From 0c2385c3bb51f5d3911fce1ec4720db86b534c2b Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Mon, 24 Nov 2008 15:11:09 +0100 Subject: [PATCH] ppc4xx: Use correct io accessors for PCI405 Signed-off-by: Matthias Fuchs Signed-off-by: Stefan Roese --- board/esd/pci405/pci405.c | 51 ++++++++++++--------------------------- 1 file changed, 16 insertions(+), 35 deletions(-) diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c index 9112788981..42774ad209 100644 --- a/board/esd/pci405/pci405.c +++ b/board/esd/pci405/pci405.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "pci405.h" @@ -34,7 +35,7 @@ DECLARE_GLOBAL_DATA_PTR; /* Prototypes */ int gunzip(void *, int, unsigned char *, unsigned long *); -int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);/*cmd_boot.c*/ +int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); unsigned long fpga_done_state(void); unsigned long fpga_init_state(void); @@ -57,11 +58,11 @@ const unsigned char fpgadata[] = */ #include "../common/fpga.c" -#define FPGA_DONE_STATE_V11 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_DONE) -#define FPGA_DONE_STATE_V12 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_DONE_V12) +#define FPGA_DONE_STATE_V11 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_DONE) +#define FPGA_DONE_STATE_V12 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_DONE_V12) -#define FPGA_INIT_STATE_V11 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_INIT) -#define FPGA_INIT_STATE_V12 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_INIT_V12) +#define FPGA_INIT_STATE_V11 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_INIT) +#define FPGA_INIT_STATE_V12 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_INIT_V12) int board_revision(void) @@ -78,10 +79,10 @@ int board_revision(void) */ cntrl0Reg = mfdcr(cntrl0); mtdcr(cntrl0, cntrl0Reg | 0x03000000); - out32(GPIO0_ODR, in32(GPIO0_ODR) & ~0x00100200); - out32(GPIO0_TCR, in32(GPIO0_TCR) & ~0x00100200); + out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00100200); + out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00100200); udelay(1000); /* wait some time before reading input */ - value = in32(GPIO0_IR) & 0x00100200; /* get config bits */ + value = in_be32((void*)GPIO0_IR) & 0x00100200; /* get config bits */ /* * Restore GPIO settings @@ -137,10 +138,10 @@ int board_early_init_f (void) /* * First pull fpga-prg pin low, to disable fpga logic (on version 1.2 board) */ - out32(GPIO0_ODR, 0x00000000); /* no open drain pins */ - out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG); /* setup for output */ - out32(GPIO0_OR, CONFIG_SYS_FPGA_PRG); /* set output pins to high */ - out32(GPIO0_OR, 0); /* pull prg low */ + out_be32((void*)GPIO0_ODR, 0x00000000); /* no open drain pins */ + out_be32((void*)GPIO0_TCR, CONFIG_SYS_FPGA_PRG); /* setup for output */ + out_be32((void*)GPIO0_OR, CONFIG_SYS_FPGA_PRG); /* set output pins to high */ + out_be32((void*)GPIO0_OR, 0); /* pull prg low */ /* * IRQ 0-15 405GP internally generated; active high; level sensitive @@ -181,15 +182,6 @@ int board_early_init_f (void) return 0; } - -/* ------------------------------------------------------------------------- */ - -int misc_init_f (void) -{ - return 0; /* dummy implementation */ -} - - int misc_init_r (void) { unsigned char *dst; @@ -284,13 +276,11 @@ int misc_init_r (void) *magic = 0; /* clear pci reconfig magic again */ } -#if 1 /* test-only */ /* * Decrease PLB latency timeout and reduce priority of the PCI bridge master */ #define PCI0_BRDGOPT1 0x4a pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f20); -/* pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f60); */ #define plb0_acr 0x87 /* @@ -298,14 +288,6 @@ int misc_init_r (void) */ mtdcr(plb0_acr, 0x98000000); -#if 0 /* test-only */ - printf("CCR0=%08x\n", mfspr(ccr0)); /* test-only */ -/* mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00100000); */ - mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00000000); -#endif -/* printf("CCR0=%08x\n", mfspr(ccr0)); */ /* test-only */ -#endif - free(dst); return (0); } @@ -314,7 +296,6 @@ int misc_init_r (void) /* * Check Board Identity: */ - int checkboard (void) { char str[64]; @@ -340,10 +321,10 @@ int checkboard (void) */ cntrl0Reg = mfdcr(cntrl0); mtdcr(cntrl0, cntrl0Reg & ~0x08000000); - out32(GPIO0_ODR, in32(GPIO0_ODR) & ~0x40000000); - out32(GPIO0_TCR, in32(GPIO0_TCR) & ~0x40000000); + out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x40000000); + out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x40000000); udelay(1000); /* wait some time before reading input */ - value = in32(GPIO0_IR) & 0x40000000; /* get config bits */ + value = in_be32((void*)GPIO0_IR) & 0x40000000; /* get config bits */ if (value) { puts(", 33 MHz PCI"); } else { -- 2.39.5