo->macAddressUploaded) - { - IX_ETH_DB_SUPPORT_TRACE("DB: (Support) MAC address not set on port %d, enable failed\n", portID); - - /* must use UnicastAddressSet() before enabling an NPE port */ - return IX_ETH_DB_MAC_UNINITIALIZED; - } - - if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) - { - IX_ETH_DB_SUPPORT_TRACE("DB: (Support) Attempting to enable the NPE callback for port %d...\n", portID); - - if (!portInfo->updateMethod.userControlled - && ((portInfo->featureCapability & IX_ETH_DB_FILTERING) != 0)) - { - portInfo->updateMethod.updateEnabled = true; - } - - /* if this is first time initialization then we already have - write access to the tree and can AccessRelease directly */ - if (!portInfo->updateMethod.treeInitialized) - { - IX_ETH_DB_SUPPORT_TRACE("DB: (Support) Initializing tree for port %d\n", portID); - - /* create an initial tree and release access into it */ - ixEthDBUpdatePortLearningTrees(triggerPorts); - - /* mark tree as being initialized */ - portInfo->updateMethod.treeInitialized = true; - } - } - - if (ixEthDBPortState[portID].saved) - { - /* previous configuration data stored, restore state */ - if ((portInfo->featureCapability & IX_ETH_DB_FIREWALL) != 0) - { - ixEthDBFirewallModeSet(portID, ixEthDBPortState[portID].firewallMode); - ixEthDBFirewallInvalidAddressFilterEnable(portID, ixEthDBPortState[portID].srcAddressFilterEnabled); - } - -#if 0 /* test-only */ - if ((portInfo->featureCapability & IX_ETH_DB_VLAN_QOS) != 0) - { - ixEthDBAcceptableFrameTypeSet(portID, ixEthDBPortState[portID].frameFilter); - ixEthDBIngressVlanTaggingEnabledSet(portID, ixEthDBPortState[portID].taggingAction); - - ixEthDBEgressVlanTaggingEnabledSet(portID, ixEthDBPortState[portID].transmitTaggingInfo); - ixEthDBPortVlanMembershipSet(portID, ixEthDBPortState[portID].vlanMembership); - - ixEthDBPriorityMappingTableSet(portID, ixEthDBPortState[portID].priorityTable); - } -#endif - - if ((portInfo->featureCapability & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0) - { - ixEthDBSpanningTreeBlockingStateSet(portID, ixEthDBPortState[portID].stpBlocked); - } - - ixEthDBFilteringPortMaximumRxFrameSizeSet(portID, ixEthDBPortState[portID].maxRxFrameSize); - ixEthDBFilteringPortMaximumTxFrameSizeSet(portID, ixEthDBPortState[portID].maxTxFrameSize); - - /* discard previous save */ - ixEthDBPortState[portID].saved = false; - } - - IX_ETH_DB_SUPPORT_TRACE("DB: (Support) Enabling succeeded for port %d\n", portID); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief disables a port - * - * @param portID ID of the port to disable - * - * This function is fully documented in the - * main header file, IxEthDB.h - * - * @return IX_ETH_DB_SUCCESS if disabling was - * successful or an appropriate error message - * otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID) -{ - HashIterator iterator; - IxEthDBPortMap triggerPorts; /* ports who will have deleted records and therefore will need updating */ - BOOL result; - PortInfo *portInfo; - IxEthDBFeature learningEnabled; -#if 0 /* test-only */ - IxEthDBPriorityTable classZeroTable; -#endif - - IX_ETH_DB_CHECK_PORT_EXISTS(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - portInfo = &ixEthDBPortInfo[portID]; - - if (!portInfo->enabled) - { - /* redundant */ - return IX_ETH_DB_SUCCESS; - } - - if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) - { - /* save filtering state */ - ixEthDBPortState[portID].firewallMode = portInfo->firewallMode; - ixEthDBPortState[portID].frameFilter = portInfo->frameFilter; - ixEthDBPortState[portID].taggingAction = portInfo->taggingAction; - ixEthDBPortState[portID].stpBlocked = portInfo->stpBlocked; - ixEthDBPortState[portID].srcAddressFilterEnabled = portInfo->srcAddressFilterEnabled; - ixEthDBPortState[portID].maxRxFrameSize = portInfo->maxRxFrameSize; - ixEthDBPortState[portID].maxTxFrameSize = portInfo->maxTxFrameSize; - - memcpy(ixEthDBPortState[portID].vlanMembership, portInfo->vlanMembership, sizeof (IxEthDBVlanSet)); - memcpy(ixEthDBPortState[portID].transmitTaggingInfo, portInfo->transmitTaggingInfo, sizeof (IxEthDBVlanSet)); - memcpy(ixEthDBPortState[portID].priorityTable, portInfo->priorityTable, sizeof (IxEthDBPriorityTable)); - - ixEthDBPortState[portID].saved = true; - - /* now turn off all EthDB filtering features on the port */ - -#if 0 /* test-only */ - /* VLAN & QoS */ - if ((portInfo->featureCapability & IX_ETH_DB_VLAN_QOS) != 0) - { - ixEthDBPortVlanMembershipRangeAdd((IxEthDBPortId) portID, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID); - ixEthDBEgressVlanRangeTaggingEnabledSet((IxEthDBPortId) portID, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID, false); - ixEthDBAcceptableFrameTypeSet((IxEthDBPortId) portID, IX_ETH_DB_ACCEPT_ALL_FRAMES); - ixEthDBIngressVlanTaggingEnabledSet((IxEthDBPortId) portID, IX_ETH_DB_PASS_THROUGH); - - memset(classZeroTable, 0, sizeof (classZeroTable)); - ixEthDBPriorityMappingTableSet((IxEthDBPortId) portID, classZeroTable); - } -#endif - - /* STP */ - if ((portInfo->featureCapability & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0) - { - ixEthDBSpanningTreeBlockingStateSet((IxEthDBPortId) portID, false); - } - - /* Firewall */ - if ((portInfo->featureCapability & IX_ETH_DB_FIREWALL) != 0) - { - ixEthDBFirewallModeSet((IxEthDBPortId) portID, IX_ETH_DB_FIREWALL_BLACK_LIST); - ixEthDBFirewallTableDownload((IxEthDBPortId) portID); - ixEthDBFirewallInvalidAddressFilterEnable((IxEthDBPortId) portID, false); - } - - /* Frame size filter */ - ixEthDBFilteringPortMaximumFrameSizeSet((IxEthDBPortId) portID, IX_ETH_DB_DEFAULT_FRAME_SIZE); - - /* WiFi */ - if ((portInfo->featureCapability & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0) - { - ixEthDBWiFiConversionTableDownload((IxEthDBPortId) portID); - } - - /* save and disable the learning feature bit */ - learningEnabled = portInfo->featureStatus & IX_ETH_DB_LEARNING; - portInfo->featureStatus &= ~IX_ETH_DB_LEARNING; - } - else - { - /* save the learning feature bit */ - learningEnabled = portInfo->featureStatus & IX_ETH_DB_LEARNING; - } - - SET_EMPTY_DEPENDENCY_MAP(triggerPorts); - - ixEthDBUpdateLock(); - - /* wipe out current entries for this port */ - BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator)); - - while (IS_ITERATOR_VALID(&iterator)) - { - MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data; - - /* check if the port match. If so, remove the entry */ - if (descriptor->portID == portID - && (descriptor->type == IX_ETH_DB_FILTERING_RECORD || descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) - && !descriptor->recordData.filteringData.staticEntry) - { - /* delete entry */ - BUSY_RETRY(ixEthDBRemoveEntryAtHashIterator(&dbHashtable, &iterator)); - - /* add port to the set of update trigger ports */ - JOIN_PORT_TO_MAP(triggerPorts, portID); - } - else - { - /* move to the next record */ - BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator)); - } - } - - if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) - { - if (portInfo->updateMethod.searchTree != NULL) - { - ixEthDBFreeMacTreeNode(portInfo->updateMethod.searchTree); - portInfo->updateMethod.searchTree = NULL; - } - - ixEthDBNPEUpdateHandler(portID, IX_ETH_DB_FILTERING_RECORD); - } - - /* mark as disabled */ - portInfo->enabled = false; - - /* disable updates unless the user has specifically altered the default behavior */ - if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) - { - if (!portInfo->updateMethod.userControlled) - { - portInfo->updateMethod.updateEnabled = false; - } - - /* make sure we re-initialize the NPE learning tree when the port is re-enabled */ - portInfo->updateMethod.treeInitialized = false; - } - - ixEthDBUpdateUnlock(); - - /* restore learning feature bit */ - portInfo->featureStatus |= learningEnabled; - - /* if we've removed any records or lost any events make sure to force an update */ - IS_EMPTY_DEPENDENCY_MAP(result, triggerPorts); - - if (!result) - { - ixEthDBUpdatePortLearningTrees(triggerPorts); - } - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief sends the updated maximum Tx/Rx frame lengths to the NPE - * - * @param portID ID of the port to update - * - * @return IX_ETH_DB_SUCCESS if the update completed - * successfully or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBPortFrameLengthsUpdate(IxEthDBPortId portID) -{ - IxNpeMhMessage message; - PortInfo *portInfo = &ixEthDBPortInfo[portID]; - IX_STATUS result; - - FILL_SETMAXFRAMELENGTHS_MSG(message, portID, portInfo->maxRxFrameSize, portInfo->maxTxFrameSize); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief sets the port maximum Rx frame size - * - * @param portID ID of the port to set the frame size on - * @param maximumRxFrameSize maximum Rx frame size - * - * This function updates the internal data structures and - * calls ixEthDBPortFrameLengthsUpdate() for NPE update. - * - * This function is fully documented in the main header - * file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation was - * successfull or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringPortMaximumRxFrameSizeSet(IxEthDBPortId portID, UINT32 maximumRxFrameSize) -{ - IX_ETH_DB_CHECK_PORT_EXISTS(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - if (!ixEthDBPortInfo[portID].initialized) - { - return IX_ETH_DB_PORT_UNINITIALIZED; - } - - if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) - { - if ((maximumRxFrameSize < IX_ETHDB_MIN_NPE_FRAME_SIZE) || - (maximumRxFrameSize > IX_ETHDB_MAX_NPE_FRAME_SIZE)) - { - return IX_ETH_DB_INVALID_ARG; - } - } - else - { - return IX_ETH_DB_NO_PERMISSION; - } - - /* update internal structure */ - ixEthDBPortInfo[portID].maxRxFrameSize = maximumRxFrameSize; - - /* update the maximum frame size in the NPE */ - return ixEthDBPortFrameLengthsUpdate(portID); -} - -/** - * @brief sets the port maximum Tx frame size - * - * @param portID ID of the port to set the frame size on - * @param maximumTxFrameSize maximum Tx frame size - * - * This function updates the internal data structures and - * calls ixEthDBPortFrameLengthsUpdate() for NPE update. - * - * This function is fully documented in the main header - * file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation was - * successfull or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringPortMaximumTxFrameSizeSet(IxEthDBPortId portID, UINT32 maximumTxFrameSize) -{ - IX_ETH_DB_CHECK_PORT_EXISTS(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - if (!ixEthDBPortInfo[portID].initialized) - { - return IX_ETH_DB_PORT_UNINITIALIZED; - } - - if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) - { - if ((maximumTxFrameSize < IX_ETHDB_MIN_NPE_FRAME_SIZE) || - (maximumTxFrameSize > IX_ETHDB_MAX_NPE_FRAME_SIZE)) - { - return IX_ETH_DB_INVALID_ARG; - } - } - else - { - return IX_ETH_DB_NO_PERMISSION; - } - - /* update internal structure */ - ixEthDBPortInfo[portID].maxTxFrameSize = maximumTxFrameSize; - - /* update the maximum frame size in the NPE */ - return ixEthDBPortFrameLengthsUpdate(portID); -} - -/** - * @brief sets the port maximum Tx and Rx frame sizes - * - * @param portID ID of the port to set the frame size on - * @param maximumFrameSize maximum Tx and Rx frame sizes - * - * This function updates the internal data structures and - * calls ixEthDBPortFrameLengthsUpdate() for NPE update. - * - * Note that both the maximum Tx and Rx frame size are set - * to the same value. This function is kept for compatibility - * reasons. - * - * This function is fully documented in the main header - * file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation was - * successfull or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringPortMaximumFrameSizeSet(IxEthDBPortId portID, UINT32 maximumFrameSize) -{ - IX_ETH_DB_CHECK_PORT_EXISTS(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - if (!ixEthDBPortInfo[portID].initialized) - { - return IX_ETH_DB_PORT_UNINITIALIZED; - } - - if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) - { - if ((maximumFrameSize < IX_ETHDB_MIN_NPE_FRAME_SIZE) || - (maximumFrameSize > IX_ETHDB_MAX_NPE_FRAME_SIZE)) - { - return IX_ETH_DB_INVALID_ARG; - } - } - else - { - return IX_ETH_DB_NO_PERMISSION; - } - - /* update internal structure */ - ixEthDBPortInfo[portID].maxRxFrameSize = maximumFrameSize; - ixEthDBPortInfo[portID].maxTxFrameSize = maximumFrameSize; - - /* update the maximum frame size in the NPE */ - return ixEthDBPortFrameLengthsUpdate(portID); -} - -/** - * @brief sets the MAC address of an NPE port - * - * @param portID port ID to set the MAC address on - * @param macAddr pointer to the 6-byte MAC address - * - * This function is called by the EthAcc - * ixEthAccUnicastMacAddressSet() and should not be - * manually invoked unless required by special circumstances. - * - * @return IX_ETH_DB_SUCCESS if the operation succeeded - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) -{ - IxNpeMhMessage message; - IX_STATUS result; - - /* use this macro instead CHECK_PORT - as the port doesn't need to be enabled */ - IX_ETH_DB_CHECK_PORT_EXISTS(portID); - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - if (!ixEthDBPortInfo[portID].initialized) - { - return IX_ETH_DB_PORT_UNINITIALIZED; - } - - /* Operation stops here when Ethernet Learning is not enabled */ - if(IX_FEATURE_CTRL_SWCONFIG_DISABLED == - ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING)) - { - return IX_ETH_DB_SUCCESS; - } - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - /* exit if the port is not an Ethernet NPE */ - if (ixEthDBPortDefinitions[portID].type != IX_ETH_NPE) - { - return IX_ETH_DB_INVALID_PORT; - } - - /* populate message */ - FILL_SETPORTADDRESS_MSG(message, portID, macAddr->macAddress); - - IX_ETH_DB_SUPPORT_TRACE("DB: (Support) Sending SetPortAddress on port %d...\n", portID); - - /* send a SetPortAddress message */ - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - if (result == IX_SUCCESS) - { - ixEthDBPortInfo[portID].macAddressUploaded = true; - } - - return result; -} diff --git a/drivers/net/npe/IxEthDBCore.c b/drivers/net/npe/IxEthDBCore.c deleted file mode 100644 index 3d3050d5ce..0000000000 --- a/drivers/net/npe/IxEthDBCore.c +++ /dev/null @@ -1,439 +0,0 @@ -/** - * @file IxEthDBDBCore.c - * - * @brief Database support functions - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxEthDB_p.h" - -/* list of database hashtables */ -IX_ETH_DB_PUBLIC HashTable dbHashtable; -IX_ETH_DB_PUBLIC MatchFunction matchFunctions[IX_ETH_DB_MAX_KEY_INDEX + 1]; -IX_ETH_DB_PUBLIC BOOL ixEthDBPortUpdateRequired[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1]; -IX_ETH_DB_PUBLIC UINT32 ixEthDBKeyType[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1]; - -/* private initialization flag */ -IX_ETH_DB_PRIVATE BOOL ethDBInitializationComplete = false; - -/** - * @brief initializes EthDB - * - * This function must be called to initialize the component. - * - * It does the following things: - * - checks the port definition structure - * - scans the capabilities of the NPE images and sets the - * capabilities of the ports accordingly - * - initializes the memory pools internally used in EthDB - * for storing database records and handling data - * - registers automatic update handlers for add and remove - * operations - * - registers hashing match functions, depending on key sets - * - initializes the main database hashtable - * - allocates contiguous memory zones to be used for NPE - * updates - * - registers the serialize methods used to convert data - * into NPE-readable format - * - starts the event processor - * - * Note that this function is documented in the public - * component header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS or an appropriate error if the - * component failed to initialize correctly - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBInit(void) -{ - IxEthDBStatus result; - - if (ethDBInitializationComplete) - { - /* redundant */ - return IX_ETH_DB_SUCCESS; - } - - /* trap an invalid port definition structure */ - IX_ETH_DB_PORTS_ASSERTION; - - /* memory management */ - ixEthDBInitMemoryPools(); - - /* register hashing search methods */ - ixEthDBMatchMethodsRegister(matchFunctions); - - /* register type-based automatic port updates */ - ixEthDBUpdateTypeRegister(ixEthDBPortUpdateRequired); - - /* register record to key type mappings */ - ixEthDBKeyTypeRegister(ixEthDBKeyType); - - /* hash table */ - ixEthDBInitHash(&dbHashtable, NUM_BUCKETS, ixEthDBEntryXORHash, matchFunctions, (FreeFunction) ixEthDBFreeMacDescriptor); - - /* NPE update zones */ - ixEthDBNPEUpdateAreasInit(); - - /* register record serialization methods */ - ixEthDBRecordSerializeMethodsRegister(); - - /* start the event processor */ - result = ixEthDBEventProcessorInit(); - - /* scan NPE features */ - if (result == IX_ETH_DB_SUCCESS) - { - ixEthDBFeatureCapabilityScan(); - } - - ethDBInitializationComplete = true; - - return result; -} - -/** - * @brief prepares EthDB for unloading - * - * This function must be called before removing the - * EthDB component from memory (e.g. doing rmmod in - * Linux) if the component is to be re-initialized again - * without rebooting the platform. - * - * All the EthDB ports must be disabled before this - * function is to be called. Failure to disable all - * the ports will return the IX_ETH_DB_BUSY error. - * - * This function will destroy mutexes, deallocate - * memory and stop the event processor. - * - * Note that this function is fully documented in the - * main component header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if de-initialization - * completed successfully or an appropriate error - * message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBUnload(void) -{ - IxEthDBPortId portIndex; - - if (!ethDBInitializationComplete) - { - /* redundant */ - return IX_ETH_DB_SUCCESS; - } - - /* check if any ports are enabled */ - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - if (ixEthDBPortInfo[portIndex].enabled) - { - return IX_ETH_DB_BUSY; - } - } - - /* free port resources */ - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE) - { - ixOsalMutexDestroy(&ixEthDBPortInfo[portIndex].npeAckLock); - } - - ixEthDBPortInfo[portIndex].initialized = false; - } - - /* shutdown event processor */ - ixEthDBStopLearningFunction(); - - /* deallocate NPE update zones */ - ixEthDBNPEUpdateAreasUnload(); - - ethDBInitializationComplete = false; - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief adds a new entry to the Ethernet database - * - * @param newRecordTemplate address of the record template to use - * @param updateTrigger port map containing the update triggers - * resulting from this update operation - * - * Creates a new database entry, populates it with the data - * copied from the given template and adds the record to the - * database hash table. - * It also checks whether the new record type is registered to trigger - * automatic updates; if it is, the update trigger will contain the - * port on which the record insertion was performed, as well as the - * old port in case the addition was a record migration (from one port - * to the other). The caller can use the updateTrigger to trigger - * automatic updates on the ports changed as a result of this addition. - * - * @retval IX_ETH_DB_SUCCESS addition successful - * @retval IX_ETH_DB_NOMEM insertion failed, no memory left in the mac descriptor memory pool - * @retval IX_ETH_DB_BUSY database busy, cannot insert due to locking - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBAdd(MacDescriptor *newRecordTemplate, IxEthDBPortMap updateTrigger) -{ - IxEthDBStatus result; - MacDescriptor *newDescriptor; - IxEthDBPortId originalPortID; - HashNode *node = NULL; - - BUSY_RETRY(ixEthDBSearchHashEntry(&dbHashtable, ixEthDBKeyType[newRecordTemplate->type], newRecordTemplate, &node)); - - TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER; - - if (node == NULL) - { - /* not found, create a new one */ - newDescriptor = ixEthDBAllocMacDescriptor(); - - if (newDescriptor == NULL) - { - return IX_ETH_DB_NOMEM; /* no memory */ - } - - /* old port does not exist, avoid unnecessary updates */ - originalPortID = newRecordTemplate->portID; - } - else - { - /* a node with the same key exists, will update node */ - newDescriptor = (MacDescriptor *) node->data; - - /* save original port id */ - originalPortID = newDescriptor->portID; - } - - /* copy/update fields into new record */ - memcpy(newDescriptor->macAddress, newRecordTemplate->macAddress, sizeof (IxEthDBMacAddr)); - memcpy(&newDescriptor->recordData, &newRecordTemplate->recordData, sizeof (IxEthDBRecordData)); - - newDescriptor->type = newRecordTemplate->type; - newDescriptor->portID = newRecordTemplate->portID; - newDescriptor->user = newRecordTemplate->user; - - if (node == NULL) - { - /* new record, insert into hashtable */ - BUSY_RETRY_WITH_RESULT(ixEthDBAddHashEntry(&dbHashtable, newDescriptor), result); - - if (result != IX_ETH_DB_SUCCESS) - { - ixEthDBFreeMacDescriptor(newDescriptor); - - return result; /* insertion failed */ - } - } - - if (node != NULL) - { - /* release access */ - ixEthDBReleaseHashNode(node); - } - - /* trigger add/remove update if required by type */ - if (updateTrigger != NULL && - ixEthDBPortUpdateRequired[newRecordTemplate->type]) - { - /* add new port to update list */ - JOIN_PORT_TO_MAP(updateTrigger, newRecordTemplate->portID); - - /* check if record has moved, we'll need to update the old port as well */ - if (originalPortID != newDescriptor->portID) - { - JOIN_PORT_TO_MAP(updateTrigger, originalPortID); - } - } - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief remove a record from the Ethernet database - * - * @param templateRecord template record used to determine - * what record is to be removed - * @param updateTrigger port map containing the update triggers - * resulting from this update operation - * - * This function will examine the template record it receives - * and attempts to delete a record of the same type and containing - * the same keys as the template record. If deletion is successful - * and the record type is registered for automatic port updates the - * port will also be set in the updateTrigger port map, so that the - * client can perform an update of the port. - * - * @retval IX_ETH_DB_SUCCESS removal was successful - * @retval IX_ETH_DB_NO_SUCH_ADDR the record with the given MAC address was not found - * @retval IX_ETH_DB_BUSY database busy, cannot remove due to locking - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBRemove(MacDescriptor *templateRecord, IxEthDBPortMap updateTrigger) -{ - IxEthDBStatus result; - - TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER; - - BUSY_RETRY_WITH_RESULT(ixEthDBRemoveHashEntry(&dbHashtable, ixEthDBKeyType[templateRecord->type], templateRecord), result); - - if (result != IX_ETH_DB_SUCCESS) - { - return IX_ETH_DB_NO_SUCH_ADDR; /* not found */ - } - - /* trigger add/remove update if required by type */ - if (updateTrigger != NULL - &&ixEthDBPortUpdateRequired[templateRecord->type]) - { - /* add new port to update list */ - JOIN_PORT_TO_MAP(updateTrigger, templateRecord->portID); - } - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief register record key types - * - * This function registers the appropriate key types, - * depending on record types. - * - * All filtering records use the MAC address as the key. - * WiFi and Firewall records use a compound key consisting - * in both the MAC address and the port ID. - * - * @return the number of registered record types - */ -IX_ETH_DB_PUBLIC -UINT32 ixEthDBKeyTypeRegister(UINT32 *keyType) -{ - /* safety */ - memset(keyType, 0, sizeof (keyType)); - - /* register all known record types */ - keyType[IX_ETH_DB_FILTERING_RECORD] = IX_ETH_DB_MAC_KEY; - keyType[IX_ETH_DB_FILTERING_VLAN_RECORD] = IX_ETH_DB_MAC_KEY; - keyType[IX_ETH_DB_ALL_FILTERING_RECORDS] = IX_ETH_DB_MAC_KEY; - keyType[IX_ETH_DB_WIFI_RECORD] = IX_ETH_DB_MAC_PORT_KEY; - keyType[IX_ETH_DB_FIREWALL_RECORD] = IX_ETH_DB_MAC_PORT_KEY; - - return 5; -} - -/** - * @brief Sets a user-defined field into a database record - * - * Note that this function is fully documented in the main component - * header file. - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBUserFieldSet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void *field) -{ - HashNode *result = NULL; - - if (macAddr == NULL) - { - return IX_ETH_DB_INVALID_ARG; - } - - if (recordType == IX_ETH_DB_FILTERING_RECORD) - { - result = ixEthDBSearch(macAddr, recordType); - } - else if (recordType == IX_ETH_DB_FILTERING_VLAN_RECORD) - { - result = ixEthDBVlanSearch(macAddr, vlanID, recordType); - } - else if (recordType == IX_ETH_DB_WIFI_RECORD || recordType == IX_ETH_DB_FIREWALL_RECORD) - { - IX_ETH_DB_CHECK_PORT_EXISTS(portID); - - result = ixEthDBPortSearch(macAddr, portID, recordType); - } - else - { - return IX_ETH_DB_INVALID_ARG; - } - - if (result == NULL) - { - return IX_ETH_DB_NO_SUCH_ADDR; - } - - ((MacDescriptor *) result->data)->user = field; - - ixEthDBReleaseHashNode(result); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief Retrieves a user-defined field from a database record - * - * Note that this function is fully documented in the main component - * header file. - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBUserFieldGet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void **field) -{ - HashNode *result = NULL; - - if (macAddr == NULL || field == NULL) - { - return IX_ETH_DB_INVALID_ARG; - } - - if (recordType == IX_ETH_DB_FILTERING_RECORD) - { - result = ixEthDBSearch(macAddr, recordType); - } - else if (recordType == IX_ETH_DB_FILTERING_VLAN_RECORD) - { - result = ixEthDBVlanSearch(macAddr, vlanID, recordType); - } - else if (recordType == IX_ETH_DB_WIFI_RECORD || recordType == IX_ETH_DB_FIREWALL_RECORD) - { - IX_ETH_DB_CHECK_PORT_EXISTS(portID); - - result = ixEthDBPortSearch(macAddr, portID, recordType); - } - else - { - return IX_ETH_DB_INVALID_ARG; - } - - if (result == NULL) - { - return IX_ETH_DB_NO_SUCH_ADDR; - } - - *field = ((MacDescriptor *) result->data)->user; - - ixEthDBReleaseHashNode(result); - - return IX_ETH_DB_SUCCESS; -} diff --git a/drivers/net/npe/IxEthDBEvents.c b/drivers/net/npe/IxEthDBEvents.c deleted file mode 100644 index 5b3be0b6c1..0000000000 --- a/drivers/net/npe/IxEthDBEvents.c +++ /dev/null @@ -1,496 +0,0 @@ -/** - * @file IxEthDBEvents.c - * - * @brief Implementation of the event processor component - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include -#include - -#include "IxEthDB_p.h" - -/* forward prototype declarations */ -IX_ETH_DB_PUBLIC void ixEthDBEventProcessorLoop(void *); -IX_ETH_DB_PUBLIC void ixEthDBNPEEventCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg); -IX_ETH_DB_PRIVATE void ixEthDBProcessEvent(PortEvent *local_event, IxEthDBPortMap triggerPorts); -IX_ETH_DB_PRIVATE IxEthDBStatus ixEthDBTriggerPortUpdate(UINT32 eventType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, BOOL staticEntry); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBStartLearningFunction(void); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBStopLearningFunction(void); - -/* data */ -IX_ETH_DB_PRIVATE IxOsalSemaphore eventQueueSemaphore; -IX_ETH_DB_PRIVATE PortEventQueue eventQueue; -IX_ETH_DB_PRIVATE IxOsalMutex eventQueueLock; -IX_ETH_DB_PRIVATE IxOsalMutex portUpdateLock; - -IX_ETH_DB_PRIVATE BOOL ixEthDBLearningShutdown = false; -IX_ETH_DB_PRIVATE BOOL ixEthDBEventProcessorRunning = false; - -/* imported data */ -extern HashTable dbHashtable; - -/** - * @brief initializes the event processor - * - * Initializes the event processor queue and processing thread. - * Called from ixEthDBInit() DB-subcomponent master init function. - * - * @warning do not call directly - * - * @retval IX_ETH_DB_SUCCESS initialization was successful - * @retval IX_ETH_DB_FAIL initialization failed (OSAL or mutex init failure) - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEventProcessorInit(void) -{ - if (ixOsalMutexInit(&portUpdateLock) != IX_SUCCESS) - { - return IX_ETH_DB_FAIL; - } - - if (ixOsalMutexInit(&eventQueueLock) != IX_SUCCESS) - { - return IX_ETH_DB_FAIL; - } - - if (IX_FEATURE_CTRL_SWCONFIG_ENABLED == - ixFeatureCtrlSwConfigurationCheck (IX_FEATURECTRL_ETH_LEARNING)) - { - - /* start processor loop thread */ - if (ixEthDBStartLearningFunction() != IX_ETH_DB_SUCCESS) - { - return IX_ETH_DB_FAIL; - } - } - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief initializes the event queue and the event processor - * - * This function is called by the component initialization - * function, ixEthDBInit(). - * - * @warning do not call directly - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or IX_ETH_DB_FAIL otherwise - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBStartLearningFunction(void) -{ - IxOsalThread eventProcessorThread; - IxOsalThreadAttr threadAttr; - - threadAttr.name = "EthDB event thread"; - threadAttr.stackSize = 32 * 1024; /* 32kbytes */ - threadAttr.priority = 128; - - /* reset event queue */ - ixOsalMutexLock(&eventQueueLock, IX_OSAL_WAIT_FOREVER); - - RESET_QUEUE(&eventQueue); - - ixOsalMutexUnlock(&eventQueueLock); - - /* init event queue semaphore */ - if (ixOsalSemaphoreInit(&eventQueueSemaphore, 0) != IX_SUCCESS) - { - return IX_ETH_DB_FAIL; - } - - ixEthDBLearningShutdown = false; - - /* create processor loop thread */ - if (ixOsalThreadCreate(&eventProcessorThread, &threadAttr, ixEthDBEventProcessorLoop, NULL) != IX_SUCCESS) - { - return IX_ETH_DB_FAIL; - } - - /* start event processor */ - ixOsalThreadStart(&eventProcessorThread); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief stops the event processor - * - * Stops the event processor and frees the event queue semaphore - * Called by the component de-initialization function, ixEthDBUnload() - * - * @warning do not call directly - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or IX_ETH_DB_FAIL otherwise; - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBStopLearningFunction(void) -{ - ixEthDBLearningShutdown = true; - - /* wake up event processing loop to actually process the shutdown event */ - ixOsalSemaphorePost(&eventQueueSemaphore); - - if (ixOsalSemaphoreDestroy(&eventQueueSemaphore) != IX_SUCCESS) - { - return IX_ETH_DB_FAIL; - } - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief default NPE event processing callback - * - * @param npeID ID of the NPE that generated the event - * @param msg NPE message (encapsulated event) - * - * Creates an event object on the Ethernet event processor queue - * and signals the new event by incrementing the event queue semaphore. - * Events are processed by @ref ixEthDBEventProcessorLoop() which runs - * at user level. - * - * @see ixEthDBEventProcessorLoop() - * - * @warning do not call directly - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBNPEEventCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg) -{ - PortEvent *local_event; - - IX_ETH_DB_IRQ_EVENTS_TRACE("DB: (Events) new event received by processor callback from port %d, id 0x%X\n", IX_ETH_DB_NPE_TO_PORT_ID(npeID), NPE_MSG_ID(msg), 0, 0, 0, 0); - - if (CAN_ENQUEUE(&eventQueue)) - { - TEST_FIXTURE_LOCK_EVENT_QUEUE; - - local_event = QUEUE_HEAD(&eventQueue); - - /* create event structure on queue */ - local_event->eventType = NPE_MSG_ID(msg); - local_event->portID = IX_ETH_DB_NPE_TO_PORT_ID(npeID); - - /* update queue */ - PUSH_UPDATE_QUEUE(&eventQueue); - - TEST_FIXTURE_UNLOCK_EVENT_QUEUE; - - IX_ETH_DB_IRQ_EVENTS_TRACE("DB: (Events) Waking up main processor loop...\n", 0, 0, 0, 0, 0, 0); - - /* increment event queue semaphore */ - ixOsalSemaphorePost(&eventQueueSemaphore); - } - else - { - IX_ETH_DB_IRQ_EVENTS_TRACE("DB: (Events) Warning: could not enqueue event (overflow)\n", 0, 0, 0, 0, 0, 0); - } -} - -/** - * @brief Ethernet event processor loop - * - * Extracts at most EVENT_PROCESSING_LIMIT batches of events and - * sends them for processing to @ref ixEthDBProcessEvent(). - * Triggers port updates which normally follow learning events. - * - * @warning do not call directly, executes in separate thread - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBEventProcessorLoop(void *unused1) -{ - IxEthDBPortMap triggerPorts; - IxEthDBPortId portIndex; - - ixEthDBEventProcessorRunning = true; - - IX_ETH_DB_EVENTS_TRACE("DB: (Events) Event processor loop was started\n"); - - while (!ixEthDBLearningShutdown) - { - BOOL keepProcessing = true; - UINT32 processedEvents = 0; - - IX_ETH_DB_EVENTS_VERBOSE_TRACE("DB: (Events) Waiting for new learning event...\n"); - - ixOsalSemaphoreWait(&eventQueueSemaphore, IX_OSAL_WAIT_FOREVER); - - IX_ETH_DB_EVENTS_VERBOSE_TRACE("DB: (Events) Received new event\n"); - - if (!ixEthDBLearningShutdown) - { - /* port update handling */ - SET_EMPTY_DEPENDENCY_MAP(triggerPorts); - - while (keepProcessing) - { - PortEvent local_event; - UINT32 intLockKey; - - /* lock queue */ - ixOsalMutexLock(&eventQueueLock, IX_OSAL_WAIT_FOREVER); - - /* lock NPE interrupts */ - intLockKey = ixOsalIrqLock(); - - /* extract event */ - local_event = *(QUEUE_TAIL(&eventQueue)); - - SHIFT_UPDATE_QUEUE(&eventQueue); - - ixOsalIrqUnlock(intLockKey); - - ixOsalMutexUnlock(&eventQueueLock); - - IX_ETH_DB_EVENTS_TRACE("DB: (Events) Processing event with ID 0x%X\n", local_event.eventType); - - ixEthDBProcessEvent(&local_event, triggerPorts); - - processedEvents++; - - if (processedEvents > EVENT_PROCESSING_LIMIT /* maximum burst reached? */ - || ixOsalSemaphoreTryWait(&eventQueueSemaphore) != IX_SUCCESS) /* or empty queue? */ - { - keepProcessing = false; - } - } - - ixEthDBUpdatePortLearningTrees(triggerPorts); - } - } - - /* turn off automatic updates */ - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - ixEthDBPortInfo[portIndex].updateMethod.updateEnabled = false; - } - - ixEthDBEventProcessorRunning = false; -} - -/** - * @brief event processor routine - * - * @param event event to be processed - * @param triggerPorts port map accumulating ports to be updated - * - * Processes learning events by synchronizing the database with - * newly learnt data. Called only by @ref ixEthDBEventProcessorLoop(). - * - * @warning do not call directly - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBProcessEvent(PortEvent *local_event, IxEthDBPortMap triggerPorts) -{ - MacDescriptor recordTemplate; - - switch (local_event->eventType) - { - case IX_ETH_DB_ADD_FILTERING_RECORD: - /* add record */ - memset(&recordTemplate, 0, sizeof (recordTemplate)); - memcpy(recordTemplate.macAddress, local_event->macAddr.macAddress, sizeof (IxEthDBMacAddr)); - - recordTemplate.type = IX_ETH_DB_FILTERING_RECORD; - recordTemplate.portID = local_event->portID; - recordTemplate.recordData.filteringData.staticEntry = local_event->staticEntry; - - ixEthDBAdd(&recordTemplate, triggerPorts); - - IX_ETH_DB_EVENTS_TRACE("DB: (Events) Added record on port %d\n", local_event->portID); - - break; - - case IX_ETH_DB_REMOVE_FILTERING_RECORD: - /* remove record */ - memset(&recordTemplate, 0, sizeof (recordTemplate)); - memcpy(recordTemplate.macAddress, local_event->macAddr.macAddress, sizeof (IxEthDBMacAddr)); - - recordTemplate.type = IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD; - - ixEthDBRemove(&recordTemplate, triggerPorts); - - IX_ETH_DB_EVENTS_TRACE("DB: (Events) Removed record on port %d\n", local_event->portID); - - break; - - default: - /* can't handle/not interested in this event type */ - ERROR_LOG("DB: (Events) Event processor received an unknown event type (0x%X)\n", local_event->eventType); - - return; - } -} - -/** - * @brief asynchronously adds a filtering record - * by posting an ADD_FILTERING_RECORD event to the event queue - * - * @param macAddr MAC address of the new record - * @param portID port ID of the new record - * @param staticEntry true if record is static, false if dynamic - * - * @return IX_ETH_DB_SUCCESS if the event creation was - * successfull or IX_ETH_DB_BUSY if the event queue is full - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBTriggerAddPortUpdate(IxEthDBMacAddr *macAddr, IxEthDBPortId portID, BOOL staticEntry) -{ - MacDescriptor reference; - - TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER; - - /* fill search fields */ - memcpy(reference.macAddress, macAddr, sizeof (IxEthDBMacAddr)); - reference.portID = portID; - - /* set acceptable record types */ - reference.type = IX_ETH_DB_ALL_FILTERING_RECORDS; - - if (ixEthDBPeekHashEntry(&dbHashtable, IX_ETH_DB_MAC_PORT_KEY, &reference) == IX_ETH_DB_SUCCESS) - { - /* already have an identical record */ - return IX_ETH_DB_SUCCESS; - } - else - { - return ixEthDBTriggerPortUpdate(IX_ETH_DB_ADD_FILTERING_RECORD, macAddr, portID, staticEntry); - } -} - -/** - * @brief asynchronously removes a filtering record - * by posting a REMOVE_FILTERING_RECORD event to the event queue - * - * @param macAddr MAC address of the record to remove - * @param portID port ID of the record to remove - * - * @return IX_ETH_DB_SUCCESS if the event creation was - * successfull or IX_ETH_DB_BUSY if the event queue is full - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBTriggerRemovePortUpdate(IxEthDBMacAddr *macAddr, IxEthDBPortId portID) -{ - if (ixEthDBPeek(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS) != IX_ETH_DB_NO_SUCH_ADDR) - { - return ixEthDBTriggerPortUpdate(IX_ETH_DB_REMOVE_FILTERING_RECORD, macAddr, portID, false); - } - else - { - return IX_ETH_DB_NO_SUCH_ADDR; - } -} - -/** - * @brief adds an ADD or REMOVE event to the main event queue - * - * @param eventType event type - IX_ETH_DB_ADD_FILTERING_RECORD - * to add and IX_ETH_DB_REMOVE_FILTERING_RECORD to remove a - * record. - * - * @return IX_ETH_DB_SUCCESS if the event was successfully - * sent or IX_ETH_DB_BUSY if the event queue is full - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBTriggerPortUpdate(UINT32 eventType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, BOOL staticEntry) -{ - UINT32 intLockKey; - - /* lock interrupts to protect queue */ - intLockKey = ixOsalIrqLock(); - - if (CAN_ENQUEUE(&eventQueue)) - { - PortEvent *queueEvent = QUEUE_HEAD(&eventQueue); - - /* update fields on the queue */ - memcpy(queueEvent->macAddr.macAddress, macAddr->macAddress, sizeof (IxEthDBMacAddr)); - - queueEvent->eventType = eventType; - queueEvent->portID = portID; - queueEvent->staticEntry = staticEntry; - - PUSH_UPDATE_QUEUE(&eventQueue); - - /* imcrement event queue semaphore */ - ixOsalSemaphorePost(&eventQueueSemaphore); - - /* unlock interrupts */ - ixOsalIrqUnlock(intLockKey); - - return IX_ETH_DB_SUCCESS; - } - else /* event queue full */ - { - /* unlock interrupts */ - ixOsalIrqUnlock(intLockKey); - - return IX_ETH_DB_BUSY; - } -} - -/** - * @brief Locks learning tree updates and port disable - * - * - * This function locks portUpdateLock single mutex. It is primarily used - * to avoid executing 'port disable' during ELT maintenance. - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBUpdateLock(void) -{ - ixOsalMutexLock(&portUpdateLock, IX_OSAL_WAIT_FOREVER); -} - -/** - * @brief Unlocks learning tree updates and port disable - * - * - * This function unlocks a portUpdateLock mutex. It is primarily used - * to avoid executing 'port disable' during ELT maintenance. - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBUpdateUnlock(void) -{ - ixOsalMutexUnlock(&portUpdateLock); -} - diff --git a/drivers/net/npe/IxEthDBFeatures.c b/drivers/net/npe/IxEthDBFeatures.c deleted file mode 100644 index 1f7624016a..0000000000 --- a/drivers/net/npe/IxEthDBFeatures.c +++ /dev/null @@ -1,638 +0,0 @@ -/** - * @file IxEthDBFeatures.c - * - * @brief Implementation of the EthDB feature control API - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxNpeDl.h" -#include "IxEthDBQoS.h" -#include "IxEthDB_p.h" - -/** - * @brief scans the capabilities of the loaded NPE images - * - * This function MUST be called by the ixEthDBInit() function. - * No EthDB features (including learning and filtering) are enabled - * before this function is called. - * - * @return none - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBFeatureCapabilityScan(void) -{ - IxNpeDlImageId imageId, npeAImageId; - IxEthDBPortId portIndex; - PortInfo *portInfo; - IxEthDBPriorityTable defaultPriorityTable; - IX_STATUS result; - UINT32 queueIndex; - UINT32 queueStructureIndex; - UINT32 trafficClassDefinitionIndex; - - /* read version of NPE A - required to set the AQM queues for B and C */ - npeAImageId.functionalityId = 0; - ixNpeDlLoadedImageGet(IX_NPEDL_NPEID_NPEA, &npeAImageId); - - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - IxNpeMhMessage msg; - - portInfo = &ixEthDBPortInfo[portIndex]; - - /* check and bypass if NPE B or C is fused out */ - if (ixEthDBSingleEthNpeCheck(portIndex) != IX_ETH_DB_SUCCESS) continue; - - /* all ports are capable of LEARNING by default */ - portInfo->featureCapability |= IX_ETH_DB_LEARNING; - portInfo->featureStatus |= IX_ETH_DB_LEARNING; - - if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE) - { - - if (ixNpeDlLoadedImageGet(IX_ETH_DB_PORT_ID_TO_NPE(portIndex), &imageId) != IX_SUCCESS) - { - WARNING_LOG("DB: (FeatureScan) NpeDl did not provide the image ID for NPE port %d\n", portIndex); - } - else - { - /* initialize and empty NPE response mutex */ - ixOsalMutexInit(&portInfo->npeAckLock); - ixOsalMutexLock(&portInfo->npeAckLock, IX_OSAL_WAIT_FOREVER); - - /* check NPE response to GetStatus */ - msg.data[0] = IX_ETHNPE_NPE_GETSTATUS << 24; - msg.data[1] = 0; - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portIndex), msg, result); - if (result != IX_SUCCESS) - { - WARNING_LOG("DB: (FeatureScan) warning, could not send message to the NPE\n"); - continue; - } - - - if (imageId.functionalityId == 0x00 - || imageId.functionalityId == 0x03 - || imageId.functionalityId == 0x04 - || imageId.functionalityId == 0x80) - { - portInfo->featureCapability |= IX_ETH_DB_FILTERING; - portInfo->featureCapability |= IX_ETH_DB_FIREWALL; - portInfo->featureCapability |= IX_ETH_DB_SPANNING_TREE_PROTOCOL; - } - else if (imageId.functionalityId == 0x01 - || imageId.functionalityId == 0x81) - { - portInfo->featureCapability |= IX_ETH_DB_FILTERING; - portInfo->featureCapability |= IX_ETH_DB_FIREWALL; - portInfo->featureCapability |= IX_ETH_DB_SPANNING_TREE_PROTOCOL; - portInfo->featureCapability |= IX_ETH_DB_VLAN_QOS; - } - else if (imageId.functionalityId == 0x02 - || imageId.functionalityId == 0x82) - { - portInfo->featureCapability |= IX_ETH_DB_WIFI_HEADER_CONVERSION; - portInfo->featureCapability |= IX_ETH_DB_FIREWALL; - portInfo->featureCapability |= IX_ETH_DB_SPANNING_TREE_PROTOCOL; - portInfo->featureCapability |= IX_ETH_DB_VLAN_QOS; - } - - /* reset AQM queues */ - memset(portInfo->ixEthDBTrafficClassAQMAssignments, 0, sizeof (portInfo->ixEthDBTrafficClassAQMAssignments)); - - /* ensure there's at least one traffic class record in the definition table, otherwise we have no default case, hence no queues */ - IX_ENSURE(sizeof (ixEthDBTrafficClassDefinitions) != 0, "DB: no traffic class definitions found, check IxEthDBQoS.h"); - - /* find the traffic class definition index compatible with the current NPE A functionality ID */ - for (trafficClassDefinitionIndex = 0 ; - trafficClassDefinitionIndex < ARRAY_SIZE(ixEthDBTrafficClassDefinitions); - trafficClassDefinitionIndex++) - { - if (ixEthDBTrafficClassDefinitions[trafficClassDefinitionIndex][IX_ETH_DB_NPE_A_FUNCTIONALITY_ID_INDEX] == npeAImageId.functionalityId) - { - /* found it */ - break; - } - } - - /* select the default case if we went over the array boundary */ - if (trafficClassDefinitionIndex == ARRAY_SIZE(ixEthDBTrafficClassDefinitions)) - { - trafficClassDefinitionIndex = 0; /* the first record is the default case */ - } - - /* select queue assignment structure based on the traffic class configuration index */ - queueStructureIndex = ixEthDBTrafficClassDefinitions[trafficClassDefinitionIndex][IX_ETH_DB_QUEUE_ASSIGNMENT_INDEX]; - - /* only traffic class 0 is active at initialization time */ - portInfo->ixEthDBTrafficClassCount = 1; - - /* enable port, VLAN and Firewall feature bits to initialize QoS/VLAN/Firewall configuration */ - portInfo->featureStatus |= IX_ETH_DB_VLAN_QOS; - portInfo->featureStatus |= IX_ETH_DB_FIREWALL; - portInfo->enabled = true; - -#define CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */ -#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */ - /* set VLAN initial configuration (permissive) */ - if ((portInfo->featureCapability & IX_ETH_DB_VLAN_QOS) != 0) /* QoS-enabled image */ - { - /* QoS capable */ - portInfo->ixEthDBTrafficClassAvailable = ixEthDBTrafficClassDefinitions[trafficClassDefinitionIndex][IX_ETH_DB_TRAFFIC_CLASS_COUNT_INDEX]; - - /* set AQM queues */ - for (queueIndex = 0 ; queueIndex < IX_IEEE802_1Q_QOS_PRIORITY_COUNT ; queueIndex++) - { - portInfo->ixEthDBTrafficClassAQMAssignments[queueIndex] = ixEthDBQueueAssignments[queueStructureIndex][queueIndex]; - } - - /* set default PVID (0) and default traffic class 0 */ - ixEthDBPortVlanTagSet(portIndex, 0); - - /* enable reception of all frames */ - ixEthDBAcceptableFrameTypeSet(portIndex, IX_ETH_DB_ACCEPT_ALL_FRAMES); - - /* clear full VLAN membership */ - ixEthDBPortVlanMembershipRangeRemove(portIndex, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID); - - /* clear TTI table - no VLAN tagged frames will be transmitted */ - ixEthDBEgressVlanRangeTaggingEnabledSet(portIndex, 0, 4094, false); - - /* set membership on 0, otherwise no Tx or Rx is working */ - ixEthDBPortVlanMembershipAdd(portIndex, 0); - } - else /* QoS not available in this image */ -#endif /* test-only */ - { - /* initialize traffic class availability (only class 0 is available) */ - portInfo->ixEthDBTrafficClassAvailable = 1; - - /* point all AQM queues to traffic class 0 */ - for (queueIndex = 0 ; queueIndex < IX_IEEE802_1Q_QOS_PRIORITY_COUNT ; queueIndex++) - { - portInfo->ixEthDBTrafficClassAQMAssignments[queueIndex] = - ixEthDBQueueAssignments[queueStructureIndex][0]; - } - } - -#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */ - /* download priority mapping table and Rx queue configuration */ - memset (defaultPriorityTable, 0, sizeof (defaultPriorityTable)); - ixEthDBPriorityMappingTableSet(portIndex, defaultPriorityTable); -#endif - - /* by default we turn off invalid source MAC address filtering */ - ixEthDBFirewallInvalidAddressFilterEnable(portIndex, false); - - /* disable port, VLAN, Firewall feature bits */ - portInfo->featureStatus &= ~IX_ETH_DB_VLAN_QOS; - portInfo->featureStatus &= ~IX_ETH_DB_FIREWALL; - portInfo->enabled = false; - - /* enable filtering by default if present */ - if ((portInfo->featureCapability & IX_ETH_DB_FILTERING) != 0) - { - portInfo->featureStatus |= IX_ETH_DB_FILTERING; - } - } - } - } -} - -/** - * @brief returns the capability of a port - * - * @param portID ID of the port - * @param featureSet location to store the port capability in - * - * This function will save the capability set of the given port - * into the given location. Capabilities are bit-ORed, each representing - * a bit of the feature set. - * - * Note that this function is documented in the main component - * public header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or IX_ETH_DB_INVALID_PORT if the given port is invalid - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature *featureSet) -{ - IX_ETH_DB_CHECK_PORT_INITIALIZED(portID); - - IX_ETH_DB_CHECK_REFERENCE(featureSet); - - *featureSet = ixEthDBPortInfo[portID].featureCapability; - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief enables or disables a port capability - * - * @param portID ID of the port - * @param feature feature to enable or disable - * @param enabled true to enable the selected feature or false to disable it - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, BOOL enable) -{ - PortInfo *portInfo; - IxEthDBPriorityTable defaultPriorityTable; - IxEthDBVlanSet vlanSet; - IxEthDBStatus status = IX_ETH_DB_SUCCESS; - BOOL portEnabled; - - IX_ETH_DB_CHECK_PORT_INITIALIZED(portID); - - portInfo = &ixEthDBPortInfo[portID]; - portEnabled = portInfo->enabled; - - /* check that only one feature is selected */ - if (!ixEthDBCheckSingleBitValue(feature)) - { - return IX_ETH_DB_FEATURE_UNAVAILABLE; - } - - /* port capable of this feature? */ - if ((portInfo->featureCapability & feature) == 0) - { - return IX_ETH_DB_FEATURE_UNAVAILABLE; - } - - /* mutual exclusion between learning and WiFi header conversion */ - if (enable && ((feature | portInfo->featureStatus) & (IX_ETH_DB_FILTERING | IX_ETH_DB_WIFI_HEADER_CONVERSION)) - == (IX_ETH_DB_FILTERING | IX_ETH_DB_WIFI_HEADER_CONVERSION)) - { - return IX_ETH_DB_NO_PERMISSION; - } - - /* learning must be enabled before filtering */ - if (enable && (feature == IX_ETH_DB_FILTERING) && ((portInfo->featureStatus & IX_ETH_DB_LEARNING) == 0)) - { - return IX_ETH_DB_NO_PERMISSION; - } - - /* filtering must be disabled before learning */ - if (!enable && (feature == IX_ETH_DB_LEARNING) && ((portInfo->featureStatus & IX_ETH_DB_FILTERING) != 0)) - { - return IX_ETH_DB_NO_PERMISSION; - } - - /* redundant enabling or disabling */ - if ((!enable && ((portInfo->featureStatus & feature) == 0)) - || (enable && ((portInfo->featureStatus & feature) != 0))) - { - /* do nothing */ - return IX_ETH_DB_SUCCESS; - } - - /* force port enabled */ - portInfo->enabled = true; - - if (enable) - { - /* turn on enable bit */ - portInfo->featureStatus |= feature; - -#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */ - /* if this is VLAN/QoS set the default priority table */ - if (feature == IX_ETH_DB_VLAN_QOS) - { - /* turn on VLAN/QoS (most permissive mode): - - set default 802.1Q priority mapping table, in accordance to the - availability of traffic classes - - set the acceptable frame filter to accept all - - set the Ingress tagging mode to pass-through - - set full VLAN membership list - - set full TTI table - - set the default 802.1Q tag to 0 (VLAN ID 0, Pri 0, CFI 0) - - enable TPID port extraction - */ - - portInfo->ixEthDBTrafficClassCount = portInfo->ixEthDBTrafficClassAvailable; - - /* set default 802.1Q priority mapping table - note that C indexing starts from 0, so we substract 1 here */ - memcpy (defaultPriorityTable, - (const void *) ixEthIEEE802_1QUserPriorityToTrafficClassMapping[portInfo->ixEthDBTrafficClassCount - 1], - sizeof (defaultPriorityTable)); - - /* update priority mapping and AQM queue assignments */ - status = ixEthDBPriorityMappingTableSet(portID, defaultPriorityTable); - - if (status == IX_ETH_DB_SUCCESS) - { - status = ixEthDBAcceptableFrameTypeSet(portID, IX_ETH_DB_ACCEPT_ALL_FRAMES); - } - - if (status == IX_ETH_DB_SUCCESS) - { - status = ixEthDBIngressVlanTaggingEnabledSet(portID, IX_ETH_DB_PASS_THROUGH); - } - - /* set membership and TTI tables */ - memset (vlanSet, 0xFF, sizeof (vlanSet)); - - if (status == IX_ETH_DB_SUCCESS) - { - /* use the internal function to bypass PVID check */ - status = ixEthDBPortVlanTableSet(portID, portInfo->vlanMembership, vlanSet); - } - - if (status == IX_ETH_DB_SUCCESS) - { - /* use the internal function to bypass PVID check */ - status = ixEthDBPortVlanTableSet(portID, portInfo->transmitTaggingInfo, vlanSet); - } - - /* reset the PVID */ - if (status == IX_ETH_DB_SUCCESS) - { - status = ixEthDBPortVlanTagSet(portID, 0); - } - - /* enable TPID port extraction */ - if (status == IX_ETH_DB_SUCCESS) - { - status = ixEthDBVlanPortExtractionEnable(portID, true); - } - } - else if (feature == IX_ETH_DB_FIREWALL) -#endif - { - /* firewall starts in black-list mode unless otherwise configured before * - * note that invalid source MAC address filtering is disabled by default */ - if (portInfo->firewallMode != IX_ETH_DB_FIREWALL_BLACK_LIST - && portInfo->firewallMode != IX_ETH_DB_FIREWALL_WHITE_LIST) - { - status = ixEthDBFirewallModeSet(portID, IX_ETH_DB_FIREWALL_BLACK_LIST); - - if (status == IX_ETH_DB_SUCCESS) - { - status = ixEthDBFirewallInvalidAddressFilterEnable(portID, false); - } - } - } - - if (status != IX_ETH_DB_SUCCESS) - { - /* checks failed, disable */ - portInfo->featureStatus &= ~feature; - } - } - else - { - /* turn off features */ - if (feature == IX_ETH_DB_FIREWALL) - { - /* turning off the firewall is equivalent to: - - set to black-list mode - - clear all the entries and download the new table - - turn off the invalid source address checking - */ - - status = ixEthDBDatabaseClear(portID, IX_ETH_DB_FIREWALL_RECORD); - - if (status == IX_ETH_DB_SUCCESS) - { - status = ixEthDBFirewallModeSet(portID, IX_ETH_DB_FIREWALL_BLACK_LIST); - } - - if (status == IX_ETH_DB_SUCCESS) - { - status = ixEthDBFirewallInvalidAddressFilterEnable(portID, false); - } - - if (status == IX_ETH_DB_SUCCESS) - { - status = ixEthDBFirewallTableDownload(portID); - } - } - else if (feature == IX_ETH_DB_WIFI_HEADER_CONVERSION) - { - /* turn off header conversion */ - status = ixEthDBDatabaseClear(portID, IX_ETH_DB_WIFI_RECORD); - - if (status == IX_ETH_DB_SUCCESS) - { - status = ixEthDBWiFiConversionTableDownload(portID); - } - } -#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */ - else if (feature == IX_ETH_DB_VLAN_QOS) - { - /* turn off VLAN/QoS: - - set a priority mapping table with one traffic class - - set the acceptable frame filter to accept all - - set the Ingress tagging mode to pass-through - - clear the VLAN membership list - - clear the TTI table - - set the default 802.1Q tag to 0 (VLAN ID 0, Pri 0, CFI 0) - - disable TPID port extraction - */ - - /* initialize all => traffic class 0 priority mapping table */ - memset (defaultPriorityTable, 0, sizeof (defaultPriorityTable)); - portInfo->ixEthDBTrafficClassCount = 1; - status = ixEthDBPriorityMappingTableSet(portID, defaultPriorityTable); - - if (status == IX_ETH_DB_SUCCESS) - { - status = ixEthDBAcceptableFrameTypeSet(portID, IX_ETH_DB_ACCEPT_ALL_FRAMES); - } - - if (status == IX_ETH_DB_SUCCESS) - { - status = ixEthDBIngressVlanTaggingEnabledSet(portID, IX_ETH_DB_PASS_THROUGH); - } - - /* clear membership and TTI tables */ - memset (vlanSet, 0, sizeof (vlanSet)); - - if (status == IX_ETH_DB_SUCCESS) - { - /* use the internal function to bypass PVID check */ - status = ixEthDBPortVlanTableSet(portID, portInfo->vlanMembership, vlanSet); - } - - if (status == IX_ETH_DB_SUCCESS) - { - /* use the internal function to bypass PVID check */ - status = ixEthDBPortVlanTableSet(portID, portInfo->transmitTaggingInfo, vlanSet); - } - - /* reset the PVID */ - if (status == IX_ETH_DB_SUCCESS) - { - status = ixEthDBPortVlanTagSet(portID, 0); - } - - /* disable TPID port extraction */ - if (status == IX_ETH_DB_SUCCESS) - { - status = ixEthDBVlanPortExtractionEnable(portID, false); - } - } -#endif - - if (status == IX_ETH_DB_SUCCESS) - { - /* checks passed, disable */ - portInfo->featureStatus &= ~feature; - } - } - - /* restore port enabled state */ - portInfo->enabled = portEnabled; - - return status; -} - -/** - * @brief returns the status of a feature - * - * @param portID port ID - * @param present location to store a boolean value indicating - * if the feature is present (true) or not (false) - * @param enabled location to store a booleam value indicating - * if the feature is present (true) or not (false) - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFeatureStatusGet(IxEthDBPortId portID, IxEthDBFeature feature, BOOL *present, BOOL *enabled) -{ - PortInfo *portInfo; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_REFERENCE(present); - - IX_ETH_DB_CHECK_REFERENCE(enabled); - - portInfo = &ixEthDBPortInfo[portID]; - - *present = (portInfo->featureCapability & feature) != 0; - *enabled = (portInfo->featureStatus & feature) != 0; - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief returns the value of an EthDB property - * - * @param portID ID of the port - * @param feature feature owning the property - * @param property ID of the property - * @param type location to store the property type into - * @param value location to store the property value into - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFeaturePropertyGet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, IxEthDBPropertyType *type, void *value) -{ - IX_ETH_DB_CHECK_PORT_EXISTS(portID); - - IX_ETH_DB_CHECK_REFERENCE(type); - - IX_ETH_DB_CHECK_REFERENCE(value); - - if (feature == IX_ETH_DB_VLAN_QOS) - { - if (property == IX_ETH_DB_QOS_TRAFFIC_CLASS_COUNT_PROPERTY) - { - * (UINT32 *) value = ixEthDBPortInfo[portID].ixEthDBTrafficClassCount; - *type = IX_ETH_DB_INTEGER_PROPERTY; - - return IX_ETH_DB_SUCCESS; - } - else if (property >= IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY - && property <= IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY) - { - UINT32 classDelta = property - IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY; - - if (classDelta >= ixEthDBPortInfo[portID].ixEthDBTrafficClassCount) - { - return IX_ETH_DB_FAIL; - } - - * (UINT32 *) value = ixEthDBPortInfo[portID].ixEthDBTrafficClassAQMAssignments[classDelta]; - *type = IX_ETH_DB_INTEGER_PROPERTY; - - return IX_ETH_DB_SUCCESS; - } - } - - return IX_ETH_DB_INVALID_ARG; -} - -/** - * @brief sets the value of an EthDB property - * - * @param portID ID of the port - * @param feature feature owning the property - * @param property ID of the property - * @param value location containing the property value - * - * This function implements a private property intended - * only for EthAcc usage. Upon setting the IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE - * property (the value is ignored), the availability of traffic classes is - * frozen to whatever traffic class structure is currently in use. - * This means that if VLAN_QOS has been enabled before EthAcc - * initialization then all the defined traffic classes will be available; - * otherwise only one traffic class (0) will be available. - * - * Note that this function is documented in the main component - * header file, IxEthDB.h as not accepting any parameters. The - * current implementation is only intended for the private use of EthAcc. - * - * Also note that once this function is called the effect is irreversible, - * unless EthDB is complete unloaded and re-initialized. - * - * @return IX_ETH_DB_INVALID_ARG (no read-write properties are - * supported in this release) - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFeaturePropertySet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, void *value) -{ - IX_ETH_DB_CHECK_PORT_EXISTS(portID); - - if ((feature == IX_ETH_DB_VLAN_QOS) && (property == IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE)) - { - ixEthDBPortInfo[portID].ixEthDBTrafficClassAvailable = ixEthDBPortInfo[portID].ixEthDBTrafficClassCount; - - return IX_ETH_DB_SUCCESS; - } - - return IX_ETH_DB_INVALID_ARG; -} diff --git a/drivers/net/npe/IxEthDBFirewall.c b/drivers/net/npe/IxEthDBFirewall.c deleted file mode 100644 index c0ae5624ff..0000000000 --- a/drivers/net/npe/IxEthDBFirewall.c +++ /dev/null @@ -1,242 +0,0 @@ -/** - * @file IxEthDBFirewall.c - * - * @brief Implementation of the firewall API - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - - -#include "IxEthDB_p.h" - -/** - * @brief updates the NPE firewall operating mode and - * firewall address table - * - * @param portID ID of the port - * @param epDelta initial entry point for binary searches (NPE optimization) - * @param address address of the firewall MAC address table - * - * This function will send a message to the NPE configuring the - * firewall mode (white list or black list), invalid source - * address filtering and downloading a new MAC address database - * to be used for firewall matching. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or IX_ETH_DB_FAIL otherwise - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallUpdate(IxEthDBPortId portID, void *address, UINT32 epDelta) -{ - IxNpeMhMessage message; - IX_STATUS result; - - UINT32 mode = 0; - PortInfo *portInfo = &ixEthDBPortInfo[portID]; - - mode = (portInfo->srcAddressFilterEnabled != false) << 1 | (portInfo->firewallMode == IX_ETH_DB_FIREWALL_WHITE_LIST); - - FILL_SETFIREWALLMODE_MSG(message, - IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), - epDelta, - mode, - IX_OSAL_MMU_VIRT_TO_PHYS(address)); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief configures the firewall white list/black list - * access mode - * - * @param portID ID of the port - * @param mode firewall filtering mode (IX_ETH_DB_FIREWALL_WHITE_LIST - * or IX_ETH_DB_FIREWALL_BLACK_LIST) - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); - - if (mode != IX_ETH_DB_FIREWALL_WHITE_LIST - && mode != IX_ETH_DB_FIREWALL_BLACK_LIST) - { - return IX_ETH_DB_INVALID_ARG; - } - - ixEthDBPortInfo[portID].firewallMode = mode; - - return ixEthDBFirewallTableDownload(portID); -} - -/** - * @brief enables or disables the invalid source MAC address filter - * - * @param portID ID of the port - * @param enable true to enable invalid source MAC address filtering - * or false to disable it - * - * The invalid source MAC address filter will discard, when enabled, - * frames whose source MAC address is a multicast or the broadcast MAC - * address. - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); - - ixEthDBPortInfo[portID].srcAddressFilterEnabled = enable; - - return ixEthDBFirewallTableDownload(portID); -} - -/** - * @brief adds a firewall record - * - * @param portID ID of the port - * @param macAddr MAC address of the new record - * - * This function will add a new firewall record - * on the specified port, using the specified - * MAC address. If the record already exists this - * function will silently return IX_ETH_DB_SUCCESS, - * although no duplicate records are added. - * - * Note that this function is documented in the main - * component header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) -{ - MacDescriptor recordTemplate; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); - - memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr)); - - recordTemplate.type = IX_ETH_DB_FIREWALL_RECORD; - recordTemplate.portID = portID; - - return ixEthDBAdd(&recordTemplate, NULL); -} - -/** - * @brief removes a firewall record - * - * @param portID ID of the port - * @param macAddr MAC address of the record to remove - * - * This function will attempt to remove a firewall - * record from the given port, using the specified - * MAC address. - * - * Note that this function is documented in the main - * component header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully of an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) -{ - MacDescriptor recordTemplate; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); - - memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr)); - - recordTemplate.type = IX_ETH_DB_FIREWALL_RECORD; - recordTemplate.portID = portID; - - return ixEthDBRemove(&recordTemplate, NULL); -} - -/** - * @brief downloads the firewall address table to an NPE - * - * @param portID ID of the port - * - * This function will download the firewall address table to - * an NPE port. - * - * Note that this function is documented in the main - * component header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or IX_ETH_DB_FAIL otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID) -{ - IxEthDBPortMap query; - IxEthDBStatus result; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); - - SET_DEPENDENCY_MAP(query, portID); - - ixEthDBUpdateLock(); - - ixEthDBPortInfo[portID].updateMethod.searchTree = ixEthDBQuery(NULL, query, IX_ETH_DB_FIREWALL_RECORD, MAX_FW_SIZE); - - result = ixEthDBNPEUpdateHandler(portID, IX_ETH_DB_FIREWALL_RECORD); - - ixEthDBUpdateUnlock(); - - return result; -} diff --git a/drivers/net/npe/IxEthDBHashtable.c b/drivers/net/npe/IxEthDBHashtable.c deleted file mode 100644 index 9493a5b48b..0000000000 --- a/drivers/net/npe/IxEthDBHashtable.c +++ /dev/null @@ -1,618 +0,0 @@ -/** - * @file ethHash.c - * - * @brief Hashtable implementation - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - - -#include "IxEthDB_p.h" -#include "IxEthDBLocks_p.h" - -/** - * @addtogroup EthDB - * - * @{ - */ - -/** - * @brief initializes a hash table object - * - * @param hashTable uninitialized hash table structure - * @param numBuckets number of buckets to use - * @param entryHashFunction hash function used - * to hash entire hash node data block (for adding) - * @param matchFunctions array of match functions, indexed on type, - * used to differentiate records with the same hash value - * @param freeFunction function used to free node data blocks - * - * Initializes the given hash table object. - * - * @internal - */ -void ixEthDBInitHash(HashTable *hashTable, - UINT32 numBuckets, - HashFunction entryHashFunction, - MatchFunction *matchFunctions, - FreeFunction freeFunction) -{ - UINT32 bucketIndex; - UINT32 hashSize = numBuckets * sizeof(HashNode *); - - /* entry hashing, matching and freeing methods */ - hashTable->entryHashFunction = entryHashFunction; - hashTable->matchFunctions = matchFunctions; - hashTable->freeFunction = freeFunction; - - /* buckets */ - hashTable->numBuckets = numBuckets; - - /* set to 0 all buckets */ - memset(hashTable->hashBuckets, 0, hashSize); - - /* init bucket locks - note that initially all mutexes are unlocked after MutexInit()*/ - for (bucketIndex = 0 ; bucketIndex < numBuckets ; bucketIndex++) - { - ixOsalFastMutexInit(&hashTable->bucketLocks[bucketIndex]); - } -} - -/** - * @brief adds an entry to the hash table - * - * @param hashTable hash table to add the entry to - * @param entry entry to add - * - * The entry will be hashed using the entry hashing function and added to the - * hash table, unless a locking blockage occurs, in which case the caller - * should retry. - * - * @retval IX_ETH_DB_SUCCESS if adding entry has succeeded - * @retval IX_ETH_DB_NOMEM if there's no memory left in the hash node pool - * @retval IX_ETH_DB_BUSY if there's a locking failure on the insertion path - * - * @internal - */ -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBAddHashEntry(HashTable *hashTable, void *entry) -{ - UINT32 hashValue = hashTable->entryHashFunction(entry); - UINT32 bucketIndex = hashValue % hashTable->numBuckets; - HashNode *bucket = hashTable->hashBuckets[bucketIndex]; - HashNode *newNode; - - LockStack locks; - - INIT_STACK(&locks); - - /* lock bucket */ - PUSH_LOCK(&locks, &hashTable->bucketLocks[bucketIndex]); - - /* lock insertion element (first in chain), if any */ - if (bucket != NULL) - { - PUSH_LOCK(&locks, &bucket->lock); - } - - /* get new node */ - newNode = ixEthDBAllocHashNode(); - - if (newNode == NULL) - { - /* unlock everything */ - UNROLL_STACK(&locks); - - return IX_ETH_DB_NOMEM; - } - - /* init lock - note that mutexes are unlocked after MutexInit */ - ixOsalFastMutexInit(&newNode->lock); - - /* populate new link */ - newNode->data = entry; - - /* add to bucket */ - newNode->next = bucket; - hashTable->hashBuckets[bucketIndex] = newNode; - - /* unlock bucket and insertion point */ - UNROLL_STACK(&locks); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief removes an entry from the hashtable - * - * @param hashTable hash table to remove entry from - * @param keyType type of record key used for matching - * @param reference reference key used to identify the entry - * - * The reference key will be hashed using the key hashing function, - * the entry is searched using the hashed value and then examined - * against the reference entry using the match function. A positive - * match will trigger the deletion of the entry. - * Locking failures are reported and the caller should retry. - * - * @retval IX_ETH_DB_SUCCESS if the removal was successful - * @retval IX_ETH_DB_NO_SUCH_ADDR if the entry was not found - * @retval IX_ETH_DB_BUSY if a locking failure occured during the process - * - * @internal - */ -IxEthDBStatus ixEthDBRemoveHashEntry(HashTable *hashTable, int keyType, void *reference) -{ - UINT32 hashValue = hashTable->entryHashFunction(reference); - UINT32 bucketIndex = hashValue % hashTable->numBuckets; - HashNode *node = hashTable->hashBuckets[bucketIndex]; - HashNode *previousNode = NULL; - - LockStack locks; - - INIT_STACK(&locks); - - while (node != NULL) - { - /* try to lock node */ - PUSH_LOCK(&locks, &node->lock); - - if (hashTable->matchFunctions[keyType](reference, node->data)) - { - /* found entry */ - if (node->next != NULL) - { - PUSH_LOCK(&locks, &node->next->lock); - } - - if (previousNode == NULL) - { - /* node is head of chain */ - PUSH_LOCK(&locks, &hashTable->bucketLocks[bucketIndex]); - - hashTable->hashBuckets[bucketIndex] = node->next; - - POP_LOCK(&locks); - } - else - { - /* relink */ - previousNode->next = node->next; - } - - UNROLL_STACK(&locks); - - /* free node */ - hashTable->freeFunction(node->data); - ixEthDBFreeHashNode(node); - - return IX_ETH_DB_SUCCESS; - } - else - { - if (previousNode != NULL) - { - /* unlock previous node */ - SHIFT_STACK(&locks); - } - - /* advance to next element in chain */ - previousNode = node; - node = node->next; - } - } - - UNROLL_STACK(&locks); - - /* not found */ - return IX_ETH_DB_NO_SUCH_ADDR; -} - -/** - * @brief retrieves an entry from the hash table - * - * @param hashTable hash table to perform the search into - * @param reference search key (a MAC address) - * @param keyType type of record key used for matching - * @param searchResult pointer where a reference to the located hash node - * is placed - * - * Searches the entry with the same key as reference and places the - * pointer to the resulting node in searchResult. - * An implicit write access lock is granted after a search, which gives the - * caller the opportunity to modify the entry. - * Access should be released as soon as possible using @ref ixEthDBReleaseHashNode(). - * - * @see ixEthDBReleaseHashNode() - * - * @retval IX_ETH_DB_SUCCESS if the search was completed successfully - * @retval IX_ETH_DB_NO_SUCH_ADDRESS if no entry with the given key was found - * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case - * the caller should retry - * - * @warning unless the return value is IX_ETH_DB_SUCCESS the searchResult - * location is NOT modified and therefore using a NULL comparison test when the - * value was not properly initialized would be an error - * - * @internal - */ -IxEthDBStatus ixEthDBSearchHashEntry(HashTable *hashTable, int keyType, void *reference, HashNode **searchResult) -{ - UINT32 hashValue; - HashNode *node; - - hashValue = hashTable->entryHashFunction(reference); - node = hashTable->hashBuckets[hashValue % hashTable->numBuckets]; - - while (node != NULL) - { - TRY_LOCK(&node->lock); - - if (hashTable->matchFunctions[keyType](reference, node->data)) - { - *searchResult = node; - - return IX_ETH_DB_SUCCESS; - } - else - { - UNLOCK(&node->lock); - - node = node->next; - } - } - - /* not found */ - return IX_ETH_DB_NO_SUCH_ADDR; -} - -/** - * @brief reports the existence of an entry in the hash table - * - * @param hashTable hash table to perform the search into - * @param reference search key (a MAC address) - * @param keyType type of record key used for matching - * - * Searches the entry with the same key as reference. - * No implicit write access lock is granted after a search, hence the - * caller cannot access or modify the entry. The result is only temporary. - * - * @see ixEthDBReleaseHashNode() - * - * @retval IX_ETH_DB_SUCCESS if the search was completed successfully - * @retval IX_ETH_DB_NO_SUCH_ADDRESS if no entry with the given key was found - * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case - * the caller should retry - * - * @internal - */ -IxEthDBStatus ixEthDBPeekHashEntry(HashTable *hashTable, int keyType, void *reference) -{ - UINT32 hashValue; - HashNode *node; - - hashValue = hashTable->entryHashFunction(reference); - node = hashTable->hashBuckets[hashValue % hashTable->numBuckets]; - - while (node != NULL) - { - TRY_LOCK(&node->lock); - - if (hashTable->matchFunctions[keyType](reference, node->data)) - { - UNLOCK(&node->lock); - - return IX_ETH_DB_SUCCESS; - } - else - { - UNLOCK(&node->lock); - - node = node->next; - } - } - - /* not found */ - return IX_ETH_DB_NO_SUCH_ADDR; -} - -/** - * @brief releases the write access lock - * - * @pre the node should have been obtained via @ref ixEthDBSearchHashEntry() - * - * @see ixEthDBSearchHashEntry() - * - * @internal - */ -void ixEthDBReleaseHashNode(HashNode *node) -{ - UNLOCK(&node->lock); -} - -/** - * @brief initializes a hash iterator - * - * @param hashTable hash table to be iterated - * @param iterator iterator object - * - * If the initialization is successful the iterator will point to the - * first hash table record (if any). - * Testing if the iterator has not passed the end of the table should be - * done using the IS_ITERATOR_VALID(iteratorPtr) macro. - * An implicit write access lock is granted on the entry pointed by the iterator. - * The access is automatically revoked when the iterator is incremented. - * If the caller decides to terminate the iteration before the end of the table is - * passed then the manual access release method, @ref ixEthDBReleaseHashIterator, - * must be called. - * - * @see ixEthDBReleaseHashIterator() - * - * @retval IX_ETH_DB_SUCCESS if initialization was successful and the iterator points - * to the first valid table node - * @retval IX_ETH_DB_FAIL if the table is empty - * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case the caller - * should retry - * - * @warning do not use ixEthDBReleaseHashNode() on entries pointed by the iterator, as this - * might place the database in a permanent invalid lock state - * - * @internal - */ -IxEthDBStatus ixEthDBInitHashIterator(HashTable *hashTable, HashIterator *iterator) -{ - iterator->bucketIndex = 0; - iterator->node = NULL; - iterator->previousNode = NULL; - - return ixEthDBIncrementHashIterator(hashTable, iterator); -} - -/** - * @brief releases the write access locks of the iterator nodes - * - * @warning use of this function is required only when the caller terminates an iteration - * before reaching the end of the table - * - * @see ixEthDBInitHashIterator() - * @see ixEthDBIncrementHashIterator() - * - * @param iterator iterator whose node(s) should be unlocked - * - * @internal - */ -void ixEthDBReleaseHashIterator(HashIterator *iterator) -{ - if (iterator->previousNode != NULL) - { - UNLOCK(&iterator->previousNode->lock); - } - - if (iterator->node != NULL) - { - UNLOCK(&iterator->node->lock); - } -} - -/** - * @brief incremenents an iterator so that it points to the next valid entry of the table - * (if any) - * - * @param hashTable hash table to iterate - * @param iterator iterator object - * - * @pre the iterator object must be initialized using @ref ixEthDBInitHashIterator() - * - * If the increment operation is successful the iterator will point to the - * next hash table record (if any). - * Testing if the iterator has not passed the end of the table should be - * done using the IS_ITERATOR_VALID(iteratorPtr) macro. - * An implicit write access lock is granted on the entry pointed by the iterator. - * The access is automatically revoked when the iterator is re-incremented. - * If the caller decides to terminate the iteration before the end of the table is - * passed then the manual access release method, @ref ixEthDBReleaseHashIterator, - * must be called. - * Is is guaranteed that no other thread can remove or change the iterated entry until - * the iterator is incremented successfully. - * - * @see ixEthDBReleaseHashIterator() - * - * @retval IX_ETH_DB_SUCCESS if the operation was successful and the iterator points - * to the next valid table node - * @retval IX_ETH_DB_FAIL if the iterator has passed the end of the table - * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case the caller - * should retry - * - * @warning do not use ixEthDBReleaseHashNode() on entries pointed by the iterator, as this - * might place the database in a permanent invalid lock state - * - * @internal - */ -IxEthDBStatus ixEthDBIncrementHashIterator(HashTable *hashTable, HashIterator *iterator) -{ - /* unless iterator is just initialized... */ - if (iterator->node != NULL) - { - /* try next in chain */ - if (iterator->node->next != NULL) - { - TRY_LOCK(&iterator->node->next->lock); - - if (iterator->previousNode != NULL) - { - UNLOCK(&iterator->previousNode->lock); - } - - iterator->previousNode = iterator->node; - iterator->node = iterator->node->next; - - return IX_ETH_DB_SUCCESS; - } - else - { - /* last in chain, prepare for next bucket */ - iterator->bucketIndex++; - } - } - - /* try next used bucket */ - for (; iterator->bucketIndex < hashTable->numBuckets ; iterator->bucketIndex++) - { - HashNode **nodePtr = &(hashTable->hashBuckets[iterator->bucketIndex]); - HashNode *node = *nodePtr; -#if (CPU!=SIMSPARCSOLARIS) && !defined (__wince) - if (((iterator->bucketIndex & IX_ETHDB_BUCKET_INDEX_MASK) == 0) && - (iterator->bucketIndex < (hashTable->numBuckets - IX_ETHDB_BUCKETPTR_AHEAD))) - { - /* preload next cache line (2 cache line ahead) */ - nodePtr += IX_ETHDB_BUCKETPTR_AHEAD; - __asm__ ("pld [%0];\n": : "r" (nodePtr)); - } -#endif - if (node != NULL) - { - TRY_LOCK(&node->lock); - - /* unlock last one or two nodes in the previous chain */ - if (iterator->node != NULL) - { - UNLOCK(&iterator->node->lock); - - if (iterator->previousNode != NULL) - { - UNLOCK(&iterator->previousNode->lock); - } - } - - /* redirect iterator */ - iterator->previousNode = NULL; - iterator->node = node; - - return IX_ETH_DB_SUCCESS; - } - } - - /* could not advance iterator */ - if (iterator->node != NULL) - { - UNLOCK(&iterator->node->lock); - - if (iterator->previousNode != NULL) - { - UNLOCK(&iterator->previousNode->lock); - } - - iterator->node = NULL; - } - - return IX_ETH_DB_END; -} - -/** - * @brief removes an entry pointed by an iterator - * - * @param hashTable iterated hash table - * @param iterator iterator object - * - * Removes the entry currently pointed by the iterator and repositions the iterator - * on the next valid entry (if any). Handles locking issues automatically and - * implicitely grants write access lock to the new pointed entry. - * Failures due to concurrent threads having write access locks in the same region - * preserve the state of the database and the iterator object, leaving the caller - * free to retry without loss of access. It is guaranteed that only the thread owning - * the iterator can remove the object pointed by the iterator. - * - * @retval IX_ETH_DB_SUCCESS if removal has succeeded - * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case the caller - * should retry - * - * @internal - */ -IxEthDBStatus ixEthDBRemoveEntryAtHashIterator(HashTable *hashTable, HashIterator *iterator) -{ - HashIterator nextIteratorPos; - LockStack locks; - - INIT_STACK(&locks); - - /* set initial bucket index for next position */ - nextIteratorPos.bucketIndex = iterator->bucketIndex; - - /* compute iterator position before removing anything and lock ahead */ - if (iterator->node->next != NULL) - { - PUSH_LOCK(&locks, &iterator->node->next->lock); - - /* reposition on the next node in the chain */ - nextIteratorPos.node = iterator->node->next; - nextIteratorPos.previousNode = iterator->previousNode; - } - else - { - /* try next chain - don't know yet if we'll find anything */ - nextIteratorPos.node = NULL; - - /* if we find something it's a chain head */ - nextIteratorPos.previousNode = NULL; - - /* browse up in the buckets to find a non-null chain */ - while (++nextIteratorPos.bucketIndex < hashTable->numBuckets) - { - nextIteratorPos.node = hashTable->hashBuckets[nextIteratorPos.bucketIndex]; - - if (nextIteratorPos.node != NULL) - { - /* found a non-empty chain, try to lock head */ - PUSH_LOCK(&locks, &nextIteratorPos.node->lock); - - break; - } - } - } - - /* restore links over the to-be-deleted item */ - if (iterator->previousNode == NULL) - { - /* first in chain, lock bucket */ - PUSH_LOCK(&locks, &hashTable->bucketLocks[iterator->bucketIndex]); - - hashTable->hashBuckets[iterator->bucketIndex] = iterator->node->next; - - POP_LOCK(&locks); - } - else - { - /* relink */ - iterator->previousNode->next = iterator->node->next; - - /* unlock last remaining node in current chain when moving between chains */ - if (iterator->node->next == NULL) - { - UNLOCK(&iterator->previousNode->lock); - } - } - - /* delete entry */ - hashTable->freeFunction(iterator->node->data); - ixEthDBFreeHashNode(iterator->node); - - /* reposition iterator */ - *iterator = nextIteratorPos; - - return IX_ETH_DB_SUCCESS; -} - -/** - * @} - */ diff --git a/drivers/net/npe/IxEthDBLearning.c b/drivers/net/npe/IxEthDBLearning.c deleted file mode 100644 index 1080d112de..0000000000 --- a/drivers/net/npe/IxEthDBLearning.c +++ /dev/null @@ -1,125 +0,0 @@ -/** - * @file IxEthDBLearning.c - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxEthDB_p.h" - -/** - * @brief hashes the mac address in a mac descriptor with a XOR function - * - * @param entry pointer to a mac descriptor to be hashed - * - * This function only extracts the mac address and employs ixEthDBKeyXORHash() - * to do the actual hashing. - * Used only to add a whole entry to a hash table, as opposed to searching which - * takes only a key and uses the key hashing directly. - * - * @see ixEthDBKeyXORHash() - * - * @return the hash value - * - * @internal - */ -UINT32 ixEthDBEntryXORHash(void *entry) -{ - MacDescriptor *descriptor = (MacDescriptor *) entry; - - return ixEthDBKeyXORHash(descriptor->macAddress); -} - -/** - * @brief hashes a mac address - * - * @param key pointer to a 6 byte structure (typically an IxEthDBMacAddr pointer) - * to be hashed - * - * Given a 6 bytes MAC address, the hash used is: - * - * hash(MAC[0:5]) = MAC[0:1] ^ MAC[2:3] ^ MAC[4:5] - * - * Used by the hash table to search and remove entries based - * solely on their keys (mac addresses). - * - * @return the hash value - * - * @internal - */ -UINT32 ixEthDBKeyXORHash(void *key) -{ - UINT32 hashValue; - UINT8 *value = (UINT8 *) key; - - hashValue = (value[5] << 8) | value[4]; - hashValue ^= (value[3] << 8) | value[2]; - hashValue ^= (value[1] << 8) | value[0]; - - return hashValue; -} - -/** - * @brief mac descriptor match function - * - * @param reference mac address (typically an IxEthDBMacAddr pointer) structure - * @param entry pointer to a mac descriptor whose key (mac address) is to be - * matched against the reference key - * - * Used by the hash table to retrieve entries. Hashing entries can produce - * collisions, i.e. descriptors with different mac addresses and the same - * hash value, where this function is used to differentiate entries. - * - * @retval true if the entry matches the reference key (equal addresses) - * @retval false if the entry does not match the reference key - * - * @internal - */ -BOOL ixEthDBAddressMatch(void *reference, void *entry) -{ - return (ixEthDBAddressCompare(reference, ((MacDescriptor *) entry)->macAddress) == 0); -} - -/** - * @brief compares two mac addresses - * - * @param mac1 first mac address to compare - * @param mac2 second mac address to compare - * - * This comparison works in a similar way to strcmp, producing similar results. - * Used to insert values keyed on mac addresses into binary search trees. - * - * @retval -1 if mac1 < mac2 - * @retval 0 if ma1 == mac2 - * @retval 1 if mac1 > mac2 - */ -UINT32 ixEthDBAddressCompare(UINT8 *mac1, UINT8 *mac2) -{ - UINT32 local_index; - - for (local_index = 0 ; local_index < IX_IEEE803_MAC_ADDRESS_SIZE ; local_index++) - { - if (mac1[local_index] > mac2[local_index]) - { - return 1; - } - else if (mac1[local_index] < mac2[local_index]) - { - return -1; - } - } - - return 0; -} - diff --git a/drivers/net/npe/IxEthDBMem.c b/drivers/net/npe/IxEthDBMem.c deleted file mode 100644 index 78fce4bd92..0000000000 --- a/drivers/net/npe/IxEthDBMem.c +++ /dev/null @@ -1,625 +0,0 @@ -/** - * @file IxEthDBDBMem.c - * - * @brief Memory handling routines for the MAC address database - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - - -#include "IxEthDB_p.h" - -IX_ETH_DB_PRIVATE HashNode *nodePool = NULL; -IX_ETH_DB_PRIVATE MacDescriptor *macPool = NULL; -IX_ETH_DB_PRIVATE MacTreeNode *treePool = NULL; - -IX_ETH_DB_PRIVATE HashNode nodePoolArea[NODE_POOL_SIZE]; -IX_ETH_DB_PRIVATE MacDescriptor macPoolArea[MAC_POOL_SIZE]; -IX_ETH_DB_PRIVATE MacTreeNode treePoolArea[TREE_POOL_SIZE]; - -IX_ETH_DB_PRIVATE IxOsalMutex nodePoolLock; -IX_ETH_DB_PRIVATE IxOsalMutex macPoolLock; -IX_ETH_DB_PRIVATE IxOsalMutex treePoolLock; - -#define LOCK_NODE_POOL { ixOsalMutexLock(&nodePoolLock, IX_OSAL_WAIT_FOREVER); } -#define UNLOCK_NODE_POOL { ixOsalMutexUnlock(&nodePoolLock); } - -#define LOCK_MAC_POOL { ixOsalMutexLock(&macPoolLock, IX_OSAL_WAIT_FOREVER); } -#define UNLOCK_MAC_POOL { ixOsalMutexUnlock(&macPoolLock); } - -#define LOCK_TREE_POOL { ixOsalMutexLock(&treePoolLock, IX_OSAL_WAIT_FOREVER); } -#define UNLOCK_TREE_POOL { ixOsalMutexUnlock(&treePoolLock); } - -/* private function prototypes */ -IX_ETH_DB_PRIVATE MacDescriptor* ixEthDBPoolAllocMacDescriptor(void); -IX_ETH_DB_PRIVATE void ixEthDBPoolFreeMacDescriptor(MacDescriptor *macDescriptor); - -/** - * @addtogroup EthMemoryManagement - * - * @{ - */ - -/** - * @brief initializes the memory pools used by the ethernet database component - * - * Initializes the hash table node, mac descriptor and mac tree node pools. - * Called at initialization time by @ref ixEthDBInit(). - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBInitMemoryPools(void) -{ - int local_index; - - /* HashNode pool */ - ixOsalMutexInit(&nodePoolLock); - - for (local_index = 0 ; local_index < NODE_POOL_SIZE ; local_index++) - { - HashNode *freeNode = &nodePoolArea[local_index]; - - freeNode->nextFree = nodePool; - nodePool = freeNode; - } - - /* MacDescriptor pool */ - ixOsalMutexInit(&macPoolLock); - - for (local_index = 0 ; local_index < MAC_POOL_SIZE ; local_index++) - { - MacDescriptor *freeDescriptor = &macPoolArea[local_index]; - - freeDescriptor->nextFree = macPool; - macPool = freeDescriptor; - } - - /* MacTreeNode pool */ - ixOsalMutexInit(&treePoolLock); - - for (local_index = 0 ; local_index < TREE_POOL_SIZE ; local_index++) - { - MacTreeNode *freeNode = &treePoolArea[local_index]; - - freeNode->nextFree = treePool; - treePool = freeNode; - } -} - -/** - * @brief allocates a hash node from the pool - * - * Allocates a hash node and resets its value. - * - * @return the allocated hash node or NULL if the pool is empty - * - * @internal - */ -IX_ETH_DB_PUBLIC -HashNode* ixEthDBAllocHashNode(void) -{ - HashNode *allocatedNode = NULL; - - if (nodePool != NULL) - { - LOCK_NODE_POOL; - - allocatedNode = nodePool; - nodePool = nodePool->nextFree; - - UNLOCK_NODE_POOL; - - memset(allocatedNode, 0, sizeof(HashNode)); - } - - return allocatedNode; -} - -/** - * @brief frees a hash node into the pool - * - * @param hashNode node to be freed - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBFreeHashNode(HashNode *hashNode) -{ - if (hashNode != NULL) - { - LOCK_NODE_POOL; - - hashNode->nextFree = nodePool; - nodePool = hashNode; - - UNLOCK_NODE_POOL; - } -} - -/** - * @brief allocates a mac descriptor from the pool - * - * Allocates a mac descriptor and resets its value. - * This function is not used directly, instead @ref ixEthDBAllocMacDescriptor() - * is used, which keeps track of the pointer reference count. - * - * @see ixEthDBAllocMacDescriptor() - * - * @warning this function is not used directly by any other function - * apart from ixEthDBAllocMacDescriptor() - * - * @return the allocated mac descriptor or NULL if the pool is empty - * - * @internal - */ -IX_ETH_DB_PRIVATE -MacDescriptor* ixEthDBPoolAllocMacDescriptor(void) -{ - MacDescriptor *allocatedDescriptor = NULL; - - if (macPool != NULL) - { - LOCK_MAC_POOL; - - allocatedDescriptor = macPool; - macPool = macPool->nextFree; - - UNLOCK_MAC_POOL; - - memset(allocatedDescriptor, 0, sizeof(MacDescriptor)); - } - - return allocatedDescriptor; -} - -/** - * @brief allocates and initializes a mac descriptor smart pointer - * - * Uses @ref ixEthDBPoolAllocMacDescriptor() to allocate a mac descriptor - * from the pool and initializes its reference count. - * - * @see ixEthDBPoolAllocMacDescriptor() - * - * @return the allocated mac descriptor or NULL if the pool is empty - * - * @internal - */ -IX_ETH_DB_PUBLIC -MacDescriptor* ixEthDBAllocMacDescriptor(void) -{ - MacDescriptor *allocatedDescriptor = ixEthDBPoolAllocMacDescriptor(); - - if (allocatedDescriptor != NULL) - { - LOCK_MAC_POOL; - - allocatedDescriptor->refCount++; - - UNLOCK_MAC_POOL; - } - - return allocatedDescriptor; -} - -/** - * @brief frees a mac descriptor back into the pool - * - * @param macDescriptor mac descriptor to be freed - * - * @warning this function is not to be called by anyone but - * ixEthDBFreeMacDescriptor() - * - * @see ixEthDBFreeMacDescriptor() - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBPoolFreeMacDescriptor(MacDescriptor *macDescriptor) -{ - LOCK_MAC_POOL; - - macDescriptor->nextFree = macPool; - macPool = macDescriptor; - - UNLOCK_MAC_POOL; -} - -/** - * @brief frees or reduces the usage count of a mac descriptor smart pointer - * - * If the reference count reaches 0 (structure is no longer used anywhere) - * then the descriptor is freed back into the pool using ixEthDBPoolFreeMacDescriptor(). - * - * @see ixEthDBPoolFreeMacDescriptor() - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBFreeMacDescriptor(MacDescriptor *macDescriptor) -{ - if (macDescriptor != NULL) - { - LOCK_MAC_POOL; - - if (macDescriptor->refCount > 0) - { - macDescriptor->refCount--; - - if (macDescriptor->refCount == 0) - { - UNLOCK_MAC_POOL; - - ixEthDBPoolFreeMacDescriptor(macDescriptor); - } - else - { - UNLOCK_MAC_POOL; - } - } - else - { - UNLOCK_MAC_POOL; - } - } -} - -/** - * @brief clones a mac descriptor smart pointer - * - * @param macDescriptor mac descriptor to clone - * - * Increments the usage count of the smart pointer - * - * @returns the cloned smart pointer - * - * @internal - */ -IX_ETH_DB_PUBLIC -MacDescriptor* ixEthDBCloneMacDescriptor(MacDescriptor *macDescriptor) -{ - LOCK_MAC_POOL; - - if (macDescriptor->refCount == 0) - { - UNLOCK_MAC_POOL; - - return NULL; - } - - macDescriptor->refCount++; - - UNLOCK_MAC_POOL; - - return macDescriptor; -} - -/** - * @brief allocates a mac tree node from the pool - * - * Allocates and initializes a mac tree node from the pool. - * - * @return the allocated mac tree node or NULL if the pool is empty - * - * @internal - */ -IX_ETH_DB_PUBLIC -MacTreeNode* ixEthDBAllocMacTreeNode(void) -{ - MacTreeNode *allocatedNode = NULL; - - if (treePool != NULL) - { - LOCK_TREE_POOL; - - allocatedNode = treePool; - treePool = treePool->nextFree; - - UNLOCK_TREE_POOL; - - memset(allocatedNode, 0, sizeof(MacTreeNode)); - } - - return allocatedNode; -} - -/** - * @brief frees a mac tree node back into the pool - * - * @param macNode mac tree node to be freed - * - * @warning not to be used except from ixEthDBFreeMacTreeNode(). - * - * @see ixEthDBFreeMacTreeNode() - * - * @internal - */ -void ixEthDBPoolFreeMacTreeNode(MacTreeNode *macNode) -{ - if (macNode != NULL) - { - LOCK_TREE_POOL; - - macNode->nextFree = treePool; - treePool = macNode; - - UNLOCK_TREE_POOL; - } -} - -/** - * @brief frees or reduces the usage count of a mac tree node smart pointer - * - * @param macNode mac tree node to free - * - * Reduces the usage count of the given mac node. If the usage count - * reaches 0 the node is freed back into the pool using ixEthDBPoolFreeMacTreeNode() - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBFreeMacTreeNode(MacTreeNode *macNode) -{ - if (macNode->descriptor != NULL) - { - ixEthDBFreeMacDescriptor(macNode->descriptor); - } - - if (macNode->left != NULL) - { - ixEthDBFreeMacTreeNode(macNode->left); - } - - if (macNode->right != NULL) - { - ixEthDBFreeMacTreeNode(macNode->right); - } - - ixEthDBPoolFreeMacTreeNode(macNode); -} - -/** - * @brief clones a mac tree node - * - * @param macNode mac tree node to be cloned - * - * Increments the usage count of the node, its associated descriptor - * and recursively of all its child nodes. - * - * @warning this function is recursive and clones whole trees/subtrees, use only for - * root nodes - * - * @internal - */ -IX_ETH_DB_PUBLIC -MacTreeNode* ixEthDBCloneMacTreeNode(MacTreeNode *macNode) -{ - if (macNode != NULL) - { - MacTreeNode *clonedMacNode = ixEthDBAllocMacTreeNode(); - - if (clonedMacNode != NULL) - { - if (macNode->right != NULL) - { - clonedMacNode->right = ixEthDBCloneMacTreeNode(macNode->right); - } - - if (macNode->left != NULL) - { - clonedMacNode->left = ixEthDBCloneMacTreeNode(macNode->left); - } - - if (macNode->descriptor != NULL) - { - clonedMacNode->descriptor = ixEthDBCloneMacDescriptor(macNode->descriptor); - } - } - - return clonedMacNode; - } - else - { - return NULL; - } -} - -#ifndef NDEBUG -/* Debug statistical functions for memory usage */ - -extern HashTable dbHashtable; -int ixEthDBNumHashElements(void); - -int ixEthDBNumHashElements(void) -{ - UINT32 bucketIndex; - int numElements = 0; - HashTable *hashTable = &dbHashtable; - - for (bucketIndex = 0 ; bucketIndex < hashTable->numBuckets ; bucketIndex++) - { - if (hashTable->hashBuckets[bucketIndex] != NULL) - { - HashNode *node = hashTable->hashBuckets[bucketIndex]; - - while (node != NULL) - { - numElements++; - - node = node->next; - } - } - } - - return numElements; -} - -UINT32 ixEthDBSearchTreeUsageGet(MacTreeNode *tree) -{ - if (tree == NULL) - { - return 0; - } - else - { - return 1 /* this node */ + ixEthDBSearchTreeUsageGet(tree->left) + ixEthDBSearchTreeUsageGet(tree->right); - } -} - -int ixEthDBShowMemoryStatus(void) -{ - MacDescriptor *mac; - MacTreeNode *tree; - HashNode *node; - - int macCounter = 0; - int treeCounter = 0; - int nodeCounter = 0; - - int totalTreeUsage = 0; - int totalDescriptorUsage = 0; - int totalCloneDescriptorUsage = 0; - int totalNodeUsage = 0; - - UINT32 portIndex; - - LOCK_NODE_POOL; - LOCK_MAC_POOL; - LOCK_TREE_POOL; - - mac = macPool; - tree = treePool; - node = nodePool; - - while (mac != NULL) - { - macCounter++; - - mac = mac->nextFree; - - if (macCounter > MAC_POOL_SIZE) - { - break; - } - } - - while (tree != NULL) - { - treeCounter++; - - tree = tree->nextFree; - - if (treeCounter > TREE_POOL_SIZE) - { - break; - } - } - - while (node != NULL) - { - nodeCounter++; - - node = node->nextFree; - - if (nodeCounter > NODE_POOL_SIZE) - { - break; - } - } - - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - int treeUsage = ixEthDBSearchTreeUsageGet(ixEthDBPortInfo[portIndex].updateMethod.searchTree); - - totalTreeUsage += treeUsage; - totalCloneDescriptorUsage += treeUsage; /* each tree node contains a descriptor */ - } - - totalNodeUsage = ixEthDBNumHashElements(); - totalDescriptorUsage += totalNodeUsage; /* each hash table entry contains a descriptor */ - - UNLOCK_NODE_POOL; - UNLOCK_MAC_POOL; - UNLOCK_TREE_POOL; - - printf("Ethernet database memory usage stats:\n\n"); - - if (macCounter <= MAC_POOL_SIZE) - { - printf("\tMAC descriptor pool : %d free out of %d entries (%d%%)\n", macCounter, MAC_POOL_SIZE, macCounter * 100 / MAC_POOL_SIZE); - } - else - { - printf("\tMAC descriptor pool : invalid state (ring within the pool), normally %d entries\n", MAC_POOL_SIZE); - } - - if (treeCounter <= TREE_POOL_SIZE) - { - printf("\tTree node pool : %d free out of %d entries (%d%%)\n", treeCounter, TREE_POOL_SIZE, treeCounter * 100 / TREE_POOL_SIZE); - } - else - { - printf("\tTREE descriptor pool : invalid state (ring within the pool), normally %d entries\n", TREE_POOL_SIZE); - } - - if (nodeCounter <= NODE_POOL_SIZE) - { - printf("\tHash node pool : %d free out of %d entries (%d%%)\n", nodeCounter, NODE_POOL_SIZE, nodeCounter * 100 / NODE_POOL_SIZE); - } - else - { - printf("\tNODE descriptor pool : invalid state (ring within the pool), normally %d entries\n", NODE_POOL_SIZE); - } - - printf("\n"); - printf("\tMAC descriptor usage : %d entries, %d cloned\n", totalDescriptorUsage, totalCloneDescriptorUsage); - printf("\tTree node usage : %d entries\n", totalTreeUsage); - printf("\tHash node usage : %d entries\n", totalNodeUsage); - printf("\n"); - - /* search for duplicate nodes in the mac pool */ - { - MacDescriptor *reference = macPool; - - while (reference != NULL) - { - MacDescriptor *comparison = reference->nextFree; - - while (comparison != NULL) - { - if (reference == comparison) - { - printf("Warning: reached a duplicate (%p), invalid MAC pool state\n", reference); - - return 1; - } - - comparison = comparison->nextFree; - } - - reference = reference->nextFree; - } - } - - printf("No duplicates found in the MAC pool (sanity check ok)\n"); - - return 0; -} - -#endif /* NDEBUG */ - -/** - * @} EthMemoryManagement - */ diff --git a/drivers/net/npe/IxEthDBNPEAdaptor.c b/drivers/net/npe/IxEthDBNPEAdaptor.c deleted file mode 100644 index 30e1f61ab9..0000000000 --- a/drivers/net/npe/IxEthDBNPEAdaptor.c +++ /dev/null @@ -1,695 +0,0 @@ -/** - * @file IxEthDBDBNPEAdaptor.c - * - * @brief Routines that read and write learning/search trees in NPE-specific format - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxEthDB_p.h" -#include "IxEthDBLog_p.h" - -/* forward prototype declarations */ -IX_ETH_DB_PUBLIC void ixEthDBELTShow(IxEthDBPortId portID); -IX_ETH_DB_PUBLIC void ixEthDBShowNpeMsgHistory(void); - -/* data */ -UINT8* ixEthDBNPEUpdateArea[IX_ETH_DB_NUMBER_OF_PORTS]; -UINT32 dumpEltSize; - -/* private data */ -IX_ETH_DB_PRIVATE IxEthDBNoteWriteFn ixEthDBNPENodeWrite[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1]; - -#define IX_ETH_DB_MAX_DELTA_ZONES (6) /* at most 6 EP Delta zones, according to NPE FS */ -IX_ETH_DB_PRIVATE UINT32 ixEthDBEPDeltaOffset[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1][IX_ETH_DB_MAX_DELTA_ZONES]; -IX_ETH_DB_PRIVATE UINT32 ixEthDBEPDelta[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1][IX_ETH_DB_MAX_DELTA_ZONES]; - -/** - * @brief allocates non-cached or contiguous NPE tree update areas for all the ports - * - * This function is called only once at initialization time from - * @ref ixEthDBInit(). - * - * @warning do not call manually - * - * @see ixEthDBInit() - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBNPEUpdateAreasInit(void) -{ - UINT32 portIndex; - PortUpdateMethod *update; - - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - update = &ixEthDBPortInfo[portIndex].updateMethod; - - if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE) - { - update->npeUpdateZone = IX_OSAL_CACHE_DMA_MALLOC(FULL_ELT_BYTE_SIZE); - update->npeGwUpdateZone = IX_OSAL_CACHE_DMA_MALLOC(FULL_GW_BYTE_SIZE); - update->vlanUpdateZone = IX_OSAL_CACHE_DMA_MALLOC(FULL_VLAN_BYTE_SIZE); - - if (update->npeUpdateZone == NULL - || update->npeGwUpdateZone == NULL - || update->vlanUpdateZone == NULL) - { - ERROR_LOG("Fatal error: IX_ACC_DRV_DMA_MALLOC() returned NULL, no NPE update zones available\n"); - } - else - { - memset(update->npeUpdateZone, 0, FULL_ELT_BYTE_SIZE); - memset(update->npeGwUpdateZone, 0, FULL_GW_BYTE_SIZE); - memset(update->vlanUpdateZone, 0, FULL_VLAN_BYTE_SIZE); - } - } - else - { - /* unused */ - update->npeUpdateZone = NULL; - update->npeGwUpdateZone = NULL; - update->vlanUpdateZone = NULL; - } - } -} - -/** - * @brief deallocates the NPE update areas for all the ports - * - * This function is called at component de-initialization time - * by @ref ixEthDBUnload(). - * - * @warning do not call manually - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBNPEUpdateAreasUnload(void) -{ - UINT32 portIndex; - - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE) - { - IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.npeUpdateZone); - IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.npeGwUpdateZone); - IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.vlanUpdateZone); - } - } -} - -/** - * @brief general-purpose NPE callback function - * - * @param npeID NPE ID - * @param msg NPE message - * - * This function will unblock the caller by unlocking - * the npeAckLock mutex defined for each NPE port - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBNpeMsgAck(IxNpeMhNpeId npeID, IxNpeMhMessage msg) -{ - IxEthDBPortId portID = IX_ETH_DB_NPE_TO_PORT_ID(npeID); - PortInfo *portInfo; - - if (portID >= IX_ETH_DB_NUMBER_OF_PORTS) - { - /* invalid port */ - return; - } - - if (ixEthDBPortDefinitions[portID].type != IX_ETH_NPE) - { - /* not an NPE */ - return; - } - - portInfo = &ixEthDBPortInfo[portID]; - - ixOsalMutexUnlock(&portInfo->npeAckLock); -} - -/** - * @brief synchronizes the database with tree - * - * @param portID port ID of the NPE whose tree is to be scanned - * @param eltBaseAddress memory base address of the NPE serialized tree - * @param eltSize size in bytes of the NPE serialized tree - * - * Scans the NPE learning tree and resets the age of active database records. - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBNPESyncScan(IxEthDBPortId portID, void *eltBaseAddress, UINT32 eltSize) -{ - UINT32 eltEntryOffset; - UINT32 entryPortID; - - /* invalidate cache */ - IX_OSAL_CACHE_INVALIDATE(eltBaseAddress, eltSize); - - for (eltEntryOffset = ELT_ROOT_OFFSET ; eltEntryOffset < eltSize ; eltEntryOffset += ELT_ENTRY_SIZE) - { - /* (eltBaseAddress + eltEntryOffset) points to a valid NPE tree node - * - * the format of the node is MAC[6 bytes]:PortID[1 byte]:Reserved[6 bits]:Active[1 bit]:Valid[1 bit] - * therefore we can just use the pointer for database searches as only the first 6 bytes are checked - */ - void *eltNodeAddress = (void *) ((UINT32) eltBaseAddress + eltEntryOffset); - - /* debug */ - IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) checking node at offset %d...\n", eltEntryOffset / ELT_ENTRY_SIZE); - - if (IX_EDB_NPE_NODE_VALID(eltNodeAddress) != true) - { - IX_ETH_DB_NPE_VERBOSE_TRACE("\t... node is empty\n"); - } - else if (eltEntryOffset == ELT_ROOT_OFFSET) - { - IX_ETH_DB_NPE_VERBOSE_TRACE("\t... node is root\n"); - } - - if (IX_EDB_NPE_NODE_VALID(eltNodeAddress)) - { - entryPortID = IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(IX_EDB_NPE_NODE_PORT_ID(eltNodeAddress)); - - /* check only active entries belonging to this port */ - if (ixEthDBPortInfo[portID].agingEnabled && IX_EDB_NPE_NODE_ACTIVE(eltNodeAddress) && (portID == entryPortID) - && ((ixEthDBPortDefinitions[portID].capabilities & IX_ETH_ENTRY_AGING) == 0)) - { - /* search record */ - HashNode *node = ixEthDBSearch((IxEthDBMacAddr *) eltNodeAddress, IX_ETH_DB_ALL_FILTERING_RECORDS); - - /* safety check, maybe user deleted record right before sync? */ - if (node != NULL) - { - /* found record */ - MacDescriptor *descriptor = (MacDescriptor *) node->data; - - IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) synced entry [%s] already in the database, updating fields\n", mac2string(eltNodeAddress)); - - /* reset age - set to -1 so that maintenance will restore it to 0 (or more) when incrementing */ - if (!descriptor->recordData.filteringData.staticEntry) - { - if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) - { - descriptor->recordData.filteringData.age = AGE_RESET; - } - else if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) - { - descriptor->recordData.filteringVlanData.age = AGE_RESET; - } - } - - /* end transaction */ - ixEthDBReleaseHashNode(node); - } - } - else - { - IX_ETH_DB_NPE_VERBOSE_TRACE("\t... found portID %d, we check only port %d\n", entryPortID, portID); - } - } - } -} - -/** - * @brief writes a search tree in NPE format - * - * @param type type of records to be written into the NPE update zone - * @param totalSize maximum size of the linearized tree - * @param baseAddress memory base address where to write the NPE tree into - * @param tree search tree to write in NPE format - * @param blocks number of written 64-byte blocks - * @param startIndex optimal binary search start index - * - * Serializes the given tree in NPE linear format - * - * @return none - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBNPETreeWrite(IxEthDBRecordType type, UINT32 totalSize, void *baseAddress, MacTreeNode *tree, UINT32 *epDelta, UINT32 *blocks) -{ - MacTreeNodeStack *stack; - UINT32 maxOffset = 0; - UINT32 emptyOffset; - - stack = ixOsalCacheDmaMalloc(sizeof (MacTreeNodeStack)); - - if (stack == NULL) - { - ERROR_LOG("DB: (NPEAdaptor) failed to allocate the node stack for learning tree linearization, out of memory?\n"); - return; - } - - /* zero out empty root */ - memset(baseAddress, 0, ELT_ENTRY_SIZE); - - NODE_STACK_INIT(stack); - - if (tree != NULL) - { - /* push tree root at offset 1 */ - NODE_STACK_PUSH(stack, tree, 1); - - maxOffset = 1; - } - - while (NODE_STACK_NONEMPTY(stack)) - { - MacTreeNode *node; - UINT32 offset; - - NODE_STACK_POP(stack, node, offset); - - /* update maximum offset */ - if (offset > maxOffset) - { - maxOffset = offset; - } - - IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) writing MAC [%s] at offset %d\n", mac2string(node->descriptor->macAddress), offset); - - /* add node to NPE ELT at position indicated by offset */ - if (offset < MAX_ELT_SIZE) - { - ixEthDBNPENodeWrite[type]((void *) (((UINT32) baseAddress) + offset * ELT_ENTRY_SIZE), node); - } - - if (node->left != NULL) - { - NODE_STACK_PUSH(stack, node->left, LEFT_CHILD_OFFSET(offset)); - } - else - { - /* ensure this entry is zeroed */ - memset((void *) ((UINT32) baseAddress + LEFT_CHILD_OFFSET(offset) * ELT_ENTRY_SIZE), 0, ELT_ENTRY_SIZE); - } - - if (node->right != NULL) - { - NODE_STACK_PUSH(stack, node->right, RIGHT_CHILD_OFFSET(offset)); - } - else - { - /* ensure this entry is zeroed */ - memset((void *) ((UINT32) baseAddress + RIGHT_CHILD_OFFSET(offset) * ELT_ENTRY_SIZE), 0, ELT_ENTRY_SIZE); - } - } - - emptyOffset = maxOffset + 1; - - /* zero out rest of the tree */ - IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Emptying tree from offset %d, address 0x%08X, %d bytes\n", - emptyOffset, ((UINT32) baseAddress) + emptyOffset * ELT_ENTRY_SIZE, totalSize - (emptyOffset * ELT_ENTRY_SIZE)); - - if (emptyOffset < MAX_ELT_SIZE - 1) - { - memset((void *) (((UINT32) baseAddress) + (emptyOffset * ELT_ENTRY_SIZE)), 0, totalSize - (emptyOffset * ELT_ENTRY_SIZE)); - } - - /* flush cache */ - IX_OSAL_CACHE_FLUSH(baseAddress, totalSize); - - /* debug */ - IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Ethernet learning/filtering tree XScale wrote at address 0x%08X (max %d bytes):\n\n", - (UINT32) baseAddress, FULL_ELT_BYTE_SIZE); - - IX_ETH_DB_NPE_DUMP_ELT(baseAddress, FULL_ELT_BYTE_SIZE); - - /* compute number of 64-byte blocks */ - if (blocks != NULL) - { - *blocks = maxOffset != 0 ? 1 + maxOffset / 8 : 0; - - IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Wrote %d 64-byte blocks\n", *blocks); - } - - /* compute epDelta - start index for binary search */ - if (epDelta != NULL) - { - UINT32 deltaIndex = 0; - - *epDelta = 0; - - for (; deltaIndex < IX_ETH_DB_MAX_DELTA_ZONES ; deltaIndex ++) - { - if (ixEthDBEPDeltaOffset[type][deltaIndex] >= maxOffset) - { - *epDelta = ixEthDBEPDelta[type][deltaIndex]; - break; - } - } - - IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Computed epDelta %d (based on maxOffset %d)\n", *epDelta, maxOffset); - } - - ixOsalCacheDmaFree(stack); -} - -/** - * @brief implements a dummy node serialization function - * - * @param address address of where the node is to be serialized (unused) - * @param node tree node to be serialized (unused) - * - * This function is registered for safety reasons and should - * never be called. It will display an error message if this - * function is called. - * - * @return none - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBNullSerialize(void *address, MacTreeNode *node) -{ - IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Warning, the NullSerialize function was called, wrong record type?\n"); -} - -/** - * @brief writes a filtering entry in NPE linear format - * - * @param address memory address to write node to - * @param node node to be written - * - * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree - * in NPE-readable format. - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBNPELearningNodeWrite(void *address, MacTreeNode *node) -{ - /* copy mac address */ - memcpy(address, node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE); - - /* copy port ID */ - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_PORT_ID_OFFSET) = IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(node->descriptor->portID); - - /* copy flags (valid and not active, as the NPE sets it to active) and clear reserved section (bits 2-7) */ - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET) = (UINT8) IX_EDB_FLAGS_INACTIVE_VALID; - - IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) writing ELT node 0x%08x:0x%08x\n", * (UINT32 *) address, * (((UINT32 *) (address)) + 1)); -} - -/** - * @brief writes a WiFi header conversion record in - * NPE linear format - * - * @param address memory address to write node to - * @param node node to be written - * - * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree - * in NPE-readable format. - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBNPEWiFiNodeWrite(void *address, MacTreeNode *node) -{ - /* copy mac address */ - memcpy(address, node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE); - - /* copy index */ - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_WIFI_INDEX_OFFSET) = node->descriptor->recordData.wifiData.gwAddressIndex; - - /* copy flags (type and valid) */ - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_WIFI_FLAGS_OFFSET) = node->descriptor->recordData.wifiData.type << 1 | IX_EDB_FLAGS_VALID; -} - -/** - * @brief writes a WiFi gateway header conversion record in - * NPE linear format - * - * @param address memory address to write node to - * @param node node to be written - * - * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree - * in NPE-readable format. - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBNPEGatewayNodeWrite(void *address, MacTreeNode *node) -{ - /* copy mac address */ - memcpy(address, node->descriptor->recordData.wifiData.gwMacAddress, IX_IEEE803_MAC_ADDRESS_SIZE); - - /* set reserved field, two bytes */ - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET) = 0; - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET + 1) = 0; -} - -/** - * @brief writes a firewall record in - * NPE linear format - * - * @param address memory address to write node to - * @param node node to be written - * - * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree - * in NPE-readable format. - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBNPEFirewallNodeWrite(void *address, MacTreeNode *node) -{ - /* set reserved field */ - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET) = 0; - - /* set flags */ - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_FLAGS_OFFSET) = IX_EDB_FLAGS_VALID; - - /* copy mac address */ - memcpy((void *) ((UINT32) address + IX_EDB_NPE_NODE_FW_ADDR_OFFSET), node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE); -} - -/** - * @brief registers the NPE serialization methods - * - * This functions registers NPE serialization methods - * for writing the following types of records in NPE - * readable linear format: - * - filtering records - * - WiFi header conversion records - * - WiFi gateway header conversion records - * - firewall records - * - * Note that this function should be called by the - * component initialization function. - * - * @return number of registered record types - * - * @internal - */ -IX_ETH_DB_PUBLIC -UINT32 ixEthDBRecordSerializeMethodsRegister() -{ - int i; - - /* safety - register a blank method for everybody first */ - for ( i = 0 ; i < IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1 ; i++) - { - ixEthDBNPENodeWrite[i] = ixEthDBNullSerialize; - } - - /* register real methods */ - ixEthDBNPENodeWrite[IX_ETH_DB_FILTERING_RECORD] = ixEthDBNPELearningNodeWrite; - ixEthDBNPENodeWrite[IX_ETH_DB_FILTERING_VLAN_RECORD] = ixEthDBNPELearningNodeWrite; - ixEthDBNPENodeWrite[IX_ETH_DB_WIFI_RECORD] = ixEthDBNPEWiFiNodeWrite; - ixEthDBNPENodeWrite[IX_ETH_DB_FIREWALL_RECORD] = ixEthDBNPEFirewallNodeWrite; - ixEthDBNPENodeWrite[IX_ETH_DB_GATEWAY_RECORD] = ixEthDBNPEGatewayNodeWrite; - - /* EP Delta arrays */ - memset(ixEthDBEPDeltaOffset, 0, sizeof (ixEthDBEPDeltaOffset)); - memset(ixEthDBEPDelta, 0, sizeof (ixEthDBEPDelta)); - - /* filtering records */ - ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][0] = 1; - ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][0] = 0; - - ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][1] = 3; - ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][1] = 7; - - ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][2] = 511; - ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][2] = 14; - - /* wifi records */ - ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][0] = 1; - ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][0] = 0; - - ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][1] = 3; - ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][1] = 7; - - ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][2] = 511; - ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][2] = 14; - - /* firewall records */ - ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][0] = 0; - ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][0] = 0; - - ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][1] = 1; - ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][1] = 5; - - ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][2] = 3; - ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][2] = 13; - - ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][3] = 7; - ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][3] = 21; - - ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][4] = 15; - ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][4] = 29; - - ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][5] = 31; - ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][5] = 37; - - return 5; /* 5 methods registered */ -} - -#ifndef IX_NDEBUG - -IX_ETH_DB_PUBLIC UINT32 npeMsgHistory[IX_ETH_DB_NPE_MSG_HISTORY_DEPTH][2]; -IX_ETH_DB_PUBLIC UINT32 npeMsgHistoryLen = 0; - -/** - * When compiled in DEBUG mode, this function can be used to display - * the history of messages sent to the NPEs (up to 100). - */ -IX_ETH_DB_PUBLIC -void ixEthDBShowNpeMsgHistory() -{ - UINT32 i = 0; - UINT32 base, len; - - if (npeMsgHistoryLen <= IX_ETH_DB_NPE_MSG_HISTORY_DEPTH) - { - base = 0; - len = npeMsgHistoryLen; - } - else - { - base = npeMsgHistoryLen % IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; - len = IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; - } - - printf("NPE message history [last %d messages, from least to most recent]:\n", len); - - for (; i < len ; i++) - { - UINT32 pos = (base + i) % IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; - printf("msg[%d]: 0x%08x:0x%08x\n", i, npeMsgHistory[pos][0], npeMsgHistory[pos][1]); - } -} - -IX_ETH_DB_PUBLIC -void ixEthDBELTShow(IxEthDBPortId portID) -{ - IxNpeMhMessage message; - IX_STATUS result; - - /* send EDB_GetMACAddressDatabase message */ - FILL_GETMACADDRESSDATABASE(message, - 0 /* reserved */, - IX_OSAL_MMU_VIRT_TO_PHYS(ixEthDBPortInfo[portID].updateMethod.npeUpdateZone)); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - if (result == IX_SUCCESS) - { - /* analyze NPE copy */ - UINT32 eltEntryOffset; - UINT32 entryPortID; - - UINT32 eltBaseAddress = (UINT32) ixEthDBPortInfo[portID].updateMethod.npeUpdateZone; - UINT32 eltSize = FULL_ELT_BYTE_SIZE; - - /* invalidate cache */ - IX_OSAL_CACHE_INVALIDATE((void *) eltBaseAddress, eltSize); - - printf("Listing records in main learning tree for port %d\n", portID); - - for (eltEntryOffset = ELT_ROOT_OFFSET ; eltEntryOffset < eltSize ; eltEntryOffset += ELT_ENTRY_SIZE) - { - /* (eltBaseAddress + eltEntryOffset) points to a valid NPE tree node - * - * the format of the node is MAC[6 bytes]:PortID[1 byte]:Reserved[6 bits]:Active[1 bit]:Valid[1 bit] - * therefore we can just use the pointer for database searches as only the first 6 bytes are checked - */ - void *eltNodeAddress = (void *) ((UINT32) eltBaseAddress + eltEntryOffset); - - if (IX_EDB_NPE_NODE_VALID(eltNodeAddress)) - { - HashNode *node; - - entryPortID = IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(IX_EDB_NPE_NODE_PORT_ID(eltNodeAddress)); - - /* search record */ - node = ixEthDBSearch((IxEthDBMacAddr *) eltNodeAddress, IX_ETH_DB_ALL_RECORD_TYPES); - - printf("%s - port %d - %s ", mac2string((unsigned char *) eltNodeAddress), entryPortID, - IX_EDB_NPE_NODE_ACTIVE(eltNodeAddress) ? "active" : "inactive"); - - /* safety check, maybe user deleted record right before sync? */ - if (node != NULL) - { - /* found record */ - MacDescriptor *descriptor = (MacDescriptor *) node->data; - - printf("- %s ", - descriptor->type == IX_ETH_DB_FILTERING_RECORD ? "filtering" : - descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD ? "vlan" : - descriptor->type == IX_ETH_DB_WIFI_RECORD ? "wifi" : "other (check main DB)"); - - if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) printf("- age %d - %s ", - descriptor->recordData.filteringData.age, - descriptor->recordData.filteringData.staticEntry ? "static" : "dynamic"); - - if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) printf("- age %d - %s - tci %d ", - descriptor->recordData.filteringVlanData.age, - descriptor->recordData.filteringVlanData.staticEntry ? "static" : "dynamic", - descriptor->recordData.filteringVlanData.ieee802_1qTag); - - /* end transaction */ - ixEthDBReleaseHashNode(node); - } - else - { - printf("- not synced"); - } - - printf("\n"); - } - } - } - else - { - ixOsalLog(IX_OSAL_LOG_LVL_FATAL, IX_OSAL_LOG_DEV_STDOUT, - "EthDB: (ShowELT) Could not complete action (communication failure)\n", - portID, 0, 0, 0, 0, 0); - } -} - -#endif diff --git a/drivers/net/npe/IxEthDBPortUpdate.c b/drivers/net/npe/IxEthDBPortUpdate.c deleted file mode 100644 index 92af331a54..0000000000 --- a/drivers/net/npe/IxEthDBPortUpdate.c +++ /dev/null @@ -1,716 +0,0 @@ -/** - * @file IxEthDBDBPortUpdate.c - * - * @brief Implementation of dependency and port update handling - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxEthDB_p.h" - -/* forward prototype declarations */ -IX_ETH_DB_PRIVATE MacTreeNode* ixEthDBTreeInsert(MacTreeNode *searchTree, MacDescriptor *descriptor); -IX_ETH_DB_PRIVATE void ixEthDBCreateTrees(IxEthDBPortMap updatePorts); -IX_ETH_DB_PRIVATE MacTreeNode* ixEthDBTreeRebalance(MacTreeNode *searchTree); -IX_ETH_DB_PRIVATE void ixEthDBRebalanceTreeToVine(MacTreeNode *root, UINT32 *size); -IX_ETH_DB_PRIVATE void ixEthDBRebalanceVineToTree(MacTreeNode *root, UINT32 size); -IX_ETH_DB_PRIVATE void ixEthDBRebalanceCompression(MacTreeNode *root, UINT32 count); -IX_ETH_DB_PRIVATE UINT32 ixEthDBRebalanceLog2Floor(UINT32 x); - -extern HashTable dbHashtable; - -/** - * @brief register types requiring automatic updates - * - * @param typeArray array indexed on record types, each - * element indicating whether the record type requires an - * automatic update (true) or not (false) - * - * Automatic updates are done for registered record types - * upon adding, updating (that is, updating the record portID) - * and removing records. Whenever an automatic update is triggered - * the appropriate ports will be provided with new database - * information. - * - * It is assumed that the typeArray parameter is allocated large - * enough to hold all the user defined types. Also, the type - * array should be initialized to false as this function only - * caters for types which do require automatic updates. - * - * Note that this function should be called by the component - * initialization function. - * - * @return number of record types registered for automatic - * updates - * - * @internal - */ -IX_ETH_DB_PUBLIC -UINT32 ixEthDBUpdateTypeRegister(BOOL *typeArray) -{ - typeArray[IX_ETH_DB_FILTERING_RECORD] = true; - typeArray[IX_ETH_DB_FILTERING_VLAN_RECORD] = true; - - return 2; -} - -/** - * @brief computes dependencies and triggers port learning tree updates - * - * @param triggerPorts port map consisting in the ports which triggered the update - * - * This function browses through all the ports and determines how to waterfall the update - * event from the trigger ports to all other ports depending on them. - * - * Once the list of ports to be updated is determined this function - * calls @ref ixEthDBCreateTrees. - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBUpdatePortLearningTrees(IxEthDBPortMap triggerPorts) -{ - IxEthDBPortMap updatePorts; - UINT32 portIndex; - - ixEthDBUpdateLock(); - - SET_EMPTY_DEPENDENCY_MAP(updatePorts); - - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - PortInfo *port = &ixEthDBPortInfo[portIndex]; - BOOL mapsCollide; - - MAPS_COLLIDE(mapsCollide, triggerPorts, port->dependencyPortMap); - - if (mapsCollide /* do triggers influence this port? */ - && !IS_PORT_INCLUDED(portIndex, updatePorts) /* and it's not already in the update list */ - && port->updateMethod.updateEnabled) /* and we're allowed to update it */ - { - IX_ETH_DB_UPDATE_TRACE("DB: (Update) Adding port %d to update set\n", portIndex); - - JOIN_PORT_TO_MAP(updatePorts, portIndex); - } - else - { - IX_ETH_DB_UPDATE_TRACE("DB: (Update) Didn't add port %d to update set, reasons follow:\n", portIndex); - - if (!mapsCollide) - { - IX_ETH_DB_UPDATE_TRACE("\tMaps don't collide on port %d\n", portIndex); - } - - if (IS_PORT_INCLUDED(portIndex, updatePorts)) - { - IX_ETH_DB_UPDATE_TRACE("\tPort %d is already in the update set\n", portIndex); - } - - if (!port->updateMethod.updateEnabled) - { - IX_ETH_DB_UPDATE_TRACE("\tPort %d doesn't have updateEnabled set\n", portIndex); - } - } - } - - IX_ETH_DB_UPDATE_TRACE("DB: (Update) Updating port set\n"); - - ixEthDBCreateTrees(updatePorts); - - ixEthDBUpdateUnlock(); -} - -/** - * @brief creates learning trees and calls the port update handlers - * - * @param updatePorts set of ports in need of learning trees - * - * This function determines the optimal method of creating learning - * trees using a minimal number of database queries, keeping in mind - * that different ports can either use the same learning trees or they - * can partially share them. The actual tree building routine is - * @ref ixEthDBQuery. - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBCreateTrees(IxEthDBPortMap updatePorts) -{ - UINT32 portIndex; - BOOL result; - BOOL portsLeft = true; - - while (portsLeft) - { - /* get port with minimal dependency map and NULL search tree */ - UINT32 minPortIndex = MAX_PORT_SIZE; - UINT32 minimalSize = MAX_PORT_SIZE; - - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - UINT32 size; - PortInfo *port = &ixEthDBPortInfo[portIndex]; - - /* generate trees only for ports that need them */ - if (!port->updateMethod.searchTreePendingWrite && IS_PORT_INCLUDED(portIndex, updatePorts)) - { - GET_MAP_SIZE(port->dependencyPortMap, size); - - IX_ETH_DB_UPDATE_TRACE("DB: (Update) Dependency map for port %d: size %d\n", - portIndex, size); - - if (size < minimalSize) - { - minPortIndex = portIndex; - minimalSize = size; - } - } - else - { - IX_ETH_DB_UPDATE_TRACE("DB: (Update) Skipped port %d from tree diff (%s)\n", portIndex, - port->updateMethod.searchTreePendingWrite ? "pending write access" : "ignored by query"); - } - } - - /* if a port was found than minimalSize is not MAX_PORT_SIZE */ - if (minimalSize != MAX_PORT_SIZE) - { - /* minPortIndex is the port we seek */ - PortInfo *port = &ixEthDBPortInfo[minPortIndex]; - - IxEthDBPortMap query; - MacTreeNode *baseTree; - - /* now try to find a port with minimal map difference */ - PortInfo *minimalDiffPort = NULL; - UINT32 minimalDiff = MAX_PORT_SIZE; - - IX_ETH_DB_UPDATE_TRACE("DB: (Update) Minimal size port is %d\n", minPortIndex); - - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - PortInfo *diffPort = &ixEthDBPortInfo[portIndex]; - BOOL mapIsSubset; - - IS_MAP_SUBSET(mapIsSubset, diffPort->dependencyPortMap, port->dependencyPortMap); - - - if (portIndex != minPortIndex - && diffPort->updateMethod.searchTree != NULL - && mapIsSubset) - { - /* compute size and pick only minimal size difference */ - UINT32 diffPortSize; - UINT32 sizeDifference; - - GET_MAP_SIZE(diffPort->dependencyPortMap, diffPortSize); - - IX_ETH_DB_UPDATE_TRACE("DB: (Update) Checking port %d for differences...\n", portIndex); - - sizeDifference = minimalSize - diffPortSize; - - if (sizeDifference < minimalDiff) - { - minimalDiffPort = diffPort; - minimalDiff = sizeDifference; - - IX_ETH_DB_UPDATE_TRACE("DB: (Update) Minimal difference 0x%x was found on port %d\n", - minimalDiff, portIndex); - } - } - } - - /* check if filtering is enabled on this port */ - if ((port->featureStatus & IX_ETH_DB_FILTERING) != 0) - { - /* if minimalDiff is not MAX_PORT_SIZE minimalDiffPort points to the most similar port */ - if (minimalDiff != MAX_PORT_SIZE) - { - baseTree = ixEthDBCloneMacTreeNode(minimalDiffPort->updateMethod.searchTree); - DIFF_MAPS(query, port->dependencyPortMap , minimalDiffPort->dependencyPortMap); - - IX_ETH_DB_UPDATE_TRACE("DB: (Update) Found minimal diff, extending tree %d on query\n", - minimalDiffPort->portID); - } - else /* .. otherwise no similar port was found, build tree from scratch */ - { - baseTree = NULL; - - COPY_DEPENDENCY_MAP(query, port->dependencyPortMap); - - IX_ETH_DB_UPDATE_TRACE("DB: (Update) No similar diff, creating tree from query\n"); - } - - IS_EMPTY_DEPENDENCY_MAP(result, query); - - if (!result) /* otherwise we don't need anything more on top of the cloned tree */ - { - IX_ETH_DB_UPDATE_TRACE("DB: (Update) Adding query tree to port %d\n", minPortIndex); - - /* build learning tree */ - port->updateMethod.searchTree = ixEthDBQuery(baseTree, query, IX_ETH_DB_ALL_FILTERING_RECORDS, MAX_ELT_SIZE); - } - else - { - IX_ETH_DB_UPDATE_TRACE("DB: (Update) Query is empty, assuming identical nearest tree\n"); - - port->updateMethod.searchTree = baseTree; - } - } - else - { - /* filtering is not enabled, will download an empty tree */ - if (port->updateMethod.searchTree != NULL) - { - ixEthDBFreeMacTreeNode(port->updateMethod.searchTree); - } - - port->updateMethod.searchTree = NULL; - } - - /* mark tree as valid */ - port->updateMethod.searchTreePendingWrite = true; - } - else - { - portsLeft = false; - - IX_ETH_DB_UPDATE_TRACE("DB: (Update) No trees to create this round\n"); - } - } - - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - PortInfo *updatePort = &ixEthDBPortInfo[portIndex]; - - if (updatePort->updateMethod.searchTreePendingWrite) - { - IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) Starting procedure to upload new search tree (%snull) into NPE %d\n", - updatePort->updateMethod.searchTree != NULL ? "not " : "", - portIndex); - - updatePort->updateMethod.updateHandler(portIndex, IX_ETH_DB_FILTERING_RECORD); - } - } -} - -/** - * @brief standard NPE update handler - * - * @param portID id of the port to be updated - * @param type record type to be pushed during this update - * - * The NPE update handler manages updating the NPE databases - * given a certain record type. - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBNPEUpdateHandler(IxEthDBPortId portID, IxEthDBRecordType type) -{ - UINT32 epDelta, blockCount; - IxNpeMhMessage message; - UINT32 treeSize = 0; - PortInfo *port = &ixEthDBPortInfo[portID]; - - /* size selection and type check */ - if (type == IX_ETH_DB_FILTERING_RECORD || type == IX_ETH_DB_WIFI_RECORD) - { - treeSize = FULL_ELT_BYTE_SIZE; - } - else if (type == IX_ETH_DB_FIREWALL_RECORD) - { - treeSize = FULL_FW_BYTE_SIZE; - } - else - { - return IX_ETH_DB_INVALID_ARG; - } - - /* serialize tree into memory */ - ixEthDBNPETreeWrite(type, treeSize, port->updateMethod.npeUpdateZone, port->updateMethod.searchTree, &epDelta, &blockCount); - - /* free internal copy */ - if (port->updateMethod.searchTree != NULL) - { - ixEthDBFreeMacTreeNode(port->updateMethod.searchTree); - } - - /* forget last used search tree */ - port->updateMethod.searchTree = NULL; - port->updateMethod.searchTreePendingWrite = false; - - /* dependending on the update type we do different things */ - if (type == IX_ETH_DB_FILTERING_RECORD || type == IX_ETH_DB_WIFI_RECORD) - { - IX_STATUS result; - - FILL_SETMACADDRESSDATABASE_MSG(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), - epDelta, blockCount, - IX_OSAL_MMU_VIRT_TO_PHYS(port->updateMethod.npeUpdateZone)); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - if (result == IX_SUCCESS) - { - IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) Finished downloading NPE tree on port %d\n", portID); - } - else - { - ixEthDBPortInfo[portID].agingEnabled = false; - ixEthDBPortInfo[portID].updateMethod.updateEnabled = false; - ixEthDBPortInfo[portID].updateMethod.userControlled = true; - - ERROR_LOG("EthDB: (PortUpdate) disabling aging and updates on port %d (assumed dead)\n", portID); - - ixEthDBDatabaseClear(portID, IX_ETH_DB_ALL_RECORD_TYPES); - - return IX_ETH_DB_FAIL; - } - - return IX_ETH_DB_SUCCESS; - } - else if (type == IX_ETH_DB_FIREWALL_RECORD) - { - return ixEthDBFirewallUpdate(portID, port->updateMethod.npeUpdateZone, epDelta); - } - - return IX_ETH_DB_INVALID_ARG; -} - -/** - * @brief queries the database for a set of records to be inserted into a given tree - * - * @param searchTree pointer to a tree where insertions will be performed; can be NULL - * @param query set of ports that a database record must match to be inserted into the tree - * - * The query method browses through the database, extracts all the descriptors matching - * the given query parameter and inserts them into the given learning tree. - * Note that this is an append procedure, the given tree needs not to be empty. - * A "descriptor matching the query" is a descriptor whose port id is in the query map. - * If the given tree is empty (NULL) a new tree is created and returned. - * - * @return the tree root - * - * @internal - */ -IX_ETH_DB_PUBLIC -MacTreeNode* ixEthDBQuery(MacTreeNode *searchTree, IxEthDBPortMap query, IxEthDBRecordType recordFilter, UINT32 maxEntries) -{ - HashIterator iterator; - UINT32 entryCount = 0; - - /* browse database */ - BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator)); - - while (IS_ITERATOR_VALID(&iterator)) - { - MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data; - - IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) querying [%s]:%d on port map ... ", - mac2string(descriptor->macAddress), - descriptor->portID); - - if ((descriptor->type & recordFilter) != 0 - && IS_PORT_INCLUDED(descriptor->portID, query)) - { - MacDescriptor *descriptorClone = ixEthDBCloneMacDescriptor(descriptor); - - IX_ETH_DB_UPDATE_TRACE("match\n"); - - if (descriptorClone != NULL) - { - /* add descriptor to tree */ - searchTree = ixEthDBTreeInsert(searchTree, descriptorClone); - - entryCount++; - } - } - else - { - IX_ETH_DB_UPDATE_TRACE("no match\n"); - } - - if (entryCount < maxEntries) - { - /* advance to the next record */ - BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator)); - } - else - { - /* the NPE won't accept more entries so we can stop now */ - ixEthDBReleaseHashIterator(&iterator); - - IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) number of elements reached maximum supported by port\n"); - - break; - } - } - - IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) query inserted %d records in the search tree\n", entryCount); - - return ixEthDBTreeRebalance(searchTree); -} - -/** - * @brief inserts a mac descriptor into an tree - * - * @param searchTree tree where the insertion is to be performed (may be NULL) - * @param descriptor descriptor to insert into tree - * - * @return the tree root - * - * @internal - */ -IX_ETH_DB_PRIVATE -MacTreeNode* ixEthDBTreeInsert(MacTreeNode *searchTree, MacDescriptor *descriptor) -{ - MacTreeNode *currentNode = searchTree; - MacTreeNode *insertLocation = NULL; - MacTreeNode *newNode; - INT32 insertPosition = RIGHT; - - if (descriptor == NULL) - { - return searchTree; - } - - /* create a new node */ - newNode = ixEthDBAllocMacTreeNode(); - - if (newNode == NULL) - { - /* out of memory */ - ERROR_LOG("Warning: ixEthDBAllocMacTreeNode returned NULL in file %s:%d (out of memory?)\n", __FILE__, __LINE__); - - ixEthDBFreeMacDescriptor(descriptor); - - return NULL; - } - - /* populate node */ - newNode->descriptor = descriptor; - - /* an empty initial tree is a special case */ - if (searchTree == NULL) - { - return newNode; - } - - /* get insertion location */ - while (insertLocation == NULL) - { - MacTreeNode *nextNode; - - /* compare given key with current node key */ - insertPosition = ixEthDBAddressCompare(descriptor->macAddress, currentNode->descriptor->macAddress); - - /* navigate down */ - if (insertPosition == RIGHT) - { - nextNode = currentNode->right; - } - else if (insertPosition == LEFT) - { - nextNode = currentNode->left; - } - else - { - /* error, duplicate key */ - ERROR_LOG("Warning: trapped insertion of a duplicate MAC address in an NPE search tree\n"); - - /* this will free the MAC descriptor as well */ - ixEthDBFreeMacTreeNode(newNode); - - return searchTree; - } - - /* when we can no longer dive through the tree we found the insertion place */ - if (nextNode != NULL) - { - currentNode = nextNode; - } - else - { - insertLocation = currentNode; - } - } - - /* insert node */ - if (insertPosition == RIGHT) - { - insertLocation->right = newNode; - } - else - { - insertLocation->left = newNode; - } - - return searchTree; -} - -/** - * @brief balance a tree - * - * @param searchTree tree to balance - * - * Converts a tree into a balanced tree and returns the root of - * the balanced tree. The resulting tree is route balanced - * not perfectly balanced. This makes no difference to the - * average tree search time which is the same in both cases, O(log2(n)). - * - * @return root of the balanced tree or NULL if there's no memory left - * - * @internal - */ -IX_ETH_DB_PRIVATE -MacTreeNode* ixEthDBTreeRebalance(MacTreeNode *searchTree) -{ - MacTreeNode *pseudoRoot = ixEthDBAllocMacTreeNode(); - UINT32 size; - - if (pseudoRoot == NULL) - { - /* out of memory */ - return NULL; - } - - pseudoRoot->right = searchTree; - - ixEthDBRebalanceTreeToVine(pseudoRoot, &size); - ixEthDBRebalanceVineToTree(pseudoRoot, size); - - searchTree = pseudoRoot->right; - - /* remove pseudoRoot right branch, otherwise it will free the entire tree */ - pseudoRoot->right = NULL; - - ixEthDBFreeMacTreeNode(pseudoRoot); - - return searchTree; -} - -/** - * @brief converts a tree into a vine - * - * @param root root of tree to convert - * @param size depth of vine (equal to the number of nodes in the tree) - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBRebalanceTreeToVine(MacTreeNode *root, UINT32 *size) -{ - MacTreeNode *vineTail = root; - MacTreeNode *remainder = vineTail->right; - MacTreeNode *tempPtr; - - *size = 0; - - while (remainder != NULL) - { - if (remainder->left == NULL) - { - /* move tail down one */ - vineTail = remainder; - remainder = remainder->right; - (*size)++; - } - else - { - /* rotate around remainder */ - tempPtr = remainder->left; - remainder->left = tempPtr->right; - tempPtr->right = remainder; - remainder = tempPtr; - vineTail->right = tempPtr; - } - } -} - -/** - * @brief converts a vine into a balanced tree - * - * @param root vine to convert - * @param size depth of vine - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBRebalanceVineToTree(MacTreeNode *root, UINT32 size) -{ - UINT32 leafCount = size + 1 - (1 << ixEthDBRebalanceLog2Floor(size + 1)); - - ixEthDBRebalanceCompression(root, leafCount); - - size = size - leafCount; - - while (size > 1) - { - ixEthDBRebalanceCompression(root, size / 2); - - size /= 2; - } -} - -/** - * @brief compresses a vine/tree stage into a more balanced vine/tree - * - * @param root root of the tree to compress - * @param count number of "spine" nodes - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBRebalanceCompression(MacTreeNode *root, UINT32 count) -{ - MacTreeNode *scanner = root; - MacTreeNode *child; - UINT32 local_index; - - for (local_index = 0 ; local_index < count ; local_index++) - { - child = scanner->right; - scanner->right = child->right; - scanner = scanner->right; - child->right = scanner->left; - scanner->left = child; - } -} - -/** - * @brief computes |_log2(x)_| (a.k.a. floor(log2(x))) - * - * @param x number to compute |_log2(x)_| for - * - * @return |_log2(x)_| - * - * @internal - */ -IX_ETH_DB_PRIVATE -UINT32 ixEthDBRebalanceLog2Floor(UINT32 x) -{ - UINT32 log = 0; - UINT32 val = 1; - - while (val < x) - { - log++; - val <<= 1; - } - - return val == x ? log : log - 1; -} - diff --git a/drivers/net/npe/IxEthDBReports.c b/drivers/net/npe/IxEthDBReports.c deleted file mode 100644 index d74f1215fd..0000000000 --- a/drivers/net/npe/IxEthDBReports.c +++ /dev/null @@ -1,628 +0,0 @@ -/** - * @file IxEthDBAPI.c - * - * @brief Implementation of the public API - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxEthDB_p.h" - -extern HashTable dbHashtable; -IX_ETH_DB_PRIVATE void ixEthDBPortInfoShow(IxEthDBPortId portID, IxEthDBRecordType recordFilter); -IX_ETH_DB_PRIVATE IxEthDBStatus ixEthDBHeaderShow(IxEthDBRecordType recordFilter); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBDependencyPortMapShow(IxEthDBPortId portID, IxEthDBPortMap map); - -/** - * @brief displays a port dependency map - * - * @param portID ID of the port - * @param map port map to display - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBDependencyPortMapShow(IxEthDBPortId portID, IxEthDBPortMap map) -{ - UINT32 portIndex; - BOOL mapSelf = true, mapNone = true, firstPort = true; - - /* dependency port maps */ - printf("Dependency port map: "); - - /* browse the port map */ - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - if (IS_PORT_INCLUDED(portIndex, map)) - { - mapNone = false; - - if (portIndex != portID) - { - mapSelf = false; - } - - printf("%s%d", firstPort ? "{" : ", ", portIndex); - - firstPort = false; - } - } - - if (mapNone) - { - mapSelf = false; - } - - printf("%s (%s)\n", firstPort ? "" : "}", mapSelf ? "self" : mapNone ? "none" : "group"); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief displays all the filtering records belonging to a port - * - * @param portID ID of the port to display - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @warning deprecated, use @ref ixEthDBFilteringDatabaseShowRecords() - * instead. Calling this function is equivalent to calling - * ixEthDBFilteringDatabaseShowRecords(portID, IX_ETH_DB_FILTERING_RECORD) - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringDatabaseShow(IxEthDBPortId portID) -{ - IxEthDBStatus local_result; - HashIterator iterator; - PortInfo *portInfo; - UINT32 recordCount = 0; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - portInfo = &ixEthDBPortInfo[portID]; - - /* display table header */ - printf("Ethernet database records for port ID [%d]\n", portID); - - ixEthDBDependencyPortMapShow(portID, portInfo->dependencyPortMap); - - if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) - { - printf("NPE updates are %s\n\n", portInfo->updateMethod.updateEnabled ? "enabled" : "disabled"); - } - else - { - printf("updates disabled (not an NPE)\n\n"); - } - - printf(" MAC address | Age | Type \n"); - printf("___________________________________\n"); - - /* browse database */ - BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator)); - - while (IS_ITERATOR_VALID(&iterator)) - { - MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data; - - if (descriptor->portID == portID && descriptor->type == IX_ETH_DB_FILTERING_RECORD) - { - recordCount++; - - /* display entry */ - printf(" %02X:%02X:%02X:%02X:%02X:%02X | %5d | %s\n", - descriptor->macAddress[0], - descriptor->macAddress[1], - descriptor->macAddress[2], - descriptor->macAddress[3], - descriptor->macAddress[4], - descriptor->macAddress[5], - descriptor->recordData.filteringData.age, - descriptor->recordData.filteringData.staticEntry ? "static" : "dynamic"); - } - - /* move to the next record */ - BUSY_RETRY_WITH_RESULT(ixEthDBIncrementHashIterator(&dbHashtable, &iterator), local_result); - - /* debug */ - if (local_result == IX_ETH_DB_BUSY) - { - return IX_ETH_DB_FAIL; - } - } - - /* display number of records */ - printf("\nFound %d records\n", recordCount); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief displays all the filtering records belonging to all the ports - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @warning deprecated, use @ref ixEthDBFilteringDatabaseShowRecords() - * instead. Calling this function is equivalent to calling - * ixEthDBFilteringDatabaseShowRecords(IX_ETH_DB_ALL_PORTS, IX_ETH_DB_FILTERING_RECORD) - */ -IX_ETH_DB_PUBLIC -void ixEthDBFilteringDatabaseShowAll() -{ - IxEthDBPortId portIndex; - - printf("\nEthernet learning/filtering database: listing %d ports\n\n", (UINT32) IX_ETH_DB_NUMBER_OF_PORTS); - - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - ixEthDBFilteringDatabaseShow(portIndex); - - if (portIndex < IX_ETH_DB_NUMBER_OF_PORTS - 1) - { - printf("\n"); - } - } -} - -/** - * @brief displays one record in a format depending on the record filter - * - * @param descriptor pointer to the record - * @param recordFilter format filter - * - * This function will display the fields in a record depending on the - * selected record filter. - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBRecordShow(MacDescriptor *descriptor, IxEthDBRecordType recordFilter) -{ - if (recordFilter == IX_ETH_DB_FILTERING_VLAN_RECORD - || recordFilter == (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD)) - { - /* display VLAN record header - leave this commented code in place, its purpose is to align the print format with the header - printf(" MAC address | Age | Type | VLAN ID | CFI | QoS class \n"); - printf("___________________________________________________________________\n"); */ - - if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) - { - printf("%02X:%02X:%02X:%02X:%02X:%02X | %3d | %s | %d | %d | %d\n", - descriptor->macAddress[0], - descriptor->macAddress[1], - descriptor->macAddress[2], - descriptor->macAddress[3], - descriptor->macAddress[4], - descriptor->macAddress[5], - descriptor->recordData.filteringVlanData.age, - descriptor->recordData.filteringVlanData.staticEntry ? "static" : "dynamic", - IX_ETH_DB_GET_VLAN_ID(descriptor->recordData.filteringVlanData.ieee802_1qTag), - (descriptor->recordData.filteringVlanData.ieee802_1qTag & 0x1000) >> 12, - IX_ETH_DB_GET_QOS_PRIORITY(descriptor->recordData.filteringVlanData.ieee802_1qTag)); - } - else if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) - { - printf("%02X:%02X:%02X:%02X:%02X:%02X | %3d | %s | - | - | -\n", - descriptor->macAddress[0], - descriptor->macAddress[1], - descriptor->macAddress[2], - descriptor->macAddress[3], - descriptor->macAddress[4], - descriptor->macAddress[5], - descriptor->recordData.filteringData.age, - descriptor->recordData.filteringData.staticEntry ? "static" : "dynamic"); - } - } - else if (recordFilter == IX_ETH_DB_FILTERING_RECORD) - { - /* display filtering record header - leave this commented code in place, its purpose is to align the print format with the header - printf(" MAC address | Age | Type \n"); - printf("_______________________________________\n"); */ - - if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) - { - printf("%02X:%02X:%02X:%02X:%02X:%02X | %3d | %s \n", - descriptor->macAddress[0], - descriptor->macAddress[1], - descriptor->macAddress[2], - descriptor->macAddress[3], - descriptor->macAddress[4], - descriptor->macAddress[5], - descriptor->recordData.filteringData.age, - descriptor->recordData.filteringData.staticEntry ? "static" : "dynamic"); - } - } - else if (recordFilter == IX_ETH_DB_WIFI_RECORD) - { - /* display WiFi record header - leave this commented code in place, its purpose is to align the print format with the header - printf(" MAC address | GW MAC address \n"); - printf("_______________________________________\n"); */ - - if (descriptor->type == IX_ETH_DB_WIFI_RECORD) - { - if (descriptor->recordData.wifiData.type == IX_ETH_DB_WIFI_AP_TO_AP) - { - /* gateway address present */ - printf("%02X:%02X:%02X:%02X:%02X:%02X | %02X:%02X:%02X:%02X:%02X:%02X \n", - descriptor->macAddress[0], - descriptor->macAddress[1], - descriptor->macAddress[2], - descriptor->macAddress[3], - descriptor->macAddress[4], - descriptor->macAddress[5], - descriptor->recordData.wifiData.gwMacAddress[0], - descriptor->recordData.wifiData.gwMacAddress[1], - descriptor->recordData.wifiData.gwMacAddress[2], - descriptor->recordData.wifiData.gwMacAddress[3], - descriptor->recordData.wifiData.gwMacAddress[4], - descriptor->recordData.wifiData.gwMacAddress[5]); - } - else - { - /* no gateway */ - printf("%02X:%02X:%02X:%02X:%02X:%02X | ----no gateway----- \n", - descriptor->macAddress[0], - descriptor->macAddress[1], - descriptor->macAddress[2], - descriptor->macAddress[3], - descriptor->macAddress[4], - descriptor->macAddress[5]); - } - } - } - else if (recordFilter == IX_ETH_DB_FIREWALL_RECORD) - { - /* display Firewall record header - leave this commented code in place, its purpose is to align the print format with the header - printf(" MAC address \n"); - printf("__________________\n"); */ - - if (descriptor->type == IX_ETH_DB_FIREWALL_RECORD) - { - printf("%02X:%02X:%02X:%02X:%02X:%02X \n", - descriptor->macAddress[0], - descriptor->macAddress[1], - descriptor->macAddress[2], - descriptor->macAddress[3], - descriptor->macAddress[4], - descriptor->macAddress[5]); - } - } - else if (recordFilter == IX_ETH_DB_ALL_RECORD_TYPES) - { - /* display composite record header - leave this commented code in place, its purpose is to align the print format with the header - printf(" MAC address | Record | Age| Type | VLAN |CFI| QoS | GW MAC address \n"); - printf("_______________________________________________________________________________\n"); */ - - if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) - { - printf("%02X:%02X:%02X:%02X:%02X:%02X | VLAN | %2d | %s | %4d | %1d | %1d | -----------------\n", - descriptor->macAddress[0], - descriptor->macAddress[1], - descriptor->macAddress[2], - descriptor->macAddress[3], - descriptor->macAddress[4], - descriptor->macAddress[5], - descriptor->recordData.filteringVlanData.age, - descriptor->recordData.filteringVlanData.staticEntry ? "static " : "dynamic", - IX_ETH_DB_GET_VLAN_ID(descriptor->recordData.filteringVlanData.ieee802_1qTag), - (descriptor->recordData.filteringVlanData.ieee802_1qTag & 0x1000) >> 12, - IX_ETH_DB_GET_QOS_PRIORITY(descriptor->recordData.filteringVlanData.ieee802_1qTag)); - } - else if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) - { - printf("%02X:%02X:%02X:%02X:%02X:%02X | Filter | %2d | %s | ---- | - | --- | -----------------\n", - descriptor->macAddress[0], - descriptor->macAddress[1], - descriptor->macAddress[2], - descriptor->macAddress[3], - descriptor->macAddress[4], - descriptor->macAddress[5], - descriptor->recordData.filteringData.age, - descriptor->recordData.filteringData.staticEntry ? "static " : "dynamic"); - } - else if (descriptor->type == IX_ETH_DB_WIFI_RECORD) - { - if (descriptor->recordData.wifiData.type == IX_ETH_DB_WIFI_AP_TO_AP) - { - /* gateway address present */ - printf("%02X:%02X:%02X:%02X:%02X:%02X | WiFi | -- | AP=>AP | ---- | - | --- | %02X:%02X:%02X:%02X:%02X:%02X\n", - descriptor->macAddress[0], - descriptor->macAddress[1], - descriptor->macAddress[2], - descriptor->macAddress[3], - descriptor->macAddress[4], - descriptor->macAddress[5], - descriptor->recordData.wifiData.gwMacAddress[0], - descriptor->recordData.wifiData.gwMacAddress[1], - descriptor->recordData.wifiData.gwMacAddress[2], - descriptor->recordData.wifiData.gwMacAddress[3], - descriptor->recordData.wifiData.gwMacAddress[4], - descriptor->recordData.wifiData.gwMacAddress[5]); - } - else - { - /* no gateway */ - printf("%02X:%02X:%02X:%02X:%02X:%02X | WiFi | -- | AP=>ST | ---- | - | --- | -- no gateway -- \n", - descriptor->macAddress[0], - descriptor->macAddress[1], - descriptor->macAddress[2], - descriptor->macAddress[3], - descriptor->macAddress[4], - descriptor->macAddress[5]); - } - } - else if (descriptor->type == IX_ETH_DB_FIREWALL_RECORD) - { - printf("%02X:%02X:%02X:%02X:%02X:%02X | FW | -- | ------- | ---- | - | --- | -----------------\n", - descriptor->macAddress[0], - descriptor->macAddress[1], - descriptor->macAddress[2], - descriptor->macAddress[3], - descriptor->macAddress[4], - descriptor->macAddress[5]); - } - } - else - { - printf("invalid record filter\n"); - } -} - -/** - * @brief displays the status, records and configuration information of a port - * - * @param portID ID of the port - * @param recordFilter record filter to display - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBPortInfoShow(IxEthDBPortId portID, IxEthDBRecordType recordFilter) -{ - PortInfo *portInfo = &ixEthDBPortInfo[portID]; - UINT32 recordCount = 0; - HashIterator iterator; - IxEthDBStatus local_result; - - /* display port status */ - printf("== Port ID %d ==\n", portID); - - /* display capabilities */ - printf("- Capabilities: "); - - if ((portInfo->featureCapability & IX_ETH_DB_LEARNING) != 0) - { - printf("Learning (%s) ", ((portInfo->featureStatus & IX_ETH_DB_LEARNING) != 0) ? "on" : "off"); - } - - if ((portInfo->featureCapability & IX_ETH_DB_VLAN_QOS) != 0) - { - printf("VLAN/QoS (%s) ", ((portInfo->featureStatus & IX_ETH_DB_VLAN_QOS) != 0) ? "on" : "off"); - } - - if ((portInfo->featureCapability & IX_ETH_DB_FIREWALL) != 0) - { - printf("Firewall (%s) ", ((portInfo->featureStatus & IX_ETH_DB_FIREWALL) != 0) ? "on" : "off"); - } - - if ((portInfo->featureCapability & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0) - { - printf("WiFi (%s) ", ((portInfo->featureStatus & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0) ? "on" : "off"); - } - - if ((portInfo->featureCapability & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0) - { - printf("STP (%s) ", ((portInfo->featureStatus & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0) ? "on" : "off"); - } - - printf("\n"); - - /* dependency map */ - ixEthDBDependencyPortMapShow(portID, portInfo->dependencyPortMap); - - /* NPE dynamic updates */ - if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) - { - printf(" - NPE dynamic update is %s\n", portInfo->updateMethod.updateEnabled ? "enabled" : "disabled"); - } - else - { - printf(" - dynamic update disabled (not an NPE)\n"); - } - - if ((portInfo->featureCapability & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0) - { - if ((portInfo->featureStatus & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0) - { - /* WiFi header conversion */ - if ((portInfo->frameControlDurationID - + portInfo->bbsid[0] - + portInfo->bbsid[1] - + portInfo->bbsid[2] - + portInfo->bbsid[3] - + portInfo->bbsid[4] - + portInfo->bbsid[5]) == 0) - { - printf(" - WiFi header conversion not configured\n"); - } - else - { - printf(" - WiFi header conversion: BBSID [%02X:%02X:%02X:%02X:%02X:%02X], Frame Control 0x%X, Duration/ID 0x%X\n", - portInfo->bbsid[0], - portInfo->bbsid[1], - portInfo->bbsid[2], - portInfo->bbsid[3], - portInfo->bbsid[4], - portInfo->bbsid[5], - portInfo->frameControlDurationID >> 16, - portInfo->frameControlDurationID & 0xFFFF); - } - } - else - { - printf(" - WiFi header conversion not enabled\n"); - } - } - - /* Firewall */ - if ((portInfo->featureCapability & IX_ETH_DB_FIREWALL) != 0) - { - if ((portInfo->featureStatus & IX_ETH_DB_FIREWALL) != 0) - { - printf(" - Firewall is in %s-list mode\n", portInfo->firewallMode == IX_ETH_DB_FIREWALL_BLACK_LIST ? "black" : "white"); - printf(" - Invalid source MAC address filtering is %s\n", portInfo->srcAddressFilterEnabled ? "enabled" : "disabled"); - } - else - { - printf(" - Firewall not enabled\n"); - } - } - - /* browse database if asked to display records */ - if (recordFilter != IX_ETH_DB_NO_RECORD_TYPE) - { - printf("\n"); - ixEthDBHeaderShow(recordFilter); - - BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator)); - - while (IS_ITERATOR_VALID(&iterator)) - { - MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data; - - if (descriptor->portID == portID && (descriptor->type & recordFilter) != 0) - { - recordCount++; - - /* display entry */ - ixEthDBRecordShow(descriptor, recordFilter); - } - - /* move to the next record */ - BUSY_RETRY_WITH_RESULT(ixEthDBIncrementHashIterator(&dbHashtable, &iterator), local_result); - - /* debug */ - if (local_result == IX_ETH_DB_BUSY) - { - printf("EthDB (API): Error, database browser failed (no access), giving up\n"); - } - } - - printf("\nFound %d records\n\n", recordCount); - } -} - -/** - * @brief displays a record header - * - * @param recordFilter record type filter - * - * This function displays a record header, depending on - * the given record type filter. It is useful when used - * in conjunction with ixEthDBRecordShow which will display - * record fields formatted for the header, provided the same - * record filter is used. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or IX_ETH_DB_INVALID_ARG if the recordFilter - * parameter is invalid or not supported - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBHeaderShow(IxEthDBRecordType recordFilter) -{ - if (recordFilter == IX_ETH_DB_FILTERING_VLAN_RECORD - || recordFilter == (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD)) - { - /* display VLAN record header */ - printf(" MAC address | Age | Type | VLAN ID | CFI | QoS class \n"); - printf("___________________________________________________________________\n"); - } - else if (recordFilter == IX_ETH_DB_FILTERING_RECORD) - { - /* display filtering record header */ - printf(" MAC address | Age | Type \n"); - printf("_______________________________________\n"); - } - else if (recordFilter == IX_ETH_DB_WIFI_RECORD) - { - /* display WiFi record header */ - printf(" MAC address | GW MAC address \n"); - printf("_______________________________________\n"); - } - else if (recordFilter == IX_ETH_DB_FIREWALL_RECORD) - { - /* display Firewall record header */ - printf(" MAC address \n"); - printf("__________________\n"); - } - else if (recordFilter == IX_ETH_DB_ALL_RECORD_TYPES) - { - /* display composite record header */ - printf(" MAC address | Record | Age| Type | VLAN |CFI| QoS | GW MAC address \n"); - printf("_______________________________________________________________________________\n"); - } - else - { - return IX_ETH_DB_INVALID_ARG; - } - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief displays database information (records and port information) - * - * @param portID ID of the port to display (or IX_ETH_DB_ALL_PORTS for all the ports) - * @param recordFilter record filter (use IX_ETH_DB_NO_RECORD_TYPE to display only - * port information) - * - * Note that this function is documented in the main component header - * file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully or - * an appropriate error code otherwise - * - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBRecordType recordFilter) -{ - IxEthDBPortId currentPort; - BOOL showAllPorts = (portID == IX_ETH_DB_ALL_PORTS); - - IX_ETH_DB_CHECK_PORT_ALL(portID); - - printf("\nEthernet learning/filtering database: listing %d port(s)\n\n", showAllPorts ? (UINT32) IX_ETH_DB_NUMBER_OF_PORTS : 1); - - currentPort = showAllPorts ? 0 : portID; - - while (currentPort != IX_ETH_DB_NUMBER_OF_PORTS) - { - /* display port info */ - ixEthDBPortInfoShow(currentPort, recordFilter); - - /* next port */ - currentPort = showAllPorts ? currentPort + 1 : IX_ETH_DB_NUMBER_OF_PORTS; - } - - return IX_ETH_DB_SUCCESS; -} - diff --git a/drivers/net/npe/IxEthDBSearch.c b/drivers/net/npe/IxEthDBSearch.c deleted file mode 100644 index 4fd28da080..0000000000 --- a/drivers/net/npe/IxEthDBSearch.c +++ /dev/null @@ -1,303 +0,0 @@ -/** - * @file IxEthDBSearch.c - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxEthDB_p.h" - -extern HashTable dbHashtable; - -/** - * @brief matches two database records based on their MAC addresses - * - * @param untypedReference record to match against - * @param untypedEntry record to match - * - * @return true if the match is successful or false otherwise - * - * @internal - */ -IX_ETH_DB_PUBLIC -BOOL ixEthDBAddressRecordMatch(void *untypedReference, void *untypedEntry) -{ - MacDescriptor *entry = (MacDescriptor *) untypedEntry; - MacDescriptor *reference = (MacDescriptor *) untypedReference; - - /* check accepted record types */ - if ((entry->type & reference->type) == 0) return false; - - return (ixEthDBAddressCompare((UINT8 *) entry->macAddress, (UINT8 *) reference->macAddress) == 0); -} - -/** - * @brief matches two database records based on their MAC addresses - * and VLAN IDs - * - * @param untypedReference record to match against - * @param untypedEntry record to match - * - * @return true if the match is successful or false otherwise - * - * @internal - */ -IX_ETH_DB_PUBLIC -BOOL ixEthDBVlanRecordMatch(void *untypedReference, void *untypedEntry) -{ - MacDescriptor *entry = (MacDescriptor *) untypedEntry; - MacDescriptor *reference = (MacDescriptor *) untypedReference; - - /* check accepted record types */ - if ((entry->type & reference->type) == 0) return false; - - return (IX_ETH_DB_GET_VLAN_ID(entry->recordData.filteringVlanData.ieee802_1qTag) == - IX_ETH_DB_GET_VLAN_ID(reference->recordData.filteringVlanData.ieee802_1qTag)) && - (ixEthDBAddressCompare(entry->macAddress, reference->macAddress) == 0); -} - -/** - * @brief matches two database records based on their MAC addresses - * and port IDs - * - * @param untypedReference record to match against - * @param untypedEntry record to match - * - * @return true if the match is successful or false otherwise - * - * @internal - */ -IX_ETH_DB_PUBLIC -BOOL ixEthDBPortRecordMatch(void *untypedReference, void *untypedEntry) -{ - MacDescriptor *entry = (MacDescriptor *) untypedEntry; - MacDescriptor *reference = (MacDescriptor *) untypedReference; - - /* check accepted record types */ - if ((entry->type & reference->type) == 0) return false; - - return (entry->portID == reference->portID) && - (ixEthDBAddressCompare(entry->macAddress, reference->macAddress) == 0); -} - -/** - * @brief dummy matching function, registered for safety - * - * @param reference record to match against (unused) - * @param entry record to match (unused) - * - * This function is registered in the matching functions - * array on invalid types. Calling it will display an - * error message, indicating an error in the component logic. - * - * @return false - * - * @internal - */ -IX_ETH_DB_PUBLIC -BOOL ixEthDBNullMatch(void *reference, void *entry) -{ - /* display an error message */ - - ixOsalLog(IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, "DB: (Search) The NullMatch function was called, wrong key type?\n", 0, 0, 0, 0, 0, 0); - - - return false; -} - -/** - * @brief registers hash matching methods - * - * @param matchFunctions table of match functions to be populated - * - * This function registers the available record matching functions - * by indexing them on record types into the given function array. - * - * Note that it is compulsory to call this in ixEthDBInit(), - * otherwise hashtable searching and removal will not work - * - * @return number of registered functions - * - * @internal - */ -IX_ETH_DB_PUBLIC -UINT32 ixEthDBMatchMethodsRegister(MatchFunction *matchFunctions) -{ - UINT32 i; - - /* safety first */ - for ( i = 0 ; i < IX_ETH_DB_MAX_KEY_INDEX + 1 ; i++) - { - matchFunctions[i] = ixEthDBNullMatch; - } - - /* register MAC search method */ - matchFunctions[IX_ETH_DB_MAC_KEY] = ixEthDBAddressRecordMatch; - - /* register MAC/PortID search method */ - matchFunctions[IX_ETH_DB_MAC_PORT_KEY] = ixEthDBPortRecordMatch; - - /* register MAC/VLAN ID search method */ - matchFunctions[IX_ETH_DB_MAC_VLAN_KEY] = ixEthDBVlanRecordMatch; - - return 3; /* three methods */ -} - -/** - * @brief search a record in the Ethernet datbase - * - * @param macAddress MAC address to perform the search on - * @param typeFilter type of records to consider for matching - * - * @warning if searching is successful an implicit write lock - * to the search result is granted, therefore unlock the - * entry using @ref ixEthDBReleaseHashNode() as soon as possible. - * - * @see ixEthDBReleaseHashNode() - * - * @return the search result, or NULL if a record with the given - * MAC address was not found - * - * @internal - */ -IX_ETH_DB_PUBLIC -HashNode* ixEthDBSearch(IxEthDBMacAddr *macAddress, IxEthDBRecordType typeFilter) -{ - HashNode *searchResult = NULL; - MacDescriptor reference; - - TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER; - - if (macAddress == NULL) - { - return NULL; - } - - /* fill search fields */ - memcpy(reference.macAddress, macAddress, sizeof (IxEthDBMacAddr)); - - /* set acceptable record types */ - reference.type = typeFilter; - - BUSY_RETRY(ixEthDBSearchHashEntry(&dbHashtable, IX_ETH_DB_MAC_KEY, &reference, &searchResult)); - - return searchResult; -} - -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPeek(IxEthDBMacAddr *macAddress, IxEthDBRecordType typeFilter) -{ - MacDescriptor reference; - IxEthDBStatus result; - - TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER; - - if (macAddress == NULL) - { - return IX_ETH_DB_INVALID_ARG; - } - - /* fill search fields */ - memcpy(reference.macAddress, macAddress, sizeof (IxEthDBMacAddr)); - - /* set acceptable record types */ - reference.type = typeFilter; - - result = ixEthDBPeekHashEntry(&dbHashtable, IX_ETH_DB_MAC_KEY, &reference); - - return result; -} - -/** - * @brief search a record in the Ethernet datbase - * - * @param macAddress MAC address to perform the search on - * @param portID port ID to perform the search on - * @param typeFilter type of records to consider for matching - * - * @warning if searching is successful an implicit write lock - * to the search result is granted, therefore unlock the - * entry using @ref ixEthDBReleaseHashNode() as soon as possible. - * - * @see ixEthDBReleaseHashNode() - * - * @return the search result, or NULL if a record with the given - * MAC address/port ID combination was not found - * - * @internal - */ -IX_ETH_DB_PUBLIC -HashNode* ixEthDBPortSearch(IxEthDBMacAddr *macAddress, IxEthDBPortId portID, IxEthDBRecordType typeFilter) -{ - HashNode *searchResult = NULL; - MacDescriptor reference; - - if (macAddress == NULL) - { - return NULL; - } - - /* fill search fields */ - memcpy(reference.macAddress, macAddress, sizeof (IxEthDBMacAddr)); - reference.portID = portID; - - /* set acceptable record types */ - reference.type = typeFilter; - - BUSY_RETRY(ixEthDBSearchHashEntry(&dbHashtable, IX_ETH_DB_MAC_PORT_KEY, &reference, &searchResult)); - - return searchResult; -} - -/** - * @brief search a record in the Ethernet datbase - * - * @param macAddress MAC address to perform the search on - * @param vlanID VLAN ID to perform the search on - * @param typeFilter type of records to consider for matching - * - * @warning if searching is successful an implicit write lock - * to the search result is granted, therefore unlock the - * entry using @ref ixEthDBReleaseHashNode() as soon as possible. - * - * @see ixEthDBReleaseHashNode() - * - * @return the search result, or NULL if a record with the given - * MAC address/VLAN ID combination was not found - * - * @internal - */ -IX_ETH_DB_PUBLIC -HashNode* ixEthDBVlanSearch(IxEthDBMacAddr *macAddress, IxEthDBVlanId vlanID, IxEthDBRecordType typeFilter) -{ - HashNode *searchResult = NULL; - MacDescriptor reference; - - if (macAddress == NULL) - { - return NULL; - } - - /* fill search fields */ - memcpy(reference.macAddress, macAddress, sizeof (IxEthDBMacAddr)); - reference.recordData.filteringVlanData.ieee802_1qTag = - IX_ETH_DB_SET_VLAN_ID(reference.recordData.filteringVlanData.ieee802_1qTag, vlanID); - - /* set acceptable record types */ - reference.type = typeFilter; - - BUSY_RETRY(ixEthDBSearchHashEntry(&dbHashtable, IX_ETH_DB_MAC_VLAN_KEY, &reference, &searchResult)); - - return searchResult; -} diff --git a/drivers/net/npe/IxEthDBSpanningTree.c b/drivers/net/npe/IxEthDBSpanningTree.c deleted file mode 100644 index e12be0d884..0000000000 --- a/drivers/net/npe/IxEthDBSpanningTree.c +++ /dev/null @@ -1,83 +0,0 @@ -/** - * @file IxEthDBSpanningTree.c - * - * @brief Implementation of the STP API - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - - -#include "IxEthDB_p.h" - -/** - * @brief sets the STP blocking state of a port - * - * @param portID ID of the port - * @param blocked true to block the port or false to unblock it - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBSpanningTreeBlockingStateSet(IxEthDBPortId portID, BOOL blocked) -{ - IxNpeMhMessage message; - IX_STATUS result; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_SPANNING_TREE_PROTOCOL); - - ixEthDBPortInfo[portID].stpBlocked = blocked; - - FILL_SETBLOCKINGSTATE_MSG(message, portID, blocked); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief retrieves the STP blocking state of a port - * - * @param portID ID of the port - * @param blocked address to write the blocked status into - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBSpanningTreeBlockingStateGet(IxEthDBPortId portID, BOOL *blocked) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_SPANNING_TREE_PROTOCOL); - - IX_ETH_DB_CHECK_REFERENCE(blocked); - - *blocked = ixEthDBPortInfo[portID].stpBlocked; - - return IX_ETH_DB_SUCCESS; -} diff --git a/drivers/net/npe/IxEthDBUtil.c b/drivers/net/npe/IxEthDBUtil.c deleted file mode 100644 index 40d4470bef..0000000000 --- a/drivers/net/npe/IxEthDBUtil.c +++ /dev/null @@ -1,96 +0,0 @@ -/** - * @file ethUtil.c - * - * @brief Utility functions - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - - -#include "IxFeatureCtrl.h" -#include "IxEthDB_p.h" - -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBSingleEthNpeCheck(IxEthDBPortId portID) -{ - /* If not IXP42X A0 stepping, proceed to check for existence of coprocessors */ - if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != - (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) - || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) - { - if ((portID == 0) && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) == - IX_FEATURE_CTRL_COMPONENT_DISABLED)) - { - return IX_ETH_DB_FAIL; - } - - if ((portID == 1) && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) == - IX_FEATURE_CTRL_COMPONENT_DISABLED)) - { - return IX_ETH_DB_FAIL; - } - - if ((portID == 2) && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA_ETH) == - IX_FEATURE_CTRL_COMPONENT_DISABLED)) - { - return IX_ETH_DB_FAIL; - } - } - - return IX_ETH_DB_SUCCESS; -} - -IX_ETH_DB_PUBLIC -BOOL ixEthDBCheckSingleBitValue(UINT32 value) -{ -#if (CPU != SIMSPARCSOLARIS) && !defined (__wince) - UINT32 shift; - - /* use the count-leading-zeros XScale instruction */ - __asm__ ("clz %0, %1\n" : "=r" (shift) : "r" (value)); - - return ((value << shift) == 0x80000000UL); - -#else - - while (value != 0) - { - if (value == 1) return true; - else if ((value & 1) == 1) return false; - - value >>= 1; - } - - return false; - -#endif -} - -const char *mac2string(const unsigned char *mac) -{ - static char str[19]; - - if (mac == NULL) - { - return NULL; - } - - sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); - - return str; -} diff --git a/drivers/net/npe/IxEthDBVlan.c b/drivers/net/npe/IxEthDBVlan.c deleted file mode 100644 index 483e348934..0000000000 --- a/drivers/net/npe/IxEthDBVlan.c +++ /dev/null @@ -1,1155 +0,0 @@ -/** - * @file IxEthDBVlan.c - * - * @brief Implementation of the VLAN API - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxEthDB.h" -#include "IxEthDB_p.h" - -/* forward prototypes */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBUpdateTrafficClass(IxEthDBPortId portID, UINT32 classIndex); -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBVlanTableGet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet); - -/* contants used by various functions as "action" parameter */ -#define ADD_VLAN (0x1) -#define REMOVE_VLAN (0x2) - -/** - * @brief adds or removes a VLAN from a VLAN set - * - * @param vlanID VLAN ID to add or remove - * @param table VLAN set to add into or remove from - * @param action ADD_VLAN or REMOVE_VLAN - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBLocalVlanMembershipChange(UINT32 vlanID, IxEthDBVlanSet table, UINT32 action) -{ - UINT32 setOffset; - - /* add/remove VID to membership table */ - setOffset = VLAN_SET_OFFSET(vlanID); /* we need 9 bits to index the 512 byte membership array */ - - if (action == ADD_VLAN) - { - table[setOffset] |= 1 << VLAN_SET_MASK(vlanID); - } - else if (action == REMOVE_VLAN) - { - table[setOffset] &= ~(1 << VLAN_SET_MASK(vlanID)); - } -} - -/** - * @brief updates a set of 8 VLANs in an NPE - * - * @param portID ID of the port - * @param setOffset offset of the 8 VLANs - * - * This function updates the VLAN membership table - * and Transmit Tagging Info table for 8 consecutive - * VLAN IDs indexed by setOffset. - * - * For example, a setOffset of 0 indexes VLAN IDs 0 - * through 7, 1 indexes VLAN IDs 8 through 9 etc. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBVlanTableEntryUpdate(IxEthDBPortId portID, UINT32 setOffset) -{ - PortInfo *portInfo = &ixEthDBPortInfo[portID]; - IxNpeMhMessage message; - IX_STATUS result; - - FILL_SETPORTVLANTABLEENTRY_MSG(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), - 2 * setOffset, - portInfo->vlanMembership[setOffset], - portInfo->transmitTaggingInfo[setOffset]); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief updates a VLAN range in an NPE - * - * @param portID ID of the port - * - * This function is similar to @ref ixEthDBVlanTableEntryUpdate - * except that it can update more than one VLAN set (up to - * the entire VLAN membership and TTI tables if the offset is 0 - * and length is sizeof (IxEthDBVlanSet) (512 bytes). - * - * Updating the NPE via this method is slower as it requires - * a memory copy from SDRAM, hence it is recommended that the - * ixEthDBVlanTableEntryUpdate function is used where possible. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBVlanTableRangeUpdate(IxEthDBPortId portID) -{ - PortInfo *portInfo = &ixEthDBPortInfo[portID]; - UINT8 *vlanUpdateZone = (UINT8 *) portInfo->updateMethod.vlanUpdateZone; - IxNpeMhMessage message; - UINT32 setIndex; - IX_STATUS result; - - /* copy membership info and transmit tagging into into exchange area */ - for (setIndex = 0 ; setIndex < sizeof (portInfo->vlanMembership) ; setIndex++) - { - /* membership and TTI data are interleaved */ - vlanUpdateZone[setIndex * 2] = portInfo->vlanMembership[setIndex]; - vlanUpdateZone[setIndex * 2 + 1] = portInfo->transmitTaggingInfo[setIndex]; - } - - IX_OSAL_CACHE_FLUSH(vlanUpdateZone, FULL_VLAN_BYTE_SIZE); - - /* build NPE message */ - FILL_SETPORTVLANTABLERANGE_MSG(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), 0, 0, - IX_OSAL_MMU_VIRT_TO_PHYS(vlanUpdateZone)); - - /* send message */ - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief adds or removes a VLAN from a port's VLAN membership table - * or Transmit Tagging Information table - * - * @param portID ID of the port - * @param vlanID VLAN ID to add or remove - * @param table to add or remove from - * @param action ADD_VLAN or REMOVE_VLAN - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBPortVlanMembershipChange(IxEthDBPortId portID, IxEthDBVlanId vlanID, IxEthDBVlanSet table, UINT32 action) -{ - /* change VLAN in local membership table */ - ixEthDBLocalVlanMembershipChange(vlanID, table, action); - - /* send updated entry to NPE */ - return ixEthDBVlanTableEntryUpdate(portID, VLAN_SET_OFFSET(vlanID)); -} - -/** - * @brief sets the default port VLAN tag (the lower 3 bytes are the PVID) - * - * @param portID ID of the port - * @param vlanTag port VLAN tag (802.1Q tag) - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanTagSet(IxEthDBPortId portID, IxEthDBVlanTag vlanTag) -{ - IxNpeMhMessage message; - IX_STATUS result; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_VLAN_TAG(vlanTag); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - /* add VLAN ID to local membership table */ - ixEthDBPortVlanMembershipChange(portID, - vlanTag & IX_ETH_DB_802_1Q_VLAN_MASK, - ixEthDBPortInfo[portID].vlanMembership, - ADD_VLAN); - - /* set tag in portInfo */ - ixEthDBPortInfo[portID].vlanTag = vlanTag; - - /* build VLAN_SetDefaultRxVID message */ - FILL_SETDEFAULTRXVID_MSG(message, - IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), - IX_IEEE802_1Q_VLAN_TPID, - vlanTag); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief retrieves the default port VLAN tag (the lower 3 bytes are the PVID) - * - * @param portID ID of the port - * @param vlanTag address to write the port VLAN tag (802.1Q tag) into - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanTagGet(IxEthDBPortId portID, IxEthDBVlanTag *vlanTag) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(vlanTag); - - *vlanTag = ixEthDBPortInfo[portID].vlanTag; - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief sets the VLAN tag (the lower 3 bytes are the PVID) of a - * database filtering record - * - * @param portID ID of the port - * @param vlanTag VLAN tag (802.1Q tag) - * - * Important: filtering records are automatically converted to - * IX_ETH_DB_FILTERING_VLAN record when added a VLAN tag. - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBVlanTagSet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag vlanTag) -{ - HashNode *searchResult; - MacDescriptor *descriptor; - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - IX_ETH_DB_CHECK_VLAN_TAG(vlanTag); - - searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS); - - if (searchResult == NULL) - { - return IX_ETH_DB_NO_SUCH_ADDR; - } - - descriptor = (MacDescriptor *) searchResult->data; - - /* set record type to VLAN if not already set */ - descriptor->type = IX_ETH_DB_FILTERING_VLAN_RECORD; - - /* add vlan tag */ - descriptor->recordData.filteringVlanData.ieee802_1qTag = vlanTag; - - /* transaction completed */ - ixEthDBReleaseHashNode(searchResult); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief retrieves the VLAN tag (the lower 3 bytes are the PVID) from a - * database VLAN filtering record - * - * @param portID ID of the port - * @param vlanTag address to write the VLAN tag (802.1Q tag) into - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBVlanTagGet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag *vlanTag) -{ - HashNode *searchResult; - MacDescriptor *descriptor; - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - IX_ETH_DB_CHECK_REFERENCE(vlanTag); - - searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_FILTERING_VLAN_RECORD); - - if (searchResult == NULL) - { - return IX_ETH_DB_NO_SUCH_ADDR; - } - - descriptor = (MacDescriptor *) searchResult->data; - - /* get vlan tag */ - *vlanTag = descriptor->recordData.filteringVlanData.ieee802_1qTag; - - /* transaction completed */ - ixEthDBReleaseHashNode(searchResult); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief adds a VLAN to a port's VLAN membership table - * - * @param portID ID of the port - * @param vlanID VLAN ID to add - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipAdd(IxEthDBPortId portID, IxEthDBVlanId vlanID) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_VLAN_ID(vlanID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - return ixEthDBPortVlanMembershipChange(portID, vlanID, ixEthDBPortInfo[portID].vlanMembership, ADD_VLAN); -} - -/** - * @brief removes a VLAN from a port's VLAN membership table - * - * @param portID ID of the port - * @param vlanID VLAN ID to remove - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipRemove(IxEthDBPortId portID, IxEthDBVlanId vlanID) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_VLAN_ID(vlanID); - - /* for safety isolate only the VLAN ID in the tag (the lower 12 bits) */ - vlanID = vlanID & IX_ETH_DB_802_1Q_VLAN_MASK; - - /* check we're not asked to remove the default port VID */ - if (vlanID == IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag)) - { - return IX_ETH_DB_NO_PERMISSION; - } - - return ixEthDBPortVlanMembershipChange(portID, vlanID, ixEthDBPortInfo[portID].vlanMembership, REMOVE_VLAN); -} - -/** - * @brief adds or removes a VLAN range from a port's - * VLAN membership table or TTI table - * - * @param portID ID of the port - * @param vlanIDMin start of the VLAN range - * @param vlanIDMax end of the VLAN range - * @param table VLAN set to add or remove from - * @param action ADD_VLAN or REMOVE_VLAN - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBPortVlanMembershipRangeChange(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, IxEthDBVlanSet table, UINT32 action) -{ - UINT32 setOffsetMin, setOffsetMax; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_VLAN_ID(vlanIDMin); - - IX_ETH_DB_CHECK_VLAN_ID(vlanIDMax); - - /* for safety isolate only the VLAN ID in the tags (the lower 12 bits) */ - vlanIDMin = vlanIDMin & IX_ETH_DB_802_1Q_VLAN_MASK; - vlanIDMax = vlanIDMax & IX_ETH_DB_802_1Q_VLAN_MASK; - - /* is this a range? */ - if (vlanIDMax < vlanIDMin) - { - return IX_ETH_DB_INVALID_VLAN; - } - - /* check that we're not specifically asked to remove the default port VID */ - if (action == REMOVE_VLAN && vlanIDMax == vlanIDMin && IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag) == vlanIDMin) - { - return IX_ETH_DB_NO_PERMISSION; - } - - /* compute set offsets */ - setOffsetMin = VLAN_SET_OFFSET(vlanIDMin); - setOffsetMax = VLAN_SET_OFFSET(vlanIDMax); - - /* change VLAN range */ - for (; vlanIDMin <= vlanIDMax ; vlanIDMin++) - { - /* change vlan in local membership table */ - ixEthDBLocalVlanMembershipChange(vlanIDMin, table, action); - } - - /* if the range is within one set (max 8 VLANs in one table byte) we can just update that entry in the NPE */ - if (setOffsetMin == setOffsetMax) - { - /* send updated entry to NPE */ - return ixEthDBVlanTableEntryUpdate(portID, setOffsetMin); - } - else - { - /* update a zone of the membership/transmit tag info table */ - return ixEthDBVlanTableRangeUpdate(portID); - } -} - -/** - * @brief adds a VLAN range to a port's VLAN membership table - * - * @param portID ID of the port - * @param vlanIDMin start of the VLAN range - * @param vlanIDMax end of the VLAN range - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipRangeAdd(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - return ixEthDBPortVlanMembershipRangeChange(portID, vlanIDMin, vlanIDMax, ixEthDBPortInfo[portID].vlanMembership, ADD_VLAN); -} - -/** - * @brief removes a VLAN range from a port's VLAN membership table - * - * @param portID ID of the port - * @param vlanIDMin start of the VLAN range - * @param vlanIDMax end of the VLAN range - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipRangeRemove(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - return ixEthDBPortVlanMembershipRangeChange(portID, vlanIDMin, vlanIDMax, ixEthDBPortInfo[portID].vlanMembership, REMOVE_VLAN); -} - -/** - * @brief sets a port's VLAN membership table or TTI table and - * updates the NPE VLAN configuration - * - * @param portID ID of the port - * @param portVlanTable port VLAN table to set - * @param vlanSet new set contents - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanTableSet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(vlanSet); - - memcpy(portVlanTable, vlanSet, sizeof (IxEthDBVlanSet)); - - return ixEthDBVlanTableRangeUpdate(portID); -} - -/** - * @brief retireves a port's VLAN membership table or TTI table - * - * @param portID ID of the port - * @param portVlanTable port VLAN table to retrieve - * @param vlanSet address to - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBVlanTableGet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(vlanSet); - - memcpy(vlanSet, portVlanTable, sizeof (IxEthDBVlanSet)); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief sets a port's VLAN membership table - * - * @param portID ID of the port - * @param vlanSet new VLAN membership table - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) -{ - IxEthDBVlanId vlanID; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(vlanSet); - - /* set the bit corresponding to the PVID just in case */ - vlanID = IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag); - vlanSet[VLAN_SET_OFFSET(vlanID)] |= 1 << VLAN_SET_MASK(vlanID); - - return ixEthDBPortVlanTableSet(portID, ixEthDBPortInfo[portID].vlanMembership, vlanSet); -} - -/** - * @brief retrieves a port's VLAN membership table - * - * @param portID ID of the port - * @param vlanSet location to store the port's VLAN membership table - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - return ixEthDBVlanTableGet(portID, ixEthDBPortInfo[portID].vlanMembership, vlanSet); -} - -/** - * @brief enables or disables Egress tagging for one VLAN ID - * - * @param portID ID of the port - * @param vlanID VLAN ID to enable or disable Egress tagging on - * @param enabled true to enable and false to disable tagging - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL enabled) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_VLAN_ID(vlanID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - return ixEthDBPortVlanMembershipChange(portID, vlanID, ixEthDBPortInfo[portID].transmitTaggingInfo, enabled? ADD_VLAN : REMOVE_VLAN); -} - -/** - * @brief retrieves the Egress tagging status for one VLAN ID - * - * @param portID ID of the port - * @param vlanID VLAN ID to retrieve the tagging status for - * @param enabled location to store the tagging status - * (true - tagging enabled, false - tagging disabled) - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL *enabled) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(enabled); - - IX_ETH_DB_CHECK_VLAN_ID(vlanID); - - *enabled = ((ixEthDBPortInfo[portID].transmitTaggingInfo[VLAN_SET_OFFSET(vlanID)] & (1 << VLAN_SET_MASK(vlanID))) != 0); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief enables or disables Egress VLAN tagging for a VLAN range - * - * @param portID ID of the port - * @param vlanIDMin start of VLAN range - * @param vlanIDMax end of VLAN range - * @param enabled true to enable or false to disable VLAN tagging - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanRangeTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, BOOL enabled) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - return ixEthDBPortVlanMembershipRangeChange(portID, vlanIDMin, vlanIDMax, ixEthDBPortInfo[portID].transmitTaggingInfo, enabled? ADD_VLAN : REMOVE_VLAN); -} - -/** - * @brief sets the Egress VLAN tagging table (the Transmit Tagging - * Information table) - * - * @param portID ID of the port - * @param vlanSet new TTI table - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) -{ - IxEthDBVlanId vlanID; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(vlanSet); - - /* set the PVID bit just in case */ - vlanID = IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag); - vlanSet[VLAN_SET_OFFSET(vlanID)] |= 1 << VLAN_SET_MASK(vlanID); - - return ixEthDBPortVlanTableSet(portID, ixEthDBPortInfo[portID].transmitTaggingInfo, vlanSet); -} - -/** - * @brief retrieves the Egress VLAN tagging table (the Transmit - * Tagging Information table) - * - * @param portID ID of the port - * @param vlanSet location to store the port's TTI table - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - return ixEthDBVlanTableGet(portID, ixEthDBPortInfo[portID].transmitTaggingInfo, vlanSet); -} - -/** - * @brief sends the NPE the updated frame filter and default - * Ingress tagging - * - * @param portID ID of the port - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBIngressVlanModeUpdate(IxEthDBPortId portID) -{ - PortInfo *portInfo = &ixEthDBPortInfo[portID]; - IxNpeMhMessage message; - IX_STATUS result; - - FILL_SETRXTAGMODE_MSG(message, portID, portInfo->npeFrameFilter, portInfo->npeTaggingAction); - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief sets the default Ingress tagging behavior - * - * @param portID ID of the port - * @param taggingAction default tagging behavior - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBIngressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBTaggingAction taggingAction) -{ - PortInfo *portInfo; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - portInfo = &ixEthDBPortInfo[portID]; - - if (taggingAction == IX_ETH_DB_PASS_THROUGH) - { - portInfo->npeTaggingAction = 0x00; - } - else if (taggingAction == IX_ETH_DB_ADD_TAG) - { - portInfo->npeTaggingAction = 0x02; - } - else if (taggingAction == IX_ETH_DB_REMOVE_TAG) - { - portInfo->npeTaggingAction = 0x01; - } - else - { - return IX_ETH_DB_INVALID_ARG; - } - - portInfo->taggingAction = taggingAction; - - return ixEthDBIngressVlanModeUpdate(portID); -} - -/** - * @brief retrieves the default Ingress tagging behavior of a port - * - * @param portID ID of the port - * @param taggingAction location to save the default tagging behavior - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBTaggingAction *taggingAction) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(taggingAction); - - *taggingAction = ixEthDBPortInfo[portID].taggingAction; - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief sets the Ingress acceptable frame type filter - * - * @param portID ID of the port - * @param frameFilter acceptable frame type filter - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBAcceptableFrameTypeSet(IxEthDBPortId portID, IxEthDBFrameFilter frameFilter) -{ - PortInfo *portInfo; - IxEthDBStatus result = IX_ETH_DB_SUCCESS; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - /* check parameter range - the ORed value of the valid values is 0x7 - a value having extra bits is invalid */ - if ((frameFilter | 0x7) != 0x7 || frameFilter == 0) - { - return IX_ETH_DB_INVALID_ARG; - } - - portInfo = &ixEthDBPortInfo[portID]; - - portInfo->frameFilter = frameFilter; - portInfo->npeFrameFilter = 0; /* allow all by default */ - - /* if accepting priority tagged but not all VLAN tagged - set the membership table to contain only VLAN ID 0 - hence remove vlans 1-4094 and add VLAN ID 0 */ - if (((frameFilter & IX_ETH_DB_PRIORITY_TAGGED_FRAMES) != 0) - && ((frameFilter & IX_ETH_DB_VLAN_TAGGED_FRAMES) == 0)) - { - result = ixEthDBPortVlanMembershipRangeChange(portID, - 1, IX_ETH_DB_802_1Q_MAX_VLAN_ID, portInfo->vlanMembership, REMOVE_VLAN); - - if (result == IX_ETH_DB_SUCCESS) - { - ixEthDBLocalVlanMembershipChange(0, portInfo->vlanMembership, ADD_VLAN); - result = ixEthDBVlanTableRangeUpdate(portID); - } - } - - /* untagged only? */ - if (frameFilter == IX_ETH_DB_UNTAGGED_FRAMES) - { - portInfo->npeFrameFilter = 0x01; - } - - /* tagged only? */ - if ((frameFilter & IX_ETH_DB_UNTAGGED_FRAMES) == 0) - { - portInfo->npeFrameFilter = 0x02; - } - - if (result == IX_ETH_DB_SUCCESS) - { - result = ixEthDBIngressVlanModeUpdate(portID); - } - - return result; -} - -/** - * @brief retrieves the acceptable frame type filter for a port - * - * @param portID ID of the port - * @param frameFilter location to store the frame filter - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBAcceptableFrameTypeGet(IxEthDBPortId portID, IxEthDBFrameFilter *frameFilter) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(frameFilter); - - *frameFilter = ixEthDBPortInfo[portID].frameFilter; - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief sends an NPE the updated configuration related - * to one QoS priority (associated traffic class and AQM mapping) - * - * @param portID ID of the port - * @param classIndex QoS priority (traffic class index) - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBUpdateTrafficClass(IxEthDBPortId portID, UINT32 classIndex) -{ - IxNpeMhMessage message; - IX_STATUS result; - - UINT32 trafficClass = ixEthDBPortInfo[portID].priorityTable[classIndex]; - UINT32 aqmQueue = ixEthDBPortInfo[portID].ixEthDBTrafficClassAQMAssignments[trafficClass]; - - FILL_SETRXQOSENTRY(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), classIndex, trafficClass, aqmQueue); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief sets the priority mapping table - * - * @param portID ID of the port - * @param priorityTable new priority mapping table - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPriorityMappingTableSet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable) -{ - UINT32 classIndex; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(priorityTable); - - for (classIndex = 0 ; classIndex < IX_IEEE802_1Q_QOS_PRIORITY_COUNT ; classIndex++) - { - /* check range */ - if (priorityTable[classIndex] >= ixEthDBPortInfo[portID].ixEthDBTrafficClassCount) - { - return IX_ETH_DB_INVALID_PRIORITY; - } - } - - /* set new traffic classes */ - for (classIndex = 0 ; classIndex < IX_IEEE802_1Q_QOS_PRIORITY_COUNT ; classIndex++) - { - ixEthDBPortInfo[portID].priorityTable[classIndex] = priorityTable[classIndex]; - - if (ixEthDBUpdateTrafficClass(portID, classIndex) != IX_ETH_DB_SUCCESS) - { - return IX_ETH_DB_FAIL; - } - } - - return IX_ETH_DB_SUCCESS; - } - -/** - * @brief retrieves a port's priority mapping table - * - * @param portID ID of the port - * @param priorityTable location to store the priority table - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPriorityMappingTableGet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(priorityTable); - - memcpy(priorityTable, ixEthDBPortInfo[portID].priorityTable, sizeof (IxEthDBPriorityTable)); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief sets one QoS priority => traffic class mapping - * - * @param portID ID of the port - * @param userPriority QoS (user) priority - * @param trafficClass associated traffic class - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPriorityMappingClassSet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority trafficClass) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - /* check ranges for userPriority and trafficClass */ - if (userPriority >= IX_IEEE802_1Q_QOS_PRIORITY_COUNT || trafficClass >= ixEthDBPortInfo[portID].ixEthDBTrafficClassCount) - { - return IX_ETH_DB_INVALID_PRIORITY; - } - - ixEthDBPortInfo[portID].priorityTable[userPriority] = trafficClass; - - return ixEthDBUpdateTrafficClass(portID, userPriority); -} - -/** - * @brief retrieves one QoS priority => traffic class mapping - * - * @param portID ID of the port - * @param userPriority QoS (user) priority - * @param trafficClass location to store the associated traffic class - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority *trafficClass) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(trafficClass); - - /* check userPriority range */ - if (userPriority >= IX_IEEE802_1Q_QOS_PRIORITY_COUNT) - { - return IX_ETH_DB_INVALID_PRIORITY; - } - - *trafficClass = ixEthDBPortInfo[portID].priorityTable[userPriority]; - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief enables or disables the source port extraction - * from the VLAN TPID field - * - * @param portID ID of the port - * @param enable true to enable or false to disable - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBVlanPortExtractionEnable(IxEthDBPortId portID, BOOL enable) -{ - IxNpeMhMessage message; - IX_STATUS result; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - FILL_SETPORTIDEXTRACTIONMODE(message, portID, enable); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} diff --git a/drivers/net/npe/IxEthDBWiFi.c b/drivers/net/npe/IxEthDBWiFi.c deleted file mode 100644 index 44edd47f2f..0000000000 --- a/drivers/net/npe/IxEthDBWiFi.c +++ /dev/null @@ -1,456 +0,0 @@ -/** - * @file IxEthDBAPI.c - * - * @brief Implementation of the public API - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxEthDB_p.h" - -/* forward prototypes */ -IX_ETH_DB_PUBLIC -MacTreeNode *ixEthDBGatewaySelect(MacTreeNode *stations); - -/** - * @brief sets the BBSID value for the WiFi header conversion feature - * - * @param portID ID of the port - * @param bbsid pointer to the 6-byte BBSID value - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBWiFiBBSIDSet(IxEthDBPortId portID, IxEthDBMacAddr *bbsid) -{ - IxNpeMhMessage message; - IX_STATUS result; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION); - - IX_ETH_DB_CHECK_REFERENCE(bbsid); - - memcpy(ixEthDBPortInfo[portID].bbsid, bbsid, sizeof (IxEthDBMacAddr)); - - FILL_SETBBSID_MSG(message, portID, bbsid); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief updates the Frame Control and Duration/ID WiFi header - * conversion parameters in an NPE - * - * @param portID ID of the port - * - * This function will send a message to the NPE updating the - * frame conversion parameters for 802.3 => 802.11 header conversion. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or IX_ETH_DB_FAIL otherwise - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBWiFiFrameControlDurationIDUpdate(IxEthDBPortId portID) -{ - IxNpeMhMessage message; - IX_STATUS result; - - FILL_SETFRAMECONTROLDURATIONID(message, portID, ixEthDBPortInfo[portID].frameControlDurationID); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief sets the Duration/ID WiFi frame header conversion parameter - * - * @param portID ID of the port - * @param durationID 16-bit value containing the new Duration/ID parameter - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBWiFiDurationIDSet(IxEthDBPortId portID, UINT16 durationID) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION); - - ixEthDBPortInfo[portID].frameControlDurationID = (ixEthDBPortInfo[portID].frameControlDurationID & 0xFFFF0000) | durationID; - - return ixEthDBWiFiFrameControlDurationIDUpdate(portID); -} - -/** - * @brief sets the Frame Control WiFi frame header conversion parameter - * - * @param portID ID of the port - * @param durationID 16-bit value containing the new Frame Control parameter - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBWiFiFrameControlSet(IxEthDBPortId portID, UINT16 frameControl) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION); - - ixEthDBPortInfo[portID].frameControlDurationID = (ixEthDBPortInfo[portID].frameControlDurationID & 0xFFFF) | (frameControl << 16); - - return ixEthDBWiFiFrameControlDurationIDUpdate(portID); -} - -/** - * @brief removes a WiFi header conversion record - * - * @param portID ID of the port - * @param macAddr MAC address of the record to remove - * - * Note that this function is documented in the main - * component header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBWiFiEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) -{ - MacDescriptor recordTemplate; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION); - - memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr)); - - recordTemplate.type = IX_ETH_DB_WIFI_RECORD; - recordTemplate.portID = portID; - - return ixEthDBRemove(&recordTemplate, NULL); -} - -/** - * @brief adds a WiFi header conversion record - * - * @param portID ID of the port - * @param macAddr MAC address of the record to add - * @param gatewayMacAddr address of the gateway (or - * NULL if this is a station record) - * - * This function adds a record of type AP_TO_AP (gateway is not NULL) - * or AP_TO_STA (gateway is NULL) in the main database as a - * WiFi header conversion record. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBWiFiEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr) -{ - MacDescriptor recordTemplate; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION); - - memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr)); - - recordTemplate.type = IX_ETH_DB_WIFI_RECORD; - recordTemplate.portID = portID; - - if (gatewayMacAddr != NULL) - { - memcpy(recordTemplate.recordData.wifiData.gwMacAddress, gatewayMacAddr, sizeof (IxEthDBMacAddr)); - - recordTemplate.recordData.wifiData.type = IX_ETH_DB_WIFI_AP_TO_AP; - } - else - { - memset(recordTemplate.recordData.wifiData.gwMacAddress, 0, sizeof (IxEthDBMacAddr)); - - recordTemplate.recordData.wifiData.type = IX_ETH_DB_WIFI_AP_TO_STA; - } - - return ixEthDBAdd(&recordTemplate, NULL); -} - -/** - * @brief adds a WiFi header conversion record - * - * @param portID ID of the port - * @param macAddr MAC address of the record to add - * @param gatewayMacAddr address of the gateway - * - * This function adds a record of type AP_TO_AP - * in the main database as a WiFi header conversion record. - * - * This is simply a wrapper over @ref ixEthDBWiFiEntryAdd(). - * - * Note that this function is documented in the main - * component header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBWiFiAccessPointEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr) -{ - IX_ETH_DB_CHECK_REFERENCE(gatewayMacAddr); - - return ixEthDBWiFiEntryAdd(portID, macAddr, gatewayMacAddr); -} - -/** - * @brief adds a WiFi header conversion record - * - * @param portID ID of the port - * @param macAddr MAC address of the record to add - * - * This function adds a record of type AP_TO_STA - * in the main database as a WiFi header conversion record. - * - * This is simply a wrapper over @ref ixEthDBWiFiEntryAdd(). - * - * Note that this function is documented in the main - * component header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBWiFiStationEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) -{ - return ixEthDBWiFiEntryAdd(portID, macAddr, NULL); -} - -/** - * @brief selects a set of gateways from a tree of - * WiFi header conversion records - * - * @param stations binary tree containing pointers to WiFi header - * conversion records - * - * This function browses through the input binary tree, identifies - * records of type AP_TO_AP, clones these records and appends them - * to a vine (a single right-branch binary tree) which is returned - * as result. A maximum of MAX_GW_SIZE entries containing gateways - * will be cloned from the original tree. - * - * @return vine (linear binary tree) containing record - * clones of AP_TO_AP type, which have a gateway field - * - * @internal - */ -IX_ETH_DB_PUBLIC -MacTreeNode *ixEthDBGatewaySelect(MacTreeNode *stations) -{ - MacTreeNodeStack *stack; - MacTreeNode *gateways, *insertionPlace; - UINT32 gwIndex = 1; /* skip the empty root */ - - if (stations == NULL) - { - return NULL; - } - - stack = ixOsalCacheDmaMalloc(sizeof (MacTreeNodeStack)); - - if (stack == NULL) - { - ERROR_LOG("DB: (WiFi) failed to allocate the node stack for gateway tree linearization, out of memory?\n"); - return NULL; - } - - /* initialize root node */ - gateways = insertionPlace = NULL; - - /* start browsing the station tree */ - NODE_STACK_INIT(stack); - - /* initialize stack by pushing the tree root at offset 0 */ - NODE_STACK_PUSH(stack, stations, 0); - - while (NODE_STACK_NONEMPTY(stack)) - { - MacTreeNode *node; - UINT32 offset; - - NODE_STACK_POP(stack, node, offset); - - /* we can store maximum 31 (32 total, 1 empty root) entries in the gateway tree */ - if (offset > (MAX_GW_SIZE - 1)) break; - - /* check if this record has a gateway address */ - if (node->descriptor != NULL && node->descriptor->recordData.wifiData.type == IX_ETH_DB_WIFI_AP_TO_AP) - { - /* found a record, create an insertion place */ - if (insertionPlace != NULL) - { - insertionPlace->right = ixEthDBAllocMacTreeNode(); - insertionPlace = insertionPlace->right; - } - else - { - gateways = ixEthDBAllocMacTreeNode(); - insertionPlace = gateways; - } - - if (insertionPlace == NULL) - { - /* no nodes left, bail out with what we have */ - ixOsalCacheDmaFree(stack); - return gateways; - } - - /* clone the original record for the gateway tree */ - insertionPlace->descriptor = ixEthDBCloneMacDescriptor(node->descriptor); - - /* insert and update the offset in the original record */ - node->descriptor->recordData.wifiData.gwAddressIndex = gwIndex++; - } - - /* browse the tree */ - if (node->left != NULL) - { - NODE_STACK_PUSH(stack, node->left, LEFT_CHILD_OFFSET(offset)); - } - - if (node->right != NULL) - { - NODE_STACK_PUSH(stack, node->right, RIGHT_CHILD_OFFSET(offset)); - } - } - - ixOsalCacheDmaFree(stack); - return gateways; -} - -/** - * @brief downloads the WiFi header conversion table to an NPE - * - * @param portID ID of the port - * - * This function prepares the WiFi header conversion tables and - * downloads them to the specified NPE port. - * - * The header conversion tables consist in the main table of - * addresses and the secondary table of gateways. AP_TO_AP records - * from the first table contain index fields into the second table - * for gateway selection. - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBWiFiConversionTableDownload(IxEthDBPortId portID) -{ - IxEthDBPortMap query; - MacTreeNode *stations = NULL, *gateways = NULL, *gateway = NULL; - IxNpeMhMessage message; - PortInfo *portInfo; - IX_STATUS result; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION); - - portInfo = &ixEthDBPortInfo[portID]; - - SET_DEPENDENCY_MAP(query, portID); - - ixEthDBUpdateLock(); - - stations = ixEthDBQuery(NULL, query, IX_ETH_DB_WIFI_RECORD, MAX_ELT_SIZE); - gateways = ixEthDBGatewaySelect(stations); - - /* clean up gw area */ - memset((void *) portInfo->updateMethod.npeGwUpdateZone, FULL_GW_BYTE_SIZE, 0); - - /* write all gateways */ - gateway = gateways; - - while (gateway != NULL) - { - ixEthDBNPEGatewayNodeWrite((void *) (((UINT32) portInfo->updateMethod.npeGwUpdateZone) - + gateway->descriptor->recordData.wifiData.gwAddressIndex * ELT_ENTRY_SIZE), - gateway); - - gateway = gateway->right; - } - - /* free the gateway tree */ - if (gateways != NULL) - { - ixEthDBFreeMacTreeNode(gateways); - } - - FILL_SETAPMACTABLE_MSG(message, - IX_OSAL_MMU_VIRT_TO_PHYS(portInfo->updateMethod.npeGwUpdateZone)); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - if (result == IX_SUCCESS) - { - /* update the main tree (the stations tree) */ - portInfo->updateMethod.searchTree = stations; - - result = ixEthDBNPEUpdateHandler(portID, IX_ETH_DB_WIFI_RECORD); - } - - ixEthDBUpdateUnlock(); - - return result; -} diff --git a/drivers/net/npe/IxEthMii.c b/drivers/net/npe/IxEthMii.c deleted file mode 100644 index 27f3548ce0..0000000000 --- a/drivers/net/npe/IxEthMii.c +++ /dev/null @@ -1,473 +0,0 @@ -/** - * @file IxEthMii.c - * - * @author Intel Corporation - * @date - * - * @brief MII control functions - * - * Design Notes: - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxOsal.h" - -#include "IxEthAcc.h" -#include "IxEthMii_p.h" - -#ifdef __wince -#include "IxOsPrintf.h" -#endif - -/* Array to store the phy IDs of the discovered phys */ -PRIVATE UINT32 ixEthMiiPhyId[IXP425_ETH_ACC_MII_MAX_ADDR]; - -/********************************************************* - * - * Scan for PHYs on the MII bus. This function returns - * an array of booleans, one for each PHY address. - * If a PHY is found at a particular address, the - * corresponding entry in the array is set to true. - * - */ - -PUBLIC IX_STATUS -ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount) -{ - UINT32 i; - UINT16 regval, regvalId1, regvalId2; - - /*Search for PHYs on the MII*/ - /*Search for existant phys on the MDIO bus*/ - - if ((phyPresent == NULL) || - (maxPhyCount > IXP425_ETH_ACC_MII_MAX_ADDR)) - { - return IX_FAIL; - } - - /* fill the array */ - for(i=0; - i 0 && i= IX_ETH_MII_RESET_DELAY_MS) - { - ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG, - IX_ETH_MII_CR_NORM_EN); - return IX_FAIL; - } - - return IX_SUCCESS; - } /* end of if(ixEthMiiPhyId) */ - else if (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_KS8995_PHY_ID) - { - /* reset bit is reserved, just reset the control register */ - ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG, - IX_ETH_MII_CR_NORM_EN); - return IX_SUCCESS; - } - else - { - /* unknown PHY, set the control register reset bit, - * wait 2 s. and clear the control register. - */ - ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG, - IX_ETH_MII_CR_RESET); - - ixOsalSleep (IX_ETH_MII_RESET_DELAY_MS); - - ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG, - IX_ETH_MII_CR_NORM_EN); - return IX_SUCCESS; - } /* end of if-else(ixEthMiiPhyId) */ - } /* end of if(phyAddr) */ - return IX_FAIL; -} - -/***************************************************************** - * - * Link state query functions - */ - -PUBLIC IX_STATUS -ixEthMiiLinkStatus(UINT32 phyAddr, - BOOL *linkUp, - BOOL *speed100, - BOOL *fullDuplex, - BOOL *autoneg) -{ - UINT16 ctrlRegval, statRegval, regval, regval4, regval5; - - /* check the parameters */ - if ((linkUp == NULL) || - (speed100 == NULL) || - (fullDuplex == NULL) || - (autoneg == NULL)) - { - return IX_FAIL; - } - - *linkUp = false; - *speed100 = false; - *fullDuplex = false; - *autoneg = false; - - if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) && - (ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID)) - { - if ((ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT971_PHY_ID) || - (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT972_PHY_ID) || - (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT9785_PHY_ID) - ) - { - /* --------------------------------------------------*/ - /* Retrieve information from PHY specific register */ - /* --------------------------------------------------*/ - if (ixEthAccMiiReadRtn(phyAddr, - IX_ETH_MII_STAT2_REG, - ®val) != IX_ETH_ACC_SUCCESS) - { - return IX_FAIL; - } - *linkUp = ((regval & IX_ETH_MII_SR2_LINK) != 0); - *speed100 = ((regval & IX_ETH_MII_SR2_100) != 0); - *fullDuplex = ((regval & IX_ETH_MII_SR2_FD) != 0); - *autoneg = ((regval & IX_ETH_MII_SR2_AUTO) != 0); - return IX_SUCCESS; - } /* end of if(ixEthMiiPhyId) */ - else - { - /* ----------------------------------------------------*/ - /* Retrieve information from status and ctrl registers */ - /* ----------------------------------------------------*/ - if (ixEthAccMiiReadRtn(phyAddr, - IX_ETH_MII_CTRL_REG, - &ctrlRegval) != IX_ETH_ACC_SUCCESS) - { - return IX_FAIL; - } - ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_STAT_REG, &statRegval); - - *linkUp = ((statRegval & IX_ETH_MII_SR_LINK_STATUS) != 0); - if (*linkUp) - { - *autoneg = ((ctrlRegval & IX_ETH_MII_CR_AUTO_EN) != 0) && - ((statRegval & IX_ETH_MII_SR_AUTO_SEL) != 0) && - ((statRegval & IX_ETH_MII_SR_AUTO_NEG) != 0); - - if (*autoneg) - { - /* mask the current stat values with the capabilities */ - ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_AN_ADS_REG, ®val4); - ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_AN_PRTN_REG, ®val5); - /* merge the flags from the 3 registers */ - regval = (statRegval & ((regval4 & regval5) << 6)); - /* initialise from status register values */ - if ((regval & IX_ETH_MII_SR_TX_FULL_DPX) != 0) - { - /* 100 Base X full dplx */ - *speed100 = true; - *fullDuplex = true; - return IX_SUCCESS; - } - if ((regval & IX_ETH_MII_SR_TX_HALF_DPX) != 0) - { - /* 100 Base X half dplx */ - *speed100 = true; - return IX_SUCCESS; - } - if ((regval & IX_ETH_MII_SR_10T_FULL_DPX) != 0) - { - /* 10 mb full dplx */ - *fullDuplex = true; - return IX_SUCCESS; - } - if ((regval & IX_ETH_MII_SR_10T_HALF_DPX) != 0) - { - /* 10 mb half dplx */ - return IX_SUCCESS; - } - } /* end of if(autoneg) */ - else - { - /* autonegotiate not complete, return setup parameters */ - *speed100 = ((ctrlRegval & IX_ETH_MII_CR_100) != 0); - *fullDuplex = ((ctrlRegval & IX_ETH_MII_CR_FDX) != 0); - } - } /* end of if(linkUp) */ - } /* end of if-else(ixEthMiiPhyId) */ - } /* end of if(phyAddr) */ - else - { - return IX_FAIL; - } /* end of if-else(phyAddr) */ - return IX_SUCCESS; -} - -/***************************************************************** - * - * Link state display functions - */ - -PUBLIC IX_STATUS -ixEthMiiPhyShow (UINT32 phyAddr) -{ - BOOL linkUp, speed100, fullDuplex, autoneg; - UINT16 cregval; - UINT16 sregval; - - - ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_STAT_REG, &sregval); - ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_CTRL_REG, &cregval); - - /* get link information */ - if (ixEthMiiLinkStatus(phyAddr, - &linkUp, - &speed100, - &fullDuplex, - &autoneg) != IX_ETH_ACC_SUCCESS) - { - printf("PHY Status unknown\n"); - return IX_FAIL; - } - - printf("PHY ID [phyAddr]: %8.8x\n",ixEthMiiPhyId[phyAddr]); - printf( " Status reg: %4.4x\n",sregval); - printf( " control reg: %4.4x\n",cregval); - /* display link information */ - printf("PHY Status:\n"); - printf(" Link is %s\n", - (linkUp ? "Up" : "Down")); - if((sregval & IX_ETH_MII_SR_REMOTE_FAULT) != 0) - { - printf(" Remote fault detected\n"); - } - printf(" Auto Negotiation %s\n", - (autoneg ? "Completed" : "Not Completed")); - - printf("PHY Configuration:\n"); - printf(" Speed %sMb/s\n", - (speed100 ? "100" : "10")); - printf(" %s Duplex\n", - (fullDuplex ? "Full" : "Half")); - printf(" Auto Negotiation %s\n", - (autoneg ? "Enabled" : "Disabled")); - return IX_SUCCESS; -} - diff --git a/drivers/net/npe/IxFeatureCtrl.c b/drivers/net/npe/IxFeatureCtrl.c deleted file mode 100644 index 0b6807d9d7..0000000000 --- a/drivers/net/npe/IxFeatureCtrl.c +++ /dev/null @@ -1,398 +0,0 @@ -/** - * @file IxFeatureCtrl.c - * - * @author Intel Corporation - * @date 29-Jan-2003 - * - * @brief Feature Control Public API Implementation - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -#include "IxOsal.h" -#include "IxVersionId.h" -#include "IxFeatureCtrl.h" - -/* Macro to read from the Feature Control Register */ -#define IX_FEATURE_CTRL_READ(result) \ -do { \ -ixFeatureCtrlExpMap(); \ -(result) = IX_OSAL_READ_LONG(ixFeatureCtrlRegister); \ -} while (0) - -/* Macro to write to the Feature Control Register */ -#define IX_FEATURE_CTRL_WRITE(value) \ -do { \ -ixFeatureCtrlExpMap(); \ -IX_OSAL_WRITE_LONG(ixFeatureCtrlRegister, (value)); \ -} while (0) - -/* - * This is the offset of the feature register relative to the base of the - * Expansion Bus Controller MMR. - */ -#define IX_FEATURE_CTRL_REG_OFFSET (0x00000028) - - -/* Boolean to mark the fact that the EXP_CONFIG address space was mapped */ -PRIVATE BOOL ixFeatureCtrlExpCfgRegionMapped = false; - -/* Pointer holding the virtual address of the Feature Control Register */ -PRIVATE VUINT32 *ixFeatureCtrlRegister = NULL; - -/* Place holder to store the software configuration */ -PRIVATE BOOL swConfiguration[IX_FEATURECTRL_SWCONFIG_MAX]; - -/* Flag to control swConfiguration[] is initialized once */ -PRIVATE BOOL swConfigurationFlag = false ; - -/* Array containing component mask values */ -#ifdef __ixp42X -UINT32 componentMask[IX_FEATURECTRL_MAX_COMPONENTS] = { - (0x1<> IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET) - & IX_FEATURE_CTRL_DEVICE_TYPE_MASK); -} /* End function ixFeatureCtrlDeviceRead */ - - -/** - * Function definition: ixFeatureCtrlSwConfigurationCheck - */ -IX_STATUS -ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType) -{ - if (swConfigType >= IX_FEATURECTRL_SWCONFIG_MAX) - { - ixOsalLog(IX_OSAL_LOG_LVL_WARNING, - IX_OSAL_LOG_DEV_STDOUT, - "FeatureCtrl: Invalid software configuraiton input.\n", - 0, 0, 0, 0, 0, 0); - - return IX_FEATURE_CTRL_SWCONFIG_DISABLED; - } - - /* The function will only initialize once. */ - ixFeatureCtrlSwConfigurationInit(); - - /* Check and return software configuration */ - return ((swConfiguration[(UINT32)swConfigType] == true) ? IX_FEATURE_CTRL_SWCONFIG_ENABLED: IX_FEATURE_CTRL_SWCONFIG_DISABLED); -} - -/** - * Function definition: ixFeatureCtrlSwConfigurationWrite - */ -void -ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled) -{ - if (swConfigType >= IX_FEATURECTRL_SWCONFIG_MAX) - { - ixOsalLog(IX_OSAL_LOG_LVL_WARNING, - IX_OSAL_LOG_DEV_STDOUT, - "FeatureCtrl: Invalid software configuraiton input.\n", - 0, 0, 0, 0, 0, 0); - - return; - } - - /* The function will only initialize once. */ - ixFeatureCtrlSwConfigurationInit(); - - /* Write software configuration */ - swConfiguration[(UINT32)swConfigType]=enabled ; -} - -/** - * Function definition: ixFeatureCtrlIxp400SwVersionShow - */ -void -ixFeatureCtrlIxp400SwVersionShow (void) -{ - printf ("\nIXP400 Software Release %s %s\n\n", IX_VERSION_ID, IX_VERSION_INTERNAL_ID); - -} - -/** - * Function definition: ixFeatureCtrlSoftwareBuildGet - */ -IxFeatureCtrlBuildDevice -ixFeatureCtrlSoftwareBuildGet (void) -{ - #ifdef __ixp42X - return IX_FEATURE_CTRL_SW_BUILD_IXP42X; - #else - return IX_FEATURE_CTRL_SW_BUILD_IXP46X; - #endif -} diff --git a/drivers/net/npe/IxNpeDl.c b/drivers/net/npe/IxNpeDl.c deleted file mode 100644 index 0e5c428323..0000000000 --- a/drivers/net/npe/IxNpeDl.c +++ /dev/null @@ -1,916 +0,0 @@ -/** - * @file IxNpeDl.c - * - * @author Intel Corporation - * @date 08 January 2002 - * - * @brief This file contains the implementation of the public API for the - * IXP425 NPE Downloader component - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/* - * Put the system defined include files required - */ - -/* - * Put the user defined include files required - */ -#include "IxNpeDl.h" -#include "IxNpeDlImageMgr_p.h" -#include "IxNpeDlNpeMgr_p.h" -#include "IxNpeDlMacros_p.h" -#include "IxFeatureCtrl.h" -#include "IxOsal.h" -/* - * #defines used in this file - */ - #define IMAGEID_MAJOR_NUMBER_DEFAULT 0 - #define IMAGEID_MINOR_NUMBER_DEFAULT 0 - -/* - * Typedefs whose scope is limited to this file. - */ -typedef struct -{ - BOOL validImage; - IxNpeDlImageId imageId; -} IxNpeDlNpeState; - -/* module statistics counters */ -typedef struct -{ - UINT32 attemptedDownloads; - UINT32 successfulDownloads; - UINT32 criticalFailDownloads; -} IxNpeDlStats; - -/* - * Variable declarations global to this file only. Externs are followed - * by static variables. - */ -static IxNpeDlNpeState ixNpeDlNpeState[IX_NPEDL_NPEID_MAX] = -{ - {false, {IX_NPEDL_NPEID_MAX, 0, 0, 0}}, - {false, {IX_NPEDL_NPEID_MAX, 0, 0, 0}}, - {false, {IX_NPEDL_NPEID_MAX, 0, 0, 0}} -}; - -static IxNpeDlStats ixNpeDlStats; - -/* - * Software guard to prevent NPE from being started multiple times. - */ -static BOOL ixNpeDlNpeStarted[IX_NPEDL_NPEID_MAX] ={false, false, false} ; - - -/* - * static function prototypes. - */ -PRIVATE IX_STATUS -ixNpeDlNpeInitAndStartInternal (UINT32 *imageLibrary, UINT32 imageId); - -/* - * Function definition: ixNpeDlImageDownload - */ -PUBLIC IX_STATUS -ixNpeDlImageDownload (IxNpeDlImageId *imageIdPtr, - BOOL verify) -{ - UINT32 imageSize; - UINT32 *imageCodePtr = NULL; - IX_STATUS status; - IxNpeDlNpeId npeId = imageIdPtr->npeId; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlImageDownload\n"); - - ixNpeDlStats.attemptedDownloads++; - - /* Check input parameters */ - if ((npeId >= IX_NPEDL_NPEID_MAX) || (npeId < 0)) - { - status = IX_NPEDL_PARAM_ERR; - IX_NPEDL_ERROR_REPORT ("ixNpeDlImageDownload - invalid parameter\n"); - } - else - { - /* Ensure initialisation has been completed */ - ixNpeDlNpeMgrInit(); - - /* If not IXP42X A0 stepping, proceed to check for existence of npe's */ - if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != - (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) - || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) - { - if (npeId == IX_NPEDL_NPEID_NPEA) - { - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA) == - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - IX_NPEDL_WARNING_REPORT("Warning: the NPE A component you specified does" - " not exist\n"); - return IX_SUCCESS; - } - } /* end of if(npeId) */ - else if (npeId == IX_NPEDL_NPEID_NPEB) - { - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)== - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - IX_NPEDL_WARNING_REPORT("Warning: the NPE B component you specified" - " does not exist\n"); - return IX_SUCCESS; - } - } /* end of elseif(npeId) */ - else if (npeId == IX_NPEDL_NPEID_NPEC) - { - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)== - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - IX_NPEDL_WARNING_REPORT("Warning: the NPE C component you specified" - " does not exist\n"); - return IX_SUCCESS; - } - } /* end of elseif(npeId) */ - } /* end of if(IX_FEATURE_CTRL_SILICON_TYPE_B0) */ /*End of Silicon Type Check*/ - - /* stop and reset the NPE */ - if (IX_SUCCESS != ixNpeDlNpeStopAndReset (npeId)) - { - IX_NPEDL_ERROR_REPORT ("Failed to stop and reset NPE\n"); - return IX_FAIL; - } - - /* Locate image */ - status = ixNpeDlImageMgrImageLocate (imageIdPtr, &imageCodePtr, - &imageSize); - if (IX_SUCCESS == status) - { - /* - * If download was successful, store image Id in list of - * currently loaded images. If a critical error occured - * during download, record that the NPE has an invalid image - */ - status = ixNpeDlNpeMgrImageLoad (npeId, imageCodePtr, - verify); - if (IX_SUCCESS == status) - { - ixNpeDlNpeState[npeId].imageId = *imageIdPtr; - ixNpeDlNpeState[npeId].validImage = true; - ixNpeDlStats.successfulDownloads++; - - status = ixNpeDlNpeExecutionStart (npeId); - } - else if ((status == IX_NPEDL_CRITICAL_NPE_ERR) || - (status == IX_NPEDL_CRITICAL_MICROCODE_ERR)) - { - ixNpeDlNpeState[npeId].imageId = *imageIdPtr; - ixNpeDlNpeState[npeId].validImage = false; - ixNpeDlStats.criticalFailDownloads++; - } - } /* end of if(IX_SUCCESS) */ /* condition: image located successfully in microcode image */ - } /* end of if-else(npeId) */ /* condition: parameter checks ok */ - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlImageDownload : status = %d\n", status); - return status; -} - -/* - * Function definition: ixNpeDlAvailableImagesCountGet - */ -PUBLIC IX_STATUS -ixNpeDlAvailableImagesCountGet (UINT32 *numImagesPtr) -{ - IX_STATUS status; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlAvailableImagesCountGet\n"); - - /* Check input parameters */ - if (numImagesPtr == NULL) - { - status = IX_NPEDL_PARAM_ERR; - IX_NPEDL_ERROR_REPORT ("ixNpeDlAvailableImagesCountGet - " - "invalid parameter\n"); - } - else - { - /* - * Use ImageMgr module to get no. of images listed in Image Library Header. - * If NULL is passed as imageListPtr parameter to following function, - * it will only fill number of images into numImagesPtr - */ - status = ixNpeDlImageMgrImageListExtract (NULL, numImagesPtr); - } /* end of if-else(numImagesPtr) */ - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlAvailableImagesCountGet : " - "status = %d\n", status); - return status; -} - -/* - * Function definition: ixNpeDlAvailableImagesListGet - */ -PUBLIC IX_STATUS -ixNpeDlAvailableImagesListGet (IxNpeDlImageId *imageIdListPtr, - UINT32 *listSizePtr) -{ - IX_STATUS status; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlAvailableImagesListGet\n"); - - /* Check input parameters */ - if ((imageIdListPtr == NULL) || (listSizePtr == NULL)) - { - status = IX_NPEDL_PARAM_ERR; - IX_NPEDL_ERROR_REPORT ("ixNpeDlAvailableImagesListGet - " - "invalid parameter\n"); - } - else - { - /* Call ImageMgr to get list of images listed in Image Library Header */ - status = ixNpeDlImageMgrImageListExtract (imageIdListPtr, - listSizePtr); - } /* end of if-else(imageIdListPtr) */ - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlAvailableImagesListGet : status = %d\n", - status); - return status; -} - -/* - * Function definition: ixNpeDlLoadedImageGet - */ -PUBLIC IX_STATUS -ixNpeDlLoadedImageGet (IxNpeDlNpeId npeId, - IxNpeDlImageId *imageIdPtr) -{ - IX_STATUS status = IX_SUCCESS; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlLoadedImageGet\n"); - - /* Check input parameters */ - if ((npeId >= IX_NPEDL_NPEID_MAX) || (npeId < 0) || (imageIdPtr == NULL)) - { - status = IX_NPEDL_PARAM_ERR; - IX_NPEDL_ERROR_REPORT ("ixNpeDlLoadedImageGet - invalid parameter\n"); - } - else - { - - /* If not IXP42X A0 stepping, proceed to check for existence of npe's */ - if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != - (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) - || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) - { - if (npeId == IX_NPEDL_NPEID_NPEA && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA) == - IX_FEATURE_CTRL_COMPONENT_DISABLED)) - { - IX_NPEDL_WARNING_REPORT("Warning: the NPE A component you specified does" - " not exist\n"); - return IX_SUCCESS; - } /* end of if(npeId) */ - - if (npeId == IX_NPEDL_NPEID_NPEB && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB) == - IX_FEATURE_CTRL_COMPONENT_DISABLED)) - { - IX_NPEDL_WARNING_REPORT("Warning: the NPE B component you specified does" - " not exist\n"); - return IX_SUCCESS; - } /* end of if(npeId) */ - - if (npeId == IX_NPEDL_NPEID_NPEC && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC) == - IX_FEATURE_CTRL_COMPONENT_DISABLED)) - { - IX_NPEDL_WARNING_REPORT("Warning: the NPE C component you specified does" - " not exist\n"); - return IX_SUCCESS; - } /* end of if(npeId) */ - } /* end of if not IXP42x-A0 silicon */ - - if (ixNpeDlNpeState[npeId].validImage) - { - /* use npeId to get imageId from list of currently loaded - images */ - *imageIdPtr = ixNpeDlNpeState[npeId].imageId; - } - else - { - status = IX_FAIL; - } /* end of if-else(ixNpeDlNpeState) */ - } /* end of if-else(npeId) */ - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlLoadedImageGet : status = %d\n", - status); - return status; -} - -/* - * Function definition: ixNpeDlLatestImageGet - */ -PUBLIC IX_STATUS -ixNpeDlLatestImageGet ( - IxNpeDlNpeId npeId, - IxNpeDlFunctionalityId functionalityId, - IxNpeDlImageId *imageIdPtr) -{ - IX_STATUS status; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlLatestImageGet\n"); - - /* Check input parameters */ - if ((npeId >= IX_NPEDL_NPEID_MAX) || - (npeId < 0) || - (imageIdPtr == NULL)) - { - status = IX_NPEDL_PARAM_ERR; - IX_NPEDL_ERROR_REPORT ("ixNpeDlLatestImageGet - " - "invalid parameter\n"); - } /* end of if(npeId) */ - else - { - - /* If not IXP42X A0 stepping, proceed to check for existence of npe's */ - if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != - (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) - || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) - { - if (npeId == IX_NPEDL_NPEID_NPEA && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA) == - IX_FEATURE_CTRL_COMPONENT_DISABLED)) - { - IX_NPEDL_WARNING_REPORT("Warning: the NPE A component you specified does" - " not exist\n"); - return IX_SUCCESS; - } /* end of if(npeId) */ - - if (npeId == IX_NPEDL_NPEID_NPEB && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB) == - IX_FEATURE_CTRL_COMPONENT_DISABLED)) - { - IX_NPEDL_WARNING_REPORT("Warning: the NPE B component you specified does" - " not exist\n"); - return IX_SUCCESS; - } /* end of if(npeId) */ - - if (npeId == IX_NPEDL_NPEID_NPEC && - (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC) == - IX_FEATURE_CTRL_COMPONENT_DISABLED)) - { - IX_NPEDL_WARNING_REPORT("Warning: the NPE C component you specified does" - " not exist\n"); - return IX_SUCCESS; - } /* end of if(npeId) */ - } /* end of if not IXP42x-A0 silicon */ - - imageIdPtr->npeId = npeId; - imageIdPtr->functionalityId = functionalityId; - imageIdPtr->major = IMAGEID_MAJOR_NUMBER_DEFAULT; - imageIdPtr->minor = IMAGEID_MINOR_NUMBER_DEFAULT; - /* Call ImageMgr to get list of images listed in Image Library Header */ - status = ixNpeDlImageMgrLatestImageExtract(imageIdPtr); - } /* end of if-else(npeId) */ - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlLatestImageGet : status = %d\n", - status); - - return status; -} - -/* - * Function definition: ixNpeDlNpeStopAndReset - */ -PUBLIC IX_STATUS -ixNpeDlNpeStopAndReset (IxNpeDlNpeId npeId) -{ - IX_STATUS status = IX_SUCCESS; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeStopAndReset\n"); - - /* Ensure initialisation has been completed */ - ixNpeDlNpeMgrInit(); - - /* If not IXP42X A0 stepping, proceed to check for existence of npe's */ - if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != - (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) - || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) - { - /* - * Check whether NPE is present - */ - if (IX_NPEDL_NPEID_NPEA == npeId) - { - /* Check whether NPE A is present */ - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA)== - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - /* NPE A does not present */ - IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeStopAndReset - Warning:NPEA does not present.\n"); - return IX_SUCCESS; - } - } /* end of if(IX_NPEDL_NPEID_NPEA) */ - else if (IX_NPEDL_NPEID_NPEB == npeId) - { - /* Check whether NPE B is present */ - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)== - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - /* NPE B does not present */ - IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeStopAndReset - Warning:NPEB does not present.\n"); - return IX_SUCCESS; - } - } /* end of elseif(IX_NPEDL_NPEID_NPEB) */ - else if (IX_NPEDL_NPEID_NPEC == npeId) - { - /* Check whether NPE C is present */ - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)== - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - /* NPE C does not present */ - IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeStopAndReset - Warning:NPEC does not present.\n"); - return IX_SUCCESS; - } - } /* end of elseif(IX_NPEDL_NPEID_NPEC) */ - else - { - /* Invalid NPE ID */ - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeStopAndReset - invalid Npe ID\n"); - status = IX_NPEDL_PARAM_ERR; - } /* end of if-else(IX_NPEDL_NPEID_NPEC) */ - } /* end of if not IXP42x-A0 Silicon */ - - if (status == IX_SUCCESS) - { - /* call NpeMgr function to stop the NPE */ - status = ixNpeDlNpeMgrNpeStop (npeId); - if (status == IX_SUCCESS) - { - /* call NpeMgr function to reset the NPE */ - status = ixNpeDlNpeMgrNpeReset (npeId); - } - } /* end of if(status) */ - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeStopAndReset : status = %d\n", status); - - if (IX_SUCCESS == status) - { - /* Indicate NPE has been stopped */ - ixNpeDlNpeStarted[npeId] = false ; - } - - return status; -} - -/* - * Function definition: ixNpeDlNpeExecutionStart - */ -PUBLIC IX_STATUS -ixNpeDlNpeExecutionStart (IxNpeDlNpeId npeId) -{ - IX_STATUS status = IX_SUCCESS; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeExecutionStart\n"); - - /* If not IXP42X A0 stepping, proceed to check for existence of npe's */ - if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != - (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) - || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) - { - /* - * Check whether NPE is present - */ - if (IX_NPEDL_NPEID_NPEA == npeId) - { - /* Check whether NPE A is present */ - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA)== - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - /* NPE A does not present */ - IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStart - Warning:NPEA does not present.\n"); - return IX_SUCCESS; - } - } /* end of if(IX_NPEDL_NPEID_NPEA) */ - else if (IX_NPEDL_NPEID_NPEB == npeId) - { - /* Check whether NPE B is present */ - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)== - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - /* NPE B does not present */ - IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStart - Warning:NPEB does not present.\n"); - return IX_SUCCESS; - } - } /* end of elseif(IX_NPEDL_NPEID_NPEB) */ - else if (IX_NPEDL_NPEID_NPEC == npeId) - { - /* Check whether NPE C is present */ - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)== - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - /* NPE C does not present */ - IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStart - Warning:NPEC does not present.\n"); - return IX_SUCCESS; - } - } /* end of elseif(IX_NPEDL_NPEID_NPEC) */ - else - { - /* Invalid NPE ID */ - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeExecutionStart - invalid Npe ID\n"); - return IX_NPEDL_PARAM_ERR; - } /* end of if-else(IX_NPEDL_NPEID_NPEC) */ - } /* end of if not IXP42x-A0 Silicon */ - - if (true == ixNpeDlNpeStarted[npeId]) - { - /* NPE has been started. */ - return IX_SUCCESS ; - } - - /* Ensure initialisation has been completed */ - ixNpeDlNpeMgrInit(); - - /* call NpeMgr function to start the NPE */ - status = ixNpeDlNpeMgrNpeStart (npeId); - - if (IX_SUCCESS == status) - { - /* Indicate NPE has started */ - ixNpeDlNpeStarted[npeId] = true ; - } - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeExecutionStart : status = %d\n", - status); - - return status; -} - -/* - * Function definition: ixNpeDlNpeExecutionStop - */ -PUBLIC IX_STATUS -ixNpeDlNpeExecutionStop (IxNpeDlNpeId npeId) -{ - IX_STATUS status = IX_SUCCESS; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeExecutionStop\n"); - - /* Ensure initialisation has been completed */ - ixNpeDlNpeMgrInit(); - - /* If not IXP42X A0 stepping, proceed to check for existence of npe's */ - if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != - (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) - || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) - { - /* - * Check whether NPE is present - */ - if (IX_NPEDL_NPEID_NPEA == npeId) - { - /* Check whether NPE A is present */ - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA)== - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - /* NPE A does not present */ - IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStop - Warning:NPEA does not present.\n"); - return IX_SUCCESS; - } - } /* end of if(IX_NPEDL_NPEID_NPEA) */ - else if (IX_NPEDL_NPEID_NPEB == npeId) - { - /* Check whether NPE B is present */ - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)== - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - /* NPE B does not present */ - IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStop - Warning:NPEB does not present.\n"); - return IX_SUCCESS; - } - } /* end of elseif(IX_NPEDL_NPEID_NPEB) */ - else if (IX_NPEDL_NPEID_NPEC == npeId) - { - /* Check whether NPE C is present */ - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)== - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - /* NPE C does not present */ - IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStop - Warning:NPEC does not present.\n"); - return IX_SUCCESS; - } - } /* end of elseif(IX_NPEDL_NPEID_NPEC) */ - else - { - /* Invalid NPE ID */ - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeExecutionStop - invalid Npe ID\n"); - status = IX_NPEDL_PARAM_ERR; - } /* end of if-else(IX_NPEDL_NPEID_NPEC) */ - } /* end of if not IXP42X-AO Silicon */ - - if (status == IX_SUCCESS) - { - /* call NpeMgr function to stop the NPE */ - status = ixNpeDlNpeMgrNpeStop (npeId); - } - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeExecutionStop : status = %d\n", - status); - - if (IX_SUCCESS == status) - { - /* Indicate NPE has been stopped */ - ixNpeDlNpeStarted[npeId] = false ; - } - - return status; -} - -/* - * Function definition: ixNpeDlUnload - */ -PUBLIC IX_STATUS -ixNpeDlUnload (void) -{ - IX_STATUS status; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlUnload\n"); - - status = ixNpeDlNpeMgrUninit(); - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlUnload : status = %d\n", - status); - return status; -} - -/* - * Function definition: ixNpeDlStatsShow - */ -PUBLIC void -ixNpeDlStatsShow (void) -{ - ixOsalLog (IX_OSAL_LOG_LVL_USER, - IX_OSAL_LOG_DEV_STDOUT, - "\nixNpeDlStatsShow:\n" - "\tDownloads Attempted by user: %u\n" - "\tSuccessful Downloads: %u\n" - "\tFailed Downloads (due to Critical Error): %u\n\n", - ixNpeDlStats.attemptedDownloads, - ixNpeDlStats.successfulDownloads, - ixNpeDlStats.criticalFailDownloads, - 0,0,0); - - ixNpeDlImageMgrStatsShow (); - ixNpeDlNpeMgrStatsShow (); -} - -/* - * Function definition: ixNpeDlStatsReset - */ -PUBLIC void -ixNpeDlStatsReset (void) -{ - ixNpeDlStats.attemptedDownloads = 0; - ixNpeDlStats.successfulDownloads = 0; - ixNpeDlStats.criticalFailDownloads = 0; - - ixNpeDlImageMgrStatsReset (); - ixNpeDlNpeMgrStatsReset (); -} - -/* - * Function definition: ixNpeDlNpeInitAndStartInternal - */ -PRIVATE IX_STATUS -ixNpeDlNpeInitAndStartInternal (UINT32 *imageLibrary, - UINT32 imageId) -{ - UINT32 imageSize; - UINT32 *imageCodePtr = NULL; - IX_STATUS status; - IxNpeDlNpeId npeId = IX_NPEDL_NPEID_FROM_IMAGEID_GET(imageId); - IxFeatureCtrlDeviceId deviceId = IX_NPEDL_DEVICEID_FROM_IMAGEID_GET(imageId); - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeInitAndStartInternal\n"); - - ixNpeDlStats.attemptedDownloads++; - - /* Check input parameter device correctness */ - if ((deviceId >= IX_FEATURE_CTRL_DEVICE_TYPE_MAX) || - (deviceId < IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X)) - { - status = IX_NPEDL_PARAM_ERR; - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeInitAndStartInternal - " - "invalid parameter\n"); - } /* End valid device id checking */ - - /* Check input parameters */ - else if ((npeId >= IX_NPEDL_NPEID_MAX) || (npeId < 0)) - { - status = IX_NPEDL_PARAM_ERR; - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeInitAndStartInternal - " - "invalid parameter\n"); - } - - else - { - /* Ensure initialisation has been completed */ - ixNpeDlNpeMgrInit(); - - /* Checking if image being loaded is meant for device that is running. - * Image is forward compatible. i.e Image built for IXP42X should run - * on IXP46X but not vice versa.*/ - if (deviceId > (ixFeatureCtrlDeviceRead() & IX_FEATURE_CTRL_DEVICE_TYPE_MASK)) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeInitAndStartInternal - " - "Device type mismatch. NPE Image not " - "meant for device in use \n"); - return IX_NPEDL_DEVICE_ERR; - }/* if statement - matching image device and current device */ - - /* If not IXP42X A0 stepping, proceed to check for existence of npe's */ - if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != - (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) - || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) - { - if (npeId == IX_NPEDL_NPEID_NPEA) - { - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA) == - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - IX_NPEDL_WARNING_REPORT("Warning: the NPE A component you specified does" - " not exist\n"); - return IX_SUCCESS; - } - } /* end of if(npeId) */ - else if (npeId == IX_NPEDL_NPEID_NPEB) - { - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)== - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - IX_NPEDL_WARNING_REPORT("Warning: the NPE B component you specified" - " does not exist\n"); - return IX_SUCCESS; - } - } /* end of elseif(npeId) */ - else if (npeId == IX_NPEDL_NPEID_NPEC) - { - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)== - IX_FEATURE_CTRL_COMPONENT_DISABLED) - { - IX_NPEDL_WARNING_REPORT("Warning: the NPE C component you specified" - " does not exist\n"); - return IX_SUCCESS; - } - } /* end of elseif(npeId) */ - } /* end of if not IXP42X-A0 Silicon */ - - /* stop and reset the NPE */ - status = ixNpeDlNpeStopAndReset (npeId); - if (IX_SUCCESS != status) - { - IX_NPEDL_ERROR_REPORT ("Failed to stop and reset NPE\n"); - return status; - } - - /* Locate image */ - status = ixNpeDlImageMgrImageFind (imageLibrary, imageId, - &imageCodePtr, &imageSize); - if (IX_SUCCESS == status) - { - /* - * If download was successful, store image Id in list of - * currently loaded images. If a critical error occured - * during download, record that the NPE has an invalid image - */ - status = ixNpeDlNpeMgrImageLoad (npeId, imageCodePtr, true); - if (IX_SUCCESS == status) - { - ixNpeDlNpeState[npeId].validImage = true; - ixNpeDlStats.successfulDownloads++; - - status = ixNpeDlNpeExecutionStart (npeId); - } - else if ((status == IX_NPEDL_CRITICAL_NPE_ERR) || - (status == IX_NPEDL_CRITICAL_MICROCODE_ERR)) - { - ixNpeDlNpeState[npeId].validImage = false; - ixNpeDlStats.criticalFailDownloads++; - } - - /* NOTE - The following section of code is here to support - * a deprecated function ixNpeDlLoadedImageGet(). When that - * function is removed from the API, this code should be revised. - */ - ixNpeDlNpeState[npeId].imageId.npeId = npeId; - ixNpeDlNpeState[npeId].imageId.functionalityId = - IX_NPEDL_FUNCTIONID_FROM_IMAGEID_GET(imageId); - ixNpeDlNpeState[npeId].imageId.major = - IX_NPEDL_MAJOR_FROM_IMAGEID_GET(imageId); - ixNpeDlNpeState[npeId].imageId.minor = - IX_NPEDL_MINOR_FROM_IMAGEID_GET(imageId); - } /* end of if(IX_SUCCESS) */ /* condition: image located successfully in microcode image */ - } /* end of if-else(npeId-deviceId) */ /* condition: parameter checks ok */ - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeInitAndStartInternal : " - "status = %d\n", status); - return status; -} - -/* - * Function definition: ixNpeDlCustomImageNpeInitAndStart - */ -PUBLIC IX_STATUS -ixNpeDlCustomImageNpeInitAndStart (UINT32 *imageLibrary, - UINT32 imageId) -{ - IX_STATUS status; - - if (imageLibrary == NULL) - { - status = IX_NPEDL_PARAM_ERR; - IX_NPEDL_ERROR_REPORT ("ixNpeDlCustomImageNpeInitAndStart " - "- invalid parameter\n"); - } - else - { - status = ixNpeDlNpeInitAndStartInternal (imageLibrary, imageId); - } /* end of if-else(imageLibrary) */ - - return status; -} - -/* - * Function definition: ixNpeDlNpeInitAndStart - */ -PUBLIC IX_STATUS -ixNpeDlNpeInitAndStart (UINT32 imageId) -{ - return ixNpeDlNpeInitAndStartInternal (NULL, imageId); -} - -/* - * Function definition: ixNpeDlLoadedImageFunctionalityGet - */ -PUBLIC IX_STATUS -ixNpeDlLoadedImageFunctionalityGet (IxNpeDlNpeId npeId, - UINT8 *functionalityId) -{ - /* Check input parameters */ - if ((npeId >= IX_NPEDL_NPEID_MAX) || (npeId < 0)) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlLoadedImageFunctionalityGet " - "- invalid parameter\n"); - return IX_NPEDL_PARAM_ERR; - } - if (functionalityId == NULL) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlLoadedImageFunctionalityGet " - "- invalid parameter\n"); - return IX_NPEDL_PARAM_ERR; - } - - if (ixNpeDlNpeState[npeId].validImage) - { - *functionalityId = ixNpeDlNpeState[npeId].imageId.functionalityId; - return IX_SUCCESS; - } - else - { - return IX_FAIL; - } -} diff --git a/drivers/net/npe/IxNpeDlImageMgr.c b/drivers/net/npe/IxNpeDlImageMgr.c deleted file mode 100644 index 52f73d7ad8..0000000000 --- a/drivers/net/npe/IxNpeDlImageMgr.c +++ /dev/null @@ -1,663 +0,0 @@ -/** - * @file IxNpeDlImageMgr.c - * - * @author Intel Corporation - * @date 09 January 2002 - * - * @brief This file contains the implementation of the private API for the - * IXP425 NPE Downloader ImageMgr module - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - - -/* - * Put the system defined include files required. - */ -#include "IxOsal.h" - -/* - * Put the user defined include files required. - */ -#include "IxNpeDlImageMgr_p.h" -#include "IxNpeDlMacros_p.h" - -/* - * define the flag which toggles the firmare inclusion - */ -#define IX_NPE_MICROCODE_FIRMWARE_INCLUDED 1 -#include "IxNpeMicrocode.h" - -/* - * Indicates the start of an NPE Image, in new NPE Image Library format. - * 2 consecutive occurances indicates the end of the NPE Image Library - */ -#define NPE_IMAGE_MARKER 0xfeedf00d - -/* - * Typedefs whose scope is limited to this file. - */ - -/* - * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT - * TO BE DEPRECATED IN A FUTURE RELEASE - */ -typedef struct -{ - UINT32 size; - UINT32 offset; - UINT32 id; -} IxNpeDlImageMgrImageEntry; - -/* - * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT - * TO BE DEPRECATED IN A FUTURE RELEASE - */ -typedef union -{ - IxNpeDlImageMgrImageEntry image; - UINT32 eohMarker; -} IxNpeDlImageMgrHeaderEntry; - -/* - * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT - * TO BE DEPRECATED IN A FUTURE RELEASE - */ -typedef struct -{ - UINT32 signature; - /* 1st entry in the header (there may be more than one) */ - IxNpeDlImageMgrHeaderEntry entry[1]; -} IxNpeDlImageMgrImageLibraryHeader; - - -/* - * NPE Image Header definition, used in new NPE Image Library format - */ -typedef struct -{ - UINT32 marker; - UINT32 id; - UINT32 size; -} IxNpeDlImageMgrImageHeader; - -/* module statistics counters */ -typedef struct -{ - UINT32 invalidSignature; - UINT32 imageIdListOverflow; - UINT32 imageIdNotFound; -} IxNpeDlImageMgrStats; - - -/* - * Variable declarations global to this file only. Externs are followed by - * static variables. - */ -static IxNpeDlImageMgrStats ixNpeDlImageMgrStats; - -static UINT32* getIxNpeMicroCodeImageLibrary(void) -{ - char *s; - - if ((s = getenv("npe_ucode")) != NULL) - return (UINT32*) simple_strtoul(s, NULL, 16); - else - return NULL; -} - -/* - * static function prototypes. - */ -PRIVATE BOOL -ixNpeDlImageMgrSignatureCheck (UINT32 *microCodeImageLibrary); - -PRIVATE void -ixNpeDlImageMgrImageIdFormat (UINT32 rawImageId, IxNpeDlImageId *imageId); - -PRIVATE BOOL -ixNpeDlImageMgrImageIdCompare (IxNpeDlImageId *imageIdA, - IxNpeDlImageId *imageIdB); - -PRIVATE BOOL -ixNpeDlImageMgrNpeFunctionIdCompare (IxNpeDlImageId *imageIdA, - IxNpeDlImageId *imageIdB); - -#if 0 -PRIVATE IX_STATUS -ixNpeDlImageMgrImageFind_legacy (UINT32 *imageLibrary, - UINT32 imageId, - UINT32 **imagePtr, - UINT32 *imageSize); - -/* - * Function definition: ixNpeDlImageMgrMicrocodeImageLibraryOverride - * - * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT - * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE - */ -IX_STATUS -ixNpeDlImageMgrMicrocodeImageLibraryOverride ( - UINT32 *clientImageLibrary) -{ - IX_STATUS status = IX_SUCCESS; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlImageMgrMicrocodeImageLibraryOverride\n"); - - if (ixNpeDlImageMgrSignatureCheck (clientImageLibrary)) - { - IxNpeMicroCodeImageLibrary = clientImageLibrary; - } - else - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrMicrocodeImageLibraryOverride: " - "Client-supplied image has invalid signature\n"); - status = IX_FAIL; - } - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlImageMgrMicrocodeImageLibraryOverride: status = %d\n", - status); - return status; -} -#endif - -/* - * Function definition: ixNpeDlImageMgrImageListExtract - * - * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT - * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE - */ -IX_STATUS -ixNpeDlImageMgrImageListExtract ( - IxNpeDlImageId *imageListPtr, - UINT32 *numImages) -{ - UINT32 rawImageId; - IxNpeDlImageId formattedImageId; - IX_STATUS status = IX_SUCCESS; - UINT32 imageCount = 0; - IxNpeDlImageMgrImageLibraryHeader *header; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlImageMgrImageListExtract\n"); - - header = (IxNpeDlImageMgrImageLibraryHeader *) getIxNpeMicroCodeImageLibrary(); - - if (ixNpeDlImageMgrSignatureCheck (getIxNpeMicroCodeImageLibrary())) - { - /* for each image entry in the image header ... */ - while (header->entry[imageCount].eohMarker != - IX_NPEDL_IMAGEMGR_END_OF_HEADER) - { - /* - * if the image list container from calling function has capacity, - * add the image id to the list - */ - if ((imageListPtr != NULL) && (imageCount < *numImages)) - { - rawImageId = header->entry[imageCount].image.id; - ixNpeDlImageMgrImageIdFormat (rawImageId, &formattedImageId); - imageListPtr[imageCount] = formattedImageId; - } - /* imageCount reflects no. of image entries in image library header */ - imageCount++; - } - - /* - * if image list container from calling function was too small to - * contain all image ids in the header, set return status to FAIL - */ - if ((imageListPtr != NULL) && (imageCount > *numImages)) - { - status = IX_FAIL; - IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageListExtract: " - "number of Ids found exceeds list capacity\n"); - ixNpeDlImageMgrStats.imageIdListOverflow++; - } - /* return number of image ids found in image library header */ - *numImages = imageCount; - } - else - { - status = IX_FAIL; - IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageListExtract: " - "invalid signature in image\n"); - } - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlImageMgrImageListExtract: status = %d\n", - status); - return status; -} - - -/* - * Function definition: ixNpeDlImageMgrImageLocate - * - * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT - * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE - */ -IX_STATUS -ixNpeDlImageMgrImageLocate ( - IxNpeDlImageId *imageId, - UINT32 **imagePtr, - UINT32 *imageSize) -{ - UINT32 imageOffset; - UINT32 rawImageId; - IxNpeDlImageId formattedImageId; - /* used to index image entries in image library header */ - UINT32 imageCount = 0; - IX_STATUS status = IX_FAIL; - IxNpeDlImageMgrImageLibraryHeader *header; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlImageMgrImageLocate\n"); - - header = (IxNpeDlImageMgrImageLibraryHeader *) getIxNpeMicroCodeImageLibrary(); - - if (ixNpeDlImageMgrSignatureCheck (getIxNpeMicroCodeImageLibrary())) - { - /* for each image entry in the image library header ... */ - while (header->entry[imageCount].eohMarker != - IX_NPEDL_IMAGEMGR_END_OF_HEADER) - { - rawImageId = header->entry[imageCount].image.id; - ixNpeDlImageMgrImageIdFormat (rawImageId, &formattedImageId); - /* if a match for imageId is found in the image library header... */ - if (ixNpeDlImageMgrImageIdCompare (imageId, &formattedImageId)) - { - /* - * get pointer to the image in the image library using offset from - * 1st word in image library - */ - UINT32 *tmp=getIxNpeMicroCodeImageLibrary(); - imageOffset = header->entry[imageCount].image.offset; - *imagePtr = &tmp[imageOffset]; - /* get the image size */ - *imageSize = header->entry[imageCount].image.size; - status = IX_SUCCESS; - break; - } - imageCount++; - } - if (status != IX_SUCCESS) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageLocate: " - "imageId not found in image library header\n"); - ixNpeDlImageMgrStats.imageIdNotFound++; - } - } - else - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageLocate: " - "invalid signature in image library\n"); - } - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlImageMgrImageLocate: status = %d\n", status); - return status; -} - -/* - * Function definition: ixNpeDlImageMgrLatestImageExtract - * - * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT - * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE - */ -IX_STATUS -ixNpeDlImageMgrLatestImageExtract (IxNpeDlImageId *imageId) -{ - UINT32 imageCount = 0; - UINT32 rawImageId; - IxNpeDlImageId formattedImageId; - IX_STATUS status = IX_FAIL; - IxNpeDlImageMgrImageLibraryHeader *header; - - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlImageMgrLatestImageExtract\n"); - - header = (IxNpeDlImageMgrImageLibraryHeader *) getIxNpeMicroCodeImageLibrary(); - - if (ixNpeDlImageMgrSignatureCheck (getIxNpeMicroCodeImageLibrary())) - { - /* for each image entry in the image library header ... */ - while (header->entry[imageCount].eohMarker != - IX_NPEDL_IMAGEMGR_END_OF_HEADER) - { - rawImageId = header->entry[imageCount].image.id; - ixNpeDlImageMgrImageIdFormat (rawImageId, &formattedImageId); - /* - * if a match for the npe Id and functionality Id of the imageId is - * found in the image library header... - */ - if(ixNpeDlImageMgrNpeFunctionIdCompare(imageId, &formattedImageId)) - { - if(imageId->major <= formattedImageId.major) - { - if(imageId->minor < formattedImageId.minor) - { - imageId->minor = formattedImageId.minor; - } - imageId->major = formattedImageId.major; - } - status = IX_SUCCESS; - } - imageCount++; - } - if (status != IX_SUCCESS) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrLatestImageExtract: " - "imageId not found in image library header\n"); - ixNpeDlImageMgrStats.imageIdNotFound++; - } - } - else - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrLatestImageGet: " - "invalid signature in image library\n"); - } - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlImageMgrLatestImageGet: status = %d\n", status); - return status; -} - -/* - * Function definition: ixNpeDlImageMgrSignatureCheck - * - * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT - * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE - */ -PRIVATE BOOL -ixNpeDlImageMgrSignatureCheck (UINT32 *microCodeImageLibrary) -{ - IxNpeDlImageMgrImageLibraryHeader *header = - (IxNpeDlImageMgrImageLibraryHeader *) microCodeImageLibrary; - BOOL result = true; - - if (!header || header->signature != IX_NPEDL_IMAGEMGR_SIGNATURE) - { - result = false; - ixNpeDlImageMgrStats.invalidSignature++; - } - - return result; -} - - -/* - * Function definition: ixNpeDlImageMgrImageIdFormat - * - * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT - * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE - */ -PRIVATE void -ixNpeDlImageMgrImageIdFormat ( - UINT32 rawImageId, - IxNpeDlImageId *imageId) -{ - imageId->npeId = (rawImageId >> - IX_NPEDL_IMAGEID_NPEID_OFFSET) & - IX_NPEDL_NPEIMAGE_FIELD_MASK; - imageId->functionalityId = (rawImageId >> - IX_NPEDL_IMAGEID_FUNCTIONID_OFFSET) & - IX_NPEDL_NPEIMAGE_FIELD_MASK; - imageId->major = (rawImageId >> - IX_NPEDL_IMAGEID_MAJOR_OFFSET) & - IX_NPEDL_NPEIMAGE_FIELD_MASK; - imageId->minor = (rawImageId >> - IX_NPEDL_IMAGEID_MINOR_OFFSET) & - IX_NPEDL_NPEIMAGE_FIELD_MASK; - -} - - -/* - * Function definition: ixNpeDlImageMgrImageIdCompare - * - * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT - * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE - */ -PRIVATE BOOL -ixNpeDlImageMgrImageIdCompare ( - IxNpeDlImageId *imageIdA, - IxNpeDlImageId *imageIdB) -{ - if ((imageIdA->npeId == imageIdB->npeId) && - (imageIdA->functionalityId == imageIdB->functionalityId) && - (imageIdA->major == imageIdB->major) && - (imageIdA->minor == imageIdB->minor)) - { - return true; - } - else - { - return false; - } -} - -/* - * Function definition: ixNpeDlImageMgrNpeFunctionIdCompare - * - * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT - * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE - */ -PRIVATE BOOL -ixNpeDlImageMgrNpeFunctionIdCompare ( - IxNpeDlImageId *imageIdA, - IxNpeDlImageId *imageIdB) -{ - if ((imageIdA->npeId == imageIdB->npeId) && - (imageIdA->functionalityId == imageIdB->functionalityId)) - { - return true; - } - else - { - return false; - } -} - - -/* - * Function definition: ixNpeDlImageMgrStatsShow - */ -void -ixNpeDlImageMgrStatsShow (void) -{ - ixOsalLog (IX_OSAL_LOG_LVL_USER, - IX_OSAL_LOG_DEV_STDOUT, - "\nixNpeDlImageMgrStatsShow:\n" - "\tInvalid Image Signatures: %u\n" - "\tImage Id List capacity too small: %u\n" - "\tImage Id not found: %u\n\n", - ixNpeDlImageMgrStats.invalidSignature, - ixNpeDlImageMgrStats.imageIdListOverflow, - ixNpeDlImageMgrStats.imageIdNotFound, - 0,0,0); -} - - -/* - * Function definition: ixNpeDlImageMgrStatsReset - */ -void -ixNpeDlImageMgrStatsReset (void) -{ - ixNpeDlImageMgrStats.invalidSignature = 0; - ixNpeDlImageMgrStats.imageIdListOverflow = 0; - ixNpeDlImageMgrStats.imageIdNotFound = 0; -} - - -#if 0 -/* - * Function definition: ixNpeDlImageMgrImageFind_legacy - * - * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT - * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE - */ -PRIVATE IX_STATUS -ixNpeDlImageMgrImageFind_legacy ( - UINT32 *imageLibrary, - UINT32 imageId, - UINT32 **imagePtr, - UINT32 *imageSize) -{ - UINT32 imageOffset; - /* used to index image entries in image library header */ - UINT32 imageCount = 0; - IX_STATUS status = IX_FAIL; - IxNpeDlImageMgrImageLibraryHeader *header; - BOOL imageFound = false; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlImageMgrImageFind\n"); - - - /* If user didn't specify a library to use, use the default - * one from IxNpeMicrocode.h - */ - if (imageLibrary == NULL) - { - imageLibrary = IxNpeMicroCodeImageLibrary; - } - - if (ixNpeDlImageMgrSignatureCheck (imageLibrary)) - { - header = (IxNpeDlImageMgrImageLibraryHeader *) imageLibrary; - - /* for each image entry in the image library header ... */ - while ((header->entry[imageCount].eohMarker != - IX_NPEDL_IMAGEMGR_END_OF_HEADER) && !(imageFound)) - { - /* if a match for imageId is found in the image library header... */ - if (imageId == header->entry[imageCount].image.id) - { - /* - * get pointer to the image in the image library using offset from - * 1st word in image library - */ - imageOffset = header->entry[imageCount].image.offset; - *imagePtr = &imageLibrary[imageOffset]; - /* get the image size */ - *imageSize = header->entry[imageCount].image.size; - status = IX_SUCCESS; - imageFound = true; - } - imageCount++; - } - if (status != IX_SUCCESS) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageFind: " - "imageId not found in image library header\n"); - ixNpeDlImageMgrStats.imageIdNotFound++; - } - } - else - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageFind: " - "invalid signature in image library\n"); - } - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlImageMgrImageFind: status = %d\n", status); - return status; -} -#endif - -/* - * Function definition: ixNpeDlImageMgrImageFind - */ -IX_STATUS -ixNpeDlImageMgrImageFind ( - UINT32 *imageLibrary, - UINT32 imageId, - UINT32 **imagePtr, - UINT32 *imageSize) -{ - IxNpeDlImageMgrImageHeader *image; - UINT32 offset = 0; - - /* If user didn't specify a library to use, use the default - * one from IxNpeMicrocode.h - */ - if (imageLibrary == NULL) - { -#ifdef IX_NPEDL_READ_MICROCODE_FROM_FILE - if (ixNpeMicrocode_binaryArray == NULL) - { - printk (KERN_ERR "ixp400.o: ERROR, no Microcode found in memory\n"); - return IX_FAIL; - } - else - { - imageLibrary = ixNpeMicrocode_binaryArray; - } -#else - imageLibrary = getIxNpeMicroCodeImageLibrary(); - if (imageLibrary == NULL) - { - printf ("npe: ERROR, no Microcode found in memory\n"); - return IX_FAIL; - } -#endif /* IX_NPEDL_READ_MICROCODE_FROM_FILE */ - } - -#if 0 - /* For backward's compatibility with previous image format */ - if (ixNpeDlImageMgrSignatureCheck(imageLibrary)) - { - return ixNpeDlImageMgrImageFind_legacy(imageLibrary, - imageId, - imagePtr, - imageSize); - } -#endif - - while (*(imageLibrary+offset) == NPE_IMAGE_MARKER) - { - image = (IxNpeDlImageMgrImageHeader *)(imageLibrary+offset); - offset += sizeof(IxNpeDlImageMgrImageHeader)/sizeof(UINT32); - - if (image->id == imageId) - { - *imagePtr = imageLibrary + offset; - *imageSize = image->size; - return IX_SUCCESS; - } - /* 2 consecutive NPE_IMAGE_MARKER's indicates end of library */ - else if (image->id == NPE_IMAGE_MARKER) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageFind: " - "imageId not found in image library header\n"); - ixNpeDlImageMgrStats.imageIdNotFound++; - /* reached end of library, image not found */ - return IX_FAIL; - } - offset += image->size; - } - - /* If we get here, our image library may be corrupted */ - IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageFind: " - "image library format may be invalid or corrupted\n"); - return IX_FAIL; -} - diff --git a/drivers/net/npe/IxNpeDlNpeMgr.c b/drivers/net/npe/IxNpeDlNpeMgr.c deleted file mode 100644 index 8d94dfac3d..0000000000 --- a/drivers/net/npe/IxNpeDlNpeMgr.c +++ /dev/null @@ -1,907 +0,0 @@ -/** - * @file IxNpeDlNpeMgr.c - * - * @author Intel Corporation - * @date 09 January 2002 - * - * @brief This file contains the implementation of the private API for the - * IXP425 NPE Downloader NpeMgr module - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - - -/* - * Put the user defined include files required. - */ -#include "IxOsal.h" -#include "IxNpeDl.h" -#include "IxNpeDlNpeMgr_p.h" -#include "IxNpeDlNpeMgrUtils_p.h" -#include "IxNpeDlNpeMgrEcRegisters_p.h" -#include "IxNpeDlMacros_p.h" -#include "IxFeatureCtrl.h" - -/* - * #defines and macros used in this file. - */ -#define IX_NPEDL_BYTES_PER_WORD 4 - -/* used to read download map from version in microcode image */ -#define IX_NPEDL_BLOCK_TYPE_INSTRUCTION 0x00000000 -#define IX_NPEDL_BLOCK_TYPE_DATA 0x00000001 -#define IX_NPEDL_BLOCK_TYPE_STATE 0x00000002 -#define IX_NPEDL_END_OF_DOWNLOAD_MAP 0x0000000F - -/* - * masks used to extract address info from State information context - * register addresses as read from microcode image - */ -#define IX_NPEDL_MASK_STATE_ADDR_CTXT_REG 0x0000000F -#define IX_NPEDL_MASK_STATE_ADDR_CTXT_NUM 0x000000F0 - -/* LSB offset of Context Number field in State-Info Context Address */ -#define IX_NPEDL_OFFSET_STATE_ADDR_CTXT_NUM 4 - -/* size (in words) of single State Information entry (ctxt reg address|data) */ -#define IX_NPEDL_STATE_INFO_ENTRY_SIZE 2 - - - #define IX_NPEDL_RESET_NPE_PARITY 0x0800 - #define IX_NPEDL_PARITY_BIT_MASK 0x3F00FFFF - #define IX_NPEDL_CONFIG_CTRL_REG_MASK 0x3F3FFFFF - - -/* - * Typedefs whose scope is limited to this file. - */ - -typedef struct -{ - UINT32 type; - UINT32 offset; -} IxNpeDlNpeMgrDownloadMapBlockEntry; - -typedef union -{ - IxNpeDlNpeMgrDownloadMapBlockEntry block; - UINT32 eodmMarker; -} IxNpeDlNpeMgrDownloadMapEntry; - -typedef struct -{ - /* 1st entry in the download map (there may be more than one) */ - IxNpeDlNpeMgrDownloadMapEntry entry[1]; -} IxNpeDlNpeMgrDownloadMap; - - -/* used to access an instruction or data block in a microcode image */ -typedef struct -{ - UINT32 npeMemAddress; - UINT32 size; - UINT32 data[1]; -} IxNpeDlNpeMgrCodeBlock; - -/* used to access each Context Reg entry state-information block */ -typedef struct -{ - UINT32 addressInfo; - UINT32 value; -} IxNpeDlNpeMgrStateInfoCtxtRegEntry; - -/* used to access a state-information block in a microcode image */ -typedef struct -{ - UINT32 size; - IxNpeDlNpeMgrStateInfoCtxtRegEntry ctxtRegEntry[1]; -} IxNpeDlNpeMgrStateInfoBlock; - -/* used to store some useful NPE information for easy access */ -typedef struct -{ - UINT32 baseAddress; - UINT32 insMemSize; - UINT32 dataMemSize; -} IxNpeDlNpeInfo; - -/* used to distinguish instruction and data memory operations */ -typedef enum -{ - IX_NPEDL_MEM_TYPE_INSTRUCTION = 0, - IX_NPEDL_MEM_TYPE_DATA -} IxNpeDlNpeMemType; - -/* used to hold a reset value for a particular ECS register */ -typedef struct -{ - UINT32 regAddr; - UINT32 regResetVal; -} IxNpeDlEcsRegResetValue; - -/* prototype of function to write either Instruction or Data memory */ -typedef IX_STATUS (*IxNpeDlNpeMgrMemWrite) (UINT32 npeBaseAddress, - UINT32 npeMemAddress, - UINT32 npeMemData, - BOOL verify); - -/* module statistics counters */ -typedef struct -{ - UINT32 instructionBlocksLoaded; - UINT32 dataBlocksLoaded; - UINT32 stateInfoBlocksLoaded; - UINT32 criticalNpeErrors; - UINT32 criticalMicrocodeErrors; - UINT32 npeStarts; - UINT32 npeStops; - UINT32 npeResets; -} IxNpeDlNpeMgrStats; - - -/* - * Variable declarations global to this file only. Externs are followed by - * static variables. - */ -static IxNpeDlNpeInfo ixNpeDlNpeInfo[] = -{ - { - 0, - IX_NPEDL_INS_MEMSIZE_WORDS_NPEA, - IX_NPEDL_DATA_MEMSIZE_WORDS_NPEA - }, - { - 0, - IX_NPEDL_INS_MEMSIZE_WORDS_NPEB, - IX_NPEDL_DATA_MEMSIZE_WORDS_NPEB - }, - { - 0, - IX_NPEDL_INS_MEMSIZE_WORDS_NPEC, - IX_NPEDL_DATA_MEMSIZE_WORDS_NPEC - } -}; - -/* contains Reset values for Context Store Registers */ -static UINT32 ixNpeDlCtxtRegResetValues[] = -{ - IX_NPEDL_CTXT_REG_RESET_STEVT, - IX_NPEDL_CTXT_REG_RESET_STARTPC, - IX_NPEDL_CTXT_REG_RESET_REGMAP, - IX_NPEDL_CTXT_REG_RESET_CINDEX, -}; - -/* contains Reset values for Context Store Registers */ -static IxNpeDlEcsRegResetValue ixNpeDlEcsRegResetValues[] = -{ - {IX_NPEDL_ECS_BG_CTXT_REG_0, IX_NPEDL_ECS_BG_CTXT_REG_0_RESET}, - {IX_NPEDL_ECS_BG_CTXT_REG_1, IX_NPEDL_ECS_BG_CTXT_REG_1_RESET}, - {IX_NPEDL_ECS_BG_CTXT_REG_2, IX_NPEDL_ECS_BG_CTXT_REG_2_RESET}, - {IX_NPEDL_ECS_PRI_1_CTXT_REG_0, IX_NPEDL_ECS_PRI_1_CTXT_REG_0_RESET}, - {IX_NPEDL_ECS_PRI_1_CTXT_REG_1, IX_NPEDL_ECS_PRI_1_CTXT_REG_1_RESET}, - {IX_NPEDL_ECS_PRI_1_CTXT_REG_2, IX_NPEDL_ECS_PRI_1_CTXT_REG_2_RESET}, - {IX_NPEDL_ECS_PRI_2_CTXT_REG_0, IX_NPEDL_ECS_PRI_2_CTXT_REG_0_RESET}, - {IX_NPEDL_ECS_PRI_2_CTXT_REG_1, IX_NPEDL_ECS_PRI_2_CTXT_REG_1_RESET}, - {IX_NPEDL_ECS_PRI_2_CTXT_REG_2, IX_NPEDL_ECS_PRI_2_CTXT_REG_2_RESET}, - {IX_NPEDL_ECS_DBG_CTXT_REG_0, IX_NPEDL_ECS_DBG_CTXT_REG_0_RESET}, - {IX_NPEDL_ECS_DBG_CTXT_REG_1, IX_NPEDL_ECS_DBG_CTXT_REG_1_RESET}, - {IX_NPEDL_ECS_DBG_CTXT_REG_2, IX_NPEDL_ECS_DBG_CTXT_REG_2_RESET}, - {IX_NPEDL_ECS_INSTRUCT_REG, IX_NPEDL_ECS_INSTRUCT_REG_RESET} -}; - -static IxNpeDlNpeMgrStats ixNpeDlNpeMgrStats; - -/* Set when NPE register memory has been mapped */ -static BOOL ixNpeDlMemInitialised = false; - - -/* - * static function prototypes. - */ -PRIVATE IX_STATUS -ixNpeDlNpeMgrMemLoad (IxNpeDlNpeId npeId, UINT32 npeBaseAddress, - IxNpeDlNpeMgrCodeBlock *codeBlockPtr, - BOOL verify, IxNpeDlNpeMemType npeMemType); -PRIVATE IX_STATUS -ixNpeDlNpeMgrStateInfoLoad (UINT32 npeBaseAddress, - IxNpeDlNpeMgrStateInfoBlock *codeBlockPtr, - BOOL verify); -PRIVATE BOOL -ixNpeDlNpeMgrBitsSetCheck (UINT32 npeBaseAddress, UINT32 regOffset, - UINT32 expectedBitsSet); - -PRIVATE UINT32 -ixNpeDlNpeMgrBaseAddressGet (IxNpeDlNpeId npeId); - -/* - * Function definition: ixNpeDlNpeMgrBaseAddressGet - */ -PRIVATE UINT32 -ixNpeDlNpeMgrBaseAddressGet (IxNpeDlNpeId npeId) -{ - IX_OSAL_ASSERT (ixNpeDlMemInitialised); - return ixNpeDlNpeInfo[npeId].baseAddress; -} - - -/* - * Function definition: ixNpeDlNpeMgrInit - */ -void -ixNpeDlNpeMgrInit (void) -{ - /* Only map the memory once */ - if (!ixNpeDlMemInitialised) - { - UINT32 virtAddr; - - /* map the register memory for NPE-A */ - virtAddr = (UINT32) IX_OSAL_MEM_MAP (IX_NPEDL_NPEBASEADDRESS_NPEA, - IX_OSAL_IXP400_NPEA_MAP_SIZE); - IX_OSAL_ASSERT(virtAddr); - ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEA].baseAddress = virtAddr; - - /* map the register memory for NPE-B */ - virtAddr = (UINT32) IX_OSAL_MEM_MAP (IX_NPEDL_NPEBASEADDRESS_NPEB, - IX_OSAL_IXP400_NPEB_MAP_SIZE); - IX_OSAL_ASSERT(virtAddr); - ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEB].baseAddress = virtAddr; - - /* map the register memory for NPE-C */ - virtAddr = (UINT32) IX_OSAL_MEM_MAP (IX_NPEDL_NPEBASEADDRESS_NPEC, - IX_OSAL_IXP400_NPEC_MAP_SIZE); - IX_OSAL_ASSERT(virtAddr); - ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEC].baseAddress = virtAddr; - - ixNpeDlMemInitialised = true; - } -} - - -/* - * Function definition: ixNpeDlNpeMgrUninit - */ -IX_STATUS -ixNpeDlNpeMgrUninit (void) -{ - if (!ixNpeDlMemInitialised) - { - return IX_FAIL; - } - - IX_OSAL_MEM_UNMAP (ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEA].baseAddress); - IX_OSAL_MEM_UNMAP (ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEB].baseAddress); - IX_OSAL_MEM_UNMAP (ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEC].baseAddress); - - ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEA].baseAddress = 0; - ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEB].baseAddress = 0; - ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEC].baseAddress = 0; - - ixNpeDlMemInitialised = false; - - return IX_SUCCESS; -} - -/* - * Function definition: ixNpeDlNpeMgrImageLoad - */ -IX_STATUS -ixNpeDlNpeMgrImageLoad ( - IxNpeDlNpeId npeId, - UINT32 *imageCodePtr, - BOOL verify) -{ - UINT32 npeBaseAddress; - IxNpeDlNpeMgrDownloadMap *downloadMap; - UINT32 *blockPtr; - UINT32 mapIndex = 0; - IX_STATUS status = IX_SUCCESS; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrImageLoad\n"); - - /* get base memory address of NPE from npeId */ - npeBaseAddress = ixNpeDlNpeMgrBaseAddressGet (npeId); - - /* check execution status of NPE to verify NPE Stop was successful */ - if (!ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, - IX_NPEDL_EXCTL_STATUS_STOP)) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrImageDownload - " - "NPE was not stopped before download\n"); - status = IX_FAIL; - } - else - { - /* - * Read Download Map, checking each block type and calling - * appropriate function to perform download - */ - downloadMap = (IxNpeDlNpeMgrDownloadMap *) imageCodePtr; - while ((downloadMap->entry[mapIndex].eodmMarker != - IX_NPEDL_END_OF_DOWNLOAD_MAP) - && (status == IX_SUCCESS)) - { - /* calculate pointer to block to be downloaded */ - blockPtr = imageCodePtr + - downloadMap->entry[mapIndex].block.offset; - - switch (downloadMap->entry[mapIndex].block.type) - { - case IX_NPEDL_BLOCK_TYPE_INSTRUCTION: - status = ixNpeDlNpeMgrMemLoad (npeId, npeBaseAddress, - (IxNpeDlNpeMgrCodeBlock *)blockPtr, - verify, - IX_NPEDL_MEM_TYPE_INSTRUCTION); - break; - case IX_NPEDL_BLOCK_TYPE_DATA: - status = ixNpeDlNpeMgrMemLoad (npeId, npeBaseAddress, - (IxNpeDlNpeMgrCodeBlock *)blockPtr, - verify, IX_NPEDL_MEM_TYPE_DATA); - break; - case IX_NPEDL_BLOCK_TYPE_STATE: - status = ixNpeDlNpeMgrStateInfoLoad (npeBaseAddress, - (IxNpeDlNpeMgrStateInfoBlock *) blockPtr, - verify); - break; - default: - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrImageLoad: " - "unknown block type in download map\n"); - status = IX_NPEDL_CRITICAL_MICROCODE_ERR; - ixNpeDlNpeMgrStats.criticalMicrocodeErrors++; - break; - } - mapIndex++; - }/* loop: for each entry in download map, while status == SUCCESS */ - }/* condition: NPE stopped before attempting download */ - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrImageLoad : status = %d\n", - status); - return status; -} - - -/* - * Function definition: ixNpeDlNpeMgrMemLoad - */ -PRIVATE IX_STATUS -ixNpeDlNpeMgrMemLoad ( - IxNpeDlNpeId npeId, - UINT32 npeBaseAddress, - IxNpeDlNpeMgrCodeBlock *blockPtr, - BOOL verify, - IxNpeDlNpeMemType npeMemType) -{ - UINT32 npeMemAddress; - UINT32 blockSize; - UINT32 memSize = 0; - IxNpeDlNpeMgrMemWrite memWriteFunc = NULL; - UINT32 localIndex = 0; - IX_STATUS status = IX_SUCCESS; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrMemLoad\n"); - - /* - * select NPE EXCTL reg read/write commands depending on memory - * type (instruction/data) to be accessed - */ - if (npeMemType == IX_NPEDL_MEM_TYPE_INSTRUCTION) - { - memSize = ixNpeDlNpeInfo[npeId].insMemSize; - memWriteFunc = (IxNpeDlNpeMgrMemWrite) ixNpeDlNpeMgrInsMemWrite; - } - else if (npeMemType == IX_NPEDL_MEM_TYPE_DATA) - { - memSize = ixNpeDlNpeInfo[npeId].dataMemSize; - memWriteFunc = (IxNpeDlNpeMgrMemWrite) ixNpeDlNpeMgrDataMemWrite; - } - - /* - * NPE memory is loaded contiguously from each block, so only address - * of 1st word in block is needed - */ - npeMemAddress = blockPtr->npeMemAddress; - /* number of words of instruction/data microcode in block to download */ - blockSize = blockPtr->size; - if ((npeMemAddress + blockSize) > memSize) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrMemLoad: " - "Block size too big for NPE memory\n"); - status = IX_NPEDL_CRITICAL_MICROCODE_ERR; - ixNpeDlNpeMgrStats.criticalMicrocodeErrors++; - } - else - { - for (localIndex = 0; localIndex < blockSize; localIndex++) - { - status = memWriteFunc (npeBaseAddress, npeMemAddress, - blockPtr->data[localIndex], verify); - - if (status != IX_SUCCESS) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrMemLoad: " - "write to NPE memory failed\n"); - status = IX_NPEDL_CRITICAL_NPE_ERR; - ixNpeDlNpeMgrStats.criticalNpeErrors++; - break; /* abort download */ - } - /* increment target (word)address in NPE memory */ - npeMemAddress++; - } - }/* condition: block size will fit in NPE memory */ - - if (status == IX_SUCCESS) - { - if (npeMemType == IX_NPEDL_MEM_TYPE_INSTRUCTION) - { - ixNpeDlNpeMgrStats.instructionBlocksLoaded++; - } - else if (npeMemType == IX_NPEDL_MEM_TYPE_DATA) - { - ixNpeDlNpeMgrStats.dataBlocksLoaded++; - } - } - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrMemLoad : status = %d\n", status); - return status; -} - - -/* - * Function definition: ixNpeDlNpeMgrStateInfoLoad - */ -PRIVATE IX_STATUS -ixNpeDlNpeMgrStateInfoLoad ( - UINT32 npeBaseAddress, - IxNpeDlNpeMgrStateInfoBlock *blockPtr, - BOOL verify) -{ - UINT32 blockSize; - UINT32 ctxtRegAddrInfo; - UINT32 ctxtRegVal; - IxNpeDlCtxtRegNum ctxtReg; /* identifies Context Store reg (0-3) */ - UINT32 ctxtNum; /* identifies Context number (0-16) */ - UINT32 i; - IX_STATUS status = IX_SUCCESS; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrStateInfoLoad\n"); - - /* block size contains number of words of state-info in block */ - blockSize = blockPtr->size; - - ixNpeDlNpeMgrDebugInstructionPreExec (npeBaseAddress); - - /* for each state-info context register entry in block */ - for (i = 0; i < (blockSize/IX_NPEDL_STATE_INFO_ENTRY_SIZE); i++) - { - /* each state-info entry is 2 words (address, value) in length */ - ctxtRegAddrInfo = (blockPtr->ctxtRegEntry[i]).addressInfo; - ctxtRegVal = (blockPtr->ctxtRegEntry[i]).value; - - ctxtReg = (ctxtRegAddrInfo & IX_NPEDL_MASK_STATE_ADDR_CTXT_REG); - ctxtNum = (ctxtRegAddrInfo & IX_NPEDL_MASK_STATE_ADDR_CTXT_NUM) >> - IX_NPEDL_OFFSET_STATE_ADDR_CTXT_NUM; - - /* error-check Context Register No. and Context Number values */ - /* NOTE that there is no STEVT register for Context 0 */ - if ((ctxtReg < 0) || - (ctxtReg >= IX_NPEDL_CTXT_REG_MAX) || - (ctxtNum > IX_NPEDL_CTXT_NUM_MAX) || - ((ctxtNum == 0) && (ctxtReg == IX_NPEDL_CTXT_REG_STEVT))) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrStateInfoLoad: " - "invalid Context Register Address\n"); - status = IX_NPEDL_CRITICAL_MICROCODE_ERR; - ixNpeDlNpeMgrStats.criticalMicrocodeErrors++; - break; /* abort download */ - } - - status = ixNpeDlNpeMgrCtxtRegWrite (npeBaseAddress, ctxtNum, ctxtReg, - ctxtRegVal, verify); - if (status != IX_SUCCESS) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrStateInfoLoad: " - "write of state-info to NPE failed\n"); - status = IX_NPEDL_CRITICAL_NPE_ERR; - ixNpeDlNpeMgrStats.criticalNpeErrors++; - break; /* abort download */ - } - }/* loop: for each context reg entry in State Info block */ - - ixNpeDlNpeMgrDebugInstructionPostExec (npeBaseAddress); - - if (status == IX_SUCCESS) - { - ixNpeDlNpeMgrStats.stateInfoBlocksLoaded++; - } - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrStateInfoLoad : status = %d\n", - status); - return status; -} - - -/* - * Function definition: ixNpeDlNpeMgrNpeReset - */ -IX_STATUS -ixNpeDlNpeMgrNpeReset ( - IxNpeDlNpeId npeId) -{ - UINT32 npeBaseAddress; - IxNpeDlCtxtRegNum ctxtReg; /* identifies Context Store reg (0-3) */ - UINT32 ctxtNum; /* identifies Context number (0-16) */ - UINT32 regAddr; - UINT32 regVal; - UINT32 localIndex; - UINT32 indexMax; - IX_STATUS status = IX_SUCCESS; - IxFeatureCtrlReg unitFuseReg; - UINT32 ixNpeConfigCtrlRegVal; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrNpeReset\n"); - - /* get base memory address of NPE from npeId */ - npeBaseAddress = ixNpeDlNpeMgrBaseAddressGet (npeId); - - /* pre-store the NPE Config Control Register Value */ - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_CTL, &ixNpeConfigCtrlRegVal); - - ixNpeConfigCtrlRegVal |= 0x3F000000; - - /* disable the parity interrupt */ - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_CTL, (ixNpeConfigCtrlRegVal & IX_NPEDL_PARITY_BIT_MASK)); - - ixNpeDlNpeMgrDebugInstructionPreExec (npeBaseAddress); - - /* - * clear the FIFOs - */ - while (ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress, - IX_NPEDL_REG_OFFSET_WFIFO, - IX_NPEDL_MASK_WFIFO_VALID)) - { - /* read from the Watch-point FIFO until empty */ - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WFIFO, - ®Val); - } - - while (ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress, - IX_NPEDL_REG_OFFSET_STAT, - IX_NPEDL_MASK_STAT_OFNE)) - { - /* read from the outFIFO until empty */ - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_FIFO, - ®Val); - } - - while (ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress, - IX_NPEDL_REG_OFFSET_STAT, - IX_NPEDL_MASK_STAT_IFNE)) - { - /* - * step execution of the NPE intruction to read inFIFO using - * the Debug Executing Context stack - */ - status = ixNpeDlNpeMgrDebugInstructionExec (npeBaseAddress, - IX_NPEDL_INSTR_RD_FIFO, 0, 0); - - if (IX_SUCCESS != status) - { - return status; - } - - } - - /* - * Reset the mailbox reg - */ - /* ...from XScale side */ - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_MBST, - IX_NPEDL_REG_RESET_MBST); - /* ...from NPE side */ - status = ixNpeDlNpeMgrDebugInstructionExec (npeBaseAddress, - IX_NPEDL_INSTR_RESET_MBOX, 0, 0); - - if (IX_SUCCESS != status) - { - return status; - } - - /* - * Reset the physical registers in the NPE register file: - * Note: no need to save/restore REGMAP for Context 0 here - * since all Context Store regs are reset in subsequent code - */ - for (regAddr = 0; - (regAddr < IX_NPEDL_TOTAL_NUM_PHYS_REG) && (status != IX_FAIL); - regAddr++) - { - /* for each physical register in the NPE reg file, write 0 : */ - status = ixNpeDlNpeMgrPhysicalRegWrite (npeBaseAddress, regAddr, - 0, true); - if (status != IX_SUCCESS) - { - return status; /* abort reset */ - } - } - - - /* - * Reset the context store: - */ - for (ctxtNum = IX_NPEDL_CTXT_NUM_MIN; - ctxtNum <= IX_NPEDL_CTXT_NUM_MAX; ctxtNum++) - { - /* set each context's Context Store registers to reset values: */ - for (ctxtReg = 0; ctxtReg < IX_NPEDL_CTXT_REG_MAX; ctxtReg++) - { - /* NOTE that there is no STEVT register for Context 0 */ - if (!((ctxtNum == 0) && (ctxtReg == IX_NPEDL_CTXT_REG_STEVT))) - { - regVal = ixNpeDlCtxtRegResetValues[ctxtReg]; - status = ixNpeDlNpeMgrCtxtRegWrite (npeBaseAddress, ctxtNum, - ctxtReg, regVal, true); - if (status != IX_SUCCESS) - { - return status; /* abort reset */ - } - } - } - } - - ixNpeDlNpeMgrDebugInstructionPostExec (npeBaseAddress); - - /* write Reset values to Execution Context Stack registers */ - indexMax = sizeof (ixNpeDlEcsRegResetValues) / - sizeof (IxNpeDlEcsRegResetValue); - for (localIndex = 0; localIndex < indexMax; localIndex++) - { - regAddr = ixNpeDlEcsRegResetValues[localIndex].regAddr; - regVal = ixNpeDlEcsRegResetValues[localIndex].regResetVal; - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, regAddr, regVal); - } - - /* clear the profile counter */ - ixNpeDlNpeMgrCommandIssue (npeBaseAddress, - IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT); - - /* clear registers EXCT, AP0, AP1, AP2 and AP3 */ - for (regAddr = IX_NPEDL_REG_OFFSET_EXCT; - regAddr <= IX_NPEDL_REG_OFFSET_AP3; - regAddr += IX_NPEDL_BYTES_PER_WORD) - { - IX_NPEDL_REG_WRITE (npeBaseAddress, regAddr, 0); - } - - /* Reset the Watch-count register */ - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC, 0); - - /* - * WR IXA00055043 - Remove IMEM Parity Introduced by NPE Reset Operation - */ - - /* - * Call the feature control API to fused out and reset the NPE and its - * coprocessor - to reset internal states and remove parity error - */ - unitFuseReg = ixFeatureCtrlRead (); - unitFuseReg |= (IX_NPEDL_RESET_NPE_PARITY << npeId); - ixFeatureCtrlWrite (unitFuseReg); - - /* call the feature control API to un-fused and un-reset the NPE & COP */ - unitFuseReg &= (~(IX_NPEDL_RESET_NPE_PARITY << npeId)); - ixFeatureCtrlWrite (unitFuseReg); - - /* - * Call NpeMgr function to stop the NPE again after the Feature Control - * has unfused and Un-Reset the NPE and its associated Coprocessors - */ - status = ixNpeDlNpeMgrNpeStop (npeId); - - /* restore NPE configuration bus Control Register - Parity Settings */ - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_CTL, - (ixNpeConfigCtrlRegVal & IX_NPEDL_CONFIG_CTRL_REG_MASK)); - - ixNpeDlNpeMgrStats.npeResets++; - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrNpeReset : status = %d\n", status); - return status; -} - - -/* - * Function definition: ixNpeDlNpeMgrNpeStart - */ -IX_STATUS -ixNpeDlNpeMgrNpeStart ( - IxNpeDlNpeId npeId) -{ - UINT32 npeBaseAddress; - UINT32 ecsRegVal; - BOOL npeRunning; - IX_STATUS status = IX_SUCCESS; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrNpeStart\n"); - - /* get base memory address of NPE from npeId */ - npeBaseAddress = ixNpeDlNpeMgrBaseAddressGet (npeId); - - /* - * ensure only Background Context Stack Level is Active by turning off - * the Active bit in each of the other Executing Context Stack levels - */ - ecsRegVal = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress, - IX_NPEDL_ECS_PRI_1_CTXT_REG_0); - ecsRegVal &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE; - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_PRI_1_CTXT_REG_0, - ecsRegVal); - - ecsRegVal = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress, - IX_NPEDL_ECS_PRI_2_CTXT_REG_0); - ecsRegVal &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE; - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_PRI_2_CTXT_REG_0, - ecsRegVal); - - ecsRegVal = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress, - IX_NPEDL_ECS_DBG_CTXT_REG_0); - ecsRegVal &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE; - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_0, - ecsRegVal); - - /* clear the pipeline */ - ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); - - /* start NPE execution by issuing command through EXCTL register on NPE */ - ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_START); - - /* - * check execution status of NPE to verify NPE Start operation was - * successful - */ - npeRunning = ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress, - IX_NPEDL_REG_OFFSET_EXCTL, - IX_NPEDL_EXCTL_STATUS_RUN); - if (npeRunning) - { - ixNpeDlNpeMgrStats.npeStarts++; - } - else - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrNpeStart: " - "failed to start NPE execution\n"); - status = IX_FAIL; - } - - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrNpeStart : status = %d\n", status); - return status; -} - - -/* - * Function definition: ixNpeDlNpeMgrNpeStop - */ -IX_STATUS -ixNpeDlNpeMgrNpeStop ( - IxNpeDlNpeId npeId) -{ - UINT32 npeBaseAddress; - IX_STATUS status = IX_SUCCESS; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrNpeStop\n"); - - /* get base memory address of NPE from npeId */ - npeBaseAddress = ixNpeDlNpeMgrBaseAddressGet (npeId); - - /* stop NPE execution by issuing command through EXCTL register on NPE */ - ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_STOP); - - /* verify that NPE Stop was successful */ - if (! ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, - IX_NPEDL_EXCTL_STATUS_STOP)) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrNpeStop: " - "failed to stop NPE execution\n"); - status = IX_FAIL; - } - - ixNpeDlNpeMgrStats.npeStops++; - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrNpeStop : status = %d\n", status); - return status; -} - - -/* - * Function definition: ixNpeDlNpeMgrBitsSetCheck - */ -PRIVATE BOOL -ixNpeDlNpeMgrBitsSetCheck ( - UINT32 npeBaseAddress, - UINT32 regOffset, - UINT32 expectedBitsSet) -{ - UINT32 regVal; - IX_NPEDL_REG_READ (npeBaseAddress, regOffset, ®Val); - - return expectedBitsSet == (expectedBitsSet & regVal); -} - - -/* - * Function definition: ixNpeDlNpeMgrStatsShow - */ -void -ixNpeDlNpeMgrStatsShow (void) -{ - ixOsalLog (IX_OSAL_LOG_LVL_USER, - IX_OSAL_LOG_DEV_STDOUT, - "\nixNpeDlNpeMgrStatsShow:\n" - "\tInstruction Blocks loaded: %u\n" - "\tData Blocks loaded: %u\n" - "\tState Information Blocks loaded: %u\n" - "\tCritical NPE errors: %u\n" - "\tCritical Microcode errors: %u\n", - ixNpeDlNpeMgrStats.instructionBlocksLoaded, - ixNpeDlNpeMgrStats.dataBlocksLoaded, - ixNpeDlNpeMgrStats.stateInfoBlocksLoaded, - ixNpeDlNpeMgrStats.criticalNpeErrors, - ixNpeDlNpeMgrStats.criticalMicrocodeErrors, - 0); - - ixOsalLog (IX_OSAL_LOG_LVL_USER, - IX_OSAL_LOG_DEV_STDOUT, - "\tSuccessful NPE Starts: %u\n" - "\tSuccessful NPE Stops: %u\n" - "\tSuccessful NPE Resets: %u\n\n", - ixNpeDlNpeMgrStats.npeStarts, - ixNpeDlNpeMgrStats.npeStops, - ixNpeDlNpeMgrStats.npeResets, - 0,0,0); - - ixNpeDlNpeMgrUtilsStatsShow (); -} - - -/* - * Function definition: ixNpeDlNpeMgrStatsReset - */ -void -ixNpeDlNpeMgrStatsReset (void) -{ - ixNpeDlNpeMgrStats.instructionBlocksLoaded = 0; - ixNpeDlNpeMgrStats.dataBlocksLoaded = 0; - ixNpeDlNpeMgrStats.stateInfoBlocksLoaded = 0; - ixNpeDlNpeMgrStats.criticalNpeErrors = 0; - ixNpeDlNpeMgrStats.criticalMicrocodeErrors = 0; - ixNpeDlNpeMgrStats.npeStarts = 0; - ixNpeDlNpeMgrStats.npeStops = 0; - ixNpeDlNpeMgrStats.npeResets = 0; - - ixNpeDlNpeMgrUtilsStatsReset (); -} diff --git a/drivers/net/npe/IxNpeDlNpeMgrUtils.c b/drivers/net/npe/IxNpeDlNpeMgrUtils.c deleted file mode 100644 index db50d22d1b..0000000000 --- a/drivers/net/npe/IxNpeDlNpeMgrUtils.c +++ /dev/null @@ -1,782 +0,0 @@ -/** - * @file IxNpeDlNpeMgrUtils.c - * - * @author Intel Corporation - * @date 18 February 2002 - * - * @brief This file contains the implementation of the private API for the - * IXP425 NPE Downloader NpeMgr Utils module - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - - -/* - * Put the system defined include files required. - */ -#define IX_NPE_DL_MAX_NUM_OF_RETRIES 1000000 /**< Maximum number of - * retries before - * timeout - */ - -/* - * Put the user defined include files required. - */ -#include "IxOsal.h" -#include "IxNpeDl.h" -#include "IxNpeDlNpeMgrUtils_p.h" -#include "IxNpeDlNpeMgrEcRegisters_p.h" -#include "IxNpeDlMacros_p.h" - -/* - * #defines and macros used in this file. - */ - -/* used to bit-mask a number of bytes */ -#define IX_NPEDL_MASK_LOWER_BYTE_OF_WORD 0x000000FF -#define IX_NPEDL_MASK_LOWER_SHORT_OF_WORD 0x0000FFFF -#define IX_NPEDL_MASK_FULL_WORD 0xFFFFFFFF - -#define IX_NPEDL_BYTES_PER_WORD 4 -#define IX_NPEDL_BYTES_PER_SHORT 2 - -#define IX_NPEDL_REG_SIZE_BYTE 8 -#define IX_NPEDL_REG_SIZE_SHORT 16 -#define IX_NPEDL_REG_SIZE_WORD 32 - -/* - * Introduce extra read cycles after issuing read command to NPE - * so that we read the register after the NPE has updated it - * This is to overcome race condition between XScale and NPE - */ -#define IX_NPEDL_DELAY_READ_CYCLES 2 -/* - * To mask top three MSBs of 32bit word to download into NPE IMEM - */ -#define IX_NPEDL_MASK_UNUSED_IMEM_BITS 0x1FFFFFFF; - - -/* - * typedefs - */ -typedef struct -{ - UINT32 regAddress; - UINT32 regSize; -} IxNpeDlCtxtRegAccessInfo; - -/* module statistics counters */ -typedef struct -{ - UINT32 insMemWrites; - UINT32 insMemWriteFails; - UINT32 dataMemWrites; - UINT32 dataMemWriteFails; - UINT32 ecsRegWrites; - UINT32 ecsRegReads; - UINT32 dbgInstructionExecs; - UINT32 contextRegWrites; - UINT32 physicalRegWrites; - UINT32 nextPcWrites; -} IxNpeDlNpeMgrUtilsStats; - - -/* - * Variable declarations global to this file only. Externs are followed by - * static variables. - */ - -/* - * contains useful address and function pointers to read/write Context Regs, - * eliminating some switch or if-else statements in places - */ -static IxNpeDlCtxtRegAccessInfo ixNpeDlCtxtRegAccInfo[IX_NPEDL_CTXT_REG_MAX] = -{ - { - IX_NPEDL_CTXT_REG_ADDR_STEVT, - IX_NPEDL_REG_SIZE_BYTE - }, - { - IX_NPEDL_CTXT_REG_ADDR_STARTPC, - IX_NPEDL_REG_SIZE_SHORT - }, - { - IX_NPEDL_CTXT_REG_ADDR_REGMAP, - IX_NPEDL_REG_SIZE_SHORT - }, - { - IX_NPEDL_CTXT_REG_ADDR_CINDEX, - IX_NPEDL_REG_SIZE_BYTE - } -}; - -static UINT32 ixNpeDlSavedExecCount = 0; -static UINT32 ixNpeDlSavedEcsDbgCtxtReg2 = 0; - -static IxNpeDlNpeMgrUtilsStats ixNpeDlNpeMgrUtilsStats; - - -/* - * static function prototypes. - */ -PRIVATE __inline__ void -ixNpeDlNpeMgrWriteCommandIssue (UINT32 npeBaseAddress, UINT32 cmd, - UINT32 addr, UINT32 data); - -PRIVATE __inline__ UINT32 -ixNpeDlNpeMgrReadCommandIssue (UINT32 npeBaseAddress, UINT32 cmd, UINT32 addr); - -PRIVATE IX_STATUS -ixNpeDlNpeMgrLogicalRegRead (UINT32 npeBaseAddress, UINT32 regAddr, - UINT32 regSize, UINT32 ctxtNum, UINT32 *regVal); - -PRIVATE IX_STATUS -ixNpeDlNpeMgrLogicalRegWrite (UINT32 npeBaseAddress, UINT32 regAddr, - UINT32 regVal, UINT32 regSize, - UINT32 ctxtNum, BOOL verify); - -/* - * Function definition: ixNpeDlNpeMgrWriteCommandIssue - */ -PRIVATE __inline__ void -ixNpeDlNpeMgrWriteCommandIssue ( - UINT32 npeBaseAddress, - UINT32 cmd, - UINT32 addr, - UINT32 data) -{ - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, data); - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXAD, addr); - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, cmd); -} - - -/* - * Function definition: ixNpeDlNpeMgrReadCommandIssue - */ -PRIVATE __inline__ UINT32 -ixNpeDlNpeMgrReadCommandIssue ( - UINT32 npeBaseAddress, - UINT32 cmd, - UINT32 addr) -{ - UINT32 data = 0; - int i; - - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXAD, addr); - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, cmd); - for (i = 0; i <= IX_NPEDL_DELAY_READ_CYCLES; i++) - { - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, &data); - } - - return data; -} - -/* - * Function definition: ixNpeDlNpeMgrInsMemWrite - */ -IX_STATUS -ixNpeDlNpeMgrInsMemWrite ( - UINT32 npeBaseAddress, - UINT32 insMemAddress, - UINT32 insMemData, - BOOL verify) -{ - UINT32 insMemDataRtn; - - ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress, - IX_NPEDL_EXCTL_CMD_WR_INS_MEM, - insMemAddress, insMemData); - if (verify) - { - /* write invalid data to this reg, so we can see if we're reading - the EXDATA register too early */ - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, - ~insMemData); - - /*Disabled since top 3 MSB are not used for Azusa hardware Refer WR:IXA00053900*/ - insMemData&=IX_NPEDL_MASK_UNUSED_IMEM_BITS; - - insMemDataRtn=ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress, - IX_NPEDL_EXCTL_CMD_RD_INS_MEM, - insMemAddress); - - insMemDataRtn&=IX_NPEDL_MASK_UNUSED_IMEM_BITS; - - if (insMemData != insMemDataRtn) - { - ixNpeDlNpeMgrUtilsStats.insMemWriteFails++; - return IX_FAIL; - } - } - - ixNpeDlNpeMgrUtilsStats.insMemWrites++; - return IX_SUCCESS; -} - - -/* - * Function definition: ixNpeDlNpeMgrDataMemWrite - */ -IX_STATUS -ixNpeDlNpeMgrDataMemWrite ( - UINT32 npeBaseAddress, - UINT32 dataMemAddress, - UINT32 dataMemData, - BOOL verify) -{ - ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress, - IX_NPEDL_EXCTL_CMD_WR_DATA_MEM, - dataMemAddress, dataMemData); - if (verify) - { - /* write invalid data to this reg, so we can see if we're reading - the EXDATA register too early */ - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, ~dataMemData); - - if (dataMemData != - ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress, - IX_NPEDL_EXCTL_CMD_RD_DATA_MEM, - dataMemAddress)) - { - ixNpeDlNpeMgrUtilsStats.dataMemWriteFails++; - return IX_FAIL; - } - } - - ixNpeDlNpeMgrUtilsStats.dataMemWrites++; - return IX_SUCCESS; -} - - -/* - * Function definition: ixNpeDlNpeMgrExecAccRegWrite - */ -void -ixNpeDlNpeMgrExecAccRegWrite ( - UINT32 npeBaseAddress, - UINT32 regAddress, - UINT32 regData) -{ - ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress, - IX_NPEDL_EXCTL_CMD_WR_ECS_REG, - regAddress, regData); - ixNpeDlNpeMgrUtilsStats.ecsRegWrites++; -} - - -/* - * Function definition: ixNpeDlNpeMgrExecAccRegRead - */ -UINT32 -ixNpeDlNpeMgrExecAccRegRead ( - UINT32 npeBaseAddress, - UINT32 regAddress) -{ - ixNpeDlNpeMgrUtilsStats.ecsRegReads++; - return ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress, - IX_NPEDL_EXCTL_CMD_RD_ECS_REG, - regAddress); -} - - -/* - * Function definition: ixNpeDlNpeMgrCommandIssue - */ -void -ixNpeDlNpeMgrCommandIssue ( - UINT32 npeBaseAddress, - UINT32 command) -{ - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrCommandIssue\n"); - - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, command); - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrCommandIssue\n"); -} - - -/* - * Function definition: ixNpeDlNpeMgrDebugInstructionPreExec - */ -void -ixNpeDlNpeMgrDebugInstructionPreExec( - UINT32 npeBaseAddress) -{ - /* turn off the halt bit by clearing Execution Count register. */ - /* save reg contents 1st and restore later */ - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT, - &ixNpeDlSavedExecCount); - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT, 0); - - /* ensure that IF and IE are on (temporarily), so that we don't end up - * stepping forever */ - ixNpeDlSavedEcsDbgCtxtReg2 = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress, - IX_NPEDL_ECS_DBG_CTXT_REG_2); - - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_2, - (ixNpeDlSavedEcsDbgCtxtReg2 | - IX_NPEDL_MASK_ECS_DBG_REG_2_IF | - IX_NPEDL_MASK_ECS_DBG_REG_2_IE)); -} - - -/* - * Function definition: ixNpeDlNpeMgrDebugInstructionExec - */ -IX_STATUS -ixNpeDlNpeMgrDebugInstructionExec( - UINT32 npeBaseAddress, - UINT32 npeInstruction, - UINT32 ctxtNum, - UINT32 ldur) -{ - UINT32 ecsDbgRegVal; - UINT32 oldWatchcount, newWatchcount; - UINT32 retriesCount = 0; - IX_STATUS status = IX_SUCCESS; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrDebugInstructionExec\n"); - - /* set the Active bit, and the LDUR, in the debug level */ - ecsDbgRegVal = IX_NPEDL_MASK_ECS_REG_0_ACTIVE | - (ldur << IX_NPEDL_OFFSET_ECS_REG_0_LDUR); - - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_0, - ecsDbgRegVal); - - /* - * set CCTXT at ECS DEBUG L3 to specify in which context to execute the - * instruction, and set SELCTXT at ECS DEBUG Level to specify which context - * store to access. - * Debug ECS Level Reg 1 has form 0x000n000n, where n = context number - */ - ecsDbgRegVal = (ctxtNum << IX_NPEDL_OFFSET_ECS_REG_1_CCTXT) | - (ctxtNum << IX_NPEDL_OFFSET_ECS_REG_1_SELCTXT); - - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_1, - ecsDbgRegVal); - - /* clear the pipeline */ - ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); - - /* load NPE instruction into the instruction register */ - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_INSTRUCT_REG, - npeInstruction); - - /* we need this value later to wait for completion of NPE execution step */ - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC, &oldWatchcount); - - /* issue a Step One command via the Execution Control register */ - ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_STEP); - - /* Watch Count register increments when NPE completes an instruction */ - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC, - &newWatchcount); - - /* - * force the XScale to wait until the NPE has finished execution step - * NOTE that this delay will be very small, just long enough to allow a - * single NPE instruction to complete execution; if instruction execution - * is not completed before timeout retries, exit the while loop - */ - while ((IX_NPE_DL_MAX_NUM_OF_RETRIES > retriesCount) - && (newWatchcount == oldWatchcount)) - { - /* Watch Count register increments when NPE completes an instruction */ - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC, - &newWatchcount); - - retriesCount++; - } - - if (IX_NPE_DL_MAX_NUM_OF_RETRIES > retriesCount) - { - ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs++; - } - else - { - /* Return timeout status as the instruction has not been executed - * after maximum retries */ - status = IX_NPEDL_CRITICAL_NPE_ERR; - } - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrDebugInstructionExec\n"); - - return status; -} - - -/* - * Function definition: ixNpeDlNpeMgrDebugInstructionPostExec - */ -void -ixNpeDlNpeMgrDebugInstructionPostExec( - UINT32 npeBaseAddress) -{ - /* clear active bit in debug level */ - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_0, - 0); - - /* clear the pipeline */ - ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); - - /* restore Execution Count register contents. */ - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT, - ixNpeDlSavedExecCount); - - /* restore IF and IE bits to original values */ - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_2, - ixNpeDlSavedEcsDbgCtxtReg2); -} - - -/* - * Function definition: ixNpeDlNpeMgrLogicalRegRead - */ -PRIVATE IX_STATUS -ixNpeDlNpeMgrLogicalRegRead ( - UINT32 npeBaseAddress, - UINT32 regAddr, - UINT32 regSize, - UINT32 ctxtNum, - UINT32 *regVal) -{ - IX_STATUS status = IX_SUCCESS; - UINT32 npeInstruction = 0; - UINT32 mask = 0; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrLogicalRegRead\n"); - - switch (regSize) - { - case IX_NPEDL_REG_SIZE_BYTE: - npeInstruction = IX_NPEDL_INSTR_RD_REG_BYTE; - mask = IX_NPEDL_MASK_LOWER_BYTE_OF_WORD; break; - case IX_NPEDL_REG_SIZE_SHORT: - npeInstruction = IX_NPEDL_INSTR_RD_REG_SHORT; - mask = IX_NPEDL_MASK_LOWER_SHORT_OF_WORD; break; - case IX_NPEDL_REG_SIZE_WORD: - npeInstruction = IX_NPEDL_INSTR_RD_REG_WORD; - mask = IX_NPEDL_MASK_FULL_WORD; break; - } - - /* make regAddr be the SRC and DEST operands (e.g. movX d0, d0) */ - npeInstruction |= (regAddr << IX_NPEDL_OFFSET_INSTR_SRC) | - (regAddr << IX_NPEDL_OFFSET_INSTR_DEST); - - /* step execution of NPE intruction using Debug Executing Context stack */ - status = ixNpeDlNpeMgrDebugInstructionExec (npeBaseAddress, npeInstruction, - ctxtNum, IX_NPEDL_RD_INSTR_LDUR); - - if (IX_SUCCESS != status) - { - return status; - } - - /* read value of register from Execution Data register */ - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, regVal); - - /* align value from left to right */ - *regVal = (*regVal >> (IX_NPEDL_REG_SIZE_WORD - regSize)) & mask; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrLogicalRegRead\n"); - - return IX_SUCCESS; -} - - -/* - * Function definition: ixNpeDlNpeMgrLogicalRegWrite - */ -PRIVATE IX_STATUS -ixNpeDlNpeMgrLogicalRegWrite ( - UINT32 npeBaseAddress, - UINT32 regAddr, - UINT32 regVal, - UINT32 regSize, - UINT32 ctxtNum, - BOOL verify) -{ - UINT32 npeInstruction = 0; - UINT32 mask = 0; - IX_STATUS status = IX_SUCCESS; - UINT32 retRegVal; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrLogicalRegWrite\n"); - - if (regSize == IX_NPEDL_REG_SIZE_WORD) - { - /* NPE register addressing is left-to-right: e.g. |d0|d1|d2|d3| */ - /* Write upper half-word (short) to |d0|d1| */ - status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, regAddr, - regVal >> IX_NPEDL_REG_SIZE_SHORT, - IX_NPEDL_REG_SIZE_SHORT, - ctxtNum, verify); - - if (IX_SUCCESS != status) - { - return status; - } - - /* Write lower half-word (short) to |d2|d3| */ - status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, - regAddr + IX_NPEDL_BYTES_PER_SHORT, - regVal & IX_NPEDL_MASK_LOWER_SHORT_OF_WORD, - IX_NPEDL_REG_SIZE_SHORT, - ctxtNum, verify); - - if (IX_SUCCESS != status) - { - return status; - } - } - else - { - switch (regSize) - { - case IX_NPEDL_REG_SIZE_BYTE: - npeInstruction = IX_NPEDL_INSTR_WR_REG_BYTE; - mask = IX_NPEDL_MASK_LOWER_BYTE_OF_WORD; break; - case IX_NPEDL_REG_SIZE_SHORT: - npeInstruction = IX_NPEDL_INSTR_WR_REG_SHORT; - mask = IX_NPEDL_MASK_LOWER_SHORT_OF_WORD; break; - } - /* mask out any redundant bits, so verify will work later */ - regVal &= mask; - - /* fill dest operand field of instruction with destination reg addr */ - npeInstruction |= (regAddr << IX_NPEDL_OFFSET_INSTR_DEST); - - /* fill src operand field of instruction with least-sig 5 bits of val*/ - npeInstruction |= ((regVal & IX_NPEDL_MASK_IMMED_INSTR_SRC_DATA) << - IX_NPEDL_OFFSET_INSTR_SRC); - - /* fill coprocessor field of instruction with most-sig 11 bits of val*/ - npeInstruction |= ((regVal & IX_NPEDL_MASK_IMMED_INSTR_COPROC_DATA) << - IX_NPEDL_DISPLACE_IMMED_INSTR_COPROC_DATA); - - /* step execution of NPE intruction using Debug ECS */ - status = ixNpeDlNpeMgrDebugInstructionExec(npeBaseAddress, npeInstruction, - ctxtNum, IX_NPEDL_WR_INSTR_LDUR); - - if (IX_SUCCESS != status) - { - return status; - } - }/* condition: if reg to be written is 8-bit or 16-bit (not 32-bit) */ - - if (verify) - { - status = ixNpeDlNpeMgrLogicalRegRead (npeBaseAddress, regAddr, - regSize, ctxtNum, &retRegVal); - - if (IX_SUCCESS == status) - { - if (regVal != retRegVal) - { - status = IX_FAIL; - } - } - } - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrLogicalRegWrite : status = %d\n", - status); - - return status; -} - - -/* - * Function definition: ixNpeDlNpeMgrPhysicalRegWrite - */ -IX_STATUS -ixNpeDlNpeMgrPhysicalRegWrite ( - UINT32 npeBaseAddress, - UINT32 regAddr, - UINT32 regValue, - BOOL verify) -{ - IX_STATUS status; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrPhysicalRegWrite\n"); - -/* - * There are 32 physical registers used in an NPE. These are - * treated as 16 pairs of 32-bit registers. To write one of the pair, - * write the pair number (0-16) to the REGMAP for Context 0. Then write - * the value to register 0 or 4 in the regfile, depending on which - * register of the pair is to be written - */ - - /* - * set REGMAP for context 0 to (regAddr >> 1) to choose which pair (0-16) - * of physical registers to write - */ - status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, - IX_NPEDL_CTXT_REG_ADDR_REGMAP, - (regAddr >> - IX_NPEDL_OFFSET_PHYS_REG_ADDR_REGMAP), - IX_NPEDL_REG_SIZE_SHORT, 0, verify); - if (status == IX_SUCCESS) - { - /* regAddr = 0 or 4 */ - regAddr = (regAddr & IX_NPEDL_MASK_PHYS_REG_ADDR_LOGICAL_ADDR) * - IX_NPEDL_BYTES_PER_WORD; - - status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, regAddr, regValue, - IX_NPEDL_REG_SIZE_WORD, 0, verify); - } - - if (status != IX_SUCCESS) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrPhysicalRegWrite: " - "error writing to physical register\n"); - } - - ixNpeDlNpeMgrUtilsStats.physicalRegWrites++; - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrPhysicalRegWrite : status = %d\n", - status); - return status; -} - - -/* - * Function definition: ixNpeDlNpeMgrCtxtRegWrite - */ -IX_STATUS -ixNpeDlNpeMgrCtxtRegWrite ( - UINT32 npeBaseAddress, - UINT32 ctxtNum, - IxNpeDlCtxtRegNum ctxtReg, - UINT32 ctxtRegVal, - BOOL verify) -{ - UINT32 tempRegVal; - UINT32 ctxtRegAddr; - UINT32 ctxtRegSize; - IX_STATUS status = IX_SUCCESS; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrCtxtRegWrite\n"); - - /* - * Context 0 has no STARTPC. Instead, this value is used to set - * NextPC for Background ECS, to set where NPE starts executing code - */ - if ((ctxtNum == 0) && (ctxtReg == IX_NPEDL_CTXT_REG_STARTPC)) - { - /* read BG_CTXT_REG_0, update NEXTPC bits, and write back to reg */ - tempRegVal = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress, - IX_NPEDL_ECS_BG_CTXT_REG_0); - tempRegVal &= ~IX_NPEDL_MASK_ECS_REG_0_NEXTPC; - tempRegVal |= (ctxtRegVal << IX_NPEDL_OFFSET_ECS_REG_0_NEXTPC) & - IX_NPEDL_MASK_ECS_REG_0_NEXTPC; - - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, - IX_NPEDL_ECS_BG_CTXT_REG_0, tempRegVal); - - ixNpeDlNpeMgrUtilsStats.nextPcWrites++; - } - else - { - ctxtRegAddr = ixNpeDlCtxtRegAccInfo[ctxtReg].regAddress; - ctxtRegSize = ixNpeDlCtxtRegAccInfo[ctxtReg].regSize; - status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, ctxtRegAddr, - ctxtRegVal, ctxtRegSize, - ctxtNum, verify); - if (status != IX_SUCCESS) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrCtxtRegWrite: " - "error writing to context store register\n"); - } - - ixNpeDlNpeMgrUtilsStats.contextRegWrites++; - } - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrCtxtRegWrite : status = %d\n", - status); - - return status; -} - - -/* - * Function definition: ixNpeDlNpeMgrUtilsStatsShow - */ -void -ixNpeDlNpeMgrUtilsStatsShow (void) -{ - ixOsalLog (IX_OSAL_LOG_LVL_USER, - IX_OSAL_LOG_DEV_STDOUT, - "\nixNpeDlNpeMgrUtilsStatsShow:\n" - "\tInstruction Memory writes: %u\n" - "\tInstruction Memory writes failed: %u\n" - "\tData Memory writes: %u\n" - "\tData Memory writes failed: %u\n", - ixNpeDlNpeMgrUtilsStats.insMemWrites, - ixNpeDlNpeMgrUtilsStats.insMemWriteFails, - ixNpeDlNpeMgrUtilsStats.dataMemWrites, - ixNpeDlNpeMgrUtilsStats.dataMemWriteFails, - 0,0); - - ixOsalLog (IX_OSAL_LOG_LVL_USER, - IX_OSAL_LOG_DEV_STDOUT, - "\tExecuting Context Stack Register writes: %u\n" - "\tExecuting Context Stack Register reads: %u\n" - "\tPhysical Register writes: %u\n" - "\tContext Store Register writes: %u\n" - "\tExecution Backgound Context NextPC writes: %u\n" - "\tDebug Instructions Executed: %u\n\n", - ixNpeDlNpeMgrUtilsStats.ecsRegWrites, - ixNpeDlNpeMgrUtilsStats.ecsRegReads, - ixNpeDlNpeMgrUtilsStats.physicalRegWrites, - ixNpeDlNpeMgrUtilsStats.contextRegWrites, - ixNpeDlNpeMgrUtilsStats.nextPcWrites, - ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs); -} - - -/* - * Function definition: ixNpeDlNpeMgrUtilsStatsReset - */ -void -ixNpeDlNpeMgrUtilsStatsReset (void) -{ - ixNpeDlNpeMgrUtilsStats.insMemWrites = 0; - ixNpeDlNpeMgrUtilsStats.insMemWriteFails = 0; - ixNpeDlNpeMgrUtilsStats.dataMemWrites = 0; - ixNpeDlNpeMgrUtilsStats.dataMemWriteFails = 0; - ixNpeDlNpeMgrUtilsStats.ecsRegWrites = 0; - ixNpeDlNpeMgrUtilsStats.ecsRegReads = 0; - ixNpeDlNpeMgrUtilsStats.physicalRegWrites = 0; - ixNpeDlNpeMgrUtilsStats.contextRegWrites = 0; - ixNpeDlNpeMgrUtilsStats.nextPcWrites = 0; - ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs = 0; -} diff --git a/drivers/net/npe/IxNpeMh.c b/drivers/net/npe/IxNpeMh.c deleted file mode 100644 index 5adabd82fc..0000000000 --- a/drivers/net/npe/IxNpeMh.c +++ /dev/null @@ -1,558 +0,0 @@ -/** - * @file IxNpeMh.c - * - * @author Intel Corporation - * @date 18 Jan 2002 - * - * @brief This file contains the implementation of the public API for the - * IXP425 NPE Message Handler component. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/* - * Put the system defined include files required. - */ - -/* - * Put the user defined include files required. - */ - -#include "IxOsal.h" -#include "IxNpeMhMacros_p.h" - -#include "IxNpeMh.h" - -#include "IxNpeMhConfig_p.h" -#include "IxNpeMhReceive_p.h" -#include "IxNpeMhSend_p.h" -#include "IxNpeMhSolicitedCbMgr_p.h" -#include "IxNpeMhUnsolicitedCbMgr_p.h" - -/* - * #defines and macros used in this file. - */ - -/* - * Typedefs whose scope is limited to this file. - */ - -/* - * Variable declarations global to this file only. Externs are followed by - * static variables. - */ - -PRIVATE BOOL ixNpeMhInitialized = false; - -/* - * Extern function prototypes. - */ - -/* - * Static function prototypes. - */ - -/* - * Function definition: ixNpeMhInitialize - */ - -PUBLIC IX_STATUS ixNpeMhInitialize ( - IxNpeMhNpeInterrupts npeInterrupts) -{ - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhInitialize\n"); - - /* check the npeInterrupts parameter */ - if ((npeInterrupts != IX_NPEMH_NPEINTERRUPTS_NO) && - (npeInterrupts != IX_NPEMH_NPEINTERRUPTS_YES)) - { - IX_NPEMH_ERROR_REPORT ("Illegal npeInterrupts parameter value\n"); - return IX_FAIL; - } - - /* parameters are ok ... */ - - /* initialize the Receive module */ - ixNpeMhReceiveInitialize (); - - /* initialize the Solicited Callback Manager module */ - ixNpeMhSolicitedCbMgrInitialize (); - - /* initialize the Unsolicited Callback Manager module */ - ixNpeMhUnsolicitedCbMgrInitialize (); - - /* initialize the Configuration module - * - * NOTE: This module was originally configured before the - * others, but the sequence was changed so that interrupts - * would only be enabled after the handler functions were - * set up. The above modules need to be initialised to - * handle the NPE interrupts. See SCR #2231. - */ - ixNpeMhConfigInitialize (npeInterrupts); - - ixNpeMhInitialized = true; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhInitialize\n"); - - return IX_SUCCESS; -} - -/* - * Function definition: ixNpeMhUnload - */ - -PUBLIC IX_STATUS ixNpeMhUnload (void) -{ - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhUnload\n"); - - if (!ixNpeMhInitialized) - { - return IX_FAIL; - } - - /* Uninitialize the Configuration module */ - ixNpeMhConfigUninit (); - - ixNpeMhInitialized = false; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhUnload\n"); - - return IX_SUCCESS; -} - - -/* - * Function definition: ixNpeMhUnsolicitedCallbackRegister - */ - -PUBLIC IX_STATUS ixNpeMhUnsolicitedCallbackRegister ( - IxNpeMhNpeId npeId, - IxNpeMhMessageId messageId, - IxNpeMhCallback unsolicitedCallback) -{ - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhUnsolicitedCallbackRegister\n"); - - /* check that we are initialized */ - if (!ixNpeMhInitialized) - { - IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n"); - return IX_FAIL; - } - - /* check the npeId parameter */ - if (!ixNpeMhConfigNpeIdIsValid (npeId)) - { - IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n"); - return IX_FAIL; - } - - /* check the messageId parameter */ - if ((messageId < IX_NPEMH_MIN_MESSAGE_ID) - || (messageId > IX_NPEMH_MAX_MESSAGE_ID)) - { - IX_NPEMH_ERROR_REPORT ("Message ID is out of range\n"); - return IX_FAIL; - } - - /* the unsolicitedCallback parameter is allowed to be NULL */ - - /* parameters are ok ... */ - - /* get the lock to prevent other clients from entering */ - ixNpeMhConfigLockGet (npeId); - - /* save the unsolicited callback for the message ID */ - ixNpeMhUnsolicitedCbMgrCallbackSave ( - npeId, messageId, unsolicitedCallback); - - /* release the lock to allow other clients back in */ - ixNpeMhConfigLockRelease (npeId); - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhUnsolicitedCallbackRegister\n"); - - return IX_SUCCESS; -} - -/* - * Function definition: ixNpeMhUnsolicitedCallbackForRangeRegister - */ - -PUBLIC IX_STATUS ixNpeMhUnsolicitedCallbackForRangeRegister ( - IxNpeMhNpeId npeId, - IxNpeMhMessageId minMessageId, - IxNpeMhMessageId maxMessageId, - IxNpeMhCallback unsolicitedCallback) -{ - IxNpeMhMessageId messageId; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhUnsolicitedCallbackForRangeRegister\n"); - - /* check that we are initialized */ - if (!ixNpeMhInitialized) - { - IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n"); - return IX_FAIL; - } - - /* check the npeId parameter */ - if (!ixNpeMhConfigNpeIdIsValid (npeId)) - { - IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n"); - return IX_FAIL; - } - - /* check the minMessageId parameter */ - if ((minMessageId < IX_NPEMH_MIN_MESSAGE_ID) - || (minMessageId > IX_NPEMH_MAX_MESSAGE_ID)) - { - IX_NPEMH_ERROR_REPORT ("Min message ID is out of range\n"); - return IX_FAIL; - } - - /* check the maxMessageId parameter */ - if ((maxMessageId < IX_NPEMH_MIN_MESSAGE_ID) - || (maxMessageId > IX_NPEMH_MAX_MESSAGE_ID)) - { - IX_NPEMH_ERROR_REPORT ("Max message ID is out of range\n"); - return IX_FAIL; - } - - /* check the semantics of the message range parameters */ - if (minMessageId > maxMessageId) - { - IX_NPEMH_ERROR_REPORT ("Min message ID greater than max message " - "ID\n"); - return IX_FAIL; - } - - /* the unsolicitedCallback parameter is allowed to be NULL */ - - /* parameters are ok ... */ - - /* get the lock to prevent other clients from entering */ - ixNpeMhConfigLockGet (npeId); - - /* for each message ID in the range ... */ - for (messageId = minMessageId; messageId <= maxMessageId; messageId++) - { - /* save the unsolicited callback for the message ID */ - ixNpeMhUnsolicitedCbMgrCallbackSave ( - npeId, messageId, unsolicitedCallback); - } - - /* release the lock to allow other clients back in */ - ixNpeMhConfigLockRelease (npeId); - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhUnsolicitedCallbackForRangeRegister\n"); - - return IX_SUCCESS; -} - -/* - * Function definition: ixNpeMhMessageSend - */ - -PUBLIC IX_STATUS ixNpeMhMessageSend ( - IxNpeMhNpeId npeId, - IxNpeMhMessage message, - UINT32 maxSendRetries) -{ - IX_STATUS status = IX_SUCCESS; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhMessageSend\n"); - - /* check that we are initialized */ - if (!ixNpeMhInitialized) - { - IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n"); - return IX_FAIL; - } - - /* check the npeId parameter */ - if (!ixNpeMhConfigNpeIdIsValid (npeId)) - { - IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n"); - return IX_FAIL; - } - - /* parameters are ok ... */ - - /* get the lock to prevent other clients from entering */ - ixNpeMhConfigLockGet (npeId); - - /* send the message */ - status = ixNpeMhSendMessageSend (npeId, message, maxSendRetries); - if (status != IX_SUCCESS) - { - IX_NPEMH_ERROR_REPORT ("Failed to send message\n"); - } - - /* release the lock to allow other clients back in */ - ixNpeMhConfigLockRelease (npeId); - - IX_NPEMH_TRACE1 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhMessageSend" - " : status = %d\n", status); - - return status; -} - -/* - * Function definition: ixNpeMhMessageWithResponseSend - */ - -PUBLIC IX_STATUS ixNpeMhMessageWithResponseSend ( - IxNpeMhNpeId npeId, - IxNpeMhMessage message, - IxNpeMhMessageId solicitedMessageId, - IxNpeMhCallback solicitedCallback, - UINT32 maxSendRetries) -{ - IX_STATUS status = IX_SUCCESS; - IxNpeMhCallback unsolicitedCallback = NULL; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhMessageWithResponseSend\n"); - - /* check that we are initialized */ - if (!ixNpeMhInitialized) - { - IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n"); - return IX_FAIL; - } - - /* the solicitecCallback parameter is allowed to be NULL. this */ - /* signifies the client is not interested in the response message */ - - /* check the npeId parameter */ - if (!ixNpeMhConfigNpeIdIsValid (npeId)) - { - IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n"); - return IX_FAIL; - } - - /* check the solicitedMessageId parameter */ - if ((solicitedMessageId < IX_NPEMH_MIN_MESSAGE_ID) - || (solicitedMessageId > IX_NPEMH_MAX_MESSAGE_ID)) - { - IX_NPEMH_ERROR_REPORT ("Solicited message ID is out of range\n"); - return IX_FAIL; - } - - /* check the solicitedMessageId parameter. if an unsolicited */ - /* callback has been registered for the specified message ID then */ - /* report an error and return failure */ - ixNpeMhUnsolicitedCbMgrCallbackRetrieve ( - npeId, solicitedMessageId, &unsolicitedCallback); - if (unsolicitedCallback != NULL) - { - IX_NPEMH_ERROR_REPORT ("Solicited message ID conflicts with " - "unsolicited message ID\n"); - return IX_FAIL; - } - - /* parameters are ok ... */ - - /* get the lock to prevent other clients from entering */ - ixNpeMhConfigLockGet (npeId); - - /* send the message */ - status = ixNpeMhSendMessageWithResponseSend ( - npeId, message, solicitedMessageId, solicitedCallback, - maxSendRetries); - if (status != IX_SUCCESS) - { - IX_NPEMH_ERROR_REPORT ("Failed to send message\n"); - } - - /* release the lock to allow other clients back in */ - ixNpeMhConfigLockRelease (npeId); - - IX_NPEMH_TRACE1 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhMessageWithResponseSend" - " : status = %d\n", status); - - return status; -} - -/* - * Function definition: ixNpeMhMessagesReceive - */ - -PUBLIC IX_STATUS ixNpeMhMessagesReceive ( - IxNpeMhNpeId npeId) -{ - IX_STATUS status = IX_SUCCESS; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhMessagesReceive\n"); - - /* check that we are initialized */ - if (!ixNpeMhInitialized) - { - IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n"); - return IX_FAIL; - } - - /* check the npeId parameter */ - if (!ixNpeMhConfigNpeIdIsValid (npeId)) - { - IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n"); - return IX_FAIL; - } - - /* parameters are ok ... */ - - /* get the lock to prevent other clients from entering */ - ixNpeMhConfigLockGet (npeId); - - /* receive messages from the NPE */ - status = ixNpeMhReceiveMessagesReceive (npeId); - - if (status != IX_SUCCESS) - { - IX_NPEMH_ERROR_REPORT ("Failed to receive message\n"); - } - - /* release the lock to allow other clients back in */ - ixNpeMhConfigLockRelease (npeId); - - IX_NPEMH_TRACE1 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhMessagesReceive" - " : status = %d\n", status); - - return status; -} - -/* - * Function definition: ixNpeMhShow - */ - -PUBLIC IX_STATUS ixNpeMhShow ( - IxNpeMhNpeId npeId) -{ - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhShow\n"); - - /* check that we are initialized */ - if (!ixNpeMhInitialized) - { - IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n"); - return IX_FAIL; - } - - /* check the npeId parameter */ - if (!ixNpeMhConfigNpeIdIsValid (npeId)) - { - IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n"); - return IX_FAIL; - } - - /* parameters are ok ... */ - - /* note we don't get the lock here as printing the statistics */ - /* to a console may take some time and we don't want to impact */ - /* system performance. this means that the statistics displayed */ - /* may be in a state of flux and make not represent a consistent */ - /* snapshot. */ - - /* display a header */ - ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, - "Current state of NPE ID %d:\n\n", npeId, 0, 0, 0, 0, 0); - - /* show the current state of each module */ - - /* show the current state of the Configuration module */ - ixNpeMhConfigShow (npeId); - - /* show the current state of the Receive module */ - ixNpeMhReceiveShow (npeId); - - /* show the current state of the Send module */ - ixNpeMhSendShow (npeId); - - /* show the current state of the Solicited Callback Manager module */ - ixNpeMhSolicitedCbMgrShow (npeId); - - /* show the current state of the Unsolicited Callback Manager module */ - ixNpeMhUnsolicitedCbMgrShow (npeId); - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhShow\n"); - - return IX_SUCCESS; -} - -/* - * Function definition: ixNpeMhShowReset - */ - -PUBLIC IX_STATUS ixNpeMhShowReset ( - IxNpeMhNpeId npeId) -{ - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhShowReset\n"); - - /* check that we are initialized */ - if (!ixNpeMhInitialized) - { - IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n"); - return IX_FAIL; - } - - /* check the npeId parameter */ - if (!ixNpeMhConfigNpeIdIsValid (npeId)) - { - IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n"); - return IX_FAIL; - } - - /* parameters are ok ... */ - - /* note we don't get the lock here as resetting the statistics */ - /* shouldn't impact system performance. */ - - /* reset the current state of each module */ - - /* reset the current state of the Configuration module */ - ixNpeMhConfigShowReset (npeId); - - /* reset the current state of the Receive module */ - ixNpeMhReceiveShowReset (npeId); - - /* reset the current state of the Send module */ - ixNpeMhSendShowReset (npeId); - - /* reset the current state of the Solicited Callback Manager module */ - ixNpeMhSolicitedCbMgrShowReset (npeId); - - /* reset the current state of the Unsolicited Callback Manager module */ - ixNpeMhUnsolicitedCbMgrShowReset (npeId); - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhShowReset\n"); - - return IX_SUCCESS; -} diff --git a/drivers/net/npe/IxNpeMhConfig.c b/drivers/net/npe/IxNpeMhConfig.c deleted file mode 100644 index eaa9a21ad7..0000000000 --- a/drivers/net/npe/IxNpeMhConfig.c +++ /dev/null @@ -1,584 +0,0 @@ -/** - * @file IxNpeMhConfig.c - * - * @author Intel Corporation - * @date 18 Jan 2002 - * - * @brief This file contains the implementation of the private API for the - * Configuration module. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/* - * Put the system defined include files required. - */ - - -/* - * Put the user defined include files required. - */ - -#include "IxOsal.h" - -#include "IxNpeMhMacros_p.h" - -#include "IxNpeMhConfig_p.h" - -/* - * #defines and macros used in this file. - */ -#define IX_NPE_MH_MAX_NUM_OF_RETRIES 1000000 /**< Maximum number of - * retries before - * timeout - */ - -/* - * Typedefs whose scope is limited to this file. - */ - -/** - * @struct IxNpeMhConfigStats - * - * @brief This structure is used to maintain statistics for the - * Configuration module. - */ - -typedef struct -{ - UINT32 outFifoReads; /**< outFifo reads */ - UINT32 inFifoWrites; /**< inFifo writes */ - UINT32 maxInFifoFullRetries; /**< max retries if inFIFO full */ - UINT32 maxOutFifoEmptyRetries; /**< max retries if outFIFO empty */ -} IxNpeMhConfigStats; - -/* - * Variable declarations global to this file only. Externs are followed by - * static variables. - */ - -IxNpeMhConfigNpeInfo ixNpeMhConfigNpeInfo[IX_NPEMH_NUM_NPES] = -{ - { - 0, - IX_NPEMH_NPEA_INT, - 0, - 0, - 0, - 0, - 0, - NULL, - false - }, - { - 0, - IX_NPEMH_NPEB_INT, - 0, - 0, - 0, - 0, - 0, - NULL, - false - }, - { - 0, - IX_NPEMH_NPEC_INT, - 0, - 0, - 0, - 0, - 0, - NULL, - false - } -}; - -PRIVATE IxNpeMhConfigStats ixNpeMhConfigStats[IX_NPEMH_NUM_NPES]; - -/* - * Extern function prototypes. - */ - -/* - * Static function prototypes. - */ -PRIVATE -void ixNpeMhConfigIsr (void *parameter); - -/* - * Function definition: ixNpeMhConfigIsr - */ - -PRIVATE -void ixNpeMhConfigIsr (void *parameter) -{ - IxNpeMhNpeId npeId = (IxNpeMhNpeId)parameter; - UINT32 ofint; - volatile UINT32 *statusReg = - (UINT32 *)ixNpeMhConfigNpeInfo[npeId].statusRegister; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhConfigIsr\n"); - - /* get the OFINT (OutFifo interrupt) bit of the status register */ - IX_NPEMH_REGISTER_READ_BITS (statusReg, &ofint, IX_NPEMH_NPE_STAT_OFINT); - - /* if the OFINT status bit is set */ - if (ofint) - { - /* if there is an ISR registered for this NPE */ - if (ixNpeMhConfigNpeInfo[npeId].isr != NULL) - { - /* invoke the ISR routine */ - ixNpeMhConfigNpeInfo[npeId].isr (npeId); - } - else - { - /* if we don't service the interrupt the NPE will continue */ - /* to trigger the interrupt indefinitely */ - IX_NPEMH_ERROR_REPORT ("No ISR registered to service " - "interrupt\n"); - } - } - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhConfigIsr\n"); -} - -/* - * Function definition: ixNpeMhConfigInitialize - */ - -void ixNpeMhConfigInitialize ( - IxNpeMhNpeInterrupts npeInterrupts) -{ - IxNpeMhNpeId npeId; - UINT32 virtualAddr[IX_NPEMH_NUM_NPES]; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhConfigInitialize\n"); - - /* Request a mapping for the NPE-A config register address space */ - virtualAddr[IX_NPEMH_NPEID_NPEA] = - (UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEA_BASE, - IX_OSAL_IXP400_NPEA_MAP_SIZE); - IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEA]); - - /* Request a mapping for the NPE-B config register address space */ - virtualAddr[IX_NPEMH_NPEID_NPEB] = - (UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEB_BASE, - IX_OSAL_IXP400_NPEB_MAP_SIZE); - IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEB]); - - /* Request a mapping for the NPE-C config register address space */ - virtualAddr[IX_NPEMH_NPEID_NPEC] = - (UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEC_BASE, - IX_OSAL_IXP400_NPEC_MAP_SIZE); - IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEC]); - - /* for each NPE ... */ - for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++) - { - /* declare a convenience pointer */ - IxNpeMhConfigNpeInfo *npeInfo = &ixNpeMhConfigNpeInfo[npeId]; - - /* store the virtual addresses of the NPE registers for later use */ - npeInfo->virtualRegisterBase = virtualAddr[npeId]; - npeInfo->statusRegister = virtualAddr[npeId] + IX_NPEMH_NPESTAT_OFFSET; - npeInfo->controlRegister = virtualAddr[npeId] + IX_NPEMH_NPECTL_OFFSET; - npeInfo->inFifoRegister = virtualAddr[npeId] + IX_NPEMH_NPEFIFO_OFFSET; - npeInfo->outFifoRegister = virtualAddr[npeId] + IX_NPEMH_NPEFIFO_OFFSET; - - /* for test purposes - to verify the register addresses */ - IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d status register = " - "0x%08X\n", npeId, npeInfo->statusRegister); - IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d control register = " - "0x%08X\n", npeId, npeInfo->controlRegister); - IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d inFifo register = " - "0x%08X\n", npeId, npeInfo->inFifoRegister); - IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d outFifo register = " - "0x%08X\n", npeId, npeInfo->outFifoRegister); - - /* connect our ISR to the NPE interrupt */ - (void) ixOsalIrqBind ( - npeInfo->interruptId, ixNpeMhConfigIsr, (void *)npeId); - - /* initialise a mutex for this NPE */ - (void) ixOsalMutexInit (&npeInfo->mutex); - - /* if we should service the NPE's "outFIFO not empty" interrupt */ - if (npeInterrupts == IX_NPEMH_NPEINTERRUPTS_YES) - { - /* enable the NPE's "outFIFO not empty" interrupt */ - ixNpeMhConfigNpeInterruptEnable (npeId); - } - else - { - /* disable the NPE's "outFIFO not empty" interrupt */ - ixNpeMhConfigNpeInterruptDisable (npeId); - } - } - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhConfigInitialize\n"); -} - -/* - * Function definition: ixNpeMhConfigUninit - */ - -void ixNpeMhConfigUninit (void) -{ - IxNpeMhNpeId npeId; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhConfigUninit\n"); - - /* for each NPE ... */ - for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++) - { - /* declare a convenience pointer */ - IxNpeMhConfigNpeInfo *npeInfo = &ixNpeMhConfigNpeInfo[npeId]; - - /* disconnect ISR */ - ixOsalIrqUnbind(npeInfo->interruptId); - - /* destroy mutex associated with this NPE */ - ixOsalMutexDestroy(&npeInfo->mutex); - - IX_OSAL_MEM_UNMAP (npeInfo->virtualRegisterBase); - - npeInfo->virtualRegisterBase = 0; - npeInfo->statusRegister = 0; - npeInfo->controlRegister = 0; - npeInfo->inFifoRegister = 0; - npeInfo->outFifoRegister = 0; - } - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhConfigUninit\n"); -} - -/* - * Function definition: ixNpeMhConfigIsrRegister - */ - -void ixNpeMhConfigIsrRegister ( - IxNpeMhNpeId npeId, - IxNpeMhConfigIsr isr) -{ - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhConfigIsrRegister\n"); - - /* check if there is already an ISR registered for this NPE */ - if (ixNpeMhConfigNpeInfo[npeId].isr != NULL) - { - IX_NPEMH_TRACE0 (IX_NPEMH_DEBUG, "Over-writing registered NPE ISR\n"); - } - - /* save the ISR routine with the NPE info */ - ixNpeMhConfigNpeInfo[npeId].isr = isr; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhConfigIsrRegister\n"); -} - -/* - * Function definition: ixNpeMhConfigNpeInterruptEnable - */ - -BOOL ixNpeMhConfigNpeInterruptEnable ( - IxNpeMhNpeId npeId) -{ - UINT32 ofe; - volatile UINT32 *controlReg = - (UINT32 *)ixNpeMhConfigNpeInfo[npeId].controlRegister; - - /* get the OFE (OutFifoEnable) bit of the control register */ - IX_NPEMH_REGISTER_READ_BITS (controlReg, &ofe, IX_NPEMH_NPE_CTL_OFE); - - /* if the interrupt is disabled then we must enable it */ - if (!ofe) - { - /* set the OFE (OutFifoEnable) bit of the control register */ - /* we must set the OFEWE (OutFifoEnableWriteEnable) at the same */ - /* time for the write to have effect */ - IX_NPEMH_REGISTER_WRITE_BITS (controlReg, - (IX_NPEMH_NPE_CTL_OFE | - IX_NPEMH_NPE_CTL_OFEWE), - (IX_NPEMH_NPE_CTL_OFE | - IX_NPEMH_NPE_CTL_OFEWE)); - } - - /* return the previous state of the interrupt */ - return (ofe != 0); -} - -/* - * Function definition: ixNpeMhConfigNpeInterruptDisable - */ - -BOOL ixNpeMhConfigNpeInterruptDisable ( - IxNpeMhNpeId npeId) -{ - UINT32 ofe; - volatile UINT32 *controlReg = - (UINT32 *)ixNpeMhConfigNpeInfo[npeId].controlRegister; - - /* get the OFE (OutFifoEnable) bit of the control register */ - IX_NPEMH_REGISTER_READ_BITS (controlReg, &ofe, IX_NPEMH_NPE_CTL_OFE); - - /* if the interrupt is enabled then we must disable it */ - if (ofe) - { - /* unset the OFE (OutFifoEnable) bit of the control register */ - /* we must set the OFEWE (OutFifoEnableWriteEnable) at the same */ - /* time for the write to have effect */ - IX_NPEMH_REGISTER_WRITE_BITS (controlReg, - (0 | - IX_NPEMH_NPE_CTL_OFEWE), - (IX_NPEMH_NPE_CTL_OFE | - IX_NPEMH_NPE_CTL_OFEWE)); - } - - /* return the previous state of the interrupt */ - return (ofe != 0); -} - -/* - * Function definition: ixNpeMhConfigMessageIdGet - */ - -IxNpeMhMessageId ixNpeMhConfigMessageIdGet ( - IxNpeMhMessage message) -{ - /* return the most-significant byte of the first word of the */ - /* message */ - return ((IxNpeMhMessageId) ((message.data[0] >> 24) & 0xFF)); -} - -/* - * Function definition: ixNpeMhConfigNpeIdIsValid - */ - -BOOL ixNpeMhConfigNpeIdIsValid ( - IxNpeMhNpeId npeId) -{ - /* check that the npeId parameter is within the range of valid IDs */ - return (npeId >= 0 && npeId < IX_NPEMH_NUM_NPES); -} - -/* - * Function definition: ixNpeMhConfigLockGet - */ - -void ixNpeMhConfigLockGet ( - IxNpeMhNpeId npeId) -{ - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhConfigLockGet\n"); - - /* lock the mutex for this NPE */ - (void) ixOsalMutexLock (&ixNpeMhConfigNpeInfo[npeId].mutex, - IX_OSAL_WAIT_FOREVER); - - /* disable the NPE's "outFIFO not empty" interrupt */ - ixNpeMhConfigNpeInfo[npeId].oldInterruptState = - ixNpeMhConfigNpeInterruptDisable (npeId); - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhConfigLockGet\n"); -} - -/* - * Function definition: ixNpeMhConfigLockRelease - */ - -void ixNpeMhConfigLockRelease ( - IxNpeMhNpeId npeId) -{ - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhConfigLockRelease\n"); - - /* if the interrupt was previously enabled */ - if (ixNpeMhConfigNpeInfo[npeId].oldInterruptState) - { - /* enable the NPE's "outFIFO not empty" interrupt */ - ixNpeMhConfigNpeInfo[npeId].oldInterruptState = - ixNpeMhConfigNpeInterruptEnable (npeId); - } - - /* unlock the mutex for this NPE */ - (void) ixOsalMutexUnlock (&ixNpeMhConfigNpeInfo[npeId].mutex); - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhConfigLockRelease\n"); -} - -/* - * Function definition: ixNpeMhConfigInFifoWrite - */ - -IX_STATUS ixNpeMhConfigInFifoWrite ( - IxNpeMhNpeId npeId, - IxNpeMhMessage message) -{ - volatile UINT32 *npeInFifo = - (UINT32 *)ixNpeMhConfigNpeInfo[npeId].inFifoRegister; - UINT32 retriesCount = 0; - - /* write the first word of the message to the NPE's inFIFO */ - IX_NPEMH_REGISTER_WRITE (npeInFifo, message.data[0]); - - /* need to wait for room to write second word - see SCR #493, - poll for maximum number of retries, if exceed maximum - retries, exit from while loop */ - while ((IX_NPE_MH_MAX_NUM_OF_RETRIES > retriesCount) - && ixNpeMhConfigInFifoIsFull (npeId)) - { - retriesCount++; - } - - /* Return TIMEOUT status to caller, indicate that NPE Hang / Halt */ - if (IX_NPE_MH_MAX_NUM_OF_RETRIES == retriesCount) - { - return IX_NPEMH_CRITICAL_NPE_ERR; - } - - /* write the second word of the message to the NPE's inFIFO */ - IX_NPEMH_REGISTER_WRITE (npeInFifo, message.data[1]); - - /* record in the stats the maximum number of retries needed */ - if (ixNpeMhConfigStats[npeId].maxInFifoFullRetries < retriesCount) - { - ixNpeMhConfigStats[npeId].maxInFifoFullRetries = retriesCount; - } - - /* update statistical info */ - ixNpeMhConfigStats[npeId].inFifoWrites++; - - return IX_SUCCESS; -} - -/* - * Function definition: ixNpeMhConfigOutFifoRead - */ - -IX_STATUS ixNpeMhConfigOutFifoRead ( - IxNpeMhNpeId npeId, - IxNpeMhMessage *message) -{ - volatile UINT32 *npeOutFifo = - (UINT32 *)ixNpeMhConfigNpeInfo[npeId].outFifoRegister; - UINT32 retriesCount = 0; - - /* read the first word of the message from the NPE's outFIFO */ - IX_NPEMH_REGISTER_READ (npeOutFifo, &message->data[0]); - - /* need to wait for NPE to write second word - see SCR #493 - poll for maximum number of retries, if exceed maximum - retries, exit from while loop */ - while ((IX_NPE_MH_MAX_NUM_OF_RETRIES > retriesCount) - && ixNpeMhConfigOutFifoIsEmpty (npeId)) - { - retriesCount++; - } - - /* Return TIMEOUT status to caller, indicate that NPE Hang / Halt */ - if (IX_NPE_MH_MAX_NUM_OF_RETRIES == retriesCount) - { - return IX_NPEMH_CRITICAL_NPE_ERR; - } - - /* read the second word of the message from the NPE's outFIFO */ - IX_NPEMH_REGISTER_READ (npeOutFifo, &message->data[1]); - - /* record in the stats the maximum number of retries needed */ - if (ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries < retriesCount) - { - ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries = retriesCount; - } - - /* update statistical info */ - ixNpeMhConfigStats[npeId].outFifoReads++; - - return IX_SUCCESS; -} - -/* - * Function definition: ixNpeMhConfigShow - */ - -void ixNpeMhConfigShow ( - IxNpeMhNpeId npeId) -{ - /* show the message fifo read counter */ - IX_NPEMH_SHOW ("Message FIFO reads", - ixNpeMhConfigStats[npeId].outFifoReads); - - /* show the message fifo write counter */ - IX_NPEMH_SHOW ("Message FIFO writes", - ixNpeMhConfigStats[npeId].inFifoWrites); - - /* show the max retries performed when inFIFO full */ - IX_NPEMH_SHOW ("Max inFIFO Full retries", - ixNpeMhConfigStats[npeId].maxInFifoFullRetries); - - /* show the max retries performed when outFIFO empty */ - IX_NPEMH_SHOW ("Max outFIFO Empty retries", - ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries); - - /* show the current status of the inFifo */ - ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, - "InFifo is %s and %s\n", - (ixNpeMhConfigInFifoIsEmpty (npeId) ? - (int) "EMPTY" : (int) "NOT EMPTY"), - (ixNpeMhConfigInFifoIsFull (npeId) ? - (int) "FULL" : (int) "NOT FULL"), - 0, 0, 0, 0); - - /* show the current status of the outFifo */ - ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, - "OutFifo is %s and %s\n", - (ixNpeMhConfigOutFifoIsEmpty (npeId) ? - (int) "EMPTY" : (int) "NOT EMPTY"), - (ixNpeMhConfigOutFifoIsFull (npeId) ? - (int) "FULL" : (int) "NOT FULL"), - 0, 0, 0, 0); -} - -/* - * Function definition: ixNpeMhConfigShowReset - */ - -void ixNpeMhConfigShowReset ( - IxNpeMhNpeId npeId) -{ - /* reset the message fifo read counter */ - ixNpeMhConfigStats[npeId].outFifoReads = 0; - - /* reset the message fifo write counter */ - ixNpeMhConfigStats[npeId].inFifoWrites = 0; - - /* reset the max inFIFO Full retries counter */ - ixNpeMhConfigStats[npeId].maxInFifoFullRetries = 0; - - /* reset the max outFIFO empty retries counter */ - ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries = 0; -} - - diff --git a/drivers/net/npe/IxNpeMhReceive.c b/drivers/net/npe/IxNpeMhReceive.c deleted file mode 100644 index 273c3733f3..0000000000 --- a/drivers/net/npe/IxNpeMhReceive.c +++ /dev/null @@ -1,296 +0,0 @@ -/** - * @file IxNpeMhReceive.c - * - * @author Intel Corporation - * @date 18 Jan 2002 - * - * @brief This file contains the implementation of the private API for the - * Receive module. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/* - * Put the system defined include files required. - */ - - -/* - * Put the user defined include files required. - */ -#include "IxOsal.h" -#include "IxNpeMhMacros_p.h" -#include "IxNpeMhConfig_p.h" -#include "IxNpeMhReceive_p.h" -#include "IxNpeMhSolicitedCbMgr_p.h" -#include "IxNpeMhUnsolicitedCbMgr_p.h" - -/* - * #defines and macros used in this file. - */ - -/* - * Typedefs whose scope is limited to this file. - */ - -/** - * @struct IxNpeMhReceiveStats - * - * @brief This structure is used to maintain statistics for the Receive - * module. - */ - -typedef struct -{ - UINT32 isrs; /**< receive ISR invocations */ - UINT32 receives; /**< receive messages invocations */ - UINT32 messages; /**< messages received */ - UINT32 solicited; /**< solicited messages received */ - UINT32 unsolicited; /**< unsolicited messages received */ - UINT32 callbacks; /**< callbacks invoked */ -} IxNpeMhReceiveStats; - -/* - * Variable declarations global to this file only. Externs are followed by - * static variables. - */ - -PRIVATE IxNpeMhReceiveStats ixNpeMhReceiveStats[IX_NPEMH_NUM_NPES]; - -/* - * Extern function prototypes. - */ - -/* - * Static function prototypes. - */ -PRIVATE -void ixNpeMhReceiveIsr (int npeId); - -PRIVATE -void ixNpeMhReceiveIsr (int npeId) -{ - int lockKey; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhReceiveIsr\n"); - - lockKey = ixOsalIrqLock (); - - /* invoke the message receive routine to get messages from the NPE */ - ixNpeMhReceiveMessagesReceive (npeId); - - /* update statistical info */ - ixNpeMhReceiveStats[npeId].isrs++; - - ixOsalIrqUnlock (lockKey); - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhReceiveIsr\n"); -} - -/* - * Function definition: ixNpeMhReceiveInitialize - */ - -void ixNpeMhReceiveInitialize (void) -{ - IxNpeMhNpeId npeId = 0; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhReceiveInitialize\n"); - - /* for each NPE ... */ - for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++) - { - /* register our internal ISR for the NPE to handle "outFIFO not */ - /* empty" interrupts */ - ixNpeMhConfigIsrRegister (npeId, ixNpeMhReceiveIsr); - } - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhReceiveInitialize\n"); -} - -/* - * Function definition: ixNpeMhReceiveMessagesReceive - */ - -IX_STATUS ixNpeMhReceiveMessagesReceive ( - IxNpeMhNpeId npeId) -{ - IxNpeMhMessage message = { { 0, 0 } }; - IxNpeMhMessageId messageId = 0; - IxNpeMhCallback callback = NULL; - IX_STATUS status; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhReceiveMessagesReceive\n"); - - /* update statistical info */ - ixNpeMhReceiveStats[npeId].receives++; - - /* while the NPE has messages in its outFIFO */ - while (!ixNpeMhConfigOutFifoIsEmpty (npeId)) - { - /* read a message from the NPE's outFIFO */ - status = ixNpeMhConfigOutFifoRead (npeId, &message); - - if (IX_SUCCESS != status) - { - return status; - } - - /* get the ID of the message */ - messageId = ixNpeMhConfigMessageIdGet (message); - - IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, - "Received message from NPE %d with ID 0x%02X\n", - npeId, messageId); - - /* update statistical info */ - ixNpeMhReceiveStats[npeId].messages++; - - /* try to find a matching unsolicited callback for this message. */ - - /* we assume the message is unsolicited. only if there is no */ - /* unsolicited callback for this message type do we assume the */ - /* message is solicited. it is much faster to check for an */ - /* unsolicited callback, so doing this check first should result */ - /* in better performance. */ - - ixNpeMhUnsolicitedCbMgrCallbackRetrieve ( - npeId, messageId, &callback); - - if (callback != NULL) - { - IX_NPEMH_TRACE0 (IX_NPEMH_DEBUG, - "Found matching unsolicited callback\n"); - - /* update statistical info */ - ixNpeMhReceiveStats[npeId].unsolicited++; - } - - /* if no unsolicited callback was found try to find a matching */ - /* solicited callback for this message */ - if (callback == NULL) - { - ixNpeMhSolicitedCbMgrCallbackRetrieve ( - npeId, messageId, &callback); - - if (callback != NULL) - { - IX_NPEMH_TRACE0 (IX_NPEMH_DEBUG, - "Found matching solicited callback\n"); - - /* update statistical info */ - ixNpeMhReceiveStats[npeId].solicited++; - } - } - - /* if a callback (either unsolicited or solicited) was found */ - if (callback != NULL) - { - /* invoke the callback to pass the message back to the client */ - callback (npeId, message); - - /* update statistical info */ - ixNpeMhReceiveStats[npeId].callbacks++; - } - else /* no callback (neither unsolicited nor solicited) was found */ - { - IX_NPEMH_TRACE2 (IX_NPEMH_WARNING, - "No matching callback for NPE %d" - " and ID 0x%02X, discarding message\n", - npeId, messageId); - - /* the message will be discarded. this is normal behaviour */ - /* if the client passes a NULL solicited callback when */ - /* sending a message. this indicates that the client is not */ - /* interested in receiving the response. alternatively a */ - /* NULL callback here may signify an unsolicited message */ - /* with no appropriate registered callback. */ - } - } - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhReceiveMessagesReceive\n"); - - return IX_SUCCESS; -} - -/* - * Function definition: ixNpeMhReceiveShow - */ - -void ixNpeMhReceiveShow ( - IxNpeMhNpeId npeId) -{ - /* show the ISR invocation counter */ - IX_NPEMH_SHOW ("Receive ISR invocations", - ixNpeMhReceiveStats[npeId].isrs); - - /* show the receive message invocation counter */ - IX_NPEMH_SHOW ("Receive messages invocations", - ixNpeMhReceiveStats[npeId].receives); - - /* show the message received counter */ - IX_NPEMH_SHOW ("Messages received", - ixNpeMhReceiveStats[npeId].messages); - - /* show the solicited message counter */ - IX_NPEMH_SHOW ("Solicited messages received", - ixNpeMhReceiveStats[npeId].solicited); - - /* show the unsolicited message counter */ - IX_NPEMH_SHOW ("Unsolicited messages received", - ixNpeMhReceiveStats[npeId].unsolicited); - - /* show the callback invoked counter */ - IX_NPEMH_SHOW ("Callbacks invoked", - ixNpeMhReceiveStats[npeId].callbacks); - - /* show the message discarded counter */ - IX_NPEMH_SHOW ("Received messages discarded", - (ixNpeMhReceiveStats[npeId].messages - - ixNpeMhReceiveStats[npeId].callbacks)); -} - -/* - * Function definition: ixNpeMhReceiveShowReset - */ - -void ixNpeMhReceiveShowReset ( - IxNpeMhNpeId npeId) -{ - /* reset the ISR invocation counter */ - ixNpeMhReceiveStats[npeId].isrs = 0; - - /* reset the receive message invocation counter */ - ixNpeMhReceiveStats[npeId].receives = 0; - - /* reset the message received counter */ - ixNpeMhReceiveStats[npeId].messages = 0; - - /* reset the solicited message counter */ - ixNpeMhReceiveStats[npeId].solicited = 0; - - /* reset the unsolicited message counter */ - ixNpeMhReceiveStats[npeId].unsolicited = 0; - - /* reset the callback invoked counter */ - ixNpeMhReceiveStats[npeId].callbacks = 0; -} diff --git a/drivers/net/npe/IxNpeMhSend.c b/drivers/net/npe/IxNpeMhSend.c deleted file mode 100644 index 8b7038870a..0000000000 --- a/drivers/net/npe/IxNpeMhSend.c +++ /dev/null @@ -1,283 +0,0 @@ -/** - * @file IxNpeMhSend.c - * - * @author Intel Corporation - * @date 18 Jan 2002 - * - * @brief This file contains the implementation of the private API for the - * Send module. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/* - * Put the system defined include files required. - */ - - -/* - * Put the user defined include files required. - */ - -#include "IxNpeMhMacros_p.h" - -#include "IxNpeMhConfig_p.h" -#include "IxNpeMhSend_p.h" -#include "IxNpeMhSolicitedCbMgr_p.h" - -/* - * #defines and macros used in this file. - */ - -/** - * @def IX_NPEMH_INFIFO_RETRY_DELAY_US - * - * @brief Amount of time (uSecs) to delay between retries - * while inFIFO is Full when attempting to send a message - */ -#define IX_NPEMH_INFIFO_RETRY_DELAY_US (1) - - -/* - * Typedefs whose scope is limited to this file. - */ - -/** - * @struct IxNpeMhSendStats - * - * @brief This structure is used to maintain statistics for the Send - * module. - */ - -typedef struct -{ - UINT32 sends; /**< send invocations */ - UINT32 sendWithResponses; /**< send with response invocations */ - UINT32 queueFulls; /**< fifo queue full occurrences */ - UINT32 queueFullRetries; /**< fifo queue full retry occurrences */ - UINT32 maxQueueFullRetries; /**< max fifo queue full retries */ - UINT32 callbackFulls; /**< callback list full occurrences */ -} IxNpeMhSendStats; - -/* - * Variable declarations global to this file only. Externs are followed by - * static variables. - */ - -PRIVATE IxNpeMhSendStats ixNpeMhSendStats[IX_NPEMH_NUM_NPES]; - -/* - * Extern function prototypes. - */ - -/* - * Static function prototypes. - */ -PRIVATE -BOOL ixNpeMhSendInFifoIsFull( - IxNpeMhNpeId npeId, - UINT32 maxSendRetries); - -/* - * Function definition: ixNpeMhSendInFifoIsFull - */ - -PRIVATE -BOOL ixNpeMhSendInFifoIsFull( - IxNpeMhNpeId npeId, - UINT32 maxSendRetries) -{ - BOOL isFull = false; - UINT32 numRetries = 0; - - /* check the NPE's inFIFO */ - isFull = ixNpeMhConfigInFifoIsFull (npeId); - - /* we retry a few times, just to give the NPE a chance to read from */ - /* the FIFO if the FIFO is currently full */ - while (isFull && (numRetries++ < maxSendRetries)) - { - if (numRetries >= IX_NPEMH_SEND_RETRIES_DEFAULT) - { - /* Delay here for as short a time as possible (1 us). */ - /* Adding a delay here should ensure we are not hogging */ - /* the AHB bus while we are retrying */ - ixOsalBusySleep (IX_NPEMH_INFIFO_RETRY_DELAY_US); - } - - /* re-check the NPE's inFIFO */ - isFull = ixNpeMhConfigInFifoIsFull (npeId); - - /* update statistical info */ - ixNpeMhSendStats[npeId].queueFullRetries++; - } - - /* record the highest number of retries that occurred */ - if (ixNpeMhSendStats[npeId].maxQueueFullRetries < numRetries) - { - ixNpeMhSendStats[npeId].maxQueueFullRetries = numRetries; - } - - if (isFull) - { - /* update statistical info */ - ixNpeMhSendStats[npeId].queueFulls++; - } - - return isFull; -} - -/* - * Function definition: ixNpeMhSendMessageSend - */ - -IX_STATUS ixNpeMhSendMessageSend ( - IxNpeMhNpeId npeId, - IxNpeMhMessage message, - UINT32 maxSendRetries) -{ - IX_STATUS status; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhSendMessageSend\n"); - - /* update statistical info */ - ixNpeMhSendStats[npeId].sends++; - - /* check if the NPE's inFIFO is full - if so return an error */ - if (ixNpeMhSendInFifoIsFull (npeId, maxSendRetries)) - { - IX_NPEMH_TRACE0 (IX_NPEMH_WARNING, "NPE's inFIFO is full\n"); - return IX_FAIL; - } - - /* write the message to the NPE's inFIFO */ - status = ixNpeMhConfigInFifoWrite (npeId, message); - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhSendMessageSend\n"); - - return status; -} - -/* - * Function definition: ixNpeMhSendMessageWithResponseSend - */ - -IX_STATUS ixNpeMhSendMessageWithResponseSend ( - IxNpeMhNpeId npeId, - IxNpeMhMessage message, - IxNpeMhMessageId solicitedMessageId, - IxNpeMhCallback solicitedCallback, - UINT32 maxSendRetries) -{ - IX_STATUS status = IX_SUCCESS; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhSendMessageWithResponseSend\n"); - - /* update statistical info */ - ixNpeMhSendStats[npeId].sendWithResponses++; - - /* sr: this sleep will call the receive routine (no interrupts used!!!) */ - ixOsalSleep (IX_NPEMH_INFIFO_RETRY_DELAY_US); - - /* check if the NPE's inFIFO is full - if so return an error */ - if (ixNpeMhSendInFifoIsFull (npeId, maxSendRetries)) - { - IX_NPEMH_TRACE0 (IX_NPEMH_WARNING, "NPE's inFIFO is full\n"); - return IX_FAIL; - } - - /* save the solicited callback */ - status = ixNpeMhSolicitedCbMgrCallbackSave ( - npeId, solicitedMessageId, solicitedCallback); - if (status != IX_SUCCESS) - { - IX_NPEMH_ERROR_REPORT ("Failed to save solicited callback\n"); - - /* update statistical info */ - ixNpeMhSendStats[npeId].callbackFulls++; - - return status; - } - - /* write the message to the NPE's inFIFO */ - status = ixNpeMhConfigInFifoWrite (npeId, message); - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhSendMessageWithResponseSend\n"); - - return status; -} - -/* - * Function definition: ixNpeMhSendShow - */ - -void ixNpeMhSendShow ( - IxNpeMhNpeId npeId) -{ - /* show the message send invocation counter */ - IX_NPEMH_SHOW ("Send invocations", - ixNpeMhSendStats[npeId].sends); - - /* show the message send with response invocation counter */ - IX_NPEMH_SHOW ("Send with response invocations", - ixNpeMhSendStats[npeId].sendWithResponses); - - /* show the fifo queue full occurrence counter */ - IX_NPEMH_SHOW ("Fifo queue full occurrences", - ixNpeMhSendStats[npeId].queueFulls); - - /* show the fifo queue full retry occurrence counter */ - IX_NPEMH_SHOW ("Fifo queue full retry occurrences", - ixNpeMhSendStats[npeId].queueFullRetries); - - /* show the fifo queue full maximum retries counter */ - IX_NPEMH_SHOW ("Maximum fifo queue full retries", - ixNpeMhSendStats[npeId].maxQueueFullRetries); - - /* show the callback list full occurrence counter */ - IX_NPEMH_SHOW ("Solicited callback list full occurrences", - ixNpeMhSendStats[npeId].callbackFulls); -} - -/* - * Function definition: ixNpeMhSendShowReset - */ - -void ixNpeMhSendShowReset ( - IxNpeMhNpeId npeId) -{ - /* reset the message send invocation counter */ - ixNpeMhSendStats[npeId].sends = 0; - - /* reset the message send with response invocation counter */ - ixNpeMhSendStats[npeId].sendWithResponses = 0; - - /* reset the fifo queue full occurrence counter */ - ixNpeMhSendStats[npeId].queueFulls = 0; - - /* reset the fifo queue full retry occurrence counter */ - ixNpeMhSendStats[npeId].queueFullRetries = 0; - - /* reset the max fifo queue full retries counter */ - ixNpeMhSendStats[npeId].maxQueueFullRetries = 0; - - /* reset the callback list full occurrence counter */ - ixNpeMhSendStats[npeId].callbackFulls = 0; -} diff --git a/drivers/net/npe/IxNpeMhSolicitedCbMgr.c b/drivers/net/npe/IxNpeMhSolicitedCbMgr.c deleted file mode 100644 index c539d09071..0000000000 --- a/drivers/net/npe/IxNpeMhSolicitedCbMgr.c +++ /dev/null @@ -1,334 +0,0 @@ -/** - * @file IxNpeMhSolicitedCbMgr.c - * - * @author Intel Corporation - * @date 18 Jan 2002 - * - * @brief This file contains the implementation of the private API for the - * Solicited Callback Manager module. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ -#ifndef IXNPEMHCONFIG_P_H -# define IXNPEMHSOLICITEDCBMGR_C -#else -# error "Error, IxNpeMhConfig_p.h should not be included before this definition." -#endif - -/* - * Put the system defined include files required. - */ - - -/* - * Put the user defined include files required. - */ - -#include "IxOsal.h" - -#include "IxNpeMhMacros_p.h" -#include "IxNpeMhSolicitedCbMgr_p.h" -#include "IxNpeMhConfig_p.h" -/* - * #defines and macros used in this file. - */ - -/* - * Typedefs whose scope is limited to this file. - */ - -/** - * @struct IxNpeMhSolicitedCallbackListEntry - * - * @brief This structure is used to store the information associated with - * an entry in the callback list. This consists of the ID of the send - * message (which indicates the ID of the corresponding response message) - * and the callback function pointer itself. - * - */ - -typedef struct IxNpeMhSolicitedCallbackListEntry -{ - /** message ID */ - IxNpeMhMessageId messageId; - - /** callback function pointer */ - IxNpeMhCallback callback; - - /** pointer to next entry in the list */ - struct IxNpeMhSolicitedCallbackListEntry *next; -} IxNpeMhSolicitedCallbackListEntry; - -/** - * @struct IxNpeMhSolicitedCallbackList - * - * @brief This structure is used to maintain the list of response - * callbacks. The number of entries in this list will be variable, and - * they will be stored in a linked list fashion for ease of addition and - * removal. The entries themselves are statically allocated, and are - * organised into a "free" list and a "callback" list. Adding an entry - * means taking an entry from the "free" list and adding it to the - * "callback" list. Removing an entry means removing it from the - * "callback" list and returning it to the "free" list. - */ - -typedef struct -{ - /** pointer to the head of the free list */ - IxNpeMhSolicitedCallbackListEntry *freeHead; - - /** pointer to the head of the callback list */ - IxNpeMhSolicitedCallbackListEntry *callbackHead; - - /** pointer to the tail of the callback list */ - IxNpeMhSolicitedCallbackListEntry *callbackTail; - - /** array of entries - the first entry is used as a dummy entry to */ - /* avoid the scenario of having an empty list, hence '+ 1' */ - IxNpeMhSolicitedCallbackListEntry entries[IX_NPEMH_MAX_CALLBACKS + 1]; -} IxNpeMhSolicitedCallbackList; - -/** - * @struct IxNpeMhSolicitedCbMgrStats - * - * @brief This structure is used to maintain statistics for the Solicited - * Callback Manager module. - */ - -typedef struct -{ - UINT32 saves; /**< callback list saves */ - UINT32 retrieves; /**< callback list retrieves */ -} IxNpeMhSolicitedCbMgrStats; - -/* - * Variable declarations global to this file only. Externs are followed by - * static variables. - */ - -PRIVATE IxNpeMhSolicitedCallbackList -ixNpeMhSolicitedCbMgrCallbackLists[IX_NPEMH_NUM_NPES]; - -PRIVATE IxNpeMhSolicitedCbMgrStats -ixNpeMhSolicitedCbMgrStats[IX_NPEMH_NUM_NPES]; - -/* - * Extern function prototypes. - */ - -/* - * Static function prototypes. - */ - -/* - * Function definition: ixNpeMhSolicitedCbMgrInitialize - */ - -void ixNpeMhSolicitedCbMgrInitialize (void) -{ - IxNpeMhNpeId npeId; - UINT32 localIndex; - IxNpeMhSolicitedCallbackList *list = NULL; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhSolicitedCbMgrInitialize\n"); - - /* for each NPE ... */ - for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++) - { - /* initialise a pointer to the list for convenience */ - list = &ixNpeMhSolicitedCbMgrCallbackLists[npeId]; - - /* for each entry in the list, after the dummy entry ... */ - for (localIndex = 1; localIndex <= IX_NPEMH_MAX_CALLBACKS; localIndex++) - { - /* initialise the entry */ - list->entries[localIndex].messageId = 0x00; - list->entries[localIndex].callback = NULL; - - /* if this entry is before the last entry */ - if (localIndex < IX_NPEMH_MAX_CALLBACKS) - { - /* chain this entry to the following entry */ - list->entries[localIndex].next = &(list->entries[localIndex + 1]); - } - else /* this entry is the last entry */ - { - /* the last entry isn't chained to anything */ - list->entries[localIndex].next = NULL; - } - } - - /* set the free list pointer to point to the first real entry */ - /* (all real entries begin chained together on the free list) */ - list->freeHead = &(list->entries[1]); - - /* set the callback list pointers to point to the dummy entry */ - /* (the callback list is initially empty) */ - list->callbackHead = &(list->entries[0]); - list->callbackTail = &(list->entries[0]); - } - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhSolicitedCbMgrInitialize\n"); -} - -/* - * Function definition: ixNpeMhSolicitedCbMgrCallbackSave - */ - -IX_STATUS ixNpeMhSolicitedCbMgrCallbackSave ( - IxNpeMhNpeId npeId, - IxNpeMhMessageId solicitedMessageId, - IxNpeMhCallback solicitedCallback) -{ - IxNpeMhSolicitedCallbackList *list = NULL; - IxNpeMhSolicitedCallbackListEntry *callbackEntry = NULL; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhSolicitedCbMgrCallbackSave\n"); - - /* initialise a pointer to the list for convenience */ - list = &ixNpeMhSolicitedCbMgrCallbackLists[npeId]; - - /* check to see if there are any entries in the free list */ - if (list->freeHead == NULL) - { - IX_NPEMH_ERROR_REPORT ("Solicited callback list is full\n"); - return IX_FAIL; - } - - /* there is an entry in the free list we can use */ - - /* update statistical info */ - ixNpeMhSolicitedCbMgrStats[npeId].saves++; - - /* remove a callback entry from the start of the free list */ - callbackEntry = list->freeHead; - list->freeHead = callbackEntry->next; - - /* fill in the callback entry with the new data */ - callbackEntry->messageId = solicitedMessageId; - callbackEntry->callback = solicitedCallback; - - /* the new callback entry will be added to the tail of the callback */ - /* list, so it isn't chained to anything */ - callbackEntry->next = NULL; - - /* chain new callback entry to the last entry of the callback list */ - list->callbackTail->next = callbackEntry; - list->callbackTail = callbackEntry; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhSolicitedCbMgrCallbackSave\n"); - - return IX_SUCCESS; -} - -/* - * Function definition: ixNpeMhSolicitedCbMgrCallbackRetrieve - */ - -void ixNpeMhSolicitedCbMgrCallbackRetrieve ( - IxNpeMhNpeId npeId, - IxNpeMhMessageId solicitedMessageId, - IxNpeMhCallback *solicitedCallback) -{ - IxNpeMhSolicitedCallbackList *list = NULL; - IxNpeMhSolicitedCallbackListEntry *callbackEntry = NULL; - IxNpeMhSolicitedCallbackListEntry *previousEntry = NULL; - - /* initialise a pointer to the list for convenience */ - list = &ixNpeMhSolicitedCbMgrCallbackLists[npeId]; - - /* initialise the callback entry to the first entry of the callback */ - /* list - we must skip over the dummy entry, which is the previous */ - callbackEntry = list->callbackHead->next; - previousEntry = list->callbackHead; - - /* traverse the callback list looking for an entry with a matching */ - /* message ID. note we also save the previous entry's pointer to */ - /* allow us to unchain the matching entry from the callback list */ - while ((callbackEntry != NULL) && - (callbackEntry->messageId != solicitedMessageId)) - { - previousEntry = callbackEntry; - callbackEntry = callbackEntry->next; - } - - /* if we didn't find a matching callback entry */ - if (callbackEntry == NULL) - { - /* return a NULL callback in the outgoing parameter */ - *solicitedCallback = NULL; - } - else /* we found a matching callback entry */ - { - /* update statistical info */ - ixNpeMhSolicitedCbMgrStats[npeId].retrieves++; - - /* return the callback in the outgoing parameter */ - *solicitedCallback = callbackEntry->callback; - - /* unchain callback entry by chaining previous entry to next */ - previousEntry->next = callbackEntry->next; - - /* if the callback entry is at the tail of the list */ - if (list->callbackTail == callbackEntry) - { - /* update the tail of the callback list */ - list->callbackTail = previousEntry; - } - - /* re-initialise the callback entry */ - callbackEntry->messageId = 0x00; - callbackEntry->callback = NULL; - - /* add the callback entry to the start of the free list */ - callbackEntry->next = list->freeHead; - list->freeHead = callbackEntry; - } -} - -/* - * Function definition: ixNpeMhSolicitedCbMgrShow - */ - -void ixNpeMhSolicitedCbMgrShow ( - IxNpeMhNpeId npeId) -{ - /* show the solicited callback list save counter */ - IX_NPEMH_SHOW ("Solicited callback list saves", - ixNpeMhSolicitedCbMgrStats[npeId].saves); - - /* show the solicited callback list retrieve counter */ - IX_NPEMH_SHOW ("Solicited callback list retrieves", - ixNpeMhSolicitedCbMgrStats[npeId].retrieves); -} - -/* - * Function definition: ixNpeMhSolicitedCbMgrShowReset - */ - -void ixNpeMhSolicitedCbMgrShowReset ( - IxNpeMhNpeId npeId) -{ - /* reset the solicited callback list save counter */ - ixNpeMhSolicitedCbMgrStats[npeId].saves = 0; - - /* reset the solicited callback list retrieve counter */ - ixNpeMhSolicitedCbMgrStats[npeId].retrieves = 0; -} diff --git a/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c b/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c deleted file mode 100644 index 082f677e62..0000000000 --- a/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c +++ /dev/null @@ -1,222 +0,0 @@ -/** - * @file IxNpeMhUnsolicitedCbMgr.c - * - * @author Intel Corporation - * @date 18 Jan 2002 - * - * @brief This file contains the implementation of the private API for - * the Unsolicited Callback Manager module. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/* - * Put the system defined include files required. - */ - - -/* - * Put the user defined include files required. - */ -#include "IxOsal.h" - -#include "IxNpeMhMacros_p.h" - -#include "IxNpeMhUnsolicitedCbMgr_p.h" - - -/* - * #defines and macros used in this file. - */ - -/* - * Typedefs whose scope is limited to this file. - */ - -/** - * @struct IxNpeMhUnsolicitedCallbackTable - * - * @brief This structure is used to maintain the list of registered - * callbacks. One entry exists for each message ID, and a NULL entry will - * signify that no callback has been registered for that ID. - */ - -typedef struct -{ - /** array of entries */ - IxNpeMhCallback entries[IX_NPEMH_MAX_MESSAGE_ID + 1]; -} IxNpeMhUnsolicitedCallbackTable; - -/** - * @struct IxNpeMhUnsolicitedCbMgrStats - * - * @brief This structure is used to maintain statistics for the Unsolicited - * Callback Manager module. - */ - -typedef struct -{ - UINT32 saves; /**< callback table saves */ - UINT32 overwrites; /**< callback table overwrites */ -} IxNpeMhUnsolicitedCbMgrStats; - -/* - * Variable declarations global to this file only. Externs are followed by - * static variables. - */ - -PRIVATE IxNpeMhUnsolicitedCallbackTable -ixNpeMhUnsolicitedCallbackTables[IX_NPEMH_NUM_NPES]; - -PRIVATE IxNpeMhUnsolicitedCbMgrStats -ixNpeMhUnsolicitedCbMgrStats[IX_NPEMH_NUM_NPES]; - -/* - * Extern function prototypes. - */ - -/* - * Static function prototypes. - */ - -/* - * Function definition: ixNpeMhUnsolicitedCbMgrInitialize - */ - -void ixNpeMhUnsolicitedCbMgrInitialize (void) -{ - IxNpeMhNpeId npeId = 0; - IxNpeMhUnsolicitedCallbackTable *table = NULL; - IxNpeMhMessageId messageId = 0; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhUnsolicitedCbMgrInitialize\n"); - - /* for each NPE ... */ - for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++) - { - /* initialise a pointer to the table for convenience */ - table = &ixNpeMhUnsolicitedCallbackTables[npeId]; - - /* for each message ID ... */ - for (messageId = IX_NPEMH_MIN_MESSAGE_ID; - messageId <= IX_NPEMH_MAX_MESSAGE_ID; messageId++) - { - /* initialise the callback for this message ID to NULL */ - table->entries[messageId] = NULL; - } - } - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhUnsolicitedCbMgrInitialize\n"); -} - -/* - * Function definition: ixNpeMhUnsolicitedCbMgrCallbackSave - */ - -void ixNpeMhUnsolicitedCbMgrCallbackSave ( - IxNpeMhNpeId npeId, - IxNpeMhMessageId unsolicitedMessageId, - IxNpeMhCallback unsolicitedCallback) -{ - IxNpeMhUnsolicitedCallbackTable *table = NULL; - - /* initialise a pointer to the table for convenience */ - table = &ixNpeMhUnsolicitedCallbackTables[npeId]; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " - "ixNpeMhUnsolicitedCbMgrCallbackSave\n"); - - /* update statistical info */ - ixNpeMhUnsolicitedCbMgrStats[npeId].saves++; - - /* check if there is a callback already registered for this NPE and */ - /* message ID */ - if (table->entries[unsolicitedMessageId] != NULL) - { - /* if we are overwriting an existing callback */ - if (unsolicitedCallback != NULL) - { - IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "Unsolicited callback " - "overwriting existing callback for NPE ID %d " - "message ID 0x%02X\n", npeId, unsolicitedMessageId); - } - else /* if we are clearing an existing callback */ - { - IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NULL unsolicited callback " - "clearing existing callback for NPE ID %d " - "message ID 0x%02X\n", npeId, unsolicitedMessageId); - } - - /* update statistical info */ - ixNpeMhUnsolicitedCbMgrStats[npeId].overwrites++; - } - - /* save the callback into the table */ - table->entries[unsolicitedMessageId] = unsolicitedCallback; - - IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " - "ixNpeMhUnsolicitedCbMgrCallbackSave\n"); -} - -/* - * Function definition: ixNpeMhUnsolicitedCbMgrCallbackRetrieve - */ - -void ixNpeMhUnsolicitedCbMgrCallbackRetrieve ( - IxNpeMhNpeId npeId, - IxNpeMhMessageId unsolicitedMessageId, - IxNpeMhCallback *unsolicitedCallback) -{ - IxNpeMhUnsolicitedCallbackTable *table = NULL; - - /* initialise a pointer to the table for convenience */ - table = &ixNpeMhUnsolicitedCallbackTables[npeId]; - - /* retrieve the callback from the table */ - *unsolicitedCallback = table->entries[unsolicitedMessageId]; -} - -/* - * Function definition: ixNpeMhUnsolicitedCbMgrShow - */ - -void ixNpeMhUnsolicitedCbMgrShow ( - IxNpeMhNpeId npeId) -{ - /* show the unsolicited callback table save counter */ - IX_NPEMH_SHOW ("Unsolicited callback table saves", - ixNpeMhUnsolicitedCbMgrStats[npeId].saves); - - /* show the unsolicited callback table overwrite counter */ - IX_NPEMH_SHOW ("Unsolicited callback table overwrites", - ixNpeMhUnsolicitedCbMgrStats[npeId].overwrites); -} - -/* - * Function definition: ixNpeMhUnsolicitedCbMgrShowReset - */ - -void ixNpeMhUnsolicitedCbMgrShowReset ( - IxNpeMhNpeId npeId) -{ - /* reset the unsolicited callback table save counter */ - ixNpeMhUnsolicitedCbMgrStats[npeId].saves = 0; - - /* reset the unsolicited callback table overwrite counter */ - ixNpeMhUnsolicitedCbMgrStats[npeId].overwrites = 0; -} diff --git a/drivers/net/npe/IxOsalBufferMgt.c b/drivers/net/npe/IxOsalBufferMgt.c deleted file mode 100644 index f70ba05d9e..0000000000 --- a/drivers/net/npe/IxOsalBufferMgt.c +++ /dev/null @@ -1,776 +0,0 @@ -/** - * @file IxOsalBufferMgt.c - * - * @brief Default buffer pool management and buffer management - * Implementation. - * - * Design Notes: - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/* - * OS may choose to use default bufferMgt by defining - * IX_OSAL_USE_DEFAULT_BUFFER_MGT in IxOsalOsBufferMgt.h - */ - -#include "IxOsal.h" - -#define IX_OSAL_BUFFER_FREE_PROTECTION /* Define this to enable Illegal MBuf Freed Protection*/ - -/* - * The implementation is only used when the following - * is defined. - */ -#ifdef IX_OSAL_USE_DEFAULT_BUFFER_MGT - - -#define IX_OSAL_MBUF_SYS_SIGNATURE (0x8BADF00D) -#define IX_OSAL_MBUF_SYS_SIGNATURE_MASK (0xEFFFFFFF) -#define IX_OSAL_MBUF_USED_FLAG (0x10000000) -#define IX_OSAL_MBUF_SYS_SIGNATURE_INIT(bufPtr) IX_OSAL_MBUF_SIGNATURE (bufPtr) = (UINT32)IX_OSAL_MBUF_SYS_SIGNATURE - -/* -* This implementation is protect, the buffer pool management's ixOsalMBufFree -* against an invalid MBUF pointer argument that already has been freed earlier -* or in other words resides in the free pool of MBUFs. This added feature, -* checks the MBUF "USED" FLAG. The Flag tells if the MBUF is still not freed -* back to the Buffer Pool. -* Disable this feature for performance reasons by undef -* IX_OSAL_BUFFER_FREE_PROTECTION macro. -*/ -#ifdef IX_OSAL_BUFFER_FREE_PROTECTION /*IX_OSAL_BUFFER_FREE_PROTECTION With Buffer Free protection*/ - -#define IX_OSAL_MBUF_GET_SYS_SIGNATURE(bufPtr) (IX_OSAL_MBUF_SIGNATURE (bufPtr)&(IX_OSAL_MBUF_SYS_SIGNATURE_MASK) ) -#define IX_OSAL_MBUF_SET_SYS_SIGNATURE(bufPtr) do { \ - IX_OSAL_MBUF_SIGNATURE (bufPtr)&(~IX_OSAL_MBUF_SYS_SIGNATURE_MASK);\ - IX_OSAL_MBUF_SIGNATURE (bufPtr)|=IX_OSAL_MBUF_SYS_SIGNATURE; \ - }while(0) - -#define IX_OSAL_MBUF_SET_USED_FLAG(bufPtr) IX_OSAL_MBUF_SIGNATURE (bufPtr)|=IX_OSAL_MBUF_USED_FLAG -#define IX_OSAL_MBUF_CLEAR_USED_FLAG(bufPtr) IX_OSAL_MBUF_SIGNATURE (bufPtr)&=~IX_OSAL_MBUF_USED_FLAG -#define IX_OSAL_MBUF_ISSET_USED_FLAG(bufPtr) (IX_OSAL_MBUF_SIGNATURE (bufPtr)&IX_OSAL_MBUF_USED_FLAG) - -#else - -#define IX_OSAL_MBUF_GET_SYS_SIGNATURE(bufPtr) IX_OSAL_MBUF_SIGNATURE (bufPtr) -#define IX_OSAL_MBUF_SET_SYS_SIGNATURE(bufPtr) IX_OSAL_MBUF_SIGNATURE (bufPtr) = IX_OSAL_MBUF_SYS_SIGNATURE - -#endif /*IX_OSAL_BUFFER_FREE_PROTECTION With Buffer Free protection*/ -/* - * Variable declarations global to this file only. Externs are followed by - * static variables. - */ - -/* - * A unit of 32, used to provide bit-shift for pool - * management. Needs some work if users want more than 32 pools. - */ -#define IX_OSAL_BUFF_FREE_BITS 32 - -PRIVATE UINT32 ixOsalBuffFreePools[IX_OSAL_MBUF_MAX_POOLS / - IX_OSAL_BUFF_FREE_BITS]; - -PUBLIC IX_OSAL_MBUF_POOL ixOsalBuffPools[IX_OSAL_MBUF_MAX_POOLS]; - -static int ixOsalBuffPoolsInUse = 0; - -#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY -PRIVATE IX_OSAL_MBUF * -ixOsalBuffPoolMbufInit (UINT32 mbufSizeAligned, - UINT32 dataSizeAligned, - IX_OSAL_MBUF_POOL *poolPtr); -#endif - -PRIVATE IX_OSAL_MBUF_POOL * ixOsalPoolAlloc (void); - -/* - * Function definition: ixOsalPoolAlloc - */ - -/****************************/ - -PRIVATE IX_OSAL_MBUF_POOL * -ixOsalPoolAlloc (void) -{ - register unsigned int i = 0; - - /* - * Scan for the first free buffer. Free buffers are indicated by 0 - * on the corrsponding bit in ixOsalBuffFreePools. - */ - if (ixOsalBuffPoolsInUse >= IX_OSAL_MBUF_MAX_POOLS) - { - /* - * Fail to grab a ptr this time - */ - return NULL; - } - - while (ixOsalBuffFreePools[i / IX_OSAL_BUFF_FREE_BITS] & - (1 << (i % IX_OSAL_BUFF_FREE_BITS))) - i++; - /* - * Free buffer found. Mark it as busy and initialize. - */ - ixOsalBuffFreePools[i / IX_OSAL_BUFF_FREE_BITS] |= - (1 << (i % IX_OSAL_BUFF_FREE_BITS)); - - memset (&ixOsalBuffPools[i], 0, sizeof (IX_OSAL_MBUF_POOL)); - - ixOsalBuffPools[i].poolIdx = i; - ixOsalBuffPoolsInUse++; - - return &ixOsalBuffPools[i]; -} - - -#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY -PRIVATE IX_OSAL_MBUF * -ixOsalBuffPoolMbufInit (UINT32 mbufSizeAligned, - UINT32 dataSizeAligned, - IX_OSAL_MBUF_POOL *poolPtr) -{ - UINT8 *dataPtr; - IX_OSAL_MBUF *realMbufPtr; - /* Allocate cache-aligned memory for mbuf header */ - realMbufPtr = (IX_OSAL_MBUF *) IX_OSAL_CACHE_DMA_MALLOC (mbufSizeAligned); - IX_OSAL_ASSERT (realMbufPtr != NULL); - memset (realMbufPtr, 0, mbufSizeAligned); - - /* Allocate cache-aligned memory for mbuf data */ - dataPtr = (UINT8 *) IX_OSAL_CACHE_DMA_MALLOC (dataSizeAligned); - IX_OSAL_ASSERT (dataPtr != NULL); - memset (dataPtr, 0, dataSizeAligned); - - /* Fill in mbuf header fields */ - IX_OSAL_MBUF_MDATA (realMbufPtr) = dataPtr; - IX_OSAL_MBUF_ALLOCATED_BUFF_DATA (realMbufPtr) = (UINT32)dataPtr; - - IX_OSAL_MBUF_MLEN (realMbufPtr) = dataSizeAligned; - IX_OSAL_MBUF_ALLOCATED_BUFF_LEN (realMbufPtr) = dataSizeAligned; - - IX_OSAL_MBUF_NET_POOL (realMbufPtr) = (IX_OSAL_MBUF_POOL *) poolPtr; - - IX_OSAL_MBUF_SYS_SIGNATURE_INIT(realMbufPtr); - - /* update some statistical information */ - poolPtr->mbufMemSize += mbufSizeAligned; - poolPtr->dataMemSize += dataSizeAligned; - - return realMbufPtr; -} -#endif /* #ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY */ - -/* - * Function definition: ixOsalBuffPoolInit - */ - -PUBLIC IX_OSAL_MBUF_POOL * -ixOsalPoolInit (UINT32 count, UINT32 size, const char *name) -{ - - /* These variables are only used if UX_OSAL_BUFFER_ALLOC_SEPERATELY - * is defined . - */ -#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY - UINT32 i, mbufSizeAligned, dataSizeAligned; - IX_OSAL_MBUF *currentMbufPtr = NULL; -#else - void *poolBufPtr; - void *poolDataPtr; - int mbufMemSize; - int dataMemSize; -#endif - - IX_OSAL_MBUF_POOL *poolPtr = NULL; - - if (count <= 0) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalPoolInit(): " "count = 0 \n", 0, 0, 0, 0, 0, 0); - return NULL; - } - - if (name == NULL) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalPoolInit(): " "NULL name \n", 0, 0, 0, 0, 0, 0); - return NULL; - } - - if (strlen (name) > IX_OSAL_MBUF_POOL_NAME_LEN) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalPoolInit(): " - "ERROR - name length should be no greater than %d \n", - IX_OSAL_MBUF_POOL_NAME_LEN, 0, 0, 0, 0, 0); - return NULL; - } - -/* OS can choose whether to allocate all buffers all together (if it - * can handle a huge single alloc request), or to allocate buffers - * separately by the defining IX_OSAL_BUFFER_ALLOC_SEPARATELY. - */ -#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY - /* Get a pool Ptr */ - poolPtr = ixOsalPoolAlloc (); - - if (poolPtr == NULL) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalPoolInit(): " "Fail to Get PoolPtr \n", 0, 0, 0, 0, 0, 0); - return NULL; - } - - mbufSizeAligned = IX_OSAL_MBUF_POOL_SIZE_ALIGN (sizeof (IX_OSAL_MBUF)); - dataSizeAligned = IX_OSAL_MBUF_POOL_SIZE_ALIGN(size); - - poolPtr->nextFreeBuf = NULL; - poolPtr->mbufMemPtr = NULL; - poolPtr->dataMemPtr = NULL; - poolPtr->bufDataSize = dataSizeAligned; - poolPtr->totalBufsInPool = count; - poolPtr->poolAllocType = IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC; - strcpy (poolPtr->name, name); - - - for (i = 0; i < count; i++) - { - /* create an mbuf */ - currentMbufPtr = ixOsalBuffPoolMbufInit (mbufSizeAligned, - dataSizeAligned, - poolPtr); - -#ifdef IX_OSAL_BUFFER_FREE_PROTECTION -/* Set the Buffer USED Flag. If not, ixOsalMBufFree will fail. - ixOsalMbufFree used here is in a special case whereby, it's - used to add MBUF to the Pool. By specification, ixOsalMbufFree - deallocates an allocated MBUF from Pool. -*/ - IX_OSAL_MBUF_SET_USED_FLAG(currentMbufPtr); -#endif - /* Add it to the pool */ - ixOsalMbufFree (currentMbufPtr); - - /* flush the pool information to RAM */ - IX_OSAL_CACHE_FLUSH (currentMbufPtr, mbufSizeAligned); - } - - /* - * update the number of free buffers in the pool - */ - poolPtr->freeBufsInPool = count; - -#else -/* Otherwise allocate buffers in a continuous block fashion */ - poolBufPtr = IX_OSAL_MBUF_POOL_MBUF_AREA_ALLOC (count, mbufMemSize); - IX_OSAL_ASSERT (poolBufPtr != NULL); - poolDataPtr = - IX_OSAL_MBUF_POOL_DATA_AREA_ALLOC (count, size, dataMemSize); - IX_OSAL_ASSERT (poolDataPtr != NULL); - - poolPtr = ixOsalNoAllocPoolInit (poolBufPtr, poolDataPtr, - count, size, name); - if (poolPtr == NULL) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalPoolInit(): " "Fail to get pool ptr \n", 0, 0, 0, 0, 0, 0); - return NULL; - } - - poolPtr->poolAllocType = IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC; - -#endif /* IX_OSAL_BUFFER_ALLOC_SEPARATELY */ - return poolPtr; -} - -PUBLIC IX_OSAL_MBUF_POOL * -ixOsalNoAllocPoolInit (void *poolBufPtr, - void *poolDataPtr, UINT32 count, UINT32 size, const char *name) -{ - UINT32 i, mbufSizeAligned, sizeAligned; - IX_OSAL_MBUF *currentMbufPtr = NULL; - IX_OSAL_MBUF *nextMbufPtr = NULL; - IX_OSAL_MBUF_POOL *poolPtr = NULL; - - /* - * check parameters - */ - if (poolBufPtr == NULL) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalNoAllocPoolInit(): " - "ERROR - NULL poolBufPtr \n", 0, 0, 0, 0, 0, 0); - return NULL; - } - - if (count <= 0) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalNoAllocPoolInit(): " - "ERROR - count must > 0 \n", 0, 0, 0, 0, 0, 0); - return NULL; - } - - if (name == NULL) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalNoAllocPoolInit(): " - "ERROR - NULL name ptr \n", 0, 0, 0, 0, 0, 0); - return NULL; - } - - if (strlen (name) > IX_OSAL_MBUF_POOL_NAME_LEN) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalNoAllocPoolInit(): " - "ERROR - name length should be no greater than %d \n", - IX_OSAL_MBUF_POOL_NAME_LEN, 0, 0, 0, 0, 0); - return NULL; - } - - poolPtr = ixOsalPoolAlloc (); - - if (poolPtr == NULL) - { - return NULL; - } - - /* - * Adjust sizes to ensure alignment on cache line boundaries - */ - mbufSizeAligned = - IX_OSAL_MBUF_POOL_SIZE_ALIGN (sizeof (IX_OSAL_MBUF)); - /* - * clear the mbuf memory area - */ - memset (poolBufPtr, 0, mbufSizeAligned * count); - - if (poolDataPtr != NULL) - { - /* - * Adjust sizes to ensure alignment on cache line boundaries - */ - sizeAligned = IX_OSAL_MBUF_POOL_SIZE_ALIGN (size); - /* - * clear the data memory area - */ - memset (poolDataPtr, 0, sizeAligned * count); - } - else - { - sizeAligned = 0; - } - - /* - * initialise pool fields - */ - strcpy ((poolPtr)->name, name); - - poolPtr->dataMemPtr = poolDataPtr; - poolPtr->mbufMemPtr = poolBufPtr; - poolPtr->bufDataSize = sizeAligned; - poolPtr->totalBufsInPool = count; - poolPtr->mbufMemSize = mbufSizeAligned * count; - poolPtr->dataMemSize = sizeAligned * count; - - currentMbufPtr = (IX_OSAL_MBUF *) poolBufPtr; - - poolPtr->nextFreeBuf = currentMbufPtr; - - for (i = 0; i < count; i++) - { - if (i < (count - 1)) - { - nextMbufPtr = - (IX_OSAL_MBUF *) ((unsigned) currentMbufPtr + - mbufSizeAligned); - } - else - { /* last mbuf in chain */ - nextMbufPtr = NULL; - } - IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (currentMbufPtr) = nextMbufPtr; - IX_OSAL_MBUF_NET_POOL (currentMbufPtr) = poolPtr; - - IX_OSAL_MBUF_SYS_SIGNATURE_INIT(currentMbufPtr); - - if (poolDataPtr != NULL) - { - IX_OSAL_MBUF_MDATA (currentMbufPtr) = poolDataPtr; - IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(currentMbufPtr) = (UINT32) poolDataPtr; - - IX_OSAL_MBUF_MLEN (currentMbufPtr) = sizeAligned; - IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(currentMbufPtr) = sizeAligned; - - poolDataPtr = (void *) ((unsigned) poolDataPtr + sizeAligned); - } - - currentMbufPtr = nextMbufPtr; - } - - /* - * update the number of free buffers in the pool - */ - poolPtr->freeBufsInPool = count; - - poolPtr->poolAllocType = IX_OSAL_MBUF_POOL_TYPE_USER_ALLOC; - - return poolPtr; -} - -/* - * Get a mbuf ptr from the pool - */ -PUBLIC IX_OSAL_MBUF * -ixOsalMbufAlloc (IX_OSAL_MBUF_POOL * poolPtr) -{ - int lock; - IX_OSAL_MBUF *newBufPtr = NULL; - - /* - * check parameters - */ - if (poolPtr == NULL) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalMbufAlloc(): " - "ERROR - Invalid Parameter\n", 0, 0, 0, 0, 0, 0); - return NULL; - } - - lock = ixOsalIrqLock (); - - newBufPtr = poolPtr->nextFreeBuf; - if (newBufPtr) - { - poolPtr->nextFreeBuf = - IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (newBufPtr); - IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (newBufPtr) = NULL; - - /* - * update the number of free buffers in the pool - */ - poolPtr->freeBufsInPool--; - } - else - { - /* Return NULL to indicate to caller that request is denied. */ - ixOsalIrqUnlock (lock); - - return NULL; - } - -#ifdef IX_OSAL_BUFFER_FREE_PROTECTION - /* Set Buffer Used Flag to indicate state.*/ - IX_OSAL_MBUF_SET_USED_FLAG(newBufPtr); -#endif - - ixOsalIrqUnlock (lock); - - return newBufPtr; -} - -PUBLIC IX_OSAL_MBUF * -ixOsalMbufFree (IX_OSAL_MBUF * bufPtr) -{ - int lock; - IX_OSAL_MBUF_POOL *poolPtr; - - IX_OSAL_MBUF *nextBufPtr = NULL; - - /* - * check parameters - */ - if (bufPtr == NULL) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalMbufFree(): " - "ERROR - Invalid Parameter\n", 0, 0, 0, 0, 0, 0); - return NULL; - } - - - - lock = ixOsalIrqLock (); - -#ifdef IX_OSAL_BUFFER_FREE_PROTECTION - - /* Prevention for Buffer freed more than once*/ - if(!IX_OSAL_MBUF_ISSET_USED_FLAG(bufPtr)) - { - return NULL; - } - IX_OSAL_MBUF_CLEAR_USED_FLAG(bufPtr); -#endif - - poolPtr = IX_OSAL_MBUF_NET_POOL (bufPtr); - - /* - * check the mbuf wrapper signature (if mbuf wrapper was used) - */ - if (poolPtr->poolAllocType == IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC) - { - IX_OSAL_ENSURE ( (IX_OSAL_MBUF_GET_SYS_SIGNATURE(bufPtr) == IX_OSAL_MBUF_SYS_SIGNATURE), - "ixOsalBuffPoolBufFree: ERROR - Invalid mbuf signature."); - } - - nextBufPtr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (bufPtr); - - IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (bufPtr) = poolPtr->nextFreeBuf; - poolPtr->nextFreeBuf = bufPtr; - - /* - * update the number of free buffers in the pool - */ - poolPtr->freeBufsInPool++; - - ixOsalIrqUnlock (lock); - - return nextBufPtr; -} - -PUBLIC void -ixOsalMbufChainFree (IX_OSAL_MBUF * bufPtr) -{ - while ((bufPtr = ixOsalMbufFree (bufPtr))); -} - -/* - * Function definition: ixOsalBuffPoolShow - */ -PUBLIC void -ixOsalMbufPoolShow (IX_OSAL_MBUF_POOL * poolPtr) -{ - IX_OSAL_MBUF *nextBufPtr; - int count = 0; - int lock; - - /* - * check parameters - */ - if (poolPtr == NULL) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalBuffPoolShow(): " - "ERROR - Invalid Parameter", 0, 0, 0, 0, 0, 0); - /* - * return IX_FAIL; - */ - return; - } - - lock = ixOsalIrqLock (); - count = poolPtr->freeBufsInPool; - nextBufPtr = poolPtr->nextFreeBuf; - ixOsalIrqUnlock (lock); - - ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, - IX_OSAL_LOG_DEV_STDOUT, "=== POOL INFORMATION ===\n", 0, 0, 0, - 0, 0, 0); - ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, - "Pool Name: %s\n", - (unsigned int) poolPtr->name, 0, 0, 0, 0, 0); - ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, - "Pool Allocation Type: %d\n", - (unsigned int) poolPtr->poolAllocType, 0, 0, 0, 0, 0); - ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, - "Pool Mbuf Mem Usage (bytes): %d\n", - (unsigned int) poolPtr->mbufMemSize, 0, 0, 0, 0, 0); - ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, - "Pool Data Mem Usage (bytes): %d\n", - (unsigned int) poolPtr->dataMemSize, 0, 0, 0, 0, 0); - ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, - "Mbuf Data Capacity (bytes): %d\n", - (unsigned int) poolPtr->bufDataSize, 0, 0, 0, 0, 0); - ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, - "Total Mbufs in Pool: %d\n", - (unsigned int) poolPtr->totalBufsInPool, 0, 0, 0, 0, 0); - ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, - "Available Mbufs: %d\n", (unsigned int) count, 0, - 0, 0, 0, 0); - ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, - "Next Available Mbuf: %p\n", (unsigned int) nextBufPtr, - 0, 0, 0, 0, 0); - - if (poolPtr->poolAllocType == IX_OSAL_MBUF_POOL_TYPE_USER_ALLOC) - { - ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, - IX_OSAL_LOG_DEV_STDOUT, - "Mbuf Mem Area Start address: %p\n", - (unsigned int) poolPtr->mbufMemPtr, 0, 0, 0, 0, 0); - ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, - "Data Mem Area Start address: %p\n", - (unsigned int) poolPtr->dataMemPtr, 0, 0, 0, 0, 0); - } -} - -PUBLIC void -ixOsalMbufDataPtrReset (IX_OSAL_MBUF * bufPtr) -{ - IX_OSAL_MBUF_POOL *poolPtr; - UINT8 *poolDataPtr; - - if (bufPtr == NULL) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT, - "ixOsalBuffPoolBufDataPtrReset" - ": ERROR - Invalid Parameter\n", 0, 0, 0, 0, 0, 0); - return; - } - - poolPtr = (IX_OSAL_MBUF_POOL *) IX_OSAL_MBUF_NET_POOL (bufPtr); - poolDataPtr = poolPtr->dataMemPtr; - - if (poolPtr->poolAllocType == IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC) - { - if (IX_OSAL_MBUF_GET_SYS_SIGNATURE(bufPtr) != IX_OSAL_MBUF_SYS_SIGNATURE) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT, - "ixOsalBuffPoolBufDataPtrReset" - ": invalid mbuf, cannot reset mData pointer\n", 0, 0, - 0, 0, 0, 0); - return; - } - IX_OSAL_MBUF_MDATA (bufPtr) = (UINT8*)IX_OSAL_MBUF_ALLOCATED_BUFF_DATA (bufPtr); - } - else - { - if (poolDataPtr) - { - unsigned int bufSize = poolPtr->bufDataSize; - unsigned int bufDataAddr = - (unsigned int) IX_OSAL_MBUF_MDATA (bufPtr); - unsigned int poolDataAddr = (unsigned int) poolDataPtr; - - /* - * the pointer is still pointing somewhere in the mbuf payload. - * This operation moves the pointer to the beginning of the - * mbuf payload - */ - bufDataAddr = ((bufDataAddr - poolDataAddr) / bufSize) * bufSize; - IX_OSAL_MBUF_MDATA (bufPtr) = &poolDataPtr[bufDataAddr]; - } - else - { - ixOsalLog (IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, - "ixOsalBuffPoolBufDataPtrReset" - ": cannot be used if user supplied NULL pointer for pool data area " - "when pool was created\n", 0, 0, 0, 0, 0, 0); - return; - } - } - -} - -/* - * Function definition: ixOsalBuffPoolUninit - */ -PUBLIC IX_STATUS -ixOsalBuffPoolUninit (IX_OSAL_MBUF_POOL * pool) -{ - if (!pool) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT, - "ixOsalBuffPoolUninit: NULL ptr \n", 0, 0, 0, 0, 0, 0); - return IX_FAIL; - } - - if (pool->freeBufsInPool != pool->totalBufsInPool) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT, - "ixOsalBuffPoolUninit: need to return all ptrs to the pool first! \n", - 0, 0, 0, 0, 0, 0); - return IX_FAIL; - } - - if (pool->poolAllocType == IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC) - { -#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY - UINT32 i; - IX_OSAL_MBUF* pBuf; - - pBuf = pool->nextFreeBuf; - /* Freed the Buffer one by one till all the Memory is freed*/ - for (i= pool->freeBufsInPool; i >0 && pBuf!=NULL ;i--){ - IX_OSAL_MBUF* pBufTemp; - pBufTemp = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(pBuf); - /* Freed MBUF Data Memory area*/ - IX_OSAL_CACHE_DMA_FREE( (void *) (IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(pBuf)) ); - /* Freed MBUF Struct Memory area*/ - IX_OSAL_CACHE_DMA_FREE(pBuf); - pBuf = pBufTemp; - } - -#else - IX_OSAL_CACHE_DMA_FREE (pool->mbufMemPtr); - IX_OSAL_CACHE_DMA_FREE (pool->dataMemPtr); -#endif - } - - ixOsalBuffFreePools[pool->poolIdx / IX_OSAL_BUFF_FREE_BITS] &= - ~(1 << (pool->poolIdx % IX_OSAL_BUFF_FREE_BITS)); - ixOsalBuffPoolsInUse--; - return IX_SUCCESS; -} - -/* - * Function definition: ixOsalBuffPoolDataAreaSizeGet - */ -PUBLIC UINT32 -ixOsalBuffPoolDataAreaSizeGet (int count, int size) -{ - UINT32 memorySize; - memorySize = count * IX_OSAL_MBUF_POOL_SIZE_ALIGN (size); - return memorySize; -} - -/* - * Function definition: ixOsalBuffPoolMbufAreaSizeGet - */ -PUBLIC UINT32 -ixOsalBuffPoolMbufAreaSizeGet (int count) -{ - UINT32 memorySize; - memorySize = - count * IX_OSAL_MBUF_POOL_SIZE_ALIGN (sizeof (IX_OSAL_MBUF)); - return memorySize; -} - -/* - * Function definition: ixOsalBuffPoolFreeCountGet - */ -PUBLIC UINT32 ixOsalBuffPoolFreeCountGet(IX_OSAL_MBUF_POOL * poolPtr) - -{ - - return poolPtr->freeBufsInPool; - -} - -#endif /* IX_OSAL_USE_DEFAULT_BUFFER_MGT */ diff --git a/drivers/net/npe/IxOsalIoMem.c b/drivers/net/npe/IxOsalIoMem.c deleted file mode 100644 index bf3acdc10c..0000000000 --- a/drivers/net/npe/IxOsalIoMem.c +++ /dev/null @@ -1,307 +0,0 @@ -/** - * @file IxOsalIoMem.c - * - * @brief OS-independent IO/Mem implementation - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/* Access to the global mem map is only allowed in this file */ -#define IxOsalIoMem_C - -#include "IxOsal.h" - -#define SEARCH_PHYSICAL_ADDRESS (1) -#define SEARCH_VIRTUAL_ADDRESS (2) - -/* - * Searches for map using one of the following criteria: - * - * - enough room to include a zone starting with the physical "requestedAddress" of size "size" (for mapping) - * - includes the virtual "requestedAddress" in its virtual address space (already mapped, for unmapping) - * - correct coherency - * - * Returns a pointer to the map or NULL if a suitable map is not found. - */ -PRIVATE IxOsalMemoryMap * -ixOsalMemMapFind (UINT32 requestedAddress, - UINT32 size, UINT32 searchCriteria, UINT32 requestedEndianType) -{ - UINT32 mapIndex; - - UINT32 numMapElements = ARRAY_SIZE(ixOsalGlobalMemoryMap); - - for (mapIndex = 0; mapIndex < numMapElements; mapIndex++) - { - IxOsalMemoryMap *map = &ixOsalGlobalMemoryMap[mapIndex]; - - if (searchCriteria == SEARCH_PHYSICAL_ADDRESS - && requestedAddress >= map->physicalAddress - && (requestedAddress + size) <= (map->physicalAddress + map->size) - && (map->mapEndianType & requestedEndianType) != 0) - { - return map; - } - else if (searchCriteria == SEARCH_VIRTUAL_ADDRESS - && requestedAddress >= map->virtualAddress - && requestedAddress <= (map->virtualAddress + map->size) - && (map->mapEndianType & requestedEndianType) != 0) - { - return map; - } - else if (searchCriteria == SEARCH_PHYSICAL_ADDRESS) - { - ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, - IX_OSAL_LOG_DEV_STDOUT, - "Osal: Checking [phys addr 0x%x:size 0x%x:endianType %d]\n", - map->physicalAddress, map->size, map->mapEndianType, 0, 0, 0); - } - } - - /* - * not found - */ - return NULL; -} - -/* - * This function maps an I/O mapped physical memory zone of the given size - * into a virtual memory zone accessible by the caller and returns a cookie - - * the start address of the virtual memory zone. - * IX_OSAL_MMAP_PHYS_TO_VIRT should NOT therefore be used on the returned - * virtual address. - * The memory zone is to be unmapped using ixOsalMemUnmap once the caller has - * finished using this zone (e.g. on driver unload) using the cookie as - * parameter. - * The IX_OSAL_READ/WRITE_LONG/SHORT macros should be used to read and write - * the mapped memory, adding the necessary offsets to the address cookie. - * - * Note: this function is not to be used directly. Use IX_OSAL_MEM_MAP - * instead. - */ -PUBLIC void * -ixOsalIoMemMap (UINT32 requestedAddress, - UINT32 size, IxOsalMapEndianessType requestedEndianType) -{ - IxOsalMemoryMap *map; - - ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, - IX_OSAL_LOG_DEV_STDOUT, - "OSAL: Mapping [addr 0x%x:size 0x%x:endianType %d]\n", - requestedAddress, size, requestedEndianType, 0, 0, 0); - - if (requestedEndianType == IX_OSAL_LE) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalIoMemMap: Please specify component coherency mode to use MEM functions \n", - 0, 0, 0, 0, 0, 0); - return (NULL); - } - map = ixOsalMemMapFind (requestedAddress, - size, SEARCH_PHYSICAL_ADDRESS, requestedEndianType); - if (map != NULL) - { - UINT32 offset = requestedAddress - map->physicalAddress; - - ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, - IX_OSAL_LOG_DEV_STDOUT, "OSAL: Found map [", 0, 0, 0, 0, 0, 0); - ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, - IX_OSAL_LOG_DEV_STDOUT, map->name, 0, 0, 0, 0, 0, 0); - ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, - IX_OSAL_LOG_DEV_STDOUT, - ":addr 0x%x: virt 0x%x:size 0x%x:ref %d:endianType %d]\n", - map->physicalAddress, map->virtualAddress, - map->size, map->refCount, map->mapEndianType, 0); - - if (map->type == IX_OSAL_DYNAMIC_MAP && map->virtualAddress == 0) - { - if (map->mapFunction != NULL) - { - map->mapFunction (map); - - if (map->virtualAddress == 0) - { - /* - * failed - */ - ixOsalLog (IX_OSAL_LOG_LVL_FATAL, - IX_OSAL_LOG_DEV_STDERR, - "OSAL: Remap failed - [addr 0x%x:size 0x%x:endianType %d]\n", - requestedAddress, size, requestedEndianType, 0, 0, 0); - return NULL; - } - } - else - { - /* - * error, no map function for a dynamic map - */ - ixOsalLog (IX_OSAL_LOG_LVL_FATAL, - IX_OSAL_LOG_DEV_STDERR, - "OSAL: No map function for a dynamic map - " - "[addr 0x%x:size 0x%x:endianType %d]\n", - requestedAddress, size, requestedEndianType, 0, 0, 0); - - return NULL; - } - } - - /* - * increment reference count - */ - map->refCount++; - - return (void *) (map->virtualAddress + offset); - } - - /* - * requested address is not described in the global memory map - */ - ixOsalLog (IX_OSAL_LOG_LVL_FATAL, - IX_OSAL_LOG_DEV_STDERR, - "OSAL: No mapping found - [addr 0x%x:size 0x%x:endianType %d]\n", - requestedAddress, size, requestedEndianType, 0, 0, 0); - return NULL; -} - -/* - * This function unmaps a previously mapped I/O memory zone using - * the cookie obtained in the mapping operation. The memory zone in question - * becomes unavailable to the caller once unmapped and the cookie should be - * discarded. - * - * This function cannot fail if the given parameter is correct and does not - * return a value. - * - * Note: this function is not to be used directly. Use IX_OSAL_MEM_UNMAP - * instead. - */ -PUBLIC void -ixOsalIoMemUnmap (UINT32 requestedAddress, UINT32 endianType) -{ - IxOsalMemoryMap *map; - - if (endianType == IX_OSAL_LE) - { - ixOsalLog (IX_OSAL_LOG_LVL_ERROR, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalIoMemUnmap: Please specify component coherency mode to use MEM functions \n", - 0, 0, 0, 0, 0, 0); - return; - } - - if (requestedAddress == 0) - { - /* - * invalid virtual address - */ - return; - } - - map = - ixOsalMemMapFind (requestedAddress, 0, SEARCH_VIRTUAL_ADDRESS, - endianType); - - if (map != NULL) - { - if (map->refCount > 0) - { - /* - * decrement reference count - */ - map->refCount--; - - if (map->refCount == 0) - { - /* - * no longer used, deallocate - */ - if (map->type == IX_OSAL_DYNAMIC_MAP - && map->unmapFunction != NULL) - { - map->unmapFunction (map); - } - } - } - } - else - { - ixOsalLog (IX_OSAL_LOG_LVL_WARNING, - IX_OSAL_LOG_DEV_STDERR, - "OSAL: ixOsServMemUnmap didn't find the requested map " - "[virt addr 0x%x: endianType %d], ignoring call\n", - requestedAddress, endianType, 0, 0, 0, 0); - } -} - -/* - * This function Converts a virtual address into a physical - * address, including the dynamically mapped memory. - * - * Parameters virtAddr - virtual address to convert - * Return value: corresponding physical address, or NULL - * if there is no physical address addressable - * by the given virtual address - * OS: VxWorks, Linux, WinCE, QNX, eCos - * Reentrant: Yes - * IRQ safe: Yes - */ -PUBLIC UINT32 -ixOsalIoMemVirtToPhys (UINT32 virtualAddress, UINT32 requestedCoherency) -{ - IxOsalMemoryMap *map = - ixOsalMemMapFind (virtualAddress, 0, SEARCH_VIRTUAL_ADDRESS, - requestedCoherency); - - if (map != NULL) - { - return map->physicalAddress + virtualAddress - map->virtualAddress; - } - else - { - return (UINT32) IX_OSAL_MMU_VIRT_TO_PHYS (virtualAddress); - } -} - -/* - * This function Converts a virtual address into a physical - * address, including the dynamically mapped memory. - * - * Parameters virtAddr - virtual address to convert - * Return value: corresponding physical address, or NULL - * if there is no physical address addressable - * by the given virtual address - * OS: VxWorks, Linux, WinCE, QNX, eCos - * Reentrant: Yes - * IRQ safe: Yes - */ -PUBLIC UINT32 -ixOsalIoMemPhysToVirt (UINT32 physicalAddress, UINT32 requestedCoherency) -{ - IxOsalMemoryMap *map = - ixOsalMemMapFind (physicalAddress, 0, SEARCH_PHYSICAL_ADDRESS, - requestedCoherency); - - if (map != NULL) - { - return map->virtualAddress + physicalAddress - map->physicalAddress; - } - else - { - return (UINT32) IX_OSAL_MMU_PHYS_TO_VIRT (physicalAddress); - } -} diff --git a/drivers/net/npe/IxOsalOsCacheMMU.c b/drivers/net/npe/IxOsalOsCacheMMU.c deleted file mode 100644 index 72d22e5882..0000000000 --- a/drivers/net/npe/IxOsalOsCacheMMU.c +++ /dev/null @@ -1,43 +0,0 @@ -/** - * @file IxOsalOsCacheMMU.c (linux) - * - * @brief Cache MemAlloc and MemFree. - * - * - * @par - * IXP400 SW Release version 1.5 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxOsal.h" - -#include - -/* - * Allocate on a cache line boundary (null pointers are - * not affected by this operation). This operation is NOT cache safe. - */ -void * -ixOsalCacheDmaMalloc (UINT32 n) -{ - return malloc(n); -} - -/* - * - */ -void -ixOsalCacheDmaFree (void *ptr) -{ - free(ptr); -} diff --git a/drivers/net/npe/IxOsalOsMsgQ.c b/drivers/net/npe/IxOsalOsMsgQ.c deleted file mode 100644 index 5fe368bdaf..0000000000 --- a/drivers/net/npe/IxOsalOsMsgQ.c +++ /dev/null @@ -1,55 +0,0 @@ -/** - * @file IxOsalOsMsgQ.c (eCos) - * - * @brief OS-specific Message Queue implementation. - * - * - * @par - * IXP400 SW Release version 1.5 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxOsal.h" - -/******************************* - * Public functions - *******************************/ -PUBLIC IX_STATUS -ixOsalMessageQueueCreate (IxOsalMessageQueue * queue, - UINT32 msgCount, UINT32 msgLen) -{ - diag_printf("%s called\n", __FUNCTION__); - return IX_FAIL; -} - -PUBLIC IX_STATUS -ixOsalMessageQueueDelete (IxOsalMessageQueue * queue) -{ - diag_printf("%s called\n", __FUNCTION__); - return IX_FAIL; -} - -PUBLIC IX_STATUS -ixOsalMessageQueueSend (IxOsalMessageQueue * queue, UINT8 * message) -{ - diag_printf("%s called\n", __FUNCTION__); - return IX_FAIL; -} - -PUBLIC IX_STATUS -ixOsalMessageQueueReceive (IxOsalMessageQueue * queue, UINT8 * message) -{ - diag_printf("%s called\n", __FUNCTION__); - return IX_FAIL; -} - diff --git a/drivers/net/npe/IxOsalOsSemaphore.c b/drivers/net/npe/IxOsalOsSemaphore.c deleted file mode 100644 index 33de7f6e42..0000000000 --- a/drivers/net/npe/IxOsalOsSemaphore.c +++ /dev/null @@ -1,209 +0,0 @@ -/** - * @file IxOsalOsSemaphore.c (eCos) - * - * @brief Implementation for semaphore and mutex. - * - * - * @par - * IXP400 SW Release version 1.5 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxOsal.h" -#include "IxNpeMhReceive_p.h" - -/* Define a large number */ -#define IX_OSAL_MAX_LONG (0x7FFFFFFF) - -/* Max timeout in MS, used to guard against possible overflow */ -#define IX_OSAL_MAX_TIMEOUT_MS (IX_OSAL_MAX_LONG/HZ) - - -PUBLIC IX_STATUS -ixOsalSemaphoreInit (IxOsalSemaphore * sid, UINT32 start_value) -{ - diag_printf("%s called\n", __FUNCTION__); - return IX_SUCCESS; -} - -/** - * DESCRIPTION: If the semaphore is 'empty', the calling thread is blocked. - * If the semaphore is 'full', it is taken and control is returned - * to the caller. If the time indicated in 'timeout' is reached, - * the thread will unblock and return an error indication. If the - * timeout is set to 'IX_OSAL_WAIT_NONE', the thread will never block; - * if it is set to 'IX_OSAL_WAIT_FOREVER', the thread will block until - * the semaphore is available. - * - * - */ - - -PUBLIC IX_STATUS -ixOsalSemaphoreWait (IxOsalOsSemaphore * sid, INT32 timeout) -{ - diag_printf("%s called\n", __FUNCTION__); - return IX_SUCCESS; -} - -/* - * Attempt to get semaphore, return immediately, - * no error info because users expect some failures - * when using this API. - */ -PUBLIC IX_STATUS -ixOsalSemaphoreTryWait (IxOsalSemaphore * sid) -{ - diag_printf("%s called\n", __FUNCTION__); - return IX_FAIL; -} - -/** - * - * DESCRIPTION: This function causes the next available thread in the pend queue - * to be unblocked. If no thread is pending on this semaphore, the - * semaphore becomes 'full'. - */ -PUBLIC IX_STATUS -ixOsalSemaphorePost (IxOsalSemaphore * sid) -{ - diag_printf("%s called\n", __FUNCTION__); - return IX_SUCCESS; -} - -PUBLIC IX_STATUS -ixOsalSemaphoreGetValue (IxOsalSemaphore * sid, UINT32 * value) -{ - diag_printf("%s called\n", __FUNCTION__); - return IX_FAIL; -} - -PUBLIC IX_STATUS -ixOsalSemaphoreDestroy (IxOsalSemaphore * sid) -{ - diag_printf("%s called\n", __FUNCTION__); - return IX_FAIL; -} - -/**************************** - * Mutex - ****************************/ - -static void drv_mutex_init(IxOsalMutex *mutex) -{ - *mutex = 0; -} - -static void drv_mutex_destroy(IxOsalMutex *mutex) -{ - *mutex = -1; -} - -static int drv_mutex_trylock(IxOsalMutex *mutex) -{ - int result = true; - - if (*mutex == 1) - result = false; - - return result; -} - -static void drv_mutex_unlock(IxOsalMutex *mutex) -{ - if (*mutex == 1) - printf("Trying to unlock unlocked mutex!"); - - *mutex = 0; -} - -PUBLIC IX_STATUS -ixOsalMutexInit (IxOsalMutex * mutex) -{ - drv_mutex_init(mutex); - return IX_SUCCESS; -} - -PUBLIC IX_STATUS -ixOsalMutexLock (IxOsalMutex * mutex, INT32 timeout) -{ - int tries; - - if (timeout == IX_OSAL_WAIT_NONE) { - if (drv_mutex_trylock(mutex)) - return IX_SUCCESS; - else - return IX_FAIL; - } - - tries = (timeout * 1000) / 50; - while (1) { - if (drv_mutex_trylock(mutex)) - return IX_SUCCESS; - if (timeout != IX_OSAL_WAIT_FOREVER && tries-- <= 0) - break; - udelay(50); - } - return IX_FAIL; -} - -PUBLIC IX_STATUS -ixOsalMutexUnlock (IxOsalMutex * mutex) -{ - drv_mutex_unlock(mutex); - return IX_SUCCESS; -} - -/* - * Attempt to get mutex, return immediately, - * no error info because users expect some failures - * when using this API. - */ -PUBLIC IX_STATUS -ixOsalMutexTryLock (IxOsalMutex * mutex) -{ - if (drv_mutex_trylock(mutex)) - return IX_SUCCESS; - return IX_FAIL; -} - -PUBLIC IX_STATUS -ixOsalMutexDestroy (IxOsalMutex * mutex) -{ - drv_mutex_destroy(mutex); - return IX_SUCCESS; -} - -PUBLIC IX_STATUS -ixOsalFastMutexInit (IxOsalFastMutex * mutex) -{ - return ixOsalMutexInit(mutex); -} - -PUBLIC IX_STATUS ixOsalFastMutexTryLock(IxOsalFastMutex *mutex) -{ - return ixOsalMutexTryLock(mutex); -} - - -PUBLIC IX_STATUS -ixOsalFastMutexUnlock (IxOsalFastMutex * mutex) -{ - return ixOsalMutexUnlock(mutex); -} - -PUBLIC IX_STATUS -ixOsalFastMutexDestroy (IxOsalFastMutex * mutex) -{ - return ixOsalMutexDestroy(mutex); -} diff --git a/drivers/net/npe/IxOsalOsServices.c b/drivers/net/npe/IxOsalOsServices.c deleted file mode 100644 index a9aa36804b..0000000000 --- a/drivers/net/npe/IxOsalOsServices.c +++ /dev/null @@ -1,227 +0,0 @@ -/** - * @file IxOsalOsServices.c (linux) - * - * @brief Implementation for Irq, Mem, sleep. - * - * - * @par - * IXP400 SW Release version 1.5 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include -#include -#include "IxOsal.h" -#include -#include -#include -#include -#include - -static char *traceHeaders[] = { - "", - "[fatal] ", - "[error] ", - "[warning] ", - "[message] ", - "[debug1] ", - "[debug2] ", - "[debug3] ", - "[all]" -}; - -/* by default trace all but debug message */ -PRIVATE int ixOsalCurrLogLevel = IX_OSAL_LOG_LVL_MESSAGE; - -/************************************** - * Irq services - *************************************/ - -PUBLIC IX_STATUS -ixOsalIrqBind (UINT32 vector, IxOsalVoidFnVoidPtr routine, void *parameter) -{ - return IX_FAIL; -} - -PUBLIC IX_STATUS -ixOsalIrqUnbind (UINT32 vector) -{ - return IX_FAIL; -} - -PUBLIC UINT32 -ixOsalIrqLock () -{ - return 0; -} - -/* Enable interrupts and task scheduling, - * input parameter: irqEnable status returned - * by ixOsalIrqLock(). - */ -PUBLIC void -ixOsalIrqUnlock (UINT32 lockKey) -{ -} - -PUBLIC UINT32 -ixOsalIrqLevelSet (UINT32 level) -{ - return IX_FAIL; -} - -PUBLIC void -ixOsalIrqEnable (UINT32 irqLevel) -{ -} - -PUBLIC void -ixOsalIrqDisable (UINT32 irqLevel) -{ -} - -/********************* - * Log function - *********************/ - -INT32 -ixOsalLog (IxOsalLogLevel level, - IxOsalLogDevice device, - char *format, int arg1, int arg2, int arg3, int arg4, int arg5, int arg6) -{ - /* - * Return -1 for custom display devices - */ - if ((device != IX_OSAL_LOG_DEV_STDOUT) - && (device != IX_OSAL_LOG_DEV_STDERR)) - { - debug("ixOsalLog: only IX_OSAL_LOG_DEV_STDOUT and IX_OSAL_LOG_DEV_STDERR are supported \n"); - return (IX_OSAL_LOG_ERROR); - } - - if (level <= ixOsalCurrLogLevel && level != IX_OSAL_LOG_LVL_NONE) - { -#if 0 /* sr: U-Boots printf or debug doesn't return a length */ - int headerByteCount = (level == IX_OSAL_LOG_LVL_USER) ? 0 : diag_printf(traceHeaders[level - 1]); - - return headerByteCount + diag_printf (format, arg1, arg2, arg3, arg4, arg5, arg6); -#else - int headerByteCount = (level == IX_OSAL_LOG_LVL_USER) ? 0 : strlen(traceHeaders[level - 1]); - - return headerByteCount + strlen(format); -#endif - } - else - { - /* - * Return error - */ - return (IX_OSAL_LOG_ERROR); - } -} - -PUBLIC UINT32 -ixOsalLogLevelSet (UINT32 level) -{ - UINT32 oldLevel; - - /* - * Check value first - */ - if ((level < IX_OSAL_LOG_LVL_NONE) || (level > IX_OSAL_LOG_LVL_ALL)) - { - ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, - IX_OSAL_LOG_DEV_STDOUT, - "ixOsalLogLevelSet: Log Level is between %d and%d \n", - IX_OSAL_LOG_LVL_NONE, IX_OSAL_LOG_LVL_ALL, 0, 0, 0, 0); - return IX_OSAL_LOG_LVL_NONE; - } - oldLevel = ixOsalCurrLogLevel; - - ixOsalCurrLogLevel = level; - - return oldLevel; -} - -/************************************** - * Task services - *************************************/ - -PUBLIC void -ixOsalBusySleep (UINT32 microseconds) -{ - udelay(microseconds); -} - -PUBLIC void -ixOsalSleep (UINT32 milliseconds) -{ - if (milliseconds != 0) { -#if 1 - /* - * sr: We poll while we wait because interrupts are off in U-Boot - * and CSR expects messages, etc to be dispatched while sleeping. - */ - int i; - IxQMgrDispatcherFuncPtr qDispatcherFunc; - - ixQMgrDispatcherLoopGet(&qDispatcherFunc); - - while (milliseconds--) { - for (i = 1; i <= 2; i++) - ixNpeMhMessagesReceive(i); - (*qDispatcherFunc)(IX_QMGR_QUELOW_GROUP); - - udelay(1000); - } -#endif - } -} - -/************************************** - * Memory functions - *************************************/ - -void * -ixOsalMemAlloc (UINT32 size) -{ - return (void *)0; -} - -void -ixOsalMemFree (void *ptr) -{ -} - -/* - * Copy count bytes from src to dest , - * returns pointer to the dest mem zone. - */ -void * -ixOsalMemCopy (void *dest, void *src, UINT32 count) -{ - IX_OSAL_ASSERT (dest != NULL); - IX_OSAL_ASSERT (src != NULL); - return (memcpy (dest, src, count)); -} - -/* - * Fills a memory zone with a given constant byte, - * returns pointer to the memory zone. - */ -void * -ixOsalMemSet (void *ptr, UINT8 filler, UINT32 count) -{ - IX_OSAL_ASSERT (ptr != NULL); - return (memset (ptr, filler, count)); -} diff --git a/drivers/net/npe/IxOsalOsThread.c b/drivers/net/npe/IxOsalOsThread.c deleted file mode 100644 index b3caae19b1..0000000000 --- a/drivers/net/npe/IxOsalOsThread.c +++ /dev/null @@ -1,74 +0,0 @@ -/** - * @file IxOsalOsThread.c (eCos) - * - * @brief OS-specific thread implementation. - * - * - * @par - * IXP400 SW Release version 1.5 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxOsal.h" - -/* Thread attribute is ignored */ -PUBLIC IX_STATUS -ixOsalThreadCreate (IxOsalThread * ptrTid, - IxOsalThreadAttr * threadAttr, IxOsalVoidFnVoidPtr entryPoint, void *arg) -{ - return IX_SUCCESS; -} - -/* - * Start thread after given its thread handle - */ -PUBLIC IX_STATUS -ixOsalThreadStart (IxOsalThread * tId) -{ - /* Thread already started upon creation */ - return IX_SUCCESS; -} - -/* - * In Linux threadKill does not actually destroy the thread, - * it will stop the signal handling. - */ -PUBLIC IX_STATUS -ixOsalThreadKill (IxOsalThread * tid) -{ - return IX_SUCCESS; -} - -PUBLIC void -ixOsalThreadExit (void) -{ -} - -PUBLIC IX_STATUS -ixOsalThreadPrioritySet (IxOsalOsThread * tid, UINT32 priority) -{ - return IX_SUCCESS; -} - -PUBLIC IX_STATUS -ixOsalThreadSuspend (IxOsalThread * tId) -{ - return IX_SUCCESS; - -} - -PUBLIC IX_STATUS -ixOsalThreadResume (IxOsalThread * tId) -{ - return IX_SUCCESS; -} diff --git a/drivers/net/npe/IxQMgrAqmIf.c b/drivers/net/npe/IxQMgrAqmIf.c deleted file mode 100644 index 69138ccded..0000000000 --- a/drivers/net/npe/IxQMgrAqmIf.c +++ /dev/null @@ -1,939 +0,0 @@ -/* - * @file: IxQMgrAqmIf.c - * - * @author Intel Corporation - * @date 30-Oct-2001 - * - * @brief This component provides a set of functions for - * perfoming I/O on the AQM hardware. - * - * Design Notes: - * These functions are intended to be as fast as possible - * and as a result perform NO PARAMETER CHECKING. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/* - * Inlines are compiled as function when this is defined. - * N.B. Must be placed before #include of "IxQMgrAqmIf_p.h - */ -#ifndef IXQMGRAQMIF_P_H -# define IXQMGRAQMIF_C -#else -# error -#endif - -/* - * User defined include files. - */ -#include "IxOsal.h" -#include "IxQMgr.h" -#include "IxQMgrAqmIf_p.h" -#include "IxQMgrLog_p.h" - - -/* - * #defines and macros used in this file. - */ - -/* These defines are the bit offsets of the various fields of - * the queue configuration register - */ -#define IX_QMGR_Q_CONFIG_WRPTR_OFFSET 0x00 -#define IX_QMGR_Q_CONFIG_RDPTR_OFFSET 0x07 -#define IX_QMGR_Q_CONFIG_BADDR_OFFSET 0x0E -#define IX_QMGR_Q_CONFIG_ESIZE_OFFSET 0x16 -#define IX_QMGR_Q_CONFIG_BSIZE_OFFSET 0x18 -#define IX_QMGR_Q_CONFIG_NE_OFFSET 0x1A -#define IX_QMGR_Q_CONFIG_NF_OFFSET 0x1D - -#define IX_QMGR_BASE_ADDR_16_WORD_ALIGN 0x40 -#define IX_QMGR_BASE_ADDR_16_WORD_SHIFT 0x6 - -#define IX_QMGR_NE_NF_CLEAR_MASK 0x03FFFFFF -#define IX_QMGR_NE_MASK 0x7 -#define IX_QMGR_NF_MASK 0x7 -#define IX_QMGR_SIZE_MASK 0x3 -#define IX_QMGR_ENTRY_SIZE_MASK 0x3 -#define IX_QMGR_BADDR_MASK 0x003FC000 -#define IX_QMGR_RDPTR_MASK 0x7F -#define IX_QMGR_WRPTR_MASK 0x7F -#define IX_QMGR_RDWRPTR_MASK 0x00003FFF - -#define IX_QMGR_AQM_ADDRESS_SPACE_SIZE_IN_WORDS 0x1000 - -/* Base address of AQM SRAM */ -#define IX_QMGR_AQM_SRAM_BASE_ADDRESS_OFFSET \ -((IX_QMGR_QUECONFIG_BASE_OFFSET) + (IX_QMGR_QUECONFIG_SIZE)) - -/* Min buffer size used for generating buffer size in QUECONFIG */ -#define IX_QMGR_MIN_BUFFER_SIZE 16 - -/* Reset values of QMgr hardware registers */ -#define IX_QMGR_QUELOWSTAT_RESET_VALUE 0x33333333 -#define IX_QMGR_QUEUOSTAT_RESET_VALUE 0x00000000 -#define IX_QMGR_QUEUPPSTAT0_RESET_VALUE 0xFFFFFFFF -#define IX_QMGR_QUEUPPSTAT1_RESET_VALUE 0x00000000 -#define IX_QMGR_INT0SRCSELREG_RESET_VALUE 0x00000000 -#define IX_QMGR_QUEIEREG_RESET_VALUE 0x00000000 -#define IX_QMGR_QINTREG_RESET_VALUE 0xFFFFFFFF -#define IX_QMGR_QUECONFIG_RESET_VALUE 0x00000000 - -#define IX_QMGR_PHYSICAL_AQM_BASE_ADDRESS IX_OSAL_IXP400_QMGR_PHYS_BASE - -#define IX_QMGR_QUELOWSTAT_BITS_PER_Q (BITS_PER_WORD/IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD) - -#define IX_QMGR_QUELOWSTAT_QID_MASK 0x7 -#define IX_QMGR_Q_CONFIG_ADDR_GET(qId)\ - (((qId) * IX_QMGR_NUM_BYTES_PER_WORD) +\ - IX_QMGR_QUECONFIG_BASE_OFFSET) - -#define IX_QMGR_ENTRY1_OFFSET 0 -#define IX_QMGR_ENTRY2_OFFSET 1 -#define IX_QMGR_ENTRY4_OFFSET 3 - -/* - * Variable declarations global to this file. Externs are followed by - * statics. - */ -UINT32 aqmBaseAddress = 0; -/* Store addresses and bit-masks for certain queue access and status registers. - * This is to facilitate inlining of QRead, QWrite and QStatusGet functions - * in IxQMgr,h - */ -extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; -UINT32 * ixQMgrAqmIfQueAccRegAddr[IX_QMGR_MAX_NUM_QUEUES]; -UINT32 ixQMgrAqmIfQueLowStatRegAddr[IX_QMGR_MIN_QUEUPP_QID]; -UINT32 ixQMgrAqmIfQueLowStatBitsOffset[IX_QMGR_MIN_QUEUPP_QID]; -UINT32 ixQMgrAqmIfQueLowStatBitsMask; -UINT32 ixQMgrAqmIfQueUppStat0RegAddr; -UINT32 ixQMgrAqmIfQueUppStat1RegAddr; -UINT32 ixQMgrAqmIfQueUppStat0BitMask[IX_QMGR_MIN_QUEUPP_QID]; -UINT32 ixQMgrAqmIfQueUppStat1BitMask[IX_QMGR_MIN_QUEUPP_QID]; - -/* - * Fast mutexes, one for each queue, used to protect peek & poke functions - */ -IxOsalFastMutex ixQMgrAqmIfPeekPokeFastMutex[IX_QMGR_MAX_NUM_QUEUES]; - -/* - * Function prototypes - */ -PRIVATE unsigned -watermarkToAqmWatermark (IxQMgrWMLevel watermark ); - -PRIVATE unsigned -entrySizeToAqmEntrySize (IxQMgrQEntrySizeInWords entrySize); - -PRIVATE unsigned -bufferSizeToAqmBufferSize (unsigned bufferSizeInWords); - -PRIVATE void -ixQMgrAqmIfRegistersReset (void); - -PRIVATE void -ixQMgrAqmIfEntryAddressGet (unsigned int entryIndex, - UINT32 configRegWord, - unsigned int qEntrySizeInwords, - unsigned int qSizeInWords, - UINT32 **address); -/* - * Function definitions - */ -void -ixQMgrAqmIfInit (void) -{ - UINT32 aqmVirtualAddr; - int i; - - /* The value of aqmBaseAddress depends on the logical address - * assigned by the MMU. - */ - aqmVirtualAddr = - (UINT32) IX_OSAL_MEM_MAP(IX_QMGR_PHYSICAL_AQM_BASE_ADDRESS, - IX_OSAL_IXP400_QMGR_MAP_SIZE); - IX_OSAL_ASSERT (aqmVirtualAddr); - - ixQMgrAqmIfBaseAddressSet (aqmVirtualAddr); - - ixQMgrAqmIfRegistersReset (); - - for (i = 0; i< IX_QMGR_MAX_NUM_QUEUES; i++) - { - ixOsalFastMutexInit(&ixQMgrAqmIfPeekPokeFastMutex[i]); - - /******************************************************************** - * Register addresses and bit masks are calculated and stored here to - * facilitate inlining of QRead, QWrite and QStatusGet functions in - * IxQMgr.h. - * These calculations are normally performed dynamically in inlined - * functions in IxQMgrAqmIf_p.h, and their semantics are reused here. - */ - - /* AQM Queue access reg addresses, per queue */ - ixQMgrAqmIfQueAccRegAddr[i] = - (UINT32 *)(aqmBaseAddress + IX_QMGR_Q_ACCESS_ADDR_GET(i)); - ixQMgrQInlinedReadWriteInfo[i].qAccRegAddr = - (volatile UINT32 *)(aqmBaseAddress + IX_QMGR_Q_ACCESS_ADDR_GET(i)); - - - ixQMgrQInlinedReadWriteInfo[i].qConfigRegAddr = - (volatile UINT32 *)(aqmBaseAddress + IX_QMGR_Q_CONFIG_ADDR_GET(i)); - - /* AQM Queue lower-group (0-31), only */ - if (i < IX_QMGR_MIN_QUEUPP_QID) - { - /* AQM Q underflow/overflow status register addresses, per queue */ - ixQMgrQInlinedReadWriteInfo[i].qUOStatRegAddr = - (volatile UINT32 *)(aqmBaseAddress + - IX_QMGR_QUEUOSTAT0_OFFSET + - ((i / IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD) * - IX_QMGR_NUM_BYTES_PER_WORD)); - - /* AQM Q underflow status bit masks for status register per queue */ - ixQMgrQInlinedReadWriteInfo[i].qUflowStatBitMask = - (IX_QMGR_UNDERFLOW_BIT_OFFSET + 1) << - ((i & (IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD - 1)) * - (BITS_PER_WORD / IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD)); - - /* AQM Q overflow status bit masks for status register, per queue */ - ixQMgrQInlinedReadWriteInfo[i].qOflowStatBitMask = - (IX_QMGR_OVERFLOW_BIT_OFFSET + 1) << - ((i & (IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD - 1)) * - (BITS_PER_WORD / IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD)); - - /* AQM Q lower-group (0-31) status register addresses, per queue */ - ixQMgrAqmIfQueLowStatRegAddr[i] = aqmBaseAddress + - IX_QMGR_QUELOWSTAT0_OFFSET + - ((i / IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD) * - IX_QMGR_NUM_BYTES_PER_WORD); - - /* AQM Q lower-group (0-31) status register bit offset */ - ixQMgrAqmIfQueLowStatBitsOffset[i] = - (i & (IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD - 1)) * - (BITS_PER_WORD / IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD); - } - else /* AQM Q upper-group (32-63), only */ - { - /* AQM Q upper-group (32-63) Nearly Empty status reg bit masks */ - ixQMgrAqmIfQueUppStat0BitMask[i - IX_QMGR_MIN_QUEUPP_QID] = - (1 << (i - IX_QMGR_MIN_QUEUPP_QID)); - - /* AQM Q upper-group (32-63) Full status register bit masks */ - ixQMgrAqmIfQueUppStat1BitMask[i - IX_QMGR_MIN_QUEUPP_QID] = - (1 << (i - IX_QMGR_MIN_QUEUPP_QID)); - } - } - - /* AQM Q lower-group (0-31) status register bit mask */ - ixQMgrAqmIfQueLowStatBitsMask = (1 << - (BITS_PER_WORD / - IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD)) - 1; - - /* AQM Q upper-group (32-63) Nearly Empty status register address */ - ixQMgrAqmIfQueUppStat0RegAddr = aqmBaseAddress + IX_QMGR_QUEUPPSTAT0_OFFSET; - - /* AQM Q upper-group (32-63) Full status register address */ - ixQMgrAqmIfQueUppStat1RegAddr = aqmBaseAddress + IX_QMGR_QUEUPPSTAT1_OFFSET; -} - -/* - * Uninitialise the AqmIf module by unmapping memory, etc - */ -void -ixQMgrAqmIfUninit (void) -{ - UINT32 virtAddr; - - ixQMgrAqmIfBaseAddressGet (&virtAddr); - IX_OSAL_MEM_UNMAP (virtAddr); - ixQMgrAqmIfBaseAddressSet (0); -} - -/* - * Set the the logical base address of AQM - */ -void -ixQMgrAqmIfBaseAddressSet (UINT32 address) -{ - aqmBaseAddress = address; -} - -/* - * Get the logical base address of AQM - */ -void -ixQMgrAqmIfBaseAddressGet (UINT32 *address) -{ - *address = aqmBaseAddress; -} - -/* - * Get the logical base address of AQM SRAM - */ -void -ixQMgrAqmIfSramBaseAddressGet (UINT32 *address) -{ - *address = aqmBaseAddress + - IX_QMGR_AQM_SRAM_BASE_ADDRESS_OFFSET; -} - -/* - * This function will write the status bits of a queue - * specified by qId. - */ -void -ixQMgrAqmIfQRegisterBitsWrite (IxQMgrQId qId, - UINT32 registerBaseAddrOffset, - unsigned queuesPerRegWord, - UINT32 value) -{ - volatile UINT32 *registerAddress; - UINT32 registerWord; - UINT32 statusBitsMask; - UINT32 bitsPerQueue; - - bitsPerQueue = BITS_PER_WORD / queuesPerRegWord; - - /* - * Calculate the registerAddress - * multiple queues split accross registers - */ - registerAddress = (UINT32*)(aqmBaseAddress + - registerBaseAddrOffset + - ((qId / queuesPerRegWord) * - IX_QMGR_NUM_BYTES_PER_WORD)); - - /* Read the current data */ - ixQMgrAqmIfWordRead (registerAddress, ®isterWord); - - - if( (registerBaseAddrOffset == IX_QMGR_INT0SRCSELREG0_OFFSET) && - (qId == IX_QMGR_QUEUE_0) ) - { - statusBitsMask = 0x7 ; - - /* Queue 0 at INT0SRCSELREG should not corrupt the value bit-3 */ - value &= 0x7 ; - } - else - { - /* Calculate the mask for the status bits for this queue. */ - statusBitsMask = ((1 << bitsPerQueue) - 1); - statusBitsMask <<= ((qId & (queuesPerRegWord - 1)) * bitsPerQueue); - - /* Mask out bits in value that would overwrite other q data */ - value <<= ((qId & (queuesPerRegWord - 1)) * bitsPerQueue); - value &= statusBitsMask; - } - - /* Mask out bits to write to */ - registerWord &= ~statusBitsMask; - - - /* Set the write bits */ - registerWord |= value; - - /* - * Write the data - */ - ixQMgrAqmIfWordWrite (registerAddress, registerWord); -} - -/* - * This function generates the parameters that can be used to - * check if a Qs status matches the specified source select. - * It calculates which status word to check (statusWordOffset), - * the value to check the status against (checkValue) and the - * mask (mask) to mask out all but the bits to check in the status word. - */ -void -ixQMgrAqmIfQStatusCheckValsCalc (IxQMgrQId qId, - IxQMgrSourceId srcSel, - unsigned int *statusWordOffset, - UINT32 *checkValue, - UINT32 *mask) -{ - UINT32 shiftVal; - - if (qId < IX_QMGR_MIN_QUEUPP_QID) - { - switch (srcSel) - { - case IX_QMGR_Q_SOURCE_ID_E: - *checkValue = IX_QMGR_Q_STATUS_E_BIT_MASK; - *mask = IX_QMGR_Q_STATUS_E_BIT_MASK; - break; - case IX_QMGR_Q_SOURCE_ID_NE: - *checkValue = IX_QMGR_Q_STATUS_NE_BIT_MASK; - *mask = IX_QMGR_Q_STATUS_NE_BIT_MASK; - break; - case IX_QMGR_Q_SOURCE_ID_NF: - *checkValue = IX_QMGR_Q_STATUS_NF_BIT_MASK; - *mask = IX_QMGR_Q_STATUS_NF_BIT_MASK; - break; - case IX_QMGR_Q_SOURCE_ID_F: - *checkValue = IX_QMGR_Q_STATUS_F_BIT_MASK; - *mask = IX_QMGR_Q_STATUS_F_BIT_MASK; - break; - case IX_QMGR_Q_SOURCE_ID_NOT_E: - *checkValue = 0; - *mask = IX_QMGR_Q_STATUS_E_BIT_MASK; - break; - case IX_QMGR_Q_SOURCE_ID_NOT_NE: - *checkValue = 0; - *mask = IX_QMGR_Q_STATUS_NE_BIT_MASK; - break; - case IX_QMGR_Q_SOURCE_ID_NOT_NF: - *checkValue = 0; - *mask = IX_QMGR_Q_STATUS_NF_BIT_MASK; - break; - case IX_QMGR_Q_SOURCE_ID_NOT_F: - *checkValue = 0; - *mask = IX_QMGR_Q_STATUS_F_BIT_MASK; - break; - default: - /* Should never hit */ - IX_OSAL_ASSERT(0); - break; - } - - /* One nibble of status per queue so need to shift the - * check value and mask out to the correct position. - */ - shiftVal = (qId % IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD) * - IX_QMGR_QUELOWSTAT_BITS_PER_Q; - - /* Calculate the which status word to check from the qId, - * 8 Qs status per word - */ - *statusWordOffset = qId / IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD; - - *checkValue <<= shiftVal; - *mask <<= shiftVal; - } - else - { - /* One status word */ - *statusWordOffset = 0; - /* Single bits per queue and int source bit hardwired NE, - * Qs start at 32. - */ - *mask = 1 << (qId - IX_QMGR_MIN_QUEUPP_QID); - *checkValue = *mask; - } -} - -void -ixQMgrAqmIfQInterruptEnable (IxQMgrQId qId) -{ - volatile UINT32 *registerAddress; - UINT32 registerWord; - UINT32 actualBitOffset; - - if (qId < IX_QMGR_MIN_QUEUPP_QID) - { - registerAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_QUEIEREG0_OFFSET); - } - else - { - registerAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_QUEIEREG1_OFFSET); - } - - actualBitOffset = 1 << (qId % IX_QMGR_MIN_QUEUPP_QID); - - ixQMgrAqmIfWordRead (registerAddress, ®isterWord); - ixQMgrAqmIfWordWrite (registerAddress, (registerWord | actualBitOffset)); -} - -void -ixQMgrAqmIfQInterruptDisable (IxQMgrQId qId) -{ - volatile UINT32 *registerAddress; - UINT32 registerWord; - UINT32 actualBitOffset; - - if (qId < IX_QMGR_MIN_QUEUPP_QID) - { - registerAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_QUEIEREG0_OFFSET); - } - else - { - registerAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_QUEIEREG1_OFFSET); - } - - actualBitOffset = 1 << (qId % IX_QMGR_MIN_QUEUPP_QID); - - ixQMgrAqmIfWordRead (registerAddress, ®isterWord); - ixQMgrAqmIfWordWrite (registerAddress, registerWord & (~actualBitOffset)); -} - -void -ixQMgrAqmIfQueCfgWrite (IxQMgrQId qId, - IxQMgrQSizeInWords qSizeInWords, - IxQMgrQEntrySizeInWords entrySizeInWords, - UINT32 freeSRAMAddress) -{ - volatile UINT32 *cfgAddress = NULL; - UINT32 qCfg = 0; - UINT32 baseAddress = 0; - unsigned aqmEntrySize = 0; - unsigned aqmBufferSize = 0; - - /* Build config register */ - aqmEntrySize = entrySizeToAqmEntrySize (entrySizeInWords); - qCfg |= (aqmEntrySize&IX_QMGR_ENTRY_SIZE_MASK) << - IX_QMGR_Q_CONFIG_ESIZE_OFFSET; - - aqmBufferSize = bufferSizeToAqmBufferSize (qSizeInWords); - qCfg |= (aqmBufferSize&IX_QMGR_SIZE_MASK) << IX_QMGR_Q_CONFIG_BSIZE_OFFSET; - - /* baseAddress, calculated relative to aqmBaseAddress and start address */ - baseAddress = freeSRAMAddress - - (aqmBaseAddress + IX_QMGR_QUECONFIG_BASE_OFFSET); - - /* Verify base address aligned to a 16 word boundary */ - if ((baseAddress % IX_QMGR_BASE_ADDR_16_WORD_ALIGN) != 0) - { - IX_QMGR_LOG_ERROR0("ixQMgrAqmIfQueCfgWrite () address is not on 16 word boundary\n"); - } - /* Now convert it to a 16 word pointer as required by QUECONFIG register */ - baseAddress >>= IX_QMGR_BASE_ADDR_16_WORD_SHIFT; - - - qCfg |= (baseAddress << IX_QMGR_Q_CONFIG_BADDR_OFFSET); - - - cfgAddress = (UINT32*)(aqmBaseAddress + - IX_QMGR_Q_CONFIG_ADDR_GET(qId)); - - - /* NOTE: High and Low watermarks are set to zero */ - ixQMgrAqmIfWordWrite (cfgAddress, qCfg); -} - -void -ixQMgrAqmIfQueCfgRead (IxQMgrQId qId, - unsigned int numEntries, - UINT32 *baseAddress, - unsigned int *ne, - unsigned int *nf, - UINT32 *readPtr, - UINT32 *writePtr) -{ - UINT32 qcfg; - UINT32 *cfgAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_Q_CONFIG_ADDR_GET(qId)); - unsigned int qEntrySizeInwords; - unsigned int qSizeInWords; - UINT32 *readPtr_ = NULL; - - /* Read the queue configuration register */ - ixQMgrAqmIfWordRead (cfgAddress, &qcfg); - - /* Extract the base address */ - *baseAddress = (UINT32)((qcfg & IX_QMGR_BADDR_MASK) >> - (IX_QMGR_Q_CONFIG_BADDR_OFFSET)); - - /* Base address is a 16 word pointer from the start of AQM SRAM. - * Convert to absolute word address. - */ - *baseAddress <<= IX_QMGR_BASE_ADDR_16_WORD_SHIFT; - *baseAddress += (UINT32)IX_QMGR_QUECONFIG_BASE_OFFSET; - - /* - * Extract the watermarks. 0->0 entries, 1->1 entries, 2->2 entries, 3->4 entries...... - * If ne > 0 ==> neInEntries = 2^(ne - 1) - * If ne == 0 ==> neInEntries = 0 - * The same applies. - */ - *ne = ((qcfg) >> (IX_QMGR_Q_CONFIG_NE_OFFSET)) & IX_QMGR_NE_MASK; - *nf = ((qcfg) >> (IX_QMGR_Q_CONFIG_NF_OFFSET)) & IX_QMGR_NF_MASK; - - if (0 != *ne) - { - *ne = 1 << (*ne - 1); - } - if (0 != *nf) - { - *nf = 1 << (*nf - 1); - } - - /* Get the queue entry size in words */ - qEntrySizeInwords = ixQMgrQEntrySizeInWordsGet (qId); - - /* Get the queue size in words */ - qSizeInWords = ixQMgrQSizeInWordsGet (qId); - - ixQMgrAqmIfEntryAddressGet (0/* Entry 0. i.e the readPtr*/, - qcfg, - qEntrySizeInwords, - qSizeInWords, - &readPtr_); - *readPtr = (UINT32)readPtr_; - *readPtr -= (UINT32)aqmBaseAddress;/* Offset, not absolute address */ - - *writePtr = (qcfg >> IX_QMGR_Q_CONFIG_WRPTR_OFFSET) & IX_QMGR_WRPTR_MASK; - *writePtr = *baseAddress + (*writePtr * (IX_QMGR_NUM_BYTES_PER_WORD)); - return; -} - -unsigned -ixQMgrAqmIfLog2 (unsigned number) -{ - unsigned count = 0; - - /* - * N.B. this function will return 0 - * for ixQMgrAqmIfLog2 (0) - */ - while (number/2) - { - number /=2; - count++; - } - - return count; -} - -void ixQMgrAqmIfIntSrcSelReg0Bit3Set (void) -{ - - volatile UINT32 *registerAddress; - UINT32 registerWord; - - /* - * Calculate the registerAddress - * multiple queues split accross registers - */ - registerAddress = (UINT32*)(aqmBaseAddress + - IX_QMGR_INT0SRCSELREG0_OFFSET); - - /* Read the current data */ - ixQMgrAqmIfWordRead (registerAddress, ®isterWord); - - /* Set the write bits */ - registerWord |= (1<> - (IX_QMGR_Q_CONFIG_BADDR_OFFSET)); - - /* Base address is a 16 word pointer from the start of AQM SRAM. - * Convert to absolute word address. - */ - baseAddress <<= IX_QMGR_BASE_ADDR_16_WORD_SHIFT; - baseAddress += ((UINT32)aqmBaseAddress + (UINT32)IX_QMGR_QUECONFIG_BASE_OFFSET); - - /* Extract the read pointer. Read pointer is a word pointer */ - readPtr = (UINT32)((configRegWord >> - IX_QMGR_Q_CONFIG_RDPTR_OFFSET)&IX_QMGR_RDPTR_MASK); - - /* Read/Write pointers(word pointers) are offsets from the queue buffer space base address. - * Calculate the absolute read pointer address. NOTE: Queues are circular buffers. - */ - readPtr = (readPtr + (entryIndex * qEntrySizeInwords)) & (qSizeInWords - 1); /* Mask by queue size */ - *address = (UINT32 *)(baseAddress + (readPtr * (IX_QMGR_NUM_BYTES_PER_WORD))); - - switch (qEntrySizeInwords) - { - case IX_QMGR_Q_ENTRY_SIZE1: - IX_OSAL_ASSERT((*address + IX_QMGR_ENTRY1_OFFSET) < topOfAqmSram); - break; - case IX_QMGR_Q_ENTRY_SIZE2: - IX_OSAL_ASSERT((*address + IX_QMGR_ENTRY2_OFFSET) < topOfAqmSram); - break; - case IX_QMGR_Q_ENTRY_SIZE4: - IX_OSAL_ASSERT((*address + IX_QMGR_ENTRY4_OFFSET) < topOfAqmSram); - break; - default: - IX_QMGR_LOG_ERROR0("Invalid Q Entry size passed to ixQMgrAqmIfEntryAddressGet"); - break; - } - -} - -IX_STATUS -ixQMgrAqmIfQPeek (IxQMgrQId qId, - unsigned int entryIndex, - unsigned int *entry) -{ - UINT32 *cfgRegAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_Q_CONFIG_ADDR_GET(qId)); - UINT32 *entryAddress = NULL; - UINT32 configRegWordOnEntry; - UINT32 configRegWordOnExit; - unsigned int qEntrySizeInwords; - unsigned int qSizeInWords; - - /* Get the queue entry size in words */ - qEntrySizeInwords = ixQMgrQEntrySizeInWordsGet (qId); - - /* Get the queue size in words */ - qSizeInWords = ixQMgrQSizeInWordsGet (qId); - - /* Read the config register */ - ixQMgrAqmIfWordRead (cfgRegAddress, &configRegWordOnEntry); - - /* Get the entry address */ - ixQMgrAqmIfEntryAddressGet (entryIndex, - configRegWordOnEntry, - qEntrySizeInwords, - qSizeInWords, - &entryAddress); - - /* Get the lock or return busy */ - if (IX_SUCCESS != ixOsalFastMutexTryLock(&ixQMgrAqmIfPeekPokeFastMutex[qId])) - { - return IX_FAIL; - } - - while(qEntrySizeInwords--) - { - ixQMgrAqmIfWordRead (entryAddress++, entry++); - } - - /* Release the lock */ - ixOsalFastMutexUnlock(&ixQMgrAqmIfPeekPokeFastMutex[qId]); - - /* Read the config register */ - ixQMgrAqmIfWordRead (cfgRegAddress, &configRegWordOnExit); - - /* Check that the read and write pointers have not changed */ - if (configRegWordOnEntry != configRegWordOnExit) - { - return IX_FAIL; - } - - return IX_SUCCESS; -} - -IX_STATUS -ixQMgrAqmIfQPoke (IxQMgrQId qId, - unsigned entryIndex, - unsigned int *entry) -{ - UINT32 *cfgRegAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_Q_CONFIG_ADDR_GET(qId)); - UINT32 *entryAddress = NULL; - UINT32 configRegWordOnEntry; - UINT32 configRegWordOnExit; - unsigned int qEntrySizeInwords; - unsigned int qSizeInWords; - - /* Get the queue entry size in words */ - qEntrySizeInwords = ixQMgrQEntrySizeInWordsGet (qId); - - /* Get the queue size in words */ - qSizeInWords = ixQMgrQSizeInWordsGet (qId); - - /* Read the config register */ - ixQMgrAqmIfWordRead (cfgRegAddress, &configRegWordOnEntry); - - /* Get the entry address */ - ixQMgrAqmIfEntryAddressGet (entryIndex, - configRegWordOnEntry, - qEntrySizeInwords, - qSizeInWords, - &entryAddress); - - /* Get the lock or return busy */ - if (IX_SUCCESS != ixOsalFastMutexTryLock(&ixQMgrAqmIfPeekPokeFastMutex[qId])) - { - return IX_FAIL; - } - - /* Else read the entry directly from SRAM. This will not move the read pointer */ - while(qEntrySizeInwords--) - { - ixQMgrAqmIfWordWrite (entryAddress++, *entry++); - } - - /* Release the lock */ - ixOsalFastMutexUnlock(&ixQMgrAqmIfPeekPokeFastMutex[qId]); - - /* Read the config register */ - ixQMgrAqmIfWordRead (cfgRegAddress, &configRegWordOnExit); - - /* Check that the read and write pointers have not changed */ - if (configRegWordOnEntry != configRegWordOnExit) - { - return IX_FAIL; - } - - return IX_SUCCESS; -} - -PRIVATE unsigned -watermarkToAqmWatermark (IxQMgrWMLevel watermark ) -{ - unsigned aqmWatermark = 0; - - /* - * Watermarks 0("000"),1("001"),2("010"),4("011"), - * 8("100"),16("101"),32("110"),64("111") - */ - aqmWatermark = ixQMgrAqmIfLog2 (watermark * 2); - - return aqmWatermark; -} - -PRIVATE unsigned -entrySizeToAqmEntrySize (IxQMgrQEntrySizeInWords entrySize) -{ - /* entrySize 1("00"),2("01"),4("10") */ - return (ixQMgrAqmIfLog2 (entrySize)); -} - -PRIVATE unsigned -bufferSizeToAqmBufferSize (unsigned bufferSizeInWords) -{ - /* bufferSize 16("00"),32("01),64("10"),128("11") */ - return (ixQMgrAqmIfLog2 (bufferSizeInWords / IX_QMGR_MIN_BUFFER_SIZE)); -} - -/* - * Reset AQM registers to default values. - */ -PRIVATE void -ixQMgrAqmIfRegistersReset (void) -{ - volatile UINT32 *qConfigWordAddress = NULL; - unsigned int i; - - /* - * Need to initialize AQM hardware registers to an initial - * value as init may have been called as a result of a soft - * reset. i.e. soft reset does not reset hardware registers. - */ - - /* Reset queues 0..31 status registers 0..3 */ - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUELOWSTAT0_OFFSET), - IX_QMGR_QUELOWSTAT_RESET_VALUE); - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUELOWSTAT1_OFFSET), - IX_QMGR_QUELOWSTAT_RESET_VALUE); - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUELOWSTAT2_OFFSET), - IX_QMGR_QUELOWSTAT_RESET_VALUE); - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUELOWSTAT3_OFFSET), - IX_QMGR_QUELOWSTAT_RESET_VALUE); - - /* Reset underflow/overflow status registers 0..1 */ - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEUOSTAT0_OFFSET), - IX_QMGR_QUEUOSTAT_RESET_VALUE); - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEUOSTAT1_OFFSET), - IX_QMGR_QUEUOSTAT_RESET_VALUE); - - /* Reset queues 32..63 nearly empty status registers */ - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEUPPSTAT0_OFFSET), - IX_QMGR_QUEUPPSTAT0_RESET_VALUE); - - /* Reset queues 32..63 full status registers */ - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEUPPSTAT1_OFFSET), - IX_QMGR_QUEUPPSTAT1_RESET_VALUE); - - /* Reset int0 status flag source select registers 0..3 */ - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_INT0SRCSELREG0_OFFSET), - IX_QMGR_INT0SRCSELREG_RESET_VALUE); - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_INT0SRCSELREG1_OFFSET), - IX_QMGR_INT0SRCSELREG_RESET_VALUE); - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_INT0SRCSELREG2_OFFSET), - IX_QMGR_INT0SRCSELREG_RESET_VALUE); - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_INT0SRCSELREG3_OFFSET), - IX_QMGR_INT0SRCSELREG_RESET_VALUE); - - /* Reset queue interrupt enable register 0..1 */ - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEIEREG0_OFFSET), - IX_QMGR_QUEIEREG_RESET_VALUE); - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEIEREG1_OFFSET), - IX_QMGR_QUEIEREG_RESET_VALUE); - - /* Reset queue interrupt register 0..1 */ - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QINTREG0_OFFSET), - IX_QMGR_QINTREG_RESET_VALUE); - ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QINTREG1_OFFSET), - IX_QMGR_QINTREG_RESET_VALUE); - - /* Reset queue configuration words 0..63 */ - qConfigWordAddress = (UINT32 *)(aqmBaseAddress + IX_QMGR_QUECONFIG_BASE_OFFSET); - for (i = 0; i < (IX_QMGR_QUECONFIG_SIZE / sizeof(UINT32)); i++) - { - ixQMgrAqmIfWordWrite(qConfigWordAddress, - IX_QMGR_QUECONFIG_RESET_VALUE); - /* Next word */ - qConfigWordAddress++; - } -} - diff --git a/drivers/net/npe/IxQMgrDispatcher.c b/drivers/net/npe/IxQMgrDispatcher.c deleted file mode 100644 index 2baeaafeb1..0000000000 --- a/drivers/net/npe/IxQMgrDispatcher.c +++ /dev/null @@ -1,1320 +0,0 @@ -/** - * @file IxQMgrDispatcher.c - * - * @author Intel Corporation - * @date 20-Dec-2001 - * - * @brief This file contains the implementation of the Dispatcher sub component - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/* - * User defined include files. - */ -#include "IxQMgr.h" -#include "IxQMgrAqmIf_p.h" -#include "IxQMgrQCfg_p.h" -#include "IxQMgrDispatcher_p.h" -#include "IxQMgrLog_p.h" -#include "IxQMgrDefines_p.h" -#include "IxFeatureCtrl.h" -#include "IxOsal.h" - - - -/* - * #defines and macros used in this file. - */ - - -/* - * This constant is used to indicate the number of priority levels supported - */ -#define IX_QMGR_NUM_PRIORITY_LEVELS 3 - -/* - * This constant is used to set the size of the array of status words - */ -#define MAX_Q_STATUS_WORDS 4 - -/* - * This macro is used to check if a given priority is valid - */ -#define IX_QMGR_DISPATCHER_PRIORITY_CHECK(priority) \ -(((priority) >= IX_QMGR_Q_PRIORITY_0) && ((priority) <= IX_QMGR_Q_PRIORITY_2)) - -/* - * This macto is used to check that a given interrupt source is valid - */ -#define IX_QMGR_DISPATCHER_SOURCE_ID_CHECK(srcSel) \ -(((srcSel) >= IX_QMGR_Q_SOURCE_ID_E) && ((srcSel) <= IX_QMGR_Q_SOURCE_ID_NOT_F)) - -/* - * Number of times a dummy callback is called before logging a trace - * message - */ -#define LOG_THROTTLE_COUNT 1000000 - -/* Priority tables limits */ -#define IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX (0) -#define IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX (16) -#define IX_QMGR_MAX_LOW_QUE_PRIORITY_TABLE_INDEX (31) -#define IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX (32) -#define IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX (48) -#define IX_QMGR_MAX_UPP_QUE_PRIORITY_TABLE_INDEX (63) - -/* - * This macro is used to check if a given callback type is valid - */ -#define IX_QMGR_DISPATCHER_CALLBACK_TYPE_CHECK(type) \ - (((type) >= IX_QMGR_TYPE_REALTIME_OTHER) && \ - ((type) <= IX_QMGR_TYPE_REALTIME_SPORADIC)) - -/* - * define max index in lower queue to use in loops - */ -#define IX_QMGR_MAX_LOW_QUE_TABLE_INDEX (31) - -/* - * Typedefs whose scope is limited to this file. - */ - -/* - * Information on a queue needed by the Dispatcher - */ -typedef struct -{ - IxQMgrCallback callback; /* Notification callback */ - IxQMgrCallbackId callbackId; /* Notification callback identifier */ - unsigned dummyCallbackCount; /* Number of times runs of dummy callback */ - IxQMgrPriority priority; /* Dispatch priority */ - unsigned int statusWordOffset; /* Offset to the status word to check */ - UINT32 statusMask; /* Status mask */ - UINT32 statusCheckValue; /* Status check value */ - UINT32 intRegCheckMask; /* Interrupt register check mask */ -} IxQMgrQInfo; - -/* - * Variable declarations global to this file. Externs are followed by - * statics. - */ - -/* - * Flag to keep record of what dispatcher set in featureCtrl when ixQMgrInit() - * is called. This is needed because it is possible that a client might - * change whether the live lock prevention dispatcher is used between - * calls to ixQMgrInit() and ixQMgrDispatcherLoopGet(). - */ -PRIVATE IX_STATUS ixQMgrOrigB0Dispatcher = IX_FEATURE_CTRL_COMPONENT_ENABLED; - -/* - * keep record of Q types - not in IxQMgrQInfo for performance as - * it is only used with ixQMgrDispatcherLoopRunB0LLP() - */ -PRIVATE IxQMgrType ixQMgrQTypes[IX_QMGR_MAX_NUM_QUEUES]; - -/* - * This array contains a list of queue identifiers ordered by priority. The table - * is split logically between queue identifiers 0-31 and 32-63. - */ -static IxQMgrQId priorityTable[IX_QMGR_MAX_NUM_QUEUES]; - -/* - * This flag indicates to the dispatcher that the priority table needs to be rebuilt. - */ -static BOOL rebuildTable = false; - -/* Dispatcher statistics */ -static IxQMgrDispatcherStats dispatcherStats; - -/* Table of queue information */ -static IxQMgrQInfo dispatchQInfo[IX_QMGR_MAX_NUM_QUEUES]; - -/* Masks use to identify the first queues in the priority tables -* when comparing with the interrupt register -*/ -static unsigned int lowPriorityTableFirstHalfMask; -static unsigned int uppPriorityTableFirstHalfMask; - -/* - * Static function prototypes - */ - -/* - * This function is the default callback for all queues - */ -PRIVATE void -dummyCallback (IxQMgrQId qId, - IxQMgrCallbackId cbId); - -PRIVATE void -ixQMgrDispatcherReBuildPriorityTable (void); - -/* - * Function definitions. - */ -void -ixQMgrDispatcherInit (void) -{ - int i; - IxFeatureCtrlProductId productId = 0; - IxFeatureCtrlDeviceId deviceId = 0; - BOOL stickyIntSilicon = true; - - /* Set default priorities */ - for (i=0; i< IX_QMGR_MAX_NUM_QUEUES; i++) - { - dispatchQInfo[i].callback = dummyCallback; - dispatchQInfo[i].callbackId = 0; - dispatchQInfo[i].dummyCallbackCount = 0; - dispatchQInfo[i].priority = IX_QMGR_Q_PRIORITY_2; - dispatchQInfo[i].statusWordOffset = 0; - dispatchQInfo[i].statusCheckValue = 0; - dispatchQInfo[i].statusMask = 0; - /* - * There are two interrupt registers, 32 bits each. One for the lower - * queues(0-31) and one for the upper queues(32-63). Therefore need to - * mod by 32 i.e the min upper queue identifier. - */ - dispatchQInfo[i].intRegCheckMask = (1<<(i%(IX_QMGR_MIN_QUEUPP_QID))); - - /* - * Set the Q types - will only be used with livelock - */ - ixQMgrQTypes[i] = IX_QMGR_TYPE_REALTIME_OTHER; - - /* Reset queue statistics */ - dispatcherStats.queueStats[i].callbackCnt = 0; - dispatcherStats.queueStats[i].priorityChangeCnt = 0; - dispatcherStats.queueStats[i].intNoCallbackCnt = 0; - dispatcherStats.queueStats[i].intLostCallbackCnt = 0; - dispatcherStats.queueStats[i].notificationEnabled = false; - dispatcherStats.queueStats[i].srcSel = 0; - - } - - /* Priority table. Order the table from queue 0 to 63 */ - ixQMgrDispatcherReBuildPriorityTable(); - - /* Reset statistics */ - dispatcherStats.loopRunCnt = 0; - - /* Get the device ID for the underlying silicon */ - deviceId = ixFeatureCtrlDeviceRead(); - - /* Get the product ID for the underlying silicon */ - productId = ixFeatureCtrlProductIdRead(); - - /* - * Check featureCtrl to see if Livelock prevention is required - */ - ixQMgrOrigB0Dispatcher = ixFeatureCtrlSwConfigurationCheck( - IX_FEATURECTRL_ORIGB0_DISPATCHER); - - /* - * Check if the silicon supports the sticky interrupt feature. - * IF (IXP42X AND A0) -> No sticky interrupt feature supported - */ - if ((IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X == - (IX_FEATURE_CTRL_DEVICE_TYPE_MASK & deviceId)) && - (IX_FEATURE_CTRL_SILICON_TYPE_A0 == - (IX_FEATURE_CTRL_SILICON_STEPPING_MASK & productId))) - { - stickyIntSilicon = false; - } - - /* - * IF user wants livelock prev option AND silicon supports sticky interrupt - * feature -> enable the sticky interrupt bit - */ - if ((IX_FEATURE_CTRL_SWCONFIG_DISABLED == ixQMgrOrigB0Dispatcher) && - stickyIntSilicon) - { - ixQMgrStickyInterruptRegEnable(); - } -} - -IX_STATUS -ixQMgrDispatcherPrioritySet (IxQMgrQId qId, - IxQMgrPriority priority) -{ - int ixQMgrLockKey; - - if (!ixQMgrQIsConfigured(qId)) - { - return IX_QMGR_Q_NOT_CONFIGURED; - } - - if (!IX_QMGR_DISPATCHER_PRIORITY_CHECK(priority)) - { - return IX_QMGR_Q_INVALID_PRIORITY; - } - - ixQMgrLockKey = ixOsalIrqLock(); - - /* Change priority */ - dispatchQInfo[qId].priority = priority; - /* Set flag */ - rebuildTable = true; - - ixOsalIrqUnlock(ixQMgrLockKey); - -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.queueStats[qId].priorityChangeCnt++; -#endif - - return IX_SUCCESS; -} - -IX_STATUS -ixQMgrNotificationCallbackSet (IxQMgrQId qId, - IxQMgrCallback callback, - IxQMgrCallbackId callbackId) -{ - if (!ixQMgrQIsConfigured(qId)) - { - return IX_QMGR_Q_NOT_CONFIGURED; - } - - if (NULL == callback) - { - /* Reset to dummy callback */ - dispatchQInfo[qId].callback = dummyCallback; - dispatchQInfo[qId].dummyCallbackCount = 0; - dispatchQInfo[qId].callbackId = 0; - } - else - { - dispatchQInfo[qId].callback = callback; - dispatchQInfo[qId].callbackId = callbackId; - } - - return IX_SUCCESS; -} - -IX_STATUS -ixQMgrNotificationEnable (IxQMgrQId qId, - IxQMgrSourceId srcSel) -{ - IxQMgrQStatus qStatusOnEntry;/* The queue status on entry/exit */ - IxQMgrQStatus qStatusOnExit; /* to this function */ - int ixQMgrLockKey; - -#ifndef NDEBUG - if (!ixQMgrQIsConfigured (qId)) - { - return IX_QMGR_Q_NOT_CONFIGURED; - } - - if ((qId < IX_QMGR_MIN_QUEUPP_QID) && - !IX_QMGR_DISPATCHER_SOURCE_ID_CHECK(srcSel)) - { - /* QId 0-31 source id invalid */ - return IX_QMGR_INVALID_INT_SOURCE_ID; - } - - if ((IX_QMGR_Q_SOURCE_ID_NE != srcSel) && - (qId >= IX_QMGR_MIN_QUEUPP_QID)) - { - /* - * For queues 32-63 the interrupt source is fixed to the Nearly - * Empty status flag and therefore should have a srcSel of NE. - */ - return IX_QMGR_INVALID_INT_SOURCE_ID; - } -#endif - -#ifndef NDEBUG - dispatcherStats.queueStats[qId].notificationEnabled = true; - dispatcherStats.queueStats[qId].srcSel = srcSel; -#endif - - /* Get the current queue status */ - ixQMgrAqmIfQueStatRead (qId, &qStatusOnEntry); - - /* - * Enabling interrupts results in Read-Modify-Write - * so need critical section - */ - - ixQMgrLockKey = ixOsalIrqLock(); - - /* Calculate the checkMask and checkValue for this q */ - ixQMgrAqmIfQStatusCheckValsCalc (qId, - srcSel, - &dispatchQInfo[qId].statusWordOffset, - &dispatchQInfo[qId].statusCheckValue, - &dispatchQInfo[qId].statusMask); - - - /* Set the interrupt source is this queue is in the range 0-31 */ - if (qId < IX_QMGR_MIN_QUEUPP_QID) - { - ixQMgrAqmIfIntSrcSelWrite (qId, srcSel); - } - - /* Enable the interrupt */ - ixQMgrAqmIfQInterruptEnable (qId); - - ixOsalIrqUnlock(ixQMgrLockKey); - - /* Get the current queue status */ - ixQMgrAqmIfQueStatRead (qId, &qStatusOnExit); - - /* If the status has changed return a warning */ - if (qStatusOnEntry != qStatusOnExit) - { - return IX_QMGR_WARNING; - } - - return IX_SUCCESS; -} - - -IX_STATUS -ixQMgrNotificationDisable (IxQMgrQId qId) -{ - int ixQMgrLockKey; - -#ifndef NDEBUG - /* Validate parameters */ - if (!ixQMgrQIsConfigured (qId)) - { - return IX_QMGR_Q_NOT_CONFIGURED; - } -#endif - - /* - * Enabling interrupts results in Read-Modify-Write - * so need critical section - */ -#ifndef NDEBUG - dispatcherStats.queueStats[qId].notificationEnabled = false; -#endif - - ixQMgrLockKey = ixOsalIrqLock(); - - ixQMgrAqmIfQInterruptDisable (qId); - - ixOsalIrqUnlock(ixQMgrLockKey); - - return IX_SUCCESS; -} - -void -ixQMgrStickyInterruptRegEnable(void) -{ - /* Use Aqm If function to set Interrupt Register0 Bit-3 */ - ixQMgrAqmIfIntSrcSelReg0Bit3Set (); -} - -#if !defined __XSCALE__ || defined __linux - -/* Count the number of leading zero bits in a word, - * and return the same value than the CLZ instruction. - * - * word (in) return value (out) - * 0x80000000 0 - * 0x40000000 1 - * ,,, ,,, - * 0x00000002 30 - * 0x00000001 31 - * 0x00000000 32 - * - * The C version of this function is used as a replacement - * for system not providing the equivalent of the CLZ - * assembly language instruction. - * - * Note that this version is big-endian - */ -unsigned int -ixQMgrCountLeadingZeros(UINT32 word) -{ - unsigned int leadingZerosCount = 0; - - if (word == 0) - { - return 32; - } - /* search the first bit set by testing the MSB and shifting the input word */ - while ((word & 0x80000000) == 0) - { - word <<= 1; - leadingZerosCount++; - } - return leadingZerosCount; -} -#endif /* not __XSCALE__ or __linux */ - -void -ixQMgrDispatcherLoopGet (IxQMgrDispatcherFuncPtr *qDispatcherFuncPtr) -{ - IxFeatureCtrlProductId productId = 0; - IxFeatureCtrlDeviceId deviceId = 0; - - /* Get the device ID for the underlying silicon */ - deviceId = ixFeatureCtrlDeviceRead(); - - /* Get the product ID for the underlying silicon */ - productId = ixFeatureCtrlProductIdRead (); - - /* IF (IXP42X AND A0 silicon) -> use ixQMgrDispatcherLoopRunA0 */ - if ((IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X == - (IX_FEATURE_CTRL_DEVICE_TYPE_MASK & deviceId)) && - (IX_FEATURE_CTRL_SILICON_TYPE_A0 == - (IX_FEATURE_CTRL_SILICON_STEPPING_MASK & productId))) - { - /*For IXP42X A0 silicon */ - *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunA0 ; - } - else /*For IXP42X B0 or IXP46X silicon*/ - { - if (IX_FEATURE_CTRL_SWCONFIG_ENABLED == ixQMgrOrigB0Dispatcher) - { - /* Default for IXP42X B0 and IXP46X silicon */ - *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunB0; - } - else - { - /* FeatureCtrl indicated that livelock dispatcher be used */ - *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunB0LLP; - } - } -} - -void -ixQMgrDispatcherLoopRunA0 (IxQMgrDispatchGroup group) -{ - UINT32 intRegVal; /* Interrupt reg val */ - UINT32 intRegValAfterWrite; /* Interrupt reg val after writing back */ - UINT32 intRegCheckMask; /* Mask for checking interrupt bits */ - UINT32 qStatusWordsB4Write[MAX_Q_STATUS_WORDS]; /* Status b4 interrupt write */ - UINT32 qStatusWordsAfterWrite[MAX_Q_STATUS_WORDS]; /* Status after interrupt write */ - IxQMgrQInfo *currDispatchQInfo; - BOOL statusChangeFlag; - - int priorityTableIndex;/* Priority table index */ - int qIndex; /* Current queue being processed */ - int endIndex; /* Index of last queue to process */ - -#ifndef NDEBUG - IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) || - (group == IX_QMGR_QUELOW_GROUP)); -#endif - - /* Read Q status registers before interrupt status read/write */ - ixQMgrAqmIfQStatusRegsRead (group, qStatusWordsB4Write); - - /* Read the interrupt register */ - ixQMgrAqmIfQInterruptRegRead (group, &intRegVal); - - /* No bit set : nothing to process (the reaminder of the algorithm is - * based on the fact that the interrupt register value contains at - * least one bit set - */ - if (intRegVal == 0) - { -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.loopRunCnt++; -#endif - - /* Rebuild the priority table if needed */ - if (rebuildTable) - { - ixQMgrDispatcherReBuildPriorityTable (); - } - - return; - } - - /* Write it back to clear the interrupt */ - ixQMgrAqmIfQInterruptRegWrite (group, intRegVal); - - /* Read Q status registers after interrupt status read/write */ - ixQMgrAqmIfQStatusRegsRead (group, qStatusWordsAfterWrite); - - /* get the first queue Id from the interrupt register value */ - qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal); - - /* check if any change occured during hw register modifications */ - if (IX_QMGR_QUELOW_GROUP == group) - { - statusChangeFlag = - (qStatusWordsB4Write[0] != qStatusWordsAfterWrite[0]) || - (qStatusWordsB4Write[1] != qStatusWordsAfterWrite[1]) || - (qStatusWordsB4Write[2] != qStatusWordsAfterWrite[2]) || - (qStatusWordsB4Write[3] != qStatusWordsAfterWrite[3]); - } - else - { - statusChangeFlag = - (qStatusWordsB4Write[0] != qStatusWordsAfterWrite[0]); - /* Set the queue range based on the queue group to proccess */ - qIndex += IX_QMGR_MIN_QUEUPP_QID; - } - - if (statusChangeFlag == false) - { - /* check if the interrupt register contains - * only 1 bit set (happy day scenario) - */ - currDispatchQInfo = &dispatchQInfo[qIndex]; - if (intRegVal == currDispatchQInfo->intRegCheckMask) - { - /* only 1 queue event triggered a notification * - * Call the callback function for this queue - */ - currDispatchQInfo->callback (qIndex, - currDispatchQInfo->callbackId); -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.queueStats[qIndex].callbackCnt++; -#endif - } - else - { - /* the event is triggered by more than 1 queue, - * the queue search will be starting from the beginning - * or the middle of the priority table - * - * the serach will end when all the bits of the interrupt - * register are cleared. There is no need to maintain - * a seperate value and test it at each iteration. - */ - if (IX_QMGR_QUELOW_GROUP == group) - { - /* check if any bit related to queues in the first - * half of the priority table is set - */ - if (intRegVal & lowPriorityTableFirstHalfMask) - { - priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; - } - else - { - priorityTableIndex = IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX; - } - } - else - { - /* check if any bit related to queues in the first - * half of the priority table is set - */ - if (intRegVal & uppPriorityTableFirstHalfMask) - { - priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; - } - else - { - priorityTableIndex = IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX; - } - } - - /* iterate following the priority table until all the bits - * of the interrupt register are cleared. - */ - do - { - qIndex = priorityTable[priorityTableIndex++]; - currDispatchQInfo = &dispatchQInfo[qIndex]; - intRegCheckMask = currDispatchQInfo->intRegCheckMask; - - /* If this queue caused this interrupt to be raised */ - if (intRegVal & intRegCheckMask) - { - /* Call the callback function for this queue */ - currDispatchQInfo->callback (qIndex, - currDispatchQInfo->callbackId); -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.queueStats[qIndex].callbackCnt++; -#endif - - /* Clear the interrupt register bit */ - intRegVal &= ~intRegCheckMask; - } - } - while(intRegVal); - } - } - else - { - /* A change in queue status occured during the hw interrupt - * register update. To maintain the interrupt consistency, it - * is necessary to iterate through all queues of the queue group. - */ - - /* Read interrupt status again */ - ixQMgrAqmIfQInterruptRegRead (group, &intRegValAfterWrite); - - if (IX_QMGR_QUELOW_GROUP == group) - { - priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; - endIndex = IX_QMGR_MAX_LOW_QUE_PRIORITY_TABLE_INDEX; - } - else - { - priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; - endIndex = IX_QMGR_MAX_UPP_QUE_PRIORITY_TABLE_INDEX; - } - - for ( ; priorityTableIndex<=endIndex; priorityTableIndex++) - { - qIndex = priorityTable[priorityTableIndex]; - currDispatchQInfo = &dispatchQInfo[qIndex]; - intRegCheckMask = currDispatchQInfo->intRegCheckMask; - - /* If this queue caused this interrupt to be raised */ - if (intRegVal & intRegCheckMask) - { - /* Call the callback function for this queue */ - currDispatchQInfo->callback (qIndex, - currDispatchQInfo->callbackId); -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.queueStats[qIndex].callbackCnt++; -#endif - - } /* if (intRegVal .. */ - - /* - * If interrupt bit is set in intRegValAfterWrite don't - * proceed as this will be caught in next interrupt - */ - else if ((intRegValAfterWrite & intRegCheckMask) == 0) - { - /* Check if an interrupt was lost for this Q */ - if (ixQMgrAqmIfQStatusCheck(qStatusWordsB4Write, - qStatusWordsAfterWrite, - currDispatchQInfo->statusWordOffset, - currDispatchQInfo->statusCheckValue, - currDispatchQInfo->statusMask)) - { - /* Call the callback function for this queue */ - currDispatchQInfo->callback (qIndex, - dispatchQInfo[qIndex].callbackId); -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.queueStats[qIndex].callbackCnt++; - dispatcherStats.queueStats[qIndex].intLostCallbackCnt++; -#endif - } /* if ixQMgrAqmIfQStatusCheck(.. */ - } /* else if ((intRegValAfterWrite ... */ - } /* for (priorityTableIndex=0 ... */ - } - - /* Rebuild the priority table if needed */ - if (rebuildTable) - { - ixQMgrDispatcherReBuildPriorityTable (); - } - -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.loopRunCnt++; -#endif -} - - - -void -ixQMgrDispatcherLoopRunB0 (IxQMgrDispatchGroup group) -{ - UINT32 intRegVal; /* Interrupt reg val */ - UINT32 intRegCheckMask; /* Mask for checking interrupt bits */ - IxQMgrQInfo *currDispatchQInfo; - - - int priorityTableIndex; /* Priority table index */ - int qIndex; /* Current queue being processed */ - -#ifndef NDEBUG - IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) || - (group == IX_QMGR_QUELOW_GROUP)); - IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) || - (group == IX_QMGR_QUELOW_GROUP)); -#endif - - /* Read the interrupt register */ - ixQMgrAqmIfQInterruptRegRead (group, &intRegVal); - - - /* No queue has interrupt register set */ - if (intRegVal != 0) - { - - /* Write it back to clear the interrupt */ - ixQMgrAqmIfQInterruptRegWrite (group, intRegVal); - - /* get the first queue Id from the interrupt register value */ - qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal); - - if (IX_QMGR_QUEUPP_GROUP == group) - { - /* Set the queue range based on the queue group to proccess */ - qIndex += IX_QMGR_MIN_QUEUPP_QID; - } - - /* check if the interrupt register contains - * only 1 bit set - * For example: - * intRegVal = 0x0010 - * currDispatchQInfo->intRegCheckMask = 0x0010 - * intRegVal == currDispatchQInfo->intRegCheckMask is true. - */ - currDispatchQInfo = &dispatchQInfo[qIndex]; - if (intRegVal == currDispatchQInfo->intRegCheckMask) - { - /* only 1 queue event triggered a notification * - * Call the callback function for this queue - */ - currDispatchQInfo->callback (qIndex, - currDispatchQInfo->callbackId); -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.queueStats[qIndex].callbackCnt++; -#endif - } - else - { - /* the event is triggered by more than 1 queue, - * the queue search will be starting from the beginning - * or the middle of the priority table - * - * the serach will end when all the bits of the interrupt - * register are cleared. There is no need to maintain - * a seperate value and test it at each iteration. - */ - if (IX_QMGR_QUELOW_GROUP == group) - { - /* check if any bit related to queues in the first - * half of the priority table is set - */ - if (intRegVal & lowPriorityTableFirstHalfMask) - { - priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; - } - else - { - priorityTableIndex = IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX; - } - } - else - { - /* check if any bit related to queues in the first - * half of the priority table is set - */ - if (intRegVal & uppPriorityTableFirstHalfMask) - { - priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; - } - else - { - priorityTableIndex = IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX; - } - } - - /* iterate following the priority table until all the bits - * of the interrupt register are cleared. - */ - do - { - qIndex = priorityTable[priorityTableIndex++]; - currDispatchQInfo = &dispatchQInfo[qIndex]; - intRegCheckMask = currDispatchQInfo->intRegCheckMask; - - /* If this queue caused this interrupt to be raised */ - if (intRegVal & intRegCheckMask) - { - /* Call the callback function for this queue */ - currDispatchQInfo->callback (qIndex, - currDispatchQInfo->callbackId); -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.queueStats[qIndex].callbackCnt++; -#endif - - /* Clear the interrupt register bit */ - intRegVal &= ~intRegCheckMask; - } - } - while(intRegVal); - } /*End of intRegVal == currDispatchQInfo->intRegCheckMask */ - } /* End of intRegVal != 0 */ - -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.loopRunCnt++; -#endif - - /* Rebuild the priority table if needed */ - if (rebuildTable) - { - ixQMgrDispatcherReBuildPriorityTable (); - } -} - -void -ixQMgrDispatcherLoopRunB0LLP (IxQMgrDispatchGroup group) -{ - UINT32 intRegVal =0; /* Interrupt reg val */ - UINT32 intRegCheckMask; /* Mask for checking interrupt bits */ - IxQMgrQInfo *currDispatchQInfo; - - int priorityTableIndex; /* Priority table index */ - int qIndex; /* Current queue being processed */ - - UINT32 intRegValCopy = 0; - UINT32 intEnableRegVal = 0; - UINT8 i = 0; - -#ifndef NDEBUG - IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) || - (group == IX_QMGR_QUELOW_GROUP)); -#endif - - /* Read the interrupt register */ - ixQMgrAqmIfQInterruptRegRead (group, &intRegVal); - - /* - * mask any interrupts that are not enabled - */ - ixQMgrAqmIfQInterruptEnableRegRead (group, &intEnableRegVal); - intRegVal &= intEnableRegVal; - - /* No queue has interrupt register set */ - if (intRegVal != 0) - { - if (IX_QMGR_QUELOW_GROUP == group) - { - /* - * As the sticky bit is set, the interrupt register will - * not clear if write back at this point because the condition - * has not been cleared. Take a copy and write back later after - * the condition has been cleared - */ - intRegValCopy = intRegVal; - } - else - { - /* no sticky for upper Q's, so write back now */ - ixQMgrAqmIfQInterruptRegWrite (group, intRegVal); - } - - /* get the first queue Id from the interrupt register value */ - qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal); - - if (IX_QMGR_QUEUPP_GROUP == group) - { - /* Set the queue range based on the queue group to proccess */ - qIndex += IX_QMGR_MIN_QUEUPP_QID; - } - - /* check if the interrupt register contains - * only 1 bit set - * For example: - * intRegVal = 0x0010 - * currDispatchQInfo->intRegCheckMask = 0x0010 - * intRegVal == currDispatchQInfo->intRegCheckMask is true. - */ - currDispatchQInfo = &dispatchQInfo[qIndex]; - if (intRegVal == currDispatchQInfo->intRegCheckMask) - { - - /* - * check if Q type periodic - only lower queues can - * have there type set to periodic - */ - if (IX_QMGR_TYPE_REALTIME_PERIODIC == ixQMgrQTypes[qIndex]) - { - /* - * Disable the notifications on any sporadics - */ - for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++) - { - if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrQTypes[i]) - { - ixQMgrNotificationDisable(i); -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.queueStats[i].disableCount++; -#endif - } - } - } - - currDispatchQInfo->callback (qIndex, - currDispatchQInfo->callbackId); -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.queueStats[qIndex].callbackCnt++; -#endif - } - else - { - /* the event is triggered by more than 1 queue, - * the queue search will be starting from the beginning - * or the middle of the priority table - * - * the serach will end when all the bits of the interrupt - * register are cleared. There is no need to maintain - * a seperate value and test it at each iteration. - */ - if (IX_QMGR_QUELOW_GROUP == group) - { - /* check if any bit related to queues in the first - * half of the priority table is set - */ - if (intRegVal & lowPriorityTableFirstHalfMask) - { - priorityTableIndex = - IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; - } - else - { - priorityTableIndex = - IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX; - } - } - else - { - /* check if any bit related to queues in the first - * half of the priority table is set - */ - if (intRegVal & uppPriorityTableFirstHalfMask) - { - priorityTableIndex = - IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; - } - else - { - priorityTableIndex = - IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX; - } - } - - /* iterate following the priority table until all the bits - * of the interrupt register are cleared. - */ - do - { - qIndex = priorityTable[priorityTableIndex++]; - currDispatchQInfo = &dispatchQInfo[qIndex]; - intRegCheckMask = currDispatchQInfo->intRegCheckMask; - - /* If this queue caused this interrupt to be raised */ - if (intRegVal & intRegCheckMask) - { - /* - * check if Q type periodic - only lower queues can - * have there type set to periodic. There can only be one - * periodic queue, so the sporadics are only disabled once. - */ - if (IX_QMGR_TYPE_REALTIME_PERIODIC == ixQMgrQTypes[qIndex]) - { - /* - * Disable the notifications on any sporadics - */ - for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++) - { - if (IX_QMGR_TYPE_REALTIME_SPORADIC == - ixQMgrQTypes[i]) - { - ixQMgrNotificationDisable(i); - /* - * remove from intRegVal as we don't want - * to service any sporadics now - */ - intRegVal &= ~dispatchQInfo[i].intRegCheckMask; -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.queueStats[i].disableCount++; -#endif - } - } - } - - currDispatchQInfo->callback (qIndex, - currDispatchQInfo->callbackId); -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.queueStats[qIndex].callbackCnt++; -#endif - /* Clear the interrupt register bit */ - intRegVal &= ~intRegCheckMask; - } - } - while(intRegVal); - } /*End of intRegVal == currDispatchQInfo->intRegCheckMask */ - } /* End of intRegVal != 0 */ - -#ifndef NDEBUG - /* Update statistics */ - dispatcherStats.loopRunCnt++; -#endif - - if ((intRegValCopy != 0) && (IX_QMGR_QUELOW_GROUP == group)) - { - /* - * lower groups (therefore sticky) AND at least one enabled interrupt - * Write back to clear the interrupt - */ - ixQMgrAqmIfQInterruptRegWrite (IX_QMGR_QUELOW_GROUP, intRegValCopy); - } - - /* Rebuild the priority table if needed */ - if (rebuildTable) - { - ixQMgrDispatcherReBuildPriorityTable (); - } -} - -PRIVATE void -ixQMgrDispatcherReBuildPriorityTable (void) -{ - UINT32 qIndex; - UINT32 priority; - int lowQuePriorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; - int uppQuePriorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; - - /* Reset the rebuild flag */ - rebuildTable = false; - - /* initialize the mak used to identify the queues in the first half - * of the priority table - */ - lowPriorityTableFirstHalfMask = 0; - uppPriorityTableFirstHalfMask = 0; - - /* For each priority level */ - for(priority=0; priority dummyCallback: qId (%d), callbackId (%d)\n",qId,cbId); - } - dispatchQInfo[qId].dummyCallbackCount++; - -#ifndef NDEBUG - /* Update statistcs */ - dispatcherStats.queueStats[qId].intNoCallbackCnt++; -#endif -} -void -ixQMgrLLPShow (int resetStats) -{ -#ifndef NDEBUG - UINT8 i = 0; - UINT32 intEnableRegVal = 0; - - printf ("Livelock statistics are printed on the fly.\n"); - printf ("qId Type EnableCnt DisableCnt IntEnableState Callbacks\n"); - printf ("=== ======== ========= ========== ============== =========\n"); - - for (i=0; i<= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++) - { - if (ixQMgrQTypes[i] != IX_QMGR_TYPE_REALTIME_OTHER) - { - printf (" %2d ", i); - - if (ixQMgrQTypes[i] == IX_QMGR_TYPE_REALTIME_SPORADIC) - { - printf ("Sporadic"); - } - else - { - printf ("Periodic"); - } - - - ixQMgrAqmIfQInterruptEnableRegRead (IX_QMGR_QUELOW_GROUP, - &intEnableRegVal); - - - intEnableRegVal &= dispatchQInfo[i].intRegCheckMask; - intEnableRegVal = intEnableRegVal >> i; - - printf (" %10d %10d %10d %10d\n", - dispatcherStats.queueStats[i].enableCount, - dispatcherStats.queueStats[i].disableCount, - intEnableRegVal, - dispatcherStats.queueStats[i].callbackCnt); - - if (resetStats) - { - dispatcherStats.queueStats[i].enableCount = - dispatcherStats.queueStats[i].disableCount = - dispatcherStats.queueStats[i].callbackCnt = 0; - } - } - } -#else - IX_QMGR_LOG0("Livelock Prevention statistics are only collected in debug mode\n"); -#endif -} - -void -ixQMgrPeriodicDone (void) -{ - UINT32 i = 0; - UINT32 ixQMgrLockKey = 0; - - /* - * for the lower queues - */ - for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++) - { - /* - * check for sporadics - */ - if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrQTypes[i]) - { - /* - * enable any sporadics - */ - ixQMgrLockKey = ixOsalIrqLock(); - ixQMgrAqmIfQInterruptEnable(i); - ixOsalIrqUnlock(ixQMgrLockKey); -#ifndef NDEBUG - /* - * Update statistics - */ - dispatcherStats.queueStats[i].enableCount++; - dispatcherStats.queueStats[i].notificationEnabled = true; -#endif - } - } -} -IX_STATUS -ixQMgrCallbackTypeSet (IxQMgrQId qId, - IxQMgrType type) -{ - UINT32 ixQMgrLockKey = 0; - IxQMgrType ixQMgrOldType =0; - -#ifndef NDEBUG - if (!ixQMgrQIsConfigured(qId)) - { - return IX_QMGR_Q_NOT_CONFIGURED; - } - if (qId >= IX_QMGR_MIN_QUEUPP_QID) - { - return IX_QMGR_PARAMETER_ERROR; - } - if(!IX_QMGR_DISPATCHER_CALLBACK_TYPE_CHECK(type)) - { - return IX_QMGR_PARAMETER_ERROR; - } -#endif - - ixQMgrOldType = ixQMgrQTypes[qId]; - ixQMgrQTypes[qId] = type; - - /* - * check if Q has been changed from type SPORADIC - */ - if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrOldType) - { - /* - * previously Q was a SPORADIC, this means that LLP - * might have had it disabled. enable it now. - */ - ixQMgrLockKey = ixOsalIrqLock(); - ixQMgrAqmIfQInterruptEnable(qId); - ixOsalIrqUnlock(ixQMgrLockKey); - -#ifndef NDEBUG - /* - * Update statistics - */ - dispatcherStats.queueStats[qId].enableCount++; -#endif - } - - return IX_SUCCESS; -} - -IX_STATUS -ixQMgrCallbackTypeGet (IxQMgrQId qId, - IxQMgrType *type) -{ -#ifndef NDEBUG - if (!ixQMgrQIsConfigured(qId)) - { - return IX_QMGR_Q_NOT_CONFIGURED; - } - if (qId >= IX_QMGR_MIN_QUEUPP_QID) - { - return IX_QMGR_PARAMETER_ERROR; - } - if(type == NULL) - { - return IX_QMGR_PARAMETER_ERROR; - } -#endif - - *type = ixQMgrQTypes[qId]; - return IX_SUCCESS; -} diff --git a/drivers/net/npe/IxQMgrInit.c b/drivers/net/npe/IxQMgrInit.c deleted file mode 100644 index 14687e61af..0000000000 --- a/drivers/net/npe/IxQMgrInit.c +++ /dev/null @@ -1,209 +0,0 @@ -/** - * @file IxQMgrInit.c - * - * @author Intel Corporation - * @date 30-Oct-2001 - * - * @brief: Provided initialization of the QMgr component and its subcomponents. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/* - * System defined include files. - */ - -/* - * User defined include files. - */ -#include "IxOsal.h" -#include "IxQMgr.h" -#include "IxQMgrQCfg_p.h" -#include "IxQMgrDispatcher_p.h" -#include "IxQMgrLog_p.h" -#include "IxQMgrQAccess_p.h" -#include "IxQMgrDefines_p.h" -#include "IxQMgrAqmIf_p.h" - -/* - * Set to true if initialized - * N.B. global so integration/unit tests can reinitialize - */ -BOOL qMgrIsInitialized = false; - -/* - * Function definitions. - */ -IX_STATUS -ixQMgrInit (void) -{ - if (qMgrIsInitialized) - { - IX_QMGR_LOG0("ixQMgrInit: IxQMgr already initialised\n"); - return IX_FAIL; - } - - /* Initialise the QCfg component */ - ixQMgrQCfgInit (); - - /* Initialise the Dispatcher component */ - ixQMgrDispatcherInit (); - - /* Initialise the Access component */ - ixQMgrQAccessInit (); - - /* Initialization complete */ - qMgrIsInitialized = true; - - return IX_SUCCESS; -} - -IX_STATUS -ixQMgrUnload (void) -{ - if (!qMgrIsInitialized) - { - return IX_FAIL; - } - - /* Uninitialise the QCfg component */ - ixQMgrQCfgUninit (); - - /* Uninitialization complete */ - qMgrIsInitialized = false; - - return IX_SUCCESS; -} - -void -ixQMgrShow (void) -{ - IxQMgrQCfgStats *qCfgStats = NULL; - IxQMgrDispatcherStats *dispatcherStats = NULL; - int i; - UINT32 lowIntRegRead, upIntRegRead; - - qCfgStats = ixQMgrQCfgStatsGet (); - dispatcherStats = ixQMgrDispatcherStatsGet (); - ixQMgrAqmIfQInterruptRegRead (IX_QMGR_QUELOW_GROUP, &lowIntRegRead); - ixQMgrAqmIfQInterruptRegRead (IX_QMGR_QUEUPP_GROUP, &upIntRegRead); - printf("Generic Stats........\n"); - printf("=====================\n"); - printf("Loop Run Count..........%u\n",dispatcherStats->loopRunCnt); - printf("Watermark set count.....%d\n", qCfgStats->wmSetCnt); - printf("===========================================\n"); - printf("On the fly Interrupt Register Stats........\n"); - printf("===========================================\n"); - printf("Lower Interrupt Register............0x%08x\n",lowIntRegRead); - printf("Upper Interrupt Register............0x%08x\n",upIntRegRead); - printf("==============================================\n"); - printf("Queue Specific Stats........\n"); - printf("============================\n"); - - for (i=0; iqStats[qId].qName); - printf(" Size in words............ %u\n", qCfgStats->qStats[qId].qSizeInWords); - printf(" Entry size in words...... %u\n", qCfgStats->qStats[qId].qEntrySizeInWords); - printf(" Nearly empty watermark... %u\n", qCfgStats->qStats[qId].ne); - printf(" Nearly full watermark.... %u\n", qCfgStats->qStats[qId].nf); - printf(" Number of full entries... %u\n", qCfgStats->qStats[qId].numEntries); - printf(" Sram base address........ 0x%X\n", qCfgStats->qStats[qId].baseAddress); - printf(" Read pointer............. 0x%X\n", qCfgStats->qStats[qId].readPtr); - printf(" Write pointer............ 0x%X\n", qCfgStats->qStats[qId].writePtr); - -#ifndef NDEBUG - if (dispatcherStats->queueStats[qId].notificationEnabled) - { - char *localEvent = "none ????"; - switch (dispatcherStats->queueStats[qId].srcSel) - { - case IX_QMGR_Q_SOURCE_ID_E: - localEvent = "Empty"; - break; - case IX_QMGR_Q_SOURCE_ID_NE: - localEvent = "Nearly Empty"; - break; - case IX_QMGR_Q_SOURCE_ID_NF: - localEvent = "Nearly Full"; - break; - case IX_QMGR_Q_SOURCE_ID_F: - localEvent = "Full"; - break; - case IX_QMGR_Q_SOURCE_ID_NOT_E: - localEvent = "Not Empty"; - break; - case IX_QMGR_Q_SOURCE_ID_NOT_NE: - localEvent = "Not Nearly Empty"; - break; - case IX_QMGR_Q_SOURCE_ID_NOT_NF: - localEvent = "Not Nearly Full"; - break; - case IX_QMGR_Q_SOURCE_ID_NOT_F: - localEvent = "Not Full"; - break; - default : - break; - } - printf(" Notifications localEvent...... %s\n", localEvent); - } - else - { - printf(" Notifications............ not enabled\n"); - } - printf(" IxQMgrDispatcher Stats\n"); - printf(" Callback count................%d\n", - dispatcherStats->queueStats[qId].callbackCnt); - printf(" Priority change count.........%d\n", - dispatcherStats->queueStats[qId].priorityChangeCnt); - printf(" Interrupt no callback count...%d\n", - dispatcherStats->queueStats[qId].intNoCallbackCnt); - printf(" Interrupt lost callback count...%d\n", - dispatcherStats->queueStats[qId].intLostCallbackCnt); -#endif - - return IX_SUCCESS; -} - - - - diff --git a/drivers/net/npe/IxQMgrQAccess.c b/drivers/net/npe/IxQMgrQAccess.c deleted file mode 100644 index 13ee0f4f11..0000000000 --- a/drivers/net/npe/IxQMgrQAccess.c +++ /dev/null @@ -1,772 +0,0 @@ -/** - * @file IxQMgrQAccess.c - * - * @author Intel Corporation - * @date 30-Oct-2001 - * - * @brief This file contains functions for putting entries on a queue and - * removing entries from a queue. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/* - * Inlines are compiled as function when this is defined. - * N.B. Must be placed before #include of "IxQMgr.h" - */ -#ifndef IXQMGR_H -# define IXQMGRQACCESS_C -#else -# error -#endif - -/* - * System defined include files. - */ - -/* - * User defined include files. - */ -#include "IxQMgr.h" -#include "IxQMgrAqmIf_p.h" -#include "IxQMgrQAccess_p.h" -#include "IxQMgrQCfg_p.h" -#include "IxQMgrDefines_p.h" - -/* - * Global variables and extern definitions - */ -extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; - -/* - * Function definitions. - */ -void -ixQMgrQAccessInit (void) -{ -} - -IX_STATUS -ixQMgrQReadWithChecks (IxQMgrQId qId, - UINT32 *entry) -{ - IxQMgrQEntrySizeInWords entrySizeInWords; - IxQMgrQInlinedReadWriteInfo *infoPtr; - - if (NULL == entry) - { - return IX_QMGR_PARAMETER_ERROR; - } - - /* Check QId */ - if (!ixQMgrQIsConfigured(qId)) - { - return IX_QMGR_Q_NOT_CONFIGURED; - } - - /* Get the q entry size in words */ - entrySizeInWords = ixQMgrQEntrySizeInWordsGet (qId); - - ixQMgrAqmIfQPop (qId, entrySizeInWords, entry); - - /* reset the current read count if the counter wrapped around - * (unsigned arithmetic) - */ - infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; - if (infoPtr->qReadCount-- > infoPtr->qSizeInEntries) - { - infoPtr->qReadCount = 0; - } - - /* Check if underflow occurred on the read */ - if (ixQMgrAqmIfUnderflowCheck (qId)) - { - return IX_QMGR_Q_UNDERFLOW; - } - - return IX_SUCCESS; -} - -/* this function reads the remaining of the q entry - * for queues configured with many words. - * (the first word of the entry is already read - * in the inlined function and the entry pointer already - * incremented - */ -IX_STATUS -ixQMgrQReadMWordsMinus1 (IxQMgrQId qId, - UINT32 *entry) -{ - IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; - UINT32 entrySize = infoPtr->qEntrySizeInWords; - volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr; - - while (--entrySize) - { - /* read the entry and accumulate the result */ - *(++entry) = IX_OSAL_READ_LONG(++qAccRegAddr); - } - /* underflow is available for lower queues only */ - if (qId < IX_QMGR_MIN_QUEUPP_QID) - { - /* get the queue status */ - UINT32 status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr); - - /* check the underflow status */ - if (status & infoPtr->qUflowStatBitMask) - { - /* the queue is empty - * clear the underflow status bit if it was set - */ - IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr, - status & ~infoPtr->qUflowStatBitMask); - return IX_QMGR_Q_UNDERFLOW; - } - } - return IX_SUCCESS; -} - -IX_STATUS -ixQMgrQWriteWithChecks (IxQMgrQId qId, - UINT32 *entry) -{ - IxQMgrQEntrySizeInWords entrySizeInWords; - IxQMgrQInlinedReadWriteInfo *infoPtr; - - if (NULL == entry) - { - return IX_QMGR_PARAMETER_ERROR; - } - - /* Check QId */ - if (!ixQMgrQIsConfigured(qId)) - { - return IX_QMGR_Q_NOT_CONFIGURED; - } - - /* Get the q entry size in words */ - entrySizeInWords = ixQMgrQEntrySizeInWordsGet (qId); - - ixQMgrAqmIfQPush (qId, entrySizeInWords, entry); - - /* reset the current read count if the counter wrapped around - * (unsigned arithmetic) - */ - infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; - if (infoPtr->qWriteCount++ >= infoPtr->qSizeInEntries) - { - infoPtr->qWriteCount = infoPtr->qSizeInEntries; - } - - /* Check if overflow occurred on the write*/ - if (ixQMgrAqmIfOverflowCheck (qId)) - { - return IX_QMGR_Q_OVERFLOW; - } - - return IX_SUCCESS; -} - -IX_STATUS -ixQMgrQPeek (IxQMgrQId qId, - unsigned int entryIndex, - UINT32 *entry) -{ - unsigned int numEntries; - -#ifndef NDEBUG - if ((NULL == entry) || (entryIndex >= IX_QMGR_Q_SIZE_INVALID)) - { - return IX_QMGR_PARAMETER_ERROR; - } - - if (!ixQMgrQIsConfigured(qId)) - { - return IX_QMGR_Q_NOT_CONFIGURED; - } -#endif - - if (IX_SUCCESS != ixQMgrQNumEntriesGet (qId, &numEntries)) - { - return IX_FAIL; - } - - if (entryIndex >= numEntries) /* entryIndex starts at 0 */ - { - return IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS; - } - - return ixQMgrAqmIfQPeek (qId, entryIndex, entry); -} - -IX_STATUS -ixQMgrQPoke (IxQMgrQId qId, - unsigned entryIndex, - UINT32 *entry) -{ - unsigned int numEntries; - -#ifndef NDEBUG - if ((NULL == entry) || (entryIndex > 128)) - { - return IX_QMGR_PARAMETER_ERROR; - } - - if (!ixQMgrQIsConfigured(qId)) - { - return IX_QMGR_Q_NOT_CONFIGURED; - } -#endif - - if (IX_SUCCESS != ixQMgrQNumEntriesGet (qId, &numEntries)) - { - return IX_FAIL; - } - - if (numEntries < (entryIndex + 1)) /* entryIndex starts at 0 */ - { - return IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS; - } - - return ixQMgrAqmIfQPoke (qId, entryIndex, entry); -} - -IX_STATUS -ixQMgrQStatusGetWithChecks (IxQMgrQId qId, - IxQMgrQStatus *qStatus) -{ - if (NULL == qStatus) - { - return IX_QMGR_PARAMETER_ERROR; - } - - if (!ixQMgrQIsConfigured (qId)) - { - return IX_QMGR_Q_NOT_CONFIGURED; - } - - ixQMgrAqmIfQueStatRead (qId, qStatus); - - return IX_SUCCESS; -} - -IX_STATUS -ixQMgrQNumEntriesGet (IxQMgrQId qId, - unsigned *numEntriesPtr) -{ - UINT32 qPtrs; - UINT32 qStatus; - unsigned numEntries; - IxQMgrQInlinedReadWriteInfo *infoPtr; - - -#ifndef NDEBUG - if (NULL == numEntriesPtr) - { - return IX_QMGR_PARAMETER_ERROR; - } - - /* Check QId */ - if (!ixQMgrQIsConfigured(qId)) - { - return IX_QMGR_Q_NOT_CONFIGURED; - } -#endif - - /* get fast access data */ - infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; - - /* get snapshot */ - qPtrs = IX_OSAL_READ_LONG(infoPtr->qConfigRegAddr); - - /* Mod subtraction of pointers to get number of words in Q. */ - numEntries = (qPtrs - (qPtrs >> 7)) & 0x7f; - - if (numEntries == 0) - { - /* - * Could mean either full or empty queue - * so look at status - */ - ixQMgrAqmIfQueStatRead (qId, &qStatus); - - if (qId < IX_QMGR_MIN_QUEUPP_QID) - { - if (qStatus & IX_QMGR_Q_STATUS_E_BIT_MASK) - { - /* Empty */ - *numEntriesPtr = 0; - } - else if (qStatus & IX_QMGR_Q_STATUS_F_BIT_MASK) - { - /* Full */ - *numEntriesPtr = infoPtr->qSizeInEntries; - } - else - { - /* - * Queue status and read/write pointers are volatile. - * The queue state has changed since we took the - * snapshot of the read and write pointers. - * Client can retry if they wish - */ - *numEntriesPtr = 0; - return IX_QMGR_WARNING; - } - } - else /* It is an upper queue which does not have an empty status bit maintained */ - { - if (qStatus & IX_QMGR_Q_STATUS_F_BIT_MASK) - { - /* The queue is Full at the time of snapshot. */ - *numEntriesPtr = infoPtr->qSizeInEntries; - } - else - { - /* The queue is either empty, either moving, - * Client can retry if they wish - */ - *numEntriesPtr = 0; - return IX_QMGR_WARNING; - } - } - } - else - { - *numEntriesPtr = (numEntries / infoPtr->qEntrySizeInWords) & (infoPtr->qSizeInEntries - 1); - } - - return IX_SUCCESS; -} - -#if defined(__wince) && defined(NO_INLINE_APIS) - -PUBLIC IX_STATUS -ixQMgrQRead (IxQMgrQId qId, - UINT32 *entryPtr) -{ - extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; - IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; - UINT32 entry, entrySize; - - /* get a new entry */ - entrySize = infoPtr->qEntrySizeInWords; - entry = IX_OSAL_READ_LONG(infoPtr->qAccRegAddr); - - if (entrySize != IX_QMGR_Q_ENTRY_SIZE1) - { - *entryPtr = entry; - /* process the remaining part of the entry */ - return ixQMgrQReadMWordsMinus1(qId, entryPtr); - } - - /* underflow is available for lower queues only */ - if (qId < IX_QMGR_MIN_QUEUPP_QID) - { - /* the counter of queue entries is decremented. In happy - * day scenario there are many entries in the queue - * and the counter does not reach zero. - */ - if (infoPtr->qReadCount-- == 0) - { - /* There is maybe no entry in the queue - * qReadCount is now negative, but will be corrected before - * the function returns. - */ - UINT32 qPtrs; /* queue internal pointers */ - - /* when a queue is empty, the hw guarantees to return - * a null value. If the value is not null, the queue is - * not empty. - */ - if (entry == 0) - { - /* get the queue status */ - UINT32 status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr); - - /* check the underflow status */ - if (status & infoPtr->qUflowStatBitMask) - { - /* the queue is empty - * clear the underflow status bit if it was set - */ - IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr, - status & ~infoPtr->qUflowStatBitMask); - *entryPtr = 0; - infoPtr->qReadCount = 0; - return IX_QMGR_Q_UNDERFLOW; - } - } - /* store the result */ - *entryPtr = entry; - - /* No underflow occured : someone is filling the queue - * or the queue contains null entries. - * The current counter needs to be - * updated from the current number of entries in the queue - */ - - /* get snapshot of queue pointers */ - qPtrs = IX_OSAL_READ_LONG(infoPtr->qConfigRegAddr); - - /* Mod subtraction of pointers to get number of words in Q. */ - qPtrs = (qPtrs - (qPtrs >> 7)) & 0x7f; - - if (qPtrs == 0) - { - /* no entry in the queue */ - infoPtr->qReadCount = 0; - } - else - { - /* convert the number of words inside the queue - * to a number of entries - */ - infoPtr->qReadCount = qPtrs & (infoPtr->qSizeInEntries - 1); - } - return IX_SUCCESS; - } - } - *entryPtr = entry; - return IX_SUCCESS; -} - -PUBLIC IX_STATUS -ixQMgrQBurstRead (IxQMgrQId qId, - UINT32 numEntries, - UINT32 *entries) -{ - extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; - IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; - UINT32 nullCheckEntry; - - if (infoPtr->qEntrySizeInWords == IX_QMGR_Q_ENTRY_SIZE1) - { - volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr; - - /* the code is optimized to take care of data dependencies: - * Durig a read, there are a few cycles needed to get the - * read complete. During these cycles, it is poossible to - * do some CPU, e.g. increment pointers and decrement - * counters. - */ - - /* fetch a queue entry */ - nullCheckEntry = IX_OSAL_READ_LONG(infoPtr->qAccRegAddr); - - /* iterate the specified number of queue entries */ - while (--numEntries) - { - /* check the result of the previous read */ - if (nullCheckEntry == 0) - { - /* if we read a NULL entry, stop. We have underflowed */ - break; - } - else - { - /* write the entry */ - *entries = nullCheckEntry; - /* fetch next entry */ - nullCheckEntry = IX_OSAL_READ_LONG(qAccRegAddr); - /* increment the write address */ - entries++; - } - } - /* write the pre-fetched entry */ - *entries = nullCheckEntry; - } - else - { - IxQMgrQEntrySizeInWords entrySizeInWords = infoPtr->qEntrySizeInWords; - /* read the specified number of queue entries */ - nullCheckEntry = 0; - while (numEntries--) - { - int i; - - for (i = 0; i < entrySizeInWords; i++) - { - *entries = IX_OSAL_READ_LONG(infoPtr->qAccRegAddr + i); - nullCheckEntry |= *entries++; - } - - /* if we read a NULL entry, stop. We have underflowed */ - if (nullCheckEntry == 0) - { - break; - } - nullCheckEntry = 0; - } - } - - /* reset the current read count : next access to the read function - * will force a underflow status check - */ - infoPtr->qWriteCount = 0; - - /* Check if underflow occurred on the read */ - if (nullCheckEntry == 0 && qId < IX_QMGR_MIN_QUEUPP_QID) - { - /* get the queue status */ - UINT32 status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr); - - if (status & infoPtr->qUflowStatBitMask) - { - /* clear the underflow status bit if it was set */ - IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr, - status & ~infoPtr->qUflowStatBitMask); - return IX_QMGR_Q_UNDERFLOW; - } - } - - return IX_SUCCESS; -} - -PUBLIC IX_STATUS -ixQMgrQWrite (IxQMgrQId qId, - UINT32 *entry) -{ - extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; - IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; - UINT32 entrySize; - - /* write the entry */ - IX_OSAL_WRITE_LONG(infoPtr->qAccRegAddr, *entry); - entrySize = infoPtr->qEntrySizeInWords; - - if (entrySize != IX_QMGR_Q_ENTRY_SIZE1) - { - /* process the remaining part of the entry */ - volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr; - while (--entrySize) - { - ++entry; - IX_OSAL_WRITE_LONG(++qAccRegAddr, *entry); - } - entrySize = infoPtr->qEntrySizeInWords; - } - - /* overflow is available for lower queues only */ - if (qId < IX_QMGR_MIN_QUEUPP_QID) - { - UINT32 qSize = infoPtr->qSizeInEntries; - /* increment the current number of entries in the queue - * and check for overflow - */ - if (infoPtr->qWriteCount++ == qSize) - { - /* the queue may have overflow */ - UINT32 qPtrs; /* queue internal pointers */ - - /* get the queue status */ - UINT32 status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr); - - /* read the status twice because the status may - * not be immediately ready after the write operation - */ - if ((status & infoPtr->qOflowStatBitMask) || - ((status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr)) - & infoPtr->qOflowStatBitMask)) - { - /* the queue is full, clear the overflow status - * bit if it was set - */ - IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr, - status & ~infoPtr->qOflowStatBitMask); - infoPtr->qWriteCount = infoPtr->qSizeInEntries; - return IX_QMGR_Q_OVERFLOW; - } - /* No overflow occured : someone is draining the queue - * and the current counter needs to be - * updated from the current number of entries in the queue - */ - - /* get q pointer snapshot */ - qPtrs = IX_OSAL_READ_LONG(infoPtr->qConfigRegAddr); - - /* Mod subtraction of pointers to get number of words in Q. */ - qPtrs = (qPtrs - (qPtrs >> 7)) & 0x7f; - - if (qPtrs == 0) - { - /* the queue may be full at the time of the - * snapshot. Next access will check - * the overflow status again. - */ - infoPtr->qWriteCount = qSize; - } - else - { - /* convert the number of words to a number of entries */ - if (entrySize == IX_QMGR_Q_ENTRY_SIZE1) - { - infoPtr->qWriteCount = qPtrs & (qSize - 1); - } - else - { - infoPtr->qWriteCount = (qPtrs / entrySize) & (qSize - 1); - } - } - } - } - return IX_SUCCESS; -} - -PUBLIC IX_STATUS -ixQMgrQBurstWrite (IxQMgrQId qId, - unsigned numEntries, - UINT32 *entries) -{ - extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; - IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; - UINT32 status; - - /* update the current write count */ - infoPtr->qWriteCount += numEntries; - - if (infoPtr->qEntrySizeInWords == IX_QMGR_Q_ENTRY_SIZE1) - { - volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr; - while (numEntries--) - { - IX_OSAL_WRITE_LONG(qAccRegAddr, *entries); - entries++; - } - } - else - { - IxQMgrQEntrySizeInWords entrySizeInWords = infoPtr->qEntrySizeInWords; - int i; - - /* write each queue entry */ - while (numEntries--) - { - /* write the queueEntrySize number of words for each entry */ - for (i = 0; i < entrySizeInWords; i++) - { - IX_OSAL_WRITE_LONG((infoPtr->qAccRegAddr + i), *entries); - entries++; - } - } - } - - /* check if the write count overflows */ - if (infoPtr->qWriteCount > infoPtr->qSizeInEntries) - { - /* reset the current write count */ - infoPtr->qWriteCount = infoPtr->qSizeInEntries; - } - - /* Check if overflow occurred on the write operation */ - if (qId < IX_QMGR_MIN_QUEUPP_QID) - { - /* get the queue status */ - status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr); - - /* read the status twice because the status may - * not be ready at the time of the write - */ - if ((status & infoPtr->qOflowStatBitMask) || - ((status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr)) - & infoPtr->qOflowStatBitMask)) - { - /* clear the underflow status bit if it was set */ - IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr, - status & ~infoPtr->qOflowStatBitMask); - return IX_QMGR_Q_OVERFLOW; - } - } - - return IX_SUCCESS; -} - -PUBLIC IX_STATUS -ixQMgrQStatusGet (IxQMgrQId qId, - IxQMgrQStatus *qStatus) -{ - /* read the status of a queue in the range 0-31 */ - if (qId < IX_QMGR_MIN_QUEUPP_QID) - { - extern UINT32 ixQMgrAqmIfQueLowStatRegAddr[]; - extern UINT32 ixQMgrAqmIfQueLowStatBitsOffset[]; - extern UINT32 ixQMgrAqmIfQueLowStatBitsMask; - extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; - IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; - volatile UINT32 *lowStatRegAddr = (UINT32*)ixQMgrAqmIfQueLowStatRegAddr[qId]; - volatile UINT32 *qUOStatRegAddr = infoPtr->qUOStatRegAddr; - - UINT32 lowStatBitsOffset = ixQMgrAqmIfQueLowStatBitsOffset[qId]; - UINT32 lowStatBitsMask = ixQMgrAqmIfQueLowStatBitsMask; - UINT32 underflowBitMask = infoPtr->qUflowStatBitMask; - UINT32 overflowBitMask = infoPtr->qOflowStatBitMask; - - /* read the status register for this queue */ - *qStatus = IX_OSAL_READ_LONG(lowStatRegAddr); - /* mask out the status bits relevant only to this queue */ - *qStatus = (*qStatus >> lowStatBitsOffset) & lowStatBitsMask; - - /* Check if the queue has overflowed */ - if (IX_OSAL_READ_LONG(qUOStatRegAddr) & overflowBitMask) - { - /* clear the overflow status bit if it was set */ - IX_OSAL_WRITE_LONG(qUOStatRegAddr, - (IX_OSAL_READ_LONG(qUOStatRegAddr) & - ~overflowBitMask)); - *qStatus |= IX_QMGR_Q_STATUS_OF_BIT_MASK; - } - - /* Check if the queue has underflowed */ - if (IX_OSAL_READ_LONG(qUOStatRegAddr) & underflowBitMask) - { - /* clear the underflow status bit if it was set */ - IX_OSAL_WRITE_LONG(qUOStatRegAddr, - (IX_OSAL_READ_LONG(qUOStatRegAddr) & - ~underflowBitMask)); - *qStatus |= IX_QMGR_Q_STATUS_UF_BIT_MASK; - } - } - else /* read status of a queue in the range 32-63 */ - { - extern UINT32 ixQMgrAqmIfQueUppStat0RegAddr; - extern UINT32 ixQMgrAqmIfQueUppStat1RegAddr; - extern UINT32 ixQMgrAqmIfQueUppStat0BitMask[]; - extern UINT32 ixQMgrAqmIfQueUppStat1BitMask[]; - - volatile UINT32 *qNearEmptyStatRegAddr = (UINT32*)ixQMgrAqmIfQueUppStat0RegAddr; - volatile UINT32 *qFullStatRegAddr = (UINT32*)ixQMgrAqmIfQueUppStat1RegAddr; - int maskIndex = qId - IX_QMGR_MIN_QUEUPP_QID; - UINT32 qNearEmptyStatBitMask = ixQMgrAqmIfQueUppStat0BitMask[maskIndex]; - UINT32 qFullStatBitMask = ixQMgrAqmIfQueUppStat1BitMask[maskIndex]; - - /* Reset the status bits */ - *qStatus = 0; - - /* Check if the queue is nearly empty */ - if (IX_OSAL_READ_LONG(qNearEmptyStatRegAddr) & qNearEmptyStatBitMask) - { - *qStatus |= IX_QMGR_Q_STATUS_NE_BIT_MASK; - } - - /* Check if the queue is full */ - if (IX_OSAL_READ_LONG(qFullStatRegAddr) & qFullStatBitMask) - { - *qStatus |= IX_QMGR_Q_STATUS_F_BIT_MASK; - } - } - return IX_SUCCESS; -} -#endif /* def NO_INLINE_APIS */ diff --git a/drivers/net/npe/IxQMgrQCfg.c b/drivers/net/npe/IxQMgrQCfg.c deleted file mode 100644 index b64bb2dd90..0000000000 --- a/drivers/net/npe/IxQMgrQCfg.c +++ /dev/null @@ -1,519 +0,0 @@ -/** - * @file QMgrQCfg.c - * - * @author Intel Corporation - * @date 30-Oct-2001 - * - * @brief This modules provides an interface for setting up the static - * configuration of AQM queues.This file contains the following - * functions: - * - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/* - * System defined include files. - */ - -/* - * User defined include files. - */ -#include "IxOsal.h" -#include "IxQMgr.h" -#include "IxQMgrAqmIf_p.h" -#include "IxQMgrQCfg_p.h" -#include "IxQMgrDefines_p.h" - -/* - * #defines and macros used in this file. - */ - -#define IX_QMGR_MIN_ENTRY_SIZE_IN_WORDS 16 - -/* Total size of SRAM */ -#define IX_QMGR_AQM_SRAM_SIZE_IN_BYTES 0x4000 - -/* - * Check that qId is a valid queue identifier. This is provided to - * make the code easier to read. - */ -#define IX_QMGR_QID_IS_VALID(qId) \ -(((qId) >= (IX_QMGR_MIN_QID)) && ((qId) <= (IX_QMGR_MAX_QID))) - -/* - * Typedefs whose scope is limited to this file. - */ - -/* - * This struct describes an AQM queue. - * N.b. bufferSizeInWords and qEntrySizeInWords are stored in the queue - * as these are requested by Access in the data path. sizeInEntries is - * not required by the data path so it can be calculated dynamically. - * - */ -typedef struct -{ - char qName[IX_QMGR_MAX_QNAME_LEN+1]; /* Textual description of a queue*/ - IxQMgrQSizeInWords qSizeInWords; /* The number of words in the queue */ - IxQMgrQEntrySizeInWords qEntrySizeInWords; /* Number of words per queue entry*/ - BOOL isConfigured; /* This flag is true if the queue has - * been configured - */ -} IxQMgrCfgQ; - -/* - * Variable declarations global to this file. Externs are followed by - * statics. - */ - -extern UINT32 * ixQMgrAqmIfQueAccRegAddr[]; - -/* Store data required to inline read and write access - */ -IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[IX_QMGR_MAX_NUM_QUEUES]; - -static IxQMgrCfgQ cfgQueueInfo[IX_QMGR_MAX_NUM_QUEUES]; - -/* This pointer holds the starting address of AQM SRAM not used by - * the AQM queues. - */ -static UINT32 freeSramAddress=0; - -/* 4 words of zeroed memory for inline access */ -static UINT32 zeroedPlaceHolder[4] = { 0, 0, 0, 0 }; - -static BOOL cfgInitialized = false; - -static IxOsalMutex ixQMgrQCfgMutex; - -/* - * Statistics - */ -static IxQMgrQCfgStats stats; - -/* - * Function declarations - */ -PRIVATE BOOL -watermarkLevelIsOk (IxQMgrQId qId, IxQMgrWMLevel level); - -PRIVATE BOOL -qSizeInWordsIsOk (IxQMgrQSizeInWords qSize); - -PRIVATE BOOL -qEntrySizeInWordsIsOk (IxQMgrQEntrySizeInWords entrySize); - -/* - * Function definitions. - */ -void -ixQMgrQCfgInit (void) -{ - int loopIndex; - - for (loopIndex=0; loopIndex < IX_QMGR_MAX_NUM_QUEUES;loopIndex++) - { - /* info for code inlining */ - ixQMgrAqmIfQueAccRegAddr[loopIndex] = zeroedPlaceHolder; - - /* info for code inlining */ - ixQMgrQInlinedReadWriteInfo[loopIndex].qReadCount = 0; - ixQMgrQInlinedReadWriteInfo[loopIndex].qWriteCount = 0; - ixQMgrQInlinedReadWriteInfo[loopIndex].qAccRegAddr = zeroedPlaceHolder; - ixQMgrQInlinedReadWriteInfo[loopIndex].qUOStatRegAddr = zeroedPlaceHolder; - ixQMgrQInlinedReadWriteInfo[loopIndex].qUflowStatBitMask = 0; - ixQMgrQInlinedReadWriteInfo[loopIndex].qOflowStatBitMask = 0; - ixQMgrQInlinedReadWriteInfo[loopIndex].qEntrySizeInWords = 0; - ixQMgrQInlinedReadWriteInfo[loopIndex].qSizeInEntries = 0; - ixQMgrQInlinedReadWriteInfo[loopIndex].qConfigRegAddr = zeroedPlaceHolder; - } - - /* Initialise the AqmIf component */ - ixQMgrAqmIfInit (); - - /* Reset all queues to have queue name = NULL, entry size = 0 and - * isConfigured = false - */ - for (loopIndex=0; loopIndex < IX_QMGR_MAX_NUM_QUEUES;loopIndex++) - { - strcpy (cfgQueueInfo[loopIndex].qName, ""); - cfgQueueInfo[loopIndex].qSizeInWords = 0; - cfgQueueInfo[loopIndex].qEntrySizeInWords = 0; - cfgQueueInfo[loopIndex].isConfigured = false; - - /* Statistics */ - stats.qStats[loopIndex].isConfigured = false; - stats.qStats[loopIndex].qName = cfgQueueInfo[loopIndex].qName; - } - - /* Statistics */ - stats.wmSetCnt = 0; - - ixQMgrAqmIfSramBaseAddressGet (&freeSramAddress); - - ixOsalMutexInit(&ixQMgrQCfgMutex); - - cfgInitialized = true; -} - -void -ixQMgrQCfgUninit (void) -{ - cfgInitialized = false; - - /* Uninitialise the AqmIf component */ - ixQMgrAqmIfUninit (); -} - -IX_STATUS -ixQMgrQConfig (char *qName, - IxQMgrQId qId, - IxQMgrQSizeInWords qSizeInWords, - IxQMgrQEntrySizeInWords qEntrySizeInWords) -{ - UINT32 aqmLocalBaseAddress; - - if (!cfgInitialized) - { - return IX_FAIL; - } - - if (!IX_QMGR_QID_IS_VALID(qId)) - { - return IX_QMGR_INVALID_Q_ID; - } - - else if (NULL == qName) - { - return IX_QMGR_PARAMETER_ERROR; - } - - else if (strlen (qName) > IX_QMGR_MAX_QNAME_LEN) - { - return IX_QMGR_PARAMETER_ERROR; - } - - else if (!qSizeInWordsIsOk (qSizeInWords)) - { - return IX_QMGR_INVALID_QSIZE; - } - - else if (!qEntrySizeInWordsIsOk (qEntrySizeInWords)) - { - return IX_QMGR_INVALID_Q_ENTRY_SIZE; - } - - else if (cfgQueueInfo[qId].isConfigured) - { - return IX_QMGR_Q_ALREADY_CONFIGURED; - } - - ixOsalMutexLock(&ixQMgrQCfgMutex, IX_OSAL_WAIT_FOREVER); - - /* Write the config register */ - ixQMgrAqmIfQueCfgWrite (qId, - qSizeInWords, - qEntrySizeInWords, - freeSramAddress); - - - strcpy (cfgQueueInfo[qId].qName, qName); - cfgQueueInfo[qId].qSizeInWords = qSizeInWords; - cfgQueueInfo[qId].qEntrySizeInWords = qEntrySizeInWords; - - /* store pre-computed information in the same cache line - * to facilitate inlining of QRead and QWrite functions - * in IxQMgr.h - */ - ixQMgrQInlinedReadWriteInfo[qId].qReadCount = 0; - ixQMgrQInlinedReadWriteInfo[qId].qWriteCount = 0; - ixQMgrQInlinedReadWriteInfo[qId].qEntrySizeInWords = qEntrySizeInWords; - ixQMgrQInlinedReadWriteInfo[qId].qSizeInEntries = - (UINT32)qSizeInWords / (UINT32)qEntrySizeInWords; - - /* Calculate the new freeSramAddress from the size of the queue - * currently being configured. - */ - freeSramAddress += (qSizeInWords * IX_QMGR_NUM_BYTES_PER_WORD); - - /* Get the virtual SRAM address */ - ixQMgrAqmIfBaseAddressGet (&aqmLocalBaseAddress); - - IX_OSAL_ASSERT((freeSramAddress - (aqmLocalBaseAddress + (IX_QMGR_QUEBUFFER_SPACE_OFFSET))) <= - IX_QMGR_QUE_BUFFER_SPACE_SIZE); - - /* The queue is now configured */ - cfgQueueInfo[qId].isConfigured = true; - - ixOsalMutexUnlock(&ixQMgrQCfgMutex); - -#ifndef NDEBUG - /* Update statistics */ - stats.qStats[qId].isConfigured = true; - stats.qStats[qId].qName = cfgQueueInfo[qId].qName; -#endif - return IX_SUCCESS; -} - -IxQMgrQSizeInWords -ixQMgrQSizeInWordsGet (IxQMgrQId qId) -{ - /* No parameter checking as this is used on the data path */ - return (cfgQueueInfo[qId].qSizeInWords); -} - -IX_STATUS -ixQMgrQSizeInEntriesGet (IxQMgrQId qId, - unsigned *qSizeInEntries) -{ - if (!ixQMgrQIsConfigured(qId)) - { - return IX_QMGR_Q_NOT_CONFIGURED; - } - - if(NULL == qSizeInEntries) - { - return IX_QMGR_PARAMETER_ERROR; - } - - *qSizeInEntries = (UINT32)(cfgQueueInfo[qId].qSizeInWords) / - (UINT32)cfgQueueInfo[qId].qEntrySizeInWords; - - return IX_SUCCESS; -} - -IxQMgrQEntrySizeInWords -ixQMgrQEntrySizeInWordsGet (IxQMgrQId qId) -{ - /* No parameter checking as this is used on the data path */ - return (cfgQueueInfo[qId].qEntrySizeInWords); -} - -IX_STATUS -ixQMgrWatermarkSet (IxQMgrQId qId, - IxQMgrWMLevel ne, - IxQMgrWMLevel nf) -{ - IxQMgrQStatus qStatusOnEntry;/* The queue status on entry/exit */ - IxQMgrQStatus qStatusOnExit; /* to this function */ - - if (!ixQMgrQIsConfigured(qId)) - { - return IX_QMGR_Q_NOT_CONFIGURED; - } - - if (!watermarkLevelIsOk (qId, ne)) - { - return IX_QMGR_INVALID_Q_WM; - } - - if (!watermarkLevelIsOk (qId, nf)) - { - return IX_QMGR_INVALID_Q_WM; - } - - /* Get the current queue status */ - ixQMgrAqmIfQueStatRead (qId, &qStatusOnEntry); - -#ifndef NDEBUG - /* Update statistics */ - stats.wmSetCnt++; -#endif - - ixQMgrAqmIfWatermarkSet (qId, - ne, - nf); - - /* Get the current queue status */ - ixQMgrAqmIfQueStatRead (qId, &qStatusOnExit); - - /* If the status has changed return a warning */ - if (qStatusOnEntry != qStatusOnExit) - { - return IX_QMGR_WARNING; - } - - return IX_SUCCESS; -} - -IX_STATUS -ixQMgrAvailableSramAddressGet (UINT32 *address, - unsigned *sizeOfFreeRam) -{ - UINT32 aqmLocalBaseAddress; - - if ((NULL == address)||(NULL == sizeOfFreeRam)) - { - return IX_QMGR_PARAMETER_ERROR; - } - if (!cfgInitialized) - { - return IX_FAIL; - } - - *address = freeSramAddress; - - /* Get the virtual SRAM address */ - ixQMgrAqmIfBaseAddressGet (&aqmLocalBaseAddress); - - /* - * Calculate the size in bytes of free sram - * i.e. current free SRAM virtual pointer from - * (base + total size) - */ - *sizeOfFreeRam = - (aqmLocalBaseAddress + - IX_QMGR_AQM_SRAM_SIZE_IN_BYTES) - - freeSramAddress; - - if (0 == *sizeOfFreeRam) - { - return IX_QMGR_NO_AVAILABLE_SRAM; - } - - return IX_SUCCESS; -} - -BOOL -ixQMgrQIsConfigured (IxQMgrQId qId) -{ - if (!IX_QMGR_QID_IS_VALID(qId)) - { - return false; - } - - return cfgQueueInfo[qId].isConfigured; -} - -IxQMgrQCfgStats* -ixQMgrQCfgStatsGet (void) -{ - return &stats; -} - -IxQMgrQCfgStats* -ixQMgrQCfgQStatsGet (IxQMgrQId qId) -{ - unsigned int ne; - unsigned int nf; - UINT32 baseAddress; - UINT32 readPtr; - UINT32 writePtr; - - stats.qStats[qId].qSizeInWords = cfgQueueInfo[qId].qSizeInWords; - stats.qStats[qId].qEntrySizeInWords = cfgQueueInfo[qId].qEntrySizeInWords; - - if (IX_SUCCESS != ixQMgrQNumEntriesGet (qId, &stats.qStats[qId].numEntries)) - { - if (IX_QMGR_WARNING != ixQMgrQNumEntriesGet (qId, &stats.qStats[qId].numEntries)) - { - IX_QMGR_LOG_WARNING1("Failed to get the number of entries in queue.... %d\n", qId); - } - } - - ixQMgrAqmIfQueCfgRead (qId, - stats.qStats[qId].numEntries, - &baseAddress, - &ne, - &nf, - &readPtr, - &writePtr); - - stats.qStats[qId].baseAddress = baseAddress; - stats.qStats[qId].ne = ne; - stats.qStats[qId].nf = nf; - stats.qStats[qId].readPtr = readPtr; - stats.qStats[qId].writePtr = writePtr; - - return &stats; -} - -/* - * Static function definitions - */ - -PRIVATE BOOL -watermarkLevelIsOk (IxQMgrQId qId, IxQMgrWMLevel level) -{ - unsigned qSizeInEntries; - - switch (level) - { - case IX_QMGR_Q_WM_LEVEL0: - case IX_QMGR_Q_WM_LEVEL1: - case IX_QMGR_Q_WM_LEVEL2: - case IX_QMGR_Q_WM_LEVEL4: - case IX_QMGR_Q_WM_LEVEL8: - case IX_QMGR_Q_WM_LEVEL16: - case IX_QMGR_Q_WM_LEVEL32: - case IX_QMGR_Q_WM_LEVEL64: - break; - default: - return false; - } - - /* Check watermark is not bigger than the qSizeInEntries */ - ixQMgrQSizeInEntriesGet(qId, &qSizeInEntries); - - if ((unsigned)level > qSizeInEntries) - { - return false; - } - - return true; -} - -PRIVATE BOOL -qSizeInWordsIsOk (IxQMgrQSizeInWords qSize) -{ - BOOL status; - - switch (qSize) - { - case IX_QMGR_Q_SIZE16: - case IX_QMGR_Q_SIZE32: - case IX_QMGR_Q_SIZE64: - case IX_QMGR_Q_SIZE128: - status = true; - break; - default: - status = false; - break; - } - - return status; -} - -PRIVATE BOOL -qEntrySizeInWordsIsOk (IxQMgrQEntrySizeInWords entrySize) -{ - BOOL status; - - switch (entrySize) - { - case IX_QMGR_Q_ENTRY_SIZE1: - case IX_QMGR_Q_ENTRY_SIZE2: - case IX_QMGR_Q_ENTRY_SIZE4: - status = true; - break; - default: - status = false; - break; - } - - return status; -} diff --git a/drivers/net/npe/Makefile b/drivers/net/npe/Makefile deleted file mode 100644 index 0779255216..0000000000 --- a/drivers/net/npe/Makefile +++ /dev/null @@ -1,60 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -LOCAL_CFLAGS += -I$(TOPDIR)/drivers/net/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB -D__linux -CFLAGS += $(LOCAL_CFLAGS) -CPPFLAGS += $(LOCAL_CFLAGS) # needed for depend - -obj-y := npe.o \ - miiphy.o \ - IxOsalBufferMgt.o \ - IxOsalIoMem.o \ - IxOsalOsCacheMMU.o \ - IxOsalOsMsgQ.o \ - IxOsalOsSemaphore.o \ - IxOsalOsServices.o \ - IxOsalOsThread.o \ - IxEthAcc.o \ - IxEthAccCommon.o \ - IxEthAccControlInterface.o \ - IxEthAccDataPlane.o \ - IxEthAccMac.o \ - IxEthAccMii.o \ - IxEthDBAPI.o \ - IxEthDBAPISupport.o \ - IxEthDBCore.o \ - IxEthDBEvents.o \ - IxEthDBFeatures.o \ - IxEthDBFirewall.o \ - IxEthDBHashtable.o \ - IxEthDBLearning.o \ - IxEthDBMem.o \ - IxEthDBNPEAdaptor.o \ - IxEthDBPortUpdate.o \ - IxEthDBReports.o \ - IxEthDBSearch.o \ - IxEthDBSpanningTree.o \ - IxEthDBUtil.o \ - IxEthDBVlan.o \ - IxEthDBWiFi.o \ - IxEthMii.o \ - IxQMgrAqmIf.o \ - IxQMgrDispatcher.o \ - IxQMgrInit.o \ - IxQMgrQAccess.o \ - IxQMgrQCfg.o \ - IxFeatureCtrl.o \ - IxNpeDl.o \ - IxNpeDlImageMgr.o \ - IxNpeDlNpeMgr.o \ - IxNpeDlNpeMgrUtils.o \ - IxNpeMh.o \ - IxNpeMhConfig.o \ - IxNpeMhReceive.o \ - IxNpeMhSend.o \ - IxNpeMhSolicitedCbMgr.o \ - IxNpeMhUnsolicitedCbMgr.o diff --git a/drivers/net/npe/include/IxAssert.h b/drivers/net/npe/include/IxAssert.h deleted file mode 100644 index 8be0cafc44..0000000000 --- a/drivers/net/npe/include/IxAssert.h +++ /dev/null @@ -1,47 +0,0 @@ -/** - * @file IxAssert.h - * - * @date 21-MAR-2002 (replaced by OSAL) - * - * @brief This file contains assert and ensure macros used by the IXP400 software - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/** - * @defgroup IxAssert IXP400 Assertion Macros (IxAssert) API - * - * @brief Assertion support - * - * @{ - */ - -#ifndef IXASSERT_H - -#ifndef __doxygen_HIDE -#define IXASSERT_H -#endif /* __doxygen_HIDE */ - -#include "IxOsalBackward.h" - -#endif /* IXASSERT_H */ - -/** - * @} addtogroup IxAssert - */ - - - diff --git a/drivers/net/npe/include/IxAtmSch.h b/drivers/net/npe/include/IxAtmSch.h deleted file mode 100644 index 7d74771c28..0000000000 --- a/drivers/net/npe/include/IxAtmSch.h +++ /dev/null @@ -1,480 +0,0 @@ -/** - * @file IxAtmSch.h - * - * @date 23-NOV-2001 - * - * @brief Header file for the IXP400 ATM Traffic Shaper - * - * This component demonstrates an ATM Traffic Shaper implementation. It - * will perform shaping on upto 12 ports and total of 44 VCs accross all ports, - * 32 are intended for AAL0/5 and 12 for OAM (1 per port). - * The supported traffic types are;1 rt-VBR VC where PCR = SCR. - * (Effectively CBR) and Up-to 44 VBR VCs. - * - * This component models the ATM ports and VCs and is capable of producing - * a schedule of ATM cells per port which can be supplied to IxAtmdAcc - * for execution on the data path. - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - * - * @sa IxAtmm.h - * - */ - -/** - * @defgroup IxAtmSch IXP400 ATM Transmit Scheduler (IxAtmSch) API - * - * @brief IXP400 ATM scheduler component Public API - * - * @{ - */ - -#ifndef IXATMSCH_H -#define IXATMSCH_H - -#include "IxOsalTypes.h" -#include "IxAtmTypes.h" - -/* - * #defines and macros used in this file. - */ - -/* Return codes */ - -/** - * @ingroup IxAtmSch - * - * @def IX_ATMSCH_RET_NOT_ADMITTED - * @brief Indicates that CAC function has rejected VC registration due - * to insufficient line capacity. -*/ -#define IX_ATMSCH_RET_NOT_ADMITTED 2 - -/** - * @ingroup IxAtmSch - * - * @def IX_ATMSCH_RET_QUEUE_FULL - * @brief Indicates that the VC queue is full, no more demand can be - * queued at this time. - */ -#define IX_ATMSCH_RET_QUEUE_FULL 3 - -/** - * @ingroup IxAtmSch - * - * @def IX_ATMSCH_RET_QUEUE_EMPTY - * @brief Indicates that all VC queues on this port are empty and - * therefore there are no cells to be scheduled at this time. - */ -#define IX_ATMSCH_RET_QUEUE_EMPTY 4 - -/* - * Function declarations - */ - -/** - * @ingroup IxAtmSch - * - * @fn ixAtmSchInit(void) - * - * @brief This function is used to initialize the ixAtmSch component. It - * should be called before any other IxAtmSch API function. - * - * @param None - * - * @return - * - IX_SUCCESS : indicates that - * -# The ATM scheduler component has been successfully initialized. - * -# The scheduler is ready to accept Port modelling requests. - * - IX_FAIL : Some internal error has prevented the scheduler component - * from initialising. - */ -PUBLIC IX_STATUS -ixAtmSchInit(void); - -/** - * @ingroup IxAtmSch - * - * @fn ixAtmSchPortModelInitialize( IxAtmLogicalPort port, - unsigned int portRate, - unsigned int minCellsToSchedule) - * - * @brief This function shall be called first to initialize an ATM port before - * any other ixAtmSch API calls may be made for that port. - * - * @param port @ref IxAtmLogicalPort [in] - The specific port to initialize. Valid - * values range from 0 to IX_UTOPIA_MAX_PORTS - 1, representing a - * maximum of IX_UTOPIA_MAX_PORTS possible ports. - * - * @param portRate unsigned int [in] - Value indicating the upstream capacity - * of the indicated port. The value should be supplied in - * units of ATM (53 bytes) cells per second. - * A port rate of 800Kbits/s is the equivalent - * of 1886 cells per second - * - * @param minCellsToSchedule unsigned int [in] - This parameter specifies the minimum - * number of cells which the scheduler will put in a schedule - * table for this port. This value sets the worst case CDVT for VCs - * on this port i.e. CDVT = 1*minCellsToSchedule/portRate. - * @return - * - IX_SUCCESS : indicates that - * -# The ATM scheduler has been successfully initialized. - * -# The requested port model has been established. - * -# The scheduler is ready to accept VC modelling requests - * on the ATM port. - * - IX_FAIL : indicates the requested port could not be - * initialized. */ -PUBLIC IX_STATUS -ixAtmSchPortModelInitialize( IxAtmLogicalPort port, - unsigned int portRate, - unsigned int minCellsToSchedule); - -/** - * @ingroup IxAtmSch - * - * @fn ixAtmSchPortRateModify( IxAtmLogicalPort port, - unsigned int portRate) - * - * @brief This function is called to modify the portRate on a - * previously initialized port, typically in the event that - * the line condition of the port changes. - * - * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port which is to be - * modified. - * - * @param portRate unsigned int [in] - Value indicating the new upstream - * capacity for this port in cells/second. - * A port rate of 800Kbits/s is the equivalent - * of 1886 cells per second - * - * @return - * - IX_SUCCESS : The port rate has been successfully modified.
- * - IX_FAIL : The port rate could not be modified, either - * because the input data was invalid, or the new port rate is - * insufficient to support established ATM VC contracts on this - * port. - * - * @warning The IxAtmSch component will validate the supplied port - * rate is sufficient to support all established VC - * contracts on the port. If the new port rate is - * insufficient to support all established contracts then - * the request to modify the port rate will be rejected. - * In this event, the user is expected to remove - * established contracts using the ixAtmSchVcModelRemove - * interface and then retry this interface. - * - * @sa ixAtmSchVcModelRemove() */ -PUBLIC IX_STATUS -ixAtmSchPortRateModify( IxAtmLogicalPort port, - unsigned int portRate); - - -/** - * @ingroup IxAtmSch - * - * @fn ixAtmSchVcModelSetup( IxAtmLogicalPort port, - IxAtmTrafficDescriptor *trafficDesc, - IxAtmSchedulerVcId *vcId) - * - * @brief A client calls this interface to set up an upstream - * (transmitting) virtual connection model (VC) on the - * specified ATM port. This function also provides the - * virtual * connection admission control (CAC) service to the - * client. - * - * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the upstream - * VC is to be established. - * - * @param *trafficDesc @ref IxAtmTrafficDescriptor [in] - Pointer to a structure - * describing the requested traffic contract of the VC to be - * established. This structure contains the typical ATM - * traffic descriptor values (e.g. PCR, SCR, MBS, CDVT, etc.) - * defined by the ATM standard. - * - * @param *vcId @ref IxAtmSchedulerVcId [out] - This value will be filled with the - * port-unique identifier for this virtual connection. A - * valid identification is a non-negative number. - * - * @return - * - IX_SUCCESS : The VC has been successfully established on - * this port. The client may begin to submit demand on this VC. - * - IX_ATMSCH_RET_NOT_ADMITTED : The VC cannot be established - * on this port because there is insufficient upstream capacity - * available to support the requested traffic contract descriptor - * - IX_FAIL :Input data are invalid. VC has not been - * established. - */ -PUBLIC IX_STATUS -ixAtmSchVcModelSetup( IxAtmLogicalPort port, - IxAtmTrafficDescriptor *trafficDesc, - IxAtmSchedulerVcId *vcId); - -/** - * @ingroup IxAtmSch - * - * @fn ixAtmSchVcConnIdSet( IxAtmLogicalPort port, - IxAtmSchedulerVcId vcId, - IxAtmConnId vcUserConnId) - * - * @brief A client calls this interface to set the vcUserConnId for a VC on - * the specified ATM port. This vcUserConnId will default to - * IX_ATM_IDLE_CELLS_CONNID if this function is not called for a VC. - * Hence if the client does not call this function for a VC then only idle - * cells will be scheduled for this VC. - * - * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the upstream - * VC is has been established. - * - * @param vcId @ref IxAtmSchedulerVcId [in] - This is the unique identifier for this virtual - * connection. A valid identification is a non-negative number and is - * all ports. - * - * @param vcUserConnId @ref IxAtmConnId [in] - The connId is used to refer to a VC in schedule - * table entries. It is treated as the Id by which the scheduler client - * knows the VC. It is used in any communicatations from the Scheduler - * to the scheduler user e.g. schedule table entries. - * - * @return - * - IX_SUCCESS : The id has successfully been set. - * - IX_FAIL :Input data are invalid. connId id is not established. - */ -PUBLIC IX_STATUS -ixAtmSchVcConnIdSet( IxAtmLogicalPort port, - IxAtmSchedulerVcId vcId, - IxAtmConnId vcUserConnId); - -/** - * @ingroup IxAtmSch - * - * @fn ixAtmSchVcModelRemove( IxAtmLogicalPort port, - IxAtmSchedulerVcId vcId) - * - * @brief Interface called by the client to remove a previously - * established VC on a particular port. - * - * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be - * removed is established. - * - * @param vcId @ref IxAtmSchedulerVcId [in] - Identifies the VC to be removed. This is the - * value returned by the @ref ixAtmSchVcModelSetup call which - * established the relevant VC. - * - * @return - * - IX_SUCCESS : The VC has been successfully removed from - * this port. It is no longer modelled on this port. - * - IX_FAIL :Input data are invalid. The VC is still being modeled - * by the traffic shaper. - * - * @sa ixAtmSchVcModelSetup() - */ -PUBLIC IX_STATUS -ixAtmSchVcModelRemove( IxAtmLogicalPort port, - IxAtmSchedulerVcId vcId); - -/** - * @ingroup IxAtmSch - * - * @fn ixAtmSchVcQueueUpdate( IxAtmLogicalPort port, - IxAtmSchedulerVcId vcId, - unsigned int numberOfCells) - * - * @brief The client calls this function to notify IxAtmSch that the - * user of a VC has submitted cells for transmission. - * - * This information is stored, aggregated from a number of calls to - * ixAtmSchVcQueueUpdate and eventually used in the call to - * ixAtmSchTableUpdate. - * - * Normally IxAtmSch will update the VC queue by adding the number of - * cells to the current queue length. However, if IxAtmSch - * determines that the user has over-submitted for the VC and - * exceeded its transmission quota the queue request can be rejected. - * The user should resubmit the request later when the queue has been - * depleted. - * - * This implementation of ixAtmSchVcQueueUpdate uses no operating - * system or external facilities, either directly or indirectly. - * This allows clients to call this function form within an interrupt handler. - * - * This interface is structurally compatible with the - * IxAtmdAccSchQueueUpdate callback type definition required for - * IXP400 ATM scheduler interoperability. - * - * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be - * updated is established. - * - * @param vcId @ref IxAtmSchedulerVcId [in] - Identifies the VC to be updated. This is the - * value returned by the @ref ixAtmSchVcModelSetup call which - * established the relevant VC. - * - * @param numberOfCells unsigned int [in] - Indicates how many ATM cells should - * be added to the queue for this VC. - * - * @return - * - IX_SUCCESS : The VC queue has been successfully updated. - * - IX_ATMSCH_RET_QUEUE_FULL : The VC queue has reached a - * preset limit. This indicates the client has over-submitted - * and exceeded its transmission quota. The request is - * rejected. The VC queue is not updated. The VC user is - * advised to resubmit the request later. - * - IX_FAIL : The input are invalid. No VC queue is updated. - * - * @warning IxAtmSch assumes that the calling software ensures that - * calls to ixAtmSchVcQueueUpdate, ixAtmSchVcQueueClear and - * ixAtmSchTableUpdate are both self and mutually exclusive - * for the same port. - * - * @sa ixAtmSchVcQueueUpdate(), ixAtmSchVcQueueClear(), ixAtmSchTableUpdate(). */ -PUBLIC IX_STATUS -ixAtmSchVcQueueUpdate( IxAtmLogicalPort port, - IxAtmSchedulerVcId vcId, - unsigned int numberOfCells); - -/** - * @ingroup IxAtmSch - * - * @fn ixAtmSchVcQueueClear( IxAtmLogicalPort port, - IxAtmSchedulerVcId vcId) - * - * @brief The client calls this function to remove all currently - * queued cells from a registered VC. The pending cell count - * for the specified VC is reset to zero. - * - * This interface is structurally compatible with the - * IxAtmdAccSchQueueClear callback type definition required for - * IXP400 ATM scheduler interoperability. - * - * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be - * cleared is established. - * - * @param vcId @ref IxAtmSchedulerVcId [in] - Identifies the VC to be cleared. This is the - * value returned by the @ref ixAtmSchVcModelSetup call which - * established the relevant VC. - * - * @return - * - IX_SUCCESS : The VC queue has been successfully cleared. - * - IX_FAIL : The input are invalid. No VC queue is modified. - * - * @warning IxAtmSch assumes that the calling software ensures that - * calls to ixAtmSchVcQueueUpdate, ixAtmSchVcQueueClear and - * ixAtmSchTableUpdate are both self and mutually exclusive - * for the same port. - * - * @sa ixAtmSchVcQueueUpdate(), ixAtmSchVcQueueClear(), ixAtmSchTableUpdate(). */ -PUBLIC IX_STATUS -ixAtmSchVcQueueClear( IxAtmLogicalPort port, - IxAtmSchedulerVcId vcId); - -/** - * @ingroup IxAtmSch - * - * @fn ixAtmSchTableUpdate( IxAtmLogicalPort port, - unsigned int maxCells, - IxAtmScheduleTable **rettable) - * - * @brief The client calls this function to request an update of the - * schedule table for a particular ATM port. - * - * This is called when the client decides it needs a new sequence of - * cells to send (probably because the transmit queue is near to - * empty for this ATM port). The scheduler will use its stored - * information on the cells submitted for transmit (i.e. data - * supplied via @ref ixAtmSchVcQueueUpdate function) with the traffic - * descriptor information of all established VCs on the ATM port to - * decide the sequence of cells to be sent and fill the schedule - * table for a period of time into the future. - * - * IxAtmSch will guarantee a minimum of minCellsToSchedule if there - * is at least one cell ready to send. If there are no cells then - * IX_ATMSCH_RET_QUEUE_EMPTY is returned. - * - * This implementation of ixAtmSchTableUpdate uses no operating - * system or external facilities, either directly or indirectly. - * This allows clients to call this function form within an FIQ - * interrupt handler. - * - * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port for which requested - * schedule table is to be generated. - * - * @param maxCells unsigned [in] - Specifies the maximum number of cells - * that must be scheduled in the supplied table during any - * call to the interface. - * - * @param **table @ref IxAtmScheduleTable [out] - A pointer to an area of - * storage is returned which contains the generated - * schedule table. The client should not modify the - * contents of this table. - * - * @return - * - IX_SUCCESS : The schedule table has been published. - * Currently there is at least one VC queue that is nonempty. - * - IX_ATMSCH_RET_QUEUE_EMPTY : Currently all VC queues on - * this port are empty. The schedule table returned is set to - * NULL. The client is not expected to invoke this function - * again until more cells have been submitted on this port - * through the @ref ixAtmSchVcQueueUpdate function. - * - IX_FAIL : The input are invalid. No action is taken. - * - * @warning IxAtmSch assumes that the calling software ensures that - * calls to ixAtmSchVcQueueUpdate, ixAtmSchVcQueueClear and - * ixAtmSchTableUpdate are both self and mutually exclusive - * for the same port. - * - * @warning Subsequent calls to this function for the same port will - * overwrite the contents of previously supplied schedule - * tables. The client must be completely finished with the - * previously supplied schedule table before calling this - * function again for the same port. - * - * @sa ixAtmSchVcQueueUpdate(), ixAtmSchVcQueueClear(), ixAtmSchTableUpdate(). */ -PUBLIC IX_STATUS -ixAtmSchTableUpdate( IxAtmLogicalPort port, - unsigned int maxCells, - IxAtmScheduleTable **rettable); - -/** - * @ingroup IxAtmSch - * - * @fn ixAtmSchShow(void) - * - * @brief Utility function which will print statistics on the current - * and accumulated state of VCs and traffic in the ATM - * scheduler component. Output is sent to the default output - * device. - * - * @param none - * @return none - */ -PUBLIC void -ixAtmSchShow(void); - -/** - * @ingroup IxAtmSch - * - * @fn ixAtmSchStatsClear(void) - * - * @brief Utility function which will reset all counter statistics in - * the ATM scheduler to zero. - * - * @param none - * @return none - */ -PUBLIC void -ixAtmSchStatsClear(void); - -#endif -/* IXATMSCH_H */ - -/** @} */ diff --git a/drivers/net/npe/include/IxAtmTypes.h b/drivers/net/npe/include/IxAtmTypes.h deleted file mode 100644 index 6c8d12f394..0000000000 --- a/drivers/net/npe/include/IxAtmTypes.h +++ /dev/null @@ -1,385 +0,0 @@ -/** - * @file IxAtmTypes.h - * - * @date 24-MAR-2002 - * - * @brief This file contains Atm types common to a number of Atm components. - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/* ------------------------------------------------------ - Doxygen group definitions - ------------------------------------------------------ */ -/** - * @defgroup IxAtmTypes IXP400 ATM Types (IxAtmTypes) - * - * @brief The common set of types used in many Atm components - * - * @{ */ - -#ifndef IXATMTYPES_H -#define IXATMTYPES_H - -#include "IxNpeA.h" - -/** - * @enum IxAtmLogicalPort - * - * @brief Logical Port Definitions : - * - * Only 1 port is available in SPHY configuration - * 12 ports are enabled in MPHY configuration - * - */ -typedef enum -{ - IX_UTOPIA_PORT_0 = 0, /**< Port 0 */ -#ifdef IX_NPE_MPHYMULTIPORT - IX_UTOPIA_PORT_1, /**< Port 1 */ - IX_UTOPIA_PORT_2, /**< Port 2 */ - IX_UTOPIA_PORT_3, /**< Port 3 */ - IX_UTOPIA_PORT_4, /**< Port 4 */ - IX_UTOPIA_PORT_5, /**< Port 5 */ - IX_UTOPIA_PORT_6, /**< Port 6 */ - IX_UTOPIA_PORT_7, /**< Port 7 */ - IX_UTOPIA_PORT_8, /**< Port 8 */ - IX_UTOPIA_PORT_9, /**< Port 9 */ - IX_UTOPIA_PORT_10, /**< Port 10 */ - IX_UTOPIA_PORT_11, /**< Port 11 */ -#endif /* IX_NPE_MPHY */ - IX_UTOPIA_MAX_PORTS /**< Not a port - just a definition for the - * maximum possible ports - */ -} IxAtmLogicalPort; - -/** - * @def IX_ATM_CELL_PAYLOAD_SIZE - * @brief Size of a ATM cell payload - */ -#define IX_ATM_CELL_PAYLOAD_SIZE (48) - -/** - * @def IX_ATM_CELL_SIZE - * @brief Size of a ATM cell, including header - */ -#define IX_ATM_CELL_SIZE (53) - -/** - * @def IX_ATM_CELL_SIZE_NO_HEC - * @brief Size of a ATM cell, excluding HEC byte - */ -#define IX_ATM_CELL_SIZE_NO_HEC (IX_ATM_CELL_SIZE - 1) - -/** - * @def IX_ATM_OAM_CELL_SIZE_NO_HEC - * @brief Size of a OAM cell, excluding HEC byte - */ -#define IX_ATM_OAM_CELL_SIZE_NO_HEC IX_ATM_CELL_SIZE_NO_HEC - -/** - * @def IX_ATM_AAL0_48_CELL_PAYLOAD_SIZE - * @brief Size of a AAL0 48 Cell payload - */ -#define IX_ATM_AAL0_48_CELL_PAYLOAD_SIZE IX_ATM_CELL_PAYLOAD_SIZE - -/** - * @def IX_ATM_AAL5_CELL_PAYLOAD_SIZE - * @brief Size of a AAL5 Cell payload - */ -#define IX_ATM_AAL5_CELL_PAYLOAD_SIZE IX_ATM_CELL_PAYLOAD_SIZE - -/** - * @def IX_ATM_AAL0_52_CELL_SIZE_NO_HEC - * @brief Size of a AAL0 52 Cell, excluding HEC byte - */ -#define IX_ATM_AAL0_52_CELL_SIZE_NO_HEC IX_ATM_CELL_SIZE_NO_HEC - - -/** - * @def IX_ATM_MAX_VPI - * @brief Maximum value of an ATM VPI - */ -#define IX_ATM_MAX_VPI 255 - -/** - * @def IX_ATM_MAX_VCI - * @brief Maximum value of an ATM VCI - */ -#define IX_ATM_MAX_VCI 65535 - - /** - * @def IX_ATM_MAX_NUM_AAL_VCS - * @brief Maximum number of active AAL5/AAL0 VCs in the system - */ -#define IX_ATM_MAX_NUM_AAL_VCS 32 - -/** - * @def IX_ATM_MAX_NUM_VC - * @brief Maximum number of active AAL5/AAL0 VCs in the system - * The use of this macro is depreciated, it is retained for - * backward compatiblity. For current software release - * and beyond the define IX_ATM_MAX_NUM_AAL_VC should be used. - */ -#define IX_ATM_MAX_NUM_VC IX_ATM_MAX_NUM_AAL_VCS - - - -/** - * @def IX_ATM_MAX_NUM_OAM_TX_VCS - * @brief Maximum number of active OAM Tx VCs in the system, - * 1 OAM VC per port - */ -#define IX_ATM_MAX_NUM_OAM_TX_VCS IX_UTOPIA_MAX_PORTS - -/** - * @def IX_ATM_MAX_NUM_OAM_RX_VCS - * @brief Maximum number of active OAM Rx VCs in the system, - * 1 OAM VC shared accross all ports - */ -#define IX_ATM_MAX_NUM_OAM_RX_VCS 1 - -/** - * @def IX_ATM_MAX_NUM_AAL_OAM_TX_VCS - * @brief Maximum number of active AAL5/AAL0/OAM Tx VCs in the system - */ -#define IX_ATM_MAX_NUM_AAL_OAM_TX_VCS (IX_ATM_MAX_NUM_AAL_VCS + IX_ATM_MAX_NUM_OAM_TX_VCS) - -/** - * @def IX_ATM_MAX_NUM_AAL_OAM_RX_VCS - * @brief Maximum number of active AAL5/AAL0/OAM Rx VCs in the system - */ -#define IX_ATM_MAX_NUM_AAL_OAM_RX_VCS (IX_ATM_MAX_NUM_AAL_VCS + IX_ATM_MAX_NUM_OAM_RX_VCS) - -/** - * @def IX_ATM_IDLE_CELLS_CONNID - * @brief VC Id used to indicate idle cells in the returned schedule table. - */ -#define IX_ATM_IDLE_CELLS_CONNID 0 - - -/** - * @def IX_ATM_CELL_HEADER_VCI_GET - * @brief get the VCI field from a cell header - */ -#define IX_ATM_CELL_HEADER_VCI_GET(cellHeader) \ - (((cellHeader) >> 4) & IX_OAM_VCI_BITS_MASK); - -/** - * @def IX_ATM_CELL_HEADER_VPI_GET - * @brief get the VPI field from a cell header - */ -#define IX_ATM_CELL_HEADER_VPI_GET(cellHeader) \ - (((cellHeader) >> 20) & IX_OAM_VPI_BITS_MASK); - -/** - * @def IX_ATM_CELL_HEADER_PTI_GET - * @brief get the PTI field from a cell header - */ -#define IX_ATM_CELL_HEADER_PTI_GET(cellHeader) \ - ((cellHeader) >> 1) & IX_OAM_PTI_BITS_MASK; - -/** - * @typedef IxAtmCellHeader - * - * @brief ATM Cell Header, does not contain 4 byte HEC, added by NPE-A - */ -typedef unsigned int IxAtmCellHeader; - - -/** - * @enum IxAtmServiceCategory - * - * @brief Enumerated type representing available ATM service categories. - * For more informatoin on these categories, see "Traffic Management - * Specification" v4.1, published by the ATM Forum - - * http://www.atmforum.com - */ -typedef enum -{ - IX_ATM_CBR, /**< Constant Bit Rate */ - IX_ATM_RTVBR, /**< Real Time Variable Bit Rate */ - IX_ATM_VBR, /**< Variable Bit Rate */ - IX_ATM_UBR, /**< Unspecified Bit Rate */ - IX_ATM_ABR /**< Available Bit Rate (not supported) */ - -} IxAtmServiceCategory; - -/** - * - * @enum IxAtmRxQueueId - * - * @brief Rx Queue Type for RX traffic - * - * IxAtmRxQueueId defines the queues involved for receiving data. - * - * There are two queues to facilitate prioritisation handling - * and processing the 2 queues with different algorithms and - * constraints - * - * e.g. : one queue can carry voice (or time-critical traffic), the - * other queue can carry non-voice traffic - * - */ -typedef enum -{ - IX_ATM_RX_A = 0, /**< RX queue A */ - IX_ATM_RX_B, /**< RX queue B */ - IX_ATM_MAX_RX_STREAMS /**< Maximum number of RX streams */ -} IxAtmRxQueueId; - -/** - * @brief Structure describing an ATM traffic contract for a Virtual - * Connection (VC). - * - * Structure is used to specify the requested traffic contract for a - * VC to the IxAtmSch component using the @ref ixAtmSchVcModelSetup - * interface. - * - * These parameters are defined by the ATM forum working group - * (http://www.atmforum.com). - * - * @note Typical values for a voice channel 64 Kbit/s - * - atmService @a IX_ATM_RTVBR - * - pcr 400 (include IP overhead, and AAL5 trailer) - * - cdvt 5000000 (5 ms) - * - scr = pcr - * - * @note Typical values for a data channel 800 Kbit/s - * - atmService @a IX_ATM_UBR - * - pcr 1962 (include IP overhead, and AAL5 trailer) - * - cdvt 5000000 (5 ms) - * - */ -typedef struct -{ - IxAtmServiceCategory atmService; /**< ATM service category */ - unsigned pcr; /**< Peak Cell Rate - cells per second */ - unsigned cdvt; /**< Cell Delay Variation Tolerance - in nanoseconds */ - unsigned scr; /**< Sustained Cell Rate - cells per second */ - unsigned mbs; /**< Max Burst Size - cells */ - unsigned mcr; /**< Minimum Cell Rate - cells per second */ - unsigned mfs; /**< Max Frame Size - cells */ -} IxAtmTrafficDescriptor; - -/** - * @typedef IxAtmConnId - * - * @brief ATM VC data connection identifier. - * - * This is is generated by IxAtmdAcc when a successful connection is - * made on a VC. The is the ID by which IxAtmdAcc knows an active - * VC and should be used in IxAtmdAcc API calls to reference a - * specific VC. - */ -typedef unsigned int IxAtmConnId; - -/** - * @typedef IxAtmSchedulerVcId - * - * @brief ATM VC scheduling connection identifier. - * - * This id is generated and used by ATM Tx controller, generally - * the traffic shaper (e.g. IxAtmSch). The IxAtmdAcc component - * will request one of these Ids whenever a data connection on - * a Tx VC is requested. This ID will be used in callbacks to - * the ATM Transmission Ctrl s/w (e.g. IxAtmm) to reference a - * particular VC. - */ -typedef int IxAtmSchedulerVcId; - -/** - * @typedef IxAtmNpeRxVcId - * - * @brief ATM Rx VC identifier used by the ATM Npe. - * - * This Id is generated by IxAtmdAcc when a successful data connection - * is made on a rx VC. - */ -typedef unsigned int IxAtmNpeRxVcId; - -/** - * @brief ATM Schedule Table entry - * - * This IxAtmScheduleTableEntry is used by an ATM scheduler to inform - * IxAtmdAcc about the data to transmit (in term of cells per VC) - * - * This structure defines - * @li the number of cells to be transmitted (numberOfCells) - * @li the VC connection to be used for transmission (connId). - * - * @note - When the connection Id value is IX_ATM_IDLE_CELLS_CONNID, the - * corresponding number of idle cells will be transmitted to the hardware. - * - */ -typedef struct -{ - IxAtmConnId connId; /**< connection Id - * - * Identifier of VC from which cells are to be transmitted. - * When this valus is IX_ATM_IDLE_CELLS_CONNID, this indicates - * that the system should transmit the specified number - * of idle cells. Unknown connIds result in the transmission - * idle cells. - */ - unsigned int numberOfCells; /**< number of cells to transmit - * - * The number of contiguous cells to schedule from this VC - * at this point. The valid range is from 1 to - * @a IX_ATM_SCHEDULETABLE_MAXCELLS_PER_ENTRY. This - * number can swap over mbufs and pdus. OverSchduling results - * in the transmission of idle cells. - */ -} IxAtmScheduleTableEntry; - -/** - * @brief This structure defines a schedule table which gives details - * on which data (from which VCs) should be transmitted for a - * forthcoming period of time for a particular port and the - * order in which that data should be transmitted. - * - * The schedule table consists of a series of entries each of which - * will schedule one or more cells from a particular registered VC. - * The total number of cells scheduled and the total number of - * entries in the table are also indicated. - * - */ -typedef struct -{ - unsigned tableSize; /**< Number of entries - * - * Indicates the total number of - * entries in the table. - */ - unsigned totalCellSlots; /**< Number of cells - * - * Indicates the total number of ATM - * cells which are scheduled by all the - * entries in the table. - */ - IxAtmScheduleTableEntry *table; /**< Pointer to schedule entries - * - * Pointer to an array - * containing tableSize entries - */ -} IxAtmScheduleTable; - -#endif /* IXATMTYPES_H */ - -/** - * @} defgroup IxAtmTypes - */ - - diff --git a/drivers/net/npe/include/IxAtmdAcc.h b/drivers/net/npe/include/IxAtmdAcc.h deleted file mode 100644 index b37c615029..0000000000 --- a/drivers/net/npe/include/IxAtmdAcc.h +++ /dev/null @@ -1,1169 +0,0 @@ -/** - * @file IxAtmdAcc.h - * - * @date 07-Nov-2001 - * - * @brief IxAtmdAcc Public API - * - * This file contains the public API of IxAtmdAcc, related to the - * data functions of the component - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/* ------------------------------------------------------ - Doxygen group definitions - ------------------------------------------------------ */ - -/** - * - * @defgroup IxAtmdAccAPI IXP400 ATM Driver Access (IxAtmdAcc) API - * - * @brief The public API for the IXP400 Atm Driver Data component - * - * IxAtmdAcc is the low level interface by which AAL0/AAL5 and - * OAM data gets transmitted to,and received from the Utopia bus. - * - * For AAL0/AAL5 services transmit and receive connections may - * be established independantly for unique combinations of - * port,VPI,and VCI. - * - * Two AAL0 services supporting 48 or 52 byte cell data are provided. - * Submitted AAL0 PDUs must be a multiple of the cell data size (48/52). - * AAL0_52 is a raw cell service the client must format - * the PDU with an ATM cell header (excluding HEC) at the start of - * each cell, note that AtmdAcc does not validate the cell headers in - * a submitted PDU. - * - * OAM cells cannot be received over the AAL0 service but instead - * are received over a dedicated OAM service. - * - * For the OAM service an "OAM Tx channel" may be enabled for a port - * by establishing a single dedicated OAM Tx connection on that port. - * A single "OAM Rx channel" for all ports may be enabled by - * establishing a dedicated OAM Rx connection. - * - * The OAM service allows buffers containing 52 byte OAM F4/F5 cells - * to be transmitted and received over the dedicated OAM channels. - * HEC is appended/removed, and CRC-10 performed by the NPE. The OAM - * service offered by AtmdAcc is a raw cell transport service. - * It is assumed that ITU I.610 procedures that make use of this - * service are implemented above AtmdAcc. - * - * Note that the dedicated OAM connections are established on - * reserved VPI,VCI, and (in the case of Rx) port values defined below. - * These values are used purely to descriminate the dedicated OAM channels - * and do not identify a particular OAM F4/F5 flow. F4/F5 flows may be - * realised for particluar VPI/VCIs by manipulating the VPI,VCI - * fields of the ATM cell headers of cells in the buffers passed - * to AtmdAcc. Note that AtmdAcc does not validate the cell headers - * in a submitted OAM PDU. - * - * - * - * This part is related to the User datapath processing - * - * @{ - */ - -#ifndef IXATMDACC_H -#define IXATMDACC_H - -#include "IxAtmTypes.h" - -/* ------------------------------------------------------ - AtmdAcc Data Types definition - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccAPI - * - * @def IX_ATMDACC_WARNING - * - * @brief Warning return code - * - * This constant is used to tell IxAtmDAcc user about a special case. - * - */ -#define IX_ATMDACC_WARNING 2 - -/** - * - * @ingroup IxAtmdAccAPI - * - * @def IX_ATMDACC_BUSY - * - * @brief Busy return code - * - * This constant is used to tell IxAtmDAcc user that the request - * is correct, but cannot be processed because the IxAtmAcc resources - * are already used. The user has to retry its request later - * - */ -#define IX_ATMDACC_BUSY 3 - -/** - * - * @ingroup IxAtmdAccAPI - * - * @def IX_ATMDACC_RESOURCES_STILL_ALLOCATED - * - * @brief Disconnect return code - * - * This constant is used to tell IxAtmDAcc user that the disconnect - * functions are not complete because the resources used by the driver - * are not yet released. The user has to retry the disconnect call - * later. - * - */ -#define IX_ATMDACC_RESOURCES_STILL_ALLOCATED 4 - -/** - * - * @ingroup IxAtmdAccAPI - * - * @def IX_ATMDACC_DEFAULT_REPLENISH_COUNT - * - * @brief Default resources usage for RxVcFree replenish mechanism - * - * This constant is used to tell IxAtmDAcc to allocate and use - * the minimum of resources for rx free replenish. - * - * @sa ixAtmdAccRxVcConnect - */ -#define IX_ATMDACC_DEFAULT_REPLENISH_COUNT 0 - - -/** - * @ingroup IxAtmdAccAPI - * - * @def IX_ATMDACC_OAM_TX_VPI - * - * @brief The reserved value used for the dedicated OAM - * Tx connection. This "well known" value is used by atmdAcc and - * its clients to dsicriminate the OAM channel, and should be chosen so - * that it does not coencide with the VPI value used in an AAL0/AAL5 connection. - * Any attempt to connect a service type other than OAM on this VPI will fail. - * - * - */ -#define IX_ATMDACC_OAM_TX_VPI 0 - -/** - * @ingroup IxAtmdAccAPI - * - * @def IX_ATMDACC_OAM_TX_VCI - * - * @brief The reserved value used for the dedicated OAM - * Tx connection. This "well known" value is used by atmdAcc and - * its clients to dsicriminate the OAM channel, and should be chosen so - * that it does not coencide with the VCI value used in an AAL0/AAL5 connection. - * Any attempt to connect a service type other than OAM on this VCI will fail. - */ -#define IX_ATMDACC_OAM_TX_VCI 0 - - - /** - * @ingroup IxAtmdAccAPI - * - * @def IX_ATMDACC_OAM_RX_PORT - * - * @brief The reserved dummy PORT used for all dedicated OAM - * Rx connections. Note that this is not a real port but must - * have a value that lies within the valid range of port values. - */ -#define IX_ATMDACC_OAM_RX_PORT IX_UTOPIA_PORT_0 - - /** - * @ingroup IxAtmdAccAPI - * - * @def IX_ATMDACC_OAM_RX_VPI - * - * @brief The reserved value value used for the dedicated OAM - * Rx connection. This value should be chosen so that it does not - * coencide with the VPI value used in an AAL0/AAL5 connection. - * Any attempt to connect a service type other than OAM on this VPI will fail. - */ -#define IX_ATMDACC_OAM_RX_VPI 0 - -/** - * @ingroup IxAtmdAccAPI - * - * @def IX_ATMDACC_OAM_RX_VCI - * - * @brief The reserved value value used for the dedicated OAM - * Rx connection. This value should be chosen so that it does not - * coencide with the VCI value used in an AAL0/AAL5 connection. - * Any attempt to connect a service type other than OAM on this VCI will fail. - */ -#define IX_ATMDACC_OAM_RX_VCI 0 - - -/** - * @enum IxAtmdAccPduStatus - * - * @ingroup IxAtmdAccAPI - * - * @brief IxAtmdAcc Pdu status : - * - * IxAtmdAccPduStatus is used during a RX operation to indicate - * the status of the received PDU - * - */ - -typedef enum -{ - IX_ATMDACC_AAL0_VALID = 0, /**< aal0 pdu */ - IX_ATMDACC_OAM_VALID, /**< OAM pdu */ - IX_ATMDACC_AAL2_VALID, /**< aal2 pdu @b reserved for future use */ - IX_ATMDACC_AAL5_VALID, /**< aal5 pdu complete and trailer is valid */ - IX_ATMDACC_AAL5_PARTIAL, /**< aal5 pdu not complete, trailer is missing */ - IX_ATMDACC_AAL5_CRC_ERROR, /**< aal5 pdu not complete, crc error/length error */ - IX_ATMDACC_MBUF_RETURN /**< empty buffer returned to the user */ -} IxAtmdAccPduStatus; - - -/** - * - * @enum IxAtmdAccAalType - * - * @ingroup IxAtmdAccAPI - * - * @brief IxAtmdAcc AAL Service Type : - * - * IxAtmdAccAalType defines the type of traffic to run on this VC - * - */ -typedef enum -{ - IX_ATMDACC_AAL5, /**< ITU-T AAL5 */ - IX_ATMDACC_AAL2, /**< ITU-T AAL2 @b reserved for future use */ - IX_ATMDACC_AAL0_48, /**< AAL0 48 byte payloads (cell header is added by NPE)*/ - IX_ATMDACC_AAL0_52, /**< AAL0 52 byte cell data (HEC is added by NPE) */ - IX_ATMDACC_OAM, /**< OAM cell transport service (HEC is added by NPE)*/ - IX_ATMDACC_MAX_SERVICE_TYPE /**< not a service, used for parameter validation */ -} IxAtmdAccAalType; - -/** - * - * @enum IxAtmdAccClpStatus - * - * @ingroup IxAtmdAccAPI - * - * @brief IxAtmdAcc CLP indication - * - * IxAtmdAccClpStatus defines the CLP status of the current PDU - * - */ -typedef enum -{ - IX_ATMDACC_CLP_NOT_SET = 0, /**< CLP indication is not set */ - IX_ATMDACC_CLP_SET = 1 /**< CLP indication is set */ -} IxAtmdAccClpStatus; - -/** - * @typedef IxAtmdAccUserId - * - * @ingroup IxAtmdAccAPI - * - * @brief User-supplied Id - * - * IxAtmdAccUserId is passed through callbacks and allows the - * IxAtmdAcc user to identify the source of a call back. The range of - * this user-owned Id is [0...2^32-1)]. - * - * The user provides this own Ids on a per-channel basis as a parameter - * in a call to @a ixAtmdAccRxVcConnect() or @a ixAtmdAccRxVcConnect() - * - * @sa ixAtmdAccRxVcConnect - * @sa ixAtmdAccTxVcConnect - * - */ -typedef unsigned int IxAtmdAccUserId; - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to RX traffic - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccAPI - * - * @brief Rx callback prototype - * - * IxAtmdAccRxVcRxCallback is the prototype of the Rx callback user - * function called once per PDU to pass a receive Pdu to a user on a - * partilcular connection. The callback is likely to push the mbufs - * to a protocol layer, and recycle the mbufs for a further use. - * - * @note -This function is called ONLY in the context of - * the @a ixAtmdAccRxDispatch() function - * - * @sa ixAtmdAccRxDispatch - * @sa ixAtmdAccRxVcConnect - * - * @param port @ref IxAtmLogicalPort [in] - the port on which this PDU was received - * a logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * @param userId @ref IxAtmdAccUserId [in] - user Id provided in the call - * to @a ixAtmdAccRxVcConnect() - * @param status @ref IxAtmdAccPduStatus [in] - an indication about the PDU validity. - * In the case of AAL0 the only possibile value is - * AAL0_VALID, in this case the client may optionally determine - * that an rx timeout occured by checking if the mbuf is - * compleletly or only partially filled, the later case - * indicating a timeout. - * In the case of OAM the only possible value is OAM valid. - * The status is set to @a IX_ATMDACC_MBUF_RETURN when - * the mbuf is released during a disconnect process. - * @param clp @ref IxAtmdAccClpStatus [in] - clp indication for this PDU. - * For AAL5/AAL0_48 this information - * is set if the clp bit of any rx cell is set - * For AAL0-52/OAM the client may inspect the CLP in individual - * cell headers in the PDU, and this parameter is set to 0. - * @param *mbufPtr @ref IX_OSAL_MBUF [in] - depending on the servive type a pointer to - * an mbuf (AAL5/AAL0/OAM) or mbuf chain (AAL5 only), - * that comprises the complete PDU data. - * - * This parameter is guaranteed not to be a null pointer. - * - */ -typedef void (*IxAtmdAccRxVcRxCallback) (IxAtmLogicalPort port, - IxAtmdAccUserId userId, - IxAtmdAccPduStatus status, - IxAtmdAccClpStatus clp, - IX_OSAL_MBUF * mbufPtr); - -/** - * - * @ingroup IxAtmdAccAPI - * - * @brief Callback prototype for free buffer level is low. - * - * IxAtmdAccRxVcFreeLowCallback is the prototype of the user function - * which get called on a per-VC basis, when more mbufs are needed to - * continue the ATM data reception. This function is likely to supply - * more available mbufs by one or many calls to the replenish function - * @a ixAtmdAccRxVcFreeReplenish() - * - * This function is called when the number of available buffers for - * reception is going under the threshold level as defined - * in @a ixAtmdAccRxVcFreeLowCallbackRegister() - * - * This function is called inside an Qmgr dispatch context. No system - * resource or interrupt-unsafe feature should be used inside this - * callback. - * - * @sa ixAtmdAccRxVcFreeLowCallbackRegister - * @sa IxAtmdAccRxVcFreeLowCallback - * @sa ixAtmdAccRxVcFreeReplenish - * @sa ixAtmdAccRxVcFreeEntriesQuery - * @sa ixAtmdAccRxVcConnect - * - * @param userId @ref IxAtmdAccUserId [in] - user Id provided in the call - * to @a ixAtmdAccRxVcConnect() - * - * @return None - * - */ -typedef void (*IxAtmdAccRxVcFreeLowCallback) (IxAtmdAccUserId userId); - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to TX traffic - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccAPI - * - * @brief Buffer callback prototype. - * - * This function is called to relinguish ownership of a transmitted - * buffer chain to the user. - * - * @note -In the case of a chained mbuf the AmtdAcc component can - * chain many user buffers together and pass ownership to the user in - * one function call. - * - * @param userId @ref IxAtmdAccUserId [in] - user If provided at registration of this - * callback. - * @param mbufPtr @ref IX_OSAL_MBUF [in] - a pointer to mbufs or chain of mbufs and is - * guaranteed not to be a null pointer. - * - */ -typedef void (*IxAtmdAccTxVcBufferReturnCallback) (IxAtmdAccUserId userId, - IX_OSAL_MBUF * mbufPtr); - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to Initialisation - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccAPI - * - * @fn ixAtmdAccInit (void) - * - * @brief Initialise the IxAtmdAcc Component - * - * This function initialise the IxAtmdAcc component. This function shall - * be called before any other function of the API. Its role is to - * initialise all internal resources of the IxAtmdAcc component. - * - * The ixQmgr component needs to be initialized prior the use of - * @a ixAtmdAccInit() - * - * @param none - * - * Failing to initilialize the IxAtmdAcc API before any use of it will - * result in a failed status. - * If the specified component is not present, a success status will still be - * returned, however, a warning indicating the NPE to download to is not - * present will be issued. - * - * @return @li IX_SUCCESS initialisation is complete (in case of component not - * being present, a warning is clearly indicated) - * @return @li IX_FAIL unable to process this request either - * because this IxAtmdAcc is already initialised - * or some unspecified error has occrred. - */ -PUBLIC IX_STATUS ixAtmdAccInit (void); - -/** - * - * @ingroup IxAtmdAccAPI - * - * @fn ixAtmdAccShow (void) - * - * @brief Show IxAtmdAcc configuration on a per port basis - * - * @param none - * - * @return none - * - * @note - Display use printf() and are redirected to stdout - */ -PUBLIC void -ixAtmdAccShow (void); - -/** - * - * @ingroup IxAtmdAccAPI - * - * @fn ixAtmdAccStatsShow (void) - * - * @brief Show all IxAtmdAcc stats - * - * @param none - * - * @return none - * - * @note - Stats display use printf() and are redirected to stdout - */ -PUBLIC void -ixAtmdAccStatsShow (void); - -/** - * - * @ingroup IxAtmdAccAPI - * - * @fn ixAtmdAccStatsReset (void) - * - * @brief Reset all IxAtmdAcc stats - * - * @param none - * - * @return none - * - */ -PUBLIC void -ixAtmdAccStatsReset (void); - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to RX traffic - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccAPI - * - * @fn ixAtmdAccRxVcConnect (IxAtmLogicalPort port, - unsigned int vpi, - unsigned int vci, - IxAtmdAccAalType aalServiceType, - IxAtmRxQueueId rxQueueId, - IxAtmdAccUserId userCallbackId, - IxAtmdAccRxVcRxCallback rxCallback, - unsigned int minimumReplenishCount, - IxAtmConnId * connIdPtr, - IxAtmNpeRxVcId * npeVcIdPtr ) - * - * @brief Connect to a Aal Pdu receive service for a particular - * port/vpi/vci, and service type. - * - * This function allows a user to connect to an Aal5/Aal0/OAM Pdu receive service - * for a particular port/vpi/vci. It registers the callback and allocates - * internal resources and a Connection Id to be used in further API calls - * related to this VCC. - * - * The function will setup VC receive service on the specified rx queue. - * - * This function is blocking and makes use internal locks, and hence - * should not be called from an interrupt context. - * - * On return from @a ixAtmdAccRxVcConnect() with a failure status, the - * connection Id parameter is unspecified. Its value cannot be used. - * A connId is the reference by which IxAtmdAcc refers to a - * connected VC. This identifier is the result of a succesful call - * to a connect function. This identifier is invalid after a - * sucessful call to a disconnect function. - * - * Calling this function for the same combination of Vpi, Vci and more - * than once without calling @a ixAtmdAccRxVcTryDisconnect() will result in a - * failure status. - * - * If this function returns success the user should supply receive - * buffers by calling @a ixAtmdAccRxVcFreeReplenish() and then call - * @a ixAtmdAccRxVcEnable() to begin receiving pdus. - * - * There is a choice of two receive Qs on which the VC pdus could be - * receive. The user must associate the VC with one of these. Essentially - * having two qs allows more flexible system configuration such as have - * high prioriy traffic on one q (e.g. voice) and low priority traffic on - * the other (e.g. data). The high priority Q could be serviced in - * preference to the low priority Q. One queue may be configured to be - * serviced as soon as there is traffic, the other queue may be configured - * to be serviced by a polling mechanism running at idle time. - * - * Two AAL0 services supporting 48 or 52 byte cell data are provided. - * Received AAL0 PDUs will be be a multiple of the cell data size (48/52). - * AAL0_52 is a raw cell service and includes an ATM cell header - * (excluding HEC) at the start of each cell. - * - * A single "OAM Rx channel" for all ports may be enabled by - * establishing a dedicated OAM Rx connection. - * - * The OAM service allows buffers containing 52 byte OAM F4/F5 cells - * to be transmitted and received over the dedicated OAM channels. - * HEC is appended/removed, and CRC-10 performed by the NPE. The OAM - * service offered by AtmdAcc is a raw cell transport service. - * It is assumed that ITU I.610 procedures that make use of this - * service are implemented above AtmdAcc. - * - * Note that the dedicated OAM connections are established on - * reserved VPI,VCI, and (in the case of Rx) port values. - * These values are used purely to descriminate the dedicated OAM channels - * and do not identify a particular OAM F4/F5 flow. F4/F5 flows may be - * realised for particluar VPI/VCIs by manipulating the VPI,VCI - * fields of the ATM cell headers of cells in the buffers passed - * to AtmdAcc. - * - * Calling this function prior to enable the port will fail. - * - * @sa ixAtmdAccRxDispatch - * @sa ixAtmdAccRxVcEnable - * @sa ixAtmdAccRxVcDisable - * @sa ixAtmdAccRxVcTryDisconnect - * @sa ixAtmdAccPortEnable - * - * @param port @ref IxAtmLogicalPort [in] - VC identification : logical PHY port - * [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * @param vpi unsigned int [in] - VC identification : ATM Vpi [0..255] or IX_ATMDACC_OAM_VPI - * @param vci unsigned int [in] - VC identification : ATM Vci [0..65535] or IX_ATMDACC_OAM_VCI - * @param aalServiceType @ref IxAtmdAccAalType [in] - type of service: AAL5, AAL0_48, AAL0_52, or OAM - * @param rxQueueId @ref IxAtmRxQueueId [in] - this identifieds which of two Qs the VC - * should use.when icoming traffic is processed - * @param userCallbackId @ref IxAtmdAccUserId [in] - user Id used later as a parameter to - * the supplied rxCallback. - * @param rxCallback [in] @ref IxAtmdAccRxVxRxCallback - function called when mbufs are received. - * This parameter cannot be a null pointer. - * @param bufferFreeCallback [in] - function to be called to return - * ownership of buffers to IxAtmdAcc user. - * @param minimumReplenishCount unsigned int [in] - For AAL5/AAL0 the number of free mbufs - * to be used with this channel. Use a high number when the expected traffic - * rate on this channel is high, or when the user's mbufs are small, or when - * the RxVcFreeLow Notification has to be invoked less often. When this - * value is IX_ATMDACC_DEFAULT_REPLENISH_COUNT, the minimum of - * resources will be used. Depending on traffic rate, pdu - * size and mbuf size, rxfree queue size, polling/interrupt rate, this value may - * require to be replaced by a different value in the range 1-128 - * For OAM the rxFree queue size is fixed by atmdAcc and this parameter is ignored. - * @param connIdPtr @ref IxAtmConnId [out] - pointer to a connection Id - * This parameter cannot be a null pointer. - * @param npeVcIdPtr @ref IxAtmNpeRxVcId [out] - pointer to an npe Vc Id - * This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS successful call to IxAtmdAccRxVcConnect - * @return @li IX_ATMDACC_BUSY cannot process this request : - * no VC is available - * @return @li IX_FAIL - * parameter error, - * VC already in use, - * attempt to connect AAL service on reserved OAM VPI/VCI, - * attempt to connect OAM service on VPI/VCI other than the reserved OAM VPI/VCI, - * port is not initialised, - * or some other error occurs during processing. - * - */ -PUBLIC IX_STATUS ixAtmdAccRxVcConnect (IxAtmLogicalPort port, - unsigned int vpi, - unsigned int vci, - IxAtmdAccAalType aalServiceType, - IxAtmRxQueueId rxQueueId, - IxAtmdAccUserId userCallbackId, - IxAtmdAccRxVcRxCallback rxCallback, - unsigned int minimumReplenishCount, - IxAtmConnId * connIdPtr, - IxAtmNpeRxVcId * npeVcIdPtr ); - -/** - * - * @ingroup IxAtmdAccAPI - * - * @fn ixAtmdAccRxVcFreeReplenish (IxAtmConnId connId, - IX_OSAL_MBUF * mbufPtr) - * - * @brief Provide free mbufs for data reception on a connection. - * - * This function provides mbufs for data reception by the hardware. This - * function needs to be called by the user on a regular basis to ensure - * no packet loss. Providing free buffers is a connection-based feature; - * each connection can have different requirements in terms of buffer size - * number of buffers, recycling rate. This function could be invoked from - * within the context of a @a IxAtmdAccRxVcFreeLowCallback() callback - * for a particular VC - * - * Mbufs provided through this function call can be chained. They will be - * unchained internally. A call to this function with chained mbufs or - * multiple calls with unchained mbufs are equivalent, but calls with - * unchained mbufs are more efficients. - * - * Mbufs provided to this interface need to be able to hold at least one - * full cell payload (48/52 bytes, depending on service type). - * Chained buffers with a size less than the size supported by the hardware - * will be returned through the rx callback provided during the connect step. - * - * Failing to invoke this function prior to enabling the RX traffic - * can result in packet loss. - * - * This function is not reentrant for the same connId. - * - * This function does not use system resources and can be - * invoked from an interrupt context. - * - * @note - Over replenish is detected, and extra mbufs are returned through - * the rx callback provided during the connect step. - * - * @note - Mbuf provided to the replenish function should have a length greater or - * equal to 48/52 bytes according to service type. - * - * @note - The memory cache of mMbuf payload should be invalidated prior to Mbuf - * submission. Flushing the Mbuf headers is handled by IxAtmdAcc. - * - * @note - When a chained mbuf is provided, this function process the mbufs - * up to the hardware limit and invokes the user-supplied callback - * to release extra buffers. - * - * @sa ixAtmdAccRxVcFreeLowCallbackRegister - * @sa IxAtmdAccRxVcFreeLowCallback - * @sa ixAtmdAccRxVcConnect - * - * @param connId @ref IxAtmConnId [in] - connection Id as returned from a succesfull call to - * @a IxAtmdAccRxVcConnect() - * @param mbufPtr @ref IX_OSAL_MBUF [in] - pointer to a mbuf structure to be used for data - * reception. The mbuf pointed to by this parameter can be chained - * to an other mbuf. - * - * @return @li IX_SUCCESS successful call to @a ixAtmdAccRxVcFreeReplenish() - * and the mbuf is now ready to use for incoming traffic. - * @return @li IX_ATMDACC_BUSY cannot process this request because - * the max number of outstanding free buffers has been reached - * or the internal resources have exhausted for this VC. - * The user is responsible for retrying this request later. - * @return @li IX_FAIL cannot process this request because of parameter - * errors or some unspecified internal error has occurred. - * - * @note - It is not always guaranteed the replenish step to be as fast as the - * hardware is consuming Rx Free mbufs. There is nothing in IxAtmdAcc to - * guarantee that replenish reaches the rxFree threshold level. If the - * threshold level is not reached, the next rxFree low notification for - * this channel will not be triggered. - * The preferred ways to replenish can be as follows (depending on - * applications and implementations) : - * @li Replenish in a rxFree low notification until the function - * ixAtmdAccRxVcFreeReplenish() returns IX_ATMDACC_BUSY - * @li Query the queue level using @sa ixAtmdAccRxVcFreeEntriesQuery, then - * , replenish using @a ixAtmdAccRxVcFreeReplenish(), then query the queue - * level again, and replenish if the threshold is still not reached. - * @li Trigger replenish from an other event source and use rxFree starvation - * to throttle the Rx traffic. - * - */ -PUBLIC IX_STATUS ixAtmdAccRxVcFreeReplenish (IxAtmConnId connId, - IX_OSAL_MBUF * mbufPtr); - -/** - * - * @ingroup IxAtmdAccAPI - * - * @fn ixAtmdAccRxVcFreeLowCallbackRegister (IxAtmConnId connId, - unsigned int numberOfMbufs, - IxAtmdAccRxVcFreeLowCallback callback) - * - * @brief Configure the RX Free threshold value and register a callback - * to handle threshold notifications. - * - * The function ixAtmdAccRxVcFreeLowCallbackRegister sets the threshold value for - * a particular RX VC. When the number of buffers reaches this threshold - * the callback is invoked. - * - * This function should be called once per VC before RX traffic is - * enabled.This function will fail if the curent level of the free buffers - * is equal or less than the threshold value. - * - * @sa ixAtmdAccRxVcFreeLowCallbackRegister - * @sa IxAtmdAccRxVcFreeLowCallback - * @sa ixAtmdAccRxVcFreeReplenish - * @sa ixAtmdAccRxVcFreeEntriesQuery - * @sa ixAtmdAccRxVcConnect - * - * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call - * to @a IxAtmdAccRxVcConnect() - * @param numberOfMbufs unsigned int [in] - threshold number of buffers. This number - * has to be a power of 2, one of the values 0,1,2,4,8,16,32.... - * The maximum value cannot be more than half of the rxFree queue - * size (which can be retrieved using @a ixAtmdAccRxVcFreeEntriesQuery() - * before any use of the @a ixAtmdAccRxVcFreeReplenish() function) - * @param callback @ref IxAtmdAccRxVcFreeLowCallback [in] - function telling the user that the number of - * free buffers has reduced to the threshold value. - * - * @return @li IX_SUCCESS Threshold set successfully. - * @return @li IX_FAIL parameter error or the current number of free buffers - * is less than or equal to the threshold supplied or some - * unspecified error has occrred. - * - * @note - the callback will be called when the threshold level will drop from - * exactly (numberOfMbufs + 1) to (numberOfMbufs). - * - */ -PUBLIC IX_STATUS ixAtmdAccRxVcFreeLowCallbackRegister (IxAtmConnId connId, - unsigned int numberOfMbufs, - IxAtmdAccRxVcFreeLowCallback callback); - -/** - * - * @ingroup IxAtmdAccAPI - * - * @fn ixAtmdAccRxVcFreeEntriesQuery (IxAtmConnId connId, - unsigned int *numberOfMbufsPtr) - * - * @brief Get the number of rx mbufs the system can accept to replenish the - * the rx reception mechanism on a particular channel - * - * The ixAtmdAccRxVcFreeEntriesQuery function is used to retrieve the current - * number of available mbuf entries for reception, on a per-VC basis. This - * function can be used to know the number of mbufs which can be provided - * using @a ixAtmdAccRxVcFreeReplenish(). - * - * This function can be used from a timer context, or can be associated - * with a threshold event, or can be used inside an active polling - * mechanism which is under user control. - * - * This function is reentrant and does not use system resources and can - * be invoked from an interrupt context. - * - * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call - * to @a IxAtmdAccRxVcConnect() - * @param numberOfMbufsPtr unsigned int [out] - Pointer to the number of available entries. - * . This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS the current number of mbufs not yet used for incoming traffic - * @return @li IX_FAIL invalid parameter - * - * @sa ixAtmdAccRxVcFreeReplenish - * - */ -PUBLIC IX_STATUS ixAtmdAccRxVcFreeEntriesQuery (IxAtmConnId connId, - unsigned int *numberOfMbufsPtr); - -/** - * - * @ingroup IxAtmdAccAPI - * - * @fn ixAtmdAccRxVcEnable (IxAtmConnId connId) - * - * @brief Start the RX service on a VC. - * - * This functions kicks-off the traffic reception for a particular VC. - * Once invoked, incoming PDUs will be made available by the hardware - * and are eventually directed to the @a IxAtmdAccRxVcRxCallback() callback - * registered for the connection. - * - * If the traffic is already running, this function returns IX_SUCCESS. - * This function can be invoked many times. - * - * IxAtmdAccRxVcFreeLowCallback event will occur only after - * @a ixAtmdAccRxVcEnable() function is invoked. - * - * Before using this function, the @a ixAtmdAccRxVcFreeReplenish() function - * has to be used to replenish the RX Free queue. If not, incoming traffic - * may be discarded.and in the case of interrupt driven reception the - * @a IxAtmdAccRxVcFreeLowCallback() callback may be invoked as a side effect - * during a replenish action. - * - * This function is not reentrant and should not be used inside an - * interrupt context. - * - * For an VC connection this function can be called after a call to - * @a ixAtmdAccRxVcDisable() and should not be called after - * @a ixAtmdAccRxVcTryDisconnect() - * - * @sa ixAtmdAccRxVcDisable - * @sa ixAtmdAccRxVcConnect - * @sa ixAtmdAccRxVcFreeReplenish - * - * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call - * to @a IxAtmdAccRxVcConnect() - * - * @return @li IX_SUCCESS successful call to ixAtmdAccRxVcEnable - * @return @li IX_ATMDACC_WARNING the channel is already enabled - * @return @li IX_FAIL invalid parameters or some unspecified internal - * error occured. - * - */ -PUBLIC IX_STATUS ixAtmdAccRxVcEnable (IxAtmConnId connId); - -/** - * - * @ingroup IxAtmdAccAPI - * - * @fn ixAtmdAccRxVcDisable (IxAtmConnId connId) - * - * @brief Stop the RX service on a VC. - * - * This functions stops the traffic reception for a particular VC connection. - * - * Once invoked, incoming Pdus are discarded by the hardware. Any Pdus - * pending will be freed to the user - * - * Hence once this function returns no more receive callbacks will be - * called for that VC. However, buffer free callbacks will be invoked - * until such time as all buffers supplied by the user have been freed - * back to the user - * - * Calling this function doe not invalidate the connId. - * @a ixAtmdAccRxVcEnable() can be invoked to enable Pdu reception again. - * - * If the traffic is already stopped, this function returns IX_SUCCESS. - * - * This function is not reentrant and should not be used inside an - * interrupt context. - * - * @sa ixAtmdAccRxVcConnect - * @sa ixAtmdAccRxVcEnable - * @sa ixAtmdAccRxVcDisable - * - * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to @a - * IxAtmdAccRxVcConnect() - * - * @return @li IX_SUCCESS successful call to @a ixAtmdAccRxVcDisable(). - * @return @li IX_ATMDACC_WARNING the channel is already disabled - * @return @li IX_FAIL invalid parameters or some unspecified internal error occured - * - */ -PUBLIC IX_STATUS ixAtmdAccRxVcDisable (IxAtmConnId connId); - -/** - * - * @ingroup IxAtmdAccAPI - * - * @fn ixAtmdAccRxVcTryDisconnect (IxAtmConnId connId) - * - * @brief Disconnect a VC from the RX service. - * - * This function deregisters the VC and guarantees that all resources - * associated with this VC are free. After its execution, the connection - * Id is not available. - * - * This function will fail until such time as all resources allocated to - * the VC connection have been freed. The user is responsible to delay and - * call again this function many times until a success status is returned. - * - * This function needs internal locks and should not be called from an - * interrupt context - * - * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to - * @a IxAtmdAccRxVcConnect() - * - * @return @li IX_SUCCESS successful call to ixAtmdAccRxVcDisable - * @return @li IX_ATMDACC_RESOURCES_STILL_ALLOCATED not all resources - * associated with the connection have been freed. - * @return @li IX_FAIL cannot process this request because of a parameter - * error - * - */ -PUBLIC IX_STATUS ixAtmdAccRxVcTryDisconnect (IxAtmConnId connId); - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to TX traffic - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccAPI - * - * @fn ixAtmdAccTxVcConnect (IxAtmLogicalPort port, - unsigned int vpi, - unsigned int vci, - IxAtmdAccAalType aalServiceType, - IxAtmdAccUserId userId, - IxAtmdAccTxVcBufferReturnCallback bufferFreeCallback, - IxAtmConnId * connIdPtr) - * - * @brief Connect to a Aal Pdu transmit service for a particular - * port/vpi/vci and service type. - * - * This function allows a user to connect to an Aal5/Aal0/OAM Pdu transmit service - * for a particular port/vpi/vci. It registers the callback and allocates - * internal resources and a Connection Id to be used in further API calls - * related to this VC. - * - * The function will setup VC transmit service on the specified on the - * specified port. A connId is the reference by which IxAtmdAcc refers to a - * connected VC. This identifier is the result of a succesful call - * to a connect function. This identifier is invalid after a - * sucessful call to a disconnect function. - * - * This function needs internal locks, and hence should not be called - * from an interrupt context. - * - * On return from @a ixAtmdAccTxVcConnect() with a failure status, the - * connection Id parameter is unspecified. Its value cannot be used. - * - * Calling this function for the same combination of port, Vpi, Vci and - * more than once without calling @a ixAtmdAccTxVcTryDisconnect() will result - * in a failure status. - * - * Two AAL0 services supporting 48 or 52 byte cell data are provided. - * Submitted AAL0 PDUs must be a multiple of the cell data size (48/52). - * AAL0_52 is a raw cell service the client must format - * the PDU with an ATM cell header (excluding HEC) at the start of - * each cell, note that AtmdAcc does not validate the cell headers in - * a submitted PDU. - * - * For the OAM service an "OAM Tx channel" may be enabled for a port - * by establishing a single dedicated OAM Tx connection on that port. - * - * The OAM service allows buffers containing 52 byte OAM F4/F5 cells - * to be transmitted and received over the dedicated OAM channels. - * HEC is appended/removed, and CRC-10 performed by the NPE. The OAM - * service offered by AtmdAcc is a raw cell transport service. - * It is assumed that ITU I.610 procedures that make use of this - * service are implemented above AtmdAcc. - * - * Note that the dedicated OAM connections are established on - * reserved VPI,VCI, and (in the case of Rx) port values. - * These values are used purely to descriminate the dedicated OAM channels - * and do not identify a particular OAM F4/F5 flow. F4/F5 flows may be - * realised for particluar VPI/VCIs by manipulating the VPI,VCI - * fields of the ATM cell headers of cells in the buffers passed - * to AtmdAcc. - * - * Calling this function before enabling the port will fail. - * - * @sa ixAtmdAccTxVcTryDisconnect - * @sa ixAtmdAccPortTxScheduledModeEnable - * @sa ixAtmdAccPortEnable - * - * @param port @ref IxAtmLogicalPort [in] - VC identification : logical PHY port - * [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * @param vpi unsigned int [in] - VC identification : ATM Vpi [0..255] or IX_ATMDACC_OAM_VPI - * @param vci unsigned int [in] - VC identification : ATM Vci [0..65535] or IX_ATMDACC_OAM_VCI - * @param aalServiceType @ref IxAtmdAccAalType [in] - type of service AAL5, AAL0_48, AAL0_52, or OAM - * @param userId @ref IxAtmdAccUserId [in] - user id to be used later during callbacks related - * to this channel - * @param bufferFreeCallback @ref IxAtmdAccTxVcBufferReturnCallback [in] - function called when mbufs - * transmission is complete. This parameter cannot be a null - * pointer. - * @param connIdPtr @ref IxAtmConnId [out] - Pointer to a connection Id. - * This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS successful call to @a IxAtmdAccRxVcConnect(). - * @return @li IX_ATMDACC_BUSY cannot process this request - * because no VC is available - * @return @li IX_FAIL - * parameter error, - * VC already in use, - * attempt to connect AAL service on reserved OAM VPI/VCI, - * attempt to connect OAM service on VPI/VCI other than the reserved OAM VPI/VCI, - * port is not initialised, - * or some other error occurs during processing. - * - * @note - Unscheduled mode is not supported in ixp425 1.0. Therefore, the - * function @a ixAtmdAccPortTxScheduledModeEnable() need to be called - * for this port before any establishing a Tx Connection - */ -PUBLIC IX_STATUS ixAtmdAccTxVcConnect (IxAtmLogicalPort port, - unsigned int vpi, - unsigned int vci, - IxAtmdAccAalType aalServiceType, - IxAtmdAccUserId userId, - IxAtmdAccTxVcBufferReturnCallback bufferFreeCallback, - IxAtmConnId * connIdPtr); - -/** - * - * @ingroup IxAtmdAccAPI - * - * @fn ixAtmdAccTxVcPduSubmit (IxAtmConnId connId, - IX_OSAL_MBUF * mbufPtr, - IxAtmdAccClpStatus clp, - unsigned int numberOfCells) - * - * @brief Submit a Pdu for transmission on connection. - * - * A data user calls this function to submit an mbufs containing a Pdu - * to be transmitted. The buffer supplied can be chained and the Pdu it - * contains must be complete. - * - * The transmission behavior of this call depends on the operational mode - * of the port on which the connection is made. - * - * In unscheduled mode the mbuf will be submitted to the hardware - * immediately if sufficent resource is available. Otherwise the function - * will return failure. - * - * In scheduled mode the buffer is queued internally in IxAtmdAcc. The cell - * demand is made known to the traffic shaping entity. Cells from the - * buffers are MUXed onto the port some time later as dictated by the - * traffic shaping entity. The traffic shaping entity does this by sending - * transmit schedules to IxAtmdAcc via @a ixAtmdAccPortTxProcess() function call. - * - * Note that the dedicated OAM channel is scheduled just like any - * other channel. This means that any OAM traffic relating to an - * active AAL0/AAL5 connection will be scheduled independantly of the - * AAL0/AAL5 traffic for that connection. - * - * When transmission is complete, the TX Done mechanism will give the - * owmnership of these buffers back to the customer. The tx done mechanism - * must be in operation before transmission is attempted. - * - * For AAL0/OAM submitted AAL0 PDUs must be a multiple of the cell data - * size (48/52). AAL0_52 and OAM are raw cell services, and the client - * must format the PDU with an ATM cell header (excluding HEC) at the - * start of each cell, note that AtmdAcc does not validate the cell headers in - * a submitted PDU. - * - * - * @sa IxAtmdAccTxVcBufferReturnCallback - * @sa ixAtmdAccTxDoneDispatch - * - * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to - * @a ixAtmdAccTxVcConnect() - * @param mbufPtr @ref IX_OSAL_MBUF [in] - pointer to a chained structure of mbufs to transmit. - * This parameter cannot be a null pointer. - * @param clp @ref IxAtmdAccClpStatus [in] - clp indication for this PDU. All cells of this pdu - * will be sent with the clp bit set - * @param numberOfCells unsigned int [in] - number of cells in the PDU. - * - * @return @li IX_SUCCESS successful call to @a ixAtmdAccTxVcPduSubmit() - * The pdu pointed by the mbufPtr parameter will be - * transmitted - * @return @li IX_ATMDACC_BUSY unable to process this request because - * internal resources are all used. The caller is responsible - * for retrying this request later. - * @return @li IX_FAIL unable to process this request because of error - * in the parameters (wrong connId supplied, - * or wrong mbuf pointer supplied), the total length of all buffers - * in the chain should be a multiple of the cell size - * ( 48/52 depending on the service type ), - * or unspecified error during processing - * - * @note - This function in not re-entrant for the same VC (e.g. : two - * thread cannot send PDUs for the same VC). But two threads can - * safely call this function with a different connection Id - * - * @note - In unscheduled mode, this function is not re-entrant on a per - * port basis. The size of pdus is limited to 8Kb. - * - * @note - 0-length mbufs should be removed from the chain before submission. - * The total length of the pdu (sdu + padding +trailer) has to be - * updated in the header of the first mbuf of a chain of mbufs. - * - * @note - Aal5 trailer information (UUI, CPI, SDU length) has to be supplied - * before submission. - * - * @note - The payload memory cache should be flushed, if needed, prior to - * transmission. Mbuf headers are flushed by IxAtmdAcc - * - * @note - This function does not use system resources and can be used - * inside an interrupt context - */ -PUBLIC IX_STATUS ixAtmdAccTxVcPduSubmit (IxAtmConnId connId, - IX_OSAL_MBUF * mbufPtr, - IxAtmdAccClpStatus clp, - unsigned int numberOfCells); - -/** - * - * @ingroup IxAtmdAccAPI - * - * @fn ixAtmdAccTxVcTryDisconnect (IxAtmConnId connId) - * - * @brief Disconnect from a Aal Pdu transmit service for a particular - * port/vpi/vci. - * - * This function deregisters the VC and guarantees that all resources - * associated with this VC are free. After its execution, the connection - * Id is not available. - * - * This function will fail until such time as all resources allocated to - * the VC connection have been freed. The user is responsible to delay - * and call again this function many times until a success status is - * returned. - * - * After its execution, the connection Id is not available. - * - * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to - * @a ixAtmdAccTxVcConnect() - * - * @return @li IX_SUCCESS successful call to @a ixAtmdAccTxVcTryDisconnect() - * @return @li IX_ATMDACC_RESOURCES_STILL_ALLOCATED not all resources - * associated with the connection have been freed. This condition will - * disappear after Tx and TxDone is complete for this channel. - * @return @li IX_FAIL unable to process this request because of errors - * in the parameters (wrong connId supplied) - * - * @note - This function needs internal locks and should not be called - * from an interrupt context - * - * @note - If the @a IX_ATMDACC_RESOURCES_STILL_ALLOCATED error does not - * clear after a while, this may be linked to a previous problem - * of cell overscheduling. Diabling the port and retry a disconnect - * will free the resources associated with this channel. - * - * @sa ixAtmdAccPortTxProcess - * - */ -PUBLIC IX_STATUS ixAtmdAccTxVcTryDisconnect (IxAtmConnId connId); - -#endif /* IXATMDACC_H */ - -/** - * @} defgroup IxAtmdAccAPI - */ - - diff --git a/drivers/net/npe/include/IxAtmdAccCtrl.h b/drivers/net/npe/include/IxAtmdAccCtrl.h deleted file mode 100644 index ecbb0059f5..0000000000 --- a/drivers/net/npe/include/IxAtmdAccCtrl.h +++ /dev/null @@ -1,1933 +0,0 @@ -/** - * @file IxAtmdAccCtrl.h - * - * @date 20-Mar-2002 - * - * @brief IxAtmdAcc Public API - * - * This file contains the public API of IxAtmdAcc, related to the - * control functions of the component. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/* ------------------------------------------------------ - Doxygen group definitions - ------------------------------------------------------ */ - -/** - * - * @defgroup IxAtmdAccCtrlAPI IXP400 ATM Driver Access (IxAtmdAcc) Control API - * - * @brief The public API for the IXP400 Atm Driver Control component - * - * IxAtmdAcc is the low level interface by which AAL PDU get transmitted - * to,and received from the Utopia bus - * - * This part is related to the Control configuration - * - * @{ - */ - -#ifndef IXATMDACCCTRL_H -#define IXATMDACCCTRL_H - -#include "IxAtmdAcc.h" - -/* ------------------------------------------------------ - AtmdAccCtrl Data Types definition - ------------------------------------------------------ */ - -/** -* -* @ingroup IxAtmdAccCtrlAPI -* -* @def IX_ATMDACC_PORT_DISABLE_IN_PROGRESS -* -* @brief Port enable return code -* -* This constant is used to tell IxAtmDAcc user that the port disable -* functions are not complete. The user can call ixAtmdAccPortDisableComplete() -* to find out when the disable has finished. The port enable can then proceed. -* -*/ -#define IX_ATMDACC_PORT_DISABLE_IN_PROGRESS 5 - -/** -* -* @ingroup IxAtmdAccCtrlAPI -* -* @def IX_ATMDACC_ALLPDUS -* -* @brief All PDUs -* -* This constant is used to tell IxAtmDAcc to process all PDUs from -* the RX queue or the TX Done -* -* @sa IxAtmdAccRxDispatcher -* @sa IxAtmdAccTxDoneDispatcher -* -*/ -#define IX_ATMDACC_ALLPDUS 0xffffffff - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to RX traffic - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @brief Callback prototype for notification of available PDUs for - * an Rx Q. - * - * This a protoype for a function which is called when there is at - * least one Pdu available for processing on a particular Rx Q. - * - * This function should call @a ixAtmdAccRxDispatch() with - * the aprropriate number of parameters to read and process the Rx Q. - * - * @sa ixAtmdAccRxDispatch - * @sa ixAtmdAccRxVcConnect - * @sa ixAtmdAccRxDispatcherRegister - * - * @param rxQueueId @ref IxAtmRxQueueId [in] indicates which RX queue to has Pdus to process. - * @param numberOfPdusToProcess unsigned int [in] indicates the minimum number of - * PDUs available to process all PDUs from the queue. - * @param reservedPtr unsigned int* [out] pointer to a int location which can - * be written to, but does not retain written values. This is - * provided to make this prototype compatible - * with @a ixAtmdAccRxDispatch() - * - * @return @li int - ignored. - * - */ -typedef IX_STATUS (*IxAtmdAccRxDispatcher) (IxAtmRxQueueId rxQueueId, - unsigned int numberOfPdusToProcess, - unsigned int *reservedPtr); - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to TX traffic - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @brief Callback prototype for transmitted mbuf when threshold level is - * crossed. - * - * IxAtmdAccTxDoneDispatcher is the prototype of the user function - * which get called when pdus are completely transmitted. This function - * is likely to call the @a ixAtmdAccTxDoneDispatch() function. - * - * This function is called when the number of available pdus for - * reception is crossing the threshold level as defined - * in @a ixAtmdAccTxDoneDispatcherRegister() - * - * This function is called inside an Qmgr dispatch context. No system - * resource or interrupt-unsafe feature should be used inside this - * callback. - * - * Transmitted buffers recycling implementation is a sytem-wide mechanism - * and needs to be set before any traffic is started. If this threshold - * mechanism is not used, the user is responsible for polling the - * transmitted buffers with @a ixAtmdAccTxDoneDispatch() - * and @a ixAtmdAccTxDoneLevelQuery() functions. - * - * @sa ixAtmdAccTxDoneDispatcherRegister - * @sa ixAtmdAccTxDoneDispatch - * @sa ixAtmdAccTxDoneLevelQuery - * - * @param numberOfPdusToProcess unsigned int [in] - The current number of pdus currently - * available for recycling - * @param *reservedPtr unsigned int [out] - pointer to a int location which can be - * written to but does not retain written values. This is provided - * to make this prototype compatible - * with @a ixAtmdAccTxDoneDispatch() - * - * @return @li IX_SUCCESS This is provided to make - * this prototype compatible with @a ixAtmdAccTxDoneDispatch() - * @return @li IX_FAIL invalid parameters or some unspecified internal - * error occured. This is provided to make - * this prototype compatible with @a ixAtmdAccTxDoneDispatch() - * - */ -typedef IX_STATUS (*IxAtmdAccTxDoneDispatcher) (unsigned int numberOfPdusToProcess, - unsigned int *reservedPtr); - -/** -* -* @ingroup IxAtmdAccCtrlAPI -* -* @brief Notification that the threshold number of scheduled cells -* remains in a port's transmit Q. -* -* The is the prototype for of the user notification function which -* gets called on a per-port basis, when the number of remaining -* scheduled cells to be transmitted decreases to the threshold level. -* The number of cells passed as a parameter can be used for scheduling -* purposes as the maximum number of cells that can be passed in a -* schedule table to the @a ixAtmdAccPortTxProcess() function. -* -* @sa ixAtmdAccPortTxCallbackRegister -* @sa ixAtmdAccPortTxProcess -* @sa ixAtmdAccPortTxFreeEntriesQuery -* -* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] -* @param numberOfAvailableCells unsigned int [in] - number of available -* cell entries.for the port -* -* @note - This functions shall not use system resources when used -* inside an interrupt context. -* -*/ -typedef void (*IxAtmdAccPortTxLowCallback) (IxAtmLogicalPort port, - unsigned int numberOfAvailableCells); - -/** -* -* @ingroup IxAtmdAccCtrlAPI -* -* @brief Prototype to submit cells for transmission -* -* IxAtmdAccTxVcDemandUpdateCallback is the prototype of the callback -* function used by AtmD to notify an ATM Scheduler that the user of -* a VC has submitted cells for transmission. -* -* @sa IxAtmdAccTxVcDemandUpdateCallback -* @sa IxAtmdAccTxVcDemandClearCallback -* @sa IxAtmdAccTxSchVcIdGetCallback -* @sa ixAtmdAccPortTxScheduledModeEnable -* -* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be updated -* is established -* @param vcId int [in] - Identifies the VC to be updated. This is the value -* returned by the @a IxAtmdAccTxSchVcIdGetCallback() call . -* @param numberOfCells unsigned int [in] - Indicates how many ATM cells should be added -* to the queue for this VC. -* -* @return @li IX_SUCCESS the function is registering the cell demand for -* this VC. -* @return @li IX_FAIL the function cannot register cell for this VC : the -* scheduler maybe overloaded or misconfigured -* -*/ -typedef IX_STATUS (*IxAtmdAccTxVcDemandUpdateCallback) (IxAtmLogicalPort port, - int vcId, - unsigned int numberOfCells); - -/** -* -* @ingroup IxAtmdAccCtrlAPI -* -* @brief prototype to remove all currently queued cells from a -* registered VC -* -* IxAtmdAccTxVcDemandClearCallback is the prototype of the function -* to remove all currently queued cells from a registered VC. The -* pending cell count for the specified VC is reset to zero. After the -* use of this callback, the scheduler shall not schedule more cells -* for this VC. -* -* This callback function is called during a VC disconnection -* @a ixAtmdAccTxVcTryDisconnect() -* -* @sa IxAtmdAccTxVcDemandUpdateCallback -* @sa IxAtmdAccTxVcDemandClearCallback -* @sa IxAtmdAccTxSchVcIdGetCallback -* @sa ixAtmdAccPortTxScheduledModeEnable -* @sa ixAtmdAccTxVcTryDisconnect -* -* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be cleared -* is established -* @param vcId int [in] - Identifies the VC to be cleared. This is the value -* returned by the @a IxAtmdAccTxSchVcIdGetCallback() call . -* -* @return none -* -*/ -typedef void (*IxAtmdAccTxVcDemandClearCallback) (IxAtmLogicalPort port, - int vcId); - -/** -* -* @ingroup IxAtmdAccCtrlAPI -* -* @brief prototype to get a scheduler vc id -* -* IxAtmdAccTxSchVcIdGetCallback is the prototype of the function to get -* a scheduler vcId -* -* @sa IxAtmdAccTxVcDemandUpdateCallback -* @sa IxAtmdAccTxVcDemandClearCallback -* @sa IxAtmdAccTxSchVcIdGetCallback -* @sa ixAtmdAccPortTxScheduledModeEnable -* -* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM logical port on which the VC is -* established -* @param vpi unsigned int [in] - For AAL0/AAL5 specifies the ATM vpi on which the -* VC is established. -* For OAM specifies the dedicated "OAM Tx channel" VPI. -* @param vci unsigned int [in] - For AAL0/AAL5 specifies the ATM vci on which the -* VC is established. -* For OAM specifies the dedicated "OAM Tx channel" VCI. -* @param connId @ref IxAtmConnId [in] - specifies the IxAtmdAcc connection Id already -* associated with this VC -* @param vcId int* [out] - pointer to a vcId -* -* @return @li IX_SUCCESS the function is returning a Scheduler vcId for this -* VC -* @return @li IX_FAIL the function cannot process scheduling for this VC. -* the contents of vcId is unspecified -* -*/ -typedef IX_STATUS (*IxAtmdAccTxSchVcIdGetCallback) (IxAtmLogicalPort port, - unsigned int vpi, - unsigned int vci, - IxAtmConnId connId, - int *vcId); - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to RX traffic - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccRxDispatcherRegister ( - IxAtmRxQueueId queueId, - IxAtmdAccRxDispatcher callback) - * - * @brief Register a notification callback to be invoked when there is - * at least one entry on a particular Rx queue. - * - * This function registers a callback to be invoked when there is at - * least one entry in a particular queue. The registered callback is - * called every time when the hardware adds one or more pdus to the - * specified Rx queue. - * - * This function cannot be used when a Rx Vc using this queue is - * already existing. - * - * @note -The callback function can be the API function - * @a ixAtmdAccRxDispatch() : every time the threhold level - * of the queue is reached, the ixAtmdAccRxDispatch() is - * invoked to remove all entries from the queue. - * - * @sa ixAtmdAccRxDispatch - * @sa IxAtmdAccRxDispatcher - * - * @param queueId @ref IxAtmRxQueueId [in] RX queue identification - * @param callback @ref IxAtmdAccRxDispatcher [in] function triggering the delivery of incoming - * traffic. This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS Successful call to @a ixAtmdAccRxDispatcherRegister() - * @return @li IX_FAIL error in the parameters, or there is an - * already active RX VC for this queue or some unspecified - * internal error occurred. - * - */ -PUBLIC IX_STATUS ixAtmdAccRxDispatcherRegister ( - IxAtmRxQueueId queueId, - IxAtmdAccRxDispatcher callback); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccRxDispatch (IxAtmRxQueueId rxQueueId, - unsigned int numberOfPdusToProcess, - unsigned int *numberOfPdusProcessedPtr) - * - * - * @brief Control function which executes Rx processing for a particular - * Rx stream. - * - * The @a IxAtmdAccRxDispatch() function is used to process received Pdus - * available from one of the two incoming RX streams. When this function - * is invoked, the incoming traffic (up to the number of PDUs passed as - * a parameter) will be transferred to the IxAtmdAcc users through the - * callback @a IxAtmdAccRxVcRxCallback(), as registered during the - * @a ixAtmdAccRxVcConnect() call. - * - * The user receive callbacks will be executed in the context of this - * function. - * - * Failing to use this function on a regular basis when there is traffic - * will block incoming traffic and can result in Pdus being dropped by - * the hardware. - * - * This should be used to control when received pdus are handed off from - * the hardware to Aal users from a particluar stream. The function can - * be used from a timer context, or can be registered as a callback in - * response to an rx stream threshold event, or can be used inside an - * active polling mechanism which is under user control. - * - * @note - The signature of this function is directly compatible with the - * callback prototype which can be register with @a ixAtmdAccRxDispatcherRegister(). - * - * @sa ixAtmdAccRxDispatcherRegister - * @sa IxAtmdAccRxVcRxCallback - * @sa ixAtmdAccRxVcFreeEntriesQuery - * - * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which RX queue to process. - * @param numberOfPdusToProcess unsigned int [in] - indicates the maxiumum number of PDU to - * remove from the RX queue. A value of IX_ATMDACC_ALLPDUS indicates - * to process all PDUs from the queue. This includes at least the PDUs - * in the queue when the fuction is invoked. Because of real-time - * constraints, there is no guarantee thatthe queue will be empty - * when the function exits. If this parameter is greater than the - * number of entries of the queues, the function will succeed - * and the parameter numberOfPdusProcessedPtr will reflect the exact - * number of PDUs processed. - * @param *numberOfPdusProcessedPtr unsigned int [out] - indicates the actual number of PDU - * processed during this call. This parameter cannot be a null - * pointer. - * - * @return @li IX_SUCCESS the number of PDUs as indicated in - * numberOfPdusProcessedPtr are removed from the RX queue and the VC callback - * are called. - * @return @li IX_FAIL invalid parameters or some unspecified internal - * error occured. - * - */ -PUBLIC IX_STATUS ixAtmdAccRxDispatch (IxAtmRxQueueId rxQueueId, - unsigned int numberOfPdusToProcess, - unsigned int *numberOfPdusProcessedPtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccRxLevelQuery (IxAtmRxQueueId rxQueueId, - unsigned int *numberOfPdusPtr) - * - * @brief Query the number of entries in a particular RX queue. - * - * This function is used to retrieve the number of pdus received by - * the hardware and ready for distribution to users. - * - * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which of two RX queues to query. - * @param numberOfPdusPtr unsigned int* [out] - Pointer to store the number of available - * PDUs in the RX queue. This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS the value in numberOfPdusPtr specifies the - * number of incoming pdus waiting in this queue - * @return @li IX_FAIL an error occurs during processing. - * The value in numberOfPdusPtr is unspecified. - * - * @note - This function is reentrant, doesn't use system resources - * and can be used from an interrupt context. - * - */ -PUBLIC IX_STATUS ixAtmdAccRxLevelQuery (IxAtmRxQueueId rxQueueId, - unsigned int *numberOfPdusPtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccRxQueueSizeQuery (IxAtmRxQueueId rxQueueId, - unsigned int *numberOfPdusPtr) - * - * @brief Query the size of a particular RX queue. - * - * This function is used to retrieve the number of pdus the system is - * able to queue when reception is complete. - * - * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which of two RX queues to query. - * @param numberOfPdusPtr unsigned int* [out] - Pointer to store the number of pdus - * the system is able to queue in the RX queue. This parameter - * cannot be a null pointer. - * - * @return @li IX_SUCCESS the value in numberOfPdusPtr specifies the - * number of pdus the system is able to queue. - * @return @li IX_FAIL an error occurs during processing. - * The value in numberOfPdusPtr is unspecified. - * - * @note - This function is reentrant, doesn't use system resources - * and can be used from an interrupt context. - * - */ -PUBLIC IX_STATUS ixAtmdAccRxQueueSizeQuery (IxAtmRxQueueId rxQueueId, - unsigned int *numberOfPdusPtr); - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to TX traffic - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccPortTxFreeEntriesQuery (IxAtmLogicalPort port, - unsigned int *numberOfCellsPtr) - * - * @brief Get the number of available cells the system can accept for - * transmission. - * - * The function is used to retrieve the number of cells that can be - * queued for transmission to the hardware. - * - * This number is based on the worst schedule table where one cell - * is stored in one schedule table entry, depending on the pdus size - * and mbuf size and fragmentation. - * - * This function doesn't use system resources and can be used from a - * timer context, or can be associated with a threshold event, or can - * be used inside an active polling mechanism - * - * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * @param numberOfCellsPtr unsigned int* [out] - number of available cells. - * This parameter cannot be a null pointer. - * - * @sa ixAtmdAccPortTxProcess - * - * @return @li IX_SUCCESS numberOfCellsPtr contains the number of cells that can be scheduled - * for this port. - * @return @li IX_FAIL error in the parameters, or some processing error - * occured. - * - */ -PUBLIC IX_STATUS ixAtmdAccPortTxFreeEntriesQuery (IxAtmLogicalPort port, - unsigned int *numberOfCellsPtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccPortTxCallbackRegister (IxAtmLogicalPort port, - unsigned int numberOfCells, - IxAtmdAccPortTxLowCallback callback) - * - * @brief Configure the Tx port threshold value and register a callback to handle - * threshold notifications. - * - * This function sets the threshold in cells - * - * @sa ixAtmdAccPortTxCallbackRegister - * @sa ixAtmdAccPortTxProcess - * @sa ixAtmdAccPortTxFreeEntriesQuery - * - * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * @param numberOfCells unsigned int [in] - threshold value which triggers the callback - * invocation, This number has to be one of the - * values 0,1,2,4,8,16,32 .... - * The maximum value cannot be more than half of the txVc queue - * size (which can be retrieved using @a ixAtmdAccPortTxFreeEntriesQuery() - * before any Tx traffic is sent for this port) - * @param callback @ref IxAtmdAccPortTxLowCallback [in] - callback function to invoke when the threshold - * level is reached. - * This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS Successful call to @a ixAtmdAccPortTxCallbackRegister() - * @return @li IX_FAIL error in the parameters, Tx channel already set for this port - * threshold level is not correct or within the range regarding the - * queue size:or unspecified error during processing: - * - * @note - This callback function get called when the threshold level drops from - * (numberOfCells+1) cells to (numberOfCells) cells - * - * @note - This function should be called during system initialisation, - * outside an interrupt context - * - */ -PUBLIC IX_STATUS ixAtmdAccPortTxCallbackRegister (IxAtmLogicalPort port, - unsigned int numberOfCells, - IxAtmdAccPortTxLowCallback callback); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccPortTxScheduledModeEnable (IxAtmLogicalPort port, - IxAtmdAccTxVcDemandUpdateCallback vcDemandUpdateCallback, - IxAtmdAccTxVcDemandClearCallback vcDemandClearCallback, - IxAtmdAccTxSchVcIdGetCallback vcIdGetCallback) - * - * @brief Put the port into Scheduled Mode - * - * This function puts the specified port into scheduled mode of - * transmission which means an external s/w entity controls the - * transmission of cells on this port. This faciltates traffic shaping on - * the port. - * - * Any buffers submitted on a VC for this port will be queued in IxAtmdAcc. - * The transmission of these buffers to and by the hardware will be driven - * by a transmit schedule submitted regulary in calls to - * @a ixAtmdAccPortTxProcess() by traffic shaping entity. - * - * The transmit schedule is expected to be dynamic in nature based on - * the demand in cells for each VC on the port. Hence the callback - * parameters provided to this function allow IxAtmdAcc to inform the - * shaping entity of demand changes for each VC on the port. - * - * By default a port is in Unscheduled Mode so if this function is not - * called, transmission of data is done without sheduling rules, on a - * first-come, first-out basis. - * - * Once a port is put in scheduled mode it cannot be reverted to - * un-scheduled mode. Note that unscheduled mode is not supported - * in ixp425 1.0 - * - * @note - This function should be called before any VCs have be - * connected on a port. Otherwise this function call will return failure. - * - * @note - This function uses internal locks and should not be called from - * an interrupt context - * - * @sa IxAtmdAccTxVcDemandUpdateCallback - * @sa IxAtmdAccTxVcDemandClearCallback - * @sa IxAtmdAccTxSchVcIdGetCallback - * @sa ixAtmdAccPortTxProcess - * - * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * @param vcDemandUpdateCallback @ref IxAtmdAccTxVcDemandUpdateCallback [in] - callback function used to update - * the number of outstanding cells for transmission. This parameter - * cannot be a null pointer. - * @param vcDemandClearCallback @ref IxAtmdAccTxVcDemandClearCallback [in] - callback function used to remove all - * clear the number of outstanding cells for a VC. This parameter - * cannot be a null pointer. - * @param vcIdGetCallback @ref IxAtmdAccTxSchVcIdGetCallback [in] - callback function used to exchange vc - * Identifiers between IxAtmdAcc and the entity supplying the - * transmit schedule. This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS scheduler registration is complete and the port - * is now in scheduled mode. - * @return @li IX_FAIL failed (wrong parameters, or traffic is already - * enabled on this port, possibly without ATM shaping) - * - */ -PUBLIC IX_STATUS ixAtmdAccPortTxScheduledModeEnable (IxAtmLogicalPort port, - IxAtmdAccTxVcDemandUpdateCallback vcDemandUpdateCallback, - IxAtmdAccTxVcDemandClearCallback vcDemandClearCallback, - IxAtmdAccTxSchVcIdGetCallback vcIdGetCallback); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccPortTxProcess (IxAtmLogicalPort port, - IxAtmScheduleTable* scheduleTablePtr) - * - * @brief Transmit queue cells to the H/W based on the supplied schedule - * table. - * - * This function @a ixAtmdAccPortTxProcess() process the schedule - * table provided as a parameter to the function. As a result cells are - * sent to the underlaying hardware for transmission. - * - * The schedule table is executed in its entirety or not at all. So the - * onus is on the caller not to submit a table containing more cells than - * can be transmitted at that point. The maximum numbers that can be - * transmitted is guaranteed to be the number of cells as returned by the - * function @a ixAtmdAccPortTxFreeEntriesQuery(). - * - * When the scheduler is invoked on a threshold level, IxAtmdAcc gives the - * minimum number of cells (to ensure the callback will fire again later) - * and the maximum number of cells that @a ixAtmdAccPortTxProcess() - * will be able to process (assuming the ATM scheduler is able - * to produce the worst-case schedule table, i.e. one entry per cell). - * - * When invoked ouside a threshold level, the overall number of cells of - * the schedule table should be less than the number of cells returned - * by the @a ixAtmdAccPortTxFreeEntriesQuery() function. - * - * After invoking the @a ixAtmdAccPortTxProcess() function, it is the - * user choice to query again the queue level with the function - * @a ixAtmdAccPortTxFreeEntriesQuery() and, depending on a new cell - * number, submit an other schedule table. - * - * IxAtmdAcc will check that the number of cells in the schedule table - * is compatible with the current transmit level. If the - * - * Obsolete or invalid connection Id will be silently discarded. - * - * This function is not reentrant for the same port. - * - * This functions doesn't use system resources and can be used inside an - * interrupt context. - * - * This function is used as a response to the hardware requesting more - * cells to transmit. - * - * @sa ixAtmdAccPortTxScheduledModeEnable - * @sa ixAtmdAccPortTxFreeEntriesQuery - * @sa ixAtmdAccPortTxCallbackRegister - * @sa ixAtmdAccPortEnable - * - * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * @param scheduleTablePtr @ref IxAtmScheduleTable* [in] - pointer to a scheduler update table. The - * content of this table is not modified by this function. This - * parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS the schedule table process is complete - * and cells are transmitted to the hardware - * @return @li IX_ATMDACC_WARNING : Traffic will be dropped: the schedule table exceed - * the hardware capacity If this error is ignored, further traffic - * and schedule will work correctly. - * Overscheduling does not occur when the schedule table does - * not contain more entries that the number of free entries returned - * by @a ixAtmdAccPortTxFreeEntriesQuery(). - * However, Disconnect attempts just after this error will fail permanently - * with the error code @a IX_ATMDACC_RESOURCES_STILL_ALLOCATED, and it is - * necessary to disable the port to make @a ixAtmdAccTxVcTryDisconnect() - * successful. - * @return @li IX_FAIL a wrong parameter is supplied, or the format of - * the schedule table is invalid, or the port is not Enabled, or - * an internal severe error occured. No cells is transmitted to the hardware - * - * @note - If the failure is linked to an overschedule of data cells - * the result is an inconsistency in the output traffic (one or many - * cells may be missing and the traffic contract is not respected). - * - */ -PUBLIC IX_STATUS ixAtmdAccPortTxProcess (IxAtmLogicalPort port, - IxAtmScheduleTable* scheduleTablePtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccTxDoneDispatch (unsigned int numberOfPdusToProcess, - unsigned int *numberOfPdusProcessedPtr) - * - * @brief Process a number of pending transmit done pdus from the hardware. - * - * As a by-product of Atm transmit operation buffers which transmission - * is complete need to be recycled to users. This function is invoked - * to service the oustanding list of transmitted buffers and pass them - * to VC users. - * - * Users are handed back pdus by invoking the free callback registered - * during the @a ixAtmdAccTxVcConnect() call. - * - * There is a single Tx done stream servicing all active Atm Tx ports - * which can contain a maximum of 64 entries. If this stream fills port - * transmission will stop so this function must be call sufficently - * frequently to ensure no disruption to the transmit operation. - * - * This function can be used from a timer context, or can be associated - * with a TxDone level threshold event (see @a ixAtmdAccTxDoneDispatcherRegister() ), - * or can be used inside an active polling mechanism under user control. - * - * For ease of use the signature of this function is compatible with the - * TxDone threshold event callback prototype. - * - * This functions can be used inside an interrupt context. - * - * @sa ixAtmdAccTxDoneDispatcherRegister - * @sa IxAtmdAccTxVcBufferReturnCallback - * @sa ixAtmdAccTxDoneLevelQuery - * - * @param numberOfPdusToProcess unsigned int [in] - maxiumum number of pdus to remove - * from the TX Done queue - * @param *numberOfPdusProcessedPtr unsigned int [out] - number of pdus removed from - * the TX Done queue. This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS the number of pdus as indicated in - * numberOfPdusToProcess are removed from the TX Done hardware - * and passed to the user through the Tx Done callback registered - * during a call to @a ixAtmdAccTxVcConnect() - * @return @li IX_FAIL invalid parameters or numberOfPdusProcessedPtr is - * a null pointer or some unspecified internal error occured. - * - */ -PUBLIC IX_STATUS -ixAtmdAccTxDoneDispatch (unsigned int numberOfPdusToProcess, - unsigned int *numberOfPdusProcessedPtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccTxDoneLevelQuery (unsigned int *numberOfPdusPtr) - * - * @brief Query the current number of transmit pdus ready for - * recycling. - * - * This function is used to get the number of transmitted pdus which - * the hardware is ready to hand back to user. - * - * This function can be used from a timer context, or can be associated - * with a threshold event, on can be used inside an active polling - * mechanism - * - * @sa ixAtmdAccTxDoneDispatch - * - * @param *numberOfPdusPtr unsigned int [out] - Pointer to the number of pdus transmitted - * at the time of this function call, and ready for recycling - * This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS numberOfPdusPtr contains the number of pdus - * ready for recycling at the time of this function call - * - * @return @li IX_FAIL wrong parameter (null pointer as parameter).or - * unspecified rocessing error occurs..The value in numberOfPdusPtr - * is unspecified. - * - */ -PUBLIC IX_STATUS -ixAtmdAccTxDoneLevelQuery (unsigned int *numberOfPdusPtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccTxDoneQueueSizeQuery (unsigned int *numberOfPdusPtr) - * - * @brief Query the TxDone queue size. - * - * This function is used to get the number of pdus which - * the hardware is able to store after transmission is complete - * - * The returned value can be used to set a threshold and enable - * a callback to be notified when the number of pdus is going over - * the threshold. - * - * @sa ixAtmdAccTxDoneDispatcherRegister - * - * @param *numberOfPdusPtr unsigned int [out] - Pointer to the number of pdus the system - * is able to queue after transmission - * - * @return @li IX_SUCCESS numberOfPdusPtr contains the the number of - * pdus the system is able to queue after transmission - * @return @li IX_FAIL wrong parameter (null pointer as parameter).or - * unspecified rocessing error occurs..The value in numberOfPdusPtr - * is unspecified. - * - * @note - This function is reentrant, doesn't use system resources - * and can be used from an interrupt context. - */ -PUBLIC IX_STATUS -ixAtmdAccTxDoneQueueSizeQuery (unsigned int *numberOfPdusPtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccTxDoneDispatcherRegister (unsigned int numberOfPdus, - IxAtmdAccTxDoneDispatcher notificationCallback) - * - * @brief Configure the Tx Done stream threshold value and register a - * callback to handle threshold notifications. - * - * This function sets the threshold level in term of number of pdus at - * which the supplied notification function should be called. - * - * The higher the threshold value is, the less events will be necessary - * to process transmitted buffers. - * - * Transmitted buffers recycling implementation is a sytem-wide mechanism - * and needs to be set prior any traffic is started. If this threshold - * mechanism is not used, the user is responsible for polling the - * transmitted buffers thanks to @a ixAtmdAccTxDoneDispatch() and - * @a ixAtmdAccTxDoneLevelQuery() functions. - * - * This function should be called during system initialisation outside - * an interrupt context - * - * @sa ixAtmdAccTxDoneDispatcherRegister - * @sa ixAtmdAccTxDoneDispatch - * @sa ixAtmdAccTxDoneLevelQuery - * - * @param numberOfPdus unsigned int [in] - The number of TxDone pdus which triggers the - * callback invocation This number has to be a power of 2, one of the - * values 0,1,2,4,8,16,32 ... - * The maximum value cannot be more than half of the txDone queue - * size (which can be retrieved using @a ixAtmdAccTxDoneQueueSizeQuery()) - * @param notificationCallback @ref IxAtmdAccTxDoneDispatcher [in] - The function to invoke. (This - * parameter can be @a ixAtmdAccTxDoneDispatch()).This - * parameter ust not be a null pointer. - * - * @return @li IX_SUCCESS Successful call to ixAtmdAccTxDoneDispatcherRegister - * @return @li IX_FAIL error in the parameters: - * - * @note - The notificationCallback will be called exactly when the threshold level - * will increase from (numberOfPdus) to (numberOfPdus+1) - * - * @note - If there is no Tx traffic, there is no guarantee that TxDone Pdus will - * be released to the user (when txDone level is permanently under the threshold - * level. One of the preffered way to return resources to the user is to use - * a mix of txDone notifications, used together with a slow - * rate timer and an exclusion mechanism protecting from re-entrancy - * - * @note - The TxDone threshold will only hand back buffers when the threshold level is - * crossed. Setting this threshold to a great number reduce the interrupt rate - * and the cpu load, but also increase the number of outstanding mbufs and has - * a system wide impact when these mbufs are needed by other components. - * - */ -PUBLIC IX_STATUS ixAtmdAccTxDoneDispatcherRegister (unsigned int numberOfPdus, - IxAtmdAccTxDoneDispatcher notificationCallback); - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to Utopia config - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @defgroup IxAtmdAccUtopiaCtrlAPI IXP400 ATM Driver Access (IxAtmdAcc) Utopia Control API - * - * @brief The public API for the IXP400 Atm Driver Control component - * - * IxAtmdAcc is the low level interface by which AAL PDU get - * transmitted to,and received from the Utopia bus - * - * This part is related to the UTOPIA configuration. - * - * @{ - */ - -/** - * - * @brief Utopia configuration - * - * This structure is used to set the Utopia parameters - * @li contains the values of Utopia registers, to be set during initialisation - * @li contains debug commands for NPE, to be used during development steps - * - * @note - the exact description of all parameters is done in the Utopia reference - * documents. - * - */ -typedef struct -{ - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxConfig_ - * @brief Utopia Tx Config Register - */ - struct UtTxConfig_ - { - - unsigned int reserved_1:1; /**< [31] These bits are always 0.*/ - unsigned int txInterface:1; /**< [30] Utopia Transmit Interface. The following encoding - * is used to set the Utopia Transmit interface as ATM master - * or PHY slave: - * @li 1 - PHY - * @li 0 - ATM - */ - unsigned int txMode:1; /**< [29] Utopia Transmit Mode. The following encoding is used - * to set the Utopia Transmit mode to SPHY or MPHY: - * @li 1 - SPHY - * @li 0 - MPHY - */ - unsigned int txOctet:1; /**< [28] Utopia Transmit cell transfer protocol. Used to set - * the Utopia cell transfer protocol to Octet-level handshaking. - * Note this is only applicable in SPHY mode. - * @li 1 - Octet-handshaking enabled - * @li 0 - Cell-handshaking enabled - */ - unsigned int txParity:1; /**< [27] Utopia Transmit parity enabled when set. TxEvenParity - * defines the parity format odd/even. - * @li 1 - Enable Parity generation. - * @li 0 - ut_op_prty held low. - */ - unsigned int txEvenParity:1; /**< [26] Utopia Transmit Parity Mode - * @li 1 - Even Parity Generated. - * @li 0 - Odd Parity Generated. - */ - unsigned int txHEC:1; /**< [25] Header Error Check Insertion Mode. Specifies if the transmit - * cell header check byte is calculated and inserted when set. - * @li 1 - Generate HEC. - * @li 0 - Disable HEC generation. - */ - unsigned int txCOSET:1; /**< [24] If enabled the HEC is Exclusive-OR'ed with the value 0x55 before - * being presented on the Utopia bus. - * @li 1 - Enable HEC ExOR with value 0x55 - * @li 0 - Use generated HEC value. - */ - - unsigned int reserved_2:1; /**< [23] These bits are always 0 - */ - unsigned int txCellSize:7; /**< [22:16] Transmit expected cell size. Configures the cell size - * for the transmit module: Values between 52-64 are valid. - */ - unsigned int reserved_3:3; /**< [15:13] These bits are always 0 */ - unsigned int txAddrRange:5; /**< [12:8] When configured as an ATM master in MPHY mode this - * register specifies the upper limit of the PHY polling logical - * range. The number of active PHYs are TxAddrRange + 1. - */ - unsigned int reserved_4:3; /**< [7:5] These bits are always 0 */ - unsigned int txPHYAddr:5; /**< [4:0] When configured as a slave in an MPHY system this register - * specifies the physical address of the PHY. - */ - } - - utTxConfig; /**< Tx config Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxStatsConfig_ - * @brief Utopia Tx stats Register - */ - struct UtTxStatsConfig_ - { - - unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0] - @li Note: if VCStatsTxGFC is set to 0 the GFC field is ignored in test. */ - - unsigned int vci:16; /**< [19:4] ATM VCI [15:0] or PHY Address[4] */ - - unsigned int pti:3; /**< [3:1] ATM PTI [2:0] or PHY Address[3:1] - @li Note: if VCStatsTxPTI is set to 0 the PTI field is ignored in test. - @li Note: if VCStatsTxEnb is set to 0 only the transmit PHY port - address as defined by this register is used for ATM statistics [4:0]. */ - - unsigned int clp:1; /**< [0] ATM CLP or PHY Address [0] - @li Note: if VCStatsTxCLP is set to 0 the CLP field is ignored in test. - @li Note: if VCStatsTxEnb is set to 0 only the transmit PHY port - address as defined by this register is used for ATM statistics [4:0]. */ - } - - utTxStatsConfig; /**< Tx stats config Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxDefineIdle_ - * @brief Utopia Tx idle cells Register - */ - struct UtTxDefineIdle_ - { - - unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0] - @li Note: if VCIdleTxGFC is set to 0 the GFC field is ignored in test. */ - - unsigned int vci:16; /**< [19:4] ATM VCI [15:0] */ - - unsigned int pti:3; /**< [3:1] ATM PTI PTI [2:0] - @li Note: if VCIdleTxPTI is set to 0 the PTI field is ignored in test.*/ - - unsigned int clp:1; /**< [0] ATM CLP [0] - @li Note: if VCIdleTxCLP is set to 0 the CLP field is ignored in test.*/ - } - - utTxDefineIdle; /**< Tx idle cell config Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxEnableFields_ - * @brief Utopia Tx ienable fields Register - */ - struct UtTxEnableFields_ - { - - unsigned int defineTxIdleGFC:1; /**< [31] This register is used to include or exclude the GFC - field of the ATM header when testing for Idle cells. - @li 1 - GFC field is valid. - @li 0 - GFC field ignored.*/ - - unsigned int defineTxIdlePTI:1; /**< [30] This register is used to include or exclude the PTI - field of the ATM header when testing for Idle cells. - @li 1 - PTI field is valid - @li 0 - PTI field ignored.*/ - - unsigned int defineTxIdleCLP:1; /**< [29] This register is used to include or - exclude the CLP field of the ATM header when testing for Idle cells. - @li 1 - CLP field is valid. - @li 0 - CLP field ignored. */ - - unsigned int phyStatsTxEnb:1; /**< [28] This register is used to enable or disable ATM - statistics gathering based on the specified PHY address as defined - in TxStatsConfig register. - @li 1 - Enable statistics for specified transmit PHY address. - @li 0 - Disable statistics for specified transmit PHY address. */ - - unsigned int vcStatsTxEnb:1; /**< [27] This register is used to change the ATM - statistics-gathering mode from the specified logical PHY address - to a specific VPI/VCI address. - @li 1 - Enable statistics for specified VPI/VCI address. - @li 0 - Disable statistics for specified VPI/VCI address */ - - unsigned int vcStatsTxGFC:1; /**< [26] This register is used to include or exclude the GFC - field of the ATM header when ATM VPI/VCI statistics are enabled. - GFC is only available at the UNI and uses the first 4-bits of - the VPI field. - @li 1 - GFC field is valid - @li 0 - GFC field ignored.*/ - - unsigned int vcStatsTxPTI:1; /**< [25] This register is used to include or exclude the PTI - field of the ATM header when ATM VPI/VCI statistics are enabled. - @li 1 - PTI field is valid - @li 0 - PTI field ignored.*/ - - unsigned int vcStatsTxCLP:1; /**< [24] This register is used to include or exclude the CLP - field of the ATM header when ATM VPI/VCI statistics are enabled. - @li 1 - CLP field is valid - @li 0 - CLP field ignored. */ - - unsigned int reserved_1:3; /**< [23-21] These bits are always 0 */ - - unsigned int txPollStsInt:1; /**< [20] Enable the assertion of the ucp_tx_poll_sts condition - where there is a change in polling status. - @li 1 - ucp_tx_poll_sts asserted whenever there is a change in status - @li 0 - ucp_tx_poll_sts asserted if ANY transmit PHY is available - */ - unsigned int txCellOvrInt:1; /**< [19] Enable TxCellCount overflow CBI Transmit Status condition - assertion. - @li 1 - If TxCellCountOvr is set assert the Transmit Status Condition. - @li 0 - No CBI Transmit Status condition assertion */ - - unsigned int txIdleCellOvrInt:1; /**< [18] Enable TxIdleCellCount overflow Transmit Status Condition - @li 1 - If TxIdleCellCountOvr is set assert the Transmit Status Condition - @li 0 - No CBI Transmit Status condition assertion..*/ - - unsigned int enbIdleCellCnt:1; /**< [17] Enable Transmit Idle Cell Count. - @li 1 - Enable count of Idle cells transmitted. - @li 0 - No count is maintained. */ - - unsigned int enbTxCellCnt:1; /**< [16] Enable Transmit Valid Cell Count of non-idle/non-error cells - @li 1 - Enable count of valid cells transmitted- non-idle/non-error - @li 0 - No count is maintained.*/ - - unsigned int reserved_2:16; /**< [15:0] These bits are always 0 */ - } utTxEnableFields; /**< Tx enable Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxTransTable0_ - * @brief Utopia Tx translation table Register - */ - struct UtTxTransTable0_ - { - - unsigned int phy0:5; /**< [31-27] Tx Mapping value of logical phy 0 */ - - unsigned int phy1:5; /**< [26-22] Tx Mapping value of logical phy 1 */ - - unsigned int phy2:5; /**< [21-17] Tx Mapping value of logical phy 2 */ - - unsigned int reserved_1:1; /**< [16] These bits are always 0.*/ - - unsigned int phy3:5; /**< [15-11] Tx Mapping value of logical phy 3 */ - - unsigned int phy4:5; /**< [10-6] Tx Mapping value of logical phy 4 */ - - unsigned int phy5:5; /**< [5-1] Tx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utTxTransTable0; /**< Tx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxTransTable1_ - * @brief Utopia Tx translation table Register - */ - struct UtTxTransTable1_ - { - - unsigned int phy6:5; /**< [31-27] Tx Mapping value of logical phy 6 */ - - unsigned int phy7:5; /**< [26-22] Tx Mapping value of logical phy 7 */ - - unsigned int phy8:5; /**< [21-17] Tx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy9:5; /**< [15-11] Tx Mapping value of logical phy 3 */ - - unsigned int phy10:5; /**< [10-6] Tx Mapping value of logical phy 4 */ - - unsigned int phy11:5; /**< [5-1] Tx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utTxTransTable1; /**< Tx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxTransTable2_ - * @brief Utopia Tx translation table Register - */ - struct UtTxTransTable2_ - { - - unsigned int phy12:5; /**< [31-27] Tx Mapping value of logical phy 6 */ - - unsigned int phy13:5; /**< [26-22] Tx Mapping value of logical phy 7 */ - - unsigned int phy14:5; /**< [21-17] Tx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy15:5; /**< [15-11] Tx Mapping value of logical phy 3 */ - - unsigned int phy16:5; /**< [10-6] Tx Mapping value of logical phy 4 */ - - unsigned int phy17:5; /**< [5-1] Tx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utTxTransTable2; /**< Tx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxTransTable3_ - * @brief Utopia Tx translation table Register - */ - struct UtTxTransTable3_ - { - - unsigned int phy18:5; /**< [31-27] Tx Mapping value of logical phy 6 */ - - unsigned int phy19:5; /**< [26-22] Tx Mapping value of logical phy 7 */ - - unsigned int phy20:5; /**< [21-17] Tx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy21:5; /**< [15-11] Tx Mapping value of logical phy 3 */ - - unsigned int phy22:5; /**< [10-6] Tx Mapping value of logical phy 4 */ - - unsigned int phy23:5; /**< [5-1] Tx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utTxTransTable3; /**< Tx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxTransTable4_ - * @brief Utopia Tx translation table Register - */ - struct UtTxTransTable4_ - { - - unsigned int phy24:5; /**< [31-27] Tx Mapping value of logical phy 6 */ - - unsigned int phy25:5; /**< [26-22] Tx Mapping value of logical phy 7 */ - - unsigned int phy26:5; /**< [21-17] Tx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy27:5; /**< [15-11] Tx Mapping value of logical phy 3 */ - - unsigned int phy28:5; /**< [10-6] Tx Mapping value of logical phy 4 */ - - unsigned int phy29:5; /**< [5-1] Tx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utTxTransTable4; /**< Tx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxTransTable5_ - * @brief Utopia Tx translation table Register - */ - struct UtTxTransTable5_ - { - - unsigned int phy30:5; /**< [31-27] Tx Mapping value of logical phy 6 */ - - unsigned int reserved_1:27; /**< [26-0] These bits are always 0 */ - - } utTxTransTable5; /**< Tx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxConfig_ - * @brief Utopia Rx config Register - */ - struct UtRxConfig_ - { - - unsigned int rxInterface:1; /**< [31] Utopia Receive Interface. The following encoding is used - to set the Utopia Receive interface as ATM master or PHY slave: - @li 1 - PHY - @li 0 - ATM */ - - unsigned int rxMode:1; /**< [30] Utopia Receive Mode. The following encoding is used to set - the Utopia Receive mode to SPHY or MPHY: - @li 1 - SPHY - @li 0 - MPHY */ - - unsigned int rxOctet:1; /**< [29] Utopia Receive cell transfer protocol. Used to set the Utopia - cell transfer protocol to Octet-level handshaking. Note this is only - applicable in SPHY mode. - @li 1 - Octet-handshaking enabled - @li 0 - Cell-handshaking enabled */ - - unsigned int rxParity:1; /**< [28] Utopia Receive Parity Checking enable. - @li 1 - Parity checking enabled - @li 0 - Parity checking disabled */ - - unsigned int rxEvenParity:1;/**< [27] Utopia Receive Parity Mode - @li 1 - Check for Even Parity - @li 0 - Check for Odd Parity.*/ - - unsigned int rxHEC:1; /**< [26] RxHEC Header Error Check Mode. Enables/disables cell header - error checking on the received cell header. - @li 1 - HEC checking enabled - @li 0 - HEC checking disabled */ - - unsigned int rxCOSET:1; /**< [25] If enabled the HEC is Exclusive-OR'ed with the value 0x55 - before being tested with the received HEC. - @li 1 - Enable HEC ExOR with value 0x55. - @li 0 - Use generated HEC value.*/ - - unsigned int rxHECpass:1; /**< [24] Specifies if the incoming cell HEC byte should be transferred - after optional processing to the NPE2 Coprocessor Bus Interface or - if it should be discarded. - @li 1 - HEC maintained 53-byte/UDC cell sent to NPE2. - @li 0 - HEC discarded 52-byte/UDC cell sent to NPE2 coprocessor.*/ - - unsigned int reserved_1:1; /**< [23] These bits are always 0 */ - - unsigned int rxCellSize:7; /**< [22:16] Receive cell size. Configures the receive cell size. - Values between 52-64 are valid */ - - unsigned int rxHashEnbGFC:1; /**< [15] Specifies if the VPI field [11:8]/GFC field should be - included in the Hash data input or if the bits should be padded - with 1'b0. - @li 1 - VPI [11:8]/GFC field valid and used in Hash residue calculation. - @li 0 - VPI [11:8]/GFC field padded with 1'b0 */ - - unsigned int rxPreHash:1; /**< [14] Enable Pre-hash value generation. Specifies if the - incoming cell data should be pre-hashed to allow VPI/VCI header look-up - in a hash table. - @li 1 - Pre-hashing enabled - @li 0 - Pre-hashing disabled */ - - unsigned int reserved_2:1; /**< [13] These bits are always 0 */ - - unsigned int rxAddrRange:5; /**< [12:8] In ATM master, MPHY mode, - * this register specifies the upper - * limit of the PHY polling logical range. The number of active PHYs are - * RxAddrRange + 1. - */ - unsigned int reserved_3:3; /**< [7-5] These bits are always 0 .*/ - unsigned int rxPHYAddr:5; /**< [4:0] When configured as a slave in an MPHY system this register - * specifies the physical address of the PHY. - */ - } utRxConfig; /**< Rx config Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxStatsConfig_ - * @brief Utopia Rx stats config Register - */ - struct UtRxStatsConfig_ - { - - unsigned int vpi:12; /**< [31:20] ATM VPI VPI [11:0] OR GFC [3:0] and VPI [7:0] - @li Note: if VCStatsRxGFC is set to 0 the GFC field is ignored in test. */ - - unsigned int vci:16; /**< [19:4] VCI [15:0] or PHY Address [4] */ - - unsigned int pti:3; /**< [3:1] PTI [2:0] or or PHY Address [3:1] - @li Note: if VCStatsRxPTI is set to 0 the PTI field is ignored in test. - @li Note: if VCStatsRxEnb is set to 0 only the PHY port address is used - for statistics gathering.. */ - - unsigned int clp:1; /**< [0] CLP [0] or PHY Address [0] - @li Note: if VCStatsRxCLP is set to 0 the CLP field is ignored in test. - @li Note: if VCStatsRxEnb is set to 0 only the PHY port address is used - for statistics gathering.. */ - } utRxStatsConfig; /**< Rx stats config Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxDefineIdle_ - * @brief Utopia Rx idle cells config Register - */ - struct UtRxDefineIdle_ - { - - unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0] - @li Note: if VCIdleRxGFC is set to 0 the GFC field is ignored in test. */ - - unsigned int vci:16; /**< [19:4] ATM VCI [15:0] */ - - unsigned int pti:3; /**< [3:1] ATM PTI PTI [2:0] - @li Note: if VCIdleRxPTI is set to 0 the PTI field is ignored in test.*/ - - unsigned int clp:1; /**< [0] ATM CLP [0] - @li Note: if VCIdleRxCLP is set to 0 the CLP field is ignored in test.*/ - } utRxDefineIdle; /**< Rx idle cell config Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxEnableFields_ - * @brief Utopia Rx enable Register - */ - struct UtRxEnableFields_ - { - - unsigned int defineRxIdleGFC:1;/**< [31] This register is used to include or exclude the GFC - field of the ATM header when testing for Idle cells. - @li 1 - GFC field is valid. - @li 0 - GFC field ignored.*/ - - unsigned int defineRxIdlePTI:1;/**< [30] This register is used to include or exclude the PTI - field of the ATM header when testing for Idle cells. - @li 1 - PTI field is valid. - @li 0 - PTI field ignored.*/ - - unsigned int defineRxIdleCLP:1;/**< [29] This register is used to include or exclude the CLP - field of the ATM header when testing for Idle cells. - @li 1 - CLP field is valid. - @li 0 - CLP field ignored.*/ - - unsigned int phyStatsRxEnb:1;/**< [28] This register is used to enable or disable ATM statistics - gathering based on the specified PHY address as defined in RxStatsConfig - register. - @li 1 - Enable statistics for specified receive PHY address. - @li 0 - Disable statistics for specified receive PHY address.*/ - - unsigned int vcStatsRxEnb:1;/**< [27] This register is used to enable or disable ATM statistics - gathering based on a specific VPI/VCI address. - @li 1 - Enable statistics for specified VPI/VCI address. - @li 0 - Disable statistics for specified VPI/VCI address.*/ - - unsigned int vcStatsRxGFC:1;/**< [26] This register is used to include or exclude the GFC field - of the ATM header when ATM VPI/VCI statistics are enabled. GFC is only - available at the UNI and uses the first 4-bits of the VPI field. - @li 1 - GFC field is valid. - @li 0 - GFC field ignored. */ - - unsigned int vcStatsRxPTI:1;/**< [25] This register is used to include or exclude the PTI field - of the ATM header when ATM VPI/VCI statistics are enabled. - @li 1 - PTI field is valid. - @li 0 - PTI field ignored.*/ - - unsigned int vcStatsRxCLP:1;/**< [24] This register is used to include or exclude the CLP field - of the ATM header when ATM VPI/VCI statistics are enabled. - @li 1 - CLP field is valid. - @li 0 - CLP field ignored. */ - - unsigned int discardHecErr:1;/**< [23] Discard cells with an invalid HEC. - @li 1 - Discard cells with HEC errors - @li 0 - Cells with HEC errors are passed */ - - unsigned int discardParErr:1;/**< [22] Discard cells containing parity errors. - @li 1 - Discard cells with parity errors - @li 0 - Cells with parity errors are passed */ - - unsigned int discardIdle:1; /**< [21] Discard Idle Cells based on DefineIdle register values - @li 1 - Discard IDLE cells - @li 0 - IDLE cells passed */ - - unsigned int enbHecErrCnt:1;/**< [20] Enable Receive HEC Error Count. - @li 1 - Enable count of received cells containing HEC errors - @li 0 - No count is maintained. */ - - unsigned int enbParErrCnt:1;/**< [19] Enable Parity Error Count - @li 1 - Enable count of received cells containing Parity errors - @li 0 - No count is maintained. */ - - unsigned int enbIdleCellCnt:1;/**< [18] Enable Receive Idle Cell Count. - @li 1 - Enable count of Idle cells received. - @li 0 - No count is maintained.*/ - - unsigned int enbSizeErrCnt:1;/**< [17] Enable Receive Size Error Count. - @li 1 - Enable count of received cells of incorrect size - @li 0 - No count is maintained. */ - - unsigned int enbRxCellCnt:1;/**< [16] Enable Receive Valid Cell Count of non-idle/non-error cells. - @li 1 - Enable count of valid cells received - non-idle/non-error - @li 0 - No count is maintained. */ - - unsigned int reserved_1:3; /**< [15:13] These bits are always 0 */ - - unsigned int rxCellOvrInt:1; /**< [12] Enable CBI Utopia Receive Status Condition if the RxCellCount - register overflows. - @li 1 - CBI Receive Status asserted. - @li 0 - No CBI Receive Status asserted.*/ - - unsigned int invalidHecOvrInt:1; /**< [11] Enable CBI Receive Status Condition if the InvalidHecCount - register overflows. - @li 1 - CBI Receive Condition asserted. - @li 0 - No CBI Receive Condition asserted */ - - unsigned int invalidParOvrInt:1; /**< [10] Enable CBI Receive Status Condition if the InvalidParCount - register overflows - @li 1 - CBI Receive Condition asserted. - @li 0 - No CBI Receive Condition asserted */ - - unsigned int invalidSizeOvrInt:1; /**< [9] Enable CBI Receive Status Condition if the InvalidSizeCount - register overflows. - @li 1 - CBI Receive Status Condition asserted. - @li 0 - No CBI Receive Status asserted */ - - unsigned int rxIdleOvrInt:1; /**< [8] Enable CBI Receive Status Condition if the RxIdleCount overflows. - @li 1 - CBI Receive Condition asserted. - @li 0 - No CBI Receive Condition asserted */ - - unsigned int reserved_2:3; /**< [7:5] These bits are always 0 */ - - unsigned int rxAddrMask:5; /**< [4:0] This register is used as a mask to allow the user to increase - the PHY receive address range. The register should be programmed with - the address-range limit, i.e. if set to 0x3 the address range increases - to a maximum of 4 addresses. */ - } utRxEnableFields; /**< Rx enable Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxTransTable0_ - * @brief Utopia Rx translation table Register - */ - struct UtRxTransTable0_ - { - - unsigned int phy0:5; /**< [31-27] Rx Mapping value of logical phy 0 */ - - unsigned int phy1:5; /**< [26-22] Rx Mapping value of logical phy 1 */ - - unsigned int phy2:5; /**< [21-17] Rx Mapping value of logical phy 2 */ - - unsigned int reserved_1:1; /**< [16] These bits are always 0 */ - - unsigned int phy3:5; /**< [15-11] Rx Mapping value of logical phy 3 */ - - unsigned int phy4:5; /**< [10-6] Rx Mapping value of logical phy 4 */ - - unsigned int phy5:5; /**< [5-1] Rx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } - - utRxTransTable0; /**< Rx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxTransTable1_ - * @brief Utopia Rx translation table Register - */ - struct UtRxTransTable1_ - { - - unsigned int phy6:5; /**< [31-27] Rx Mapping value of logical phy 6 */ - - unsigned int phy7:5; /**< [26-22] Rx Mapping value of logical phy 7 */ - - unsigned int phy8:5; /**< [21-17] Rx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy9:5; /**< [15-11] Rx Mapping value of logical phy 3 */ - - unsigned int phy10:5; /**< [10-6] Rx Mapping value of logical phy 4 */ - - unsigned int phy11:5; /**< [5-1] Rx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } - - utRxTransTable1; /**< Rx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxTransTable2_ - * @brief Utopia Rx translation table Register - */ - struct UtRxTransTable2_ - { - - unsigned int phy12:5; /**< [31-27] Rx Mapping value of logical phy 6 */ - - unsigned int phy13:5; /**< [26-22] Rx Mapping value of logical phy 7 */ - - unsigned int phy14:5; /**< [21-17] Rx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy15:5; /**< [15-11] Rx Mapping value of logical phy 3 */ - - unsigned int phy16:5; /**< [10-6] Rx Mapping value of logical phy 4 */ - - unsigned int phy17:5; /**< [5-1] Rx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utRxTransTable2; /**< Rx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxTransTable3_ - * @brief Utopia Rx translation table Register - */ - struct UtRxTransTable3_ - { - - unsigned int phy18:5; /**< [31-27] Rx Mapping value of logical phy 6 */ - - unsigned int phy19:5; /**< [26-22] Rx Mapping value of logical phy 7 */ - - unsigned int phy20:5; /**< [21-17] Rx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy21:5; /**< [15-11] Rx Mapping value of logical phy 3 */ - - unsigned int phy22:5; /**< [10-6] Rx Mapping value of logical phy 4 */ - - unsigned int phy23:5; /**< [5-1] Rx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utRxTransTable3; /**< Rx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxTransTable4_ - * @brief Utopia Rx translation table Register - */ - struct UtRxTransTable4_ - { - - unsigned int phy24:5; /**< [31-27] Rx Mapping value of logical phy 6 */ - - unsigned int phy25:5; /**< [26-22] Rx Mapping value of logical phy 7 */ - - unsigned int phy26:5; /**< [21-17] Rx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy27:5; /**< [15-11] Rx Mapping value of logical phy 3 */ - - unsigned int phy28:5; /**< [10-6] Rx Mapping value of logical phy 4 */ - - unsigned int phy29:5; /**< [5-1] Rx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utRxTransTable4; /**< Rx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxTransTable5_ - * @brief Utopia Rx translation table Register - */ - struct UtRxTransTable5_ - { - - unsigned int phy30:5; /**< [31-27] Rx Mapping value of logical phy 6 */ - - unsigned int reserved_1:27; /**< [26-0] These bits are always 0 */ - - } utRxTransTable5; /**< Rx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtSysConfig_ - * @brief NPE setup Register - */ - struct UtSysConfig_ - { - - unsigned int reserved_1:2; /**< [31-30] These bits are always 0 */ - unsigned int txEnbFSM:1; /**< [29] Enables the operation ofthe Utopia Transmit FSM - * @li 1 - FSM enabled - * @li 0 - FSM inactive - */ - unsigned int rxEnbFSM:1; /**< [28] Enables the operation ofthe Utopia Revieve FSM - * @li 1 - FSM enabled - * @li 0 - FSM inactive - */ - unsigned int disablePins:1; /**< [27] Disable Utopia interface I/O pins forcing the signals to an - * inactive state. Note that this bit is set on reset and must be - * de-asserted - * @li 0 - Normal data transfer - * @li 1 - Utopia interface pins are forced inactive - */ - unsigned int tstLoop:1; /**< [26] Test Loop Back Enable. - * @li Note: For loop back to function RxMode and Tx Mode must both be set - * to single PHY mode. - * @li 0 - Loop back - * @li 1 - Normal operating mode - */ - - unsigned int txReset:1; /**< [25] Resets the Utopia Coprocessor transmit module to a known state. - * @li Note: All transmit configuration and status registers will be reset - * to their reset values. - * @li 0 - Normal operating mode - * @li 1 - Reset transmit modules - */ - - unsigned int rxReset:1; /**< [24] Resets the Utopia Coprocessor receive module to a known state. - * @li Note: All receive configuration and status registers will be reset - * to their reset values. - * @li 0 - Normal operating mode - * @li 1 - Reset receive modules - */ - - unsigned int reserved_2:24; /**< [23-0] These bits are always 0 */ - } utSysConfig; /**< NPE debug config */ - -} -IxAtmdAccUtopiaConfig; - -/** -* -* @brief Utopia status -* -* This structure is used to set/get the Utopia status parameters -* @li contains debug cell counters, to be accessed during a read operation -* -* @note - the exact description of all parameters is done in the Utopia reference -* documents. -* -*/ -typedef struct -{ - - unsigned int utTxCellCount; /**< count of cells transmitted */ - - unsigned int utTxIdleCellCount; /**< count of idle cells transmitted */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxCellConditionStatus_ - * @brief Utopia Tx Status Register - */ - struct UtTxCellConditionStatus_ - { - - unsigned int reserved_1:2; /**< [31:30] These bits are always 0 */ - unsigned int txFIFO2Underflow:1; /**< [29] This bit is set if 64-byte - * Transmit FIFO2 indicates a FIFO underflow - * error condition. - */ - unsigned int txFIFO1Underflow:1; /**< [28] This bit is set if - * 64-byte Transmit FIFO1 indicates a FIFO - * underflow error condition. - */ - unsigned int txFIFO2Overflow:1; /**< [27] This bit is set if 64-byte - * Transmit FIFO2 indicates a FIFO overflow - * error condition. - */ - unsigned int txFIFO1Overflow:1; /**< [26] This bit is set if 64-byte - * Transmit FIFO1 indicates a FIFO overflow - * error condition. - */ - unsigned int txIdleCellCountOvr:1; /**< [25] This bit is set if the - * TxIdleCellCount register overflows. - */ - unsigned int txCellCountOvr:1; /**< [24] This bit is set if the - * TxCellCount register overflows - */ - unsigned int reserved_2:24; /**< [23:0] These bits are always 0 */ - } utTxCellConditionStatus; /**< Tx cells condition status */ - - unsigned int utRxCellCount; /**< count of cell received */ - unsigned int utRxIdleCellCount; /**< count of idle cell received */ - unsigned int utRxInvalidHECount; /**< count of invalid cell - * received because of HEC errors - */ - unsigned int utRxInvalidParCount; /**< count of invalid cell received - * because of parity errors - */ - unsigned int utRxInvalidSizeCount; /**< count of invalid cell - * received because of cell - * size errors - */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxCellConditionStatus_ - * @brief Utopia Rx Status Register - */ - struct UtRxCellConditionStatus_ - { - - unsigned int reserved_1:3; /**< [31:29] These bits are always 0.*/ - unsigned int rxCellCountOvr:1; /**< [28] This bit is set if the RxCellCount register overflows. */ - unsigned int invalidHecCountOvr:1; /**< [27] This bit is set if the InvalidHecCount register overflows.*/ - unsigned int invalidParCountOvr:1; /**< [26] This bit is set if the InvalidParCount register overflows.*/ - unsigned int invalidSizeCountOvr:1; /**< [25] This bit is set if the InvalidSizeCount register overflows.*/ - unsigned int rxIdleCountOvr:1; /**< [24] This bit is set if the RxIdleCount register overflows.*/ - unsigned int reserved_2:4; /**< [23:20] These bits are always 0 */ - unsigned int rxFIFO2Underflow:1; /**< [19] This bit is set if 64-byte Receive FIFO2 - * indicates a FIFO underflow error condition. - */ - unsigned int rxFIFO1Underflow:1; /**< [18] This bit is set if 64-byte Receive - * FIFO1 indicates a FIFO underflow error condition - . */ - unsigned int rxFIFO2Overflow:1; /**< [17] This bit is set if 64-byte Receive FIFO2 - * indicates a FIFO overflow error condition. - */ - unsigned int rxFIFO1Overflow:1; /**< [16] This bit is set if 64-byte Receive FIFO1 - * indicates a FIFO overflow error condition. - */ - unsigned int reserved_3:16; /**< [15:0] These bits are always 0. */ - } utRxCellConditionStatus; /**< Rx cells condition status */ - -} IxAtmdAccUtopiaStatus; - -/** - * @} defgroup IxAtmdAccUtopiaCtrlAPI - */ - - /** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccUtopiaConfigSet (const IxAtmdAccUtopiaConfig * - ixAtmdAccUtopiaConfigPtr) - * - * @brief Send the configuration structure to the Utopia interface - * - * This function downloads the @a IxAtmdAccUtopiaConfig structure to - * the Utopia and has the following effects - * @li setup the Utopia interface - * @li initialise the NPE - * @li reset the Utopia cell counters and status registers to known values - * - * This action has to be done once at initialisation. A lock is preventing - * the concurrent use of @a ixAtmdAccUtopiaStatusGet() and - * @A ixAtmdAccUtopiaConfigSet() - * - * @param *ixAtmdAccNPEConfigPtr @ref IxAtmdAccUtopiaConfig [in] - pointer to a structure to download to - * Utopia. This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS successful download - * @return @li IX_FAIL error in the parameters, or configuration is not - * complete or failed - * - * @sa ixAtmdAccUtopiaStatusGet - * - */ -PUBLIC IX_STATUS ixAtmdAccUtopiaConfigSet (const IxAtmdAccUtopiaConfig * - ixAtmdAccUtopiaConfigPtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccUtopiaStatusGet (IxAtmdAccUtopiaStatus * - ixAtmdAccUtopiaStatus) - * - * @brief Get the Utopia interface configuration. - * - * This function reads the Utopia registers and the Cell counts - * and fills the @a IxAtmdAccUtopiaStatus structure - * - * A lock is preventing the concurrent - * use of @a ixAtmdAccUtopiaStatusGet() and @A ixAtmdAccUtopiaConfigSet() - * - * @param ixAtmdAccUtopiaStatus @ref IxAtmdAccUtopiaStatus [out] - pointer to structure to be updated from internal - * hardware counters. This parameter cannot be a NULL pointer. - * - * @return @li IX_SUCCESS successful read - * @return @li IX_FAIL error in the parameters null pointer, or - * configuration read is not complete or failed - * - * @sa ixAtmdAccUtopiaConfigSet - * - */ -PUBLIC IX_STATUS ixAtmdAccUtopiaStatusGet (IxAtmdAccUtopiaStatus * - ixAtmdAccUtopiaStatus); - -/** - * - * @ingroup IxAtmdAcc - * - * @fn ixAtmdAccPortEnable (IxAtmLogicalPort port) - * - * @brief enable a PHY logical port - * - * This function enables the transmission over one port. It should be - * called before accessing any resource from this port and before the - * establishment of a VC. - * - * When a port is enabled, the cell transmission to the Utopia interface - * is started. If there is no traffic already running, idle cells are - * sent over the interface. - * - * This function can be called multiple times. - * - * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * - * @return @li IX_SUCCESS enable is complete - * @return @li IX_ATMDACC_WARNING port already enabled - * @return @li IX_FAIL enable failed, wrong parameter, or cannot - * initialise this port (the port is maybe already in use, - * or there is a hardware issue) - * - * @note - This function needs internal locks and should not be - * called from an interrupt context - * - * @sa ixAtmdAccPortDisable - * - */ -PUBLIC IX_STATUS ixAtmdAccPortEnable (IxAtmLogicalPort port); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccPortDisable (IxAtmLogicalPort port) - * - * @brief disable a PHY logical port - * - * This function disable the transmission over one port. - * - * When a port is disabled, the cell transmission to the Utopia interface - * is stopped. - * - * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * - * @return @li IX_SUCCESS disable is complete - * @return @li IX_ATMDACC_WARNING port already disabled - * @return @li IX_FAIL disable failed, wrong parameter . - * - * @note - This function needs internal locks and should not be called - * from an interrupt context - * - * @note - The response from hardware is done through the txDone mechanism - * to ensure the synchrnisation with tx resources. Therefore, the - * txDone mechanism needs to be serviced to make a PortDisable complete. - * - * @sa ixAtmdAccPortEnable - * @sa ixAtmdAccPortDisableComplete - * @sa ixAtmdAccTxDoneDispatch - * - */ -PUBLIC IX_STATUS ixAtmdAccPortDisable (IxAtmLogicalPort port); - -/** -* -* @ingroup IxAtmdAccCtrlAPI -* -* @fn ixAtmdAccPortDisableComplete (IxAtmLogicalPort port) -* -* @brief disable a PHY logical port -* -* This function indicates if the port disable for a port has completed. This -* function will return true if the port has never been enabled. -* -* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] -* -* @return @li true disable is complete -* @return @li false disable failed, wrong parameter . -* -* @note - This function needs internal locks and should not be called -* from an interrupt context -* -* @sa ixAtmdAccPortEnable -* @sa ixAtmdAccPortDisable -* -*/ -PUBLIC BOOL ixAtmdAccPortDisableComplete (IxAtmLogicalPort port); - -#endif /* IXATMDACCCTRL_H */ - -/** - * @} defgroup IxAtmdAccCtrlAPI - */ - - diff --git a/drivers/net/npe/include/IxAtmm.h b/drivers/net/npe/include/IxAtmm.h deleted file mode 100644 index 805b8c9bd6..0000000000 --- a/drivers/net/npe/include/IxAtmm.h +++ /dev/null @@ -1,771 +0,0 @@ -/** - * @file IxAtmm.h - * - * @date 3-DEC-2001 - * - * @brief Header file for the IXP400 ATM Manager component (IxAtmm) - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - - -/** - * @defgroup IxAtmm IXP400 ATM Manager (IxAtmm) API - * - * @brief IXP400 ATM Manager component Public API - * - * @{ - */ - -#ifndef IXATMM_H -#define IXATMM_H - -/* - * Put the user defined include files required - */ -#include "IxAtmSch.h" -#include "IxOsalTypes.h" - -/* - * #defines and macros used in this file. - */ - -/** - * @def IX_ATMM_RET_ALREADY_INITIALIZED - * - * @brief Component has already been initialized - */ -#define IX_ATMM_RET_ALREADY_INITIALIZED 2 - -/** - * @def IX_ATMM_RET_INVALID_PORT - * - * @brief Specified port does not exist or is out of range */ -#define IX_ATMM_RET_INVALID_PORT 3 - -/** - * @def IX_ATMM_RET_INVALID_VC_DESCRIPTOR - * - * @brief The VC description does not adhere to ATM standards */ -#define IX_ATMM_RET_INVALID_VC_DESCRIPTOR 4 - -/** - * @def IX_ATMM_RET_VC_CONFLICT - * - * @brief The VPI/VCI values supplied are either reserved, or they - * conflict with a previously registered VC on this port */ -#define IX_ATMM_RET_VC_CONFLICT 5 - -/** - * @def IX_ATMM_RET_PORT_CAPACITY_IS_FULL - * - * @brief The virtual connection cannot be established on the port - * because the remaining port capacity is not sufficient to - * support it */ -#define IX_ATMM_RET_PORT_CAPACITY_IS_FULL 6 - -/** - * @def IX_ATMM_RET_NO_SUCH_VC - * - * @brief No registered VC, as described by the supplied VCI/VPI or - * VC identifier values, exists on this port */ -#define IX_ATMM_RET_NO_SUCH_VC 7 - -/** - * @def IX_ATMM_RET_INVALID_VC_ID - * - * @brief The specified VC identifier is out of range. */ -#define IX_ATMM_RET_INVALID_VC_ID 8 - -/** - * @def IX_ATMM_RET_INVALID_PARAM_PTR - * - * @brief A pointer parameter was NULL. */ -#define IX_ATMM_RET_INVALID_PARAM_PTR 9 - -/** - * @def IX_ATMM_UTOPIA_SPHY_ADDR - * - * @brief The phy address when in SPHY mode */ -#define IX_ATMM_UTOPIA_SPHY_ADDR 31 - -/** - * @def IX_ATMM_THREAD_PRI_HIGH - * - * @brief The value of high priority thread */ -#define IX_ATMM_THREAD_PRI_HIGH 90 - -/* - * Typedefs whose scope is limited to this file. - */ - -/** @brief Definition for use in the @ref IxAtmmVc structure. - * Indicates the direction of a VC */ -typedef enum -{ - IX_ATMM_VC_DIRECTION_TX=0, /**< Atmm Vc direction transmit*/ - IX_ATMM_VC_DIRECTION_RX, /**< Atmm Vc direction receive*/ - IX_ATMM_VC_DIRECTION_INVALID /**< Atmm Vc direction invalid*/ -} IxAtmmVcDirection; - -/** @brief Definition for use with @ref IxAtmmVcChangeCallback - * callback. Indicates that the event type represented by the - * callback for this VC. */ -typedef enum -{ - IX_ATMM_VC_CHANGE_EVENT_REGISTER=0, /**< Atmm Vc event register*/ - IX_ATMM_VC_CHANGE_EVENT_DEREGISTER, /**< Atmm Vc event de-register*/ - IX_ATMM_VC_CHANGE_EVENT_INVALID /**< Atmm Vc event invalid*/ -} IxAtmmVcChangeEvent; - -/** @brief Definitions for use with @ref ixAtmmUTOPIAInit interface to - * indicate that UTOPIA loopback should be enabled or disabled - * on initialisation. */ -typedef enum -{ - IX_ATMM_UTOPIA_LOOPBACK_DISABLED=0, /**< Atmm Utopia loopback mode disabled*/ - IX_ATMM_UTOPIA_LOOPBACK_ENABLED, /**< Atmm Utopia loopback mode enabled*/ - IX_ATMM_UTOPIA_LOOPBACK_INVALID /**< Atmm Utopia loopback mode invalid*/ -} IxAtmmUtopiaLoopbackMode; - -/** @brief This structure describes the required attributes of a - * virtual connection. -*/ -typedef struct { - unsigned vpi; /**< VPI value of this virtual connection */ - unsigned vci; /**< VCI value of this virtual connection. */ - IxAtmmVcDirection direction; /**< VC direction */ - - /** Traffic descriptor of this virtual connection. This structure - * is defined by the @ref IxAtmSch component. */ - IxAtmTrafficDescriptor trafficDesc; -} IxAtmmVc; - - -/** @brief Definitions for use with @ref ixAtmmUtopiaInit interface to - * indicate that UTOPIA multi-phy/single-phy mode is used. - */ -typedef enum -{ - IX_ATMM_MPHY_MODE = 0, /**< Atmm phy mode mphy*/ - IX_ATMM_SPHY_MODE, /**< Atmm phy mode sphy*/ - IX_ATMM_PHY_MODE_INVALID /**< Atmm phy mode invalid*/ -} IxAtmmPhyMode; - - -/** @brief Structure contains port-specific information required to - * initialize IxAtmm, and specifically, the IXP400 UTOPIA - * Level-2 device. */ -typedef struct { - unsigned reserved_1:11; /**< [31:21] Should be zero */ - unsigned UtopiaTxPhyAddr:5; /**< [20:16] Address of the - * transmit (Tx) PHY for this - * port on the 5-bit UTOPIA - * Level-2 address bus */ - unsigned reserved_2:11; /**< [15:5] Should be zero */ - unsigned UtopiaRxPhyAddr:5; /**< [4:0] Address of the receive - * (Rx) PHY for this port on the - * 5-bit UTOPIA Level-2 - * address bus */ -} IxAtmmPortCfg; - -/** @brief Callback type used with @ref ixAtmmVcChangeCallbackRegister interface - * Defines a callback type which will be used to notify registered - * users of registration/deregistration events on a particular port - * - * @param eventType @ref IxAtmmVcChangeEvent [in] - Event indicating - * whether the VC supplied has been added or - * removed - * - * @param port @ref IxAtmLogicalPort [in] - Specifies the port on which the event has - * occurred - * - * @param vcChanged @ref IxAtmmVc* [in] - Pointer to a structure which gives - * details of the VC which has been added - * or removed on the port - */ -typedef void (*IxAtmmVcChangeCallback) (IxAtmmVcChangeEvent eventType, - IxAtmLogicalPort port, - const IxAtmmVc* vcChanged); - -/* - * Variable declarations global to this file only. Externs are followed by - * static variables. - */ - -/* - * Extern function prototypes - */ - -/* - * Function declarations - */ - - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmInit (void) - * - * @brief Interface to initialize the IxAtmm software component. Can - * be called once only. - * - * Must be called before any other IxAtmm API is called. - * - * @param "none" - * - * @return @li IX_SUCCESS : IxAtmm has been successfully initialized. - * Calls to other IxAtmm interfaces may now be performed. - * @return @li IX_FAIL : IxAtmm has already been initialized. - */ -PUBLIC IX_STATUS -ixAtmmInit (void); - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmUtopiaInit (unsigned numPorts, - IxAtmmPhyMode phyMode, - IxAtmmPortCfg portCfgs[], - IxAtmmUtopiaLoopbackMode loopbackMode) - * - * @brief Interface to initialize the UTOPIA Level-2 ATM coprocessor - * for the specified number of physical ports. The function - * must be called before the ixAtmmPortInitialize interface - * can operate successfully. - * - * @param numPorts unsigned [in] - Indicates the total number of logical - * ports that are active on the device. Up to 12 ports are - * supported. - * - * @param phyMode @ref IxAtmmPhyMode [in] - Put the Utopia coprocessor in SPHY - * or MPHY mode. - * - * @param portCfgs[] @ref IxAtmmPortCfg [in] - Pointer to an array of elements - * detailing the UTOPIA specific port characteristics. The - * length of the array must be equal to the number of ports - * activated. ATM ports are referred to by the relevant - * offset in this array in all subsequent IxAtmm interface - * calls. - * - * @param loopbackMode @ref IxAtmmUtopiaLoopbackMode [in] - Value must be one of - * @ref IX_ATMM_UTOPIA_LOOPBACK_ENABLED or @ref - * IX_ATMM_UTOPIA_LOOPBACK_DISABLED indicating whether - * loopback should be enabled on the device. Loopback can - * only be supported on a single PHY, therefore the numPorts - * parameter must be 1 if loopback is enabled. - * - * @return @li IX_SUCCESS : Indicates that the UTOPIA device has been - * successfully initialized for the supplied ports. - * @return @li IX_ATMM_RET_ALREADY_INITIALIZED : The UTOPIA device has - * already been initialized. - * @return @li IX_FAIL : The supplied parameters are invalid or have been - * rejected by the UTOPIA-NPE device. - * - * @warning - * This interface may only be called once. - * Port identifiers are assumed to range from 0 to (numPorts - 1) in all - * instances. - * In all subsequent calls to interfaces supplied by IxAtmm, the specified - * port value is expected to represent the offset in the portCfgs array - * specified in this interface. i.e. The first port in this array will - * subsequently be represented as port 0, the second port as port 1, - * and so on.*/ -PUBLIC IX_STATUS -ixAtmmUtopiaInit (unsigned numPorts, - IxAtmmPhyMode phyMode, - IxAtmmPortCfg portCfgs[], - IxAtmmUtopiaLoopbackMode loopbackMode); - - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmPortInitialize (IxAtmLogicalPort port, - unsigned txPortRate, - unsigned rxPortRate) - * - * @brief The interface is called following @ref ixAtmmUtopiaInit () - * and before calls to any other IxAtmm interface. It serves - * to activate the registered ATM port with IxAtmm. - * - * The transmit and receive port rates are specified in bits per - * second. This translates to ATM cells per second according to the - * following formula: CellsPerSecond = portRate / (53*8) The - * IXP400 device supports only 53 byte cells. The client shall make - * sure that the off-chip physical layer device has already been - * initialized. - * - * IxAtmm will configure IxAtmdAcc and IxAtmSch to enable scheduling - * on the port. - * - * This interface must be called once for each active port in the - * system. The first time the interface is invoked, it will configure - * the mechanism by which the handling of transmit, transmit-done and - * receive are driven with the IxAtmdAcc component. - * - * This function is reentrant. - * - * @note The minimum tx rate that will be accepted is 424 bit/s which equates - * to 1 cell (53 bytes) per second. - * - * @param port @ref IxAtmLogicalPort [in] - Identifies the port which is to be - * initialized. - * - * @param txPortRate unsigned [in] - Value specifies the - * transmit port rate for this port in - * bits/second. This value is used by the ATM Scheduler - * component is evaluating VC access requests for the port. - * - * @param rxPortRate unsigned [in] - Value specifies the - * receive port rate for this port in bits/second. - * - * @return @li IX_SUCCESS : The specificed ATM port has been successfully - * initialized. IxAtmm is ready to accept VC registrations on - * this port. - * - * @return @li IX_ATMM_RET_ALREADY_INITIALIZED : ixAtmmPortInitialize has - * already been called successfully on this port. The current - * call is rejected. - * - * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the - * input is not valid. The request is rejected. - * - * @return @li IX_FAIL : IxAtmm could not initialize the port because the - * inputs are not understood. - * - * @sa ixAtmmPortEnable, ixAtmmPortDisable - * - */ -PUBLIC IX_STATUS -ixAtmmPortInitialize (IxAtmLogicalPort port, - unsigned txPortRate, - unsigned rxPortRate); - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmPortModify (IxAtmLogicalPort port, - unsigned txPortRate, - unsigned rxPortRate) - * - * @brief A client may call this interface to change the existing - * port rate (expressed in bits/second) on an established ATM - * port. - * - * @param port @ref IxAtmLogicalPort [in] - Identifies the port which is to be - * initialized. - * - * @param txPortRate unsigned [in] - Value specifies the`` - * transmit port rate for this port in - * bits/second. This value is used by the ATM Scheduler - * component is evaluating VC access requests for the port. - * - * @param rxPortRate unsigned [in] - Value specifies the - * receive port rate for this port in - * bits/second. - * - * @return @li IX_SUCCESS : The indicated ATM port rates have been - * successfully modified. - * - * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the - * input is not valid. The request is rejected. - * - * @return @li IX_FAIL : IxAtmm could not update the port because the - * inputs are not understood, or the interface was called before - * the port was initialized. */ -PUBLIC IX_STATUS -ixAtmmPortModify (IxAtmLogicalPort port, - unsigned txPortRate, - unsigned rxPortRate); - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmPortQuery (IxAtmLogicalPort port, - unsigned *txPortRate, - unsigned *rxPortRate); - - * - * @brief The client may call this interface to request details on - * currently registered transmit and receive rates for an ATM - * port. - * - * @param port @ref IxAtmLogicalPort [in] - Value identifies the port from which the - * rate details are requested. - * - * @param *txPortRate unsigned [out] - Pointer to a value - * which will be filled with the value of the transmit port - * rate specified in bits/second. - * - * @param *rxPortRate unsigned [out] - Pointer to a value - * which will be filled with the value of the receive port - * rate specified in bits/second. - * - * @return @li IX_SUCCESS : The information requested on the specified - * port has been successfully supplied in the output. - * - * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the - * input is not valid. The request is rejected. - * - * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was - * NULL. - * - * @return @li IX_FAIL : IxAtmm could not update the port because the - * inputs are not understood, or the interface was called before - * the port was initialized. */ -PUBLIC IX_STATUS -ixAtmmPortQuery (IxAtmLogicalPort port, - unsigned *txPortRate, - unsigned *rxPortRate); - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmPortEnable(IxAtmLogicalPort port) - * - * @brief The client call this interface to enable transmit for an ATM - * port. At initialisation, all the ports are disabled. - * - * @param port @ref IxAtmLogicalPort [in] - Value identifies the port - * - * @return @li IX_SUCCESS : Transmission over this port is started. - * - * @return @li IX_FAIL : The port parameter is not valid, or the - * port is already enabled - * - * @note - When a port is disabled, Rx and Tx VC Connect requests will fail - * - * @note - This function uses system resources and should not be used - * inside an interrupt context. - * - * @sa ixAtmmPortDisable */ -PUBLIC IX_STATUS -ixAtmmPortEnable(IxAtmLogicalPort port); - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmPortDisable(IxAtmLogicalPort port) - * - * @brief The client call this interface to disable transmit for an ATM - * port. At initialisation, all the ports are disabled. - * - * @param port @ref IxAtmLogicalPort [in] - Value identifies the port - * - * @return @li IX_SUCCESS : Transmission over this port is stopped. - * - * @return @li IX_FAIL : The port parameter is not valid, or the - * port is already disabled - * - * @note - When a port is disabled, Rx and Tx VC Connect requests will fail - * - * @note - This function call does not stop RX traffic. It is supposed - * that this function is invoked when a serious problem - * is detected (e.g. physical layer broken). Then, the RX traffic - * is not passing. - * - * @note - This function is blocking until the hw acknowledge that the - * transmission is stopped. - * - * @note - This function uses system resources and should not be used - * inside an interrupt context. - * - * @sa ixAtmmPortEnable */ -PUBLIC IX_STATUS -ixAtmmPortDisable(IxAtmLogicalPort port); - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmVcRegister (IxAtmLogicalPort port, - IxAtmmVc *vcToAdd, - IxAtmSchedulerVcId *vcId) - * - * @brief This interface is used to register an ATM Virtual - * Connection on the specified ATM port. - * - * Each call to this interface registers a unidirectional virtual - * connection with the parameters specified. If a bi-directional VC - * is needed, the function should be called twice (once for each - * direction, Tx & Rx) where the VPI and VCI and port parameters in - * each call are identical. - * - * With the addition of each new VC to a port, a series of - * callback functions are invoked by the IxAtmm component to notify - * possible external components of the change. The callback functions - * are registered using the @ref ixAtmmVcChangeCallbackRegister interface. - * - * The IxAtmSch component is notified of the registration of transmit - * VCs. - * - * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the specified VC is - * to be registered. - * - * @param *vcToAdd @ref IxAtmmVc [in] - Pointer to an @ref IxAtmmVc structure - * containing a description of the VC to be registered. The - * client shall fill the vpi, vci and direction and relevant - * trafficDesc members of this structure before calling this - * function. - * - * @param *vcId @ref IxAtmSchedulerVcId [out] - Pointer to an integer value which is filled - * with the per-port unique identifier value for this VC. - * This identifier will be required when a request is - * made to deregister or change this VC. VC identifiers - * for transmit VCs will have a value between 0-43, - * i.e. 32 data Tx VCs + 12 OAM Tx Port VCs. - * Receive VCs will have a value between 44-66, - * i.e. 32 data Rx VCs + 1 OAM Rx VC. - * - * @return @li IX_SUCCESS : The VC has been successfully registered on - * this port. The VC is ready for a client to configure IxAtmdAcc - * for receive and transmit operations on the VC. - * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the - * input is not valid or has not been initialized. The request - * is rejected. - * @return @li IX_ATMM_RET_INVALID_VC_DESCRIPTOR : The descriptor - * pointed to by vcToAdd is invalid. The registration request - * is rejected. - * @return @li IX_ATMM_RET_VC_CONFLICT : The VC requested conflicts with - * reserved VPI and/or VCI values or with another VC already activated - * on this port. - * @return @li IX_ATMM_RET_PORT_CAPACITY_IS_FULL : The VC cannot be - * registered in the port becuase the port capacity is - * insufficient to support the requested ATM traffic contract. - * The registration request is rejected. - * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was - * NULL. - * - * @warning IxAtmm has no capability of signaling or negotiating a virtual - * connection. Negotiation of the admission of the VC to the network - * is beyond the scope of this function. This is assumed to be - * performed by the calling client, if appropriate, - * before or after this function is called. - */ -PUBLIC IX_STATUS -ixAtmmVcRegister (IxAtmLogicalPort port, - IxAtmmVc *vcToAdd, - IxAtmSchedulerVcId *vcId); - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmVcDeregister (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId) - * - * @brief Function called by a client to deregister a VC from the - * system. - * - * With the removal of each new VC from a port, a series of - * registered callback functions are invoked by the IxAtmm component - * to notify possible external components of the change. The callback - * functions are registered using the @ref ixAtmmVcChangeCallbackRegister. - * - * The IxAtmSch component is notified of the removal of transmit VCs. - * - * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be - * removed is currently registered. - * - * @param vcId @ref IxAtmSchedulerVcId [in] - VC identifier value of the VC to - * be deregistered. This value was supplied to the client when - the VC was originally registered. This value can also be - queried from the IxAtmm component through the @ref ixAtmmVcQuery - * interface. - * - * @return @li IX_SUCCESS : The specified VC has been successfully - * removed from this port. - * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the - * input is not valid or has not been initialized. The request - * is rejected. - * @return @li IX_FAIL : There is no registered VC associated with the - * supplied identifier registered on this port. */ -PUBLIC IX_STATUS -ixAtmmVcDeregister (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId); - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmVcQuery (IxAtmLogicalPort port, - unsigned vpi, - unsigned vci, - IxAtmmVcDirection direction, - IxAtmSchedulerVcId *vcId, - IxAtmmVc *vcDesc) - * - * @brief This interface supplies information about an active VC on a - * particular port when supplied with the VPI, VCI and - * direction of that VC. - * - * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be - * queried is currently registered. - * - * @param vpi unsigned [in] - ATM VPI value of the requested VC. - * - * @param vci unsigned [in] - ATM VCI value of the requested VC. - * - * @param direction @ref IxAtmmVcDirection [in] - One of @ref - * IX_ATMM_VC_DIRECTION_TX or @ref IX_ATMM_VC_DIRECTION_RX - * indicating the direction (Tx or Rx) of the requested VC. - * - * @param *vcId @ref IxAtmSchedulerVcId [out] - Pointer to an integer value which will be - * filled with the VC identifier value for the requested - * VC (as returned by @ref ixAtmmVcRegister), if it - * exists on this port. - * - * @param *vcDesc @ref IxAtmmVc [out] - Pointer to an @ref IxAtmmVc structure - * which will be filled with the specific details of the - * requested VC, if it exists on this port. - * - * @return @li IX_SUCCESS : The specified VC has been found on this port - * and the requested details have been returned. - * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the - * input is not valid or has not been initialized. The request - * is rejected. - * @return @li IX_ATMM_RET_NO_SUCH_VC : No VC exists on the specified - * port which matches the search criteria (VPI, VCI, direction) - * given. No data is returned. - * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was - * NULL. - * - */ -PUBLIC IX_STATUS -ixAtmmVcQuery (IxAtmLogicalPort port, - unsigned vpi, - unsigned vci, - IxAtmmVcDirection direction, - IxAtmSchedulerVcId *vcId, - IxAtmmVc *vcDesc); - - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmVcIdQuery (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId, IxAtmmVc *vcDesc) - * - * @brief This interface supplies information about an active VC on a - * particular port when supplied with a vcId for that VC. - * - * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be - * queried is currently registered. - * - * @param vcId @ref IxAtmSchedulerVcId [in] - Value returned by @ref ixAtmmVcRegister which - * uniquely identifies the requested VC on this port. - * - * @param *vcDesc @ref IxAtmmVc [out] - Pointer to an @ref IxAtmmVc structure - * which will be filled with the specific details of the - * requested VC, if it exists on this port. - * - * @return @li IX_SUCCESS : The specified VC has been found on this port - * and the requested details have been returned. - * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the - * input is not valid or has not been initialized. The request - * is rejected. - * @return @li IX_ATMM_RET_NO_SUCH_VC : No VC exists on the specified - * port which matches the supplied identifier. No data is - * returned. - * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was - * NULL. - */ -PUBLIC IX_STATUS -ixAtmmVcIdQuery (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId, IxAtmmVc *vcDesc); - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmVcChangeCallbackRegister (IxAtmmVcChangeCallback callback) - * - * @brief This interface is invoked to supply a function to IxAtmm - * which will be called to notify the client if a new VC is - * registered with IxAtmm or an existing VC is removed. - * - * The callback, when invoked, will run within the context of the call - * to @ref ixAtmmVcRegister or @ref ixAtmmVcDeregister which caused - * the change of state. - * - * A maximum of 32 calbacks may be registered in with IxAtmm. - * - * @param callback @ref IxAtmmVcChangeCallback [in] - Callback which complies - * with the @ref IxAtmmVcChangeCallback definition. This - * function will be invoked by IxAtmm with the appropiate - * parameters for the relevant VC when any VC has been - * registered or deregistered with IxAtmm. - * - * @return @li IX_SUCCESS : The specified callback has been registered - * successfully with IxAtmm and will be invoked when appropriate. - * @return @li IX_FAIL : Either the supplied callback is invalid, or - * IxAtmm has already registered 32 and connot accommodate - * any further registrations of this type. The request is - * rejected. - * - * @warning The client must not call either the @ref - * ixAtmmVcRegister or @ref ixAtmmVcDeregister interfaces - * from within the supplied callback function. */ -PUBLIC IX_STATUS ixAtmmVcChangeCallbackRegister (IxAtmmVcChangeCallback callback); - - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmVcChangeCallbackDeregister (IxAtmmVcChangeCallback callback) - * - * @brief This interface is invoked to deregister a previously supplied - * callback function. - * - * @param callback @ref IxAtmmVcChangeCallback [in] - Callback which complies - * with the @ref IxAtmmVcChangeCallback definition. This - * function will removed from the table of callbacks. - * - * @return @li IX_SUCCESS : The specified callback has been deregistered - * successfully from IxAtmm. - * @return @li IX_FAIL : Either the supplied callback is invalid, or - * is not currently registered with IxAtmm. - */ -PUBLIC IX_STATUS -ixAtmmVcChangeCallbackDeregister (IxAtmmVcChangeCallback callback); - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmUtopiaStatusShow (void) - * - * @brief Display utopia status counters - * - * @param "none" - * - * @return @li IX_SUCCESS : Show function was successful - * @return @li IX_FAIL : Internal failure - */ -PUBLIC IX_STATUS -ixAtmmUtopiaStatusShow (void); - -/** - * @ingroup IxAtmm - * - * @fn ixAtmmUtopiaCfgShow (void) - * - * @brief Display utopia information(config registers and status registers) - * - * @param "none" - * - * @return @li IX_SUCCESS : Show function was successful - * @return @li IX_FAIL : Internal failure - */ -PUBLIC IX_STATUS -ixAtmmUtopiaCfgShow (void); - -#endif -/* IXATMM_H */ - -/** @} */ diff --git a/drivers/net/npe/include/IxDmaAcc.h b/drivers/net/npe/include/IxDmaAcc.h deleted file mode 100644 index a62e72cc1b..0000000000 --- a/drivers/net/npe/include/IxDmaAcc.h +++ /dev/null @@ -1,236 +0,0 @@ -/** - * @file IxDmaAcc.h - * - * @date 15 October 2002 - * - * @brief API of the IXP400 DMA Access Driver Component (IxDma) - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/*--------------------------------------------------------------------- - Doxygen group definitions - ---------------------------------------------------------------------*/ - -#ifndef IXDMAACC_H -#define IXDMAACC_H - -#include "IxOsal.h" -#include "IxNpeDl.h" -/** - * @defgroup IxDmaTypes IXP400 DMA Types (IxDmaTypes) - * @brief The common set of types used in the DMA component - * @{ - */ - -/** - * @ingroup IxDmaTypes - * @enum IxDmaReturnStatus - * @brief Dma return status definitions - */ -typedef enum -{ - IX_DMA_SUCCESS = IX_SUCCESS, /**< DMA Transfer Success */ - IX_DMA_FAIL = IX_FAIL, /**< DMA Transfer Fail */ - IX_DMA_INVALID_TRANSFER_WIDTH, /**< Invalid transfer width */ - IX_DMA_INVALID_TRANSFER_LENGTH, /**< Invalid transfer length */ - IX_DMA_INVALID_TRANSFER_MODE, /**< Invalid transfer mode */ - IX_DMA_INVALID_ADDRESS_MODE, /**< Invalid address mode */ - IX_DMA_REQUEST_FIFO_FULL /**< DMA request queue is full */ -} IxDmaReturnStatus; - -/** - * @ingroup IxDmaTypes - * @enum IxDmaTransferMode - * @brief Dma transfer mode definitions - * @note Copy and byte swap, and copy and reverse modes only support multiples of word data length. - */ -typedef enum -{ - IX_DMA_COPY_CLEAR = 0, /**< copy and clear source*/ - IX_DMA_COPY, /**< copy */ - IX_DMA_COPY_BYTE_SWAP, /**< copy and byte swap (endian) */ - IX_DMA_COPY_REVERSE, /**< copy and reverse */ - IX_DMA_TRANSFER_MODE_INVALID /**< Invalid transfer mode */ -} IxDmaTransferMode; - -/** - * @ingroup IxDmaTypes - * @enum IxDmaAddressingMode - * @brief Dma addressing mode definitions - * @note Fixed source address to fixed destination address addressing mode is not supported. - */ -typedef enum -{ - IX_DMA_INC_SRC_INC_DST = 0, /**< Incremental source address to incremental destination address */ - IX_DMA_INC_SRC_FIX_DST, /**< Incremental source address to incremental destination address */ - IX_DMA_FIX_SRC_INC_DST, /**< Incremental source address to incremental destination address */ - IX_DMA_FIX_SRC_FIX_DST, /**< Incremental source address to incremental destination address */ - IX_DMA_ADDRESSING_MODE_INVALID /**< Invalid Addressing Mode */ -} IxDmaAddressingMode; - -/** - * @ingroup IxDmaTypes - * @enum IxDmaTransferWidth - * @brief Dma transfer width definitions - * @Note Fixed addresses (either source or destination) do not support burst transfer width. - */ -typedef enum -{ - IX_DMA_32_SRC_32_DST = 0, /**< 32-bit src to 32-bit dst */ - IX_DMA_32_SRC_16_DST, /**< 32-bit src to 16-bit dst */ - IX_DMA_32_SRC_8_DST, /**< 32-bit src to 8-bit dst */ - IX_DMA_16_SRC_32_DST, /**< 16-bit src to 32-bit dst */ - IX_DMA_16_SRC_16_DST, /**< 16-bit src to 16-bit dst */ - IX_DMA_16_SRC_8_DST, /**< 16-bit src to 8-bit dst */ - IX_DMA_8_SRC_32_DST, /**< 8-bit src to 32-bit dst */ - IX_DMA_8_SRC_16_DST, /**< 8-bit src to 16-bit dst */ - IX_DMA_8_SRC_8_DST, /**< 8-bit src to 8-bit dst */ - IX_DMA_8_SRC_BURST_DST, /**< 8-bit src to burst dst - Not supported for fixed destination address */ - IX_DMA_16_SRC_BURST_DST, /**< 16-bit src to burst dst - Not supported for fixed destination address */ - IX_DMA_32_SRC_BURST_DST, /**< 32-bit src to burst dst - Not supported for fixed destination address */ - IX_DMA_BURST_SRC_8_DST, /**< burst src to 8-bit dst - Not supported for fixed source address */ - IX_DMA_BURST_SRC_16_DST, /**< burst src to 16-bit dst - Not supported for fixed source address */ - IX_DMA_BURST_SRC_32_DST, /**< burst src to 32-bit dst - Not supported for fixed source address*/ - IX_DMA_BURST_SRC_BURST_DST, /**< burst src to burst dst - Not supported for fixed source and destination address -*/ - IX_DMA_TRANSFER_WIDTH_INVALID /**< Invalid transfer width */ -} IxDmaTransferWidth; - -/** - * @ingroup IxDmaTypes - * @enum IxDmaNpeId - * @brief NpeId numbers to identify NPE A, B or C - */ -typedef enum -{ - IX_DMA_NPEID_NPEA = 0, /**< Identifies NPE A */ - IX_DMA_NPEID_NPEB, /**< Identifies NPE B */ - IX_DMA_NPEID_NPEC, /**< Identifies NPE C */ - IX_DMA_NPEID_MAX /**< Total Number of NPEs */ -} IxDmaNpeId; -/* @} */ -/** - * @defgroup IxDmaAcc IXP400 DMA Access Driver (IxDmaAcc) API - * - * @brief The public API for the IXP400 IxDmaAcc component - * - * @{ - */ - -/** - * @ingroup IxDmaAcc - * @brief DMA Request Id type - */ -typedef UINT32 IxDmaAccRequestId; - -/** - * @ingroup IxDmaAcc - * @def IX_DMA_REQUEST_FULL - * @brief DMA request queue is full - * This constant is a return value used to tell the user that the IxDmaAcc - * queue is full. - * - */ -#define IX_DMA_REQUEST_FULL 16 - -/** - * @ingroup IxDmaAcc - * @brief DMA completion notification - * This function is called to notify a client that the DMA has been completed - * @param status @ref IxDmaReturnStatus [out] - reporting to client - * - */ -typedef void (*IxDmaAccDmaCompleteCallback) (IxDmaReturnStatus status); - -/** - * @ingroup IxDmaAcc - * - * @fn ixDmaAccInit(IxNpeDlNpeId npeId) - * - * @brief Initialise the DMA Access component - * This function will initialise the DMA Access component internals - * @param npeId @ref IxNpeDlNpeId [in] - NPE to use for Dma Transfer - * @return @li IX_SUCCESS succesfully initialised the component - * @return @li IX_FAIL Initialisation failed for some unspecified - * internal reason. - */ -PUBLIC IX_STATUS -ixDmaAccInit(IxNpeDlNpeId npeId); - -/** - * @ingroup IxDmaAcc - * - * @fn ixDmaAccDmaTransfer( - IxDmaAccDmaCompleteCallback callback, - UINT32 SourceAddr, - UINT32 DestinationAddr, - UINT16 TransferLength, - IxDmaTransferMode TransferMode, - IxDmaAddressingMode AddressingMode, - IxDmaTransferWidth TransferWidth) - * - * @brief Perform DMA transfer - * This function will perform DMA transfer between devices within the - * IXP400 memory map. - * @note The following are restrictions for IxDmaAccDmaTransfer: - * @li The function is non re-entrant. - * @li The function assumes host devices are operating in big-endian mode. - * @li Fixed address does not suport burst transfer width - * @li Fixed source address to fixed destinatiom address mode is not suported - * @li The incrementing source address for expansion bus will not support a burst transfer width and copy and clear mode - * - * @param callback @ref IxDmaAccDmaCompleteCallback [in] - function pointer to be stored and called when the DMA transfer is completed. This cannot be NULL. - * @param SourceAddr UINT32 [in] - Starting address of DMA source. Must be a valid IXP400 memory map address. - * @param DestinationAddr UINT32 [in] - Starting address of DMA destination. Must be a valid IXP400 memory map address. - * @param TransferLength UINT16 [in] - The size of DMA data transfer. The range must be from 1-64Kbyte - * @param TransferMode @ref IxDmaTransferMode [in] - The DMA transfer mode - * @param AddressingMode @ref IxDmaAddressingMode [in] - The DMA addressing mode - * @param TransferWidth @ref IxDmaTransferWidth [in] - The DMA transfer width - * - * @return @li IX_DMA_SUCCESS Notification that the DMA request is succesful - * @return @li IX_DMA_FAIL IxDmaAcc not yet initialised or some internal error has occured - * @return @li IX_DMA_INVALID_TRANSFER_WIDTH Transfer width is nit valid - * @return @li IX_DMA_INVALID_TRANSFER_LENGTH Transfer length outside of valid range - * @return @li IX_DMA_INVALID_TRANSFER_MODE Transfer Mode not valid - * @return @li IX_DMA_REQUEST_FIFO_FULL IxDmaAcc request queue is full - */ -PUBLIC IxDmaReturnStatus -ixDmaAccDmaTransfer( - IxDmaAccDmaCompleteCallback callback, - UINT32 SourceAddr, - UINT32 DestinationAddr, - UINT16 TransferLength, - IxDmaTransferMode TransferMode, - IxDmaAddressingMode AddressingMode, - IxDmaTransferWidth TransferWidth); -/** - * @ingroup IxDmaAcc - * - * @fn ixDmaAccShow(void) - * - * @brief Display some component information for debug purposes - * Show some internal operation information relating to the DMA service. - * At a minimum the following will show. - * - the number of the DMA pend (in queue) - * @param None - * @return @li None - */ -PUBLIC IX_STATUS -ixDmaAccShow(void); - -#endif /* IXDMAACC_H */ - diff --git a/drivers/net/npe/include/IxEthAcc.h b/drivers/net/npe/include/IxEthAcc.h deleted file mode 100644 index cc7e010667..0000000000 --- a/drivers/net/npe/include/IxEthAcc.h +++ /dev/null @@ -1,2488 +0,0 @@ -/** @file IxEthAcc.h - * - * @brief this file contains the public API of @ref IxEthAcc component - * - * Design notes: - * The IX_OSAL_MBUF address is to be specified on bits [31-5] and must - * be cache aligned (bits[4-0] cleared) - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - * - */ - -#ifndef IxEthAcc_H -#define IxEthAcc_H - -#include -#include - -/** - * @defgroup IxEthAcc IXP400 Ethernet Access (IxEthAcc) API - * - * @brief ethAcc is a library that does provides access to the internal IXP400 10/100Bt Ethernet MACs. - * - *@{ - */ - -/** - * @ingroup IxEthAcc - * @brief Definition of the Ethernet Access status - */ -typedef enum /* IxEthAccStatus */ -{ - IX_ETH_ACC_SUCCESS = IX_SUCCESS, /**< return success*/ - IX_ETH_ACC_FAIL = IX_FAIL, /**< return fail*/ - IX_ETH_ACC_INVALID_PORT, /**< return invalid port*/ - IX_ETH_ACC_PORT_UNINITIALIZED, /**< return uninitialized*/ - IX_ETH_ACC_MAC_UNINITIALIZED, /**< return MAC uninitialized*/ - IX_ETH_ACC_INVALID_ARG, /**< return invalid arg*/ - IX_ETH_TX_Q_FULL, /**< return tx queue is full*/ - IX_ETH_ACC_NO_SUCH_ADDR /**< return no such address*/ -} IxEthAccStatus; - -/** - * @ingroup IxEthAcc - * @enum IxEthAccPortId - * @brief Definition of the IXP400 Mac Ethernet device. - */ -typedef enum -{ - IX_ETH_PORT_1 = 0, /**< Ethernet Port 1 */ - IX_ETH_PORT_2 = 1 /**< Ethernet port 2 */ - ,IX_ETH_PORT_3 = 2 /**< Ethernet port 3 */ -} IxEthAccPortId; - -/** - * @ingroup IxEthAcc - * - * @def IX_ETH_ACC_NUMBER_OF_PORTS - * - * @brief Definition of the number of ports - * - */ -#ifdef __ixp46X -#define IX_ETH_ACC_NUMBER_OF_PORTS (3) -#else -#define IX_ETH_ACC_NUMBER_OF_PORTS (2) -#endif - -/** - * @ingroup IxEthAcc - * - * @def IX_IEEE803_MAC_ADDRESS_SIZE - * - * @brief Definition of the size of the MAC address - * - */ -#define IX_IEEE803_MAC_ADDRESS_SIZE (6) - - -/** - * - * @brief Definition of the IEEE 802.3 Ethernet MAC address structure. - * - * The data should be packed with bytes xx:xx:xx:xx:xx:xx - * @note - * The data must be packed in network byte order. - */ -typedef struct -{ - UINT8 macAddress[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< MAC address */ -} IxEthAccMacAddr; - -/** - * @ingroup IxEthAcc - * @def IX_ETH_ACC_NUM_TX_PRIORITIES - * @brief Definition of the number of transmit priorities - * - */ -#define IX_ETH_ACC_NUM_TX_PRIORITIES (8) - -/** - * @ingroup IxEthAcc - * @enum IxEthAccTxPriority - * @brief Definition of the relative priority used to transmit a frame - * - */ -typedef enum -{ - IX_ETH_ACC_TX_PRIORITY_0 = 0, /** STA */ - IX_ETHACC_RX_APTYPE = 0x30 /**< 802.11, AP <=> AP */ -} IxEthAccRxFrameType; - -/** - * @ingroup IxEthAcc - * @enum IxEthAccDuplexMode - * @brief Definition to provision the duplex mode of the MAC. - * - */ -typedef enum -{ - IX_ETH_ACC_FULL_DUPLEX, /**< Full duplex operation of the MAC */ - IX_ETH_ACC_HALF_DUPLEX /**< Half duplex operation of the MAC */ -} IxEthAccDuplexMode; - - -/** - * @ingroup IxEthAcc - * @struct IxEthAccNe - * @brief Definition of service-specific informations. - * - * This structure defines the Ethernet service-specific informations - * and enable QoS and VLAN features. - */ -typedef struct -{ - UINT32 ixReserved_next; /**< reserved for chaining */ - UINT32 ixReserved_lengths; /**< reserved for buffer lengths */ - UINT32 ixReserved_data; /**< reserved for buffer pointer */ - UINT8 ixDestinationPortId; /**< Destination portId for this packet, if known by NPE */ - UINT8 ixSourcePortId; /**< Source portId for this packet */ - UINT16 ixFlags; /**< BitField of option for this frame */ - UINT8 ixQoS; /**< QoS class of the frame */ - UINT8 ixReserved; /**< reserved */ - UINT16 ixVlanTCI; /**< Vlan TCI */ - UINT8 ixDestMac[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< Destination MAC address */ - UINT8 ixSourceMac[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< Source MAC address */ -} IxEthAccNe; - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_PORT_UNKNOWN - * - * @brief Contents of the field @a IX_ETHACC_NE_DESTPORTID when no - * destination port can be found by the NPE for this frame. - * - */ -#define IX_ETHACC_NE_PORT_UNKNOWN (0xff) - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_DESTMAC - * - * @brief The location of the destination MAC address in the Mbuf header. - * - */ -#define IX_ETHACC_NE_DESTMAC(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixDestMac - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_SOURCEMAC - * - * @brief The location of the source MAC address in the Mbuf header. - * - */ -#define IX_ETHACC_NE_SOURCEMAC(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixSourceMac - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_VLANTCI - * - * @brief The VLAN Tag Control Information associated with this frame - * - * The VLAN Tag Control Information associated with this frame. On Rx - * path, this field is extracted from the packet header. - * On Tx path, the value of this field is inserted in the frame when - * the port is configured to insert or replace vlan tags in the - * egress frames. - * - * @sa IX_ETHACC_NE_FLAGS - */ -#define IX_ETHACC_NE_VLANTCI(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixVlanTCI - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_SOURCEPORTID - * - * @brief The port where this frame came from. - * - * The port where this frame came from. This field is set on receive - * with the port information. This field is ignored on Transmit path. - */ -#define IX_ETHACC_NE_SOURCEPORTID(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixSourcePortId - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_DESTPORTID - * - * @brief The destination port where this frame should be sent. - * - * The destination port where this frame should be sent. - * - * @li In the transmit direction, this field contains the destination port - * and is ignored unless @a IX_ETHACC_NE_FLAG_DST is set. - * - * @li In the receive direction, this field contains the port where the - * destination MAC addresses has been learned. If the destination - * MAC address is unknown, then this value is set to the reserved value - * @a IX_ETHACC_NE_PORT_UNKNOWN - * - */ -#define IX_ETHACC_NE_DESTPORTID(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixDestinationPortId - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_QOS - * - * @brief QualityOfService class (QoS) for this received frame. - * - */ -#define IX_ETHACC_NE_QOS(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixQoS - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_FLAGS - * - * @brief Bit Mask of the different flags associated with a frame - * - * The flags are the bit-oring combination - * of the following different fields : - * - * @li IP flag (Rx @a IX_ETHACC_NE_IPMASK) - * @li Spanning Tree flag (Rx @a IX_ETHACC_NE_STMASK) - * @li Link layer type (Rx and Tx @a IX_ETHACC_NE_LINKMASK) - * @li VLAN Tagged Frame (Rx @a IX_ETHACC_NE_VLANMASK) - * @li New source MAC address (Rx @a IX_ETHACC_NE_NEWSRCMASK) - * @li Multicast flag (Rx @a IX_ETHACC_NE_MCASTMASK) - * @li Broadcast flag (Rx @a IX_ETHACC_NE_BCASTMASK) - * @li Destination port flag (Tx @a IX_ETHACC_NE_PORTMASK) - * @li Tag/Untag Tx frame (Tx @a IX_ETHACC_NE_TAGMODEMASK) - * @li Overwrite destination port (Tx @a IX_ETHACC_NE_PORTOVERMASK) - * @li Filtered frame (Rx @a IX_ETHACC_NE_STMASK) - * @li VLAN Enabled (Rx and Tx @a IX_ETHACC_NE_VLANENABLEMASK) - */ -#define IX_ETHACC_NE_FLAGS(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixFlags - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_BCASTMASK - * - * @brief This mask defines if a received frame is a broadcast frame. - * - * This mask defines if a received frame is a broadcast frame. - * The BCAST flag is set when the destination MAC address of - * a frame is broadcast. - * - * @sa IX_ETHACC_NE_FLAGS - * - */ -#define IX_ETHACC_NE_BCASTMASK (0x1) - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_MCASTMASK - * - * @brief This mask defines if a received frame is a multicast frame. - * - * This mask defines if a received frame is a multicast frame. - * The MCAST flag is set when the destination MAC address of - * a frame is multicast. - * - * @sa IX_ETHACC_NE_FLAGS - * - */ -#define IX_ETHACC_NE_MCASTMASK (0x1 << 1) - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_IPMASK - * - * @brief This mask defines if a received frame is a IP frame. - * - * This mask applies to @a IX_ETHACC_NE_FLAGS and defines if a received - * frame is a IP frame. The IP flag is set on Rx direction, depending on - * the frame contents. The flag is set when the length/type field of a - * received frame is 0x8000. - * - * @sa IX_ETHACC_NE_FLAGS - * - */ -#define IX_ETHACC_NE_IPMASK (0x1 << 2) - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_VLANMASK - * - * @brief This mask defines if a received frame is VLAN tagged. - * - * This mask defines if a received frame is VLAN tagged. - * When set, the Rx frame is VLAN-tagged and the tag value - * is available thru @a IX_ETHACC_NE_VLANID. - * Note that when sending frames which are already tagged - * this flag should be set, to avoid inserting another VLAN tag. - * - * @sa IX_ETHACC_NE_FLAGS - * @sa IX_ETHACC_NE_VLANID - * - */ -#define IX_ETHACC_NE_VLANMASK (0x1 << 3) - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_LINKMASK - * - * @brief This mask is the link layer protocol indicator - * - * This mask applies to @a IX_ETHACC_NE_FLAGS. - * It reflects the state of a frame as it exits an NPE on the Rx path - * or enters an NPE on the Tx path. Its values are as follows: - * @li 0x00 - IEEE802.3 - 8802 (Rx) / IEEE802.3 - 8802 (Tx) - * @li 0x01 - IEEE802.3 - Ethernet (Rx) / IEEE802.3 - Ethernet (Tx) - * @li 0x02 - IEEE802.11 AP -> STA (Rx) / IEEE802.11 STA -> AP (Tx) - * @li 0x03 - IEEE802.11 AP -> AP (Rx) / IEEE802.11 AP->AP (Tx) - * - * @sa IX_ETHACC_NE_FLAGS - * - */ -#define IX_ETHACC_NE_LINKMASK (0x3 << 4) - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_STMASK - * - * @brief This mask defines if a received frame is a Spanning Tree frame. - * - * This mask applies to @a IX_ETHACC_NE_FLAGS. - * On rx direction, it defines if a received if frame is a Spanning Tree frame. - * Setting this fkag on transmit direction overrides the port settings - * regarding the VLAN options and - * - * @sa IX_ETHACC_NE_FLAGS - * - */ -#define IX_ETHACC_NE_STMASK (0x1 << 6) - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_FILTERMASK - * - * @brief This bit indicates whether a frame has been filtered by the Rx service. - * - * This mask applies to @a IX_ETHACC_NE_FLAGS. - * Certain frames, which should normally be fully filtered by the NPE to due - * the destination MAC address being on the same segment as the Rx port are - * still forwarded to the XScale (although the payload is invalid) in order - * to learn the MAC address of the transmitting station, if this is unknown. - * Normally EthAcc will filter and recycle these framess internally and no - * frames with the FILTER bit set will be received by the client. - * - * @sa IX_ETHACC_NE_FLAGS - * - */ -#define IX_ETHACC_NE_FILTERMASK (0x1 << 7) - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_PORTMASK - * - * @brief This mask defines the rule to transmit a frame - * - * This mask defines the rule to transmit a frame. When set, a frame - * is transmitted to the destination port as set by the macro - * @a IX_ETHACC_NE_DESTPORTID. If not set, the destination port - * is searched using the destination MAC address. - * - * @note This flag is meaningful only for multiport Network Engines. - * - * @sa IX_ETHACC_NE_FLAGS - * @sa IX_ETHACC_NE_DESTPORTID - * - */ -#define IX_ETHACC_NE_PORTOVERMASK (0x1 << 8) - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_TAGMODEMASK - * - * @brief This mask defines the tagging rules to apply to a transmit frame. - * - * This mask defines the tagging rules to apply to a transmit frame - * regardless of the default setting for a port. When used together - * with @a IX_ETHACC_NE_TAGOVERMASK and when set, the - * frame will be tagged prior to transmission. When not set, - * the frame will be untagged prior to transmission. This is accomplished - * irrespective of the Egress tagging rules, constituting a per-frame override. - * - * @sa IX_ETHACC_NE_FLAGS - * @sa IX_ETHACC_NE_TAGOVERMASK - * - */ -#define IX_ETHACC_NE_TAGMODEMASK (0x1 << 9) - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_TAGOVERMASK - * - * @brief This mask defines the rule to transmit a frame - * - * This mask defines the rule to transmit a frame. When set, the - * default transmit rules of a port are overriden. - * When not set, the default rules as set by @ref IxEthDB should apply. - * - * @sa IX_ETHACC_NE_FLAGS - * @sa IX_ETHACC_NE_TAGMODEMASK - * - */ -#define IX_ETHACC_NE_TAGOVERMASK (0x1 << 10) - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_VLANENABLEMASK - * - * @brief This mask defines if a frame is a VLAN frame or not - * - * When set, frames undergo normal VLAN processing on the Tx path - * (membership filtering, tagging, tag removal etc). If this flag is - * not set, the frame is considered to be a regular non-VLAN frame - * and no VLAN processing will be performed. - * - * Note that VLAN-enabled NPE images will always set this flag in all - * Rx frames, and images which are not VLAN enabled will clear this - * flag for all received frames. - * - * @sa IX_ETHACC_NE_FLAGS - * - */ -#define IX_ETHACC_NE_VLANENABLEMASK (0x1 << 14) - -/** - * @ingroup IxEthAcc - * - * @def IX_ETHACC_NE_NEWSRCMASK - * - * @brief This mask defines if a received frame has been learned. - * - * This mask defines if the source MAC address of a frame is - * already known. If the bit is set, the source MAC address was - * unknown to the NPE at the time the frame was received. - * - * @sa IX_ETHACC_NE_FLAGS - * - */ -#define IX_ETHACC_NE_NEWSRCMASK (0x1 << 15) - -/** - * @ingroup IxEthAcc - * - * @brief This defines the recommanded minimum size of MBUF's submitted - * to the frame receive service. - * - */ -#define IX_ETHACC_RX_MBUF_MIN_SIZE (2048) - -/** - * @ingroup IxEthAcc - * - * @brief This defines the highest MII address of any attached PHYs - * - * The maximum number for PHY address is 31, add on for range checking. - * - */ -#define IXP425_ETH_ACC_MII_MAX_ADDR 32 - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccInit(void) - * - * @brief Initializes the IXP400 Ethernet Access Service. - * - * @li Reentrant - no - * @li ISR Callable - no - * - * This should be called once per module initialization. - * @pre - * The NPE must first be downloaded with the required microcode which supports all - * required features. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_FAIL : Service has failed to initialize. - * - *
- */ -PUBLIC IxEthAccStatus ixEthAccInit(void); - - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccUnload(void) - * - * @brief Unload the Ethernet Access Service. - * - * @li Reentrant - no - * @li ISR Callable - no - * - * @return void - * - *
- */ -PUBLIC void ixEthAccUnload(void); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortInit( IxEthAccPortId portId) - * - * @brief Initializes an NPE/Ethernet MAC Port. - * - * The NPE/Ethernet port initialisation includes the following steps - * @li Initialize the NPE/Ethernet MAC hardware. - * @li Verify NPE downloaded and operational. - * @li The NPE shall be available for usage once this API returns. - * @li Verify that the Ethernet port is present before initializing - * - * @li Reentrant - no - * @li ISR Callable - no - * - * This should be called once per mac device. - * The NPE/MAC shall be in disabled state after init. - * - * @pre - * The component must be initialized via @a ixEthAccInit - * The NPE must first be downloaded with the required microcode which supports all - * required features. - * - * Dependant on Services: (Must be initialized before using this service may be initialized) - * ixNPEmh - NPE Message handling service. - * ixQmgr - Queue Manager component. - * - * @param portId @ref IxEthAccPortId [in] - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS: if the ethernet port is not present, a warning is issued. - * @li @a IX_ETH_ACC_FAIL : The NPE processor has failed to initialize. - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * - *
- */ -PUBLIC IxEthAccStatus ixEthAccPortInit(IxEthAccPortId portId); - - -/************************************************************************* - - ##### ## ##### ## ##### ## ##### # # - # # # # # # # # # # # # # # - # # # # # # # # # # # # ###### - # # ###### # ###### ##### ###### # # # - # # # # # # # # # # # # # - ##### # # # # # # # # # # # - -*************************************************************************/ - - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortTxFrameSubmit( - IxEthAccPortId portId, - IX_OSAL_MBUF *buffer, - IxEthAccTxPriority priority) - * - * @brief This function shall be used to submit MBUFs buffers for transmission on a particular MAC device. - * - * When the frame is transmitted, the buffer shall be returned thru the - * callback @a IxEthAccPortTxDoneCallback. - * - * In case of over-submitting, the order of the frames on the - * network may be modified. - * - * Buffers shall be not queued for transmission if the port is disabled. - * The port can be enabled using @a ixEthAccPortEnable - * - * - * @li Reentrant - yes - * @li ISR Callable - yes - * - * - * @pre - * @a ixEthAccPortTxDoneCallbackRegister must be called to register a function to allow this service to - * return the buffer to the calling service. - * - * @note - * If the buffer submit fails for any reason the user has retained ownership of the buffer. - * - * @param portId @ref IxEthAccPortId [in] - MAC port ID to transmit Ethernet frame on. - * @param buffer @ref IX_OSAL_MBUF [in] - pointer to an MBUF formatted buffer. Chained buffers are supported for transmission. - * Chained packets are not supported and the field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is ignored. - * @param priority @ref IxEthAccTxPriority [in] - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_FAIL : Failed to queue frame for transmission. - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ - -PUBLIC IxEthAccStatus ixEthAccPortTxFrameSubmit( - IxEthAccPortId portId, - IX_OSAL_MBUF *buffer, - IxEthAccTxPriority priority); - -/** - * @ingroup IxEthAcc - * - * @brief Function prototype for Ethernet Tx Buffer Done callback. Registered - * via @a ixEthAccTxBufferDoneCallbackRegister - * - * This function is called once the previously submitted buffer is no longer required by this service. - * It may be returned upon successful transmission of the frame or during the shutdown of - * the port prior to the transmission of a queued frame. - * The calling of this registered function is not a guarantee of successful transmission of the buffer. - * - * - * @li Reentrant - yes , The user provided function should be reentrant. - * @li ISR Callable - yes , The user provided function must be callable from an ISR. - * - * - * Calling Context : - * @par - * This callback is called in the context of the queue manager dispatch loop @a ixQmgrgrDispatcherLoopRun - * within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. - * The decision is system specific. - * - * @param callbackTag UINT32 [in] - This tag is that provided when the callback was registered for a particular MAC - * via @a ixEthAccPortTxDoneCallbackRegister. It allows the same callback to be used for multiple MACs. - * @param mbuf @ref IX_OSAL_MBUF [in] - Pointer to the Tx mbuf descriptor. - * - * @return void - * - * @note - * The field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is modified by the access layer and reset to NULL. - * - *
- */ -typedef void (*IxEthAccPortTxDoneCallback) ( UINT32 callbackTag, IX_OSAL_MBUF *buffer ); - - - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortTxDoneCallbackRegister( IxEthAccPortId portId, - IxEthAccPortTxDoneCallback txCallbackFn, - UINT32 callbackTag) - * - * @brief Register a callback function to allow - * the transmitted buffers to return to the user. - * - * This function registers the transmit buffer done function callback for a particular port. - * - * The registered callback function is called once the previously submitted buffer is no longer required by this service. - * It may be returned upon successful transmission of the frame or shutdown of port prior to submission. - * The calling of this registered function is not a guarantee of successful transmission of the buffer. - * - * If called several times the latest callback shall be registered for a particular port. - * - * @li Reentrant - yes - * @li ISR Callable - yes - * - * @pre - * The port must be initialized via @a ixEthAccPortInit - * - * - * @param portId @ref IxEthAccPortId [in] - Register callback for a particular MAC device. - * @param txCallbackFn @ref IxEthAccPortTxDoneCallback [in] - Function to be called to return transmit buffers to the user. - * @param callbackTag UINT32 [in] - This tag shall be provided to the callback function. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid. - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortTxDoneCallbackRegister(IxEthAccPortId portId, - IxEthAccPortTxDoneCallback txCallbackFn, - UINT32 callbackTag); - - - -/** - * @ingroup IxEthAcc - * - * @brief Function prototype for Ethernet Frame Rx callback. Registered via @a ixEthAccPortRxCallbackRegister - * - * It is the responsibility of the user function to free any MBUF's which it receives. - * - * @li Reentrant - yes , The user provided function should be reentrant. - * @li ISR Callable - yes , The user provided function must be callable from an ISR. - * @par - * - * This function dispatches frames to the user level - * via the provided function. The invocation shall be made for each - * frame dequeued from the Ethernet QM queue. The user is required to free any MBUF's - * supplied via this callback. In addition the registered callback must free up MBUF's - * from the receive free queue when the port is disabled - * - * If called several times the latest callback shall be registered for a particular port. - * - * Calling Context : - * @par - * This callback is called in the context of the queue manager dispatch loop @a ixQmgrgrDispatcherLoopRun - * within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. - * The decision is system specific. - * - * - * @param callbackTag UINT32 [in] - This tag is that provided when the callback was registered for a particular MAC - * via @a ixEthAccPortRxCallbackRegister. It allows the same callback to be used for multiple MACs. - * @param mbuf @ref IX_OSAL_MBUF [in] - Pointer to the Rx mbuf header. Mbufs may be chained if - * the frame length is greater than the supplied mbuf length. - * @param reserved [in] - deprecated parameter The information is passed - * thru the IxEthAccNe header destination port ID field - * (@sa IX_ETHACC_NE_DESTPORTID). For backward - * compatibility,the value is equal to IX_ETH_DB_UNKNOWN_PORT (0xff). - * - * @return void - * - * @note - * Buffers may not be filled up to the length supplied in - * @a ixEthAccPortRxFreeReplenish(). The firmware fills - * them to the previous 64 bytes boundary. The user has to be aware - * that the length of the received mbufs may be smaller than the length - * of the supplied mbufs. - * The mbuf header contains the following modified field - * @li @a IX_OSAL_MBUF_PKT_LEN is set in the header of the first mbuf and indicates - * the total frame size - * @li @a IX_OSAL_MBUF_MLEN is set each mbuf header and indicates the payload length - * @li @a IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR contains a pointer to the next - * mbuf, or NULL at the end of a chain. - * @li @a IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is modified. Its value is reset to NULL - * @li @a IX_OSAL_MBUF_FLAGS contains the bit 4 set for a broadcast packet and the bit 5 - * set for a multicast packet. Other bits are unmodified. - * - *
- */ -typedef void (*IxEthAccPortRxCallback) (UINT32 callbackTag, IX_OSAL_MBUF *buffer, UINT32 reserved); - -/** - * @ingroup IxEthAcc - * - * @brief Function prototype for Ethernet Frame Rx callback. Registered via @a ixEthAccPortMultiBufferRxCallbackRegister - * - * It is the responsibility of the user function to free any MBUF's which it receives. - * - * @li Reentrant - yes , The user provided function should be reentrant. - * @li ISR Callable - yes , The user provided function must be callable from an ISR. - * @par - * - * This function dispatches many frames to the user level - * via the provided function. The invocation shall be made for multiple frames - * dequeued from the Ethernet QM queue. The user is required to free any MBUF's - * supplied via this callback. In addition the registered callback must free up MBUF's - * from the receive free queue when the port is disabled - * - * If called several times the latest callback shall be registered for a particular port. - * - * Calling Context : - * @par - * This callback is called in the context of the queue manager dispatch loop @a ixQmgrDispatcherLoopRun - * within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. - * The decision is system specific. - * - * - * @param callbackTag - This tag is that provided when the callback was registered for a particular MAC - * via @a ixEthAccPortMultiBufferRxCallbackRegister. It allows the same callback to be used for multiple MACs. - * @param mbuf - Pointer to an array of Rx mbuf headers. Mbufs - * may be chained if - * the frame length is greater than the supplied mbuf length. - * The end of the array contains a zeroed entry (NULL pointer). - * - * @return void - * - * @note The mbufs passed to this callback have the same structure than the - * buffers passed to @a IxEthAccPortRxCallback interfac. - * - * @note The usage of this callback is exclusive with the usage of - * @a ixEthAccPortRxCallbackRegister and @a IxEthAccPortRxCallback - * - * @sa ixEthAccPortMultiBufferRxCallbackRegister - * @sa IxEthAccPortMultiBufferRxCallback - * @sa ixEthAccPortRxCallbackRegister - * @sa IxEthAccPortRxCallback - *
- */ - -typedef void (*IxEthAccPortMultiBufferRxCallback) (UINT32 callbackTag, IX_OSAL_MBUF **buffer); - - - - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortRxCallbackRegister( IxEthAccPortId portId, IxEthAccPortRxCallback rxCallbackFn, UINT32 callbackTag) - * - * @brief Register a callback function to allow - * the reception of frames. - * - * The registered callback function is called once a frame is received by this service. - * - * If called several times the latest callback shall be registered for a particular port. - * - * - * @li Reentrant - yes - * @li ISR Callable - yes - * - * - * @param portId @ref IxEthAccPortId [in] - Register callback for a particular MAC device. - * @param rxCallbackFn @ref IxEthAccPortRxCallback [in] - Function to be called when Ethernet frames are availble. - * @param callbackTag UINT32 [in] - This tag shall be provided to the callback function. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid. - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortRxCallbackRegister(IxEthAccPortId portId, - IxEthAccPortRxCallback rxCallbackFn, - UINT32 callbackTag); - - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortMultiBufferRxCallbackRegister( IxEthAccPortId portId, IxEthAccPortMultiBufferRxCallback rxCallbackFn, UINT32 callbackTag) - * - * @brief Register a callback function to allow - * the reception of frames. - * - * The registered callback function is called once a frame is - * received by this service. If many frames are already received, - * the function is called once. - * - * If called several times the latest callback shall be registered for a particular port. - * - * @li Reentrant - yes - * @li ISR Callable - yes - * - * - * @param portId - Register callback for a particular MAC device. - * @param rxCallbackFn - @a IxEthAccMultiBufferRxCallbackFn - Function to be called when Ethernet frames are availble. - * @param callbackTag - This tag shall be provided to the callback function. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid. - * - * @sa ixEthAccPortMultiBufferRxCallbackRegister - * @sa IxEthAccPortMultiBufferRxCallback - * @sa ixEthAccPortRxCallbackRegister - * @sa IxEthAccPortRxCallback - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortMultiBufferRxCallbackRegister(IxEthAccPortId portId, - IxEthAccPortMultiBufferRxCallback rxCallbackFn, - UINT32 callbackTag); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortRxFreeReplenish( IxEthAccPortId portId, IX_OSAL_MBUF *buffer) - * - * @brief This function provides buffers for the Ethernet receive path. - * - * This component does not have a buffer management mechanisms built in. All Rx buffers must be supplied to it - * via this interface. - * - * @li Reentrant - yes - * @li ISR Callable - yes - * - * @param portId @ref IxEthAccPortId [in] - Provide buffers only to specific Rx MAC. - * @param buffer @ref IX_OSAL_MBUF [in] - Provide an MBUF to the Ethernet receive mechanism. - * Buffers size smaller than IX_ETHACC_RX_MBUF_MIN_SIZE may result in poor - * performances and excessive buffer chaining. Buffers - * larger than this size may be suitable for jumbo frames. - * Chained packets are not supported and the field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR must be NULL. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_FAIL : Buffer has was not able to queue the - * buffer in the receive service. - * @li @a IX_ETH_ACC_FAIL : Buffer size is less than IX_ETHACC_RX_MBUF_MIN_SIZE - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - * @note - * If the buffer replenish operation fails it is the responsibility - * of the user to free the buffer. - * - * @note - * Sufficient buffers must be supplied to the component to maintain - * receive throughput and avoid rx buffer underflow conditions. - * To meet this goal, It is expected that the user preload the - * component with a sufficent number of buffers prior to enabling the - * NPE Ethernet receive path. The recommended minimum number of - * buffers is 8. - * - * @note - * For maximum performances, the mbuf size should be greater - * than the maximum frame size (Ethernet header, payload and FCS) + 64. - * Supplying smaller mbufs to the service results in mbuf - * chaining and degraded performances. The recommended size - * is @a IX_ETHACC_RX_MBUF_MIN_SIZE, which is - * enough to take care of 802.3 frames and "baby jumbo" frames without - * chaining, and "jumbo" frame within chaining. - * - * @note - * Buffers may not be filled up to their length. The firware fills - * them up to the previous 64 bytes boundary. The user has to be aware - * that the length of the received mbufs may be smaller than the length - * of the supplied mbufs. - * - * @warning This function checks the parameters if the NDEBUG - * flag is not defined. Turning on the argument checking (disabled by - * default) results in a lower EthAcc performance as this function - * is part of the data path. - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortRxFreeReplenish( IxEthAccPortId portId, IX_OSAL_MBUF *buffer); - - - -/*************************************************************** - - #### #### # # ##### ##### #### # - # # # # ## # # # # # # # - # # # # # # # # # # # # - # # # # # # # ##### # # # - # # # # # ## # # # # # # - #### #### # # # # # #### ###### - - - ##### # ## # # ###### - # # # # # ## # # - # # # # # # # # ##### - ##### # ###### # # # # - # # # # # ## # - # ###### # # # # ###### - -***************************************************************/ - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortEnable(IxEthAccPortId portId) - * - * @brief This enables an Ethernet port for both Tx and Rx. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @pre The port must first be initialized via @a ixEthAccPortInit and the MAC address - * must be set using @a ixEthAccUnicastMacAddressSet before enabling it - * The rx and Tx Done callbacks registration via @a - * ixEthAccPortTxDoneCallbackRegister amd @a ixEthAccPortRxCallbackRegister - * has to be done before enabling the traffic. - * - * @param portId @ref IxEthAccPortId [in] - Port id to act upon. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is not initialized - * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized - * - *
- */ -PUBLIC IxEthAccStatus ixEthAccPortEnable(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortDisable(IxEthAccPortId portId) - * - * @brief This disables an Ethernet port for both Tx and Rx. - * - * Free MBufs are returned to the user via the registered callback when the port is disabled - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @pre The port must be enabled with @a ixEthAccPortEnable, otherwise this - * function has no effect - * - * @param portId @ref IxEthAccPortId [in] - Port id to act upon. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is not initialized - * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized - * - *
- */ -PUBLIC IxEthAccStatus ixEthAccPortDisable(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortEnabledQuery(IxEthAccPortId portId, BOOL *enabled) - * - * @brief Get the enabled state of a port. - * - * @li Reentrant - yes - * @li ISR Callable - yes - * - * @pre The port must first be initialized via @a ixEthAccPortInit - * - * @param portId @ref IxEthAccPortId [in] - Port id to act upon. - * @param enabled BOOL [out] - location to store the state of the port - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortEnabledQuery(IxEthAccPortId portId, BOOL *enabled); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortPromiscuousModeClear(IxEthAccPortId portId) - * - * @brief Put the Ethernet MAC device in non-promiscuous mode. - * - * In non-promiscuous mode the MAC filters all frames other than - * destination MAC address which matches the following criteria: - * @li Unicast address provisioned via @a ixEthAccUnicastMacAddressSet - * @li All broadcast frames. - * @li Multicast addresses provisioned via @a ixEthAccMulticastAddressJoin - * - * Other functions modify the MAC filtering - * - * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast - * frames are forwarded to the application - * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the - * effects of @a ixEthAccPortMulticastAddressJoinAll() - * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new - * filtering address - * @li @a ixEthAccPortMulticastAddressJoin() - provision a new - * filtering address - * @li @a ixEthAccPortPromiscuousModeSet() - all frames are - * forwarded to the application regardless of the multicast - * address provisioned - * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded - * to the application following the multicast address provisioned - * - * In all cases, unicast and broadcast addresses are forwarded to - * the application. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @sa ixEthAccPortPromiscuousModeSet - * - * @param portId @ref IxEthAccPortId [in] - Ethernet port id. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeClear(IxEthAccPortId portId); - - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortPromiscuousModeSet(IxEthAccPortId portId) - * - * @brief Put the MAC device in promiscuous mode. - * - * If the device is in promiscuous mode then all all received frames shall be forwared - * to the NPE for processing. - * - * Other functions modify the MAC filtering - * - * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast - * frames are forwarded to the application - * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the - * effects of @a ixEthAccPortMulticastAddressJoinAll() - * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new - * filtering address - * @li @a ixEthAccPortMulticastAddressJoin() - provision a new - * filtering address - * @li @a ixEthAccPortPromiscuousModeSet() - all frames are - * forwarded to the application regardless of the multicast - * address provisioned - * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded - * to the application following the multicast address provisioned - * - * In all cases, unicast and broadcast addresses are forwarded to - * the application. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @sa ixEthAccPortPromiscuousModeClear - * - * @param portId @ref IxEthAccPortId [in] - Ethernet port id. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeSet(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortUnicastMacAddressSet( IxEthAccPortId portId, - IxEthAccMacAddr *macAddr) - * - * @brief Configure unicast MAC address for a particular port - * - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - Ethernet port id. - * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus ixEthAccPortUnicastMacAddressSet(IxEthAccPortId portId, - IxEthAccMacAddr *macAddr); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortUnicastMacAddressGet( IxEthAccPortId portId, - IxEthAccMacAddr *macAddr) - * - * @brief Get unicast MAC address for a particular MAC port - * - * @pre - * The MAC address must first be set via @a ixEthAccMacPromiscuousModeSet - * If the MAC address has not been set, the function returns a - * IX_ETH_ACC_MAC_UNINITIALIZED status - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - Ethernet port id. - * @param *macAddr @ref IxEthAccMacAddr [out] - Ethernet MAC address. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized. - * @li @a IX_ETH_ACC_FAIL : macAddr is invalid. - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortUnicastMacAddressGet(IxEthAccPortId portId, - IxEthAccMacAddr *macAddr); - - - - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortMulticastAddressJoin( IxEthAccPortId portId, - IxEthAccMacAddr *macAddr) - * - * @brief Add a multicast address to the MAC address table. - * - * @note - * Due to the operation of the Ethernet MAC multicast filtering mechanism, frames which do not - * have a multicast destination address which were provisioned via this API may be forwarded - * to the NPE's. This is a result of the hardware comparison algorithm used in the destination mac address logic - * within the Ethernet MAC. - * - * See Also: IXP425 hardware development manual. - * - * Other functions modify the MAC filtering - * - * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast - * frames are forwarded to the application - * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the - * effects of @a ixEthAccPortMulticastAddressJoinAll() - * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new - * filtering address - * @li @a ixEthAccPortMulticastAddressJoin() - provision a new - * filtering address - * @li @a ixEthAccPortPromiscuousModeSet() - all frames are - * forwarded to the application regardless of the multicast - * address provisioned - * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded - * to the application following the multicast address provisioned - * - * In all cases, unicast and broadcast addresses are forwarded to - * the application. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - Ethernet port id. - * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_FAIL : Error writing to the MAC registers - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortMulticastAddressJoin(IxEthAccPortId portId, - IxEthAccMacAddr *macAddr); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortMulticastAddressJoinAll( IxEthAccPortId portId) - * - * @brief Filter all frames with multicast dest. - * - * This function clears the MAC address table, and then sets - * the MAC to forward ALL multicast frames to the NPE. - * Specifically, it forwards all frames whose destination address - * has the LSB of the highest byte set (01:00:00:00:00:00). This - * bit is commonly referred to as the "multicast bit". - * Broadcast frames will still be forwarded. - * - * Other functions modify the MAC filtering - * - * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast - * frames are forwarded to the application - * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the - * effects of @a ixEthAccPortMulticastAddressJoinAll() - * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new - * filtering address - * @li @a ixEthAccPortMulticastAddressJoin() - provision a new - * filtering address - * @li @a ixEthAccPortPromiscuousModeSet() - all frames are - * forwarded to the application regardless of the multicast - * address provisioned - * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded - * to the application following the multicast address provisioned - * - * In all cases, unicast and broadcast addresses are forwarded to - * the application. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - Ethernet port id. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortMulticastAddressJoinAll(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortMulticastAddressLeave( IxEthAccPortId portId, - IxEthAccMacAddr *macAddr) - * - * @brief Remove a multicast address from the MAC address table. - * - * Other functions modify the MAC filtering - * - * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast - * frames are forwarded to the application - * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the - * effects of @a ixEthAccPortMulticastAddressJoinAll() - * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new - * filtering address - * @li @a ixEthAccPortMulticastAddressJoin() - provision a new - * filtering address - * @li @a ixEthAccPortPromiscuousModeSet() - all frames are - * forwarded to the application regardless of the multicast - * address provisioned - * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded - * to the application following the multicast address provisioned - * - * In all cases, unicast and broadcast addresses are forwarded to - * the application. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - Ethernet port id. - * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_NO_SUCH_ADDR : Failed if MAC address was not in the table. - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortMulticastAddressLeave(IxEthAccPortId portId, - IxEthAccMacAddr *macAddr); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortMulticastAddressLeaveAll( IxEthAccPortId portId) - * - * @brief This function unconfigures the multicast filtering settings - * - * This function first clears the MAC address table, and then sets - * the MAC as configured by the promiscuous mode current settings. - * - * Other functions modify the MAC filtering - * - * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast - * frames are forwarded to the application - * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the - * effects of @a ixEthAccPortMulticastAddressJoinAll() - * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new - * filtering address - * @li @a ixEthAccPortMulticastAddressJoin() - provision a new - * filtering address - * @li @a ixEthAccPortPromiscuousModeSet() - all frames are - * forwarded to the application regardless of the multicast - * address provisioned - * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded - * to the application following the multicast address provisioned - * - * In all cases, unicast and broadcast addresses are forwarded to - * the application. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - Ethernet port id. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortMulticastAddressLeaveAll(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortUnicastAddressShow(IxEthAccPortId portId) - * - * @brief Displays unicast MAC address - * - * Displays unicast address which is configured using - * @a ixEthAccUnicastMacAddressSet. This function also displays the MAC filter used - * to filter multicast frames. - * - * Other functions modify the MAC filtering - * - * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast - * frames are forwarded to the application - * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the - * effects of @a ixEthAccPortMulticastAddressJoinAll() - * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new - * filtering address - * @li @a ixEthAccPortMulticastAddressJoin() - provision a new - * filtering address - * @li @a ixEthAccPortPromiscuousModeSet() - all frames are - * forwarded to the application regardless of the multicast - * address provisioned - * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded - * to the application following the multicast address provisioned - * - * In all cases, unicast and broadcast addresses are forwarded to - * the application. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - Ethernet port id. - * - * @return void - * - *
- */ -PUBLIC IxEthAccStatus ixEthAccPortUnicastAddressShow(IxEthAccPortId portId); - - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortMulticastAddressShow( IxEthAccPortId portId) - * - * @brief Displays multicast MAC address - * - * Displays multicast address which have been configured using @a ixEthAccMulticastAddressJoin - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - Ethernet port id. - * - * @return void - * - *
- */ -PUBLIC void ixEthAccPortMulticastAddressShow( IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortDuplexModeSet( IxEthAccPortId portId, IxEthAccDuplexMode mode ) - * - * @brief Set the duplex mode for the MAC. - * - * Configure the IXP400 MAC to either full or half duplex. - * - * @note - * The configuration should match that provisioned on the PHY. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - * @param mode @ref IxEthAccDuplexMode [in] - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortDuplexModeSet(IxEthAccPortId portId,IxEthAccDuplexMode mode); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortDuplexModeGet( IxEthAccPortId portId, IxEthAccDuplexMode *mode ) - * - * @brief Get the duplex mode for the MAC. - * - * return the duplex configuration of the IXP400 MAC. - * - * @note - * The configuration should match that provisioned on the PHY. - * See @a ixEthAccDuplexModeSet - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - * @param *mode @ref IxEthAccDuplexMode [out] - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- * - */ -PUBLIC IxEthAccStatus -ixEthAccPortDuplexModeGet(IxEthAccPortId portId,IxEthAccDuplexMode *mode ); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortTxFrameAppendPaddingEnable( IxEthAccPortId portId) - * - * @brief Enable padding bytes to be appended to runt frames submitted to - * this port - * - * Enable up to 60 null-bytes padding bytes to be appended to runt frames - * submitted to this port. This is the default behavior of the access - * component. - * - * @warning Do not change this behaviour while the port is enabled. - * - * @note When Tx padding is enabled, Tx FCS generation is turned on - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @sa ixEthAccPortTxFrameAppendFCSDusable - * - * @param portId @ref IxEthAccPortId [in] - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortTxFrameAppendPaddingEnable(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortTxFrameAppendPaddingDisable( IxEthAccPortId portId) - * - * @brief Disable padding bytes to be appended to runt frames submitted to - * this port - * - * Disable padding bytes to be appended to runt frames - * submitted to this port. This is not the default behavior of the access - * component. - * - * @warning Do not change this behaviour while the port is enabled. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortTxFrameAppendPaddingDisable(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortTxFrameAppendFCSEnable( IxEthAccPortId portId) - * - * @brief Enable the appending of Ethernet FCS to all frames submitted to this port - * - * When enabled, the FCS is added to the submitted frames. This is the default - * behavior of the access component. - * Do not change this behaviour while the port is enabled. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortTxFrameAppendFCSEnable(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortTxFrameAppendFCSDisable( IxEthAccPortId portId) - * - * @brief Disable the appending of Ethernet FCS to all frames submitted to this port. - * - * When disabled, the Ethernet FCS is not added to the submitted frames. - * This is not the default - * behavior of the access component. - * - * @note Since the FCS is not appended to the frame it is expected that the frame submitted to the - * component includes a valid FCS at the end of the data, although this will not be validated. - * - * The component shall forward the frame to the Ethernet MAC WITHOUT modification. - * - * Do not change this behaviour while the port is enabled. - * - * @note Tx FCS append is not disabled while Tx padding is enabled. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @sa ixEthAccPortTxFrameAppendPaddingEnable - * - * @param portId @ref IxEthAccPortId [in] - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortTxFrameAppendFCSDisable(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortRxFrameAppendFCSEnable( IxEthAccPortId portId) - * - * @brief Forward frames with FCS included in the receive buffer. - * - * The FCS is not striped from the receive buffer. - * The received frame length includes the FCS size (4 bytes). ie. - * A minimum sized ethernet frame shall have a length of 64bytes. - * - * Frame FCS validity checks are still carried out on all received frames. - * - * This is not the default - * behavior of the access component. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortRxFrameAppendFCSEnable(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccPortRxFrameAppendFCSDisable( IxEthAccPortId portId) - * - * @brief Do not forward the FCS portion of the received Ethernet frame to the user. - * The FCS is striped from the receive buffer. - * The received frame length does not include the FCS size (4 bytes). - * Frame FCS validity checks are still carried out on all received frames. - * - * This is the default behavior of the component. - * Do not change this behaviour while the port is enabled. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortRxFrameAppendFCSDisable(IxEthAccPortId portId); - - - - -/** - * @ingroup IxEthAcc - * - * @enum IxEthAccSchedulerDiscipline - * - * @brief Definition for the port scheduling discipline - * - * Select the port scheduling discipline on receive and transmit path - * @li FIFO : No Priority : In this configuration all frames are processed - * in the access component in the strict order in which - * the component received them. - * @li FIFO : Priority : This shall be a very simple priority mechanism. - * Higher prior-ity frames shall be forwarded - * before lower priority frames. There shall be no - * fairness mechanisms applied across different - * priorities. Higher priority frames could starve - * lower priority frames indefinitely. - */ -typedef enum -{ - FIFO_NO_PRIORITY, /** - */ -PUBLIC IxEthAccStatus -ixEthAccTxSchedulingDisciplineSet(IxEthAccPortId portId, - IxEthAccSchedulerDiscipline sched); - - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccRxSchedulingDisciplineSet(IxEthAccSchedulerDiscipline sched) - * - * @brief Set the Rx scheduling to one of @a IxEthAccSchedulerDiscipline - * - * The default behavior of the component is @a FIFO_NO_PRIORITY. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @pre - * - * @param sched : @a IxEthAccSchedulerDiscipline - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS : Set appropriate discipline. - * @li @a IX_ETH_ACC_FAIL : Invalid/unsupported discipline. - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccRxSchedulingDisciplineSet(IxEthAccSchedulerDiscipline sched); - -/** - * @ingroup IxEthAcc - * - * @fn IxEthAccStatus ixEthAccNpeLoopbackEnable(IxEthAccPortId portId) - * - * @brief Enable NPE loopback - * - * When this loopback mode is enabled all the transmitted frames are - * received on the same port, without payload. - * - * This function is recommended for power-up diagnostic checks and - * should never be used under normal Ethernet traffic operations. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @pre - * - * @param portId : ID of the port - * - * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is - * guaranteed to restore correct Ethernet Tx/Rx operation. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS : NPE loopback mode enabled - * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortNpeLoopbackEnable(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn IxEthAccStatus ixEthAccPortNpeLoopbackDisable(IxEthAccPortId portId) - * - * @brief Disable NPE loopback - * - * This function is used to disable the NPE loopback if previously - * enabled using ixEthAccNpeLoopbackEnable. - * - * This function is recommended for power-up diagnostic checks and - * should never be used under normal Ethernet traffic operations. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @pre - * - * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is - * guaranteed to restore correct Ethernet Tx/Rx operation. - * - * @param portId : ID of the port - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS : NPE loopback successfully disabled - * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortNpeLoopbackDisable(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn IxEthAccStatus ixEthAccPortTxEnable(IxEthAccPortId portId) - * - * @brief Enable Tx on the port - * - * This function is the complement of ixEthAccPortTxDisable and should - * be used only after Tx was disabled. A MAC core reset is required before - * this function is called (see @a ixEthAccPortMacReset). - * - * This function is the recommended usage scenario for emergency security - * shutdown and hardware failure recovery and should never be used for throttling - * traffic. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @pre - * - * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is - * guaranteed to restore correct Ethernet Tx/Rx operation. - * - * @param portId : ID of the port - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS : Tx successfully enabled - * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortTxEnable(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn IxEthAccStatus ixEthAccPortTxDisable(IxEthAccPortId portId) - * - * @brief Disable Tx on the port - * - * This function can be used to disable Tx in the MAC core. - * Tx can be re-enabled, although this is not guaranteed, by performing - * a MAC core reset (@a ixEthAccPortMacReset) and calling ixEthAccPortTxEnable. - * Note that using this function is not recommended, except for shutting - * down Tx for emergency reasons. For proper port shutdown and re-enabling - * see ixEthAccPortEnable and ixEthAccPortDisable. - * - * This function is the recommended usage scenario for emergency security - * shutdown and hardware failure recovery and should never be used for throttling - * traffic. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is - * guaranteed to restore correct Ethernet Tx/Rx operation. - * - * @pre - * - * @param portId : ID of the port - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS : Tx successfully disabled - * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortTxDisable(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn IxEthAccStatus ixEthAccPortRxEnable(IxEthAccPortId portId) - * - * @brief Enable Rx on the port - * - * This function is the complement of ixEthAccPortRxDisable and should - * be used only after Rx was disabled. - * - * This function is the recommended usage scenario for emergency security - * shutdown and hardware failure recovery and should never be used for throttling - * traffic. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is - * guaranteed to restore correct Ethernet Tx/Rx operation. - * - * @pre - * - * @param portId : ID of the port - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS : Rx successfully enabled - * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortRxEnable(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn IxEthAccStatus ixEthAccPortRxDisable(IxEthAccPortId portId) - * - * @brief Disable Rx on the port - * - * This function can be used to disable Rx in the MAC core. - * Rx can be re-enabled, although this is not guaranteed, by performing - * a MAC core reset (@a ixEthAccPortMacReset) and calling ixEthAccPortRxEnable. - * Note that using this function is not recommended, except for shutting - * down Rx for emergency reasons. For proper port shutdown and re-enabling - * see ixEthAccPortEnable and ixEthAccPortDisable. - * - * This function is the recommended usage scenario for emergency security - * shutdown and hardware failure recovery and should never be used for throttling - * traffic. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @pre - * - * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is - * guaranteed to restore correct Ethernet Tx/Rx operation. - * - * @param portId : ID of the port - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS : Rx successfully disabled - * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortRxDisable(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn IxEthAccStatus ixEthAccPortMacReset(IxEthAccPortId portId) - * - * @brief Reset MAC core on the port - * - * This function will perform a MAC core reset (NPE Ethernet coprocessor). - * This function is inherently unsafe and the NPE recovery is not guaranteed - * after this function is called. The proper manner of performing port disable - * and enable (which will reset the MAC as well) is ixEthAccPortEnable/ixEthAccPortDisable. - * - * This function is the recommended usage scenario for hardware failure recovery - * and should never be used for throttling traffic. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @pre - * - * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is - * guaranteed to restore correct Ethernet Tx/Rx operation. - * - * @param portId : ID of the port - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS : MAC core reset - * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccPortMacReset(IxEthAccPortId portId); - -/********************************************************************************* - #### ##### ## ##### # #### ##### # #### #### - # # # # # # # # # # # # - #### # # # # # #### # # # #### - # # ###### # # # # # # # - # # # # # # # # # # # # # # # - #### # # # # # #### # # #### #### -**********************************************************************************/ - - -/** - * - * @brief This struct defines the statistics returned by this component. - * - * The component returns MIB2 EthObj variables which are obtained from the - * hardware or maintained by this component. - * - * - */ -typedef struct -{ - UINT32 dot3StatsAlignmentErrors; /**< link error count (rx) */ - UINT32 dot3StatsFCSErrors; /**< link error count (rx) */ - UINT32 dot3StatsInternalMacReceiveErrors; /**< link error count (rx) */ - UINT32 RxOverrunDiscards; /**< NPE: discarded frames count (rx) */ - UINT32 RxLearnedEntryDiscards; /**< NPE: discarded frames count(rx) */ - UINT32 RxLargeFramesDiscards; /**< NPE: discarded frames count(rx) */ - UINT32 RxSTPBlockedDiscards; /**< NPE: discarded frames count(rx) */ - UINT32 RxVLANTypeFilterDiscards; /**< NPE: discarded frames count (rx) */ - UINT32 RxVLANIdFilterDiscards; /**< NPE: discarded frames count (rx) */ - UINT32 RxInvalidSourceDiscards; /**< NPE: discarded frames count (rx) */ - UINT32 RxBlackListDiscards; /**< NPE: discarded frames count (rx) */ - UINT32 RxWhiteListDiscards; /**< NPE: discarded frames count (rx) */ - UINT32 RxUnderflowEntryDiscards; /**< NPE: discarded frames count (rx) */ - UINT32 dot3StatsSingleCollisionFrames; /**< link error count (tx) */ - UINT32 dot3StatsMultipleCollisionFrames; /**< link error count (tx) */ - UINT32 dot3StatsDeferredTransmissions; /**< link error count (tx) */ - UINT32 dot3StatsLateCollisions; /**< link error count (tx) */ - UINT32 dot3StatsExcessiveCollsions; /**< link error count (tx) */ - UINT32 dot3StatsInternalMacTransmitErrors; /**< link error count (tx) */ - UINT32 dot3StatsCarrierSenseErrors; /**< link error count (tx) */ - UINT32 TxLargeFrameDiscards; /**< NPE: discarded frames count (tx) */ - UINT32 TxVLANIdFilterDiscards; /**< NPE: discarded frames count (tx) */ - -}IxEthEthObjStats; - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccMibIIStatsGet(IxEthAccPortId portId ,IxEthEthObjStats *retStats ) - * - * @brief Returns the statistics maintained for a port. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @pre - * - * - * @param portId @ref IxEthAccPortId [in] - * @param retStats @ref IxEthEthObjStats [out] - * @note Please note the user is responsible for cache coheriency of the retStat - * buffer. The data is actually populated via the NPE's. As such cache safe - * memory should be used in the retStats argument. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_FAIL : Invalid arguments. - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccMibIIStatsGet(IxEthAccPortId portId, IxEthEthObjStats *retStats ); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccMibIIStatsGetClear(IxEthAccPortId portId, IxEthEthObjStats *retStats) - * - * @brief Returns and clears the statistics maintained for a port. - * - * @li Reentrant - yes - * @li ISR Callable - yes - * - * @pre - * - * @param portId @ref IxEthAccPortId [in] - * @param retStats @ref IxEthEthObjStats [out] - * @note Please note the user is responsible for cache coheriency of the retStats - * buffer. The data is actually populated via the NPE's. As such cache safe - * memory should be used in the retStats argument. - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_FAIL : invalid arguments. - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccMibIIStatsGetClear(IxEthAccPortId portId, IxEthEthObjStats *retStats); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccMibIIStatsClear(IxEthAccPortId portId) - * - * @brief Clears the statistics maintained for a port. - * - * @li Reentrant - yes - * @li ISR Callable - no - * - * @pre - * - * @param portId @ref IxEthAccPortId [in] - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_FAIL : Invalid arguments. - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized - * - *
- */ -PUBLIC IxEthAccStatus ixEthAccMibIIStatsClear(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccMacInit(IxEthAccPortId portId) - * - * @brief Initializes the ethernet MAC settings - * - * @li Reentrant - no - * @li ISR Callable - no - * - * @param portId @ref IxEthAccPortId [in] - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. - * - *
- */ -PUBLIC IxEthAccStatus ixEthAccMacInit(IxEthAccPortId portId); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccStatsShow(IxEthAccPortId portId) - * - * - * @brief Displays a ports statistics on the standard io console using printf. - * - * @li Reentrant - no - * @li ISR Callable - no - * - * @pre - * - * @param portId @ref IxEthAccPortId [in] - * - * @return void - * - *
- */ -PUBLIC void ixEthAccStatsShow(IxEthAccPortId portId); - -/************************************************************************* - - # # # # # # ##### # #### - ## ## # # ## ## # # # # # - # ## # # # # ## # # # # # # - # # # # # # # # # # # - # # # # # # # # # # # - # # # # # # ##### # #### - -*************************************************************************/ - - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccMiiReadRtn (UINT8 phyAddr, - UINT8 phyReg, - UINT16 *value) - * - * - * @brief Reads a 16 bit value from a PHY - * - * Reads a 16-bit word from a register of a MII-compliant PHY. Reading - * is performed through the MII management interface. This function returns - * when the read operation has successfully completed, or when a timeout has elapsed. - * - * @li Reentrant - no - * @li ISR Callable - no - * - * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. - * - * @param phyAddr UINT8 [in] - the address of the Ethernet PHY (0-31) - * @param phyReg UINT8 [in] - the number of the MII register to read (0-31) - * @param value UINT16 [in] - the value read from the register - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_FAIL : failed to read the register. - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccMiiReadRtn (UINT8 phyAddr, UINT8 phyReg, UINT16 *value); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccMiiWriteRtn (UINT8 phyAddr, - UINT8 phyReg, - UINT16 value) - * - * - * @brief Writes a 16 bit value to a PHY - * - * Writes a 16-bit word from a register of a MII-compliant PHY. Writing - * is performed through the MII management interface. This function returns - * when the write operation has successfully completed, or when a timeout has elapsed. - * - * @li Reentrant - no - * @li ISR Callable - no - * - * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. - * - * @param phyAddr UINT8 [in] - the address of the Ethernet PHY (0-31) - * @param phyReg UINT8 [in] - the number of the MII register to write (0-31) - * @param value UINT16 [out] - the value to write to the register - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_FAIL : failed to write register. - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccMiiWriteRtn (UINT8 phyAddr, UINT8 phyReg, UINT16 value); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccMiiAccessTimeoutSet(UINT32 timeout) - * - * @brief Overrides the default timeout value and retry count when reading or - * writing MII registers using ixEthAccMiiWriteRtn or ixEthAccMiiReadRtn - * - * The default behavior of the component is to use a IX_ETH_ACC_MII_10TH_SEC_IN_MILLIS ms - * timeout (declared as 100 in IxEthAccMii_p.h) and a retry count of IX_ETH_ACC_MII_TIMEOUT_10TH_SECS - * (declared as 5 in IxEthAccMii_p.h). - * - * The MII read and write functions will attempt to read the status of the register up - * to the retry count times, delaying between each attempt with the timeout value. - * - * @li Reentrant - no - * @li ISR Callable - no - * - * @pre - * - * @param timeout UINT32 [in] - new timeout value, in milliseconds - * @param timeout UINT32 [in] - new retry count (a minimum value of 1 must be used) - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_FAIL : invalid parameter(s) - * - *
- */ -PUBLIC IxEthAccStatus -ixEthAccMiiAccessTimeoutSet(UINT32 timeout, UINT32 retryCount); - -/** - * @ingroup IxEthAcc - * - * @fn ixEthAccMiiStatsShow (UINT32 phyAddr) - * - * - * @brief Displays detailed information on a specified PHY - * - * Displays the current values of the first eigth MII registers for a PHY, - * - * @li Reentrant - no - * @li ISR Callable - no - * - * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and - * generating the MDIO clock. - * - * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31) - * - * @return IxEthAccStatus - * @li @a IX_ETH_ACC_SUCCESS - * @li @a IX_ETH_ACC_FAIL : invalid arguments. - * - *
- */ -PUBLIC IxEthAccStatus ixEthAccMiiStatsShow (UINT32 phyAddr); - - - -/******* BOARD SPECIFIC DEPRECATED API *********/ - -/* The following functions are high level functions which rely - * on the properties and interface of some Ethernet PHYs. The - * implementation is hardware specific and has been moved to - * the hardware-specific component IxEthMii. - */ - - #include "IxEthMii.h" - -/** - * @ingroup IxEthAcc - * - * @def ixEthAccMiiPhyScan - * - * @brief : deprecated API entry point. This definition - * ensures backward compatibility - * - * See @ref ixEthMiiPhyScan - * - * @note this feature is board specific - * - */ -#define ixEthAccMiiPhyScan(phyPresent) ixEthMiiPhyScan(phyPresent,IXP425_ETH_ACC_MII_MAX_ADDR) - -/** - * @ingroup IxEthAcc - * - * @def ixEthAccMiiPhyConfig - * - * @brief : deprecated API entry point. This definition - * ensures backward compatibility - * - * See @ref ixEthMiiPhyConfig - * - * @note this feature is board specific - */ -#define ixEthAccMiiPhyConfig(phyAddr,speed100,fullDuplex,autonegotiate) \ - ixEthMiiPhyConfig(phyAddr,speed100,fullDuplex,autonegotiate) - -/** - * @ingroup IxEthAcc - * - * @def ixEthAccMiiPhyReset - * - * @brief : deprecated API entry point. This definition - * ensures backward compatibility - * - * See @ref ixEthMiiPhyReset - * - * @note this feature is board specific - */ -#define ixEthAccMiiPhyReset(phyAddr) \ - ixEthMiiPhyReset(phyAddr) - -/** - * @ingroup IxEthAcc - * - * @def ixEthAccMiiLinkStatus - * - * @brief : deprecated API entry point. This definition - * ensures backward compatibility - * - * See @ref ixEthMiiLinkStatus - * - * @note this feature is board specific - */ -#define ixEthAccMiiLinkStatus(phyAddr,linkUp,speed100,fullDuplex,autoneg) \ - ixEthMiiLinkStatus(phyAddr,linkUp,speed100,fullDuplex,autoneg) - - - -/** - * @ingroup IxEthAcc - * - * @def ixEthAccMiiShow - * - * @brief : deprecated API entry point. This definition - * ensures backward compatibility - * - * See @ref ixEthMiiPhyShow - * - * @note this feature is board specific - */ -#define ixEthAccMiiShow(phyAddr) \ - ixEthMiiPhyShow(phyAddr) - -#endif /* ndef IxEthAcc_H */ -/** - *@} - */ diff --git a/drivers/net/npe/include/IxEthAccDataPlane_p.h b/drivers/net/npe/include/IxEthAccDataPlane_p.h deleted file mode 100644 index dce43d9a19..0000000000 --- a/drivers/net/npe/include/IxEthAccDataPlane_p.h +++ /dev/null @@ -1,221 +0,0 @@ -/** - * @file IxEthAccDataPlane_p.h - * - * @author Intel Corporation - * @date 12-Feb-2002 - * - * @brief Internal Header file for IXP425 Ethernet Access component. - * - * Design Notes: - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - - - -#ifndef IxEthAccDataPlane_p_H -#define IxEthAccDataPlane_p_H - -#include -#include - -/** - * @addtogroup IxEthAccPri - *@{ - */ - -/* typedefs global to this file*/ - -typedef struct -{ - IX_OSAL_MBUF *pHead; - IX_OSAL_MBUF *pTail; -}IxEthAccDataPlaneQList; - - -/** - * @struct IxEthAccDataPlaneStats - * @brief Statistics data structure associated with the data plane - * - */ -typedef struct -{ - UINT32 addToSwQ; - UINT32 removeFromSwQ; - UINT32 unchainedTxMBufs; - UINT32 chainedTxMBufs; - UINT32 unchainedTxDoneMBufs; - UINT32 chainedTxDoneMBufs; - UINT32 unchainedRxMBufs; - UINT32 chainedRxMBufs; - UINT32 unchainedRxFreeMBufs; - UINT32 chainedRxFreeMBufs; - UINT32 rxCallbackCounter; - UINT32 rxCallbackBurstRead; - UINT32 txDoneCallbackCounter; - UINT32 unexpectedError; -} IxEthAccDataPlaneStats; - -/** - * @fn ixEthAccMbufFromSwQ - * @brief used during disable steps to convert mbufs from - * swq format, ready to be pushed into hw queues for NPE, - * back into XScale format - */ -IX_OSAL_MBUF *ixEthAccMbufFromSwQ(IX_OSAL_MBUF *mbuf); - -/** - * @fn ixEthAccDataPlaneShow - * @brief Show function (for data plane statistics - */ -void ixEthAccDataPlaneShow(void); - -/* - * lock dataplane when atomic operation is required - */ -#define IX_ETH_ACC_DATA_PLANE_LOCK(arg) arg = ixOsalIrqLock(); -#define IX_ETH_ACC_DATA_PLANE_UNLOCK(arg) ixOsalIrqUnlock(arg); - -/* - * Use MBUF fields - */ -#define IX_ETHACC_NE_SHARED(mBufPtr) \ - ((IxEthAccNe *)&((mBufPtr)->ix_ne)) - -#if 1 - -#define IX_ETHACC_NE_NEXT(mBufPtr) (mBufPtr)->ix_ne.reserved[0] - -/* tm - wrong!! len and pkt_len are in the second word - #define IX_ETHACC_NE_LEN(mBufPtr) (mBufPtr)->ix_ne.reserved[3] */ -#define IX_ETHACC_NE_LEN(mBufPtr) (mBufPtr)->ix_ne.reserved[1] - -#define IX_ETHACC_NE_DATA(mBufPtr)(mBufPtr)->ix_ne.reserved[2] - -#else - -#define IX_ETHACC_NE_NEXT(mBufPtr) \ - IX_ETHACC_NE_SHARED(mBufPtr)->ixReserved_next - -#define IX_ETHACC_NE_LEN(mBufPtr) \ - IX_ETHACC_NE_SHARED(mBufPtr)->ixReserved_lengths - -#define IX_ETHACC_NE_DATA(mBufPtr) \ - IX_ETHACC_NE_SHARED(mBufPtr)->ixReserved_data -#endif - -/* - * Use MBUF next pointer field to chain data. - */ -#define IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER(mbuf) (mbuf)->ix_ctrl.ix_chain - - - -#define IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(mbuf_list) ((mbuf_list.pHead) == NULL) - - -#define IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD(mbuf_list,mbuf_to_add) \ - do { \ - int lockVal; \ - IX_ETH_ACC_DATA_PLANE_LOCK(lockVal); \ - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.addToSwQ); \ - if ( (mbuf_list.pHead) != NULL ) \ - { \ - (IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_add))) = (mbuf_list.pHead);\ - (mbuf_list.pHead) = (mbuf_to_add); \ - } \ - else { \ - (mbuf_list.pTail) = (mbuf_list.pHead) = (mbuf_to_add); \ - IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_add)) = NULL; \ - } \ - IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); \ - } while(0) - - -#define IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_TAIL(mbuf_list,mbuf_to_add) \ - do { \ - int lockVal; \ - IX_ETH_ACC_DATA_PLANE_LOCK(lockVal); \ - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.addToSwQ); \ - if ( (mbuf_list.pHead) == NULL ) \ - { \ - (mbuf_list.pHead) = mbuf_to_add; \ - IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_add)) = NULL; \ - } \ - else { \ - IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_list.pTail)) = (mbuf_to_add); \ - IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_add)) = NULL; \ - } \ - (mbuf_list.pTail) = mbuf_to_add; \ - IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); \ - } while (0) - - -#define IX_ETH_ACC_DATAPLANE_REMOVE_MBUF_FROM_Q_HEAD(mbuf_list,mbuf_to_rem) \ - do { \ - int lockVal; \ - IX_ETH_ACC_DATA_PLANE_LOCK(lockVal); \ - if ( (mbuf_list.pHead) != NULL ) \ - { \ - IX_ETH_ACC_STATS_INC(ixEthAccDataStats.removeFromSwQ); \ - (mbuf_to_rem) = (mbuf_list.pHead) ; \ - (mbuf_list.pHead) = (IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_rem)));\ - } \ - else { \ - (mbuf_to_rem) = NULL; \ - } \ - IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); \ - } while (0) - - -/** - * @brief message handler QManager entries for NPE id => port ID conversion (NPE_B => 0, NPE_C => 1) - */ -#define IX_ETH_ACC_PORT_TO_NPE_ID(port) \ - ixEthAccPortData[(port)].npeId - -#define IX_ETH_ACC_NPE_TO_PORT_ID(npe) ((npe == 0 ? 2 : (npe == 1 ? 0 : ( npe == 2 ? 1 : -1 )))) - -#define IX_ETH_ACC_PORT_TO_TX_Q_ID(port) \ - ixEthAccPortData[(port)].ixEthAccTxData.txQueue - -#define IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(port) \ - ixEthAccPortData[(port)].ixEthAccRxData.rxFreeQueue - -#define IX_ETH_ACC_PORT_TO_TX_Q_SOURCE(port) (port == IX_ETH_PORT_1 ? IX_ETH_ACC_TX_FRAME_ENET0_Q_SOURCE : (port == IX_ETH_PORT_2 ? IX_ETH_ACC_TX_FRAME_ENET1_Q_SOURCE : IX_ETH_ACC_TX_FRAME_ENET2_Q_SOURCE)) - -#define IX_ETH_ACC_PORT_TO_RX_FREE_Q_SOURCE(port) (port == IX_ETH_PORT_1 ? IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q_SOURCE : (port == IX_ETH_PORT_2 ? IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q_SOURCE : IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q_SOURCE )) - -/* Flush the mbufs chain and all data pointed to by the mbuf */ - -#ifndef NDEBUG -#define IX_ETH_ACC_STATS_INC(x) (x++) -#else -#define IX_ETH_ACC_STATS_INC(x) -#endif - -#define IX_ETH_ACC_MAX_TX_FRAMES_TO_SUBMIT 128 - -void ixEthRxFrameQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId); -void ixEthRxMultiBufferQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId); -void ixEthTxFrameDoneQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId); - -#endif /* IxEthAccDataPlane_p_H */ - - -/** - *@} - */ - diff --git a/drivers/net/npe/include/IxEthAccMac_p.h b/drivers/net/npe/include/IxEthAccMac_p.h deleted file mode 100644 index 4eafab2585..0000000000 --- a/drivers/net/npe/include/IxEthAccMac_p.h +++ /dev/null @@ -1,224 +0,0 @@ -/* - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - - -#ifndef IxEthAccMac_p_H -#define IxEthAccMac_p_H - -#include "IxOsal.h" - -#define IX_ETH_ACC_MAX_MULTICAST_ADDRESSES 256 -#define IX_ETH_ACC_NUM_PORTS 3 -#define IX_ETH_ACC_MAX_FRAME_SIZE_DEFAULT 1536 -#define IX_ETH_ACC_MAX_FRAME_SIZE_UPPER_RANGE (65536-64) -#define IX_ETH_ACC_MAX_FRAME_SIZE_LOWER_RANGE 64 - -/* - * - * MAC register definitions - * - */ -#define IX_ETH_ACC_MAC_0_BASE IX_OSAL_IXP400_ETHA_PHYS_BASE -#define IX_ETH_ACC_MAC_1_BASE IX_OSAL_IXP400_ETHB_PHYS_BASE -#define IX_ETH_ACC_MAC_2_BASE IX_OSAL_IXP400_ETH_NPEA_PHYS_BASE - -#define IX_ETH_ACC_MAC_TX_CNTRL1 0x000 -#define IX_ETH_ACC_MAC_TX_CNTRL2 0x004 -#define IX_ETH_ACC_MAC_RX_CNTRL1 0x010 -#define IX_ETH_ACC_MAC_RX_CNTRL2 0x014 -#define IX_ETH_ACC_MAC_RANDOM_SEED 0x020 -#define IX_ETH_ACC_MAC_THRESH_P_EMPTY 0x030 -#define IX_ETH_ACC_MAC_THRESH_P_FULL 0x038 -#define IX_ETH_ACC_MAC_BUF_SIZE_TX 0x040 -#define IX_ETH_ACC_MAC_TX_DEFER 0x050 -#define IX_ETH_ACC_MAC_RX_DEFER 0x054 -#define IX_ETH_ACC_MAC_TX_TWO_DEFER_1 0x060 -#define IX_ETH_ACC_MAC_TX_TWO_DEFER_2 0x064 -#define IX_ETH_ACC_MAC_SLOT_TIME 0x070 -#define IX_ETH_ACC_MAC_MDIO_CMD_1 0x080 -#define IX_ETH_ACC_MAC_MDIO_CMD_2 0x084 -#define IX_ETH_ACC_MAC_MDIO_CMD_3 0x088 -#define IX_ETH_ACC_MAC_MDIO_CMD_4 0x08c -#define IX_ETH_ACC_MAC_MDIO_STS_1 0x090 -#define IX_ETH_ACC_MAC_MDIO_STS_2 0x094 -#define IX_ETH_ACC_MAC_MDIO_STS_3 0x098 -#define IX_ETH_ACC_MAC_MDIO_STS_4 0x09c -#define IX_ETH_ACC_MAC_ADDR_MASK_1 0x0A0 -#define IX_ETH_ACC_MAC_ADDR_MASK_2 0x0A4 -#define IX_ETH_ACC_MAC_ADDR_MASK_3 0x0A8 -#define IX_ETH_ACC_MAC_ADDR_MASK_4 0x0AC -#define IX_ETH_ACC_MAC_ADDR_MASK_5 0x0B0 -#define IX_ETH_ACC_MAC_ADDR_MASK_6 0x0B4 -#define IX_ETH_ACC_MAC_ADDR_1 0x0C0 -#define IX_ETH_ACC_MAC_ADDR_2 0x0C4 -#define IX_ETH_ACC_MAC_ADDR_3 0x0C8 -#define IX_ETH_ACC_MAC_ADDR_4 0x0CC -#define IX_ETH_ACC_MAC_ADDR_5 0x0D0 -#define IX_ETH_ACC_MAC_ADDR_6 0x0D4 -#define IX_ETH_ACC_MAC_INT_CLK_THRESH 0x0E0 -#define IX_ETH_ACC_MAC_UNI_ADDR_1 0x0F0 -#define IX_ETH_ACC_MAC_UNI_ADDR_2 0x0F4 -#define IX_ETH_ACC_MAC_UNI_ADDR_3 0x0F8 -#define IX_ETH_ACC_MAC_UNI_ADDR_4 0x0FC -#define IX_ETH_ACC_MAC_UNI_ADDR_5 0x100 -#define IX_ETH_ACC_MAC_UNI_ADDR_6 0x104 -#define IX_ETH_ACC_MAC_CORE_CNTRL 0x1FC - - -/* - * - *Bit definitions - * - */ - -/* TX Control Register 1*/ - -#define IX_ETH_ACC_TX_CNTRL1_TX_EN BIT(0) -#define IX_ETH_ACC_TX_CNTRL1_DUPLEX BIT(1) -#define IX_ETH_ACC_TX_CNTRL1_RETRY BIT(2) -#define IX_ETH_ACC_TX_CNTRL1_PAD_EN BIT(3) -#define IX_ETH_ACC_TX_CNTRL1_FCS_EN BIT(4) -#define IX_ETH_ACC_TX_CNTRL1_2DEFER BIT(5) -#define IX_ETH_ACC_TX_CNTRL1_RMII BIT(6) - -/* TX Control Register 2 */ -#define IX_ETH_ACC_TX_CNTRL2_RETRIES_MASK 0xf - -/* RX Control Register 1 */ -#define IX_ETH_ACC_RX_CNTRL1_RX_EN BIT(0) -#define IX_ETH_ACC_RX_CNTRL1_PADSTRIP_EN BIT(1) -#define IX_ETH_ACC_RX_CNTRL1_CRC_EN BIT(2) -#define IX_ETH_ACC_RX_CNTRL1_PAUSE_EN BIT(3) -#define IX_ETH_ACC_RX_CNTRL1_LOOP_EN BIT(4) -#define IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN BIT(5) -#define IX_ETH_ACC_RX_CNTRL1_RX_RUNT_EN BIT(6) -#define IX_ETH_ACC_RX_CNTRL1_BCAST_DIS BIT(7) - -/* RX Control Register 2 */ -#define IX_ETH_ACC_RX_CNTRL2_DEFER_EN BIT(0) - - - -/* Core Control Register */ -#define IX_ETH_ACC_CORE_RESET BIT(0) -#define IX_ETH_ACC_CORE_RX_FIFO_FLUSH BIT(1) -#define IX_ETH_ACC_CORE_TX_FIFO_FLUSH BIT(2) -#define IX_ETH_ACC_CORE_SEND_JAM BIT(3) -#define IX_ETH_ACC_CORE_MDC_EN BIT(4) - -/* 1st bit of 1st MAC octet */ -#define IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT ( 1) - - -/* - * - * Default values - * - */ - - -#define IX_ETH_ACC_TX_CNTRL1_DEFAULT (IX_ETH_ACC_TX_CNTRL1_TX_EN | \ - IX_ETH_ACC_TX_CNTRL1_RETRY | \ - IX_ETH_ACC_TX_CNTRL1_FCS_EN | \ - IX_ETH_ACC_TX_CNTRL1_2DEFER | \ - IX_ETH_ACC_TX_CNTRL1_PAD_EN) - -#define IX_ETH_ACC_TX_MAX_RETRIES_DEFAULT 0x0f - -#define IX_ETH_ACC_RX_CNTRL1_DEFAULT (IX_ETH_ACC_RX_CNTRL1_CRC_EN \ - | IX_ETH_ACC_RX_CNTRL1_RX_EN) - -#define IX_ETH_ACC_RX_CNTRL2_DEFAULT 0x0 - -/* Thresholds determined by NPE firmware FS */ -#define IX_ETH_ACC_MAC_THRESH_P_EMPTY_DEFAULT 0x12 -#define IX_ETH_ACC_MAC_THRESH_P_FULL_DEFAULT 0x30 - -/* Number of bytes that must be in the tx fifo before - transmission commences*/ -#define IX_ETH_ACC_MAC_BUF_SIZE_TX_DEFAULT 0x8 - -/* One-part deferral values */ -#define IX_ETH_ACC_MAC_TX_DEFER_DEFAULT 0x15 -#define IX_ETH_ACC_MAC_RX_DEFER_DEFAULT 0x16 - -/* Two-part deferral values... */ -#define IX_ETH_ACC_MAC_TX_TWO_DEFER_1_DEFAULT 0x08 -#define IX_ETH_ACC_MAC_TX_TWO_DEFER_2_DEFAULT 0x07 - -/* This value applies to MII */ -#define IX_ETH_ACC_MAC_SLOT_TIME_DEFAULT 0x80 - -/* This value applies to RMII */ -#define IX_ETH_ACC_MAC_SLOT_TIME_RMII_DEFAULT 0xFF - -#define IX_ETH_ACC_MAC_ADDR_MASK_DEFAULT 0xFF - -#define IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT 0x1 -/*The following is a value chosen at random*/ -#define IX_ETH_ACC_RANDOM_SEED_DEFAULT 0x8 - -/*By default we must configure the MAC to generate the - MDC clock*/ -#define IX_ETH_ACC_CORE_DEFAULT (IX_ETH_ACC_CORE_MDC_EN) - -#define IXP425_ETH_ACC_MAX_PHY 2 -#define IXP425_ETH_ACC_MAX_AN_ENTRIES 20 -#define IX_ETH_ACC_MAC_RESET_DELAY 1 - -#define IX_ETH_ACC_MAC_ALL_BITS_SET 0xFF - -#define IX_ETH_ACC_MAC_MSGID_SHL 24 - -#define IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS 20 -#define IX_ETH_ACC_PORT_DISABLE_DELAY_COUNT 200 /* 4 seconds timeout */ -#define IX_ETH_ACC_PORT_DISABLE_RETRY_COUNT 3 -#define IX_ETH_ACC_MIB_STATS_DELAY_MSECS 2000 /* 2 seconds delay for ethernet stats */ - -/*Register access macros*/ -#if (CPU == SIMSPARCSOLARIS) -extern void registerWriteStub (UINT32 base, UINT32 offset, UINT32 val); -extern UINT32 registerReadStub (UINT32 base, UINT32 offset); - -#define REG_WRITE(b,o,v) registerWriteStub(b, o, v) -#define REG_READ(b,o,v) do { v = registerReadStub(b, o); } while (0) -#else -#define REG_WRITE(b,o,v) IX_OSAL_WRITE_LONG((volatile UINT32 *)(b + o), v) -#define REG_READ(b,o,v) (v = IX_OSAL_READ_LONG((volatile UINT32 *)(b + o))) - -#endif - -void ixEthAccMacUnload(void); -IxEthAccStatus ixEthAccMacMemInit(void); - -/* MAC core loopback */ -IxEthAccStatus ixEthAccPortLoopbackEnable(IxEthAccPortId portId); -IxEthAccStatus ixEthAccPortLoopbackDisable(IxEthAccPortId portId); - -/* MAC core traffic control */ -IxEthAccStatus ixEthAccPortTxEnablePriv(IxEthAccPortId portId); -IxEthAccStatus ixEthAccPortTxDisablePriv(IxEthAccPortId portId); -IxEthAccStatus ixEthAccPortRxEnablePriv(IxEthAccPortId portId); -IxEthAccStatus ixEthAccPortRxDisablePriv(IxEthAccPortId portId); -IxEthAccStatus ixEthAccPortMacResetPriv(IxEthAccPortId portId); - -/* NPE software loopback */ -IxEthAccStatus ixEthAccNpeLoopbackDisablePriv(IxEthAccPortId portId); -IxEthAccStatus ixEthAccNpeLoopbackEnablePriv(IxEthAccPortId portId); - -#endif /*IxEthAccMac_p_H*/ - diff --git a/drivers/net/npe/include/IxEthAccMii_p.h b/drivers/net/npe/include/IxEthAccMii_p.h deleted file mode 100644 index aff30f00af..0000000000 --- a/drivers/net/npe/include/IxEthAccMii_p.h +++ /dev/null @@ -1,73 +0,0 @@ -/** - * @file IxEthAccMii_p.h - * - * @author Intel Corporation - * @date - * - * @brief MII Header file - * - * Design Notes: - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#ifndef IxEthAccMii_p_H -#define IxEthAccMii_p_H - -/* MII definitions - these have been verified against the LXT971 and LXT972 PHYs*/ - -#define IXP425_ETH_ACC_MII_MAX_REG 32 /* max register per phy */ - -#define IX_ETH_ACC_MII_REG_SHL 16 -#define IX_ETH_ACC_MII_ADDR_SHL 21 - -/* Definitions for MII access routines*/ - -#define IX_ETH_ACC_MII_GO BIT(31) -#define IX_ETH_ACC_MII_WRITE BIT(26) -#define IX_ETH_ACC_MII_TIMEOUT_10TH_SECS 5 -#define IX_ETH_ACC_MII_10TH_SEC_IN_MILLIS 100 -#define IX_ETH_ACC_MII_READ_FAIL BIT(31) - -#define IX_ETH_ACC_MII_PHY_DEF_DELAY 300 /* max delay before link up, etc. */ -#define IX_ETH_ACC_MII_PHY_NO_DELAY 0x0 /* do not delay */ -#define IX_ETH_ACC_MII_PHY_NULL 0xff /* PHY is not present */ -#define IX_ETH_ACC_MII_PHY_DEF_ADDR 0x0 /* default PHY's logical address */ - -#ifndef IX_ETH_ACC_MII_MONITOR_DELAY -# define IX_ETH_ACC_MII_MONITOR_DELAY 0x5 /* in seconds */ -#endif - -/* Register definition */ - -#define IX_ETH_ACC_MII_CTRL_REG 0x0 /* Control Register */ -#define IX_ETH_ACC_MII_STAT_REG 0x1 /* Status Register */ -#define IX_ETH_ACC_MII_PHY_ID1_REG 0x2 /* PHY identifier 1 Register */ -#define IX_ETH_ACC_MII_PHY_ID2_REG 0x3 /* PHY identifier 2 Register */ -#define IX_ETH_ACC_MII_AN_ADS_REG 0x4 /* Auto-Negotiation */ - /* Advertisement Register */ -#define IX_ETH_ACC_MII_AN_PRTN_REG 0x5 /* Auto-Negotiation */ - /* partner ability Register */ -#define IX_ETH_ACC_MII_AN_EXP_REG 0x6 /* Auto-Negotiation */ - /* Expansion Register */ -#define IX_ETH_ACC_MII_AN_NEXT_REG 0x7 /* Auto-Negotiation */ - /* next-page transmit Register */ - -IxEthAccStatus ixEthAccMdioShow (void); -IxEthAccStatus ixEthAccMiiInit(void); -void ixEthAccMiiUnload(void); - -#endif /*IxEthAccMii_p_H*/ diff --git a/drivers/net/npe/include/IxEthAccQueueAssign_p.h b/drivers/net/npe/include/IxEthAccQueueAssign_p.h deleted file mode 100644 index 65661a0dd5..0000000000 --- a/drivers/net/npe/include/IxEthAccQueueAssign_p.h +++ /dev/null @@ -1,113 +0,0 @@ -/** - * @file IxEthAccQueueAssign_p.h - * - * @author Intel Corporation - * @date 06-Mar-2002 - * - * @brief Mapping from QMgr Q's to internal assignment - * - * Design Notes: - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/** - * @addtogroup IxEthAccPri - *@{ - */ - -/* - * Os/System dependancies. - */ -#include "IxOsal.h" - -/* - * Intermodule dependancies - */ -#include "IxQMgr.h" -#include "IxQueueAssignments.h" - -/* Check range of Q's assigned to this component. */ -#if IX_ETH_ACC_RX_FRAME_ETH_Q >= (IX_QMGR_MIN_QUEUPP_QID ) | \ - IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q >= (IX_QMGR_MIN_QUEUPP_QID) | \ - IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q >= (IX_QMGR_MIN_QUEUPP_QID) | \ - IX_ETH_ACC_TX_FRAME_ENET0_Q >= (IX_QMGR_MIN_QUEUPP_QID) | \ - IX_ETH_ACC_TX_FRAME_ENET1_Q >= (IX_QMGR_MIN_QUEUPP_QID) | \ - IX_ETH_ACC_TX_FRAME_DONE_ETH_Q >= (IX_QMGR_MIN_QUEUPP_QID) -#error "Not all Ethernet Access Queues are betweem 1-31, requires full functionalty Q's unless otherwise validated " -#endif - -/** -* -* @typedef IxEthAccQregInfo -* -* @brief -* -*/ -typedef struct -{ - IxQMgrQId qId; - char *qName; - IxQMgrCallback qCallback; - IxQMgrCallbackId callbackTag; - IxQMgrQSizeInWords qSize; - IxQMgrQEntrySizeInWords qWords; - BOOL qNotificationEnableAtStartup; - IxQMgrSourceId qConditionSource; - IxQMgrWMLevel AlmostEmptyThreshold; - IxQMgrWMLevel AlmostFullThreshold; - -} IxEthAccQregInfo; - -/* - * Prototypes for all QM callbacks. - */ - -/* - * Rx Callbacks - */ -IX_ETH_ACC_PUBLIC -void ixEthRxFrameQMCallback(IxQMgrQId, IxQMgrCallbackId); - -IX_ETH_ACC_PUBLIC -void ixEthRxMultiBufferQMCallback(IxQMgrQId, IxQMgrCallbackId); - -IX_ETH_ACC_PUBLIC -void ixEthRxFreeQMCallback(IxQMgrQId, IxQMgrCallbackId); - -/* - * Tx Callback. - */ -IX_ETH_ACC_PUBLIC -void ixEthTxFrameQMCallback(IxQMgrQId, IxQMgrCallbackId); - -IX_ETH_ACC_PUBLIC -void ixEthTxFrameDoneQMCallback(IxQMgrQId, IxQMgrCallbackId ); - - -#define IX_ETH_ACC_QM_QUEUE_DISPATCH_PRIORITY (IX_QMGR_Q_PRIORITY_0) /* Highest priority */ - -/* - * Queue watermarks - */ -#define IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_NOT_E ) -#define IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_E ) -#define IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_E ) -#define IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_E ) -#define IX_ETH_ACC_TX_FRAME_ENET0_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_E ) -#define IX_ETH_ACC_TX_FRAME_ENET1_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_E ) -#define IX_ETH_ACC_TX_FRAME_ENET2_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_E ) -#define IX_ETH_ACC_TX_FRAME_DONE_ETH_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_NOT_E ) diff --git a/drivers/net/npe/include/IxEthAcc_p.h b/drivers/net/npe/include/IxEthAcc_p.h deleted file mode 100644 index 1348f4e3c8..0000000000 --- a/drivers/net/npe/include/IxEthAcc_p.h +++ /dev/null @@ -1,301 +0,0 @@ -/** - * @file IxEthAcc_p.h - * - * @author Intel Corporation - * @date 12-Feb-2002 - * - * @brief Internal Header file for IXP425 Ethernet Access component. - * - * Design Notes: - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/** - * @addtogroup IxEthAccPri - *@{ - */ - -#ifndef IxEthAcc_p_H -#define IxEthAcc_p_H - -/* - * Os/System dependancies. - */ -#include "IxOsal.h" - -/* - * Intermodule dependancies - */ -#include "IxNpeDl.h" -#include "IxQMgr.h" - -#include "IxEthNpe.h" - -/* - * Intra module dependancies - */ - -#include "IxEthAccDataPlane_p.h" -#include "IxEthAccMac_p.h" - - -#define INLINE __inline__ - -#ifdef NDEBUG - -#define IX_ETH_ACC_PRIVATE static - -#else - -#define IX_ETH_ACC_PRIVATE - -#endif /* ndef NDEBUG */ - -#define IX_ETH_ACC_PUBLIC - - -#define IX_ETH_ACC_IS_PORT_VALID(port) ((port) < IX_ETH_ACC_NUMBER_OF_PORTS ? true : false ) - - - -#ifndef NDEBUG -#define IX_ETH_ACC_FATAL_LOG(a,b,c,d,e,f,g) { ixOsalLog ( IX_OSAL_LOG_LVL_FATAL,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);} -#define IX_ETH_ACC_WARNING_LOG(a,b,c,d,e,f,g) { ixOsalLog ( IX_OSAL_LOG_LVL_WARNING,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);} -#define IX_ETH_ACC_DEBUG_LOG(a,b,c,d,e,f,g) { ixOsalLog ( IX_OSAL_LOG_LVL_FATAL,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);} -#else -#define IX_ETH_ACC_FATAL_LOG(a,b,c,d,e,f,g) { ixOsalLog ( IX_OSAL_LOG_LVL_FATAL,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);} -#define IX_ETH_ACC_WARNING_LOG(a,b,c,d,e,f,g) { ixOsalLog ( IX_OSAL_LOG_LVL_WARNING,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);} -#define IX_ETH_ACC_DEBUG_LOG(a,b,c,d,e,f,g) {} -#endif - -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccInitDataPlane(void); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccQMgrQueuesConfig(void); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccQMgrRxCallbacksRegister(IxQMgrCallback ixQMgrCallback); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccSingleEthNpeCheck(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC void ixEthAccQMgrRxQEntryGet(UINT32 *numRxQueueEntries); - -/* prototypes for the private control plane functions (used by the control interface wrapper) */ -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortEnablePriv(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortDisablePriv(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortEnabledQueryPriv(IxEthAccPortId portId, BOOL *enabled); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeClearPriv(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeSetPriv(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortUnicastMacAddressSetPriv(IxEthAccPortId portId, IxEthAccMacAddr *macAddr); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortUnicastMacAddressGetPriv(IxEthAccPortId portId, IxEthAccMacAddr *macAddr); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortMulticastAddressJoinPriv(IxEthAccPortId portId, IxEthAccMacAddr *macAddr); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortMulticastAddressJoinAllPriv(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortMulticastAddressLeavePriv(IxEthAccPortId portId, IxEthAccMacAddr *macAddr); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortMulticastAddressLeaveAllPriv(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortUnicastAddressShowPriv(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC void ixEthAccPortMulticastAddressShowPriv(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortDuplexModeSetPriv(IxEthAccPortId portId, IxEthAccDuplexMode mode); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortDuplexModeGetPriv(IxEthAccPortId portId, IxEthAccDuplexMode *mode); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortTxFrameAppendPaddingEnablePriv(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortTxFrameAppendPaddingDisablePriv(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortTxFrameAppendFCSEnablePriv(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortTxFrameAppendFCSDisablePriv(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortRxFrameAppendFCSEnablePriv(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortRxFrameAppendFCSDisablePriv(IxEthAccPortId portId); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccTxSchedulingDisciplineSetPriv(IxEthAccPortId portId, IxEthAccSchedulerDiscipline sched); -IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccRxSchedulingDisciplineSetPriv(IxEthAccSchedulerDiscipline sched); - -/** - * @struct ixEthAccRxDataStats - * @brief Stats data structures for data path. - Not obtained from h/w - * - */ -typedef struct -{ - UINT32 rxFrameClientCallback; - UINT32 rxFreeRepOK; - UINT32 rxFreeRepDelayed; - UINT32 rxFreeRepFromSwQOK; - UINT32 rxFreeRepFromSwQDelayed; - UINT32 rxFreeLateNotificationEnabled; - UINT32 rxFreeLowCallback; - UINT32 rxFreeOverflow; - UINT32 rxFreeLock; - UINT32 rxDuringDisable; - UINT32 rxSwQDuringDisable; - UINT32 rxUnlearnedMacAddress; - UINT32 rxPriority[IX_ETH_ACC_TX_PRIORITY_7 + 1]; - UINT32 rxUnexpectedError; - UINT32 rxFiltered; -} IxEthAccRxDataStats; - -/** - * @struct IxEthAccTxDataStats - * @brief Stats data structures for data path. - Not obtained from h/w - * - */ -typedef struct -{ - UINT32 txQOK; - UINT32 txQDelayed; - UINT32 txFromSwQOK; - UINT32 txFromSwQDelayed; - UINT32 txLowThreshCallback; - UINT32 txDoneClientCallback; - UINT32 txDoneClientCallbackDisable; - UINT32 txOverflow; - UINT32 txLock; - UINT32 txPriority[IX_ETH_ACC_TX_PRIORITY_7 + 1]; - UINT32 txLateNotificationEnabled; - UINT32 txDoneDuringDisable; - UINT32 txDoneSwQDuringDisable; - UINT32 txUnexpectedError; -} IxEthAccTxDataStats; - -/* port Disable state machine : list of states */ -typedef enum -{ - /* general port states */ - DISABLED = 0, - ACTIVE, - - /* particular Tx/Rx states */ - REPLENISH, - RECEIVE, - TRANSMIT, - TRANSMIT_DONE -} IxEthAccPortDisableState; - -typedef struct -{ - BOOL fullDuplex; - BOOL rxFCSAppend; - BOOL txFCSAppend; - BOOL txPADAppend; - BOOL enabled; - BOOL promiscuous; - BOOL joinAll; - IxOsalMutex ackMIBStatsLock; - IxOsalMutex ackMIBStatsResetLock; - IxOsalMutex MIBStatsGetAccessLock; - IxOsalMutex MIBStatsGetResetAccessLock; - IxOsalMutex npeLoopbackMessageLock; - IxEthAccMacAddr mcastAddrsTable[IX_ETH_ACC_MAX_MULTICAST_ADDRESSES]; - UINT32 mcastAddrIndex; - IX_OSAL_MBUF *portDisableTxMbufPtr; - IX_OSAL_MBUF *portDisableRxMbufPtr; - - volatile IxEthAccPortDisableState portDisableState; - volatile IxEthAccPortDisableState rxState; - volatile IxEthAccPortDisableState txState; - - BOOL initDone; - BOOL macInitialised; -} IxEthAccMacState; - -/** - * @struct IxEthAccRxInfo - * @brief System-wide data structures associated with the data plane. - * - */ -typedef struct -{ - IxQMgrQId higherPriorityQueue[IX_QMGR_MAX_NUM_QUEUES]; /**< higher priority queue list */ - IxEthAccSchedulerDiscipline schDiscipline; /**< Receive Xscale QoS type */ -} IxEthAccInfo; - -/** - * @struct IxEthAccRxDataInfo - * @brief Per Port data structures associated with the receive data plane. - * - */ -typedef struct -{ - IxQMgrQId rxFreeQueue; /**< rxFree Queue for this port */ - IxEthAccPortRxCallback rxCallbackFn; - UINT32 rxCallbackTag; - IxEthAccDataPlaneQList freeBufferList; - IxEthAccPortMultiBufferRxCallback rxMultiBufferCallbackFn; - UINT32 rxMultiBufferCallbackTag; - BOOL rxMultiBufferCallbackInUse; - IxEthAccRxDataStats stats; /**< Receive s/w stats */ -} IxEthAccRxDataInfo; - -/** - * @struct IxEthAccTxDataInfo - * @brief Per Port data structures associated with the transmit data plane. - * - */ -typedef struct -{ - IxEthAccPortTxDoneCallback txBufferDoneCallbackFn; - UINT32 txCallbackTag; - IxEthAccDataPlaneQList txQ[IX_ETH_ACC_NUM_TX_PRIORITIES]; /**< Transmit Q */ - IxEthAccSchedulerDiscipline schDiscipline; /**< Transmit Xscale QoS */ - IxQMgrQId txQueue; /**< txQueue for this port */ - IxEthAccTxDataStats stats; /**< Transmit s/w stats */ -} IxEthAccTxDataInfo; - - -/** - * @struct IxEthAccPortDataInfo - * @brief Per Port data structures associated with the port data plane. - * - */ -typedef struct -{ - BOOL portInitialized; - UINT32 npeId; /**< NpeId for this port */ - IxEthAccTxDataInfo ixEthAccTxData; /**< Transmit data control structures */ - IxEthAccRxDataInfo ixEthAccRxData; /**< Receive data control structures */ -} IxEthAccPortDataInfo; - -extern IxEthAccPortDataInfo ixEthAccPortData[]; -#define IX_ETH_IS_PORT_INITIALIZED(port) (ixEthAccPortData[port].portInitialized) - -extern BOOL ixEthAccServiceInit; -#define IX_ETH_ACC_IS_SERVICE_INITIALIZED() (ixEthAccServiceInit == true ) - -/* - * Maximum number of frames to consume from the Rx Frame Q. - */ - -#define IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK (128) - -/* - * Max number of times to load the Rx Free Q from callback. - */ -#define IX_ETH_ACC_MAX_RX_FREE_BUFFERS_LOAD (256) /* Set greater than depth of h/w Q + drain time at line rate */ - -/* - * Max number of times to read from the Tx Done Q in one sitting. - */ - -#define IX_ETH_ACC_MAX_TX_FRAME_DONE_CONSUME_PER_CALLBACK (256) - -/* - * Max number of times to take buffers from S/w queues and write them to the H/w Tx - * queues on receipt of a Tx low threshold callback - */ - -#define IX_ETH_ACC_MAX_TX_FRAME_TX_CONSUME_PER_CALLBACK (16) - - -#define IX_ETH_ACC_FLUSH_CACHE(addr,size) IX_OSAL_CACHE_FLUSH((addr),(size)) -#define IX_ETH_ACC_INVALIDATE_CACHE(addr,size) IX_OSAL_CACHE_INVALIDATE((addr),(size)) - - -#define IX_ETH_ACC_MEMSET(start,value,size) memset(start,value,size) - -#endif /* ndef IxEthAcc_p_H */ - - - diff --git a/drivers/net/npe/include/IxEthDB.h b/drivers/net/npe/include/IxEthDB.h deleted file mode 100644 index 9c4a6a4ec4..0000000000 --- a/drivers/net/npe/include/IxEthDB.h +++ /dev/null @@ -1,2349 +0,0 @@ -/** @file IxEthDB.h - * - * @brief this file contains the public API of @ref IxEthDB component - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - * - */ - -#ifndef IxEthDB_H -#define IxEthDB_H - -#include -#include - -/** - * @defgroup IxEthDB IXP400 Ethernet Database (IxEthDB) API - * - * @brief ethDB is a library that does provides a MAC address database learning/filtering capability - * - *@{ - */ - -#define INLINE __inline__ - -#define IX_ETH_DB_PRIVATE PRIVATE /* imported from IxTypes.h */ - -#define IX_ETH_DB_PUBLIC PUBLIC - -/** - * @brief port ID => message handler NPE id conversion (0 => NPE_B, 1 => NPE_C) - */ -#define IX_ETH_DB_PORT_ID_TO_NPE(id) (id == 0 ? 1 : (id == 1 ? 2 : (id == 2 ? 0 : -1))) - -/** - * @def IX_ETH_DB_NPE_TO_PORT_ID(npe) - * @brief message handler NPE id => port ID conversion (NPE_B => 0, NPE_C => 1) - */ -#define IX_ETH_DB_NPE_TO_PORT_ID(npe) (npe == 0 ? 2 : (npe == 1 ? 0 : (npe == 2 ? 1 : -1))) - -/* temporary define - won't work for Azusa */ -#define IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(id) (IX_ETH_DB_PORT_ID_TO_NPE(id) << 4) -#define IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(id) (IX_ETH_DB_NPE_TO_PORT_ID(id >> 4)) - -/** - * @def IX_IEEE803_MAC_ADDRESS_SIZE - * @brief The size of the MAC address - */ -#define IX_IEEE803_MAC_ADDRESS_SIZE (6) - -/** - * @def IX_IEEE802_1Q_QOS_PRIORITY_COUNT - * @brief Number of QoS priorities defined by IEEE802.1Q - */ -#define IX_IEEE802_1Q_QOS_PRIORITY_COUNT (8) - -/** - * @enum IxEthDBStatus - * @brief Ethernet Database API return values - */ -typedef enum /* IxEthDBStatus */ -{ - IX_ETH_DB_SUCCESS = IX_SUCCESS, /**< Success */ - IX_ETH_DB_FAIL = IX_FAIL, /**< Failure */ - IX_ETH_DB_INVALID_PORT, /**< Invalid port */ - IX_ETH_DB_PORT_UNINITIALIZED, /**< Port not initialized */ - IX_ETH_DB_MAC_UNINITIALIZED, /**< MAC not initialized */ - IX_ETH_DB_INVALID_ARG, /**< Invalid argument */ - IX_ETH_DB_NO_SUCH_ADDR, /**< Address not found for search or delete operations */ - IX_ETH_DB_NOMEM, /**< Learning database memory full */ - IX_ETH_DB_BUSY, /**< Learning database cannot complete operation, access temporarily blocked */ - IX_ETH_DB_END, /**< Database browser passed the end of the record set */ - IX_ETH_DB_INVALID_VLAN, /**< Invalid VLAN ID (valid range is 0..4094, 0 signifies no VLAN membership, used for priority tagged frames) */ - IX_ETH_DB_INVALID_PRIORITY, /**< Invalid QoS priority/traffic class (valid range for QoS priority is 0..7, valid range for traffic class depends on run-time configuration) */ - IX_ETH_DB_NO_PERMISSION, /**< No permission for attempted operation */ - IX_ETH_DB_FEATURE_UNAVAILABLE, /**< Feature not available (or not enabled) */ - IX_ETH_DB_INVALID_KEY, /**< Invalid search key */ - IX_ETH_DB_INVALID_RECORD_TYPE /**< Invalid record type */ -} IxEthDBStatus; - -/** @brief VLAN ID type, valid range is 0..4094, 0 signifying no VLAN membership */ -typedef UINT32 IxEthDBVlanId; - -/** @brief 802.1Q VLAN tag, contains 3 bits user priority, 1 bit CFI, 12 bits VLAN ID */ -typedef UINT32 IxEthDBVlanTag; - -/** @brief QoS priority/traffic class type, valid range is 0..7, 0 being the lowest */ -typedef UINT32 IxEthDBPriority; - -/** @brief Priority mapping table; 0..7 QoS priorities used to index, table contains traffic classes */ -typedef UINT8 IxEthDBPriorityTable[8]; - -/** @brief A 4096 bit array used to map the complete VLAN ID range */ -typedef UINT8 IxEthDBVlanSet[512]; - -#define IX_ETH_DB_802_1Q_VLAN_MASK (0xFFF) -#define IX_ETH_DB_802_1Q_QOS_MASK (0x7) - -#define IX_ETH_DB_802_1Q_MAX_VLAN_ID (0xFFE) - -/** - * @def IX_ETH_DB_SET_VLAN_ID - * @brief returns the given 802.1Q tag with the VLAN ID field substituted with the given VLAN ID - * - * This macro is used to change the VLAN ID in a 802.1Q tag. - * - * Example: - * - * tag = IX_ETH_DB_SET_VLAN_ID(tag, 32) - * - * inserts the VLAN ID "32" in the given tag. - */ -#define IX_ETH_DB_SET_VLAN_ID(vlanTag, vlanID) (((vlanTag) & 0xF000) | ((vlanID) & IX_ETH_DB_802_1Q_VLAN_MASK)) - -/** -* @def IX_ETH_DB_GET_VLAN_ID -* @brief returns the VLAN ID from the given 802.1Q tag -*/ -#define IX_ETH_DB_GET_VLAN_ID(vlanTag) ((vlanTag) & IX_ETH_DB_802_1Q_VLAN_MASK) - -#define IX_ETH_DB_GET_QOS_PRIORITY(vlanTag) (((vlanTag) >> 13) & IX_ETH_DB_802_1Q_QOS_MASK) - -#define IX_ETH_DB_SET_QOS_PRIORITY(vlanTag, priority) (((vlanTag) & 0x1FFF) | (((priority) & IX_ETH_DB_802_1Q_QOS_MASK) << 13)) - -#define IX_ETH_DB_CHECK_VLAN_TAG(vlanTag) { if(((vlanTag & 0xFFFF0000) != 0) || (IX_ETH_DB_GET_VLAN_ID(vlanTag) > 4094)) return IX_ETH_DB_INVALID_VLAN; } - -#define IX_ETH_DB_CHECK_VLAN_ID(vlanId) { if (vlanId > IX_ETH_DB_802_1Q_MAX_VLAN_ID) return IX_ETH_DB_INVALID_VLAN; } - -#define IX_IEEE802_1Q_VLAN_TPID (0x8100) - -typedef enum -{ - IX_ETH_DB_UNTAGGED_FRAMES = 0x1, /**< Accepts untagged frames */ - IX_ETH_DB_VLAN_TAGGED_FRAMES = 0x2, /**< Accepts tagged frames */ - IX_ETH_DB_PRIORITY_TAGGED_FRAMES = 0x4, /**< Accepts tagged frames with VLAN ID set to 0 (no VLAN membership) */ - IX_ETH_DB_ACCEPT_ALL_FRAMES = - IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES /**< Accepts all the frames */ -} IxEthDBFrameFilter; - -typedef enum -{ - IX_ETH_DB_PASS_THROUGH = 0x1, /**< Leave frame as-is */ - IX_ETH_DB_ADD_TAG = 0x2, /**< Add default port VLAN tag */ - IX_ETH_DB_REMOVE_TAG = 0x3 /**< Remove VLAN tag from frame */ -} IxEthDBTaggingAction; - -typedef enum -{ - IX_ETH_DB_FIREWALL_WHITE_LIST = 0x1, /**< Firewall operates in white-list mode (MAC address based admission) */ - IX_ETH_DB_FIREWALL_BLACK_LIST = 0x2 /**< Firewall operates in black-list mode (MAC address based blocking) */ -} IxEthDBFirewallMode; - -typedef enum -{ - IX_ETH_DB_FILTERING_RECORD = 0x01, /**< - *
Filtering record
MAC address static/dynamic type age - *
- */ - IX_ETH_DB_FILTERING_VLAN_RECORD = 0x02, /**< - *
VLAN-enabled filtering record
MAC address static/dynamic type age 802.1Q tag - *
- */ - IX_ETH_DB_WIFI_RECORD = 0x04, /**< - *
WiFi header conversion record
MAC address optional gateway MAC address - *
- */ - IX_ETH_DB_FIREWALL_RECORD = 0x08, /**< - *
Firewall record
MAC address - *
- */ - IX_ETH_DB_GATEWAY_RECORD = 0x10, /**< For internal use only */ - IX_ETH_DB_MAX_RECORD_TYPE_INDEX = 0x10, /**< For internal use only */ - IX_ETH_DB_NO_RECORD_TYPE = 0, /**< None of the registered record types */ - IX_ETH_DB_ALL_FILTERING_RECORDS = IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD, /**< All the filtering records */ - IX_ETH_DB_ALL_RECORD_TYPES = IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD | - IX_ETH_DB_WIFI_RECORD | IX_ETH_DB_FIREWALL_RECORD /**< All the record types registered within EthDB */ -} IxEthDBRecordType; - -typedef enum -{ - IX_ETH_DB_LEARNING = 0x01, /**< Learning feature; enables EthDB to learn MAC address (filtering) records, including 802.1Q enabled records */ - IX_ETH_DB_FILTERING = 0x02, /**< Filtering feature; enables EthDB to communicate with the NPEs for downloading filtering information in the NPEs; depends on the learning feature */ - IX_ETH_DB_VLAN_QOS = 0x04, /**< VLAN/QoS feature; enables EthDB to configure NPEs to operate in VLAN/QoS aware modes */ - IX_ETH_DB_FIREWALL = 0x08, /**< Firewall feature; enables EthDB to configure NPEs to operate in firewall mode, using white/black address lists */ - IX_ETH_DB_SPANNING_TREE_PROTOCOL = 0x10, /**< Spanning tree protocol feature; enables EthDB to configure the NPEs as STP nodes */ - IX_ETH_DB_WIFI_HEADER_CONVERSION = 0x20 /**< WiFi 802.3 to 802.11 header conversion feature; enables EthDB to handle WiFi conversion data */ -} IxEthDBFeature; - -typedef UINT32 IxEthDBProperty; /**< Property ID type */ - -typedef enum -{ - IX_ETH_DB_INTEGER_PROPERTY = 0x1, /**< 4 byte unsigned integer type */ - IX_ETH_DB_STRING_PROPERTY = 0x2, /**< NULL-terminated string type of maximum 255 characters (including the terminator) */ - IX_ETH_DB_MAC_ADDR_PROPERTY = 0x3, /**< 6 byte MAC address type */ - IX_ETH_DB_BOOL_PROPERTY = 0x4 /**< 4 byte boolean type; can contain only true and false values */ -} IxEthDBPropertyType; - -/* list of supported properties for the IX_ETH_DB_VLAN_QOS feature */ -#define IX_ETH_DB_QOS_TRAFFIC_CLASS_COUNT_PROPERTY (0x01) /**< Property identifying number the supported number of traffic classes */ -#define IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY (0x10) /**< Rx queue assigned to traffic class 0 */ -#define IX_ETH_DB_QOS_TRAFFIC_CLASS_1_RX_QUEUE_PROPERTY (0x11) /**< Rx queue assigned to traffic class 1 */ -#define IX_ETH_DB_QOS_TRAFFIC_CLASS_2_RX_QUEUE_PROPERTY (0x12) /**< Rx queue assigned to traffic class 2 */ -#define IX_ETH_DB_QOS_TRAFFIC_CLASS_3_RX_QUEUE_PROPERTY (0x13) /**< Rx queue assigned to traffic class 3 */ -#define IX_ETH_DB_QOS_TRAFFIC_CLASS_4_RX_QUEUE_PROPERTY (0x14) /**< Rx queue assigned to traffic class 4 */ -#define IX_ETH_DB_QOS_TRAFFIC_CLASS_5_RX_QUEUE_PROPERTY (0x15) /**< Rx queue assigned to traffic class 5 */ -#define IX_ETH_DB_QOS_TRAFFIC_CLASS_6_RX_QUEUE_PROPERTY (0x16) /**< Rx queue assigned to traffic class 6 */ -#define IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY (0x17) /**< Rx queue assigned to traffic class 7 */ - -/* private property used by EthAcc to indicate queue configuration complete */ -#define IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE (0x18) - -/** - * - * @brief The IEEE 802.3 Ethernet MAC address structure. - * - * The data should be packed with bytes xx:xx:xx:xx:xx:xx - * - * @note The data must be packed in network byte order. - */ -typedef struct -{ - UINT8 macAddress[IX_IEEE803_MAC_ADDRESS_SIZE]; -} IxEthDBMacAddr; - -/** - * @ingroup IxEthDB - * - * @brief Definition of an IXP400 port. - */ -typedef UINT32 IxEthDBPortId; - -/** - * @ingroup IxEthDB - * - * @brief Port dependency map definition - */ -typedef UINT8 IxEthDBPortMap[32]; - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBInit(void) - * - * @brief Initializes the Ethernet learning/filtering database - * - * @note calling this function multiple times does not constitute an error; - * redundant calls will be ignored, returning IX_ETH_DB_SUCCESS - * - * @retval IX_ETH_DB_SUCCESS initialization was successful - * @retval IX_ETH_DB_FAIL initialization failed (OS error) - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBInit(void); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBUnload(void) - * - * @brief Stops and prepares the EthDB component for unloading. - * - * @retval IX_ETH_DB_SUCCESS de-initialization was successful - * @retval IX_ETH_DB_BUSY de-initialization failed, ports must be disabled first - * @retval IX_ETH_DB_FAIL de-initialization failed (OS error) - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBUnload(void); - -/** - * @ingroup IxEthDB - * - * @fn void ixEthDBPortInit(IxEthDBPortId portID) - * - * @brief Initializes a port - * - * This function is called automatically by the Ethernet Access - * ixEthAccPortInit() routine for Ethernet NPE ports and should be manually - * called for any user-defined port (any port that is not one of - * the two Ethernet NPEs). - * - * @param portID @ref IxEthDBPortId [in] - ID of the port to be initialized - * - * @see IxEthDBPortDefs.h for port definitions - * - * @note calling this function multiple times does not constitute an error; - * redundant calls will be ignored - */ -IX_ETH_DB_PUBLIC -void ixEthDBPortInit(IxEthDBPortId portID); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID) - * - * @brief Enables a port - * - * This function is called automatically from the Ethernet Access component - * ixEthAccPortEnable() routine for Ethernet NPE ports and should be manually - * called for any user-defined port (any port that is not one of - * the Ethernet NPEs). - * - * @param portID @ref IxEthDBPortId [in] - ID of the port to enable processing on - * - * @retval IX_ETH_DB_SUCCESS if enabling is successful - * @retval IX_ETH_DB_FAIL if the enabling was not successful due to - * a message handler error - * @retval IX_ETH_DB_MAC_UNINITIALIZED the MAC address of this port was - * not initialized (only for Ethernet NPEs) - * @retval IX_ETH_DB_INVALID_PORT if portID is invalid - * - * @pre ixEthDBPortAddressSet needs to be called prior to enabling the port events - * for Ethernet NPEs - * - * @see ixEthDBPortAddressSet - * - * @see IxEthDBPortDefs.h for port definitions - * - * @note calling this function multiple times does not constitute an error; - * redundant calls will be ignored - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID) - * - * @brief Disables processing on a port - * - * This function is called automatically from the Ethernet Access component - * ixEthAccPortDisable() routine for Ethernet NPE ports and should be manually - * called for any user-defined port (any port that is not one of - * the Ethernet NPEs). - * - * @note Calling ixEthAccPortDisable() will disable the respective Ethernet NPE. - * After Ethernet NPEs are disabled they are stopped therefore - * when re-enabled they need to be reset, downloaded with microcode and started. - * For learning to restart working the user needs to call again - * ixEthAccPortUnicastMacAddressSet or ixEthDBUnicastAddressSet - * with the respective port MAC address. - * Residual MAC addresses learnt before the port was disabled are deleted as soon - * as the port is disabled. This only applies to dynamic (learnt) entries, static - * entries do not dissapear when the port is disabled. - * - * @param portID @ref IxEthDBPortId [in] - ID of the port to disable processing on - * - * @retval IX_ETH_DB_SUCCESS if disabling is successful - * @retval IX_ETH_DB_FAIL if the disabling was not successful due to - * a message handler error - * @retval IX_ETH_DB_INVALID_PORT if portID is invalid - * - * @note calling this function multiple times after the first time completed successfully - * does not constitute an error; redundant calls will be ignored and return IX_ETH_DB_SUCCESS -*/ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) - * - * @brief Sets the port MAC address - * - * This function is to be called from the Ethernet Access component top-level - * ixEthDBUnicastAddressSet(). Event processing cannot be enabled for a port - * until its MAC address has been set. - * - * @param portID @ref IxEthDBPortId [in] - ID of the port whose MAC address is set - * @param macAddr @ref IxEthDBMacAddr [in] - port MAC address - * - * @retval IX_ETH_DB_SUCCESS MAC address was set successfully - * @retval IX_ETH_DB_FAIL MAC address was not set due to a message handler failure - * @retval IX_ETH_DB_INVALID_PORT if the port is not an Ethernet NPE - * - * @see IxEthDBPortDefs.h for port definitions - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFilteringPortMaximumFrameSizeSet(IxEthDBPortId portID, UINT32 maximumFrameSize) - * - * @brief Set the maximum frame size supported on the given port ID - * - * This functions set the maximum frame size supported on a specific port ID - * - * - Reentrant - yes - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - port ID to configure - * @param maximumFrameSize UINT32 [in] - maximum frame size to configure - * - * @retval IX_ETH_DB_SUCCESS the port is configured - * @retval IX_ETH_DB_PORT_UNINITIALIZED the port has not been initialized - * @retval IX_ETH_DB_INVALID_PORT portID is invalid - * @retval IX_ETH_DB_INVALID_ARG size parameter is out of range - * @retval IX_ETH_DB_NO_PERMISSION selected port is not an Ethernet NPE - * @retval IX_FAIL unknown OS or NPE communication error - * - * @note - * This maximum frame size is used to filter the frames based on their - * destination addresses and the capabilities of the destination port. - * The mximum value that can be set for a NPE port is 16320. - * (IX_ETHNPE_ACC_FRAME_LENGTH_MAX) - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringPortMaximumFrameSizeSet(IxEthDBPortId portID, UINT32 maximumFrameSize); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) - * - * @brief Populate the Ethernet learning/filtering database with a static MAC address - * - * Populates the Ethernet learning/filtering database with a static MAC address. The entry will not be subject to aging. - * If there is an entry (static or dynamic) with the corresponding MAC address on any port this entry will take precedence. - * Any other entry with the same MAC address will be removed. - * - * - Reentrant - yes - * - ISR Callable - yes - * - * @param portID @ref IxEthDBPortId [in] - port ID to add the static address to - * @param macAddr @ref IxEthDBMacAddr [in] - static MAC address to add - * - * @retval IX_ETH_DB_SUCCESS the add was successful - * @retval IX_ETH_DB_FAIL failed to populate the database entry - * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later - * @retval IX_ETH_DB_INVALID_PORT portID is invalid - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr pointer argument - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) - * - * @brief Populate the Ethernet learning/filtering database with a dynamic MAC address - * - * Populates the Ethernet learning/filtering database with a dynamic MAC address. This entry will be subject to normal - * aging function, if aging is enabled on its port. - * If there is an entry (static or dynamic) with the same MAC address on any port this entry will take precedence. - * Any other entry with the same MAC address will be removed. - * - * - Reentrant - yes - * - ISR Callable - yes - * - * @param portID @ref IxEthDBPortId [in] - port ID to add the dynamic address to - * @param macAddr @ref IxEthDBMacAddr [in] - static MAC address to add - * - * @retval IX_ETH_DB_SUCCESS the add was successful - * @retval IX_ETH_DB_FAIL failed to populate the database entry - * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later - * @retval IX_ETH_DB_INVALID_PORT portID is invalid - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr pointer argument - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFilteringEntryDelete(IxEthDBMacAddr *macAddr) - * - * @brief Removes a MAC address entry from the Ethernet learning/filtering database - * - * @param macAddr IxEthDBMacAddr [in] - MAC address to remove - * - * - Reentrant - yes - * - ISR Callable - no - * - * @retval IX_ETH_DB_SUCCESS the removal was successful - * @retval IX_ETH_DB_NO_SUCH_ADDR failed to remove the address (not in the database) - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr pointer argument - * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringEntryDelete(IxEthDBMacAddr *macAddr); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFilteringPortSearch(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) - * - * @brief Search the Ethernet learning/filtering database for the given MAC address and port ID - * - * This functions searches the database for a specific port ID and MAC address. Both the port ID - * and the MAC address have to match in order for the record to be reported as found. - * - * - Reentrant - yes - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - port ID to search for - * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to search for - * - * @retval IX_ETH_DB_SUCCESS the record exists in the database - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr pointer argument - * @retval IX_ETH_DB_NO_SUCH_ADDR the record was not found in the database - * @retval IX_ETH_DB_INVALID_PORT portID is invalid - * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringPortSearch(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFilteringDatabaseSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr) - * - * @brief Search the Ethernet learning/filtering database for a MAC address and return the port ID - * - * Searches the database for a MAC address. The function returns the portID for the - * MAC address record, if found. If no match is found the function returns IX_ETH_DB_NO_SUCH_ADDR. - * The portID is only valid if the function finds a match. - * - * - Reentrant - yes - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - port ID the address belongs to (populated only on a successful search) - * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to search for - * - * @retval IX_ETH_DB_SUCCESS the record exists in the database - * @retval IX_ETH_DB_NO_SUCH_ADDR the record was not found in the database - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr or portID pointer argument(s) - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringDatabaseSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFilteringPortUpdatingSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr) - * - * @brief Search the filtering database for a MAC address, return the port ID and reset the record age - * - * Searches the database for a MAC address. The function returns the portID for the - * MAC address record and resets the entry age to 0, if found. - * If no match is found the function returns IX_ETH_DB_NO_SUCH_ADDR. - * The portID is only valid if the function finds a match. - * - * - Reentrant - yes - * - ISR Callable - no - * - * @retval IX_ETH_DB_SUCCESS the MAC address was found - * @retval IX_ETH_DB_NO_SUCH_ADDR the MAC address was not found - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr or portID pointer argument(s) - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringPortUpdatingSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr); - -/** - * @ingroup IxEthDB - * - * @def IX_ETH_DB_MAINTENANCE_TIME - * - * @brief The @ref ixEthDBDatabaseMaintenance must be called by the user at a frequency of - * IX_ETH_DB_MAINTENANCE_TIME - * - */ -#define IX_ETH_DB_MAINTENANCE_TIME (1 * 60) /* 1 Minute */ - -/** - * @ingroup IxEthDB - * - * @def IX_ETH_DB_LEARNING_ENTRY_AGE_TIME - * - * @brief The define specifies the filtering database age entry time. Static entries older than - * IX_ETH_DB_LEARNING_ENTRY_AGE_TIME +/- IX_ETH_DB_MAINTENANCE_TIME shall be removed. - * - */ -#define IX_ETH_DB_LEARNING_ENTRY_AGE_TIME (15 * 60 ) /* 15 Mins */ - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID) - * - * @brief Disable the aging function for a specific port - * - * @param portID @ref IxEthDBPortId [in] - port ID to disable aging on - * - * - Reentrant - yes - * - ISR Callable - no - * - * @retval IX_ETH_DB_SUCCESS aging disabled successfully - * @retval IX_ETH_DB_INVALID_PORT portID is invalid - * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID) - * - * @brief Enable the aging function for a specific port - * - * Enables the aging of dynamic MAC address entries stored in the learning/filtering database - * - * @note The aging function relies on the @ref ixEthDBDatabaseMaintenance being called with a period of - * @ref IX_ETH_DB_MAINTENANCE_TIME seconds. - * - * - Reentrant - yes - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - port ID to enable aging on - * - * @retval IX_ETH_DB_SUCCESS aging enabled successfully - * @retval IX_ETH_DB_INVALID_PORT portID is invalid - * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID); - -/** - * @ingroup IxEthDB - * - * @fn void ixEthDBDatabaseMaintenance(void) - * - * @brief Performs a maintenance operation on the Ethernet learning/filtering database - * - * In order to perform a database maintenance this function must be called every - * @ref IX_ETH_DB_MAINTENANCE_TIME seconds. It should be called regardless of whether learning is - * enabled or not. - * - * - Reentrant - no - * - ISR Callable - no - * - * @note this function call will be ignored if the learning feature is disabled - */ -IX_ETH_DB_PUBLIC -void ixEthDBDatabaseMaintenance(void); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFilteringDatabaseShow(IxEthDBPortId portID) - * - * @brief This function displays the Mac Ethernet MAC address filtering tables. - * - * It displays the MAC address, port ID, entry type (dynamic/static),and age for - * the given port ID. - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - port ID to display the MAC address entries - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is invalid - * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized - * @retval IX_ETH_DB_FAIL record browser failed due to an internal busy or lock condition - * - * @note this function is deprecated and kept for compatibility reasons; use @ref ixEthDBFilteringDatabaseShowRecords instead - * - * @see ixEthDBFilteringDatabaseShowRecords - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringDatabaseShow(IxEthDBPortId portID); - -/** - * @ingroup IxEthDB - * - * @fn void ixEthDBFilteringDatabaseShowAll(void) - * - * @brief Displays the MAC address recorded in the filtering database for all registered - * ports (see IxEthDBPortDefs.h), grouped by port ID. - * - * - Reentrant - no - * - ISR Callable - no - * - * @retval void - * - * @note this function is deprecated and kept for compatibility reasons; use @ref ixEthDBFilteringDatabaseShowRecords instead - * - * @see ixEthDBFilteringDatabaseShowRecords - */ -IX_ETH_DB_PUBLIC -void ixEthDBFilteringDatabaseShowAll(void); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBRecordType recordFilter) - * - * @brief This function displays per port database records, given a record type filter - * - * The supported record type filters are: - * - * - IX_ETH_DB_FILTERING_RECORD - displays the non-VLAN filtering records (MAC address, age, static/dynamic) - * - IX_ETH_DB_FILTERING_VLAN_RECORD - displays the VLAN filtering records (MAC address, age, static/dynamic, VLAN ID, CFI, QoS class) - * - IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD - displays the previous two types of records - * - IX_ETH_DB_WIFI_RECORD - displays the WiFi header conversion records (MAC address, optional gateway MAC address) and WiFi header conversion parameters (BBSID, Duration/ID) - * - IX_ETH_DB_FIREWALL_RECORD - displays the firewall MAC address table and firewall operating mode (white list/black list) - * - IX_ETH_DB_ALL_RECORD_TYPES - displays all the record types - * - IX_ETH_DB_NO_RECORD_TYPE - displays only the port status (no records are displayed) - * - * Additionally, the status of each port will be displayed, containg the following information: type, capabilities, enabled status, - * aging enabled status, group membership and maximum frame size. - * - * The port ID can either be an actual port or IX_ETH_DB_ALL_PORTS, in which case the requested information - * will be displayed for all the ports (grouped by port) - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID ID of the port to display information on (use IX_ETH_DB_ALL_PORTS for all the ports) - * @param recordFilter record type filter - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is invalid - * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBRecordType recordFilter); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortDependencyMapSet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap) - * - * @brief Sets the dependency port map for a port - * - * @param portID ID of the port to set the dependency map to - * @param dependencyPortMap new dependency map (as bitmap, each bit set indicates a port being included) - * - * This function is used to share filtering information between ports. - * By adding a port into another port's dependency map the target port - * filtering data will import the filtering data from the port it depends on. - * Any changes to filtering data for a port - such as adding, updating or removing records - - * will trigger updates in the filtering information for all the ports depending on - * on the updated port. - * - * For example, if ports 2 and 3 are set in the port 0 dependency map the filtering - * information for port 0 will also include the filtering information from ports 2 and 3. - * Adding a record to port 2 will also trigger an update not only on port 2 but also on - * port 0. - * - * The dependency map is a 256 bit array where each bit corresponds to a port corresponding to the - * bit offset (bit 0 - port 0, bit 1 - port 1 etc). Setting a bit to 1 indicates that the corresponding - * port is the port map. For example, a dependency port map of 0x14 consists in the ports with IDs 2 and 4. - * Note that the last bit (offset 255) is reserved and should never be set (it will be automatically - * cleared by the function). - * - * By default, each port has a dependency port map consisting only of itself, i.e. - * - * @verbatim - IxEthDBPortMap portMap; - - // clear all ports from port map - memset(portMap, 0, sizeof (portMap)); - - // include portID in port map - portMap[portID / 8] = 1 << (portID % 8); - @endverbatim - * - * - Reentrant - no - * - ISR Callable - no - * - * @note Setting dependency maps is useful for NPE ports, which benefit from automatic updates - * of filtering information. Setting dependency maps for user-defined ports is not an error - * but will have no actual effect. - * - * @note Including a port in its own dependency map is not compulsory, however note that - * in this case updating the port will not trigger an update on the port itself, which - * might not be the intended behavior - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid dependencyPortMap pointer - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Filtering is not available or not enabled for the port - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortDependencyMapSet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortDependencyMapGet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap) - * - * @brief Retrieves the dependency port map for a port - * - * @param portID ID of the port to set the dependency map to - * @param dependencyPortMap location where the port dependency map is to be copied - * - * This function will copy the port dependency map to a user specified location. - * - * - Reentrant - no - * - ISR Callable - no - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid dependencyPortMap pointer - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Filtering is not available or not enabled for the port - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortDependencyMapGet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortVlanTagSet(IxEthDBPortId portID, IxEthDBVlanTag vlanTag) - * - * @brief Sets the default 802.1Q VLAN tag for a given port - * - * @param portID @ref IxEthDBPortId [in] - ID of the port to set the default VLAN tag to - * @param vlanTag @ref IxEthDBVlanTag [in] - default 802.1Q VLAN tag - * - * The tag format has 16 bits and it is defined in the IEEE802.1Q specification. - * This tag will be used for tagging untagged frames (if enabled) and classifying - * unexpedited traffic into an internal traffic class (using the user priority field). - * - * - *
802.1Q tag format
3 bits 1 bit 12 bits - *
user priority CFI VID - *
- * - * User Priority : Defines user priority, giving eight (2^3) priority levels. IEEE 802.1P defines - * the operation for these 3 user priority bits - * - * CFI : Canonical Format Indicator is always set to zero for Ethernet switches. CFI is used for - * compatibility reason between Ethernet type network and Token Ring type network. If a frame received - * at an Ethernet port has a CFI set to 1, then that frame should not be forwarded as it is to an untagged port. - * - * VID : VLAN ID is the identification of the VLAN, which is basically used by the standard 802.1Q. - * It has 12 bits and allow the id entification of 4096 (2^12) VLANs. Of the 4096 possible VIDs, a VID of 0 - * is used to identify priority frames and value 4095 (FFF) is reserved, so the maximum possible VLAN - * configurations are 4,094. - * - * - Reentrant - no - * - ISR Callable - no - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_ETH_DB_INVALID_VLAN vlanTag argument does not parse to a valid 802.1Q VLAN tag - * - * @note a VLAN ID value of 0 indicates that the port is not part of any VLAN - * @note the value of the cannonical frame indicator (CFI) field is ignored, the - * field being used only in frame tagging operations - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanTagSet(IxEthDBPortId portID, IxEthDBVlanTag vlanTag); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortVlanTagGet(IxEthDBPortId portID, IxEthDBVlanTag *vlanTag) - * - * @brief Retrieves the default 802.1Q port VLAN tag for a given port (see also @ref ixEthDBPortVlanTagSet) - * - * @param portID @ref IxEthDBPortId [in] - ID of the port to retrieve the default VLAN tag from - * @param vlanTag @ref IxEthDBVlanTag [out] - location to write the default port 802.1Q VLAN tag to - * - * - Reentrant - no - * - ISR Callable - no - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid vlanTag pointer - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanTagGet(IxEthDBPortId portID, IxEthDBVlanTag *vlanTag); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBVlanTagSet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag vlanTag) - * - * @brief Sets the 802.1Q VLAN tag for a database record - * - * @param macAddr MAC address - * @param vlanTag 802.1Q VLAN tag - * - * This function is used together with @ref ixEthDBVlanTagGet to provide MAC-based VLAN classification support. - * Please note that the bridging application must contain specific code to make use of this feature (see below). - * - * VLAN tags can be set only in IX_ETH_DB_FILTERING_RECORD or IX_ETH_DB_FILTERING_VLAN_RECORD type records. - * If to an IX_ETH_DB_FILTERING_RECORD type record is added a VLAN tag the record type is automatically - * changed to IX_ETH_DB_FILTERING_VLAN_RECORD. Once this has occurred the record type will never - * revert to a non-VLAN type (unless deleted and re-added). - * - * Record types used for different purposes (such as IX_ETH_DB_WIFI_RECORD) will be ignored by - * this function. - * - * After using this function to associate a VLAN ID with a MAC address the VLAN ID can be extracted knowing the - * MAC address using @ref ixEthDBVlanTagGet. This mechanism can be used to implement MAC-based VLAN classification - * if a bridging application searches for the VLAN tag when receiving a frame based on the source MAC address - * (contained in the ixp_ne_src_mac field of the buffer header). - * If found in the database, the application can instruct the NPE to tag the frame by writing the VLAN tag - * in the ixp_ne_vlan_tci field of the buffer header. This way the NPE will inspect the Egress tagging - * rule associated with the given VLAN ID on the Tx port and tag the frame if Egress tagging on the VLAN is - * allowed. Additionally, Egress tagging can be forced by setting the ixp_ne_tx_flags.tag_over and - * ixp_ne_tx_flags.tag_mode flags in the buffer header. - * - * - Reentrant - no - * - ISR Callable - no - * - * @note this function will not add a filtering record, it can only be used to update an existing one - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr pointer - * @retval IX_ETH_DB_NO_SUCH_ADDR a filtering record with the specified MAC address was not found - * @retval IX_ETH_DB_INVALID_VLAN vlanTag argument does not parse to a valid 802.1Q VLAN tag - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBVlanTagSet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag vlanTag); - -/** - * @ingroup IxEthDB - * - * @fn ixEthDBVlanTagGet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag *vlanTag) - * - * @brief Retrieves the 802.1Q VLAN tag from a database record given the record MAC address - * - * @param macAddr MAC address - * @param vlanTag location to write the record 802.1Q VLAN tag to - * - * @note VLAN tags can be retrieved only from IX_ETH_DB_FILTERING_VLAN_RECORD type records - * - * This function is used together with ixEthDBVlanTagSet to provide MAC-based VLAN classification support. - * Please note that the bridging application must contain specific code to make use of this feature (see @ref ixEthDBVlanTagSet). - * - * - Reentrant - no - * - ISR Callable - no - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr or vlanTag pointer - * @retval IX_ETH_DB_NO_SUCH_ADDR a filtering record with the specified MAC address was not found - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBVlanTagGet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag *vlanTag); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortVlanMembershipAdd(IxEthDBPortId portID, IxEthDBVlanId vlanID) - * - * @brief Adds a VLAN ID to a port's VLAN membership table - * - * Adding a VLAN ID to a port's VLAN membership table will cause frames tagged with the specified - * VLAN ID to be accepted by the frame filter, if Ingress VLAN membership filtering is enabled. - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - ID of the port to add the VLAN ID membership to - * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be added to the port membership table - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_VLAN vlanID is not a valid VLAN ID - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_FAIL unknown OS or NPE communication error - * - * @note A port's default VLAN ID is always in its own membership table, hence there - * is no need to explicitly add it using this function (although it is not an error - * to do so) - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipAdd(IxEthDBPortId portID, IxEthDBVlanId vlanID); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortVlanMembershipRangeAdd(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax) - * - * @brief Adds a VLAN ID range to a port's VLAN membership table - * - * All the VLAN IDs in the specified range will be added to the port VLAN - * membership table, including the range start and end VLAN IDs. Tagged frames with - * VLAN IDs in the specified range will be accepted by the frame filter, if Ingress VLAN - * membership filtering is enabled. - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - port ID to add the VLAN membership range into - * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN ID range - * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN ID range - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_VLAN the specified VLAN IDs are invalid or do not constitute a range - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_FAIL unknown OS or NPE communication error - * - * @note Is is valid to use the same VLAN ID for both vlanIDMin and vlanIDMax, in which case this - * function will behave as @ref ixEthDBPortVlanMembershipAdd - * - * @note A port's default VLAN ID is always in its own membership table, hence there is no need - * to explicitly add it using this function (although it is not an error to do so) - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipRangeAdd(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortVlanMembershipRemove(IxEthDBPortId portID, IxEthDBVlanId vlanID) - * - * @brief Removes a VLAN ID from a port's VLAN membership table - * - * Frames tagged with a VLAN ID which is not in a port's VLAN membership table - * will be discarded by the frame filter, if Ingress membership filtering is enabled. - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - ID of the port to remove the VLAN ID membership from - * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be removed from the port membership table - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_INVALID_VLAN vlanID is not a valid VLAN ID - * @retval IX_ETH_DB_NO_PERMISSION attempted to remove the default VLAN ID - * from the port membership table (vlanID was set to the default port VLAN ID) - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_FAIL unknown OS or NPE communication error - * - * @note A port's default VLAN ID cannot be removed from the port's membership - * table; attempting it will return IX_ETH_DB_NO_PERMISSION - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipRemove(IxEthDBPortId portID, IxEthDBVlanId vlanID); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortVlanMembershipRangeRemove(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax) - * - * @brief Removes a VLAN ID range from a port's VLAN membership table - * - * All the VLAN IDs in the specified range will be removed from the port VLAN - * membership table, including the range start and end VLAN IDs. Tagged frames - * with VLAN IDs in the range will be discarded by the frame filter, if Ingress - * membership filtering is enabled. - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - ID of the port to remove the VLAN membership range from - * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN ID range - * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN ID range - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_VLAN the specified VLAN IDs are invalid or do not constitute a range - * @retval IX_ETH_DB_NO_PERMISSION attempted to remove the default VLAN ID - * from the port membership table (both vlanIDMin and vlanIDMax were set to the default port VLAN ID) - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_FAIL unknown OS or NPE communication error - * - * @note Is is valid to use the same VLAN ID for both vlanIDMin and vlanIDMax, in which case - * function will behave as @ref ixEthDBPortVlanMembershipRemove - * - * @note If the given range overlaps the default port VLAN ID this function - * will remove all the VLAN IDs in the range except for the port VLAN ID from its - * own membership table. This situation will be silently dealt with (no error message - * will be returned) as long as the range contains more than one value (i.e. at least - * one other value, apart from the default port VLAN ID). If the function is called - * with the vlanIDMin and vlanIDMax parameters both set to the port default VLAN ID, the - * function will infer that an attempt was specifically made to remove the default port - * VLAN ID from the port membership table, in which case the return value will be - * IX_ETH_DB_NO_PERMISSION. - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipRangeRemove(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortVlanMembershipSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) - * - * @brief Sets a port's VLAN membership table - * - * Sets a port's VLAN membership table from a complete VLAN table containing all the possible - * 4096 VLAN IDs. The table format is an array containing 4096 bits (512 bytes), where each bit - * indicates whether the VLAN at that bit index is in the port's membership list (if set) or - * not (unset). - * - * The bit at index 0, indicating VLAN ID 0, indicates no VLAN membership and therefore no - * other bit must be set if bit 0 is set. - * - * The bit at index 4095 is reserved and should never be set (it will be ignored if set). - * - * The bit referencing the same VLAN ID as the default port VLAN ID should always be set, as - * the membership list must contain at least the default port VLAN ID. - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - port ID to set the VLAN membership table to - * @param vlanSet @ref IxEthDBVlanSet [in] - pointer to the VLAN membership table - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid vlanSet pointer - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) - * - * @brief Retrieves a port's VLAN membership table - * - * Retrieves the complete VLAN membership table from a port, containing all the possible - * 4096 VLAN IDs. The table format is an array containing 4096 bits (512 bytes), where each bit - * indicates whether the VLAN at that bit index is in the port's membership list (if set) or - * not (unset). - * - * The bit at index 0, indicating VLAN ID 0, indicates no VLAN membership and therefore no - * other bit will be set if bit 0 is set. - * - * The bit at index 4095 is reserved and will not be set (it will be ignored if set). - * - * The bit referencing the same VLAN ID as the default port VLAN ID will always be set, as - * the membership list must contain at least the default port VLAN ID. - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - port ID to retrieve the VLAN membership table from - * @param vlanSet @ref IxEthDBVlanSet [out] - pointer a location where the VLAN membership table will be - * written to - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid vlanSet pointer - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBAcceptableFrameTypeSet(IxEthDBPortId portID, IxEthDBFrameFilter frameFilter) - * - * @brief Sets a port's acceptable frame type filter - * - * The acceptable frame type is one (or a combination) of the following values: - * - IX_ETH_DB_ACCEPT_ALL_FRAMES - accepts all the frames - * - IX_ETH_DB_UNTAGGED_FRAMES - accepts untagged frames - * - IX_ETH_DB_VLAN_TAGGED_FRAMES - accepts tagged frames - * - IX_ETH_DB_PRIORITY_TAGGED_FRAMES - accepts tagged frames with VLAN ID set to 0 (no VLAN membership) - * - * Except for using the exact values given above only the following combinations are valid: - * - IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES - * - IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_PRIORITY_TAGGED_FRAMES - * - * Please note that IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES is equivalent - * to IX_ETH_DB_ACCEPT_ALL_FRAMES. - * - * - Reentrant - no - * - ISR Callable - no - * - * @note by default the acceptable frame type filter is set to IX_ETH_DB_ACCEPT_ALL_FRAMES - * - * @note setting the acceptable frame type to PRIORITY_TAGGED_FRAMES is internally - * accomplished by changing the frame filter to VLAN_TAGGED_FRAMES and setting the - * VLAN membership list to include only VLAN ID 0; the membership list will need - * to be restored manually to an appropriate value if the acceptable frame type - * filter is changed back to ACCEPT_ALL_FRAMES or VLAN_TAGGED_FRAMES; failure to do so - * will filter all VLAN traffic bar frames tagged with VLAN ID 0 - * - * @param portID @ref IxEthDBPortId [in] - port ID to set the acceptable frame type filter to - * @param frameFilter @ref IxEthDBFrameFilter [in] - acceptable frame type filter - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid frame type filter - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBAcceptableFrameTypeSet(IxEthDBPortId portID, IxEthDBFrameFilter frameFilter); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBAcceptableFrameTypeGet(IxEthDBPortId portID, IxEthDBFrameFilter *frameFilter) - * - * @brief Retrieves a port's acceptable frame type filter - * - * For a description of the acceptable frame types see @ref ixEthDBAcceptableFrameTypeSet - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - port ID to retrieve the acceptable frame type filter from - * @param frameFilter @ref IxEthDBFrameFilter [out] - location to store the acceptable frame type filter - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid frameFilter pointer argument - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBAcceptableFrameTypeGet(IxEthDBPortId portID, IxEthDBFrameFilter *frameFilter); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPriorityMappingTableSet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable) - * - * @brief Sets a port's priority mapping table - * - * The priority mapping table is an 8x2 table mapping a QoS (user) priority into an internal - * traffic class. There are 8 valid QoS priorities (0..7, 0 being the lowest) which can be - * mapped into one of the 4 available traffic classes (0..3, 0 being the lowest). - * If a custom priority mapping table is not specified using this function the following - * default priority table will be used (as per IEEE 802.1Q and IEEE 802.1D): - * - * - *
QoS traffic classes
QoS priority Default traffic class Traffic type - *
0 1 Best effort, default class for unexpedited traffic - *
1 0 Background traffic - *
2 0 Spare bandwidth - *
3 1 Excellent effort - *
4 2 Controlled load - *
5 2 Video traffic - *
6 3 Voice traffic - *
7 3 Network control - *
- * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - port ID of the port to set the priority mapping table to - * @param priorityTable @ref IxEthDBPriorityTable [in] - location of the user priority table - * - * @note The provided table will be copied into internal data structures in EthDB and - * can be deallocated by the called after this function has completed its execution, if - * so desired - * - * @warning The number of available traffic classes differs depending on the NPE images - * and queue configuration. Check IxEthDBQoS.h for up-to-date information on the availability of - * traffic classes. Note that specifiying a traffic class in the priority map which exceeds - * the system availability will produce an IX_ETH_DB_INVALID_PRIORITY return error code and no - * priority will be remapped. - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid priorityTable pointer - * @retval IX_ETH_DB_INVALID_PRIORITY at least one priority value exceeds - * the current number of available traffic classes - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPriorityMappingTableSet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPriorityMappingTableGet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable) - * - * @brief Retrieves a port's priority mapping table - * - * The priority mapping table for the given port will be copied in the location - * specified by the caller using "priorityTable" - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID ID @ref IxEthDBPortId [in] - of the port to retrieve the priority mapping table from - * @param priorityTable @ref IxEthDBPriorityTable [out] - pointer to a user specified location where the table will be copied to - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid priorityTable pointer - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPriorityMappingTableGet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPriorityMappingClassSet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority trafficClass) - * - * @brief Sets one QoS/user priority => traffic class mapping in a port's priority mapping table - * - * This function establishes a mapping between a user (QoS) priority and an internal traffic class. - * The mapping will be saved in the port's priority mapping table. Use this function when not all - * the QoS priorities need remapping (see also @ref ixEthDBPriorityMappingTableSet) - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - ID of the port to set the mapping to - * @param userPriority @ref IxEthDBPriority [in] - user (QoS) priority, between 0 and 7 (0 being the lowest) - * @param trafficClass @ref IxEthDBPriority [in] - internal traffic class, between 0 and 3 (0 being the lowest) - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_PRIORITY userPriority out of range or - * trafficClass is beyond the number of currently available traffic classes - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPriorityMappingClassSet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority trafficClass); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority *trafficClass) - * - * @brief Retrieves one QoS/user priority => traffic class mapping in a port's priority mapping table - * - * This function retrieves the internal traffic class associated with a QoS (user) priority from a given - * port's priority mapping table. Use this function when not all the QoS priority mappings are - * required (see also @ref ixEthDBPriorityMappingTableGet) - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - ID of the port to set the mapping to - * @param userPriority @ref IxEthDBPriority [in] - user (QoS) priority, between 0 and 7 (0 being the lowest) - * @param trafficClass @ref IxEthDBPriority [out] - location to write the corresponding internal traffic class to - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_PRIORITY invalid userPriority value (out of range) - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_ETH_DB_INVALID_ARG invalid trafficClass pointer argument - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority *trafficClass); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL enabled) - * - * @brief Enables or disables Egress VLAN tagging for a port and a given VLAN - * - * This function enables or disables Egress VLAN tagging for the given port and VLAN ID. - * If the VLAN tagging for a certain VLAN ID is enabled then all the frames to be - * transmitted on the given port tagged with the same VLAN ID will be transmitted in a tagged format. - * If tagging is not enabled for the given VLAN ID, the VLAN tag from the frames matching - * this VLAN ID will be removed (the frames will be untagged). - * - * VLAN ID 4095 is reserved and should never be used with this function. - * VLAN ID 0 has the special meaning of "No VLAN membership" and it is used in this - * context to allow the port to send priority-tagged frames or not. - * - * By default, no Egress VLAN tagging is enabled on any port. - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the VLAN ID Egress tagging on - * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be matched against outgoing frames - * @param enabled BOOL [in] - true to enable Egress VLAN tagging on the port and given VLAN, and - * false to disable Egress VLAN tagging - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range) - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL enabled); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL *enabled) - * - * @brief Retrieves the Egress VLAN tagging enabling status for a port and VLAN ID - * - * @param portID [in] - ID of the port to extract the Egress VLAN ID tagging status from - * @param vlanID VLAN [in] - ID whose tagging status is to be extracted - * @param enabled [in] - user-specifed location where the status is copied to; following - * the successfull execution of this function the value will be true if Egress VLAN - * tagging is enabled for the given port and VLAN ID, and false otherwise - * - * - Reentrant - no - * - ISR Callable - no - * - * @see ixEthDBEgressVlanEntryTaggingEnabledGet - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range) - * @retval IX_ETH_DB_INVALID_ARG invalid enabled argument pointer - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL *enabled); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBEgressVlanRangeTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, BOOL enabled) - * - * @brief Enables or disables Egress VLAN tagging for a port and given VLAN range - * - * This function is very similar to @ref ixEthDBEgressVlanEntryTaggingEnabledSet with the - * difference that it can manipulate the Egress tagging status on multiple VLAN IDs, - * defined by a contiguous range. Note that both limits in the range are explicitly - * included in the execution of this function. - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the VLAN ID Egress tagging on - * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN range to be matched against outgoing frames - * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN range to be matched against outgoing frames - * @param enabled BOOL [in] - true to enable Egress VLAN tagging on the port and given VLAN range, - * and false to disable Egress VLAN tagging - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range), or do not constitute a range - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_ETH_DB_NO_PERMISSION attempted to explicitly remove the default port VLAN ID from the tagging table - * @retval IX_FAIL unknown OS or NPE communication error - * - * @note Specifically removing the default port VLAN ID from the Egress tagging table by setting both vlanIDMin and vlanIDMax - * to the VLAN ID portion of the PVID is not allowed by this function and will return IX_ETH_DB_NO_PERMISSION. - * However, this can be circumvented, should the user specifically desire this, by either using a - * larger range (vlanIDMin < vlanIDMax) or by using ixEthDBEgressVlanEntryTaggingEnabledSet. - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanRangeTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, BOOL enabled); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBEgressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) - * - * @brief Sets the complete Egress VLAN tagging table for a port - * - * This function is used to set the VLAN tagging/untagging per VLAN ID for a given port - * covering the entire VLAN ID range (0..4094). The vlanSet parameter is a 4096 - * bit array, each bit indicating the Egress behavior for the corresponding VLAN ID. - * If a bit is set then outgoing frames with the corresponding VLAN ID will be transmitted - * with the VLAN tag, otherwise the frame will be transmitted without the VLAN tag. - * - * Bit 0 has a special significance, indicating tagging or tag removal for priority-tagged - * frames. - * - * Bit 4095 is reserved and should never be set (it will be ignored if set). - * - * - Reentrant - no - * - ISR Callable - no - * - * @param portID @ref IxEthDBPortId [in] - ID of the port whose Egress VLAN tagging behavior is set - * @param vlanSet @ref IxEthDBVlanSet [in] - 4096 bit array controlling per-VLAN tagging and untagging - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid vlanSet pointer - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_FAIL unknown OS or NPE communication error - * - * @warning This function will automatically add the default port VLAN ID to the Egress tagging table - * every time it is called. The user should manually call ixEthDBEgressVlanEntryTaggingEnabledSet to - * prevent tagging on the default port VLAN ID if the default behavior is not intended. - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBEgressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) - * - * @brief Retrieves the complete Egress VLAN tagging table from a port - * - * This function copies the 4096 bit table controlling the Egress VLAN tagging into a user specified - * area. Each bit in the array indicates whether tagging for the corresponding VLAN (the bit position - * in the array) is enabled (the bit is set) or not (the bit is unset). - * - * Bit 4095 is reserved and should not be set (it will be ignored if set). - * - * @see ixEthDBEgressVlanTaggingEnabledSet - * - * @param portID @ref IxEthDBPortId [in] - ID of the port whose Egress VLAN tagging behavior is retrieved - * @param vlanSet @ref IxEthDBVlanSet [out] - user location to copy the Egress tagging table into; should have - * room to store 4096 bits (512 bytes) - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid vlanSet pointer - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBIngressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBTaggingAction taggingAction) - * - * @brief Sets the Ingress VLAN tagging behavior for a port - * - * A port's Ingress tagging behavior is controlled by the taggingAction parameter, - * which can take one of the following values: - * - * - IX_ETH_DB_PASS_THROUGH - leaves the frame unchanged (does not add or remove the VLAN tag) - * - IX_ETH_DB_ADD_TAG - adds the VLAN tag if not present, using the default port VID - * - IX_ETH_DB_REMOVE_TAG - removes the VLAN tag if present - * - * @param portID @ref IxEthDBPortId [in] - ID of the port whose Ingress VLAN tagging behavior is set - * @param taggingAction @ref IxEthDBTaggingAction [in] - tagging behavior for the port - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid taggingAction argument - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBIngressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBTaggingAction taggingAction); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBTaggingAction *taggingAction) - * - * @brief Retrieves the Ingress VLAN tagging behavior from a port (see @ref ixEthDBIngressVlanTaggingEnabledSet) - * - * @param portID @ref IxEthDBPortId [in] - ID of the port whose Ingress VLAN tagging behavior is set - * @param taggingAction @ref IxEthDBTaggingAction [out] - location where the tagging behavior for the port is written to - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid taggingAction pointer argument - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBTaggingAction *taggingAction); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBVlanPortExtractionEnable(IxEthDBPortId portID, BOOL enable) - * - * @brief Enables or disables port ID extraction - * - * This feature can be used in the situation when a multi-port device (e.g. a switch) - * is connected to an IXP4xx port and the device can provide incoming frame port - * identification by tagging the TPID field in the Ethernet frame. Enabling - * port extraction will instruct the NPE to copy the TPID field from the frame and - * place it in the ixp_ne_src_port of the ixp_buf header. In addition, - * the NPE restores the TPID field to 0. - * - * If the frame is not tagged the NPE will fill the ixp_ne_src_port with the - * port ID of the MII interface the frame was received from. - * - * The TPID field is the least significant byte of the type/length field, which is - * normally set to 0x8100 for 802.1Q-tagged frames. - * - * This feature is disabled by default. - * - * @param portID ID of the port to configure port ID extraction on - * @param enable true to enable port ID extraction and false to disable it - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port - * @retval IX_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBVlanPortExtractionEnable(IxEthDBPortId portID, BOOL enable); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature *featureSet) - * - * @brief Retrieves the feature capability set for a port - * - * This function retrieves the feature capability set for a port or the common capabilities shared between all - * the ports, writing the feature capability set in a user specified location. - * - * The feature capability set will consist of a set formed by OR-ing one or more of the following values: - * - IX_ETH_DB_LEARNING - Learning feature; enables EthDB to learn MAC address (filtering) records, including 802.1Q enabled records - * - IX_ETH_DB_FILTERING - Filtering feature; enables EthDB to communicate with the NPEs for downloading filtering information in the NPEs; depends on the learning feature - * - IX_ETH_DB_VLAN_QOS - VLAN/QoS feature; enables EthDB to configure NPEs to operate in VLAN/QoS aware modes - * - IX_ETH_DB_FIREWALL - Firewall feature; enables EthDB to configure NPEs to operate in firewall mode, using white/black address lists - * - IX_ETH_DB_SPANNING_TREE_PROTOCOL - Spanning tree protocol feature; enables EthDB to configure the NPEs as STP nodes - * - IX_ETH_DB_WIFI_HEADER_CONVERSION - WiFi 802.3 to 802.11 header conversion feature; enables EthDB to handle WiFi conversion data - * - * Note that EthDB provides only the LEARNING feature for non-NPE ports. - * - * @param portID @ref IxEthDBPortId [in] - ID of the port to retrieve the capability set for - * (use IX_ETH_DB_ALL_PORTS to retrieve the common capabilities shared between all the ports) - * @param featureSet @ref IxEthDBFeature [out] - location where the capability set will be written to - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid featureSet pointer - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature *featureSet); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, BOOL enabled) - * - * @brief Enables or disables one or more EthDB features - * - * Selects one or more features (see @ref ixEthDBFeatureCapabilityGet for a description of the supported - * features) to be enabled or disabled on the selected port (or all the ports). - * - * Note that some features are mutually incompatible: - * - IX_ETH_DB_FILTERING is incompatible with IX_ETH_DB_WIFI_HEADER_CONVERSION - * - * Also note that some features require other features to be enabled: - * - IX_ETH_DB_FILTERING requires IX_ETH_DB_LEARNING - * - * This function will either enable the entire selected feature set for the selected port (or all the ports), - * in which case it will return IX_ETH_DB_SUCCESS, or in case of error it will not enable any feature at all - * and return an appropriate error message. - * - * The following features are enabled by default (for ports with the respective capability), - * for compatibility reasons with previous versions of CSR: - * - IX_ETH_DB_LEARNING - * - IX_ETH_DB_FILTERING - * - * All other features are disabled by default and require manual enabling using ixEthDBFeatureEnable. - * - * Default settings for VLAN, QoS, Firewall and WiFi header conversion features: - * - * VLAN - * - * When the VLAN/QoS feature is enabled for a port for the first time the default VLAN behavior - * of the port is set to be as permissive (it will accept all the frames) and - * non-interferential (it will not change any frames) as possible: - * - the port VLAN ID (VID) is set to 0 - * - the Ingress acceptable frame filter is set to accept all frames - * - the VLAN port membership is set to the complete VLAN range (0 - 4094) - * - the Ingress tagging mode is set to pass-through (will not change frames) - * - the Egress tagging mode is to send tagged frames in the entire VLAN range (0 - 4094) - * - * Note that further disabling and re-enabling the VLAN feature for a given port will not reset the port VLAN behavior - * to the settings listed above. Any VLAN settings made by the user are kept. - * - * QoS - * - * The following default priority mapping table will be used (as per IEEE 802.1Q and IEEE 802.1D): - * - * - *
QoS traffic classes
QoS priority Default traffic class Traffic type - *
0 1 Best effort, default class for unexpedited traffic - *
1 0 Background traffic - *
2 0 Spare bandwidth - *
3 1 Excellent effort - *
4 2 Controlled load - *
5 2 Video traffic - *
6 3 Voice traffic - *
7 3 Network control - *
- * - * Firewall - * - * The port firewall is configured by default in black-list mode, and the firewall address table is empty. - * This means the firewall will not filter any frames until the feature is configured and the firewall table is - * downloaded to the NPE. - * - * Spanning Tree - * - * The port is set to STP unblocked mode, therefore it will accept all frames until re-configured. - * - * WiFi header conversion - * - * The WiFi header conversion database is empty, therefore no actual header conversion will take place until this - * feature is configured and the conversion table downloaded to the NPE. - * - * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the features on (use IX_ETH_DB_ALL_PORTS for all the ports) - * @param feature @ref IxEthDBFeature [in] - feature or feature set to enable or disable - * @param enabled BOOL [in] - true to enable the feature and false to disable it - * - * @note Certain features, from a functional point of view, cannot be disabled as such at NPE level; - * when such features are set to disabled using the EthDB API they will be configured in such - * a way to determine a behavior equivalent to the feature being disabled. As well as this, disabled - * features cannot be configured or accessed via the EthDB API (except for getting their status). - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_NO_PERMISSION attempted to enable mutually exclusive features, - * or a feature that depends on another feature which is not present or enabled - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE at least one of the features selected is unavailable - * @retval IX_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, BOOL enabled); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFeatureStatusGet(IxEthDBPortId portID, IxEthDBFeature feature, BOOL *present, BOOL *enabled) - * - * @brief Retrieves the availability and status of a feature set - * - * This function returns the availability and status for a feature set. - * Note that if more than one feature is selected (e.g. IX_ETH_DB_LEARNING | IX_ETH_DB_FILTERING) - * the "present" and "enabled" return values will be set to true only if all the features in the - * feature set are present and enabled (not only some). - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param feature @ref IxEthDBFeature [in] - identifier of the feature to retrieve the status for - * @param present BOOL [out] - location where a boolean flag indicating whether this feature is present will be written to - * @param enabled BOOL [out] - location where a boolean flag indicating whether this feature is enabled will be written to - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG either present or enabled pointer argument is invalid - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFeatureStatusGet(IxEthDBPortId portID, IxEthDBFeature feature, BOOL *present, BOOL *enabled); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFeaturePropertyGet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, IxEthDBPropertyType *type, void *value) - * - * @brief Retrieves the value of a feature property - * - * The EthDB features usually contain feature-specific properties describing or - * controlling how the feature operates. While essential properties (e.g. the - * firewall operating mode) have their own API, secondary properties can be - * retrieved using this function. - * - * Properties can be read-only or read-write. ixEthDBFeaturePropertyGet operates with - * both types of features. - * - * Properties have types associated with them. A descriptor indicating the property - * type is returned in the type argument for convenience. - * - * The currently supported properties and their corresponding features are as follows: - * - * - *
Properties for IX_ETH_DB_VLAN_QOS
Property identifier Property type Property value Read-Only - *
IX_ETH_DB_QOS_TRAFFIC_CLASS_COUNT_PROPERTY IX_ETH_DB_INTEGER_PROPERTY number of internal traffic classes Yes - *
IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY IX_ETH_DB_INTEGER_PROPERTY queue assignment for traffic class 0 Yes - *
IX_ETH_DB_QOS_TRAFFIC_CLASS_1_RX_QUEUE_PROPERTY IX_ETH_DB_INTEGER_PROPERTY queue assignment for traffic class 1 Yes - *
IX_ETH_DB_QOS_TRAFFIC_CLASS_2_RX_QUEUE_PROPERTY IX_ETH_DB_INTEGER_PROPERTY queue assignment for traffic class 2 Yes - *
IX_ETH_DB_QOS_TRAFFIC_CLASS_3_RX_QUEUE_PROPERTY IX_ETH_DB_INTEGER_PROPERTY queue assignment for traffic class 3 Yes - *
IX_ETH_DB_QOS_TRAFFIC_CLASS_4_RX_QUEUE_PROPERTY IX_ETH_DB_INTEGER_PROPERTY queue assignment for traffic class 4 Yes - *
IX_ETH_DB_QOS_TRAFFIC_CLASS_5_RX_QUEUE_PROPERTY IX_ETH_DB_INTEGER_PROPERTY queue assignment for traffic class 5 Yes - *
IX_ETH_DB_QOS_TRAFFIC_CLASS_6_RX_QUEUE_PROPERTY IX_ETH_DB_INTEGER_PROPERTY queue assignment for traffic class 6 Yes - *
IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY IX_ETH_DB_INTEGER_PROPERTY queue assignment for traffic class 7 Yes - *
- * - * @see ixEthDBFeaturePropertySet - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param feature @ref IxEthDBFeature [in] - EthDB feature for which the property is retrieved - * @param property @ref IxEthDBProperty [in] - property identifier - * @param type @ref IxEthDBPropertyType [out] - location where the property type will be stored - * @param value void [out] - location where the property value will be stored - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_INVALID_ARG invalid property identifier, type or value pointer arguments - * @retval IX_ETH_DB_FAIL incorrect property value or unknown error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFeaturePropertyGet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, IxEthDBPropertyType *type, void *value); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFeaturePropertySet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, void *value) - * - * @brief Sets the value of a feature property - * - * Unlike @ref ixEthDBFeaturePropertyGet, this function operates only with read-write properties - * - * The currently supported properties and their corresponding features are as follows: - * - * - IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE (for IX_ETH_DB_VLAN_QOS): freezes the availability of traffic classes - * to the number of traffic classes currently in use - * - * Note that this function creates deep copies of the property values; once the function is invoked the client - * can free or reuse the memory area containing the original property value. - * - * Copy behavior for different property types is defined as follows: - * - * - IX_ETH_DB_INTEGER_PROPERTY - 4 bytes are copied from the source location - * - IX_ETH_DB_STRING_PROPERTY - the source string will be copied up to the NULL '\0' string terminator, maximum of 255 characters - * - IX_ETH_DB_MAC_ADDR_PROPERTY - 6 bytes are copied from the source location - * - IX_ETH_DB_BOOL_PROPERTY - 4 bytes are copied from the source location; the only allowed values are true (1L) and false (0L) - * - * @see ixEthDBFeaturePropertySet - * - * @warning IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE is provided for EthAcc internal use; - * do not attempt to set this property directly - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param feature @ref IxEthDBFeature [in] - EthDB feature for which the property is set - * @param property @ref IxEthDBProperty [in] - property identifier - * @param value void [in] - location where the property value is to be copied from - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_INVALID_ARG invalid property identifier, value pointer, or invalid property value - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFeaturePropertySet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, void *value); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBDatabaseClear(IxEthDBPortId portID, IxEthDBRecordType recordType) - * - * @brief Deletes a set of record types from the Ethernet Database - * - * This function deletes all the records of certain types (specified in the recordType filter) - * associated with a port. Additionally, the IX_ETH_DB_ALL_PORTS value can be used as port ID - * to indicate that the specified record types should be deleted for all the ports. - * - * The record type filter can be an ORed combination of the following types: - * - * Record types - * - IX_ETH_DB_FILTERING_RECORD - * - *
Filtering record
MAC address static/dynamic type age
- * - * - IX_ETH_DB_FILTERING_VLAN_RECORD - * - *
VLAN-enabled filtering record
MAC address static/dynamic type age 802.1Q tag
- * - * - IX_ETH_DB_WIFI_RECORD - * - *
WiFi header conversion record
MAC address optional gateway MAC address
- * - * - IX_ETH_DB_FIREWALL_RECORD - * - *
Firewall record
MAC address
- * - IX_ETH_DB_ALL_RECORD_TYPES - * - * Any combination of the above types is valid e.g. - * - * (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD | IX_ETH_DB_FIREWALL_RECORD), - * - * although some might be redundant (it is not an error to do so) e.g. - * - * (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_ALL_RECORD_TYPES) - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param recordType @ref IxEthDBRecordType [in] - record type filter - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_INVALID_ARG invalid recordType filter - * - * @note If the record type filter contains any unrecognized value (hence the - * IX_ETH_DB_INVALID_ARG error value is returned) no actual records will be deleted. - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBDatabaseClear(IxEthDBPortId portID, IxEthDBRecordType recordType); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBWiFiStationEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) - * - * @brief Adds an "Access Point to Station" record to the database, for 802.3 => 802.11 frame - * header conversion - * - * Frame header conversion is controlled by the set of MAC addresses - * added using @ref ixEthDBWiFiStationEntryAdd and @ref ixEthDBWiFiAccessPointEntryAdd. - * Conversion arguments are added using @ref ixEthDBWiFiFrameControlSet, - * @ref ixEthDBWiFiDurationIDSet and @ref ixEthDBWiFiBBSIDSet. - * - * Note that adding the same MAC address twice will not return an error - * (but will not accomplish anything either), while re-adding a record previously added - * as an "Access Point to Access Point" will migrate the record to the "Access Point - * to Station" type. - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to add - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_INVALID_ARG macAddr is an invalid pointer - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr pointer argument - * @retval IX_ETH_DB_NOMEM maximum number of records reached - * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBWiFiStationEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBWiFiAccessPointEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr) - * - * @brief Adds an "Access Point to Access Point" record to the database - * - * @see ixEthDBWiFiStationEntryAdd - * - * Note that adding the same MAC address twice will simply overwrite the previously - * defined gateway MAC address value in the same record, if the record was previously of the - * "Access Point to Access Point" type. - * - * Re-adding a MAC address as "Access Point to Access Point", which was previously added as - * "Access Point to Station" will migrate the record type to "Access Point to Access Point" and - * record the gateway MAC address. - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to add - * @param gatewayMacAddr @ref IxEthDBMacAddr [in] - MAC address of the gateway Access Point - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG macAddr is an invalid pointer - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr or gatewayMacAddr pointer argument - * @retval IX_ETH_DB_NOMEM maximum number of records reached - * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBWiFiAccessPointEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBWiFiEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) - * - * @brief Removes a WiFi station record - * - * This function removes both types of WiFi records ("Access Point to Station" and - * "Access Point to Access Point"). - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to remove - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr pointer argument - * @retval IX_ETH_DB_NO_SUCH_ADDR specified address was not found in the database - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled - * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBWiFiEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBWiFiConversionTableDownload(IxEthDBPortId portID) - * - * @brief Downloads the MAC address table for 802.3 => 802.11 frame header - * conversion to the NPE - * - * Note that the frame conversion MAC address table must be individually downloaded - * to each NPE for which the frame header conversion feature is enabled (i.e. it - * is not possible to specify IX_ETH_DB_ALL_PORTS). - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled - * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBWiFiConversionTableDownload(IxEthDBPortId portID); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBWiFiFrameControlSet(IxEthDBPortId portID, UINT16 frameControl) - * - * @brief Sets the GlobalFrameControl field - * - * The GlobalFrameControl field is a 2-byte value inserted in the Frame Control - * field for all 802.3 to 802.11 frame header conversions - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param frameControl UINT16 [in] - GlobalFrameControl value - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled - * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBWiFiFrameControlSet(IxEthDBPortId portID, UINT16 frameControl); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBWiFiDurationIDSet(IxEthDBPortId portID, UINT16 durationID) - * - * @brief Sets the GlobalDurationID field - * - * The GlobalDurationID field is a 2-byte value inserted in the Duration/ID - * field for all 802.3 to 802.11 frame header conversions - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param durationID UINT16 [in] - GlobalDurationID field - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled - * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBWiFiDurationIDSet(IxEthDBPortId portID, UINT16 durationID); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBWiFiBBSIDSet(IxEthDBPortId portID, IxEthDBMacAddr *bbsid) - * - * @brief Sets the BBSID field - * - * The BBSID field is a 6-byte value which - * identifies the infrastructure of the service set managed - * by the Access Point having the IXP400 as its processor. The value - * is written in the BBSID field of the 802.11 frame header. - * The BBSID value is the MAC address of the Access Point. - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param bbsid @ref IxEthDBMacAddr [in] - pointer to 6 bytes containing the BSSID - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid bbsid pointer argument - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled - * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBWiFiBBSIDSet(IxEthDBPortId portID, IxEthDBMacAddr *bbsid); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBSpanningTreeBlockingStateSet(IxEthDBPortId portID, BOOL blocked) - * - * @brief Sets the STP blocked/unblocked state for a port - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param blocked BOOL [in] - true to set the port as STP blocked, false to set it as unblocked - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Spanning Tree Protocol feature not enabled - * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBSpanningTreeBlockingStateSet(IxEthDBPortId portID, BOOL blocked); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBSpanningTreeBlockingStateGet(IxEthDBPortId portID, BOOL *blocked) - * - * @brief Retrieves the STP blocked/unblocked state for a port - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param blocked BOOL * [in] - set to true if the port is STP blocked, false otherwise - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid blocked pointer argument - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Spanning Tree Protocol feature not enabled - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBSpanningTreeBlockingStateGet(IxEthDBPortId portID, BOOL *blocked); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode) - * - * @brief Sets the firewall mode to use white or black listing - * - * When enabled, the NPE MAC address based firewall support operates in two modes: - * - * - white-list mode (MAC address based admission) - * - mode set to IX_ETH_DB_FIREWALL_WHITE_LIST - * - only packets originating from MAC addresses contained in the firewall address list - * are allowed on the Rx path - * - black-list mode (MAC address based blocking) - * - mode set to IX_ETH_DB_FIREWALL_BLACK_LIST - * - packets originating from MAC addresses contained in the firewall address list - * are discarded - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param mode @ref IxEthDBFirewallMode [in] - firewall mode (IX_ETH_DB_FIREWALL_WHITE_LIST or IX_ETH_DB_FIREWALL_BLACK_LIST) - * - * @note by default the firewall operates in black-list mode with an empty address - * list, hence it doesn't filter any packets - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled - * @retval IX_ETH_DB_INVALID_ARGUMENT mode argument is not a valid firewall configuration mode - * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error -*/ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode); - -/** - * @ingroup IxEthDB - * - * @fn ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable) - * - * @brief Enables or disables invalid MAC address filtering - * - * According to IEEE802 it is illegal for a source address to be a multicast - * or broadcast address. If this feature is enabled the NPE inspects the source - * MAC addresses of incoming frames and discards them if invalid addresses are - * detected. - * - * By default this service is enabled, if the firewall feature is supported by the - * NPE image. - * - * @param portID ID of the port - * @param enable true to enable invalid MAC address filtering and false to disable it - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled - * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) - * - * @brief Adds a MAC address to the firewall address list - * - * Note that adding the same MAC address twice will not return an error - * but will not actually accomplish anything. - * - * The firewall MAC address list has a limited number of entries; once - * the maximum number of entries has been reached this function will failed - * to add more addresses, returning IX_ETH_DB_NOMEM. - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to be added - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr pointer argument - * @retval IX_ETH_DB_NOMEM maximum number of records reached - * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) - * - * @brief Removes a MAC address from the firewall address list - * - * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to be removed - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr pointer argument - * @retval IX_ETH_DB_NO_SUCH_ADDR address not found - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID) - * - * @brief Downloads the MAC firewall table to a port - * - * @param portID ID of the port - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier - * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized - * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled - * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBUserFieldSet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void *field) - * - * @brief Adds a user-defined field to a database record - * - * This function associates a user-defined field to a database record. - * The user-defined field is passed as a (void *) parameter, hence it can be used - * for any purpose (such as identifying a structure). Retrieving the user-defined field from - * a record is done using @ref ixEthDBUserFieldGet. Note that EthDB never uses the user-defined - * field for any internal operation and it is not aware of the significance of its contents. The - * field is only stored as a pointer. - * - * The database record is identified using a combination of the given parameters, depending on the record type. - * All the record types require the record MAC address. - * - * - IX_ETH_DB_FILTERING_RECORD requires only the MAC address - * - IX_ETH_DB_VLAN_FILTERING_RECORD requires the MAC address and the VLAN ID - * - IX_ETH_DB_WIFI_RECORD requires the MAC address and the portID - * - IX_ETH_DB_FIREWALL_RECORD requires the MAC address and the portID - * - * Please note that if a parameter is not required it is completely ignored (it does not undergo parameter checking). - * The user-defined field can be cleared using a NULL field parameter. - * - * @param recordType @ref IxEthDBRecordType [in] - type of record (can be IX_ETH_DB_FILTERING_RECORD, - * IX_ETH_DB_FILTERING_VLAN_RECORD, IX_ETH_DB_WIFI_RECORD or IX_ETH_DB_FIREWALL_RECORD) - * @param portID @ref IxEthDBPortId [in] - ID of the port (required only for WIFI and FIREWALL records) - * @param macAddr @ref IxEthDBMacAddr * [in] - MAC address of the record - * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID of the record (required only for FILTERING_VLAN records) - * @param field void * [in] - user defined field - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID was required but it is not a valid port identifier - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr pointer argument - * @retval IX_ETH_DB_NO_SUCH_ADDR record not found - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBUserFieldSet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void *field); - -/** - * @ingroup IxEthDB - * - * @fn IxEthDBStatus ixEthDBUserFieldGet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void **field) - * - * @brief Retrieves a user-defined field from a database record - * - * The database record is identified using a combination of the given parameters, depending on the record type. - * All the record types require the record MAC address. - * - * - IX_ETH_DB_FILTERING_RECORD requires only the MAC address - * - IX_ETH_DB_VLAN_FILTERING_RECORD requires the MAC address and the VLAN ID - * - IX_ETH_DB_WIFI_RECORD requires the MAC address and the portID - * - IX_ETH_DB_FIREWALL_RECORD requires the MAC address and the portID - * - * Please note that if a parameter is not required it is completely ignored (it does not undergo parameter checking). - * - * If no user-defined field was registered with the specified record then NULL will be written - * at the location specified by field. - * - * @param recordType type of record (can be IX_ETH_DB_FILTERING_RECORD, IX_ETH_DB_FILTERING_VLAN_RECORD, IX_ETH_DB_WIFI_RECORD - * or IX_ETH_DB_FIREWALL_RECORD) - * @param portID ID of the port (required only for WIFI and FIREWALL records) - * @param macAddr MAC address of the record - * @param vlanID VLAN ID of the record (required only for FILTERING_VLAN records) - * @param field location to write the user defined field into - * - * @retval IX_ETH_DB_SUCCESS operation completed successfully - * @retval IX_ETH_DB_INVALID_PORT portID was required but it is not a valid port identifier - * @retval IX_ETH_DB_INVALID_ARG invalid macAddr or field pointer arguments - * @retval IX_ETH_DB_NO_SUCH_ADDR record not found - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBUserFieldGet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portId, IxEthDBVlanId vlanID, void **field); - -/** - * @} - */ - -#endif /* IxEthDB_H */ diff --git a/drivers/net/npe/include/IxEthDBLocks_p.h b/drivers/net/npe/include/IxEthDBLocks_p.h deleted file mode 100644 index 91ab441b26..0000000000 --- a/drivers/net/npe/include/IxEthDBLocks_p.h +++ /dev/null @@ -1,98 +0,0 @@ -/** - * @file IxEthAccDBLocks_p.h - * - * @brief Definition of transaction lock stacks and lock utility macros - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#ifndef IxEthAccDBLocks_p_H -#define IxEthAccDBLocks_p_H - -#include "IxOsPrintf.h" - -/* Lock and lock stacks */ -typedef struct -{ - IxOsalFastMutex* locks[MAX_LOCKS]; - UINT32 stackPointer, basePointer; -} LockStack; - -#define TRY_LOCK(mutex) \ - { \ - if (ixOsalFastMutexTryLock(mutex) != IX_SUCCESS) \ - { \ - return IX_ETH_DB_BUSY; \ - } \ - } - - -#define UNLOCK(mutex) { ixOsalFastMutexUnlock(mutex); } - -#define INIT_STACK(stack) \ - { \ - (stack)->basePointer = 0; \ - (stack)->stackPointer = 0; \ - } - -#define PUSH_LOCK(stack, lock) \ - { \ - if ((stack)->stackPointer == MAX_LOCKS) \ - { \ - ERROR_LOG("Ethernet DB: maximum number of elements in a lock stack has been exceeded on push, heavy chaining?\n"); \ - UNROLL_STACK(stack); \ - \ - return IX_ETH_DB_NOMEM; \ - } \ - \ - if (ixOsalFastMutexTryLock(lock) == IX_SUCCESS) \ - { \ - (stack)->locks[(stack)->stackPointer++] = (lock); \ - } \ - else \ - { \ - UNROLL_STACK(stack); \ - \ - return IX_ETH_DB_BUSY; \ - } \ - } - -#define POP_LOCK(stack) \ - { \ - ixOsalFastMutexUnlock((stack)->locks[--(stack)->stackPointer]); \ - } - -#define UNROLL_STACK(stack) \ - { \ - while ((stack)->stackPointer > (stack)->basePointer) \ - { \ - POP_LOCK(stack); \ - } \ - } - -#define SHIFT_STACK(stack) \ - { \ - if ((stack)->basePointer == MAX_LOCKS - 1) \ - { \ - ERROR_LOG("Ethernet DB: maximum number of elements in a lock stack has been exceeded on shift, heavy chaining?\n"); \ - UNROLL_STACK(stack); \ - \ - return IX_ETH_DB_BUSY; \ - } \ - \ - ixOsalFastMutexUnlock((stack)->locks[(stack)->basePointer++]); \ - } - -#endif /* IxEthAccDBLocks_p_H */ diff --git a/drivers/net/npe/include/IxEthDBLog_p.h b/drivers/net/npe/include/IxEthDBLog_p.h deleted file mode 100644 index b3576236ff..0000000000 --- a/drivers/net/npe/include/IxEthDBLog_p.h +++ /dev/null @@ -1,203 +0,0 @@ -/** - * @file IxEthDBLog_p.h - * - * @brief definitions of log macros and log configuration - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include - -#ifdef IX_UNIT_TEST -#define NULL_PRINT_ROUTINE(format, arg...) /* nothing */ -#else -#define NULL_PRINT_ROUTINE if(0) printf -#endif - -/*************************************************** - * Globals * - ***************************************************/ -/* safe to permanently leave these on */ -#define HAS_ERROR_LOG -#define HAS_ERROR_IRQ_LOG -#define HAS_WARNING_LOG - -/*************************************************** - * Log Configuration * - ***************************************************/ - -/* debug output can be turned on unless specifically - declared as a non-debug build */ -#ifndef NDEBUG - -#undef HAS_EVENTS_TRACE -#undef HAS_EVENTS_VERBOSE_TRACE - -#undef HAS_SUPPORT_TRACE -#undef HAS_SUPPORT_VERBOSE_TRACE - -#undef HAS_NPE_TRACE -#undef HAS_NPE_VERBOSE_TRACE -#undef HAS_DUMP_NPE_TREE - -#undef HAS_UPDATE_TRACE -#undef HAS_UPDATE_VERBOSE_TRACE - -#endif /* NDEBUG */ - - -/*************************************************** - * Log Macros * - ***************************************************/ - -/************** Globals ******************/ - -#ifdef HAS_ERROR_LOG - - #define ERROR_LOG printf - -#else - - #define ERROR_LOG NULL_PRINT_ROUTINE - -#endif - -#ifdef HAS_ERROR_IRQ_LOG - - #define ERROR_IRQ_LOG(format, arg1, arg2, arg3, arg4, arg5, arg6) ixOsalLog(IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT, format, arg1, arg2, arg3, arg4, arg5, arg6) - -#else - - #define ERROR_IRQ_LOG(format, arg1, arg2, arg3, arg4, arg5, arg6) /* nothing */ - -#endif - -#ifdef HAS_WARNING_LOG - - #define WARNING_LOG printf - -#else - - #define WARNING_LOG NULL_PRINT_ROUTINE - -#endif - -/************** Events *******************/ - -#ifdef HAS_EVENTS_TRACE - - #define IX_ETH_DB_EVENTS_TRACE printf - #define IX_ETH_DB_IRQ_EVENTS_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) ixOsalLog(IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, format, arg1, arg2, arg3, arg4, arg5, arg6) - - #ifdef HAS_EVENTS_VERBOSE_TRACE - - #define IX_ETH_DB_EVENTS_VERBOSE_TRACE printf - - #else - - #define IX_ETH_DB_EVENTS_VERBOSE_TRACE NULL_PRINT_ROUTINE - - #endif /* HAS_EVENTS_VERBOSE_TRACE */ - -#else - - #define IX_ETH_DB_EVENTS_TRACE NULL_PRINT_ROUTINE - #define IX_ETH_DB_EVENTS_VERBOSE_TRACE NULL_PRINT_ROUTINE - #define IX_ETH_DB_IRQ_EVENTS_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) /* nothing */ - -#endif /* HAS_EVENTS_TRACE */ - -/************** Support *******************/ - -#ifdef HAS_SUPPORT_TRACE - - #define IX_ETH_DB_SUPPORT_TRACE printf - #define IX_ETH_DB_SUPPORT_IRQ_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) ixOsalLog(IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, format, arg1, arg2, arg3, arg4, arg5, arg6) - - #ifdef HAS_SUPPORT_VERBOSE_TRACE - - #define IX_ETH_DB_SUPPORT_VERBOSE_TRACE printf - - #else - - #define IX_ETH_DB_SUPPORT_VERBOSE_TRACE NULL_PRINT_ROUTINE - - #endif /* HAS_SUPPORT_VERBOSE_TRACE */ - -#else - - #define IX_ETH_DB_SUPPORT_TRACE NULL_PRINT_ROUTINE - #define IX_ETH_DB_SUPPORT_VERBOSE_TRACE NULL_PRINT_ROUTINE - #define IX_ETH_DB_SUPPORT_IRQ_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) /* nothing */ - -#endif /* HAS_SUPPORT_TRACE */ - -/************** NPE Adaptor *******************/ - -#ifdef HAS_NPE_TRACE - - #define IX_ETH_DB_NPE_TRACE printf - #define IX_ETH_DB_NPE_IRQ_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) ixOsalLog(IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, format, arg1, arg2, arg3, arg4, arg5, arg6) - - #ifdef HAS_NPE_VERBOSE_TRACE - - #define IX_ETH_DB_NPE_VERBOSE_TRACE printf - - #else - - #define IX_ETH_DB_NPE_VERBOSE_TRACE NULL_PRINT_ROUTINE - - #endif /* HAS_NPE_VERBOSE_TRACE */ - -#else - - #define IX_ETH_DB_NPE_TRACE NULL_PRINT_ROUTINE - #define IX_ETH_DB_NPE_VERBOSE_TRACE NULL_PRINT_ROUTINE - #define IX_ETH_DB_NPE_IRQ_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) /* nothing */ - -#endif /* HAS_NPE_TRACE */ - -#ifdef HAS_DUMP_NPE_TREE - -#define IX_ETH_DB_NPE_DUMP_ELT(eltBaseAddress, eltSize) ixEthELTDumpTree(eltBaseAddress, eltSize) - -#else - -#define IX_ETH_DB_NPE_DUMP_ELT(eltBaseAddress, eltSize) /* nothing */ - -#endif /* HAS_DUMP_NPE_TREE */ - -/************** Port Update *******************/ - -#ifdef HAS_UPDATE_TRACE - - #define IX_ETH_DB_UPDATE_TRACE printf - - #ifdef HAS_UPDATE_VERBOSE_TRACE - - #define IX_ETH_DB_UPDATE_VERBOSE_TRACE printf - - #else - - #define IX_ETH_DB_UPDATE_VERBOSE_TRACE NULL_PRINT_ROUTINE - - #endif - -#else /* HAS_UPDATE_VERBOSE_TRACE */ - - #define IX_ETH_DB_UPDATE_TRACE NULL_PRINT_ROUTINE - #define IX_ETH_DB_UPDATE_VERBOSE_TRACE NULL_PRINT_ROUTINE - -#endif /* HAS_UPDATE_TRACE */ diff --git a/drivers/net/npe/include/IxEthDBMessages_p.h b/drivers/net/npe/include/IxEthDBMessages_p.h deleted file mode 100644 index 5907fd59e2..0000000000 --- a/drivers/net/npe/include/IxEthDBMessages_p.h +++ /dev/null @@ -1,234 +0,0 @@ -/** - * @file IxEthDBMessages_p.h - * - * @brief Definitions of NPE messages - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#ifndef IxEthDBMessages_p_H -#define IxEthDBMessages_p_H - -#include -#include -#include "IxEthDB_p.h" - -/* events watched by the Eth event processor */ -#define IX_ETH_DB_MIN_EVENT_ID (IX_ETHNPE_EDB_GETMACADDRESSDATABASE) -#define IX_ETH_DB_MAX_EVENT_ID (IX_ETHNPE_PC_SETAPMACTABLE) - -/* macros to fill and extract data from NPE messages - place any endian conversions here */ -#define RESET_ELT_MESSAGE(message) { memset((void *) &(message), 0, sizeof((message))); } -#define NPE_MSG_ID(msg) ((msg).data[0] >> 24) - -#define FILL_SETPORTVLANTABLEENTRY_MSG(message, portID, setOffset, vlanMembershipSet, ttiSet) \ - do { \ - message.data[0] = (IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY << 24) | (portID << 16) | (setOffset * 2); \ - message.data[1] = (vlanMembershipSet << 8) | ttiSet; \ - } while (0); - -#define FILL_SETPORTVLANTABLERANGE_MSG(message, portID, offset, length, zone) \ - do { \ - message.data[0] = IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE << 24 | portID << 16 | offset << 9 | length << 1; \ - message.data[1] = (UINT32) zone; \ - } while (0); - -#define FILL_SETDEFAULTRXVID_MSG(message, portID, tpid, vlanTag) \ - do { \ - message.data[0] = (IX_ETHNPE_VLAN_SETDEFAULTRXVID << 24) \ - | (portID << 16); \ - \ - message.data[1] = (tpid << 16) | vlanTag; \ - } while (0); - -#define FILL_SETRXTAGMODE_MSG(message, portID, filterMode, tagMode) \ - do { \ - message.data[0] = IX_ETHNPE_VLAN_SETRXTAGMODE << 24 \ - | portID << 16 \ - | filterMode << 2 \ - | tagMode; \ - \ - message.data[1] = 0; \ - } while (0); - -#define FILL_SETRXQOSENTRY(message, portID, classIndex, trafficClass, aqmQueue) \ - do { \ - message.data[0] = IX_ETHNPE_VLAN_SETRXQOSENTRY << 24 \ - | portID << 16 \ - | classIndex; \ - \ - message.data[1] = trafficClass << 24 \ - | 0x1 << 23 \ - | aqmQueue << 16 \ - | aqmQueue << 4; \ - } while (0); - -#define FILL_SETPORTIDEXTRACTIONMODE(message, portID, enable) \ - do { \ - message.data[0] = IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE << 24 \ - | portID << 16 \ - | (enable ? 0x1 : 0x0); \ - \ - message.data[1] = 0; \ - } while (0); - - -#define FILL_SETBLOCKINGSTATE_MSG(message, portID, blocked) \ - do { \ - message.data[0] = IX_ETHNPE_STP_SETBLOCKINGSTATE << 24 \ - | portID << 16 \ - | (blocked ? 0x1 : 0x0); \ - \ - message.data[1] = 0; \ - } while (0); - -#define FILL_SETBBSID_MSG(message, portID, bbsid) \ - do { \ - message.data[0] = IX_ETHNPE_PC_SETBBSID << 24 \ - | portID << 16 \ - | bbsid->macAddress[0] << 8 \ - | bbsid->macAddress[1]; \ - \ - message.data[1] = bbsid->macAddress[2] << 24 \ - | bbsid->macAddress[3] << 16 \ - | bbsid->macAddress[4] << 8 \ - | bbsid->macAddress[5]; \ - } while (0); - -#define FILL_SETFRAMECONTROLDURATIONID(message, portID, frameControlDurationID) \ - do { \ - message.data[0] = (IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID << 24) | (portID << 16); \ - message.data[1] = frameControlDurationID; \ - } while (0); - -#define FILL_SETAPMACTABLE_MSG(message, zone) \ - do { \ - message.data[0] = IX_ETHNPE_PC_SETAPMACTABLE << 24 \ - | 0 << 8 /* always use index 0 */ \ - | 64; /* 32 entries, 8 bytes each, 4 bytes in a word */ \ - message.data[1] = (UINT32) zone; \ - } while (0); - -#define FILL_SETFIREWALLMODE_MSG(message, portID, epDelta, mode, address) \ - do { \ - message.data[0] = IX_ETHNPE_FW_SETFIREWALLMODE << 24 \ - | portID << 16 \ - | (epDelta & 0xFF) << 8 \ - | mode; \ - \ - message.data[1] = (UINT32) address; \ - } while (0); - -#define FILL_SETMACADDRESSDATABASE_MSG(message, portID, epDelta, blockCount, address) \ - do { \ - message.data[0] = IX_ETHNPE_EDB_SETMACADDRESSSDATABASE << 24 \ - | (epDelta & 0xFF) << 8 \ - | (blockCount & 0xFF); \ - \ - message.data[1] = (UINT32) address; \ - } while (0); - -#define FILL_GETMACADDRESSDATABASE(message, npeId, zone) \ - do { \ - message.data[0] = IX_ETHNPE_EDB_GETMACADDRESSDATABASE << 24; \ - message.data[1] = (UINT32) zone; \ - } while (0); - -#define FILL_SETMAXFRAMELENGTHS_MSG(message, portID, maxRxFrameSize, maxTxFrameSize) \ - do { \ - message.data[0] = IX_ETHNPE_SETMAXFRAMELENGTHS << 24 \ - | portID << 16 \ - | ((maxRxFrameSize + 63) / 64) << 8 /* max Rx 64-byte blocks */ \ - | (maxTxFrameSize + 63) / 64; /* max Tx 64-byte blocks */ \ - \ - message.data[1] = maxRxFrameSize << 16 | maxTxFrameSize; \ - } while (0); - -#define FILL_SETPORTADDRESS_MSG(message, portID, macAddress) \ - do { \ - message.data[0] = IX_ETHNPE_EDB_SETPORTADDRESS << 24 \ - | portID << 16 \ - | macAddress[0] << 8 \ - | macAddress[1]; \ - \ - message.data[1] = macAddress[2] << 24 \ - | macAddress[3] << 16 \ - | macAddress[4] << 8 \ - | macAddress[5]; \ - } while (0); - -/* access to a MAC node in the NPE tree */ -#define NPE_NODE_BYTE(eltNodeAddr, offset) (((UINT8 *) (eltNodeAddr))[offset]) - -/* browsing of the implicit linear binary tree structure of the NPE tree */ -#define LEFT_CHILD_OFFSET(offset) ((offset) << 1) -#define RIGHT_CHILD_OFFSET(offset) (((offset) << 1) + 1) - -#define IX_EDB_FLAGS_ACTIVE (0x2) -#define IX_EDB_FLAGS_VALID (0x1) -#define IX_EDB_FLAGS_RESERVED (0xfc) -#define IX_EDB_FLAGS_INACTIVE_VALID (0x1) - -#define IX_EDB_NPE_NODE_ELT_PORT_ID_OFFSET (6) -#define IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET (7) -#define IX_EDB_NPE_NODE_WIFI_INDEX_OFFSET (6) -#define IX_EDB_NPE_NODE_WIFI_FLAGS_OFFSET (7) -#define IX_EDB_NPE_NODE_FW_FLAGS_OFFSET (1) -#define IX_EDB_NPE_NODE_FW_RESERVED_OFFSET (6) -#define IX_EDB_NPE_NODE_FW_ADDR_OFFSET (2) - -#define IX_EDB_NPE_NODE_VALID(address) ((NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET) & IX_EDB_FLAGS_VALID) != 0) -#define IX_EDB_NPE_NODE_ACTIVE(address) ((NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET) & IX_EDB_FLAGS_ACTIVE) != 0) -#define IX_EDB_NPE_NODE_PORT_ID(address) (NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_PORT_ID_OFFSET)) - -/* macros to send messages to the NPEs */ -#define IX_ETHDB_ASYNC_SEND_NPE_MSG(npeId, msg, result) \ - do { \ - result = ixNpeMhMessageSend(npeId, msg, IX_NPEMH_SEND_RETRIES_DEFAULT); \ - \ - if (result != IX_SUCCESS) \ - { \ - ERROR_LOG("DB: Failed to send NPE message\n"); \ - } \ - } while (0); - -#define IX_ETHDB_SYNC_SEND_NPE_MSG(npeId, msg, result) \ - do { \ - result = ixNpeMhMessageWithResponseSend(npeId, msg, msg.data[0] >> 24, ixEthDBNpeMsgAck, IX_NPEMH_SEND_RETRIES_DEFAULT); \ - \ - if (result == IX_SUCCESS) \ - { \ - result = ixOsalMutexLock(&ixEthDBPortInfo[IX_ETH_DB_NPE_TO_PORT_ID(npeId)].npeAckLock, IX_ETH_DB_NPE_TIMEOUT); \ - \ - if (result != IX_SUCCESS) \ - { \ - ERROR_LOG("DB: NPE failed to respond within %dms\n", IX_ETH_DB_NPE_TIMEOUT); \ - } \ - } \ - else \ - { \ - ERROR_LOG("DB: Failed to send NPE message\n"); \ - } \ - } while (0); - -#ifndef IX_NDEBUG -#define IX_ETH_DB_NPE_MSG_HISTORY_DEPTH (100) -extern IX_ETH_DB_PUBLIC UINT32 npeMsgHistory[IX_ETH_DB_NPE_MSG_HISTORY_DEPTH][2]; -extern IX_ETH_DB_PUBLIC UINT32 npeMsgHistoryLen; -#endif - -#define IX_ETHDB_SEND_NPE_MSG(npeId, msg, result) { LOG_NPE_MSG(msg); IX_ETHDB_SYNC_SEND_NPE_MSG(npeId, msg, result); } - -#endif /* IxEthDBMessages_p_H */ diff --git a/drivers/net/npe/include/IxEthDBPortDefs.h b/drivers/net/npe/include/IxEthDBPortDefs.h deleted file mode 100644 index 9f5e467832..0000000000 --- a/drivers/net/npe/include/IxEthDBPortDefs.h +++ /dev/null @@ -1,139 +0,0 @@ -/** - * @file IxEthDBPortDefs.h - * - * @brief Public definition of the ports and port capabilities - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/** - * @defgroup IxEthDBPortDefs IXP400 Ethernet Database Port Definitions (IxEthDBPortDefs) - * - * @brief IXP400 Public definition of the ports and port capabilities - * - * @{ - */ - -#ifndef IxEthDBPortDefs_H -#define IxEthDBPortDefs_H - -/** - * @brief Port types - currently only Ethernet NPEs are recognized as specific types - * All other (user-defined) ports must be specified as IX_ETH_GENERIC - */ -typedef enum -{ - IX_ETH_GENERIC = 0, /**< generic ethernet port */ - IX_ETH_NPE /**< specific Ethernet NPE */ -} IxEthDBPortType; - -/** - * @brief Port capabilities - used by ixEthAccDatabaseMaintenance to decide whether it - * should manually age entries or not depending on the port capabilities. - * - * Ethernet NPEs have aging capabilities, meaning that they will age the entries - * automatically (by themselves).*/ -typedef enum -{ - IX_ETH_NO_CAPABILITIES = 0, /**< no aging capabilities */ - IX_ETH_ENTRY_AGING = 0x1 /**< aging capabilities present */ -} IxEthDBPortCapability; - -/** - * @brief Port Definition - a structure contains the Port type and capabilities - */ -typedef struct -{ - IxEthDBPortType type; - IxEthDBPortCapability capabilities; -} IxEthDBPortDefinition; - -/** - * @brief Port definitions structure, indexed on the port ID - * @warning Ports 0 and 1 are used by the Ethernet access component therefore - * it is essential to be left untouched. Port 2 here (WAN) is given as - * an example port. The NPE firmware also assumes the NPE B to be - * the port 0 and NPE C to be the port 1. - * - * @note that only 32 ports (0..31) are supported by EthDB - */ -static const IxEthDBPortDefinition ixEthDBPortDefinitions[] = -{ - /* id type capabilities */ - { /* 0 */ IX_ETH_NPE, IX_ETH_NO_CAPABILITIES }, /* Ethernet NPE B */ - { /* 1 */ IX_ETH_NPE, IX_ETH_NO_CAPABILITIES }, /* Ethernet NPE C */ - { /* 2 */ IX_ETH_NPE, IX_ETH_NO_CAPABILITIES }, /* Ethernet NPE A */ - { /* 3 */ IX_ETH_GENERIC, IX_ETH_NO_CAPABILITIES }, /* WAN port */ -}; - -/** - * @def IX_ETH_DB_NUMBER_OF_PORTS - * @brief number of supported ports - */ -#define IX_ETH_DB_NUMBER_OF_PORTS ARRAY_SIZE(ixEthDBPortDefinitions) - -/** - * @def IX_ETH_DB_UNKNOWN_PORT - * @brief definition of an unknown port - */ -#define IX_ETH_DB_UNKNOWN_PORT (0xff) - -/** - * @def IX_ETH_DB_ALL_PORTS - * @brief Special port ID indicating all the ports - * @note This port ID can be used only by a subset of the EthDB API; each - * function specifically mentions whether this is a valid parameter as the port ID - */ -#define IX_ETH_DB_ALL_PORTS (IX_ETH_DB_NUMBER_OF_PORTS + 1) - -/** - * @def IX_ETH_DB_PORTS_ASSERTION - * @brief catch invalid port definitions (<2) with a - * compile-time assertion resulting in a duplicate case error. - */ -#define IX_ETH_DB_PORTS_ASSERTION { switch(0) { case 0 : ; case 1 : ; case IX_ETH_DB_NUMBER_OF_PORTS : ; }} - -/** - * @def IX_ETH_DB_CHECK_PORT(portID) - * @brief safety checks to verify whether the port is invalid or uninitialized - */ -#define IX_ETH_DB_CHECK_PORT(portID) \ -{ \ - if ((portID) >= IX_ETH_DB_NUMBER_OF_PORTS) \ - { \ - return IX_ETH_DB_INVALID_PORT; \ - } \ - \ - if (!ixEthDBPortInfo[(portID)].enabled) \ - { \ - return IX_ETH_DB_PORT_UNINITIALIZED; \ - } \ -} - -/** - * @def IX_ETH_DB_CHECK_PORT_ALL(portID) - * @brief safety checks to verify whether the port is invalid or uninitialized; - * tolerates the use of IX_ETH_DB_ALL_PORTS - */ -#define IX_ETH_DB_CHECK_PORT_ALL(portID) \ -{ \ - if ((portID) != IX_ETH_DB_ALL_PORTS) \ - IX_ETH_DB_CHECK_PORT(portID) \ -} - -#endif /* IxEthDBPortDefs_H */ -/** - *@} - */ diff --git a/drivers/net/npe/include/IxEthDBQoS.h b/drivers/net/npe/include/IxEthDBQoS.h deleted file mode 100644 index 6276930dc7..0000000000 --- a/drivers/net/npe/include/IxEthDBQoS.h +++ /dev/null @@ -1,130 +0,0 @@ -/** - * @file IxEthDBQoS.h - * - * @brief Public definitions for QoS traffic classes - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/** - * @defgroup IxEthDBPortDefs IXP400 Ethernet QoS definitions - * - * @brief IXP00 Public definitions for QoS traffic classes - * - * @{ - */ - -#ifndef IxEthDBQoS_H -#define IxEthDBQoS_H - -/** - * @def IX_ETH_DB_QUEUE_UNAVAILABLE - * @brief alias to indicate a queue (traffic class) is not available - */ -#define IX_ETH_DB_QUEUE_UNAVAILABLE (0) - -#ifndef IX_IEEE802_1Q_QOS_PRIORITY_COUNT -/** - * @def IX_IEEE802_1Q_QOS_PRIORITY_COUNT - * @brief number of QoS priorities, according to IEEE 802.1Q - */ -#define IX_IEEE802_1Q_QOS_PRIORITY_COUNT (8) -#endif - -/** - * @brief array containing all the supported traffic class configurations - */ -static const -UINT8 ixEthDBQueueAssignments[][IX_IEEE802_1Q_QOS_PRIORITY_COUNT] = -{ - { 4, 5, 6, 7, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE }, - { 15, 16, 17, 18, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE }, - { 11, 23, 26, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE }, - { 4, 5, 6, 7, 8, 9, 10, 11 } - /* add here all other cases of queue configuration structures and update ixEthDBTrafficClassDefinitions to use them */ -}; - -/** - * @brief value used to index the NPE A functionality ID in the traffic class definition table - */ -#define IX_ETH_DB_NPE_A_FUNCTIONALITY_ID_INDEX (0) - -/** - * @brief value used to index the traffic class count in the traffic class definition table - */ -#define IX_ETH_DB_TRAFFIC_CLASS_COUNT_INDEX (1) - -/** - * @brief value used to index the queue assignment index in the traffic class definition table - */ -#define IX_ETH_DB_QUEUE_ASSIGNMENT_INDEX (2) - -/** - * @brief traffic class definitions - * - * This array contains the default traffic class definition configuration, - * as well as any special cases dictated by the functionality ID of NPE A. - * - * The default case should not be removed (otherwise the Ethernet - * components will assert a fatal failure on initialization). - */ -static const -UINT8 ixEthDBTrafficClassDefinitions[][3] = -{ - /* NPE A functionality ID | traffic class count | queue assignment index (points to the queue enumeration in ixEthDBQueueAssignments) */ - { 0x00, 4, 0 }, /* default case - DO NOT REMOVE */ - { 0x04, 4, 1 }, /* NPE A image ID 0.4.0.0 */ - { 0x09, 3, 2 }, /* NPE A image ID 0.9.0.0 */ - { 0x80, 8, 3 }, /* NPE A image ID 10.80.02.0 */ - { 0x81, 8, 3 }, /* NPE A image ID 10.81.02.0 */ - { 0x82, 8, 3 } /* NPE A image ID 10.82.02.0 */ -}; - -/** - * @brief IEEE 802.1Q recommended QoS Priority => traffic class maps - * - * @verbatim - Number of available traffic classes - 1 2 3 4 5 6 7 8 - QoS Priority - 0 0 0 0 1 1 1 1 2 - 1 0 0 0 0 0 0 0 0 - 2 0 0 0 0 0 0 0 1 - 3 0 0 0 1 1 2 2 3 - 4 0 1 1 2 2 3 3 4 - 5 0 1 1 2 3 4 4 5 - 6 0 1 2 3 4 5 5 6 - 7 0 1 2 3 4 5 6 7 - - @endverbatim - */ -static const -UINT8 ixEthIEEE802_1QUserPriorityToTrafficClassMapping[IX_IEEE802_1Q_QOS_PRIORITY_COUNT][IX_IEEE802_1Q_QOS_PRIORITY_COUNT] = - { - { 0, 0, 0, 0, 0, 0, 0, 0 }, /* 1 traffic class available */ - { 0, 0, 0, 0, 1, 1, 1, 1 }, /* 2 traffic classes available */ - { 0, 0, 0, 0, 1, 1, 2, 2 }, /* 3 traffic classes available */ - { 1, 0, 0, 1, 2, 2, 3, 3 }, /* 4 traffic classes available */ - { 1, 0, 0, 1, 2, 3, 4, 4 }, /* 5 traffic classes available */ - { 1, 0, 0, 2, 3, 4, 5, 5 }, /* 6 traffic classes available */ - { 1, 0, 0, 2, 3, 4, 5, 6 }, /* 7 traffic classes available */ - { 2, 0, 1, 3, 4, 5, 6, 7 } /* 8 traffic classes available */ - }; - -#endif /* IxEthDBQoS_H */ - -/** - *@} - */ diff --git a/drivers/net/npe/include/IxEthDB_p.h b/drivers/net/npe/include/IxEthDB_p.h deleted file mode 100644 index ddc10a5789..0000000000 --- a/drivers/net/npe/include/IxEthDB_p.h +++ /dev/null @@ -1,686 +0,0 @@ -/** - * @file IxEthDB_p.h - * - * @brief Private MAC learning API - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#ifndef IxEthDB_p_H -#define IxEthDB_p_H - -#include -#include -#include -#include -#include - -#include "IxEthDBMessages_p.h" -#include "IxEthDBLog_p.h" - -#if (CPU==SIMSPARCSOLARIS) - -/* when running unit tests intLock() won't protect the event queue so we lock it manually */ -#define TEST_FIXTURE_LOCK_EVENT_QUEUE { ixOsalMutexLock(&eventQueueLock, IX_OSAL_WAIT_FOREVER); } -#define TEST_FIXTURE_UNLOCK_EVENT_QUEUE { ixOsalMutexUnlock(&eventQueueLock); } - -#else - -#define TEST_FIXTURE_LOCK_EVENT_QUEUE /* nothing */ -#define TEST_FIXTURE_UNLOCK_EVENT_QUEUE /* nothing */ - -#endif /* #if(CPU==SIMSPARCSOLARIS) */ - -#ifndef IX_UNIT_TEST - -#define TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER /* nothing */ -#define TEST_FIXTURE_MARK_OVERFLOW_EVENT /* nothing */ - -#else - -extern int dbAccessCounter; -extern int overflowEvent; - -#define TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER { dbAccessCounter++; } -#define TEST_FIXTURE_MARK_OVERFLOW_EVENT { overflowEvent = 1; } - -#endif - -/* code readability markers */ -#define __mempool__ /* memory pool marker */ -#define __lock__ /* hash write locking marker */ -#define __smartpointer__ /* smart pointer marker - warning: use only clone() when duplicating! */ -#define __alignment__ /* marker for data used only as alignment zones */ - -/* constants */ -#define IX_ETH_DB_NPE_TIMEOUT (100) /* NPE response timeout, in ms */ - -/** - * number of hash table buckets - * it should be at least 8x the predicted number of entries for performance - * each bucket needs 8 bytes - */ -#define NUM_BUCKETS (8192) - -/** - * number of hash table buckets to preload when incrementing bucket iterator - * = two cache lines - */ -#define IX_ETHDB_CACHE_LINE_AHEAD (2) - -#define IX_ETHDB_BUCKETPTR_AHEAD ((IX_ETHDB_CACHE_LINE_AHEAD * IX_OSAL_CACHE_LINE_SIZE)/sizeof(void *)) - -#define IX_ETHDB_BUCKET_INDEX_MASK (((IX_OSAL_CACHE_LINE_SIZE)/sizeof(void *)) - 1) - -/* locks */ -#define MAX_LOCKS (20) /**< maximum number of locks used simultaneously, do not tamper with */ - -/* learning tree constants */ -#define INITIAL_ELT_SIZE (8) /**< initial byte size of tree (empty unused root size) */ -#define MAX_ELT_SIZE (512) /**< maximum number of entries (includes unused root) */ -#define MAX_GW_SIZE (32) /**< maximum number of gateway entries (including unused root) */ -#define MAX_FW_SIZE (32) /**< maximum number of firewall entries (including unused root) */ -#define ELT_ENTRY_SIZE (8) /**< entry size, in bytes */ -#define ELT_ROOT_OFFSET (ELT_ENTRY_SIZE) /**< tree root offset, in bytes - node preceeding root is unused */ -#define FULL_ELT_BYTE_SIZE (MAX_ELT_SIZE * ELT_ENTRY_SIZE) /**< full size of tree, in bytes, including unused root */ -#define FULL_GW_BYTE_SIZE (MAX_GW_SIZE * ELT_ENTRY_SIZE) /**< full size of gateway list, in bytes, including unused root */ -#define FULL_FW_BYTE_SIZE (MAX_FW_SIZE * ELT_ENTRY_SIZE) /**< full size of firewall table, in bytes, including unused root */ - -/* maximum size of the VLAN table: - * 4096 bits (one per VLAN) - * 8 bits in one byte - * interleaved VLAN membership and VLAN TTI (*2) */ -#define FULL_VLAN_BYTE_SIZE (4096 / 8 * 2) - -/* upper 9 bits used as set index, lower 3 bits as byte index */ -#define VLAN_SET_OFFSET(vlanID) ((vlanID) >> 3) -#define VLAN_SET_MASK(vlanID) (0x7 - ((vlanID) & 0x7)) - -/* Update zone definitions */ -#define NPE_TREE_MEM_SIZE (4096) /* ((511 entries + 1 unused root) * 8 bytes/entry) */ - -/* check the above value, we rely on 4k */ -#if NPE_TREE_MEM_SIZE != 4096 - #error NPE_TREE_MEM_SIZE is not defined to 4096 bytes! -#endif - -/* Size Filtering limits (Jumbo frame filtering) */ -#define IX_ETHDB_MAX_FRAME_SIZE 65535 /* other ports than NPE ports */ -#define IX_ETHDB_MIN_FRAME_SIZE 1 /* other ports than NPE ports */ -#define IX_ETHDB_MAX_NPE_FRAME_SIZE 16320 /* NPE ports firmware limit */ -#define IX_ETHDB_MIN_NPE_FRAME_SIZE 1 /* NPE ports firmware limit */ -#define IX_ETHDB_DEFAULT_FRAME_SIZE 1522 - -/* memory management pool sizes */ - -/* - * Note: - * - * NODE_POOL_SIZE controls the maximum number of elements in the database at any one time. - * It should be large enough to cover all the search trees of all the ports simultaneously. - * - * MAC_POOL_SIZE should be higher than NODE_POOL_SIZE by at least the total number of MAC addresses - * possible to be held at any time in all the ports. - * - * TREE_POOL_SIZE should follow the same guideline as for MAC_POOL_SIZE. - * - * The database structure described here (2000/4000/4000) is enough for two NPEs holding at most 511 - * entries each plus one PCI NIC holding at most 900 entries. - */ - -#define NODE_POOL_SIZE (2000) /**< number of HashNode objects - also master number of elements in the database; each entry has 16 bytes */ -#define MAC_POOL_SIZE (4000) /**< number of MacDescriptor objects; each entry has 28 bytes */ -#define TREE_POOL_SIZE (4000) /**< number of MacTreeNode objects; each entry has 16 bytes */ - -/* retry policies */ -#define BUSY_RETRY_ENABLED (true) /**< if set to true the API will retry automatically calls returning BUSY */ -#define FOREVER_RETRY (true) /**< if set to true the API will retry forever BUSY calls */ -#define MAX_RETRIES (400) /**< upper retry limit - used only when FOREVER_RETRY is false */ -#define BUSY_RETRY_YIELD (5) /**< ticks to yield for every failed retry */ - -/* event management */ -#define EVENT_QUEUE_SIZE (500) /**< size of the sink collecting events from the Message Handler FIFO */ -#define EVENT_PROCESSING_LIMIT (100) /**< batch processing control size (how many events are extracted from the queue at once) */ - -/* MAC descriptors */ -#define STATIC_ENTRY (true) -#define DYNAMIC_ENTRY (false) - -/* age reset on next maintenance - incrementing by 1 will reset to 0 */ -#define AGE_RESET (0xFFFFFFFF) - -/* dependency maps */ -#define EMPTY_DEPENDENCY_MAP (0) - -/* trees */ -#define RIGHT (1) -#define LEFT (-1) - -/* macros */ -#define IX_ETH_DB_CHECK_PORT_EXISTS(portID) \ -{ \ - if ((portID) >= IX_ETH_DB_NUMBER_OF_PORTS) \ - { \ - return IX_ETH_DB_INVALID_PORT; \ - } \ -} - -#define IX_ETH_DB_CHECK_PORT_INITIALIZED(portID) \ -{ \ - if ((portID) >= IX_ETH_DB_NUMBER_OF_PORTS) \ - { \ - return IX_ETH_DB_INVALID_PORT; \ - } \ - else \ - { \ - if (!ixEthDBPortInfo[portID].initialized) \ - { \ - return IX_ETH_DB_PORT_UNINITIALIZED; \ - } \ - } \ -} - -/* single NPE check */ -#define IX_ETH_DB_CHECK_SINGLE_NPE(portID) \ - if (ixEthDBSingleEthNpeCheck(portID) != IX_ETH_DB_SUCCESS) \ - { \ - WARNING_LOG("EthDB: port ID %d is unavailable\n",(UINT32) portID); \ - \ - return IX_ETH_DB_INVALID_PORT; \ - } - -/* feature check */ -#define IX_ETH_DB_CHECK_FEATURE(portID, feature) \ - if ((ixEthDBPortInfo[portID].featureStatus & feature) == 0) \ - { \ - return IX_ETH_DB_FEATURE_UNAVAILABLE; \ - } - -/* busy retrying */ -#define BUSY_RETRY(functionCall) \ - { \ - UINT32 retries = 0; \ - IxEthDBStatus br_result; \ - \ - while ((br_result = functionCall) == IX_ETH_DB_BUSY \ - && BUSY_RETRY_ENABLED && (FOREVER_RETRY || ++retries < MAX_RETRIES)) { ixOsalSleep(BUSY_RETRY_YIELD); }; \ - \ - if ((!FOREVER_RETRY && retries == MAX_RETRIES) || (br_result == IX_ETH_DB_FAIL)) \ - {\ - ERROR_LOG("Ethernet Learning Database Error: BUSY_RETRY failed at %s:%d\n", __FILE__, __LINE__); \ - }\ - } - -#define BUSY_RETRY_WITH_RESULT(functionCall, brwr_result) \ - { \ - UINT32 retries = 0; \ - \ - while ((brwr_result = functionCall) == IX_ETH_DB_BUSY \ - && BUSY_RETRY_ENABLED && (FOREVER_RETRY || ++retries < MAX_RETRIES)) { ixOsalSleep(BUSY_RETRY_YIELD); }; \ - \ - if ((!FOREVER_RETRY && retries == MAX_RETRIES) || (brwr_result == IX_ETH_DB_FAIL)) \ - {\ - ERROR_LOG("Ethernet Learning Database Error: BUSY_RETRY_WITH_RESULT failed at %s:%d\n", __FILE__, __LINE__); \ - }\ - } - -/* iterators */ -#define IS_ITERATOR_VALID(iteratorPtr) ((iteratorPtr)->node != NULL) - -/* dependency port maps */ - -/* Warning: if port indexing starts from 1 replace (portID) with (portID - 1) in DEPENDENCY_MAP (and make sure IX_ETH_DB_NUMBER_OF_PORTS is big enough) */ - -/* gives an empty dependency map */ -#define SET_EMPTY_DEPENDENCY_MAP(map) { int i = 0; for (; i < 32 ; i++) map[i] = 0; } - -#define IS_EMPTY_DEPENDENCY_MAP(result, map) { int i = 0 ; result = true; for (; i < 32 ; i++) if (map[i] != 0) { result = false; break; }} - -/** - * gives a map consisting only of 'portID' - */ -#define SET_DEPENDENCY_MAP(map, portID) {SET_EMPTY_DEPENDENCY_MAP(map); map[portID >> 3] = 1 << (portID & 0x7);} - -/** - * gives a map resulting from joining map1 and map2 - */ -#define JOIN_MAPS(map, map1, map2) { int i = 0; for (; i < 32 ; i++) map[i] = map1[i] | map2[i]; } - -/** - * gives the map resulting from joining portID and map - */ -#define JOIN_PORT_TO_MAP(map, portID) { map[portID >> 3] |= 1 << (portID & 0x7); } - -/** - * gives the map resulting from excluding portID from map - */ -#define EXCLUDE_PORT_FROM_MAP(map, portID) { map[portID >> 3] &= ~(1 << (portID & 0x7); } - -/** - * returns true if map1 is a subset of map2 and false otherwise - */ -#define IS_MAP_SUBSET(result, map1, map2) { int i = 0; result = true; for (; i < 32 ; i++) if ((map1[i] | map2[i]) != map2[i]) result = false; } - -/** - * returns true is portID is part of map and false otherwise - */ -#define IS_PORT_INCLUDED(portID, map) ((map[portID >> 3] & (1 << (portID & 0x7))) != 0) - -/** - * returns the difference between map1 and map2 (ports included in map1 and not included in map2) - */ -#define DIFF_MAPS(map, map1, map2) { int i = 0; for (; i < 32 ; i++) map[i] = map1[i] ^ (map1[i] & map2[i]); } - -/** - * returns true if the maps collide (have at least one port in common) and false otherwise - */ -#define MAPS_COLLIDE(result, map1, map2) { int i = 0; result = false; for (; i < 32 ; i++) if ((map1[i] & map2[i]) != 0) result = true; } - -/* size (number of ports) of a dependency map */ -#define GET_MAP_SIZE(map, size) { int i = 0, b = 0; size = 0; for (; i < 32 ; i++) { char y = map[i]; for (; b < 8 && (y >>= 1); b++) size += (y & 1); }} - -/* copy map2 into map1 */ -#define COPY_DEPENDENCY_MAP(map1, map2) { memcpy (map1, map2, sizeof (map1)); } - -/* definition of a port map size/port number which cannot be reached (we support at most 32 ports) */ -#define MAX_PORT_SIZE (0xFF) -#define MAX_PORT_NUMBER (0xFF) - -#define IX_ETH_DB_CHECK_REFERENCE(ptr) { if ((ptr) == NULL) { return IX_ETH_DB_INVALID_ARG; } } -#define IX_ETH_DB_CHECK_MAP(portID, map) { if (!IS_PORT_INCLUDED(portID, map)) { return IX_ETH_DB_INVALID_ARG; } } - -/* event queue macros */ -#define EVENT_QUEUE_WRAP(offset) ((offset) >= EVENT_QUEUE_SIZE ? (offset) - EVENT_QUEUE_SIZE : (offset)) - -#define CAN_ENQUEUE(eventQueuePtr) ((eventQueuePtr)->length < EVENT_QUEUE_SIZE) - -#define QUEUE_HEAD(eventQueuePtr) (&(eventQueuePtr)->queue[EVENT_QUEUE_WRAP((eventQueuePtr)->base + (eventQueuePtr)->length)]) - -#define QUEUE_TAIL(eventQueuePtr) (&(eventQueuePtr)->queue[(eventQueuePtr)->base]) - -#define PUSH_UPDATE_QUEUE(eventQueuePtr) { (eventQueuePtr)->length++; } - -#define SHIFT_UPDATE_QUEUE(eventQueuePtr) \ - { \ - (eventQueuePtr)->base = EVENT_QUEUE_WRAP((eventQueuePtr)->base + 1); \ - (eventQueuePtr)->length--; \ - } - -#define RESET_QUEUE(eventQueuePtr) \ - { \ - (eventQueuePtr)->base = 0; \ - (eventQueuePtr)->length = 0; \ - } - -/* node stack macros - used to browse a tree without using a recursive function */ -#define NODE_STACK_INIT(stack) { (stack)->nodeCount = 0; } -#define NODE_STACK_PUSH(stack, node, offset) { (stack)->nodes[(stack)->nodeCount] = (node); (stack)->offsets[(stack)->nodeCount++] = (offset); } -#define NODE_STACK_POP(stack, node, offset) { (node) = (stack)->nodes[--(stack)->nodeCount]; offset = (stack)->offsets[(stack)->nodeCount]; } -#define NODE_STACK_NONEMPTY(stack) ((stack)->nodeCount != 0) - -#ifndef IX_NDEBUG -#define IX_ETH_DB_NPE_MSG_HISTORY_DEPTH (100) -#define LOG_NPE_MSG(msg) \ - do { \ - UINT32 npeMsgHistoryIndex = (npeMsgHistoryLen++) % IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; \ - npeMsgHistory[npeMsgHistoryIndex][0] = msg.data[0]; \ - npeMsgHistory[npeMsgHistoryIndex][1] = msg.data[1]; \ - } while (0); -#else -#define LOG_NPE_MSG() /* nothing */ -#endif - -/* ----------- Data -------------- */ - -/* typedefs */ - -typedef UINT32 (*HashFunction)(void *entity); -typedef BOOL (*MatchFunction)(void *reference, void *entry); -typedef void (*FreeFunction)(void *entry); - -/** - * basic component of a hash table - */ -typedef struct HashNode_t -{ - void *data; /**< specific data */ - struct HashNode_t *next; /**< used for bucket chaining */ - - __mempool__ struct HashNode_t *nextFree; /**< memory pool management */ - - __lock__ IxOsalFastMutex lock; /**< node lock */ -} HashNode; - -/** - * @brief hash table iterator definition - * - * an iterator is an object which can be used - * to browse a hash table - */ -typedef struct -{ - UINT32 bucketIndex; /**< index of the currently iterated bucket */ - HashNode *previousNode; /**< reference to the previously iterated node within the current bucket */ - HashNode *node; /**< reference to the currently iterated node */ -} HashIterator; - -/** - * definition of a MAC descriptor (a database record) - */ - -typedef enum -{ - IX_ETH_DB_WIFI_AP_TO_STA = 0x0, - IX_ETH_DB_WIFI_AP_TO_AP = 0x1 -} IxEthDBWiFiRecordType; - -typedef union -{ - struct - { - UINT32 age; - BOOL staticEntry; /**< true if this address is static (doesn't age) */ - } filteringData; - - struct - { - UINT32 age; - BOOL staticEntry; - UINT32 ieee802_1qTag; - } filteringVlanData; - - struct - { - IxEthDBWiFiRecordType type; /**< AP_TO_AP (0x1) or AP_TO_STA (0x0) */ - UINT32 gwAddressIndex; /**< used only when linearizing the entries for NPE usage */ - UINT8 gwMacAddress[IX_IEEE803_MAC_ADDRESS_SIZE]; - - __alignment__ UINT8 reserved2[2]; - } wifiData; -} IxEthDBRecordData; - -typedef struct MacDescriptor_t -{ - UINT8 macAddress[IX_IEEE803_MAC_ADDRESS_SIZE]; - - __alignment__ UINT8 reserved1[2]; - - UINT32 portID; - IxEthDBRecordType type; - IxEthDBRecordData recordData; - - /* used for internal operations, such as NPE linearization */ - void *internal; - - /* custom user data */ - void *user; - - __mempool__ struct MacDescriptor_t *nextFree; /**< memory pool management */ - __smartpointer__ UINT32 refCount; /**< smart pointer reference counter */ -} MacDescriptor; - -/** - * hash table definition - */ -typedef struct -{ - HashNode *hashBuckets[NUM_BUCKETS]; - UINT32 numBuckets; - - __lock__ IxOsalFastMutex bucketLocks[NUM_BUCKETS]; - - HashFunction entryHashFunction; - MatchFunction *matchFunctions; - FreeFunction freeFunction; -} HashTable; - -typedef enum -{ - IX_ETH_DB_MAC_KEY = 1, - IX_ETH_DB_MAC_PORT_KEY = 2, - IX_ETH_DB_MAC_VLAN_KEY = 3, - IX_ETH_DB_MAX_KEY_INDEX = 3 -} IxEthDBSearchKeyType; - -typedef struct MacTreeNode_t -{ - __smartpointer__ MacDescriptor *descriptor; - struct MacTreeNode_t *left, *right; - - __mempool__ struct MacTreeNode_t *nextFree; -} MacTreeNode; - -typedef IxEthDBStatus (*IxEthDBPortUpdateHandler)(IxEthDBPortId portID, IxEthDBRecordType type); - -typedef void (*IxEthDBNoteWriteFn)(void *address, MacTreeNode *node); - -typedef struct -{ - BOOL updateEnabled; /**< true if updates are enabled for port */ - BOOL userControlled; /**< true if the user has manually used ixEthDBPortUpdateEnableSet */ - BOOL treeInitialized; /**< true if the NPE has received an initial tree */ - IxEthDBPortUpdateHandler updateHandler; /**< port update handler routine */ - void *npeUpdateZone; /**< port update memory zone */ - void *npeGwUpdateZone; /**< port update memory zone for gateways */ - void *vlanUpdateZone; /**< port update memory zone for VLAN tables */ - MacTreeNode *searchTree; /**< internal search tree, in MacTreeNode representation */ - BOOL searchTreePendingWrite; /**< true if searchTree holds a tree pending write to the port */ -} PortUpdateMethod; - -typedef struct -{ - IxEthDBPortId portID; /**< port ID */ - BOOL enabled; /**< true if the port is enabled */ - BOOL agingEnabled; /**< true if aging on this port is enabled */ - BOOL initialized; - IxEthDBPortMap dependencyPortMap; /**< dependency port map for this port */ - PortUpdateMethod updateMethod; /**< update method structure */ - BOOL macAddressUploaded; /**< true if the MAC address was uploaded into the port */ - UINT32 maxRxFrameSize; /**< maximum Rx frame size for this port */ - UINT32 maxTxFrameSize; /**< maximum Rx frame size for this port */ - - UINT8 bbsid[6]; - __alignment__ UINT8 reserved[2]; - UINT32 frameControlDurationID; /**< Frame Control - Duration/ID WiFi control */ - - IxEthDBVlanTag vlanTag; /**< default VLAN tag for port */ - IxEthDBPriorityTable priorityTable; /**< QoS <=> internal priority mapping */ - IxEthDBVlanSet vlanMembership; - IxEthDBVlanSet transmitTaggingInfo; - IxEthDBFrameFilter frameFilter; - IxEthDBTaggingAction taggingAction; - - UINT32 npeFrameFilter; - UINT32 npeTaggingAction; - - IxEthDBFirewallMode firewallMode; - BOOL srcAddressFilterEnabled; - - BOOL stpBlocked; - - IxEthDBFeature featureCapability; - IxEthDBFeature featureStatus; - - UINT32 ixEthDBTrafficClassAQMAssignments[IX_IEEE802_1Q_QOS_PRIORITY_COUNT]; - - UINT32 ixEthDBTrafficClassCount; - - UINT32 ixEthDBTrafficClassAvailable; - - - - __lock__ IxOsalMutex npeAckLock; -} PortInfo; - -/* list of port information structures indexed on port Ids */ -extern IX_ETH_DB_PUBLIC PortInfo ixEthDBPortInfo[IX_ETH_DB_NUMBER_OF_PORTS]; - -typedef enum -{ - IX_ETH_DB_ADD_FILTERING_RECORD = 0xFF0001, - IX_ETH_DB_REMOVE_FILTERING_RECORD = 0xFF0002 -} PortEventType; - -typedef struct -{ - UINT32 eventType; - IxEthDBPortId portID; - IxEthDBMacAddr macAddr; - BOOL staticEntry; -} PortEvent; - -typedef struct -{ - PortEvent queue[EVENT_QUEUE_SIZE]; - UINT32 base; - UINT32 length; -} PortEventQueue; - -typedef struct -{ - IxEthDBPortId portID; /**< originating port */ - MacDescriptor *macDescriptors[MAX_ELT_SIZE]; /**< addresses to be synced into db */ - UINT32 addressCount; /**< number of addresses */ -} TreeSyncInfo; - -typedef struct -{ - MacTreeNode *nodes[MAX_ELT_SIZE]; - UINT32 offsets[MAX_ELT_SIZE]; - UINT32 nodeCount; -} MacTreeNodeStack; - -/* Prototypes */ - -/* ----------- Memory management -------------- */ - -IX_ETH_DB_PUBLIC void ixEthDBInitMemoryPools(void); - -IX_ETH_DB_PUBLIC HashNode* ixEthDBAllocHashNode(void); -IX_ETH_DB_PUBLIC void ixEthDBFreeHashNode(HashNode *); - -IX_ETH_DB_PUBLIC __smartpointer__ MacDescriptor* ixEthDBAllocMacDescriptor(void); -IX_ETH_DB_PUBLIC __smartpointer__ MacDescriptor* ixEthDBCloneMacDescriptor(MacDescriptor *macDescriptor); -IX_ETH_DB_PUBLIC __smartpointer__ void ixEthDBFreeMacDescriptor(MacDescriptor *); - -IX_ETH_DB_PUBLIC __smartpointer__ MacTreeNode* ixEthDBAllocMacTreeNode(void); -IX_ETH_DB_PUBLIC __smartpointer__ MacTreeNode* ixEthDBCloneMacTreeNode(MacTreeNode *); -IX_ETH_DB_PUBLIC __smartpointer__ void ixEthDBFreeMacTreeNode(MacTreeNode *); - -IX_ETH_DB_PUBLIC void ixEthDBPoolFreeMacTreeNode(MacTreeNode *); -IX_ETH_DB_PUBLIC UINT32 ixEthDBSearchTreeUsageGet(MacTreeNode *tree); -IX_ETH_DB_PUBLIC int ixEthDBShowMemoryStatus(void); - -/* Hash Table */ -IX_ETH_DB_PUBLIC void ixEthDBInitHash(HashTable *hashTable, UINT32 numBuckets, HashFunction entryHashFunction, MatchFunction *matchFunctions, FreeFunction freeFunction); - -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBAddHashEntry(HashTable *hashTable, void *entry); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBRemoveHashEntry(HashTable *hashTable, int keyType, void *reference); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBSearchHashEntry(HashTable *hashTable, int keyType, void *reference, HashNode **searchResult); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPeekHashEntry(HashTable *hashTable, int keyType, void *reference); -IX_ETH_DB_PUBLIC void ixEthDBReleaseHashNode(HashNode *node); - -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBInitHashIterator(HashTable *hashTable, HashIterator *iterator); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBIncrementHashIterator(HashTable *hashTable, HashIterator *iterator); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBRemoveEntryAtHashIterator(HashTable *hashTable, HashIterator *iterator); -IX_ETH_DB_PUBLIC void ixEthDBReleaseHashIterator(HashIterator *iterator); - -/* API Support */ -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); -IX_ETH_DB_PUBLIC void ixEthDBMaximumFrameSizeAckCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg); - -/* DB Core functions */ -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBInit(void); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBAdd(MacDescriptor *newRecordTemplate, IxEthDBPortMap updateTrigger); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBRemove(MacDescriptor *templateRecord, IxEthDBPortMap updateTrigger); -IX_ETH_DB_PUBLIC HashNode* ixEthDBSearch(IxEthDBMacAddr *macAddress, IxEthDBRecordType typeFilter); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPeek(IxEthDBMacAddr *macAddress, IxEthDBRecordType typeFilter); - -/* Learning support */ -IX_ETH_DB_PUBLIC UINT32 ixEthDBAddressCompare(UINT8 *mac1, UINT8 *mac2); -IX_ETH_DB_PUBLIC BOOL ixEthDBAddressMatch(void *reference, void *entry); -IX_ETH_DB_PUBLIC UINT32 ixEthDBEntryXORHash(void *macDescriptor); -IX_ETH_DB_PUBLIC UINT32 ixEthDBKeyXORHash(void *macAddress); - -/* Port updates */ -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBNPEUpdateHandler(IxEthDBPortId portID, IxEthDBRecordType type); -IX_ETH_DB_PUBLIC void ixEthDBUpdatePortLearningTrees(IxEthDBPortMap triggerPorts); -IX_ETH_DB_PUBLIC void ixEthDBNPEAccessRequest(IxEthDBPortId portID); -IX_ETH_DB_PUBLIC void ixEthDBUpdateLock(void); -IX_ETH_DB_PUBLIC void ixEthDBUpdateUnlock(void); -IX_ETH_DB_PUBLIC MacTreeNode* ixEthDBQuery(MacTreeNode *searchTree, IxEthDBPortMap query, IxEthDBRecordType recordFilter, UINT32 maximumEntries); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBFirewallUpdate(IxEthDBPortId portID, void *address, UINT32 epDelta); - -/* Init/unload */ -IX_ETH_DB_PUBLIC void ixEthDBPortSetAckCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBEventProcessorInit(void); -IX_ETH_DB_PUBLIC void ixEthDBPortInit(IxEthDBPortId portID); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID); -IX_ETH_DB_PUBLIC void ixEthDBNPEUpdateAreasInit(void); -IX_ETH_DB_PUBLIC UINT32 ixEthDBMatchMethodsRegister(MatchFunction *matchFunctions); -IX_ETH_DB_PUBLIC UINT32 ixEthDBRecordSerializeMethodsRegister(void); -IX_ETH_DB_PUBLIC UINT32 ixEthDBUpdateTypeRegister(BOOL *typeArray); -IX_ETH_DB_PUBLIC void ixEthDBNPEUpdateAreasUnload(void); -IX_ETH_DB_PUBLIC void ixEthDBFeatureCapabilityScan(void); -IX_ETH_DB_PUBLIC UINT32 ixEthDBKeyTypeRegister(UINT32 *keyType); - -/* Event processing */ -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBDefaultEventCallbackEnable(IxEthDBPortId portID, BOOL enable); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBTriggerAddPortUpdate(IxEthDBMacAddr *macAddr, IxEthDBPortId portID, BOOL staticEntry); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBTriggerRemovePortUpdate(IxEthDBMacAddr *macAddr, IxEthDBPortId portID); -IX_ETH_DB_PUBLIC void ixEthDBNPEEventCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg); - -/* NPE adaptor */ -IX_ETH_DB_PUBLIC void ixEthDBGetMacDatabaseCbk(IxNpeMhNpeId npeID, IxNpeMhMessage msg); -IX_ETH_DB_PUBLIC void ixEthDBNpeMsgAck(IxNpeMhNpeId npeID, IxNpeMhMessage msg); -IX_ETH_DB_PUBLIC void ixEthDBNPESyncScan(IxEthDBPortId portID, void *eltBaseAddress, UINT32 eltSize); -IX_ETH_DB_PUBLIC void ixEthDBNPETreeWrite(IxEthDBRecordType type, UINT32 totalSize, void *baseAddress, MacTreeNode *tree, UINT32 *blocks, UINT32 *startIndex); -IX_ETH_DB_PUBLIC void ixEthDBNPEGatewayNodeWrite(void *address, MacTreeNode *node); - -/* Other public API functions */ -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBStartLearningFunction(void); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBStopLearningFunction(void); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortUpdateEnableSet(IxEthDBPortId portID, BOOL enableUpdate); - -/* Maximum Tx/Rx public functions */ -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBFilteringPortMaximumRxFrameSizeSet(IxEthDBPortId portID, UINT32 maximumRxFrameSize); -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBFilteringPortMaximumTxFrameSizeSet(IxEthDBPortId portID, UINT32 maximumTxFrameSize); - -/* VLAN-related */ -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortVlanTableSet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet); - -/* Record search */ -IX_ETH_DB_PUBLIC BOOL ixEthDBAddressRecordMatch(void *untypedReference, void *untypedEntry); -IX_ETH_DB_PUBLIC BOOL ixEthDBVlanRecordMatch(void *untypedReference, void *untypedEntry); -IX_ETH_DB_PUBLIC BOOL ixEthDBPortRecordMatch(void *untypedReference, void *untypedEntry); -IX_ETH_DB_PUBLIC BOOL ixEthDBNullMatch(void *reference, void *entry); -IX_ETH_DB_PUBLIC HashNode* ixEthDBPortSearch(IxEthDBMacAddr *macAddress, IxEthDBPortId portID, IxEthDBRecordType typeFilter); -IX_ETH_DB_PUBLIC HashNode* ixEthDBVlanSearch(IxEthDBMacAddr *macAddress, IxEthDBVlanId vlanID, IxEthDBRecordType typeFilter); - -/* Utilities */ -IX_ETH_DB_PUBLIC const char* mac2string(const unsigned char *mac); -IX_ETH_DB_PUBLIC void showHashInfo(void); -IX_ETH_DB_PUBLIC int ixEthDBAnalyzeHash(void); -IX_ETH_DB_PUBLIC const char* errorString(IxEthDBStatus error); -IX_ETH_DB_PUBLIC int numHashElements(void); -IX_ETH_DB_PUBLIC void zapHashtable(void); -IX_ETH_DB_PUBLIC BOOL ixEthDBCheckSingleBitValue(UINT32 value); - -/* Single Eth NPE Check */ -IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBSingleEthNpeCheck(IxEthDBPortId portId); - -#endif /* IxEthDB_p_H */ - diff --git a/drivers/net/npe/include/IxEthMii.h b/drivers/net/npe/include/IxEthMii.h deleted file mode 100644 index 8d7de3d4ce..0000000000 --- a/drivers/net/npe/include/IxEthMii.h +++ /dev/null @@ -1,246 +0,0 @@ -/** - * @file IxEthMii.h - * - * @brief this file contains the public API of @ref IxEthMii component - * - * Design notes : - * The main intent of this API is to inplement MII high level fonctionalitoes - * to support the codelets provided with the IXP400 software releases. It - * superceedes previous interfaces provided with @ref IxEThAcc component. - * - * This API has been tested with the PHYs provided with the - * IXP400 development platforms. It may not work for specific Ethernet PHYs - * used on specific boards. - * - * This source code detects and interface the LXT972, LXT973 and KS6995 - * Ethernet PHYs. - * - * This source code should be considered as an example which may need - * to be adapted for different hardware implementations. - * - * It is strongly recommended to use public domain and GPL utilities - * like libmii, mii-diag for MII interface support. - * - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#ifndef IxEthMii_H -#define IxEthMii_H - -#include - -/** - * @defgroup IxEthMii IXP400 Ethernet Phy Access (IxEthMii) API - * - * @brief ethMii is a library that does provides access to the - * Ethernet PHYs - * - *@{ - */ - -/** - * @ingroup IxEthMii - * - * @fn ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount) - * - * @brief Scan the MDIO bus for PHYs - * This function scans PHY addresses 0 through 31, and sets phyPresent[n] to - * true if a phy is discovered at address n. - * - * - Reentrant - no - * - ISR Callable - no - * - * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. - * - * @param phyPresent BOOL [in] - boolean array of IXP425_ETH_ACC_MII_MAX_ADDR entries - * @param maxPhyCount UINT32 [in] - number of PHYs to search for (the scan will stop when - * the indicated number of PHYs is found). - * - * @return IX_STATUS - * - IX_ETH_ACC_SUCCESS - * - IX_ETH_ACC_FAIL : invalid arguments. - * - *
- */ -PUBLIC IX_STATUS ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount); - -/** - * @ingroup IxEthMii - * - * @fn ixEthMiiPhyConfig(UINT32 phyAddr, - BOOL speed100, - BOOL fullDuplex, - BOOL autonegotiate) - * - * - * @brief Configure a PHY - * Configure a PHY's speed, duplex and autonegotiation status - * - * - Reentrant - no - * - ISR Callable - no - * - * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. - * - * @param phyAddr UINT32 [in] - * @param speed100 BOOL [in] - set to true for 100Mbit/s operation, false for 10Mbit/s - * @param fullDuplex BOOL [in] - set to true for Full Duplex, false for Half Duplex - * @param autonegotiate BOOL [in] - set to true to enable autonegotiation - * - * @return IX_STATUS - * - IX_SUCCESS - * - IX_FAIL : invalid arguments. - * - *
- */ -PUBLIC IX_STATUS ixEthMiiPhyConfig(UINT32 phyAddr, - BOOL speed100, - BOOL fullDuplex, - BOOL autonegotiate); - -/** - * @ingroup IxEthMii - * - * @fn ixEthMiiPhyLoopbackEnable(UINT32 phyAddr) - * - * - * @brief Enable PHY Loopback in a specific Eth MII port - * - * @note When PHY Loopback is enabled, frames sent out to the PHY from the - * IXP400 will be looped back to the IXP400. They will not be transmitted out - * on the wire. - * - * - Reentrant - no - * - ISR Callable - no - * - * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31) - * - * @return IX_STATUS - * - IX_SUCCESS - * - IX_FAIL : invalid arguments. - *
- */ -PUBLIC IX_STATUS -ixEthMiiPhyLoopbackEnable (UINT32 phyAddr); - -/** - * @ingroup IxEthMii - * - * @fn ixEthMiiPhyLoopbackDisable(UINT32 phyAddr) - * - * - * @brief Disable PHY Loopback in a specific Eth MII port - * - * - Reentrant - no - * - ISR Callable - no - * - * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31) - * - * @return IX_STATUS - * - IX_SUCCESS - * - IX_FAIL : invalid arguments. - *
- */ -PUBLIC IX_STATUS -ixEthMiiPhyLoopbackDisable (UINT32 phyAddr); - -/** - * @ingroup IxEthMii - * - * @fn ixEthMiiPhyReset(UINT32 phyAddr) - * - * @brief Reset a PHY - * Reset a PHY - * - * - Reentrant - no - * - ISR Callable - no - * - * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. - * - * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31) - * - * @return IX_STATUS - * - IX_SUCCESS - * - IX_FAIL : invalid arguments. - * - *
- */ -PUBLIC IX_STATUS ixEthMiiPhyReset(UINT32 phyAddr); - - -/** - * @ingroup IxEthMii - * - * @fn ixEthMiiLinkStatus(UINT32 phyAddr, - BOOL *linkUp, - BOOL *speed100, - BOOL *fullDuplex, - BOOL *autoneg) - * - * @brief Retrieve the current status of a PHY - * Retrieve the link, speed, duplex and autonegotiation status of a PHY - * - * - Reentrant - no - * - ISR Callable - no - * - * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. - * - * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31) - * @param linkUp BOOL [out] - set to true if the link is up - * @param speed100 BOOL [out] - set to true indicates 100Mbit/s, false indicates 10Mbit/s - * @param fullDuplex BOOL [out] - set to true indicates Full Duplex, false indicates Half Duplex - * @param autoneg BOOL [out] - set to true indicates autonegotiation is enabled, false indicates autonegotiation is disabled - * - * @return IX_STATUS - * - IX_SUCCESS - * - IX_FAIL : invalid arguments. - * - *
- */ -PUBLIC IX_STATUS ixEthMiiLinkStatus(UINT32 phyAddr, - BOOL *linkUp, - BOOL *speed100, - BOOL *fullDuplex, - BOOL *autoneg); - -/** - * @ingroup IxEthMii - * - * @fn ixEthMiiPhyShow (UINT32 phyAddr) - * - * - * @brief Display information on a specified PHY - * Display link status, speed, duplex and Auto Negotiation status - * - * - Reentrant - no - * - ISR Callable - no - * - * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. - * - * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31) - * - * @return IX_STATUS - * - IX_SUCCESS - * - IX_FAIL : invalid arguments. - * - *
- */ -PUBLIC IX_STATUS ixEthMiiPhyShow (UINT32 phyAddr); - -#endif /* ndef IxEthMii_H */ -/** - *@} - */ diff --git a/drivers/net/npe/include/IxEthMii_p.h b/drivers/net/npe/include/IxEthMii_p.h deleted file mode 100644 index 0c48a6971a..0000000000 --- a/drivers/net/npe/include/IxEthMii_p.h +++ /dev/null @@ -1,161 +0,0 @@ -/** - * @file IxEthMii_p.h - * - * @author Intel Corporation - * @date - * - * @brief MII Header file - * - * Design Notes: - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#ifndef IxEthMii_p_H -#define IxEthMii_p_H - - -/* MII definitions - these have been verified against the LXT971 and - LXT972 PHYs*/ - -#define IX_ETH_MII_MAX_REG_NUM 0x20 /* max number of registers */ - -#define IX_ETH_MII_CTRL_REG 0x0 /* Control Register */ -#define IX_ETH_MII_STAT_REG 0x1 /* Status Register */ -#define IX_ETH_MII_PHY_ID1_REG 0x2 /* PHY identifier 1 Register */ -#define IX_ETH_MII_PHY_ID2_REG 0x3 /* PHY identifier 2 Register */ -#define IX_ETH_MII_AN_ADS_REG 0x4 /* Auto-Negotiation */ - /* Advertisement Register */ -#define IX_ETH_MII_AN_PRTN_REG 0x5 /* Auto-Negotiation */ - /* partner ability Register */ -#define IX_ETH_MII_AN_EXP_REG 0x6 /* Auto-Negotiation */ - /* Expansion Register */ -#define IX_ETH_MII_AN_NEXT_REG 0x7 /* Auto-Negotiation */ - /* next-page transmit Register */ - -#define IX_ETH_MII_STAT2_REG 0x11 /* Status Register 2*/ - - -/* MII control register bit */ - -#define IX_ETH_MII_CR_COLL_TEST 0x0080 /* collision test */ -#define IX_ETH_MII_CR_FDX 0x0100 /* FDX =1, half duplex =0 */ -#define IX_ETH_MII_CR_RESTART 0x0200 /* restart auto negotiation */ -#define IX_ETH_MII_CR_ISOLATE 0x0400 /* isolate PHY from MII */ -#define IX_ETH_MII_CR_POWER_DOWN 0x0800 /* power down */ -#define IX_ETH_MII_CR_AUTO_EN 0x1000 /* auto-negotiation enable */ -#define IX_ETH_MII_CR_100 0x2000 /* 0 = 10mb, 1 = 100mb */ -#define IX_ETH_MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define IX_ETH_MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ -#define IX_ETH_MII_CR_NORM_EN 0x0000 /* just enable the PHY */ -#define IX_ETH_MII_CR_DEF_0_MASK 0xca7f /* they must return zero */ -#define IX_ETH_MII_CR_RES_MASK 0x007f /* reserved bits, return zero */ - -/* MII Status register bit definitions */ - -#define IX_ETH_MII_SR_LINK_STATUS 0x0004 /* link Status -- 1 = link */ -#define IX_ETH_MII_SR_AUTO_SEL 0x0008 /* auto speed select capable */ -#define IX_ETH_MII_SR_REMOTE_FAULT 0x0010 /* Remote fault detect */ -#define IX_ETH_MII_SR_AUTO_NEG 0x0020 /* auto negotiation complete */ -#define IX_ETH_MII_SR_10T_HALF_DPX 0x0800 /* 10BaseT HD capable */ -#define IX_ETH_MII_SR_10T_FULL_DPX 0x1000 /* 10BaseT FD capable */ -#define IX_ETH_MII_SR_TX_HALF_DPX 0x2000 /* TX HD capable */ -#define IX_ETH_MII_SR_TX_FULL_DPX 0x4000 /* TX FD capable */ -#define IX_ETH_MII_SR_T4 0x8000 /* T4 capable */ -#define IX_ETH_MII_SR_ABIL_MASK 0xff80 /* abilities mask */ -#define IX_ETH_MII_SR_EXT_CAP 0x0001 /* extended capabilities */ - - -/* LXT971/2 Status 2 register bit definitions */ -#define IX_ETH_MII_SR2_100 0x4000 -#define IX_ETH_MII_SR2_TX 0x2000 -#define IX_ETH_MII_SR2_RX 0x1000 -#define IX_ETH_MII_SR2_COL 0x0800 -#define IX_ETH_MII_SR2_LINK 0x0400 -#define IX_ETH_MII_SR2_FD 0x0200 -#define IX_ETH_MII_SR2_AUTO 0x0100 -#define IX_ETH_MII_SR2_AUTO_CMPLT 0x0080 -#define IX_ETH_MII_SR2_POLARITY 0x0020 -#define IX_ETH_MII_SR2_PAUSE 0x0010 -#define IX_ETH_MII_SR2_ERROR 0x0008 - -/* MII Link Code word bit definitions */ - -#define IX_ETH_MII_BP_FAULT 0x2000 /* remote fault */ -#define IX_ETH_MII_BP_ACK 0x4000 /* acknowledge */ -#define IX_ETH_MII_BP_NP 0x8000 /* nexp page is supported */ - -/* MII Next Page bit definitions */ - -#define IX_ETH_MII_NP_TOGGLE 0x0800 /* toggle bit */ -#define IX_ETH_MII_NP_ACK2 0x1000 /* acknowledge two */ -#define IX_ETH_MII_NP_MSG 0x2000 /* message page */ -#define IX_ETH_MII_NP_ACK1 0x4000 /* acknowledge one */ -#define IX_ETH_MII_NP_NP 0x8000 /* nexp page will follow */ - -/* MII Expansion Register bit definitions */ - -#define IX_ETH_MII_EXP_FAULT 0x0010 /* parallel detection fault */ -#define IX_ETH_MII_EXP_PRTN_NP 0x0008 /* link partner next-page able */ -#define IX_ETH_MII_EXP_LOC_NP 0x0004 /* local PHY next-page able */ -#define IX_ETH_MII_EXP_PR 0x0002 /* full page received */ -#define IX_ETH_MII_EXP_PRT_AN 0x0001 /* link partner auto neg able */ - -/* technology ability field bit definitions */ - -#define IX_ETH_MII_TECH_10BASE_T 0x0020 /* 10Base-T */ -#define IX_ETH_MII_TECH_10BASE_FD 0x0040 /* 10Base-T Full Duplex */ -#define IX_ETH_MII_TECH_100BASE_TX 0x0080 /* 100Base-TX */ -#define IX_ETH_MII_TECH_100BASE_TX_FD 0x0100 /* 100Base-TX Full Duplex */ - -#define IX_ETH_MII_TECH_100BASE_T4 0x0200 /* 100Base-T4 */ -#define IX_ETH_MII_ADS_TECH_MASK 0x1fe0 /* technology abilities mask */ -#define IX_ETH_MII_TECH_MASK IX_ETH_MII_ADS_TECH_MASK -#define IX_ETH_MII_ADS_SEL_MASK 0x001f /* selector field mask */ - -#define IX_ETH_MII_AN_FAIL 0x10 /* auto-negotiation fail */ -#define IX_ETH_MII_STAT_FAIL 0x20 /* errors in the status register */ -#define IX_ETH_MII_PHY_NO_ABLE 0x40 /* the PHY lacks some abilities */ - -/* Definitions for MII access routines*/ - -#define IX_ETH_MII_GO BIT(31) -#define IX_ETH_MII_WRITE BIT(26) -#define IX_ETH_MII_TIMEOUT_10TH_SECS (5) -#define IX_ETH_MII_10TH_SEC_IN_MILLIS (100) -#define IX_ETH_MII_READ_FAIL BIT(31) - -/* When we reset the PHY we delay for 2 seconds to allow the reset to - complete*/ -#define IX_ETH_MII_RESET_DELAY_MS (2000) -#define IX_ETH_MII_RESET_POLL_MS (50) - -#define IX_ETH_MII_REG_SHL 16 -#define IX_ETH_MII_ADDR_SHL 21 - -/* supported PHYs */ -#define IX_ETH_MII_LXT971_PHY_ID 0x001378E0 -#define IX_ETH_MII_LXT972_PHY_ID 0x001378E2 -#define IX_ETH_MII_LXT973_PHY_ID 0x00137A10 -#define IX_ETH_MII_LXT973A3_PHY_ID 0x00137A11 -#define IX_ETH_MII_KS8995_PHY_ID 0x00221450 -#define IX_ETH_MII_LXT9785_PHY_ID 0x001378FF - - -#define IX_ETH_MII_INVALID_PHY_ID 0x00000000 -#define IX_ETH_MII_UNKNOWN_PHY_ID 0xffffffff - -#endif /*IxEthAccMii_p_H*/ diff --git a/drivers/net/npe/include/IxEthNpe.h b/drivers/net/npe/include/IxEthNpe.h deleted file mode 100644 index 20bfa76c36..0000000000 --- a/drivers/net/npe/include/IxEthNpe.h +++ /dev/null @@ -1,671 +0,0 @@ -#ifndef __doxygen_HIDE /* This file is not part of the API */ - -/** - * @file IxEthNpe.h - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/** - * @defgroup IxEthNpe IXP400 Ethernet NPE (IxEthNpe) API - * - * @brief Contains the API for Ethernet NPE. - * - * All messages given to NPE, get back an acknowledgment. The acknowledgment - * is identical to the message sent to the NPE (except for NPE_GETSTATUS message). - * - * @{ - */ - - -/*-------------------------------------------------------------------------- - * APB Message IDs - XScale->NPE - *------------------------------------------------------------------------*/ - -/** - * @def IX_ETHNPE_NPE_GETSTATUS - * - * @brief Request from the XScale client for the NPE to return the firmware - * version of the currently executing image. - * - * Acknowledgment message id is same as the request message id. - * NPE returns the firmware version ID to XScale. - */ -#define IX_ETHNPE_NPE_GETSTATUS 0x00 - -/** - * @def IX_ETHNPE_EDB_SETPORTADDRESS - * - * @brief Request from the XScale client for the NPE to set the Ethernet - * port's port ID and MAC address. - */ -#define IX_ETHNPE_EDB_SETPORTADDRESS 0x01 - -/** - * @def IX_ETHNPE_EDB_GETMACADDRESSDATABASE - * - * @brief Request from XScale client to the NPE requesting upload of - * Ethernet Filtering Database or Header Conversion Database from NPE's - * data memory to XScale accessible SDRAM. - */ -#define IX_ETHNPE_EDB_GETMACADDRESSDATABASE 0x02 - -/** - * @def IX_ETHNPE_EDB_SETMACADDRESSSDATABASE - * - * @brief Request from XScale client to the NPE requesting download of - * Ethernet Filtering Database or Header Conversion Database from SDRAM - * to the NPE's datamemory. - */ -#define IX_ETHNPE_EDB_SETMACADDRESSSDATABASE 0x03 - -/** - * @def IX_ETHNPE_GETSTATS - * - * @brief Request from the XScale client for the current MAC port statistics - * data to be written to the (empty) statistics structure and the specified - * location in externa memory. - */ -#define IX_ETHNPE_GETSTATS 0x04 - -/** - * @def IX_ETHNPE_RESETSTATS - * - * @brief Request from the XScale client to the NPE to reset all of its internal - * MAC port statistics state variables. - * - * As a side effect, this message entails an implicit request that the NPE - * write the current MAC port statistics into the MAC statistics structure - * at the specified location in external memory. - */ -#define IX_ETHNPE_RESETSTATS 0x05 - -/** - * @def IX_ETHNPE_SETMAXFRAMELENGTHS - * - * @brief Request from the XScale client to the NPE to configure maximum framelengths - * and block sizes in receive and transmit direction. - */ -#define IX_ETHNPE_SETMAXFRAMELENGTHS 0x06 - -/** - * @def IX_ETHNPE_VLAN_SETRXTAGMODE - * - * @brief Request from the XScale client to the NPE to configure VLAN frame type - * filtering and VLAN the tagging mode for the receiver. - */ -#define IX_ETHNPE_VLAN_SETRXTAGMODE 0x07 - -/** - * @def IX_ETHNPE_VLAN_SETDEFAULTRXVID - * - * @brief Request from the XScale client to the NPE to set receiver's default - * VLAN tag (PVID)and internal traffic class. - */ -#define IX_ETHNPE_VLAN_SETDEFAULTRXVID 0x08 - -/** - * @def IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY - * - * @brief Request from the XScale client to the NPE to configure VLAN Port - * membership and Tx tagging for 8 consecutive VLANID's. - */ -#define IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY 0x09 - -/** - * @def IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE - * - * @brief Request from the XScale client to the NPE to configure VLAN Port - * membership and Tx tagging for a range of VLANID's. - */ -#define IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE 0x0A - -/** - * @def IX_ETHNPE_VLAN_SETRXQOSENTRY - * - * @brief Request from the XScale client to the NPE to map a user priority - * to QoS class and an AQM queue number. - */ -#define IX_ETHNPE_VLAN_SETRXQOSENTRY 0x0B - -/** - * @def IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE - * - * @brief Request from the XScale client to the NPE to enable or disable - * portID extraction from VLAN-tagged frames for the specified port. - */ -#define IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE 0x0C - -/** - * @def IX_ETHNPE_STP_SETBLOCKINGSTATE - * - * @brief Request from the XScale client to the NPE to block or unblock - * forwarding for spanning tree BPDUs. - */ -#define IX_ETHNPE_STP_SETBLOCKINGSTATE 0x0D - -/** - * @def IX_ETHNPE_FW_SETFIREWALLMODE - * - * @brief Request from the XScale client to the NPE to configure firewall - * services modes of operation and/or download Ethernet Firewall Database from - * SDRAM to NPE. - */ -#define IX_ETHNPE_FW_SETFIREWALLMODE 0x0E - -/** - * @def IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID - * - * @brief Request from the XScale client to the NPE to set global frame control - * and duration/ID field for the 802.3 to 802.11 protocol header conversion - * service. - */ -#define IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID 0x0F - -/** - * @def IX_ETHNPE_PC_SETBBSID - * - * @brief Request from the XScale client to the NPE to set global BBSID field - * value for the 802.3 to 802.11 protocol header conversion service. - */ -#define IX_ETHNPE_PC_SETBBSID 0x10 - -/** - * @def IX_ETHNPE_PC_SETAPMACTABLE - * - * @brief Request from the XScale client to the NPE to update a block/section/ - * range of the AP MAC Address Table. - */ -#define IX_ETHNPE_PC_SETAPMACTABLE 0x11 - -/** - * @def IX_ETHNPE_SETLOOPBACK_MODE - * - * @brief Turn on or off the NPE frame loopback. - */ -#define IX_ETHNPE_SETLOOPBACK_MODE (0x12) - -/*-------------------------------------------------------------------------- - * APB Message IDs - NPE->XScale - *------------------------------------------------------------------------*/ - -/** - * @def IX_ETHNPE_NPE_GETSTATUS_ACK - * - * @brief Acknowledgment to IX_ETHNPE_NPE_GETSTATUS message. NPE firmware version - * id is returned in the message. - */ -#define IX_ETHNPE_NPE_GETSTATUS_ACK 0x00 - -/** - * @def IX_ETHNPE_EDB_SETPORTADDRESS_ACK - * - * @brief Acknowledgment to IX_ETHNPE_EDB_SETPORTADDRESS message. - */ -#define IX_ETHNPE_EDB_SETPORTADDRESS_ACK 0x01 - -/** - * @def IX_ETHNPE_EDB_GETMACADDRESSDATABASE_ACK - * - * @brief Acknowledgment to IX_ETHNPE_EDB_GETMACADDRESSDATABASE message - */ -#define IX_ETHNPE_EDB_GETMACADDRESSDATABASE_ACK 0x02 - -/** - * @def IX_ETHNPE_EDB_SETMACADDRESSSDATABASE_ACK - * - * @brief Acknowledgment to IX_ETHNPE_EDB_SETMACADDRESSSDATABASE message. - */ -#define IX_ETHNPE_EDB_SETMACADDRESSSDATABASE_ACK 0x03 - -/** - * @def IX_ETHNPE_GETSTATS_ACK - * - * @brief Acknowledgment to IX_ETHNPE_GETSTATS message. - */ -#define IX_ETHNPE_GETSTATS_ACK 0x04 - -/** - * @def IX_ETHNPE_RESETSTATS_ACK - * - * @brief Acknowledgment to IX_ETHNPE_RESETSTATS message. - */ -#define IX_ETHNPE_RESETSTATS_ACK 0x05 - -/** - * @def IX_ETHNPE_SETMAXFRAMELENGTHS_ACK - * - * @brief Acknowledgment to IX_ETHNPE_SETMAXFRAMELENGTHS message. - */ -#define IX_ETHNPE_SETMAXFRAMELENGTHS_ACK 0x06 - -/** - * @def IX_ETHNPE_VLAN_SETRXTAGMODE_ACK - * - * @brief Acknowledgment to IX_ETHNPE_VLAN_SETRXTAGMODE message. - */ -#define IX_ETHNPE_VLAN_SETRXTAGMODE_ACK 0x07 - -/** - * @def IX_ETHNPE_VLAN_SETDEFAULTRXVID_ACK - * - * @brief Acknowledgment to IX_ETHNPE_VLAN_SETDEFAULTRXVID message. - */ -#define IX_ETHNPE_VLAN_SETDEFAULTRXVID_ACK 0x08 - -/** - * @def IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY_ACK - * - * @brief Acknowledgment to IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY message. - */ -#define IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY_ACK 0x09 - -/** - * @def IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE_ACK - * - * @brief Acknowledgment to IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE message. - */ -#define IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE_ACK 0x0A - -/** - * @def IX_ETHNPE_VLAN_SETRXQOSENTRY_ACK - * - * @brief Acknowledgment to IX_ETHNPE_VLAN_SETRXQOSENTRY message. - */ -#define IX_ETHNPE_VLAN_SETRXQOSENTRY_ACK 0x0B - -/** - * @def IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE_ACK - * - * @brief Acknowledgment to IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE message. - */ -#define IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE_ACK 0x0C - -/** - * @def IX_ETHNPE_STP_SETBLOCKINGSTATE_ACK - * - * @brief Acknowledgment to IX_ETHNPE_STP_SETBLOCKINGSTATE message. - */ -#define IX_ETHNPE_STP_SETBLOCKINGSTATE_ACK 0x0D - -/** - * @def IX_ETHNPE_FW_SETFIREWALLMODE_ACK - * - * @brief Acknowledgment to IX_ETHNPE_FW_SETFIREWALLMODE message. - */ -#define IX_ETHNPE_FW_SETFIREWALLMODE_ACK 0x0E - -/** - * @def IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID_ACK - * - * @brief Acknowledgment to IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID message. - */ -#define IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID_ACK 0x0F - -/** - * @def IX_ETHNPE_PC_SETBBSID_ACK - * - * @brief Acknowledgment to IX_ETHNPE_PC_SETBBSID message. - */ -#define IX_ETHNPE_PC_SETBBSID_ACK 0x10 - -/** - * @def IX_ETHNPE_PC_SETAPMACTABLE_ACK - * - * @brief Acknowledgment to IX_ETHNPE_PC_SETAPMACTABLE message. - */ -#define IX_ETHNPE_PC_SETAPMACTABLE_ACK 0x11 - -/** - * @def IX_ETHNPE_SETLOOPBACK_MODE_ACK - * - * @brief Acknowledgment to IX_ETHNPE_SETLOOPBACK_MODE message. - */ -#define IX_ETHNPE_SETLOOPBACK_MODE_ACK (0x12) - -/*-------------------------------------------------------------------------- - * Queue Manager Queue entry bit field boundary definitions - *------------------------------------------------------------------------*/ - -/** - * @def MASK(hi,lo) - * - * @brief Macro for mask - */ -#define MASK(hi,lo) (((1 << (1 + ((hi) - (lo)))) - 1) << (lo)) - -/** - * @def BITS(x,hi,lo) - * - * @brief Macro for bits - */ -#define BITS(x,hi,lo) (((x) & MASK(hi,lo)) >> (lo)) - -/** - * @def IX_ETHNPE_QM_Q_RXENET_LENGTH_MASK - * - * @brief QMgr Queue LENGTH field mask - */ -#define IX_ETHNPE_QM_Q_RXENET_LENGTH_MASK 0x3fff - -/** - * @def IX_ETHNPE_QM_Q_FIELD_FLAG_R - * - * @brief QMgr Queue FLAG field right boundary - */ -#define IX_ETHNPE_QM_Q_FIELD_FLAG_R 20 - -/** - * @def IX_ETHNPE_QM_Q_FIELD_FLAG_MASK - * - * @brief QMgr Queue FLAG field mask - * - * Multicast bit : BIT(4) - * Broadcast bit : BIT(5) - * IP bit : BIT(6) (linux only) - * - */ -#ifdef __vxworks -#define IX_ETHNPE_QM_Q_FIELD_FLAG_MASK 0x30 -#else -#define IX_ETHNPE_QM_Q_FIELD_FLAG_MASK 0x70 -#endif - - -/** - * @def IX_ETHNPE_QM_Q_FIELD_NPEID_L - * - * @brief QMgr Queue NPE ID field left boundary - */ -#define IX_ETHNPE_QM_Q_FIELD_NPEID_L 1 - -/** - * @def IX_ETHNPE_QM_Q_FIELD_NPEID_R - * - * @brief QMgr Queue NPE ID field right boundary - */ -#define IX_ETHNPE_QM_Q_FIELD_NPEID_R 0 - -/** - * @def IX_ETHNPE_QM_Q_FIELD_PRIOR_L - * - * @brief QMgr Queue Priority field left boundary - */ -#define IX_ETHNPE_QM_Q_FIELD_PRIOR_L 2 - -/** - * @def IX_ETHNPE_QM_Q_FIELD_PRIOR_R - * - * @brief QMgr Queue Priority field right boundary - */ -#define IX_ETHNPE_QM_Q_FIELD_PRIOR_R 0 - -/** - * @def IX_ETHNPE_QM_Q_FIELD_ADDR_L - * - * @brief QMgr Queue Address field left boundary - */ -#define IX_ETHNPE_QM_Q_FIELD_ADDR_L 31 - -/** - * @def IX_ETHNPE_QM_Q_FIELD_ADDR_R - * - * @brief QMgr Queue Address field right boundary - */ -#define IX_ETHNPE_QM_Q_FIELD_ADDR_R 5 - -/*-------------------------------------------------------------------------- - * Queue Manager Queue entry bit field masks - *------------------------------------------------------------------------*/ - -/** - * @def IX_ETHNPE_QM_Q_FREEENET_ADDR_MASK - * - * @brief Macro to mask the Address field of the FreeEnet Queue Manager Entry - */ -#define IX_ETHNPE_QM_Q_FREEENET_ADDR_MASK \ - MASK (IX_ETHNPE_QM_Q_FIELD_ADDR_L, \ - IX_ETHNPE_QM_Q_FIELD_ADDR_R) - -/** - * @def IX_ETHNPE_QM_Q_RXENET_NPEID_MASK - * - * @brief Macro to mask the NPE ID field of the RxEnet Queue Manager Entry - */ -#define IX_ETHNPE_QM_Q_RXENET_NPEID_MASK \ - MASK (IX_ETHNPE_QM_Q_FIELD_NPEID_L, \ - IX_ETHNPE_QM_Q_FIELD_NPEID_R) - -/** - * @def IX_ETHNPE_QM_Q_RXENET_ADDR_MASK - * - * @brief Macro to mask the Mbuf Address field of the RxEnet Queue Manager Entry - */ -#define IX_ETHNPE_QM_Q_RXENET_ADDR_MASK \ - MASK (IX_ETHNPE_QM_Q_FIELD_ADDR_L, \ - IX_ETHNPE_QM_Q_FIELD_ADDR_R) - -/** - * @def IX_ETHNPE_QM_Q_TXENET_PRIOR_MASK - * - * @brief Macro to mask the Priority field of the TxEnet Queue Manager Entry - */ -#define IX_ETHNPE_QM_Q_TXENET_PRIOR_MASK \ - MASK (IX_ETHNPE_QM_Q_FIELD_PRIOR_L, \ - IX_ETHNPE_QM_Q_FIELD_PRIOR_R) - -/** - * @def IX_ETHNPE_QM_Q_TXENET_ADDR_MASK - * - * @brief Macro to mask the Mbuf Address field of the TxEnet Queue Manager Entry - */ -#define IX_ETHNPE_QM_Q_TXENET_ADDR_MASK \ - MASK (IX_ETHNPE_QM_Q_FIELD_ADDR_L, \ - IX_ETHNPE_QM_Q_FIELD_ADDR_R) - -/** - * @def IX_ETHNPE_QM_Q_TXENETDONE_NPEID_MASK - * - * @brief Macro to mask the NPE ID field of the TxEnetDone Queue Manager Entry - */ -#define IX_ETHNPE_QM_Q_TXENETDONE_NPEID_MASK \ - MASK (IX_ETHNPE_QM_Q_FIELD_NPEID_L, \ - IX_ETHNPE_QM_Q_FIELD_NPEID_R) - -/** - * @def IX_ETHNPE_QM_Q_TXENETDONE_ADDR_MASK - * - * @brief Macro to mask the Mbuf Address field of the TxEnetDone Queue Manager - * Entry - */ -#define IX_ETHNPE_QM_Q_TXENETDONE_ADDR_MASK \ - MASK (IX_ETHNPE_QM_Q_FIELD_ADDR_L, \ - IX_ETHNPE_QM_Q_FIELD_ADDR_R) - -/*-------------------------------------------------------------------------- - * Queue Manager Queue entry bit field value extraction macros - *------------------------------------------------------------------------*/ - -/** - * @def IX_ETHNPE_QM_Q_FREEENET_ADDR_VAL(x) - * - * @brief Extraction macro for Address field of FreeNet Queue Manager Entry - * - * Pointer to an mbuf buffer descriptor - */ -#define IX_ETHNPE_QM_Q_FREEENET_ADDR_VAL(x) \ - ((x) & IX_ETHNPE_QM_Q_FREEENET_ADDR_MASK) - -/** - * @def IX_ETHNPE_QM_Q_RXENET_NPEID_VAL(x) - * - * @brief Extraction macro for NPE ID field of RxEnet Queue Manager Entry - * - * Set to 0 for entries originating from the Eth0 NPE; - * Set to 1 for entries originating from the Eth1 NPE. - */ -#define IX_ETHNPE_QM_Q_RXENET_NPEID_VAL(x) \ - BITS (x, IX_ETHNPE_QM_Q_FIELD_NPEID_L, \ - IX_ETHNPE_QM_Q_FIELD_NPEID_R) - -/** - * @def IX_ETHNPE_QM_Q_RXENET_PORTID_VAL(x) - * - * @brief Extraction macro for Port ID field of RxEnet Queue Manager Entry - * - * 0-5: Assignable (by the XScale client) to any of the physical ports. - * 6: It is reserved - * 7: Indication that the NPE did not find the associated frame's destination MAC address within - * its internal filtering database. - */ -#define IX_ETHNPE_QM_Q_RXENET_PORTID_VAL(x) \ - BITS (x, IX_ETHNPE_QM_Q_FIELD_PORTID_L, \ - IX_ETHNPE_QM_Q_Field_PortID_R) - -/** - * @def IX_ETHNPE_QM_Q_RXENET_ADDR_VAL(x) - * - * @brief Extraction macro for Address field of RxEnet Queue Manager Entry - * - * Pointer to an mbuf buffer descriptor - */ -#define IX_ETHNPE_QM_Q_RXENET_ADDR_VAL(x) \ - ((x) & IX_ETHNPE_QM_Q_RXENET_ADDR_MASK) - -/** - * @def IX_ETHNPE_QM_Q_TXENET_PRIOR_VAL(x) - * - * @brief Extraction macro for Priority field of TxEnet Queue Manager Entry - * - * Priority of the packet (as described in IEEE 802.1D). This field is - * cleared upon return from the Ethernet NPE to the TxEnetDone queue. - */ -#define IX_ETHNPE_QM_Q_TXENET_PRIOR_VAL(x) \ - BITS (x, IX_ETHNPE_QM_Q_FIELD_PRIOR_L, \ - IX_ETHNPE_QM_Q_FIELD_PRIOR_R) - -/** - * @def IX_ETHNPE_QM_Q_TXENET_ADDR_VAL(x) - * - * @brief Extraction macro for Address field of Queue Manager TxEnet Queue - * Manager Entry - * - * Pointer to an mbuf buffer descriptor - */ -#define IX_ETHNPE_QM_Q_TXENET_ADDR_VAL(x) \ - ((x) & IX_ETHNPE_QM_Q_TXENET_ADDR_MASK) - -/** - * @def IX_ETHNPE_QM_Q_TXENETDONE_NPEID_VAL(x) - * - * @brief Extraction macro for NPE ID field of TxEnetDone Queue Manager Entry - * - * Set to 0 for entries originating from the Eth0 NPE; set to 1 for en-tries - * originating from the Eth1 NPE. - */ -#define IX_ETHNPE_QM_Q_TXENETDONE_NPEID_VAL(x) \ - BITS (x, IX_ETHNPE_QM_Q_FIELD_NPEID_L, \ - IX_ETHNPE_QM_Q_FIELD_NPEID_R) - -/** - * @def IX_ETHNPE_QM_Q_TXENETDONE_ADDR_VAL(x) - * - * @brief Extraction macro for Address field of TxEnetDone Queue Manager Entry - * - * Pointer to an mbuf buffer descriptor - */ -#define IX_ETHNPE_QM_Q_TXENETDONE_ADDR_VAL(x) \ - ((x) & IX_ETHNPE_QM_Q_TXENETDONE_ADDR_MASK) - - -/*-------------------------------------------------------------------------- - * NPE limits - *------------------------------------------------------------------------*/ - -/** - * @def IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN - * - * @brief Macro to check the minimum length of a rx free buffer - */ -#define IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN (64) - -/** - * @def IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MASK - * - * @brief Mask to apply to the mbuf length before submitting it to the NPE - * (the NPE handles only rx free mbufs which are multiple of 64) - * - * @sa IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MASK - */ -#define IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MASK (~63) - -/** - * @def IX_ETHNPE_ACC_RXFREE_BUFFER_ROUND_UP(size) - * - * @brief Round up to get the size necessary to receive without chaining - * the frames which are (size) bytes (the NPE operates by multiple of 64) - * e.g. To receive 1514 bytes frames, the size of the buffers in replenish - * has to be at least (1514+63)&(~63) = 1536 bytes. - * - */ -#define IX_ETHNPE_ACC_RXFREE_BUFFER_ROUND_UP(size) (((size) + 63) & ~63) - -/** - * @def IX_ETHNPE_ACC_RXFREE_BUFFER_ROUND_DOWN(size) - * - * @brief Round down to apply to the mbuf length before submitting - * it to the NPE. (the NPE operates by multiple of 64) - * - */ -#define IX_ETHNPE_ACC_RXFREE_BUFFER_ROUND_DOWN(size) ((size) & ~63) - -/** - * @def IX_ETHNPE_ACC_FRAME_LENGTH_MAX - * - * @brief maximum mbuf length supported by the NPE - * - * @sa IX_ETHNPE_ACC_FRAME_LENGTH_MAX - */ -#define IX_ETHNPE_ACC_FRAME_LENGTH_MAX (16320) - -/** - * @def IX_ETHNPE_ACC_FRAME_LENGTH_DEFAULT - * - * @brief default mbuf length supported by the NPE - * - * @sa IX_ETHNPE_ACC_FRAME_LENGTH_DEFAULT - */ -#define IX_ETHNPE_ACC_FRAME_LENGTH_DEFAULT (1522) - -/** - * @def IX_ETHNPE_ACC_LENGTH_OFFSET - * - * @brief Offset of the cluster length field in the word shared with the NPEs - */ -#define IX_ETHNPE_ACC_LENGTH_OFFSET 16 - -/** - * @def IX_ETHNPE_ACC_PKTLENGTH_MASK - * - * @brief Mask of the cluster length field in the word shared with the NPEs - */ -#define IX_ETHNPE_ACC_PKTLENGTH_MASK 0x3fff - - -/** - *@} - */ - -#endif /* __doxygen_HIDE */ diff --git a/drivers/net/npe/include/IxFeatureCtrl.h b/drivers/net/npe/include/IxFeatureCtrl.h deleted file mode 100644 index 987b00b562..0000000000 --- a/drivers/net/npe/include/IxFeatureCtrl.h +++ /dev/null @@ -1,718 +0,0 @@ -/** - * @file IxFeatureCtrl.h - * - * @date 30-Jan-2003 - - * @brief This file contains the public API of the IXP400 Feature Control - * component. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ -/* ------------------------------------------------------ - Doxygen group definitions - ------------------------------------------------------ */ -/** - * @defgroup IxFeatureCtrlAPI IXP400 Feature Control (IxFeatureCtrl) API - * - * @brief The Public API for the IXP400 Feature Control. - * - * @{ - */ - -#ifndef IXFEATURECTRL_H -#define IXFEATURECTRL_H - -/* - * User defined include files - */ -#include "IxOsal.h" - -/* - * #defines and macros - */ - -/************************************************************* - * The following are IxFeatureCtrlComponentCheck return values. - ************************************************************/ - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_COMPONENT_DISABLED - * - * @brief Hardware Component is disabled/unavailable. - * Return status by ixFeatureCtrlComponentCheck() - */ -#define IX_FEATURE_CTRL_COMPONENT_DISABLED 0 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_COMPONENT_ENABLED - * - * @brief Hardware Component is available. - * Return status by ixFeatureCtrlComponentCheck() - */ -#define IX_FEATURE_CTRL_COMPONENT_ENABLED 1 - -/*********************************************************************************** - * Product ID in XScale CP15 - Register 0 - * - It contains information on the maximum XScale Core Frequency and - * Silicon Stepping. - * - XScale Core Frequency Id indicates only the maximum XScale frequency - * achievable and not the running XScale frequency (maybe stepped down). - * - The register is read by using ixFeatureCtrlProductIdRead. - * - Usage example: - * productId = ixFeatureCtrlProductIdRead(); - * if( (productId & IX_FEATURE_CTRL_SILICON_STEPPING_MASK) == - * IX_FEATURE_CTRL_SILICON_TYPE_A0 ) - * if( (productId & IX_FEATURE_CTRL_XSCALE_FREQ_MASK) == - * IX_FEATURE_CTRL_XSCALE_FREQ_533 ) - * - * 31 28 27 24 23 20 19 16 15 12 11 9 8 4 3 0 - * -------------------------------------------------------------------------------- - * | 0x6 | 0x9 | 0x0 | 0x5 | 0x4 | Device ID | XScale Core Freq Id | Si Stepping Id | - * -------------------------------------------------------------------------------- - * - * Maximum Achievable XScale Core Frequency Id : 533MHz - 0x1C - * 400MHz - 0x1D - * 266MHz - 0x1F - * - * THE CORE FREQUENCY ID IS NOT APPLICABLE TO IXP46X <\b> - * - * The above is applicable to IXP42X only. CP15 in IXP46X does not contain any - * Frequency ID. - * - * Si Stepping Id : A - 0x0 - * B - 0x1 - * - * XScale Core freq Id - Device ID [11:9] : IXP42X - 0x0 - * IXP46X - 0x1 - *************************************************************************************/ - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_SILICON_TYPE_A0 - * - * @brief This is the value of A0 Silicon in product ID. - */ -#define IX_FEATURE_CTRL_SILICON_TYPE_A0 0 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_SILICON_TYPE_B0 - * - * @brief This is the value of B0 Silicon in product ID. - */ -#define IX_FEATURE_CTRL_SILICON_TYPE_B0 1 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_SILICON_STEPPING_MASK - * - * @brief This is the mask of silicon stepping in product ID. - */ -#define IX_FEATURE_CTRL_SILICON_STEPPING_MASK 0xF - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_DEVICE_TYPE_MASK - * - * @brief This is the mask of silicon stepping in product ID. - */ -#define IX_FEATURE_CTRL_DEVICE_TYPE_MASK (0x7) - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET - * - * @brief This is the mask of silicon stepping in product ID. - */ -#define IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET 9 - - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_XSCALE_FREQ_533 - * - * @brief This is the value of 533MHz XScale Core in product ID. - */ -#define IX_FEATURE_CTRL_XSCALE_FREQ_533 ((0x1C)<<4) - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_XSCALE_FREQ_400 - * - * @brief This is the value of 400MHz XScale Core in product ID. - */ -#define IX_FEATURE_CTRL_XSCALE_FREQ_400 ((0x1D)<<4) - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_XSCALE_FREQ_266 - * - * @brief This is the value of 266MHz XScale Core in product ID. - */ -#define IX_FEATURE_CTRL_XSCALE_FREQ_266 ((0x1F)<<4) - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURE_CTRL_XSCALE_FREQ_MASK - * - * @brief This is the mask of XScale Core in product ID. - */ -#define IX_FEATURE_CTRL_XSCALE_FREQ_MASK ((0xFF)<<4) - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_UTOPIA_32PHY - * - * @brief Maximum UTOPIA PHY available is 32. - * - */ -#define IX_FEATURECTRL_REG_UTOPIA_32PHY 0x0 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_UTOPIA_16PHY - * - * @brief Maximum UTOPIA PHY available is 16. - * - */ -#define IX_FEATURECTRL_REG_UTOPIA_16PHY 0x1 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_UTOPIA_8PHY - * - * @brief Maximum UTOPIA PHY available to is 8. - * - */ -#define IX_FEATURECTRL_REG_UTOPIA_8PHY 0x2 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_UTOPIA_4PHY - * - * @brief Maximum UTOPIA PHY available to is 4. - * - */ -#define IX_FEATURECTRL_REG_UTOPIA_4PHY 0x3 - -#ifdef __ixp46X - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_XSCALE_533FREQ - * - * @brief Maximum frequency available to IXP46x is 533 MHz. - * - */ -#define IX_FEATURECTRL_REG_XSCALE_533FREQ 0x0 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_XSCALE_667FREQ - * - * @brief Maximum frequency available to IXP46x is 667 MHz. - * - */ -#define IX_FEATURECTRL_REG_XSCALE_667FREQ 0x1 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_XSCALE_400FREQ - * - * @brief Maximum frequency available to IXP46x is 400 MHz. - * - */ -#define IX_FEATURECTRL_REG_XSCALE_400FREQ 0x2 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_REG_XSCALE_266FREQ - * - * @brief Maximum frequency available to IXP46x is 266 MHz. - * - */ -#define IX_FEATURECTRL_REG_XSCALE_266FREQ 0x3 - -#endif /* __ixp46X */ - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE - * - * @brief Component selected is not available for device - * - */ -#define IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE 0x0000 - -/** - * @ingroup IxFeatureCtrlAPI - * - * @def IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE - * - * @brief Component selected is not available for device - * - */ -#define IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE 0xffff - -/** - * @defgroup IxFeatureCtrlSwConfig Software Configuration for Access Component - * - * @ingroup IxFeatureCtrlAPI - * - * @brief This section describes software configuration in access component. The - * configuration can be changed at run-time. ixFeatureCtrlSwConfigurationCheck( ) - * will be used across applicable access component to check the configuration. - * ixFeatureCtrlSwConfigurationWrite( ) is used to write the software configuration. - * - * @note All software configurations are default to be enabled. - * - * @{ - */ -/** - * @ingroup IxFeatureCtrlSwConfig - * - * @def IX_FEATURE_CTRL_SWCONFIG_DISABLED - * - * @brief Software configuration is disabled. - * - */ -#define IX_FEATURE_CTRL_SWCONFIG_DISABLED 0 - -/** - * @ingroup IxFeatureCtrlSwConfig - * - * @def IX_FEATURE_CTRL_SWCONFIG_ENABLED - * - * @brief Software configuration is enabled. - * - */ -#define IX_FEATURE_CTRL_SWCONFIG_ENABLED 1 - -/** - * Section for enums - **/ - -/** - * @ingroup IxFeatureCtrlBuildDevice - * - * @enum IxFeatureCtrlBuildDevice - * - * @brief Indicates software build type. - * - * Default build type is IXP42X - * - */ -typedef enum -{ - IX_FEATURE_CTRL_SW_BUILD_IXP42X = 0, /** - * - if(IX_FEATURE_CTRL_COMPONENT_DISABLED != - * ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0))
- * - if(IX_FEATURE_CTRL_COMPONENT_ENABLED == - * ixFeatureCtrlComponentCheck(IX_FEATURECTRL_PCI))
- * - * This function is typically called during component initialization time. - * - * @param componentType @ref IxFeatureCtrlComponentType [in] - the type of a component as - * defined above as IX_FEATURECTRL_XXX (Exp: IX_FEATURECTRL_PCI, IX_FEATURECTRL_ETH0) - - * - * @return - * - IX_FEATURE_CTRL_COMPONENT_ENABLED if component is available - * - IX_FEATURE_CTRL_COMPONENT_DISABLED if component is unavailable - */ -PUBLIC IX_STATUS -ixFeatureCtrlComponentCheck (IxFeatureCtrlComponentType componentType); - -/** - * @ingroup IxFeatureCtrlAPI - * - * @fn IxFeatureCtrlProductId ixFeatureCtrlProductIdRead (void) - * - * @brief This function will return IXP400 product ID i.e. CP15, - * Register 0. - * - * @return - * - IxFeatureCtrlProductId - the value of product ID. - * - */ -PUBLIC IxFeatureCtrlProductId -ixFeatureCtrlProductIdRead (void) ; - -/** - * @ingroup IxFeatureCtrlAPI - * - * @fn IX_STATUS ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType) - * - * @brief This function checks whether the specified software configuration is - * enabled or disabled. - * - * Usage Example:
- * - if(IX_FEATURE_CTRL_SWCONFIG_DISABLED != - * ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING))
- * - if(IX_FEATURE_CTRL_SWCONFIG_ENABLED == - * ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING))
- * - * This function is typically called during access component initialization time. - * - * @param swConfigType @ref IxFeatureCtrlSwConfig [in] - the type of a software configuration - * defined in IxFeatureCtrlSwConfig enumeration. - * - * @return - * - IX_FEATURE_CTRL_SWCONFIG_ENABLED if software configuration is enabled. - * - IX_FEATURE_CTRL_SWCONFIG_DISABLED if software configuration is disabled. - */ -PUBLIC IX_STATUS -ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType); - -/** - * @ingroup IxFeatureCtrlAPI - * - * @fn void ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled) - * - * @brief This function enable/disable the specified software configuration. - * - * Usage Example:
- * - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, true) is used - * to enable Ethernet Learning Feature
- * - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, false) is used - * to disable Ethernet Learning Feature
- * - * @param swConfigType IxFeatureCtrlSwConfig [in] - the type of a software configuration - * defined in IxFeatureCtrlSwConfig enumeration. - * @param enabled BOOL [in] - To enable(true) / disable (false) the specified software - * configuration. - * - * @return none - * - */ -PUBLIC void -ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled); - -/** - * @ingroup IxFeatureCtrlAPI - * - * @fn void ixFeatureCtrlIxp400SwVersionShow (void) - * - * @brief This function shows the current software release information for IXP400 - * - * @return none - * - */ -PUBLIC void -ixFeatureCtrlIxp400SwVersionShow (void); - -#endif /* IXFEATURECTRL_H */ - -/** - * @} defgroup IxFeatureCtrlAPI - */ diff --git a/drivers/net/npe/include/IxHssAcc.h b/drivers/net/npe/include/IxHssAcc.h deleted file mode 100644 index da71c42023..0000000000 --- a/drivers/net/npe/include/IxHssAcc.h +++ /dev/null @@ -1,1292 +0,0 @@ -/** - * @file IxHssAcc.h - * - * @date 07-DEC-2001 - * - * @brief This file contains the public API of the IXP400 HSS Access - * component - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/* ------------------------------------------------------ - Doxygen group definitions - ------------------------------------------------------ */ -/** - * @defgroup IxHssAccAPI IXP400 HSS Access (IxHssAcc) API - * - * @brief The public API for the IXP400 HssAccess component - * - * IxHssAcc is the access layer to the HSS packetised and channelised - * services - * - * Design Notes
- *
    - *
  • When a packet-pipe is configured for 56Kbps RAW mode, byte alignment of - * the transmitted data is not preserved. All raw data that is transmitted - * will be received in proper order by the receiver, but the first bit of - * the packet may be seen at any offset within a byte; all subsequent bytes - * will have the same offset for the duration of the packet. The same offset - * also applies to all subsequent packets received on the packet-pipe too. - * (Similar results will occur for data received from remote end.) While - * this behavior will also occur for 56Kbps HDLC mode, the HDLC - * encoding/decoding will preserve the original byte alignment at the - * receiver end. - *
- * - * 56Kbps Packetised Service Bandwidth Limitation
- *
    - *
  • IxHssAcc supports 56Kbps packetised service at a maximum aggregate rate - * for all HSS ports/HDLC channels of 12.288Mbps[1] in each direction, i.e. - * it supports 56Kbps packetised service on up to 8 T1 trunks. It does - * not support 56Kbps packetised service on 8 E1 trunks (i.e. 4 trunks per - * HSS port) unless those trunks are running 'fractional E1' with maximum - * aggregate rate of 12.288 Mbps in each direction.
    - * [1] 12.288Mbps = 1.536Mbp * 8 T1 - *
- * @{ */ - -#ifndef IXHSSACC_H -#define IXHSSACC_H - -#include "IxOsal.h" - -/* - * #defines for function return types, etc. - */ - -/** - * @def IX_HSSACC_TSLOTS_PER_HSS_PORT - * - * @brief The max number of TDM timeslots supported per HSS port - 4E1's = - * 32x4 = 128 - */ -#define IX_HSSACC_TSLOTS_PER_HSS_PORT 128 - -/* ----------------------------------------------------------- - The following are HssAccess return values returned through - service interfaces. The globally defined IX_SUCCESS (0) and - IX_FAIL (1) in IxOsalTypes.h are also used. - ----------------------------------------------------------- */ -/** - * @def IX_HSSACC_PARAM_ERR - * - * @brief HssAccess function return value for a parameter error - */ -#define IX_HSSACC_PARAM_ERR 2 - -/** - * @def IX_HSSACC_RESOURCE_ERR - * - * @brief HssAccess function return value for a resource error - */ -#define IX_HSSACC_RESOURCE_ERR 3 - -/** - * @def IX_HSSACC_PKT_DISCONNECTING - * - * @brief Indicates that a disconnect call is progressing and will - * disconnect soon - */ -#define IX_HSSACC_PKT_DISCONNECTING 4 - -/** - * @def IX_HSSACC_Q_WRITE_OVERFLOW - * - * @brief Indicates that an attempt to Tx or to replenish an - * RxFree Q failed due to Q overflow. - */ -#define IX_HSSACC_Q_WRITE_OVERFLOW 5 - -/* ------------------------------------------------------------------- - The following errors are HSS/NPE errors returned on error retrieval - ------------------------------------------------------------------- */ -/** - * @def IX_HSSACC_NO_ERROR - * - * @brief HSS port no error present - */ -#define IX_HSSACC_NO_ERROR 0 - -/** - * @def IX_HSSACC_TX_FRM_SYNC_ERR - * - * @brief HSS port TX Frame Sync error - */ -#define IX_HSSACC_TX_FRM_SYNC_ERR 1 - -/** - * @def IX_HSSACC_TX_OVER_RUN_ERR - * - * @brief HSS port TX over-run error - */ -#define IX_HSSACC_TX_OVER_RUN_ERR 2 - -/** - * @def IX_HSSACC_CHANNELISED_SW_TX_ERR - * - * @brief NPE software error in channelised TX - */ -#define IX_HSSACC_CHANNELISED_SW_TX_ERR 3 - -/** - * @def IX_HSSACC_PACKETISED_SW_TX_ERR - * - * @brief NPE software error in packetised TX - */ -#define IX_HSSACC_PACKETISED_SW_TX_ERR 4 - -/** - * @def IX_HSSACC_RX_FRM_SYNC_ERR - * - * @brief HSS port RX Frame Sync error - */ -#define IX_HSSACC_RX_FRM_SYNC_ERR 5 - -/** - * @def IX_HSSACC_RX_OVER_RUN_ERR - * - * @brief HSS port RX over-run error - */ -#define IX_HSSACC_RX_OVER_RUN_ERR 6 - -/** - * @def IX_HSSACC_CHANNELISED_SW_RX_ERR - * - * @brief NPE software error in channelised RX - */ -#define IX_HSSACC_CHANNELISED_SW_RX_ERR 7 - -/** - * @def IX_HSSACC_PACKETISED_SW_RX_ERR - * - * @brief NPE software error in packetised TX - */ -#define IX_HSSACC_PACKETISED_SW_RX_ERR 8 - -/* ----------------------------------- - Packetised service specific defines - ----------------------------------- */ - -/** - * @def IX_HSSACC_PKT_MIN_RX_MBUF_SIZE - * - * @brief Minimum size of the Rx mbuf in bytes which the client must supply - * to the component. - */ -#define IX_HSSACC_PKT_MIN_RX_MBUF_SIZE 64 - -/* -------------------------------------------------------------------- - Enumerated Types - these enumerated values may be used in setting up - the contents of hardware registers - -------------------------------------------------------------------- */ -/** - * @enum IxHssAccHssPort - * @brief The HSS port ID - There are two identical ports (0-1). - * - */ -typedef enum -{ - IX_HSSACC_HSS_PORT_0, /**< HSS Port 0 */ - IX_HSSACC_HSS_PORT_1, /**< HSS Port 1 */ - IX_HSSACC_HSS_PORT_MAX /**< Delimiter for error checks */ -} IxHssAccHssPort; - -/** - * @enum IxHssAccHdlcPort - * @brief The HDLC port ID - There are four identical HDLC ports (0-3) per - * HSS port and they correspond to the 4 E1/T1 trunks. - * - */ -typedef enum -{ - IX_HSSACC_HDLC_PORT_0, /**< HDLC Port 0 */ - IX_HSSACC_HDLC_PORT_1, /**< HDLC Port 1 */ - IX_HSSACC_HDLC_PORT_2, /**< HDLC Port 2 */ - IX_HSSACC_HDLC_PORT_3, /**< HDLC Port 3 */ - IX_HSSACC_HDLC_PORT_MAX /**< Delimiter for error checks */ -} IxHssAccHdlcPort; - -/** - * @enum IxHssAccTdmSlotUsage - * @brief The HSS TDM stream timeslot assignment types - * - */ -typedef enum -{ - IX_HSSACC_TDMMAP_UNASSIGNED, /**< Unassigned */ - IX_HSSACC_TDMMAP_HDLC, /**< HDLC - packetised */ - IX_HSSACC_TDMMAP_VOICE56K, /**< Voice56K - channelised */ - IX_HSSACC_TDMMAP_VOICE64K, /**< Voice64K - channelised */ - IX_HSSACC_TDMMAP_MAX /**< Delimiter for error checks */ -} IxHssAccTdmSlotUsage; - -/** - * @enum IxHssAccFrmSyncType - * @brief The HSS frame sync pulse type - * - */ -typedef enum -{ - IX_HSSACC_FRM_SYNC_ACTIVE_LOW, /**< Frame sync is sampled low */ - IX_HSSACC_FRM_SYNC_ACTIVE_HIGH, /**< sampled high */ - IX_HSSACC_FRM_SYNC_FALLINGEDGE, /**< sampled on a falling edge */ - IX_HSSACC_FRM_SYNC_RISINGEDGE, /**< sampled on a rising edge */ - IX_HSSACC_FRM_SYNC_TYPE_MAX /**< Delimiter for error checks */ -} IxHssAccFrmSyncType; - -/** - * @enum IxHssAccFrmSyncEnable - * @brief The IxHssAccFrmSyncEnable determines how the frame sync pulse is - * used - * */ -typedef enum -{ - IX_HSSACC_FRM_SYNC_INPUT, /**< Frame sync is sampled as an input */ - IX_HSSACC_FRM_SYNC_INVALID_VALUE, /**< 1 is not used */ - IX_HSSACC_FRM_SYNC_OUTPUT_FALLING, /**< Frame sync is an output generated - off a falling clock edge */ - IX_HSSACC_FRM_SYNC_OUTPUT_RISING, /**< Frame sync is an output generated - off a rising clock edge */ - IX_HSSACC_FRM_SYNC_ENABLE_MAX /**< Delimiter for error checks */ -} IxHssAccFrmSyncEnable; - -/** - * @enum IxHssAccClkEdge - * @brief IxHssAccClkEdge is used to determine the clk edge to use for - * framing and data - * - */ -typedef enum -{ - IX_HSSACC_CLK_EDGE_FALLING, /**< Clock sampled off a falling edge */ - IX_HSSACC_CLK_EDGE_RISING, /**< Clock sampled off a rising edge */ - IX_HSSACC_CLK_EDGE_MAX /**< Delimiter for error checks */ -} IxHssAccClkEdge; - -/** - * @enum IxHssAccClkDir - * @brief The HSS clock direction - * - */ -typedef enum -{ - IX_HSSACC_SYNC_CLK_DIR_INPUT, /**< Clock is an input */ - IX_HSSACC_SYNC_CLK_DIR_OUTPUT, /**< Clock is an output */ - IX_HSSACC_SYNC_CLK_DIR_MAX /**< Delimiter for error checks */ -} IxHssAccClkDir; - -/** - * @enum IxHssAccFrmPulseUsage - * @brief The HSS frame pulse usage - * - */ -typedef enum -{ - IX_HSSACC_FRM_PULSE_ENABLED, /**< Generate/Receive frame pulses */ - IX_HSSACC_FRM_PULSE_DISABLED, /**< Disregard frame pulses */ - IX_HSSACC_FRM_PULSE_MAX /**< Delimiter for error checks */ -} IxHssAccFrmPulseUsage; - -/** - * @enum IxHssAccDataRate - * @brief The HSS Data rate in relation to the clock - * - */ -typedef enum -{ - IX_HSSACC_CLK_RATE, /**< Data rate is at the configured clk speed */ - IX_HSSACC_HALF_CLK_RATE, /**< Data rate is half the configured clk speed */ - IX_HSSACC_DATA_RATE_MAX /**< Delimiter for error checks */ -} IxHssAccDataRate; - -/** - * @enum IxHssAccDataPolarity - * @brief The HSS data polarity type - * - */ -typedef enum -{ - IX_HSSACC_DATA_POLARITY_SAME, /**< Don't invert data between NPE and - HSS FIFOs */ - IX_HSSACC_DATA_POLARITY_INVERT, /**< Invert data between NPE and HSS - FIFOs */ - IX_HSSACC_DATA_POLARITY_MAX /**< Delimiter for error checks */ -} IxHssAccDataPolarity; - -/** - * @enum IxHssAccBitEndian - * @brief HSS Data endianness - * - */ -typedef enum -{ - IX_HSSACC_LSB_ENDIAN, /**< TX/RX Least Significant Bit first */ - IX_HSSACC_MSB_ENDIAN, /**< TX/RX Most Significant Bit first */ - IX_HSSACC_ENDIAN_MAX /**< Delimiter for the purposes of error checks */ -} IxHssAccBitEndian; - - -/** - * @enum IxHssAccDrainMode - * @brief Tx pin open drain mode - * - */ -typedef enum -{ - IX_HSSACC_TX_PINS_NORMAL, /**< Normal mode */ - IX_HSSACC_TX_PINS_OPEN_DRAIN, /**< Open Drain mode */ - IX_HSSACC_TX_PINS_MAX /**< Delimiter for error checks */ -} IxHssAccDrainMode; - -/** - * @enum IxHssAccSOFType - * @brief HSS start of frame types - * - */ -typedef enum -{ - IX_HSSACC_SOF_FBIT, /**< Framing bit transmitted and expected on rx */ - IX_HSSACC_SOF_DATA, /**< Framing bit not transmitted nor expected on rx */ - IX_HSSACC_SOF_MAX /**< Delimiter for error checks */ -} IxHssAccSOFType; - -/** - * @enum IxHssAccDataEnable - * @brief IxHssAccDataEnable is used to determine whether or not to drive - * the data pins - * - */ -typedef enum -{ - IX_HSSACC_DE_TRI_STATE, /**< TRI-State the data pins */ - IX_HSSACC_DE_DATA, /**< Push data out the data pins */ - IX_HSSACC_DE_MAX /**< Delimiter for error checks */ -} IxHssAccDataEnable; - -/** - * @enum IxHssAccTxSigType - * @brief IxHssAccTxSigType is used to determine how to drive the data pins - * - */ -typedef enum -{ - IX_HSSACC_TXSIG_LOW, /**< Drive the data pins low */ - IX_HSSACC_TXSIG_HIGH, /**< Drive the data pins high */ - IX_HSSACC_TXSIG_HIGH_IMP, /**< Drive the data pins with high impedance */ - IX_HSSACC_TXSIG_MAX /**< Delimiter for error checks */ -} IxHssAccTxSigType; - -/** - * @enum IxHssAccFbType - * @brief IxHssAccFbType determines how to drive the Fbit - * - * @warning This will only be used for T1 @ 1.544MHz - * - */ -typedef enum -{ - IX_HSSACC_FB_FIFO, /**< Fbit is dictated in FIFO */ - IX_HSSACC_FB_HIGH_IMP, /**< Fbit is high impedance */ - IX_HSSACC_FB_MAX /**< Delimiter for error checks */ -} IxHssAccFbType; - -/** - * @enum IxHssAcc56kEndianness - * @brief 56k data endianness when using the 56k type - * - */ -typedef enum -{ - IX_HSSACC_56KE_BIT_7_UNUSED, /**< High bit is unused */ - IX_HSSACC_56KE_BIT_0_UNUSED, /**< Low bit is unused */ - IX_HSSACC_56KE_MAX /**< Delimiter for error checks */ -} IxHssAcc56kEndianness; - -/** - * @enum IxHssAcc56kSel - * @brief 56k data transmission type when using the 56k type - * - */ -typedef enum -{ - IX_HSSACC_56KS_32_8_DATA, /**< 32/8 bit data */ - IX_HSSACC_56KS_56K_DATA, /**< 56K data */ - IX_HSSACC_56KS_MAX /**< Delimiter for error checks */ -} IxHssAcc56kSel; - - -/** - * @enum IxHssAccClkSpeed - * @brief IxHssAccClkSpeed represents the HSS clock speeds available - * - */ -typedef enum -{ - IX_HSSACC_CLK_SPEED_512KHZ, /**< 512KHz */ - IX_HSSACC_CLK_SPEED_1536KHZ, /**< 1.536MHz */ - IX_HSSACC_CLK_SPEED_1544KHZ, /**< 1.544MHz */ - IX_HSSACC_CLK_SPEED_2048KHZ, /**< 2.048MHz */ - IX_HSSACC_CLK_SPEED_4096KHZ, /**< 4.096MHz */ - IX_HSSACC_CLK_SPEED_8192KHZ, /**< 8.192MHz */ - IX_HSSACC_CLK_SPEED_MAX /**< Delimiter for error checking */ -} IxHssAccClkSpeed; - -/** - * @enum IxHssAccPktStatus - * @brief Indicates the status of packets passed to the client - * - */ -typedef enum -{ - IX_HSSACC_PKT_OK, /**< Error free.*/ - IX_HSSACC_STOP_SHUTDOWN_ERROR, /**< Errored due to stop or shutdown - occurrance.*/ - IX_HSSACC_HDLC_ALN_ERROR, /**< HDLC alignment error */ - IX_HSSACC_HDLC_FCS_ERROR, /**< HDLC Frame Check Sum error.*/ - IX_HSSACC_RXFREE_Q_EMPTY_ERROR, /**< RxFree Q became empty - while receiving this packet.*/ - IX_HSSACC_HDLC_MAX_FRAME_SIZE_EXCEEDED, /**< HDLC frame size - received is greater than - max specified at connect.*/ - IX_HSSACC_HDLC_ABORT_ERROR, /**< HDLC frame received is invalid due to an - abort sequence received.*/ - IX_HSSACC_DISCONNECT_IN_PROGRESS /**< Packet returned - because a disconnect is in progress */ -} IxHssAccPktStatus; - - -/** - * @enum IxHssAccPktCrcType - * @brief HDLC CRC type - * - */ -typedef enum -{ - IX_HSSACC_PKT_16_BIT_CRC = 16, /**< 16 bit CRC is being used */ - IX_HSSACC_PKT_32_BIT_CRC = 32 /**< 32 bit CRC is being used */ -} IxHssAccPktCrcType; - -/** - * @enum IxHssAccPktHdlcIdleType - * @brief HDLC idle transmission type - * - */ -typedef enum -{ - IX_HSSACC_HDLC_IDLE_ONES, /**< idle tx/rx will be a succession of ones */ - IX_HSSACC_HDLC_IDLE_FLAGS /**< idle tx/rx will be repeated flags */ -} IxHssAccPktHdlcIdleType; - -/** - * @brief Structure containing HSS port configuration parameters - * - * Note: All of these are used for TX. Only some are specific to RX. - * - */ -typedef struct -{ - IxHssAccFrmSyncType frmSyncType; /**< frame sync pulse type (tx/rx) */ - IxHssAccFrmSyncEnable frmSyncIO; /**< how the frame sync pulse is - used (tx/rx) */ - IxHssAccClkEdge frmSyncClkEdge; /**< frame sync clock edge type - (tx/rx) */ - IxHssAccClkEdge dataClkEdge; /**< data clock edge type (tx/rx) */ - IxHssAccClkDir clkDirection; /**< clock direction (tx/rx) */ - IxHssAccFrmPulseUsage frmPulseUsage; /**< whether to use the frame sync - pulse or not (tx/rx) */ - IxHssAccDataRate dataRate; /**< data rate in relation to the - clock (tx/rx) */ - IxHssAccDataPolarity dataPolarity; /**< data polarity type (tx/rx) */ - IxHssAccBitEndian dataEndianness; /**< data endianness (tx/rx) */ - IxHssAccDrainMode drainMode; /**< tx pin open drain mode (tx) */ - IxHssAccSOFType fBitUsage; /**< start of frame types (tx/rx) */ - IxHssAccDataEnable dataEnable; /**< whether or not to drive the data - pins (tx) */ - IxHssAccTxSigType voice56kType; /**< how to drive the data pins for - voice56k type (tx) */ - IxHssAccTxSigType unassignedType; /**< how to drive the data pins for - unassigned type (tx) */ - IxHssAccFbType fBitType; /**< how to drive the Fbit (tx) */ - IxHssAcc56kEndianness voice56kEndian;/**< 56k data endianness when using - the 56k type (tx) */ - IxHssAcc56kSel voice56kSel; /**< 56k data transmission type when - using the 56k type (tx) */ - unsigned frmOffset; /**< frame pulse offset in bits wrt - the first timeslot (0-1023) (tx/rx) */ - unsigned maxFrmSize; /**< frame size in bits (1-1024) - (tx/rx) */ -} IxHssAccPortConfig; - -/** - * @brief Structure containing HSS configuration parameters - * - */ -typedef struct -{ - IxHssAccPortConfig txPortConfig; /**< HSS tx port configuration */ - IxHssAccPortConfig rxPortConfig; /**< HSS rx port configuration */ - unsigned numChannelised; /**< The number of channelised - timeslots (0-32) */ - unsigned hssPktChannelCount; /**< The number of packetised - clients (0 - 4) */ - UINT8 channelisedIdlePattern; /**< The byte to be transmitted on - channelised service when there - is no client data to tx */ - BOOL loopback; /**< The HSS loopback state */ - unsigned packetizedIdlePattern; /**< The data to be transmitted on - packetised service when there is - no client data to tx */ - IxHssAccClkSpeed clkSpeed; /**< The HSS clock speed */ -} IxHssAccConfigParams; - -/** - * @brief This structure contains 56Kbps, HDLC-mode configuration parameters - * - */ -typedef struct -{ - BOOL hdlc56kMode; /**< 56kbps(true)/64kbps(false) HDLC */ - IxHssAcc56kEndianness hdlc56kEndian; /**< 56kbps data endianness - - ignored if hdlc56kMode is false*/ - BOOL hdlc56kUnusedBitPolarity0; /**< The polarity '0'(true)/'1'(false) of the unused - bit while in 56kbps mode - - ignored if hdlc56kMode is false*/ -} IxHssAccHdlcMode; - -/** - * @brief This structure contains information required by the NPE to - * configure the HDLC co-processor - * - */ -typedef struct -{ - IxHssAccPktHdlcIdleType hdlcIdleType; /**< What to transmit when a HDLC port is idle */ - IxHssAccBitEndian dataEndian; /**< The HDLC data endianness */ - IxHssAccPktCrcType crcType; /**< The CRC type to be used for this HDLC port */ -} IxHssAccPktHdlcFraming; - -/** - * @typedef UINT32 IxHssAccPktUserId - * - * @brief The client supplied value which will be supplied as a parameter - * with a given callback. - * - * This value will be passed into the ixHssAccPktPortConnect function once each - * with given callbacks. This value will then be passed back to the client - * as one of the parameters to each of these callbacks, - * when these callbacks are called. - */ -typedef UINT32 IxHssAccPktUserId; - - -/** - * @typedef IxHssAccLastErrorCallback - * @brief Prototype of the clients function to accept notification of the - * last error - * - * This function is registered through the config. The client will initiate - * the last error retrieval. The HssAccess component will send a message to - * the NPE through the NPE Message Handler. When a response to the read is - * received, the NPE Message Handler will callback the HssAccess component - * which will execute this function in the same IxNpeMh context. The client - * will be passed the last error and the related service port (packetised - * 0-3, channelised 0) - * - * @param lastHssError unsigned [in] - The last Hss error registered that - * has been registered. - * @param servicePort unsigned [in] - This is the service port number. - * (packetised 0-3, channelised 0) - * - * @return void - */ -typedef void (*IxHssAccLastErrorCallback) (unsigned lastHssError, - unsigned servicePort); - -/** - * @typedef IxHssAccPktRxCallback - * @brief Prototype of the clients function to accept notification of - * packetised rx - * - * This function is registered through the ixHssAccPktPortConnect. hssPktAcc will pass - * received data in the form of mbufs to the client. The mbuf passed back - * to the client could contain a chain of buffers, depending on the packet - * size received. - * - * @param *buffer @ref IX_OSAL_MBUF [in] - This is the mbuf which contains the - * payload received. - * @param numHssErrs unsigned [in] - This is the number of hssErrors - * the Npe has received - * @param pktStatus @ref IxHssAccPktStatus [in] - This is the status of the - * mbuf that has been received. - * @param rxUserId @ref IxHssAccPktUserId [in] - This is the client supplied value - * passed in at ixHssAccPktPortConnect time which is now returned to the client. - * - * @return void - */ -typedef void (*IxHssAccPktRxCallback) (IX_OSAL_MBUF *buffer, - unsigned numHssErrs, - IxHssAccPktStatus pktStatus, - IxHssAccPktUserId rxUserId); - -/** - * @typedef IxHssAccPktRxFreeLowCallback - * @brief Prototype of the clients function to accept notification of - * requirement of more Rx Free buffers - * - * The client can choose to register a callback of this type when - * calling a connecting. This function is registered through the ixHssAccPktPortConnect. - * If defined, the access layer will provide the trigger for - * this callback. The callback will be responsible for supplying mbufs to - * the access layer for use on the receive path from the HSS using - * ixHssPktAccFreeBufReplenish. - * - * @return void - */ -typedef void (*IxHssAccPktRxFreeLowCallback) (IxHssAccPktUserId rxFreeLowUserId); - -/** - * @typedef IxHssAccPktTxDoneCallback - * @brief Prototype of the clients function to accept notification of - * completion with Tx buffers - * - * This function is registered through the ixHssAccPktPortConnect. It enables - * the hssPktAcc to pass buffers back to the client - * when transmission is complete. - * - * @param *buffer @ref IX_OSAL_MBUF [in] - This is the mbuf which contained - * the payload that was for Tx. - * @param numHssErrs unsigned [in] - This is the number of hssErrors - * the Npe has received - * @param pktStatus @ref IxHssAccPktStatus [in] - This is the status of the - * mbuf that has been transmitted. - * @param txDoneUserId @ref IxHssAccPktUserId [in] - This is the client supplied value - * passed in at ixHssAccPktPortConnect time which is now returned to the client. - * - * @return void - */ -typedef void (*IxHssAccPktTxDoneCallback) (IX_OSAL_MBUF *buffer, - unsigned numHssErrs, - IxHssAccPktStatus pktStatus, - IxHssAccPktUserId txDoneUserId); - -/** - * @typedef IxHssAccChanRxCallback - * @brief Prototype of the clients function to accept notification of - * channelised rx - * - * This callback, if defined by the client in the connect, will get called - * in the context of an IRQ. The IRQ will be triggered when the hssSyncQMQ - * is not empty. The queued entry will be dequeued and this function will - * be executed. - * - * @param hssPortId @ref IxHssAccHssPort - The HSS port Id. There are two - * identical ports (0-1). - * @param txOffset unsigned [in] - an offset indicating from where within - * the txPtrList the NPE is currently transmitting from. - * @param rxOffset unsigned [in] - an offset indicating where within the - * receive buffers the NPE has just written the received data to. - * @param numHssErrs unsigned [in] - This is the number of hssErrors - * the Npe has received - * - * @return void - */ -typedef void (*IxHssAccChanRxCallback) (IxHssAccHssPort hssPortId, - unsigned rxOffset, - unsigned txOffset, - unsigned numHssErrs); - -/* - * Prototypes for interface functions. - */ - -/** - * - * @ingroup IxHssAccAPI - * - * @fn IX_STATUS ixHssAccPortInit (IxHssAccHssPort hssPortId, - IxHssAccConfigParams *configParams, - IxHssAccTdmSlotUsage *tdmMap, - IxHssAccLastErrorCallback lastHssErrorCallback) - * - * @brief Initialise a HSS port. No channelised or packetised connections - * should exist in the HssAccess layer while this interface is being called. - * - * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two - * identical ports (0-1). - * @param *configParams @ref IxHssAccConfigParams [in] - A pointer to the HSS - * configuration structure - * @param *tdmMap @ref IxHssAccTdmSlotUsage [in] - A pointer to an array of size - * IX_HSSACC_TSLOTS_PER_HSS_PORT, defining the slot usage over the HSS port - * @param lastHssErrorCallback @ref IxHssAccLastErrorCallback [in] - Client - * callback to report last error - * - * @return - * - IX_SUCCESS The function executed successfully - * - IX_FAIL The function did not execute successfully - * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a - * parameter error - */ -PUBLIC IX_STATUS -ixHssAccPortInit (IxHssAccHssPort hssPortId, - IxHssAccConfigParams *configParams, - IxHssAccTdmSlotUsage *tdmMap, - IxHssAccLastErrorCallback lastHssErrorCallback); - -/** - * - * @ingroup IxHssAccAPI - * - * @fn IX_STATUS ixHssAccLastErrorRetrievalInitiate ( - IxHssAccHssPort hssPortId) - * - * @brief Initiate the retrieval of the last HSS error. The HSS port - * should be configured before attempting to call this interface. - * - * @param hssPortId @ref IxHssAccHssPort [in] - the HSS port ID - * - * @return - * - IX_SUCCESS The function executed successfully - * - IX_FAIL The function did not execute successfully - * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a - * parameter error - */ -PUBLIC IX_STATUS -ixHssAccLastErrorRetrievalInitiate (IxHssAccHssPort hssPortId); - - -/** - * - * @ingroup IxHssAccAPI - * - * @fn IX_STATUS ixHssAccInit () - * - * @brief This function is responsible for initialising resources for use - * by the packetised and channelised clients. It should be called after - * HSS NPE image has been downloaded into NPE-A and before any other - * HssAccess interface is called. - * No other HssAccPacketised interface should be called while this interface - * is being processed. - * - * @return - * - IX_SUCCESS The function executed successfully - * - IX_FAIL The function did not execute successfully - * - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due - * to a resource error - */ -PUBLIC IX_STATUS -ixHssAccInit (void); - - -/** - * - * @ingroup IxHssAccAPI - * - * @fn ixHssAccPktPortConnect (IxHssAccHssPort hssPortId, - IxHssAccHdlcPort hdlcPortId, - BOOL hdlcFraming, - IxHssAccHdlcMode hdlcMode, - BOOL hdlcBitInvert, - unsigned blockSizeInWords, - UINT32 rawIdleBlockPattern, - IxHssAccPktHdlcFraming hdlcTxFraming, - IxHssAccPktHdlcFraming hdlcRxFraming, - unsigned frmFlagStart, - IxHssAccPktRxCallback rxCallback, - IxHssAccPktUserId rxUserId, - IxHssAccPktRxFreeLowCallback rxFreeLowCallback, - IxHssAccPktUserId rxFreeLowUserId, - IxHssAccPktTxDoneCallback txDoneCallback, - IxHssAccPktUserId txDoneUserId) - * - * @brief This function is responsible for connecting a client to one of - * the 4 available HDLC ports. The HSS port should be configured before - * attempting a connect. No other HssAccPacketised interface should be - * called while this connect is being processed. - * - * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two - * identical ports (0-1). - * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port and - * it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 - * @param hdlcFraming BOOL [in] - This value determines whether the service - * will use HDLC data or the debug, raw data type i.e. no HDLC processing - * @param hdlcMode @ref IxHssAccHdlcMode [in] - This structure contains 56Kbps, HDLC-mode - * configuration parameters - * @param hdlcBitInvert BOOL [in] - This value determines whether bit inversion - * will occur between HDLC and HSS co-processors i.e. post-HDLC processing for - * transmit and pre-HDLC processing for receive, for the specified HDLC Termination - * Point - * @param blockSizeInWords unsigned [in] - The max tx/rx block size - * @param rawIdleBlockPattern UINT32 [in] - Tx idle pattern in raw mode - * @param hdlcTxFraming @ref IxHssAccPktHdlcFraming [in] - This structure contains - * the following information required by the NPE to configure the HDLC - * co-processor for TX - * @param hdlcRxFraming @ref IxHssAccPktHdlcFraming [in] - This structure contains - * the following information required by the NPE to configure the HDLC - * co-processor for RX - * @param frmFlagStart unsigned - Number of flags to precede to - * transmitted flags (0-2). - * @param rxCallback @ref IxHssAccPktRxCallback [in] - Pointer to - * the clients packet receive function. - * @param rxUserId @ref IxHssAccPktUserId [in] - The client supplied rx value - * to be passed back as an argument to the supplied rxCallback - * @param rxFreeLowCallback @ref IxHssAccPktRxFreeLowCallback [in] - Pointer to - * the clients Rx free buffer request function. If NULL, assume client will - * trigger independently. - * @param rxFreeLowUserId @ref IxHssAccPktUserId [in] - The client supplied RxFreeLow value - * to be passed back as an argument to the supplied rxFreeLowCallback - * @param txDoneCallback @ref IxHssAccPktTxDoneCallback [in] - Pointer to the - * clients Tx done callback function - * @param txDoneUserId @ref IxHssAccPktUserId [in] - The client supplied txDone value - * to be passed back as an argument to the supplied txDoneCallback - * - * @return - * - IX_SUCCESS The function executed successfully - * - IX_FAIL The function did not execute successfully - * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a - * parameter error - * - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due - * to a resource error - */ -PUBLIC IX_STATUS -ixHssAccPktPortConnect (IxHssAccHssPort hssPortId, - IxHssAccHdlcPort hdlcPortId, - BOOL hdlcFraming, - IxHssAccHdlcMode hdlcMode, - BOOL hdlcBitInvert, - unsigned blockSizeInWords, - UINT32 rawIdleBlockPattern, - IxHssAccPktHdlcFraming hdlcTxFraming, - IxHssAccPktHdlcFraming hdlcRxFraming, - unsigned frmFlagStart, - IxHssAccPktRxCallback rxCallback, - IxHssAccPktUserId rxUserId, - IxHssAccPktRxFreeLowCallback rxFreeLowCallback, - IxHssAccPktUserId rxFreeLowUserId, - IxHssAccPktTxDoneCallback txDoneCallback, - IxHssAccPktUserId txDoneUserId); - -/** - * - * @ingroup IxHssAccAPI - * - * @fn IX_STATUS ixHssAccPktPortEnable (IxHssAccHssPort hssPortId, - IxHssAccHdlcPort hdlcPortId) - * - * @brief This function is responsible for enabling a packetised service - * for the specified HSS/HDLC port combination. It enables the RX flow. The - * client must have already connected to a packetised service and is responsible - * for ensuring an adequate amount of RX mbufs have been supplied to the access - * component before enabling the packetised service. This function must be called - * on a given port before any call to ixHssAccPktPortTx on the same port. - * No other HssAccPacketised interface should be called while this interface is - * being processed. - * - * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two - * identical ports (0-1). - * @param hdlcPortId @ref IxHssAccHdlcPort [in] - The port id (0,1,2,3) to enable the service - * on. - * - * @return - * - IX_SUCCESS The function executed successfully - * - IX_FAIL The function did not execute successfully - * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a - * parameter error - */ -PUBLIC IX_STATUS -ixHssAccPktPortEnable (IxHssAccHssPort hssPortId, - IxHssAccHdlcPort hdlcPortId); - -/** - * @fn IX_STATUS ixHssAccPktPortDisable (IxHssAccHssPort hssPortId, - IxHssAccHdlcPort hdlcPortId) - * - * @brief This function is responsible for disabling a packetised service - * for the specified HSS/HDLC port combination. It disables the RX flow. - * The client must have already connected to and enabled a packetised service - * for the specified HDLC port. This disable interface can be called before a - * disconnect, but is not required to. - * - * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two - * identical ports (0-1). - * @param hdlcPortId @ref IxHssAccHdlcPort [in] - The port id (0,1,2,3) to disable - * the service on. - * - * @return - * - IX_SUCCESS The function executed successfully - * - IX_FAIL The function did not execute successfully - * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a - * parameter error - */ -PUBLIC IX_STATUS -ixHssAccPktPortDisable (IxHssAccHssPort hssPortId, - IxHssAccHdlcPort hdlcPortId); - -/** - * - * @ingroup IxHssAccAPI - * - * @fn IX_STATUS ixHssAccPktPortDisconnect (IxHssAccHssPort hssPortId, - IxHssAccHdlcPort hdlcPortId) - * - * @brief This function is responsible for disconnecting a client from one - * of the 4 available HDLC ports. It is not required that the Rx Flow - * has been disabled before calling this function. If the RX Flow has not been - * disabled, the disconnect will disable it before proceeding with the - * disconnect. No other HssAccPacketised - * interface should be called while this interface is being processed. - * - * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two - * identical ports (0-1). - * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port - * to disconnect and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 - * - * @return - * - IX_SUCCESS The function executed successfully - * - IX_FAIL The function did not execute successfully - * - IX_HSSACC_PKT_DISCONNECTING The function has initiated the disconnecting - * procedure but it has not completed yet. - */ -PUBLIC IX_STATUS -ixHssAccPktPortDisconnect (IxHssAccHssPort hssPortId, - IxHssAccHdlcPort hdlcPortId); - -/** - * - * @ingroup IxHssAccAPI - * - * @fn BOOL ixHssAccPktPortIsDisconnectComplete (IxHssAccHssPort hssPortId, - IxHssAccHdlcPort hdlcPortId) - * - * @brief This function is called to check if a given HSS/HDLC port - * combination is in a connected state or not. This function may be called - * at any time to determine a ports state. No other HssAccPacketised - * interface should be called while this interface is being processed. - * - * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two - * identical ports (0-1). - * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port - * to disconnect and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 - * - * @return - * - true The state of this HSS/HDLC port combination is disconnected, - * so if a disconnect was called, it is now completed. - * - false The state of this HSS/HDLC port combination is connected, - * so if a disconnect was called, it is not yet completed. - */ -PUBLIC BOOL -ixHssAccPktPortIsDisconnectComplete (IxHssAccHssPort hssPortId, - IxHssAccHdlcPort hdlcPortId); - - -/** - * - * @ingroup IxHssAccAPI - * - * @fn IX_STATUS ixHssAccPktPortRxFreeReplenish (IxHssAccHssPort hssPortId, - IxHssAccHdlcPort hdlcPortId, - IX_OSAL_MBUF *buffer) - * - * @brief Function which the client calls at regular intervals to provide - * mbufs to the access component for RX. A connection should exist for - * the specified hssPortId/hdlcPortId combination before attempting to call this - * interface. Also, the connection should not be in a disconnecting state. - * - * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two - * identical ports (0-1). - * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port - * and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 - * @param *buffer @ref IX_OSAL_MBUF [in] - A pointer to a free mbuf to filled with payload. - * - * @return - * - IX_SUCCESS The function executed successfully - * - IX_FAIL The function did not execute successfully - * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a - * parameter error - * - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due - * to a resource error - * - IX_HSSACC_Q_WRITE_OVERFLOW The function did not succeed due to a Q - * overflow - */ -PUBLIC IX_STATUS -ixHssAccPktPortRxFreeReplenish (IxHssAccHssPort hssPortId, - IxHssAccHdlcPort hdlcPortId, - IX_OSAL_MBUF *buffer); - -/** - * - * @ingroup IxHssAccAPI - * - * @fn IX_STATUS ixHssAccPktPortTx (IxHssAccHssPort hssPortId, - IxHssAccHdlcPort hdlcPortId, - IX_OSAL_MBUF *buffer) - * - * @brief Function which the client calls when it wants to transmit - * packetised data. An enabled connection should exist on the specified - * hssPortId/hdlcPortId combination before attempting to call this interface. - * No other HssAccPacketised - * interface should be called while this interface is being processed. - * - * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two - * identical ports (0-1). - * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port - * and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 - * @param *buffer @ref IX_OSAL_MBUF [in] - A pointer to a chain of mbufs which the - * client has filled with the payload - * - * @return - * - IX_SUCCESS The function executed successfully - * - IX_FAIL The function did not execute successfully - * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a - * parameter error - * - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due - * to a resource error. See note. - * - IX_HSSACC_Q_WRITE_OVERFLOW The function did not succeed due to a Q - * overflow - * - * @note IX_HSSACC_RESOURCE_ERR is returned when a free descriptor cannot be - * obtained to send the chain of mbufs to the NPE. This is a normal scenario. - * HssAcc has a pool of descriptors and this error means that they are currently - * all in use. - * The recommended approach to this is to retry until a descriptor becomes free - * and the packet is successfully transmitted. - * Alternatively, the user could wait until the next IxHssAccPktTxDoneCallback - * callback is triggered, and then retry, as it is this event that causes a - * transmit descriptor to be freed. - */ -PUBLIC IX_STATUS -ixHssAccPktPortTx (IxHssAccHssPort hssPortId, - IxHssAccHdlcPort hdlcPortId, - IX_OSAL_MBUF *buffer); - -/** - * - * @ingroup IxHssAccAPI - * - * @fn IX_STATUS ixHssAccChanConnect (IxHssAccHssPort hssPortId, - unsigned bytesPerTSTrigger, - UINT8 *rxCircular, - unsigned numRxBytesPerTS, - UINT32 *txPtrList, - unsigned numTxPtrLists, - unsigned numTxBytesPerBlk, - IxHssAccChanRxCallback rxCallback) - * - * @brief This function allows the client to connect to the Tx/Rx NPE - * Channelised Service. There can only be one client per HSS port. The - * client is responsible for ensuring that the HSS port is configured - * appropriately before its connect request. No other HssAccChannelised - * interface should be called while this interface is being processed. - * - * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two - * identical ports (0-1). - * @param bytesPerTSTrigger unsigned [in] - The NPE will trigger the access - * component after bytesPerTSTrigger have been received for all trunk - * timeslots. This figure is a multiple of 8 e.g. 8 for 1ms trigger, 16 for - * 2ms trigger. - * @param *rxCircular UINT8 [in] - A pointer to memory allocated by the - * client to be filled by data received. The buffer at this address is part - * of a pool of buffers to be accessed in a circular fashion. This address - * will be written to by the NPE. Therefore, it needs to be a physical address. - * @param numRxBytesPerTS unsigned [in] - The number of bytes allocated per - * timeslot within the receive memory. This figure will depend on the - * latency of the system. It needs to be deep enough for data to be read by - * the client before the NPE re-writes over that memory e.g. if the client - * samples at a rate of 40bytes per timeslot, numRxBytesPerTS may need to - * be 40bytes * 3. This would give the client 3 * 5ms of time before - * received data is over-written. - * @param *txPtrList UINT32 [in] - The address of an area of contiguous - * memory allocated by the client to be populated with pointers to data for - * transmission. Each pointer list contains a pointer per active channel. - * The txPtrs will point to data to be transmitted by the NPE. Therefore, - * they must point to physical addresses. - * @param numTxPtrLists unsigned [in] - The number of pointer lists in - * txPtrList. This figure is dependent on jitter. - * @param numTxBytesPerBlk unsigned [in] - The size of the Tx data, in - * bytes, that each pointer within the PtrList points to. - * @param rxCallback @ref IxHssAccChanRxCallback [in] - A client function - * pointer to be called back to handle the actual tx/rx of channelised - * data. If this is not NULL, an ISR will call this function. If this - * pointer is NULL, it implies that the client will use a polling mechanism - * to detect when the tx and rx of channelised data is to occur. The client - * will use hssChanAccStatus for this. - * - * @return - * - IX_SUCCESS The function executed successfully - * - IX_FAIL The function did not execute successfully - * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a - * parameter error - */ - -PUBLIC IX_STATUS -ixHssAccChanConnect (IxHssAccHssPort hssPortId, - unsigned bytesPerTSTrigger, - UINT8 *rxCircular, - unsigned numRxBytesPerTS, - UINT32 *txPtrList, - unsigned numTxPtrLists, - unsigned numTxBytesPerBlk, - IxHssAccChanRxCallback rxCallback); - -/** - * - * @ingroup IxHssAccAPI - * - * @fn IX_STATUS ixHssAccChanPortEnable (IxHssAccHssPort hssPortId) - * - * @brief This function is responsible for enabling a channelised service - * for the specified HSS port. It enables the NPE RX flow. The client must - * have already connected to a channelised service before enabling the - * channelised service. No other HssAccChannelised - * interface should be called while this interface is being processed. - * - * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two - * identical ports (0-1). - * - * @return - * - IX_SUCCESS The function executed successfully - * - IX_FAIL The function did not execute successfully - * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a - * parameter error - */ -PUBLIC IX_STATUS -ixHssAccChanPortEnable (IxHssAccHssPort hssPortId); - -/** - * - * @ingroup IxHssAccAPI - * - * @fn IX_STATUS ixHssAccChanPortDisable (IxHssAccHssPort hssPortId) - * - * @brief This function is responsible for disabling a channelised service - * for the specified HSS port. It disables the NPE RX flow. The client must - * have already connected to and enabled a channelised service for the - * specified HSS port. This disable interface can be called before a - * disconnect, but is not required to. No other HssAccChannelised - * interface should be called while this interface is being processed. - * - * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two - * identical ports (0-1). - * - * @return - * - IX_SUCCESS The function executed successfully - * - IX_FAIL The function did not execute successfully - * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a - * parameter error - */ -PUBLIC IX_STATUS -ixHssAccChanPortDisable (IxHssAccHssPort hssPortId); - -/** - * - * @ingroup IxHssAccAPI - * - * @fn IX_STATUS ixHssAccChanDisconnect (IxHssAccHssPort hssPortId) - * - * @brief This function allows the client to Disconnect from a channelised - * service. If the NPE RX Flow has not been disabled, the disconnect will - * disable it before proceeding with other disconnect functionality. - * No other HssAccChannelised interface should be called while this - * interface is being processed. - * - * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two - * identical ports (0-1). - * - * @return - * - IX_SUCCESS The function executed successfully - * - IX_FAIL The function did not execute successfully - * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a - * parameter error - */ -PUBLIC IX_STATUS -ixHssAccChanDisconnect (IxHssAccHssPort hssPortId); - -/** - * - * @ingroup IxHssAccAPI - * - * @fn IX_STATUS ixHssAccChanStatusQuery (IxHssAccHssPort hssPortId, - BOOL *dataRecvd, - unsigned *rxOffset, - unsigned *txOffset, - unsigned *numHssErrs) - * - * @brief This function is called by the client to query whether or not - * channelised data has been received. If there is, hssChanAcc will return - * the details in the output parameters. An enabled connection should - * exist on the specified hssPortId before attempting to call this interface. - * No other HssAccChannelised interface should be called while this - * interface is being processed. - * - * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two - * identical ports (0-1). - * @param *dataRecvd BOOL [out] - This BOOL indicates to the client whether - * or not the access component has read any data for the client. If - * false, the other output parameters will not have been written to. - * @param *rxOffset unsigned [out] - An offset to indicate to the client - * where within the receive buffers the NPE has just written the received - * data to. - * @param *txOffset unsigned [out] - An offset to indicate to the client - * from where within the txPtrList the NPE is currently transmitting from - * @param *numHssErrs unsigned [out] - The total number of HSS port errors - * since initial port configuration - * - * - * @return - * - IX_SUCCESS The function executed successfully - * - IX_FAIL The function did not execute successfully - * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a - * parameter error - */ -PUBLIC IX_STATUS -ixHssAccChanStatusQuery (IxHssAccHssPort hssPortId, - BOOL *dataRecvd, - unsigned *rxOffset, - unsigned *txOffset, - unsigned *numHssErrs); - -/** - * - * @ingroup IxHssAccAPI - * - * @fn void ixHssAccShow (void) - * - * @brief This function will display the current state of the IxHssAcc - * component. The output is sent to stdout. - * - * @return void - */ -PUBLIC void -ixHssAccShow (void); - -/** - * - * @ingroup IxHssAccAPI - * - * @fn void ixHssAccStatsInit (void) - * - * @brief This function will reset the IxHssAcc statistics. - * - * @return void - */ -PUBLIC void -ixHssAccStatsInit (void); - -#endif /* IXHSSACC_H */ - -/** - * @} defgroup IxHssAcc - */ diff --git a/drivers/net/npe/include/IxI2cDrv.h b/drivers/net/npe/include/IxI2cDrv.h deleted file mode 100644 index 033154046f..0000000000 --- a/drivers/net/npe/include/IxI2cDrv.h +++ /dev/null @@ -1,843 +0,0 @@ -/** - * @file IxI2cDrv.h - * - * @brief Header file for the IXP400 I2C Driver (IxI2cDrv) - * - * @version $Revision: 0.1 $ - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/** - * @defgroup IxI2cDrv IXP400 I2C Driver(IxI2cDrv) API - * - * @brief IXP400 I2C Driver Public API - * - * @{ - */ -#ifndef IXI2CDRV_H -#define IXI2CDRV_H - -#ifdef __ixp46X -#include "IxOsal.h" - -/* - * Section for #define - */ - -/** - * @ingroup IxI2cDrv - * @brief The interval of micro/mili seconds the IXP will wait before it polls for - * status from the ixI2cIntrXferStatus; Every 20us is 1 byte @ - * 400Kbps and 4 bytes @ 100Kbps. This is dependent on delay type selected - * through the API ixI2cDrvDelayTypeSelect. - */ -#define IX_I2C_US_POLL_FOR_XFER_STATUS 20 - -/** - * @ingroup IxI2cDrv - * @brief The number of tries that will be attempted to call a callback - * function if the callback does not or is unable to resolve the - * issue it is called to resolve - */ -#define IX_I2C_NUM_OF_TRIES_TO_CALL_CALLBACK_FUNC 10 - - -/** - * @ingroup IxI2cDrv - * @brief Number of tries slave will poll the IDBR Rx full bit before it - * gives up - */ -#define IX_I2C_NUM_TO_POLL_IDBR_RX_FULL 0x100 - -/** - * @ingroup IxI2cDrv - * @brief Number of tries slave will poll the IDBR Tx empty bit before it - * gives up - */ -#define IX_I2C_NUM_TO_POLL_IDBR_TX_EMPTY 0x100 - -/* - * Section for enum - */ - -/** - * @ingroup IxI2cDrv - * - * @enum IxI2cMasterStatus - * - * @brief The master status - transfer complete, bus error or arbitration loss - */ -typedef enum -{ - IX_I2C_MASTER_XFER_COMPLETE = IX_SUCCESS, - IX_I2C_MASTER_XFER_BUS_ERROR, - IX_I2C_MASTER_XFER_ARB_LOSS -} IxI2cMasterStatus; - - -/** - * @ingroup IxI2cDrv - * - * @enum IX_I2C_STATUS - * - * @brief The status that can be returned in a I2C driver initialization - */ -typedef enum -{ - IX_I2C_SUCCESS = IX_SUCCESS, /**< Success status */ - IX_I2C_FAIL, /**< Fail status */ - IX_I2C_NOT_SUPPORTED, /**< hardware does not have dedicated I2C hardware */ - IX_I2C_NULL_POINTER, /**< parameter passed in is NULL */ - IX_I2C_INVALID_SPEED_MODE_ENUM_VALUE, /**< speed mode selected is invalid */ - IX_I2C_INVALID_FLOW_MODE_ENUM_VALUE, /**< flow mode selected is invalid */ - IX_I2C_SLAVE_ADDR_CB_MISSING, /**< slave callback is NULL */ - IX_I2C_GEN_CALL_CB_MISSING, /**< general callback is NULL */ - IX_I2C_INVALID_SLAVE_ADDR, /**< invalid slave address specified */ - IX_I2C_INT_BIND_FAIL, /**< interrupt bind fail */ - IX_I2C_INT_UNBIND_FAIL, /**< interrupt unbind fail */ - IX_I2C_NOT_INIT, /**< I2C is not initialized yet */ - IX_I2C_MASTER_BUS_BUSY, /**< master detected a I2C bus busy */ - IX_I2C_MASTER_ARB_LOSS, /**< master experienced arbitration loss */ - IX_I2C_MASTER_XFER_ERROR, /**< master experienced a transfer error */ - IX_I2C_MASTER_BUS_ERROR, /**< master detected a I2C bus error */ - IX_I2C_MASTER_NO_BUFFER, /**< no buffer provided for master transfer */ - IX_I2C_MASTER_INVALID_XFER_MODE, /**< xfer mode selected is invalid */ - IX_I2C_SLAVE_ADDR_NOT_DETECTED, /**< polled slave addr not detected */ - IX_I2C_GEN_CALL_ADDR_DETECTED, /**< polling detected general call */ - IX_I2C_SLAVE_READ_DETECTED, /**< polling detected slave read request */ - IX_I2C_SLAVE_WRITE_DETECTED, /**< polling detected slave write request */ - IX_I2C_SLAVE_NO_BUFFER, /**< no buffer provided for slave transfers */ - IX_I2C_DATA_SIZE_ZERO, /**< data size transfer is zero - invalid */ - IX_I2C_SLAVE_WRITE_BUFFER_EMPTY, /**< slave buffer is used till empty */ - IX_I2C_SLAVE_WRITE_ERROR, /**< slave write experienced an error */ - IX_I2C_SLAVE_OR_GEN_READ_BUFFER_FULL, /**< slave buffer is filled up */ - IX_I2C_SLAVE_OR_GEN_READ_ERROR /**< slave read experienced an error */ -} IX_I2C_STATUS; - -/** - * @ingroup IxI2cDrv - * - * @enum IxI2cSpeedMode - * - * @brief Type of speed modes supported by the I2C hardware. - */ -typedef enum -{ - IX_I2C_NORMAL_MODE = 0x0, - IX_I2C_FAST_MODE -} IxI2cSpeedMode; - -/** - * @ingroup IxI2cDrv - * - * @enum IxI2cXferMode - * - * @brief Used for indicating it is a repeated start or normal transfer - */ -typedef enum -{ - IX_I2C_NORMAL = 0x0, - IX_I2C_REPEATED_START -} IxI2cXferMode; - -/** - * @ingroup IxI2cDrv - * - * @enum IxI2cFlowMode - * - * @brief Used for indicating it is a poll or interrupt mode - */ -typedef enum -{ - IX_I2C_POLL_MODE = 0x0, - IX_I2C_INTERRUPT_MODE -} IxI2cFlowMode; - -/** - * @ingroup IxI2cDrv - * - * @enum IxI2cDelayMode - * - * @brief Used for selecting looping delay or OS scheduler delay - */ -typedef enum -{ - IX_I2C_LOOP_DELAY = 1, /**< delay in microseconds */ - IX_I2C_SCHED_DELAY /**< delay in miliseconds */ -} IxI2cDelayMode; - -/** - * @ingroup IxI2cDrv - * - * @brief The pointer to the function that will be called when the master - * has completed its receive. The parameter that is passed will - * provide the status of the read (success, arb loss, or bus - * error), the transfer mode (normal or repeated start, the - * buffer pointer and number of bytes transferred. - */ -typedef void (*IxI2cMasterReadCallbackP)(IxI2cMasterStatus, IxI2cXferMode, char*, UINT32); - -/** - * @ingroup IxI2cDrv - * - * @brief The pointer to the function that will be called when the master - * has completed its transmit. The parameter that is passed will - * provide the status of the write (success, arb loss, or buss - * error), the transfer mode (normal or repeated start), the - * buffer pointer and number of bytes transferred. - */ -typedef void (*IxI2cMasterWriteCallbackP)(IxI2cMasterStatus, IxI2cXferMode, char*, UINT32); - -/** - * @ingroup IxI2cDrv - * - * @brief The pointer to the function that will be called when a slave - * address detected in interrupt mode for a read. The parameters - * that is passed will provide the read status, buffer pointer, - * buffer size, and the bytes received. When a start of a read - * is initiated there will be no buffer allocated and this callback - * will be called to request for a buffer. While receiving, if the - * buffer gets filled, this callback will be called to request for - * a new buffer while sending the filled buffer's pointer and size, - * and data size received. When the receive is complete, this - * callback will be called to process the data and free the memory - * by passing the buffer's pointer and size, and data size received. - */ -typedef void (*IxI2cSlaveReadCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32); - -/** - * @ingroup IxI2cDrv - * - * @brief The pointer to the function that will be called when a slave - * address detected in interrupt mode for a write. The parameters - * that is passed will provide the write status, buffer pointer, - * buffer size, and the bytes received. When a start of a write is - * initiated there will be no buffer allocated and this callback - * will be called to request for a buffer and to fill it with data. - * While transmitting, if the data in the buffer empties, this - * callback will be called to request for more data to be filled in - * the same or new buffer. When the transmit is complete, this - * callback will be called to free the memory or other actions to - * be taken. - */ -typedef void (*IxI2cSlaveWriteCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32); - -/** - * @ingroup IxI2cDrv - * - * @brief The pointer to the function that will be called when a general - * call detected in interrupt mode for a read. The parameters that - * is passed will provide the read status, buffer pointer, buffer - * size, and the bytes received. When a start of a read is - * initiated there will be no buffer allocated and this callback - * will be called to request for a buffer. While receiving, if the - * buffer gets filled, this callback will be called to request for - * a new buffer while sending the filled buffer's pointer and size, - * and data size received. When the receive is complete, this - * callback will be called to process the data and free the memory - * by passing the buffer's pointer and size, and data size received. - */ -typedef void (*IxI2cGenCallCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32); - -/* - * Section for struct - */ - -/** - * @brief contains all the variables required to initialize the I2C unit - * - * Structure to be filled and used for calling initialization - */ -typedef struct -{ - IxI2cSpeedMode I2cSpeedSelect; /** - * NOTE: 1) An individual callback is to be registered for each Slave and Master - * Auxiliary Time Stamp registers. Thus to register for both Master and Slave time - * stamp interrupts either the same callback or two separate callbacks the API has - * to be invoked twice. - * 2) On the IXDP465 Development Platform, the Auxiliary Timestamp signal for - * slave mode is tied to GPIO 8 pin. This signal is software routed by default to - * PCI for backwards compatibility with the IXDP425 Development Platform. This - * routing must be disabled for the auxiliary slave time stamp register to work - * properly. The following commands may be used to accomplish this. However, refer - * to the IXDP465 Development Platform Users Guide or the BSP/LSP documentation for - * more specific information. - * - * For Linux (at the Redboot prompt i.e., before loading zImage): - * mfill -b 0x54100000 -1 -l 1 -p 8 - * mfill -b 0x54100001 -1 -l 1 -p 0x7f - * For vxWorks, at the prompt: - * intDisable(25) - * ixdp400FpgaIODetach(8) - * - * - * @li Re-entrant : no - * @li ISR Callable : no - * - * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful - * @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for callback or - invalid auxiliary snapshot mode - * @li IX_TIMESYNCACC_FAILED - Internal error occurred - */ -PUBLIC IxTimeSyncAccStatus -ixTimeSyncAccAuxTimeInterruptEnable(IxTimeSyncAccAuxMode auxMode, - IxTimeSyncAccAuxTimeCallback auxTimeCallback); - -/** - * @ingroup IxTimeSyncAcc - * - * @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimeInterruptDisable( - IxTimeSyncAccAuxMode auxMode) - * - * @brief Disables the interrupt for the indicated mode of Auxiliary Time Stamp - * in the IEEE 1588 hardware assist block - * - * @param auxMode [in] - Auxiliary time stamp mode (slave or master) using which - * the interrupt will be disabled. - * - * This API will disable the Auxiliary Time Stamp Interrupt (Master or Slave) - * - * @li Re-entrant : yes - * @li ISR Callable : no - * - * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful - * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed - * @li IX_TIMESYNCACC_FAILED - Internal error occurred - */ -PUBLIC IxTimeSyncAccStatus -ixTimeSyncAccAuxTimeInterruptDisable(IxTimeSyncAccAuxMode auxMode); - -/** - * @ingroup IxTimeSyncAcc - * - * @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimePoll( - IxTimeSyncAccAuxMode auxMode, - BOOL *auxPollFlag, - IxTimeSyncAccTimeValue *auxTime) - * - * @brief Poll for the Auxiliary Time Stamp captured for the mode indicated - * (Master or Slave) - * - * @param auxMode [in] - Auxiliary Snapshot Register (Slave or Master) to be checked - * @param auxPollFlag [out] - true if the time stamp captured in auxiliary - snapshot register - * false if the time stamp not captured in - auxiliary snapshot register - * @param auxTime [out] - Copy the current Auxiliary Snapshot Register value into the - * client provided buffer - * - * Polls for the Time stamp in the appropriate Auxiliary Snapshot Registers based - * on the mode specified. Return true and the contents of the Auxiliary snapshot, - * if it is available else return false. - * - * Please refer to the note #2 of the API @ref ixTimeSyncAccAuxTimeInterruptEnable - * for more information for Auxiliary Slave mode. - * - * @li Re-entrant : yes - * @li ISR Callable : no - * - * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful - * @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for auxPollFlag, - callback or invalid auxiliary snapshot mode - * @li IX_TIMESYNCACC_FAILED - Internal error occurred - * @li IX_TIMESYNCACC_INTERRUPTMODEINUSE - Interrupt mode in use - */ -PUBLIC IxTimeSyncAccStatus -ixTimeSyncAccAuxTimePoll(IxTimeSyncAccAuxMode auxMode, - BOOL *auxPollFlag, - IxTimeSyncAccTimeValue *auxTime); - -/** - * @ingroup IxTimeSyncAcc - * - * @fn IxTimeSyncAccStatus ixTimeSyncAccReset(void) - * - * @brief Resets the IEEE 1588 hardware assist block - * - * Sets the reset bit in the IEEE1588 silicon which fully resets the silicon block - * - * @li Reentrant : yes - * @li ISR Callable : no - * - * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful - * @li IX_TIMESYNCACC_FAILED - Internal error occurred - */ -PUBLIC IxTimeSyncAccStatus -ixTimeSyncAccReset(void); - -/** - * @ingroup IxTimeSyncAcc - * - * @fn IxTimeSyncAccStatus ixTimeSyncAccStatsGet(IxTimeSyncAccStats - *timeSyncStats) - * - * @brief Returns the IxTimeSyncAcc Statistics in the client supplied buffer - * - * @param timeSyncStats [out] - TimeSync statistics counter values - * - * This API will return the statistics of the received or transmitted messages. - * - * NOTE: 1) These counters are updated only when the client polls for the time - * stamps or interrupt are enabled. This is because the IxTimeSyncAcc module - * does not either transmit or receive messages and does only run the code - * when explicit requests received by client application. - * - * 2) These statistics reflect the number of valid PTP messages exchanged - * in Master and Slave modes but includes all the messages (including valid - * non-PTP messages) while operating in the Any mode. - * - * @li Reentrant : no - * @li ISR Callable : no - * - * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful - * @li IX_TIMESYNCACC_INVALIDPARAM - NULL parameter passed - * @li IX_TIMESYNCACC_FAILED - Internal error occurred - */ -PUBLIC IxTimeSyncAccStatus -ixTimeSyncAccStatsGet(IxTimeSyncAccStats *timeSyncStats); - -/** - * @ingroup IxTimeSyncAcc - * - * @fn void ixTimeSyncAccStatsReset(void) - * - * @brief Reset Time Sync statistics - * - * This API will reset the statistics counters of the TimeSync access layer. - * - * @li Reentrant : yes - * @li ISR Callable: no - * - * @return @li None - */ -PUBLIC void -ixTimeSyncAccStatsReset(void); - -/** - * @ingroup IxTimeSyncAcc - * - * @fn IxTimeSyncAccStatus ixTimeSyncAccShow(void) - * - * @brief Displays the Time Sync current status - * - * This API will display status on the current configuration of the IEEE - * 1588 hardware assist block, contents of the various time stamp registers, - * outstanding interrupts and/or events. - * - * Note that this is intended for debug only, and in contrast to the other - * functions, it does not clear the any of the status bits associated with - * active timestamps and so is passive in its nature. - * - * @li Reentrant : yes - * @li ISR Callable : no - * - * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful - * @li IX_TIMESYNCACC_FAILED - Internal error occurred - */ -PUBLIC IxTimeSyncAccStatus -ixTimeSyncAccShow(void); - -#endif /* __ixp46X */ -#endif /* IXTIMESYNCACC_H */ - -/** - * @} defgroup IxTimeSyncAcc - */ - diff --git a/drivers/net/npe/include/IxTimerCtrl.h b/drivers/net/npe/include/IxTimerCtrl.h deleted file mode 100644 index a865b933a3..0000000000 --- a/drivers/net/npe/include/IxTimerCtrl.h +++ /dev/null @@ -1,239 +0,0 @@ -/** - * @file IxTimerCtrl.h - * @brief - * This is the header file for the Timer Control component. - * - * The timer callback control component provides a mechanism by which different - * client components can start a timer and have a supplied callback function - * invoked when the timer expires. - * The callbacks are all dispatched from one thread inside this component. - * Any component that needs to be called periodically should use this facility - * rather than create its own task with a sleep loop. - * - * @par - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/** - * @defgroup IxTimerCtrl IXP400 Timer Control (IxTimerCtrl) API - * - * @brief The public API for the IXP400 Timer Control Component. - * - * @{ - */ - -#ifndef IxTimerCtrl_H -#define IxTimerCtrl_H - - -#include "IxTypes.h" -/* #include "Ossl.h" */ - -/* - * #defines and macros used in this file. - */ - -/** - * @ingroup IxTimerCtrl - * - * @def IX_TIMERCTRL_NO_FREE_TIMERS - * - * @brief Timer schedule return code. - * - * Indicates that the request to start a timer failed because - * all available timer resources are used. - */ -#define IX_TIMERCTRL_NO_FREE_TIMERS 2 - - -/** - * @ingroup IxTimerCtrl - * - * @def IX_TIMERCTRL_PARAM_ERROR - * - * @brief Timer schedule return code. - * - * Indicates that the request to start a timer failed because - * the client has supplied invalid parameters. - */ -#define IX_TIMERCTRL_PARAM_ERROR 3 - - -/* - * Typedefs whose scope is limited to this file. - */ - -/** - * @ingroup IxTimerCtrl - * - * @brief A typedef for a pointer to a timer callback function. - * @para void * - This parameter is supplied by the client when the - * timer is started and passed back to the client in the callback. - * @note in general timer callback functions should not block or - * take longer than 100ms. This constraint is required to ensure that - * higher priority callbacks are not held up. - * All callbacks are called from the same thread. - * This thread is a shared resource. - * The parameter passed is provided when the timer is scheduled. - */ -typedef void (*IxTimerCtrlTimerCallback)(void *userParam); - - -/** - * @ingroup IxTimerCtrl - * - * @brief List used to identify the users of timers. - * @note The order in this list indicates priority. Components appearing - * higher in the list will be given priority over components lower in the - * list. When adding components, please insert at an appropriate position - * for priority ( i.e values should be less than IxTimerCtrlMaxPurpose ) . - */ -typedef enum -{ - IxTimerCtrlAdslPurpose, - /* Insert new purposes above this line only - */ - IxTimerCtrlMaxPurpose -} -IxTimerCtrlPurpose; - - -/* - * Function definition - */ - -/** - * @ingroup IxTimerCtrl - * - * @fn ixTimerCtrlSchedule(IxTimerCtrlTimerCallback func, - void *userParam, - IxTimerCtrlPurpose purpose, - UINT32 relativeTime, - unsigned *timerId ) - * - * @brief Schedules a callback function to be called after a period of "time". - * The callback function should not block or run for more than 100ms. - * This function - * - * @param func @ref IxTimerCtrlTimerCallback [in] - the callback function to be called. - * @param userParam void [in] - a parameter to send to the callback function, can be NULL. - * @param purpose @ref IxTimerCtrlPurpose [in] - the purpose of the callback, internally this component will - * decide the priority of callbacks with different purpose. - * @param relativeTime UINT32 [in] - time relative to now in milliseconds after which the callback - * will be called. The time must be greater than the duration of one OS tick. - * @param *timerId unsigned [out] - An id for the callback scheduled. - * This id can be used to cancel the callback. - * @return - * @li IX_SUCCESS - The timer was started successfully. - * @li IX_TIMERCTRL_NO_FREE_TIMERS - The timer was not started because the maximum number - * of running timers has been exceeded. - * @li IX_TIMERCTRL_PARAM_ERROR - The timer was not started because the client has supplied - * a NULL callback func, or the requested timeout is less than one OS tick. - * @note This function is re-entrant. The function accesses a list of running timers - * and may suspend the calling thread if this list is being accesed by another thread. - */ -PUBLIC IX_STATUS -ixTimerCtrlSchedule(IxTimerCtrlTimerCallback func, - void *userParam, - IxTimerCtrlPurpose purpose, - UINT32 relativeTime, - unsigned *timerId ); - - -/** - * @ingroup IxTimerCtrl - * - * @fn ixTimerCtrlScheduleRepeating(IxTimerCtrlTimerCallback func, - void *param, - IxTimerCtrlPurpose purpose, - UINT32 interval, - unsigned *timerId ) - * - * @brief Schedules a callback function to be called after a period of "time". - * The callback function should not block or run for more than 100ms. - * - * @param func @ref IxTimerCtrlTimerCallback [in] - the callback function to be called. - * @param userParam void [in] - a parameter to send to the callback function, can be NULL. - * @param purpose @ref IxTimerCtrlPurpose [in] - the purpose of the callback, internally this component will - * decide the priority of callbacks with different purpose. - * @param interval UINT32 [in] - the interval in milliseconds between calls to func. - * @param timerId unsigned [out] - An id for the callback scheduled. - * This id can be used to cancel the callback. - * @return - * @li IX_SUCCESS - The timer was started successfully. - * @li IX_TIMERCTRL_NO_FREE_TIMERS - The timer was not started because the maximum number - * of running timers has been exceeded. - * @li IX_TIMERCTRL_PARAM_ERROR - The timer was not started because the client has supplied - * a NULL callback func, or the requested timeout is less than one OS tick. - * @note This function is re-entrant. The function accesses a list of running timers - * and may suspend the calling thread if this list is being accesed by another thread. - */ -PUBLIC IX_STATUS -ixTimerCtrlScheduleRepeating(IxTimerCtrlTimerCallback func, - void *param, - IxTimerCtrlPurpose purpose, - UINT32 interval, - unsigned *timerId ); - -/** - * @ingroup IxTimerCtrl - * - * @fn ixTimerCtrlCancel (unsigned id) - * - * @brief Cancels a scheduled callback. - * - * @param id unsigned [in] - the id of the callback to be cancelled. - * @return - * @li IX_SUCCESS - The timer was successfully stopped. - * @li IX_FAIL - The id parameter did not corrrespond to any running timer.. - * @note This function is re-entrant. The function accesses a list of running timers - * and may suspend the calling thread if this list is being accesed by another thread. - */ -PUBLIC IX_STATUS -ixTimerCtrlCancel (unsigned id); - -/** - * @ingroup IxTimerCtrl - * - * @fn ixTimerCtrlInit(void) - * - * @brief Initialise the Timer Control Component. - * @return - * @li IX_SUCCESS - The timer control component initialized successfully. - * @li IX_FAIL - The timer control component initialization failed, - * or the component was already initialized. - * @note This must be done before any other API function is called. - * This function should be called once only and is not re-entrant. - */ -PUBLIC IX_STATUS -ixTimerCtrlInit(void); - - -/** - * @ingroup IxTimerCtrl - * - * @fn ixTimerCtrlShow( void ) - * - * @brief Display the status of the Timer Control Component. - * @return void - * @note Displays a list of running timers. - * This function is not re-entrant. This function does not suspend the calling thread. - */ -PUBLIC void -ixTimerCtrlShow( void ); - -#endif /* IXTIMERCTRL_H */ - diff --git a/drivers/net/npe/include/IxTypes.h b/drivers/net/npe/include/IxTypes.h deleted file mode 100644 index f936a50bb3..0000000000 --- a/drivers/net/npe/include/IxTypes.h +++ /dev/null @@ -1,62 +0,0 @@ -/** - * @file IxTypes.h (Replaced by OSAL) - * - * @date 28-NOV-2001 - - * @brief This file contains basic types used by the IXP400 software - * - * Design Notes: - * This file shall only include fundamental types and definitions to be - * shared by all the IXP400 components. - * Please DO NOT add component-specific types here. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/** - * @defgroup IxTypes IXP400 Types (IxTypes) - * - * @brief Basic data types used by the IXP400 project - * - * @{ - */ - -#ifndef IxTypes_H - -#ifndef __doxygen_HIDE - -#define IxTypes_H - -#endif /* __doxygen_HIDE */ - - -/* WR51880: Undefined data types workaround for backward compatibility */ -#ifdef __linux -#ifndef __INCvxTypesOldh -typedef int (*FUNCPTR)(void); -typedef int STATUS; -#define OK (0) -#define ERROR (-1) -#endif -#endif - -#include "IxOsalBackward.h" - -#endif /* IxTypes_H */ - -/** - * @} addtogroup IxTypes - */ diff --git a/drivers/net/npe/include/IxUART.h b/drivers/net/npe/include/IxUART.h deleted file mode 100644 index ff23b22fe7..0000000000 --- a/drivers/net/npe/include/IxUART.h +++ /dev/null @@ -1,434 +0,0 @@ -/** - * @file IxUART.h - * - * @date 12-OCT-01 - * - * @brief Public header for the Intel IXP400 internal UART, generic driver. - * - * Design Notes: - * This driver allows you to perform the following functions: - * Device Initialization, - * send/receive characters. - * - * Perform Uart IOCTL for the following: - * Set/Get the current baud rate, - * set parity, - * set the number of Stop bits, - * set the character Length (5,6,7,8), - * enable/disable Hardware flow control. - * - * Only Polled mode is supported for now. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - -/** - * @defgroup IxUARTAccAPI IXP400 UART Access (IxUARTAcc) API - * - * @brief IXP400 UARTAcc Driver Public API - * - * @{ - */ - - -/* Defaults */ - -/** - * @defgroup DefaultDefines Defines for Default Values - * - * @brief Default values which can be used for UART configuration - * - * @sa ixUARTDev - */ - -/** - * @def IX_UART_DEF_OPTS - * - * @brief The default hardware options to set the UART to - - * no flow control, 8 bit word, 1 stop bit, no parity - * - * @ingroup DefaultDefines - */ -#define IX_UART_DEF_OPTS (CLOCAL | CS8) - -/** - * @def IX_UART_DEF_XMIT - * - * @brief The default UART FIFO size - must be no bigger than 64 - * - * @ingroup DefaultDefines - */ -#define IX_UART_DEF_XMIT 64 - -/** - * @def IX_UART_DEF_BAUD - * - * @brief The default UART baud rate - 9600 - * - * @ingroup DefaultDefines - */ -#define IX_UART_DEF_BAUD 9600 - -/** - * @def IX_UART_MIN_BAUD - * - * @brief The minimum UART baud rate - 9600 - * - * @ingroup DefaultDefines - */ -#define IX_UART_MIN_BAUD 9600 - -/** - * @def IX_UART_MAX_BAUD - * - * @brief The maximum UART baud rate - 926100 - * - * @ingroup DefaultDefines - */ -#define IX_UART_MAX_BAUD 926100 - -/** - * @def IX_UART_XTAL - * - * @brief The UART clock speed - * - * @ingroup DefaultDefines - */ -#define IX_UART_XTAL 14745600 - - - -/* IOCTL commands (Request codes) */ - -/** - * @defgroup IoctlCommandDefines Defines for IOCTL Commands - * - * @brief IOCTL Commands (Request codes) which can be used - * with @ref ixUARTIoctl - */ - - -/** - * @ingroup IoctlCommandDefines - * - * @def IX_BAUD_SET - * - * @brief Set the baud rate - */ -#define IX_BAUD_SET 0 - -/** - * @ingroup IoctlCommandDefines - * - * @def IX_BAUD_GET - * - * @brief Get the baud rate - */ -#define IX_BAUD_GET 1 - -/** - * @ingroup IoctlCommandDefines - * @def IX_MODE_SET - * @brief Set the UART mode of operation - */ -#define IX_MODE_SET 2 - -/** - * @ingroup IoctlCommandDefines - * - * @def IX_MODE_GET - * - * @brief Get the current UART mode of operation - */ -#define IX_MODE_GET 3 - -/** - * @ingroup IoctlCommandDefines - * - * @def IX_OPTS_SET - * - * @brief Set the UART device options - */ -#define IX_OPTS_SET 4 - -/** - * @ingroup IoctlCommandDefines - * - * @def IX_OPTS_GET - * - * @brief Get the UART device options - */ -#define IX_OPTS_GET 5 - -/** - * @ingroup IoctlCommandDefines - * - * @def IX_STATS_GET - * - * @brief Get the UART statistics - */ -#define IX_STATS_GET 6 - - -/* POSIX style ioctl arguments */ - -/** - * @defgroup IoctlArgDefines Defines for IOCTL Arguments - * - * @brief POSIX style IOCTL arguments which can be used - * with @ref ixUARTIoctl - * - * @sa ixUARTMode - */ - - -/** - * @ingroup IoctlArgDefines - * - * @def CLOCAL - * - * @brief Software flow control - */ -#ifdef CLOCAL -#undef CLOCAL -#endif -#define CLOCAL 0x1 - -/** - * @ingroup IoctlArgDefines - * - * @def CREAD - * - * @brief Enable interrupt receiver - */ -#ifdef CREAD -#undef CREAD -#endif -#define CREAD 0x2 - -/** - * @ingroup IoctlArgDefines - * - * @def CSIZE - * - * @brief Characters size - */ -#ifdef CSIZE -#undef CSIZE -#endif -#define CSIZE 0xc - -/** - * @ingroup IoctlArgDefines - * - * @def CS5 - * - * @brief 5 bits - */ -#ifdef CS5 -#undef CS5 -#endif -#define CS5 0x0 - -/** - * @ingroup IoctlArgDefines - * - * @def CS6 - * - * @brief 6 bits - */ -#ifdef CS6 -#undef CS6 -#endif -#define CS6 0x4 - -/** - * @ingroup IoctlArgDefines - * - * @def CS7 - * - * @brief 7 bits - */ -#ifdef CS7 -#undef CS7 -#endif -#define CS7 0x8 - -/** - * @ingroup IoctlArgDefines - * - * @def CS8 - * - * @brief 8 bits - */ -#ifdef CS8 -#undef CS8 -#endif -#define CS8 0xc - -/** - * @ingroup IoctlArgDefines - * - * @def STOPB - * - * @brief Send two stop bits (else one) - */ -#define STOPB 0x20 - -/** - * @ingroup IoctlArgDefines - * - * @def PARENB - * - * @brief Parity detection enabled (else disabled) - */ -#ifdef PARENB -#undef PARENB -#endif -#define PARENB 0x40 - -/** - * @ingroup IoctlArgDefines - * - * @def PARODD - * - * @brief Odd parity (else even) - */ -#ifdef PARODD -#undef PARODD -#endif -#define PARODD 0x80 - -/** - * @enum ixUARTMode - * @brief The mode to set to UART to. - */ -typedef enum -{ - INTERRUPT=0, /**< Interrupt mode */ - POLLED, /**< Polled mode */ - LOOPBACK /**< Loopback mode */ -} ixUARTMode; - -/** - * @struct ixUARTStats - * @brief Statistics for the UART. - */ -typedef struct -{ - UINT32 rxCount; - UINT32 txCount; - UINT32 overrunErr; - UINT32 parityErr; - UINT32 framingErr; - UINT32 breakErr; -} ixUARTStats; - -/** - * @struct ixUARTDev - * @brief Device descriptor for the UART. - */ -typedef struct -{ - UINT8 *addr; /**< device base address */ - ixUARTMode mode; /**< interrupt, polled or loopback */ - int baudRate; /**< baud rate */ - int freq; /**< UART clock frequency */ - int options; /**< hardware options */ - int fifoSize; /**< FIFO xmit size */ - - ixUARTStats stats; /**< device statistics */ -} ixUARTDev; - -/** - * @ingroup IxUARTAccAPI - * - * @fn IX_STATUS ixUARTInit(ixUARTDev* pUART) - * - * @param pUART @ref ixUARTDev [in] - pointer to UART structure describing our device. - * - * @brief Initialise the UART. This puts the chip in a quiescent state. - * - * @pre The base address for the UART must contain a valid value. - * Also the baud rate and hardware options must contain sensible values - * otherwise the defaults will be used as defined in ixUART.h - * - * @post UART is initialized and ready to send and receive data. - * - * @note This function should only be called once per device. - * - * @retval IX_SUCCESS - UART device successfully initialised. - * @retval IX_FAIL - Critical error, device not initialised. - ***************************************************************************/ -PUBLIC IX_STATUS ixUARTInit(ixUARTDev* pUART); - -/** - * @ingroup IxUARTAccAPI - * - * @fn IX_STATUS ixUARTPollOutput(ixUARTDev* pUART, int outChar) - * - * @param pUART @ref ixUARTDev [out] - pointer to UART structure describing our device. - * @param outChar int [out] - character to transmit. - * - * @brief Transmit a character in polled mode. - * - * @pre UART device must be initialised. - * - * @retval IX_SUCCESS - character was successfully transmitted. - * @retval IX_FAIL - output buffer is full (try again). - ***************************************************************************/ -PUBLIC IX_STATUS ixUARTPollOutput(ixUARTDev* pUART, int outChar); - -/** - * @ingroup IxUARTAccAPI - * - * @fn IX_STATUS ixUARTPollInput(ixUARTDev* pUART, char *inChar) - * - * @param pUART @ref ixUARTDev [in] - pointer to UART structure describing our device. - * @param *inChar char [in] - character read from the device. - * - * @brief Receive a character in polled mode. - * - * @pre UART device must be initialised. - * - * @retval IX_SUCCESS - character was successfully read. - * @retval IX_FAIL - input buffer empty (try again). - ***************************************************************************/ -PUBLIC IX_STATUS ixUARTPollInput(ixUARTDev* pUART, char *inChar); - -/** - * @ingroup IxUARTAccAPI - * - * @fn IX_STATUS ixUARTIoctl(ixUARTDev* pUART, int cmd, void* arg) - * - * @param pUART @ref ixUARTDev [in] - pointer to UART structure describing our device. - * @param cmd int [in] - an ioctl request code. - * @param arg void* [in] - optional argument used to set the device mode, - * baud rate, and hardware options. - * - * @brief Perform I/O control routines on the device. - * - * @retval IX_SUCCESS - requested feature was set/read successfully. - * @retval IX_FAIL - error setting/reading the requested feature. - * - * @sa IoctlCommandDefines - * @sa IoctlArgDefines - ***************************************************************************/ -PUBLIC IX_STATUS ixUARTIoctl(ixUARTDev* pUART, int cmd, void* arg); - -/** - * @} defgroup IxUARTAcc - */ diff --git a/drivers/net/npe/include/IxVersionId.h b/drivers/net/npe/include/IxVersionId.h deleted file mode 100644 index 1769dcda45..0000000000 --- a/drivers/net/npe/include/IxVersionId.h +++ /dev/null @@ -1,131 +0,0 @@ -/** - * @file IxVersionId.h - * - * @date 22-Aug-2002 - * - * @brief This file contains the IXP400 Software version identifier - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/** - * @defgroup IxVersionId IXP400 Version ID (IxVersionId) - * - * @brief Version Identifiers - * - * @{ - */ - -#ifndef IXVERSIONID_H -#define IXVERSIONID_H - -/** - * @brief Version Identifier String - * - * This string will be updated with each customer release of the IXP400 - * Software. - */ -#define IX_VERSION_ID "2_0" - -/** - * This string will be updated with each customer release of the IXP400 - * ADSL driver package. - */ -#define IX_VERSION_ADSL_ID "1_12" - - -/** - * This string will be updated with each customer release of the IXP400 - * USB Client driver package. - */ -#define IX_VERSION_USBRNDIS_ID "1_9" - -/** - * This string will be updated with each customer release of the IXP400 - * I2C Linux driver package. - */ -#define IX_VERSION_I2C_LINUX_ID "1_0" - -/** - * @brief Linux Ethernet Driver Patch Version Identifier String - * - * This string will be updated with each release of Linux Ethernet Patch - */ -#define LINUX_ETHERNET_DRIVER_PATCH_ID "1_4" - -/** - * @brief Linux Integration Patch Version Identifier String - * - * This String will be updated with each release of Linux Integration Patch - */ -#define LINUX_INTEGRATION_PATCH_ID "1_3" - -/** - * @brief Linux Ethernet Readme version Identifier String - * - * This string will be updated with each release of Linux Ethernet Readme - */ -#define LINUX_ETHERNET_README_ID "1_3" - -/** - * @brief Linux Integration Readme version Identifier String - * - * This string will be updated with each release of Linux Integration Readme - */ - -#define LINUX_INTEGRATION_README_ID "1_3" - -/** - * @brief Linux I2C driver Readme version Identifier String - * - * This string will be updated with each release of Linux I2C Driver Readme - */ -#define LINUX_I2C_DRIVER_README_ID "1_0" - -/** - * @brief ixp425_eth_update_nf_bridge.patch version Identifier String - * - * This string will be updated with each release of ixp425_eth_update_nf_bridge. -patch - * - */ - -#define IXP425_ETH_UPDATE_NF_BRIDGE_ID "1_3" - -/** - * @brief Internal Release Identifier String - * - * This string will be updated with each internal release (SQA drop) - * of the IXP400 Software. - */ -#define IX_VERSION_INTERNAL_ID "SQA3_5" - -/** - * @brief Compatible Tornado Version Identifier - */ -#define IX_VERSION_COMPATIBLE_TORNADO "Tornado2_2_1-PNE2_0" - -/** - * @brief Compatible Linux Version Identifier - */ -#define IX_VERSION_COMPATIBLE_LINUX "MVL3_1" - - -#endif /* IXVERSIONID_H */ - -/** - * @} addtogroup IxVersionId - */ diff --git a/drivers/net/npe/include/ix_error.h b/drivers/net/npe/include/ix_error.h deleted file mode 100644 index 4c599996cf..0000000000 --- a/drivers/net/npe/include/ix_error.h +++ /dev/null @@ -1,42 +0,0 @@ -/** - * ============================================================================ - * = COPYRIGHT - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - * = PRODUCT - * Intel(r) IXP425 Software Release - * - * = FILENAME - * ix_error.h (Replaced by OSAL) - * - * = DESCRIPTION - * This file will describe the basic error type and support functions that - * will be used by the IXA SDK Framework API. - * - * = AUTHOR - * Intel Corporation - * - * = CHANGE HISTORY - * 4/22/2002 4:19:03 PM - creation time - * ============================================================================ - */ - -#if !defined(__IX_ERROR_H__) -#define __IX_ERROR_H__ - -#include "IxOsalBackward.h" - -#endif /* end !defined(__IX_ERROR_H__) */ - diff --git a/drivers/net/npe/include/ix_macros.h b/drivers/net/npe/include/ix_macros.h deleted file mode 100644 index b4cf7602ae..0000000000 --- a/drivers/net/npe/include/ix_macros.h +++ /dev/null @@ -1,242 +0,0 @@ -/** - * ============================================================================ - * = COPYRIGHT - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - * = PRODUCT - * Intel(r) IXP425 Software Release - * - * = FILENAME - * ix_macros.h - * - * = DESCRIPTION - * This file will define the basic preprocessor macros that are going to be used - * the IXA SDK Framework API. - * - * = AUTHOR - * Intel Corporation - * - * = CHANGE HISTORY - * 4/22/2002 4:41:05 PM - creation time - * ============================================================================ - */ - -#if !defined(__IX_MACROS_H__) -#define __IX_MACROS_H__ - - -#if defined(__cplusplus) -extern "C" -{ -#endif /* end defined(__cplusplus) */ - - -/** - * MACRO NAME: IX_BIT_FIELD_MASK16 - * - * DESCRIPTION: Builds the mask required to extract the bit field from a 16 bit unsigned integer value. - * - * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant - * bit of the bit field. - * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant - * bit of the bit field. - * - * @Return: Returns a 16 bit mask that will extract the bit field from a 16 bit unsigned integer value. - */ -#define IX_BIT_FIELD_MASK16( \ - arg_FieldLSBBit, \ - arg_FieldMSBBit \ - ) \ - ((ix_bit_mask16)((((ix_uint16)1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - \ - (ix_uint16)1) << arg_FieldLSBBit)) - - - -/** - * MACRO NAME: IX_GET_BIT_FIELD16 - * - * DESCRIPTION: Extracts a bit field from 16 bit unsigned integer. The returned value is normalized in - * in the sense that will be right aligned. - * - * @Param: - IN arg_PackedData16 a 16 bit unsigned integer that contains the bit field of interest. - * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant - * bit of the bit field. - * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant - * bit of the bit field. - * - * @Return: Returns the value of the bit field. The value can be from 0 to (1 << (arg_FieldMSBBit + 1 - - * arg_FieldLSBBit)) - 1. - */ -#define IX_GET_BIT_FIELD16( \ - arg_PackedData16, \ - arg_FieldLSBBit, \ - arg_FieldMSBBit \ - ) \ - (((ix_uint16)(arg_PackedData16) & IX_BIT_FIELD_MASK16(arg_FieldLSBBit, arg_FieldMSBBit)) >> \ - arg_FieldLSBBit) - - -/** - * MACRO NAME: IX_MAKE_BIT_FIELD16 - * - * DESCRIPTION: This macro will create a temporary 16 bit value with the bit field - * desired set to the desired value. - * - * @Param: - IN arg_BitFieldValue is the new value of the bit field. The value can be from 0 to - * (1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - 1. - * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant - * bit of the bit field. - * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant - * bit of the bit field. - * - * @Return: Returns a temporary ix_uint16 value that has the bit field set to the appropriate value. - */ -#define IX_MAKE_BIT_FIELD16( \ - arg_BitFieldValue, \ - arg_FieldLSBBit, \ - arg_FieldMSBBit \ - ) \ - (((ix_uint16)(arg_BitFieldValue) << arg_FieldLSBBit) & \ - IX_BIT_FIELD_MASK16(arg_FieldLSBBit, arg_FieldMSBBit)) - -/** - * MACRO NAME: IX_SET_BIT_FIELD16 - * - * DESCRIPTION: Sets a new value for a bit field from a 16 bit unsigned integer. - * - * @Param: - IN arg_PackedData16 a 16 bit unsigned integer that contains the bit field of interest. - * @Param: - IN arg_BitFieldValue is the new vale of the bit field. The value can be from 0 to - * (1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - 1. - * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant - * bit of the bit field. - * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant - * bit of the bit field. - * - * @Return: Returns the updated value of arg_PackedData16. - */ -#define IX_SET_BIT_FIELD16( \ - arg_PackedData16, \ - arg_BitFieldValue, \ - arg_FieldLSBBit, \ - arg_FieldMSBBit \ - ) \ - (arg_PackedData16 = (((ix_uint16)(arg_PackedData16) & \ - ~(IX_BIT_FIELD_MASK16(arg_FieldLSBBit, arg_FieldMSBBit))) | \ - IX_MAKE_BIT_FIELD16(arg_BitFieldValue, arg_FieldLSBBit, arg_FieldMSBBit))) - - -/** - * MACRO NAME: IX_BIT_FIELD_MASK32 - * - * DESCRIPTION: Builds the mask required to extract the bit field from a 32 bit unsigned integer value. - * - * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant - * bit of the bit field. - * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant - * bit of the bit field. - * - * @Return: Returns a 32 bit mask that will extract the bit field from a 32 bit unsigned integer value. - */ -#define IX_BIT_FIELD_MASK32( \ - arg_FieldLSBBit, \ - arg_FieldMSBBit \ - ) \ - ((ix_bit_mask32)((((ix_uint32)1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - \ - (ix_uint32)1) << arg_FieldLSBBit)) - - - -/** - * MACRO NAME: IX_GET_BIT_FIELD32 - * - * DESCRIPTION: Extracts a bit field from 32 bit unsigned integer. The returned value is normalized in - * in the sense that will be right aligned. - * - * @Param: - IN arg_PackedData32 a 32 bit unsigned integer that contains the bit field of interest. - * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant - * bit of the bit field. - * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant - * bit of the bit field. - * - * @Return: Returns the value of the bit field. The value can be from 0 to (1 << (arg_FieldMSBBit + 1 - - * arg_FieldLSBBit)) - 1. - */ -#define IX_GET_BIT_FIELD32( \ - arg_PackedData32, \ - arg_FieldLSBBit, \ - arg_FieldMSBBit \ - ) \ - (((ix_uint32)(arg_PackedData32) & IX_BIT_FIELD_MASK32(arg_FieldLSBBit, arg_FieldMSBBit)) >> \ - arg_FieldLSBBit) - - - - -/** - * MACRO NAME: IX_MAKE_BIT_FIELD32 - * - * DESCRIPTION: This macro will create a temporary 32 bit value with the bit field - * desired set to the desired value. - * - * @Param: - IN arg_BitFieldValue is the new value of the bit field. The value can be from 0 to - * (1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - 1. - * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant - * bit of the bit field. - * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant - * bit of the bit field. - * - * @Return: Returns a temporary ix_uint32 value that has the bit field set to the appropriate value. - */ -#define IX_MAKE_BIT_FIELD32( \ - arg_BitFieldValue, \ - arg_FieldLSBBit, \ - arg_FieldMSBBit \ - ) \ - (((ix_uint32)(arg_BitFieldValue) << arg_FieldLSBBit) & \ - IX_BIT_FIELD_MASK32(arg_FieldLSBBit, arg_FieldMSBBit)) - - -/** - * MACRO NAME: IX_SET_BIT_FIELD32 - * - * DESCRIPTION: Sets a new value for a bit field from a 32 bit unsigned integer. - * - * @Param: - IN arg_PackedData32 a 32 bit unsigned integer that contains the bit field of interest. - * @Param: - IN arg_BitFieldValue is the new value of the bit field. The value can be from 0 to - * (1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - 1. - * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant - * bit of the bit field. - * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant - * bit of the bit field. - * - * @Return: Returns the updated value of arg_PackedData32. - */ -#define IX_SET_BIT_FIELD32( \ - arg_PackedData32, \ - arg_BitFieldValue, \ - arg_FieldLSBBit, \ - arg_FieldMSBBit \ - ) \ - (arg_PackedData32 = (((ix_uint32)(arg_PackedData32) & \ - ~(IX_BIT_FIELD_MASK32(arg_FieldLSBBit, arg_FieldMSBBit))) | \ - IX_MAKE_BIT_FIELD32(arg_BitFieldValue, arg_FieldLSBBit, arg_FieldMSBBit))) - - - -#if defined(__cplusplus) -} -#endif /* end defined(__cplusplus) */ - -#endif /* end !defined(__IX_MACROS_H__) */ diff --git a/drivers/net/npe/include/ix_os_type.h b/drivers/net/npe/include/ix_os_type.h deleted file mode 100644 index e14d561c28..0000000000 --- a/drivers/net/npe/include/ix_os_type.h +++ /dev/null @@ -1,41 +0,0 @@ -/** - * ============================================================================ - * = COPYRIGHT - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - * = PRODUCT - * Intel(r) IXP425 Software Release - * - * = FILENAME - * ix_os_type.h (Replaced by OSAL) - * - * = DESCRIPTION - * This file provides protable symbol definitions for the current OS type. - * - * = AUTHOR - * Intel Corporation - * - * = CHANGE HISTORY - * 4/22/2002 4:43:30 PM - creation time - * ============================================================================ - */ - -#if !defined(__IX_OS_TYPE_H__) -#define __IX_OS_TYPE_H__ - -#include "IxOsalBackward.h" - -#endif /* end !defined(__IX_OS_TYPE_H__) */ - diff --git a/drivers/net/npe/include/ix_ossl.h b/drivers/net/npe/include/ix_ossl.h deleted file mode 100644 index eaa2629b8d..0000000000 --- a/drivers/net/npe/include/ix_ossl.h +++ /dev/null @@ -1,136 +0,0 @@ -/** - * ============================================================================ - * = COPYRIGHT - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - * = PRODUCT - * Intel(r) IXP425 Software Release - * - * = LIBRARY - * OSSL - Operating System Services Library - * - * = MODULE - * OSSL Abstraction layer header file - * - * = FILENAME - * ix_ossl.h (Replaced by OSAL) - * - * = DESCRIPTION - * This file contains the prototypes of OS-independent wrapper - * functions which allow the programmer not to be tied to a specific - * operating system. The OSSL functions can be divided into three classes: - * - * 1) synchronization-related wrapper functions around thread system calls - * 2) thread-related wrapper functions around thread calls - * 3) transactor/workbench osapi calls -- defined in osApi.h - * - * Both 1 and 2 classes of functions provide Thread Management, Thread - * Synchronization, Mutual Exclusion and Timer primitives. Namely, - * creation and deletion functions as well as the standard "wait" and - * "exit". Additionally, a couple of utility functions which enable to - * pause the execution of a thread are also provided. - * - * The 3rd class provides a slew of other OSAPI functions to handle - * Transactor/WorkBench OS calls. - * - * - * OSSL Thread APIs: - * The OSSL thread functions that allow for thread creation, - * get thread id, thread deletion and set thread priroity. - * - * ix_ossl_thread_create - * ix_ossl_thread_get_id - * ix_ossl_thread_exit - * ix_ossl_thread_kill - * ix_ossl_thread_set_priority - * ix_ossl_thread__delay - * - * OSSL Semaphore APIs: - * The OSSL semaphore functions that allow for initialization, - * posting, waiting and deletion of semaphores. - * - * ix_ossl_sem_init - * ix_ossl_sem_fini - * ix_ossl_sem_take - * ix_ossl_sem_give - * ix_ossl_sem_flush - * - * OSSL Mutex APIs: - * The OSSL wrapper functions that allow for initialization, - * posting, waiting and deletion of mutexes. - * - * ix_ossl_mutex_init - * ix_ossl_mutex_fini - * ix_ossl_mutex_lock - * ix_ossl_mutex_unlock - * - * OSSL Timer APIs: - * The timer APIs provide sleep and get time functions. - * - * ix_ossl_sleep - * ix_ossl_sleep_tick - * ix_ossl_time_get - * - * OSAPIs for Transactor/WorkBench: - * These OSAPI functions are used for transator OS calls. - * They are defined in osApi.h. - * - * Sem_Init - * Sem_Destroy - * Sem_Wait - * Sem_Wait - * Thread_Create - * Thread_Cancel - * Thread_SetPriority - * delayMs - * delayTick - * - * - * - ********************************************************************** - * - * - * = AUTHOR - * Intel Corporation - * - * = ACKNOWLEDGEMENTS - * - * - * = CREATION TIME - * 1/8/2002 1:53:42 PM - * - * = CHANGE HISTORY - * 02/22/2002 : Renamed osapi.h os_api.h - * Moved OS header file includes from OSSL.h to os_api.h - * Moved OS specific datatypes to os_api.h - * Modified data types, macros and functions as per - * 'C' coding guidelines. - * - * - * ============================================================================ - */ - -#ifndef _IX_OSSL_H -#ifndef __doxygen_hide -#define _IX_OSSL_H -#endif /* __doxygen_hide */ - -#include "IxOsalBackward.h" - -#endif /* _IX_OSSL_H */ - -/** - * @} defgroup IxOSSL - */ diff --git a/drivers/net/npe/include/ix_symbols.h b/drivers/net/npe/include/ix_symbols.h deleted file mode 100644 index 0006b227c6..0000000000 --- a/drivers/net/npe/include/ix_symbols.h +++ /dev/null @@ -1,82 +0,0 @@ -/** - * ============================================================================ - * = COPYRIGHT - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - * = PRODUCT - * Intel(r) IXP425 Software Release - * - * = FILENAME - * ix_symbols.h - * - * = DESCRIPTION - * This file declares all the global preprocessor symbols required by - * the IXA SDK Framework API. - * - * = AUTHOR - * Intel Corporation - * - * = CHANGE HISTORY - * 4/23/2002 10:41:13 AM - creation time - * ============================================================================ - */ - -#if !defined(__IX_SYMBOLS_H__) -#define __IX_SYMBOLS_H__ - - -#if defined(__cplusplus) -extern "C" -{ -#endif /* end defined(__cplusplus) */ - -/** - * The IX_EXPORT_FUNCTION symbol will be used for compilation on different platforms. - * We are planning to provide a simulation version of the library that should work - * with the Transactor rather than the hardware. This implementation will be done on - * WIN32 in the form of a DLL that will need to export functions and symbols. - */ -#if (_IX_OS_TYPE_ == _IX_OS_WIN32_) -# if defined(_IX_LIB_INTERFACE_IMPLEMENTATION_) -# define IX_EXPORT_FUNCTION __declspec( dllexport ) -# elif defined(_IX_LIB_INTERFACE_IMPORT_DLL_) -# define IX_EXPORT_FUNCTION __declspec( dllimport ) -# else -# define IX_EXPORT_FUNCTION extern -# endif -#elif (_IX_OS_TYPE_ == _IX_OS_WINCE_) -# define IX_EXPORT_FUNCTION __declspec(dllexport) -#else -# define IX_EXPORT_FUNCTION extern -#endif - - -/** - * This symbols should be defined when we want to build for a multithreaded environment - */ -#define _IX_MULTI_THREADED_ 1 - - -/** - * This symbol should be defined in the case we to buils for a multithreaded environment - * but we want that our modules to work as if they are used in a single threaded environment. - */ -/* #define _IX_RM_EXPLICIT_SINGLE_THREADED_ 1 */ - -#if defined(__cplusplus) -} -#endif /* end defined(__cplusplus) */ - -#endif /* end !defined(__IX_SYMBOLS_H__) */ diff --git a/drivers/net/npe/include/ix_types.h b/drivers/net/npe/include/ix_types.h deleted file mode 100644 index 6945506049..0000000000 --- a/drivers/net/npe/include/ix_types.h +++ /dev/null @@ -1,184 +0,0 @@ -/** - * ============================================================================ - * = COPYRIGHT - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - * = PRODUCT - * Intel(r) IXP425 Software Release - * - * = FILENAME - * ix_types.h - * - * = DESCRIPTION - * This file will define generic types that will guarantee the protability - * between different architectures and compilers. It should be used the entire - * IXA SDK Framework API. - * - * = AUTHOR - * Intel Corporation - * - * = CHANGE HISTORY - * 4/22/2002 4:44:17 PM - creation time - * ============================================================================ - */ - -#if !defined(__IX_TYPES_H__) -#define __IX_TYPES_H__ - - -#if defined(__cplusplus) -extern "C" -{ -#endif /* end defined(__cplusplus) */ - - -/** - * Define generic integral data types that will guarantee the size. - */ - -/** - * TYPENAME: ix_int8 - * - * DESCRIPTION: This type defines an 8 bit signed integer value. - * - */ -typedef signed char ix_int8; - - -/** - * TYPENAME: ix_uint8 - * - * DESCRIPTION: This type defines an 8 bit unsigned integer value. - * - */ -typedef unsigned char ix_uint8; - - -/** - * TYPENAME: ix_int16 - * - * DESCRIPTION: This type defines an 16 bit signed integer value. - * - */ -typedef signed short int ix_int16; - - -/** - * TYPENAME: ix_uint16 - * - * DESCRIPTION: This type defines an 16 bit unsigned integer value. - * - */ -typedef unsigned short int ix_uint16; - - -/** - * TYPENAME: ix_int32 - * - * DESCRIPTION: This type defines an 32 bit signed integer value. - * - */ -typedef signed int ix_int32; - - -/** - * TYPENAME: ix_uint32 - * - * DESCRIPTION: This type defines an 32 bit unsigned integer value. - * - */ -#ifndef __wince -typedef unsigned int ix_uint32; -#else -typedef unsigned long ix_uint32; -#endif - -/** - * TYPENAME: ix_int64 - * - * DESCRIPTION: This type defines an 64 bit signed integer value. - * - */ -#ifndef __wince -__extension__ typedef signed long long int ix_int64; -#endif - -/** - * TYPENAME: ix_uint64 - * - * DESCRIPTION: This type defines an 64 bit unsigned integer value. - * - */ -#ifndef __wince -__extension__ typedef unsigned long long int ix_uint64; -#endif - - -/** - * TYPENAME: ix_bit_mask8 - * - * DESCRIPTION: This is a generic type for a 8 bit mask. - */ -typedef ix_uint8 ix_bit_mask8; - - -/** - * TYPENAME: ix_bit_mask16 - * - * DESCRIPTION: This is a generic type for a 16 bit mask. - */ -typedef ix_uint16 ix_bit_mask16; - - -/** - * TYPENAME: ix_bit_mask32 - * - * DESCRIPTION: This is a generic type for a 32 bit mask. - */ -typedef ix_uint32 ix_bit_mask32; - - -/** - * TYPENAME: ix_bit_mask64 - * - * DESCRIPTION: This is a generic type for a 64 bit mask. - */ -#ifndef __wince -typedef ix_uint64 ix_bit_mask64; -#endif - - -/** - * TYPENAME: ix_handle - * - * DESCRIPTION: This type defines a generic handle. - * - */ -typedef ix_uint32 ix_handle; - - - -/** - * DESCRIPTION: This symbol defines a NULL handle - * - */ -#define IX_NULL_HANDLE ((ix_handle)0) - - -#if defined(__cplusplus) -} -#endif /* end defined(__cplusplus) */ - -#endif /* end !defined(__IX_TYPES_H__) */ diff --git a/drivers/net/npe/include/npe.h b/drivers/net/npe/include/npe.h deleted file mode 100644 index 1c6ae26ddc..0000000000 --- a/drivers/net/npe/include/npe.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * (C) Copyright 2005 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef NPE_H -#define NPE_H - -/* - * defines... - */ -#define CONFIG_SYS_NPE_NUMS 1 -#ifdef CONFIG_HAS_ETH1 -#undef CONFIG_SYS_NPE_NUMS -#define CONFIG_SYS_NPE_NUMS 2 -#endif - -#define NPE_NUM_PORTS 3 -#define ACTIVE_PORTS 1 - -#define NPE_PKT_SIZE 1600 - -#define CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS 64 -#define CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS 2 - -#define NPE_MBUF_POOL_SIZE \ - ((CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS + \ - CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS) * \ - sizeof(IX_OSAL_MBUF) * ACTIVE_PORTS) - -#define NPE_PKT_POOL_SIZE \ - ((CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS + \ - CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS) * \ - NPE_PKT_SIZE * ACTIVE_PORTS) - -#define NPE_MEM_POOL_SIZE (NPE_MBUF_POOL_SIZE + NPE_PKT_POOL_SIZE) - -#define PHY_AUTONEGOTIATE_TIMEOUT 4000 /* 4000 ms autonegotiate timeout */ - -/* - * structs... - */ -struct npe { - u8 active; /* NPE active */ - u8 eth_id; /* IX_ETH_PORT_1 or IX_ETH_PORT_2 */ - u8 phy_no; /* which PHY (0 - 31) */ - u8 mac_address[6]; - - IX_OSAL_MBUF *rxQHead; - IX_OSAL_MBUF *txQHead; - - u8 *tx_pkts; - u8 *rx_pkts; - IX_OSAL_MBUF *rx_mbufs; - IX_OSAL_MBUF *tx_mbufs; - - int print_speed; - - int rx_read; - int rx_write; - int rx_len[PKTBUFSRX]; -}; - -/* - * prototypes... - */ -extern int npe_miiphy_read (const char *devname, unsigned char addr, - unsigned char reg, unsigned short *value); -extern int npe_miiphy_write (const char *devname, unsigned char addr, - unsigned char reg, unsigned short value); - -#endif /* ifndef NPE_H */ diff --git a/drivers/net/npe/include/os_datatypes.h b/drivers/net/npe/include/os_datatypes.h deleted file mode 100644 index def891b862..0000000000 --- a/drivers/net/npe/include/os_datatypes.h +++ /dev/null @@ -1,58 +0,0 @@ -/** - * ============================================================================ - * = COPYRIGHT - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - * = PRODUCT - * Intel(r) IXP425 Software Release - * - * = LIBRARY - * OSSL - Operating System Services Library - * - * = MODULE - * OS Specific Data Types header file - * - * = FILENAME - * OSSL.h (Replaced by OSAL) - * - * = DESCRIPTION - * This file contains definitions and encapsulations for OS specific data types. These - * encapsulated data types are used by OSSL header files and OS API functions. - * - * - ********************************************************************** - * - * - * = AUTHOR - * Intel Corporation - * - * = AKNOWLEDGEMENTS - * - * - * = CREATION TIME - * 1/8/2002 1:53:42 PM - * - * = CHANGE HISTORY - - * ============================================================================ - */ - -#ifndef _OS_DATATYPES_H -#define _OS_DATATYPES_H - -#include "IxOsalBackward.h" - -#endif /* _OS_DATATYPES_H */ - diff --git a/drivers/net/npe/miiphy.c b/drivers/net/npe/miiphy.c deleted file mode 100644 index 002fb8113b..0000000000 --- a/drivers/net/npe/miiphy.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * SPDX-License-Identifier: GPL-2.0 IBM-pibs - */ -/*-----------------------------------------------------------------------------+ - | - | File Name: miiphy.c - | - | Function: This module has utilities for accessing the MII PHY through - | the EMAC3 macro. - | - | Author: Mark Wisner - | - | Change Activity- - | - | Date Description of Change BY - | --------- --------------------- --- - | 05-May-99 Created MKW - | 01-Jul-99 Changed clock setting of sta_reg from 66MHz to 50MHz to - | better match OPB speed. Also modified delay times. JWB - | 29-Jul-99 Added Full duplex support MKW - | 24-Aug-99 Removed printf from dp83843_duplex() JWB - | 19-Jul-00 Ported to esd cpci405 sr - | 23-Dec-03 Ported from miiphy.c to 440GX Travis Sawyer TBS - | - | - +-----------------------------------------------------------------------------*/ - -#include -#include -#include "IxOsal.h" -#include "IxEthAcc.h" -#include "IxEthAcc_p.h" -#include "IxEthAccMac_p.h" -#include "IxEthAccMii_p.h" - -/***********************************************************/ -/* Dump out to the screen PHY regs */ -/***********************************************************/ - -void miiphy_dump (char *devname, unsigned char addr) -{ - unsigned long i; - unsigned short data; - - - for (i = 0; i < 0x1A; i++) { - if (miiphy_read (devname, addr, i, &data)) { - printf ("read error for reg %lx\n", i); - return; - } - printf ("Phy reg %lx ==> %4x\n", i, data); - - /* jump to the next set of regs */ - if (i == 0x07) - i = 0x0f; - - } /* end for loop */ -} /* end dump */ - - -/***********************************************************/ -/* (Re)start autonegotiation */ -/***********************************************************/ -int phy_setup_aneg (char *devname, unsigned char addr) -{ - unsigned short ctl, adv; - - /* Setup standard advertise */ - miiphy_read (devname, addr, MII_ADVERTISE, &adv); - adv |= (LPA_LPACK | LPA_RFAULT | LPA_100BASE4 | - LPA_100FULL | LPA_100HALF | LPA_10FULL | - LPA_10HALF); - miiphy_write (devname, addr, MII_ADVERTISE, adv); - - /* Start/Restart aneg */ - miiphy_read (devname, addr, MII_BMCR, &ctl); - ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); - miiphy_write (devname, addr, MII_BMCR, ctl); - - return 0; -} - - -int npe_miiphy_read (const char *devname, unsigned char addr, - unsigned char reg, unsigned short *value) -{ - u16 val; - - ixEthAccMiiReadRtn(addr, reg, &val); - *value = val; - - return 0; -} /* phy_read */ - - -int npe_miiphy_write (const char *devname, unsigned char addr, - unsigned char reg, unsigned short value) -{ - ixEthAccMiiWriteRtn(addr, reg, value); - return 0; -} /* phy_write */ diff --git a/drivers/net/npe/npe.c b/drivers/net/npe/npe.c deleted file mode 100644 index 00b381ec4a..0000000000 --- a/drivers/net/npe/npe.c +++ /dev/null @@ -1,680 +0,0 @@ -/* - * (C) Copyright 2005-2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#if 0 -#define DEBUG /* define for debug output */ -#endif - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -static IxQMgrDispatcherFuncPtr qDispatcherFunc = NULL; -static int npe_exists[NPE_NUM_PORTS]; -static int npe_used[NPE_NUM_PORTS]; - -/* A little extra so we can align to cacheline. */ -static u8 npe_alloc_pool[NPE_MEM_POOL_SIZE + CONFIG_SYS_CACHELINE_SIZE - 1]; -static u8 *npe_alloc_end; -static u8 *npe_alloc_free; - -static void *npe_alloc(int size) -{ - static int count = 0; - void *p = NULL; - - size = (size + (CONFIG_SYS_CACHELINE_SIZE-1)) & ~(CONFIG_SYS_CACHELINE_SIZE-1); - count++; - - if ((npe_alloc_free + size) < npe_alloc_end) { - p = npe_alloc_free; - npe_alloc_free += size; - } else { - printf("npe_alloc: failed (count=%d, size=%d)!\n", count, size); - } - return p; -} - -/* Not interrupt safe! */ -static void mbuf_enqueue(IX_OSAL_MBUF **q, IX_OSAL_MBUF *new) -{ - IX_OSAL_MBUF *m = *q; - - IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(new) = NULL; - - if (m) { - while(IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m)) - m = IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m); - IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m) = new; - } else - *q = new; -} - -/* Not interrupt safe! */ -static IX_OSAL_MBUF *mbuf_dequeue(IX_OSAL_MBUF **q) -{ - IX_OSAL_MBUF *m = *q; - if (m) - *q = IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m); - return m; -} - -static void reset_tx_mbufs(struct npe* p_npe) -{ - IX_OSAL_MBUF *m; - int i; - - p_npe->txQHead = NULL; - - for (i = 0; i < CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS; i++) { - m = &p_npe->tx_mbufs[i]; - - memset(m, 0, sizeof(*m)); - - IX_OSAL_MBUF_MDATA(m) = (void *)&p_npe->tx_pkts[i * NPE_PKT_SIZE]; - IX_OSAL_MBUF_MLEN(m) = IX_OSAL_MBUF_PKT_LEN(m) = NPE_PKT_SIZE; - mbuf_enqueue(&p_npe->txQHead, m); - } -} - -static void reset_rx_mbufs(struct npe* p_npe) -{ - IX_OSAL_MBUF *m; - int i; - - p_npe->rxQHead = NULL; - - HAL_DCACHE_INVALIDATE(p_npe->rx_pkts, NPE_PKT_SIZE * - CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS); - - for (i = 0; i < CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS; i++) { - m = &p_npe->rx_mbufs[i]; - - memset(m, 0, sizeof(*m)); - - IX_OSAL_MBUF_MDATA(m) = (void *)&p_npe->rx_pkts[i * NPE_PKT_SIZE]; - IX_OSAL_MBUF_MLEN(m) = IX_OSAL_MBUF_PKT_LEN(m) = NPE_PKT_SIZE; - - if(ixEthAccPortRxFreeReplenish(p_npe->eth_id, m) != IX_SUCCESS) { - printf("ixEthAccPortRxFreeReplenish failed for port %d\n", p_npe->eth_id); - break; - } - } -} - -static void init_rx_mbufs(struct npe* p_npe) -{ - p_npe->rxQHead = NULL; - - p_npe->rx_pkts = npe_alloc(NPE_PKT_SIZE * - CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS); - if (p_npe->rx_pkts == NULL) { - printf("alloc of packets failed.\n"); - return; - } - - p_npe->rx_mbufs = (IX_OSAL_MBUF *) - npe_alloc(sizeof(IX_OSAL_MBUF) * - CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS); - if (p_npe->rx_mbufs == NULL) { - printf("alloc of mbufs failed.\n"); - return; - } - - reset_rx_mbufs(p_npe); -} - -static void init_tx_mbufs(struct npe* p_npe) -{ - p_npe->tx_pkts = npe_alloc(NPE_PKT_SIZE * - CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS); - if (p_npe->tx_pkts == NULL) { - printf("alloc of packets failed.\n"); - return; - } - - p_npe->tx_mbufs = (IX_OSAL_MBUF *) - npe_alloc(sizeof(IX_OSAL_MBUF) * - CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS); - if (p_npe->tx_mbufs == NULL) { - printf("alloc of mbufs failed.\n"); - return; - } - - reset_tx_mbufs(p_npe); -} - -/* Convert IX_ETH_PORT_n to IX_NPEMH_NPEID_NPEx */ -static int __eth_to_npe(int eth_id) -{ - switch(eth_id) { - case IX_ETH_PORT_1: - return IX_NPEMH_NPEID_NPEB; - - case IX_ETH_PORT_2: - return IX_NPEMH_NPEID_NPEC; - - case IX_ETH_PORT_3: - return IX_NPEMH_NPEID_NPEA; - } - return 0; -} - -/* Poll the CSR machinery. */ -static void npe_poll(int eth_id) -{ - if (qDispatcherFunc != NULL) { - ixNpeMhMessagesReceive(__eth_to_npe(eth_id)); - (*qDispatcherFunc)(IX_QMGR_QUELOW_GROUP); - } -} - -/* ethAcc RX callback */ -static void npe_rx_callback(u32 cbTag, IX_OSAL_MBUF *m, IxEthAccPortId portid) -{ - struct npe* p_npe = (struct npe *)cbTag; - - if (IX_OSAL_MBUF_MLEN(m) > 0) { - mbuf_enqueue(&p_npe->rxQHead, m); - - if (p_npe->rx_write == ((p_npe->rx_read-1) & (PKTBUFSRX-1))) { - debug("Rx overflow: rx_write=%d rx_read=%d\n", - p_npe->rx_write, p_npe->rx_read); - } else { - debug("Received message #%d (len=%d)\n", p_npe->rx_write, - IX_OSAL_MBUF_MLEN(m)); - memcpy((void *)NetRxPackets[p_npe->rx_write], IX_OSAL_MBUF_MDATA(m), - IX_OSAL_MBUF_MLEN(m)); - p_npe->rx_len[p_npe->rx_write] = IX_OSAL_MBUF_MLEN(m); - p_npe->rx_write++; - if (p_npe->rx_write == PKTBUFSRX) - p_npe->rx_write = 0; - -#ifdef CONFIG_PRINT_RX_FRAMES - { - u8 *ptr = IX_OSAL_MBUF_MDATA(m); - int i; - - for (i=0; i<60; i++) { - debug("%02x ", *ptr++); - } - debug("\n"); - } -#endif - } - - m = mbuf_dequeue(&p_npe->rxQHead); - } else { - debug("Received frame with length 0!!!\n"); - m = mbuf_dequeue(&p_npe->rxQHead); - } - - /* Now return mbuf to NPE */ - IX_OSAL_MBUF_MLEN(m) = IX_OSAL_MBUF_PKT_LEN(m) = NPE_PKT_SIZE; - IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(m) = NULL; - IX_OSAL_MBUF_FLAGS(m) = 0; - - if(ixEthAccPortRxFreeReplenish(p_npe->eth_id, m) != IX_SUCCESS) { - debug("npe_rx_callback: Error returning mbuf.\n"); - } -} - -/* ethAcc TX callback */ -static void npe_tx_callback(u32 cbTag, IX_OSAL_MBUF *m) -{ - struct npe* p_npe = (struct npe *)cbTag; - - debug("%s\n", __FUNCTION__); - - IX_OSAL_MBUF_MLEN(m) = IX_OSAL_MBUF_PKT_LEN(m) = NPE_PKT_SIZE; - IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(m) = NULL; - IX_OSAL_MBUF_FLAGS(m) = 0; - - mbuf_enqueue(&p_npe->txQHead, m); -} - - -static int npe_set_mac_address(struct eth_device *dev) -{ - struct npe *p_npe = (struct npe *)dev->priv; - IxEthAccMacAddr npeMac; - - debug("%s\n", __FUNCTION__); - - /* Set MAC address */ - memcpy(npeMac.macAddress, dev->enetaddr, 6); - - if (ixEthAccPortUnicastMacAddressSet(p_npe->eth_id, &npeMac) != IX_ETH_ACC_SUCCESS) { - printf("Error setting unicast address! %02x:%02x:%02x:%02x:%02x:%02x\n", - npeMac.macAddress[0], npeMac.macAddress[1], - npeMac.macAddress[2], npeMac.macAddress[3], - npeMac.macAddress[4], npeMac.macAddress[5]); - return 0; - } - - return 1; -} - -/* Boot-time CSR library initialization. */ -static int npe_csr_load(void) -{ - int i; - - if (ixQMgrInit() != IX_SUCCESS) { - debug("Error initialising queue manager!\n"); - return 0; - } - - ixQMgrDispatcherLoopGet(&qDispatcherFunc); - - if(ixNpeMhInitialize(IX_NPEMH_NPEINTERRUPTS_YES) != IX_SUCCESS) { - printf("Error initialising NPE Message handler!\n"); - return 0; - } - - if (npe_used[IX_ETH_PORT_1] && npe_exists[IX_ETH_PORT_1] && - ixNpeDlNpeInitAndStart(IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS) - != IX_SUCCESS) { - printf("Error downloading firmware to NPE-B!\n"); - return 0; - } - - if (npe_used[IX_ETH_PORT_2] && npe_exists[IX_ETH_PORT_2] && - ixNpeDlNpeInitAndStart(IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS) - != IX_SUCCESS) { - printf("Error downloading firmware to NPE-C!\n"); - return 0; - } - - /* don't need this for U-Boot */ - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, false); - - if (ixEthAccInit() != IX_ETH_ACC_SUCCESS) { - printf("Error initialising Ethernet access driver!\n"); - return 0; - } - - for (i = 0; i < IX_ETH_ACC_NUMBER_OF_PORTS; i++) { - if (!npe_used[i] || !npe_exists[i]) - continue; - if (ixEthAccPortInit(i) != IX_ETH_ACC_SUCCESS) { - printf("Error initialising Ethernet port%d!\n", i); - } - if (ixEthAccTxSchedulingDisciplineSet(i, FIFO_NO_PRIORITY) != IX_ETH_ACC_SUCCESS) { - printf("Error setting scheduling discipline for port %d.\n", i); - } - if (ixEthAccPortRxFrameAppendFCSDisable(i) != IX_ETH_ACC_SUCCESS) { - printf("Error disabling RX FCS for port %d.\n", i); - } - if (ixEthAccPortTxFrameAppendFCSEnable(i) != IX_ETH_ACC_SUCCESS) { - printf("Error enabling TX FCS for port %d.\n", i); - } - } - - return 1; -} - -static int npe_init(struct eth_device *dev, bd_t * bis) -{ - struct npe *p_npe = (struct npe *)dev->priv; - int i; - u16 reg_short; - int speed; - int duplex; - - debug("%s: 1\n", __FUNCTION__); - -#ifdef CONFIG_MII_NPE0_FIXEDLINK - if (0 == p_npe->eth_id) { - speed = CONFIG_MII_NPE0_SPEED; - duplex = CONFIG_MII_NPE0_FULLDUPLEX ? FULL : HALF; - } else -#endif -#ifdef CONFIG_MII_NPE1_FIXEDLINK - if (1 == p_npe->eth_id) { - speed = CONFIG_MII_NPE1_SPEED; - duplex = CONFIG_MII_NPE1_FULLDUPLEX ? FULL : HALF; - } else -#endif - { - miiphy_read(dev->name, p_npe->phy_no, MII_BMSR, ®_short); - - /* - * Wait if PHY is capable of autonegotiation and - * autonegotiation is not complete - */ - if ((reg_short & BMSR_ANEGCAPABLE) && - !(reg_short & BMSR_ANEGCOMPLETE)) { - puts("Waiting for PHY auto negotiation to complete"); - i = 0; - while (!(reg_short & BMSR_ANEGCOMPLETE)) { - /* - * Timeout reached ? - */ - if (i > PHY_AUTONEGOTIATE_TIMEOUT) { - puts(" TIMEOUT !\n"); - break; - } - - if ((i++ % 1000) == 0) { - putc('.'); - miiphy_read(dev->name, p_npe->phy_no, - MII_BMSR, ®_short); - } - udelay(1000); /* 1 ms */ - } - puts(" done\n"); - /* another 500 ms (results in faster booting) */ - udelay(500000); - } - speed = miiphy_speed(dev->name, p_npe->phy_no); - duplex = miiphy_duplex(dev->name, p_npe->phy_no); - } - - if (p_npe->print_speed) { - p_npe->print_speed = 0; - printf ("ENET Speed is %d Mbps - %s duplex connection\n", - (int) speed, (duplex == HALF) ? "HALF" : "FULL"); - } - - npe_alloc_end = npe_alloc_pool + sizeof(npe_alloc_pool); - npe_alloc_free = (u8 *)(((unsigned)npe_alloc_pool + - CONFIG_SYS_CACHELINE_SIZE - 1) & ~(CONFIG_SYS_CACHELINE_SIZE - 1)); - - /* initialize mbuf pool */ - init_rx_mbufs(p_npe); - init_tx_mbufs(p_npe); - - if (ixEthAccPortRxCallbackRegister(p_npe->eth_id, npe_rx_callback, - (u32)p_npe) != IX_ETH_ACC_SUCCESS) { - printf("can't register RX callback!\n"); - return -1; - } - - if (ixEthAccPortTxDoneCallbackRegister(p_npe->eth_id, npe_tx_callback, - (u32)p_npe) != IX_ETH_ACC_SUCCESS) { - printf("can't register TX callback!\n"); - return -1; - } - - npe_set_mac_address(dev); - - if (ixEthAccPortEnable(p_npe->eth_id) != IX_ETH_ACC_SUCCESS) { - printf("can't enable port!\n"); - return -1; - } - - p_npe->active = 1; - - return 0; -} - -#if 0 /* test-only: probably have to deal with it when booting linux (for a clean state) */ -/* Uninitialize CSR library. */ -static void npe_csr_unload(void) -{ - ixEthAccUnload(); - ixEthDBUnload(); - ixNpeMhUnload(); - ixQMgrUnload(); -} - -/* callback which is used by ethAcc to recover RX buffers when stopping */ -static void npe_rx_stop_callback(u32 cbTag, IX_OSAL_MBUF *m, IxEthAccPortId portid) -{ - debug("%s\n", __FUNCTION__); -} - -/* callback which is used by ethAcc to recover TX buffers when stopping */ -static void npe_tx_stop_callback(u32 cbTag, IX_OSAL_MBUF *m) -{ - debug("%s\n", __FUNCTION__); -} -#endif - -static void npe_halt(struct eth_device *dev) -{ - struct npe *p_npe = (struct npe *)dev->priv; - int i; - - debug("%s\n", __FUNCTION__); - - /* Delay to give time for recovery of mbufs */ - for (i = 0; i < 100; i++) { - npe_poll(p_npe->eth_id); - udelay(100); - } - -#if 0 /* test-only: probably have to deal with it when booting linux (for a clean state) */ - if (ixEthAccPortRxCallbackRegister(p_npe->eth_id, npe_rx_stop_callback, - (u32)p_npe) != IX_ETH_ACC_SUCCESS) { - debug("Error registering rx callback!\n"); - } - - if (ixEthAccPortTxDoneCallbackRegister(p_npe->eth_id, npe_tx_stop_callback, - (u32)p_npe) != IX_ETH_ACC_SUCCESS) { - debug("Error registering tx callback!\n"); - } - - if (ixEthAccPortDisable(p_npe->eth_id) != IX_ETH_ACC_SUCCESS) { - debug("npe_stop: Error disabling NPEB!\n"); - } - - /* Delay to give time for recovery of mbufs */ - for (i = 0; i < 100; i++) { - npe_poll(p_npe->eth_id); - udelay(10000); - } - - /* - * For U-Boot only, we are probably launching Linux or other OS that - * needs a clean slate for its NPE library. - */ -#if 0 /* test-only */ - for (i = 0; i < IX_ETH_ACC_NUMBER_OF_PORTS; i++) { - if (npe_used[i] && npe_exists[i]) - if (ixNpeDlNpeStopAndReset(__eth_to_npe(i)) != IX_SUCCESS) - printf("Failed to stop and reset NPE B.\n"); - } -#endif - -#endif - p_npe->active = 0; -} - - -static int npe_send(struct eth_device *dev, void *packet, int len) -{ - struct npe *p_npe = (struct npe *)dev->priv; - u8 *dest; - int err; - IX_OSAL_MBUF *m; - - debug("%s\n", __FUNCTION__); - m = mbuf_dequeue(&p_npe->txQHead); - dest = IX_OSAL_MBUF_MDATA(m); - IX_OSAL_MBUF_PKT_LEN(m) = IX_OSAL_MBUF_MLEN(m) = len; - IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m) = NULL; - - memcpy(dest, (char *)packet, len); - - if ((err = ixEthAccPortTxFrameSubmit(p_npe->eth_id, m, IX_ETH_ACC_TX_DEFAULT_PRIORITY)) - != IX_ETH_ACC_SUCCESS) { - printf("npe_send: Can't submit frame. err[%d]\n", err); - mbuf_enqueue(&p_npe->txQHead, m); - return 0; - } - -#ifdef DEBUG_PRINT_TX_FRAMES - { - u8 *ptr = IX_OSAL_MBUF_MDATA(m); - int i; - - for (i=0; ieth_id); - - return len; -} - -static int npe_rx(struct eth_device *dev) -{ - struct npe *p_npe = (struct npe *)dev->priv; - - debug("%s\n", __FUNCTION__); - npe_poll(p_npe->eth_id); - - debug("%s: rx_write=%d rx_read=%d\n", __FUNCTION__, p_npe->rx_write, p_npe->rx_read); - while (p_npe->rx_write != p_npe->rx_read) { - debug("Reading message #%d\n", p_npe->rx_read); - NetReceive(NetRxPackets[p_npe->rx_read], p_npe->rx_len[p_npe->rx_read]); - p_npe->rx_read++; - if (p_npe->rx_read == PKTBUFSRX) - p_npe->rx_read = 0; - } - - return 0; -} - -int npe_initialize(bd_t * bis) -{ - static int virgin = 0; - struct eth_device *dev; - int eth_num = 0; - struct npe *p_npe = NULL; - uchar enetaddr[6]; - - for (eth_num = 0; eth_num < CONFIG_SYS_NPE_NUMS; eth_num++) { - - /* See if we can actually bring up the interface, otherwise, skip it */ -#ifdef CONFIG_HAS_ETH1 - if (eth_num == 1) { - if (!eth_getenv_enetaddr("eth1addr", enetaddr)) - continue; - } else -#endif - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) - continue; - - /* Allocate device structure */ - dev = (struct eth_device *)malloc(sizeof(*dev)); - if (dev == NULL) { - printf ("%s: Cannot allocate eth_device %d\n", __FUNCTION__, eth_num); - return -1; - } - memset(dev, 0, sizeof(*dev)); - - /* Allocate our private use data */ - p_npe = (struct npe *)malloc(sizeof(struct npe)); - if (p_npe == NULL) { - printf("%s: Cannot allocate private hw data for eth_device %d", - __FUNCTION__, eth_num); - free(dev); - return -1; - } - memset(p_npe, 0, sizeof(struct npe)); - - p_npe->eth_id = eth_num; - memcpy(dev->enetaddr, enetaddr, 6); -#ifdef CONFIG_HAS_ETH1 - if (eth_num == 1) - p_npe->phy_no = CONFIG_PHY1_ADDR; - else -#endif - p_npe->phy_no = CONFIG_PHY_ADDR; - - sprintf(dev->name, "NPE%d", eth_num); - dev->priv = (void *)p_npe; - dev->init = npe_init; - dev->halt = npe_halt; - dev->send = npe_send; - dev->recv = npe_rx; - - p_npe->print_speed = 1; - - if (0 == virgin) { - virgin = 1; - - if (ixFeatureCtrlDeviceRead() == IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X) { - switch (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK) { - case IX_FEATURE_CTRL_SILICON_TYPE_B0: - default: /* newer than B0 */ - /* - * If it is B0 or newer Silicon, we - * only enable port when its - * corresponding Eth Coprocessor is - * available. - */ - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) == - IX_FEATURE_CTRL_COMPONENT_ENABLED) - npe_exists[IX_ETH_PORT_1] = true; - - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) == - IX_FEATURE_CTRL_COMPONENT_ENABLED) - npe_exists[IX_ETH_PORT_2] = true; - break; - case IX_FEATURE_CTRL_SILICON_TYPE_A0: - /* - * If it is A0 Silicon, we enable both as both Eth Coprocessors - * are available. - */ - npe_exists[IX_ETH_PORT_1] = true; - npe_exists[IX_ETH_PORT_2] = true; - break; - } - } else if (ixFeatureCtrlDeviceRead() == IX_FEATURE_CTRL_DEVICE_TYPE_IXP46X) { - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) == - IX_FEATURE_CTRL_COMPONENT_ENABLED) - npe_exists[IX_ETH_PORT_1] = true; - - if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) == - IX_FEATURE_CTRL_COMPONENT_ENABLED) - npe_exists[IX_ETH_PORT_2] = true; - } - - npe_used[IX_ETH_PORT_1] = 1; - npe_used[IX_ETH_PORT_2] = 1; - - npe_alloc_end = npe_alloc_pool + sizeof(npe_alloc_pool); - npe_alloc_free = (u8 *)(((unsigned)npe_alloc_pool + - CONFIG_SYS_CACHELINE_SIZE - 1) - & ~(CONFIG_SYS_CACHELINE_SIZE - 1)); - - if (!npe_csr_load()) - return 0; - } - - eth_register(dev); - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - miiphy_register(dev->name, npe_miiphy_read, npe_miiphy_write); -#endif - - } /* end for each supported device */ - - return 1; -} -- 2.39.5