From 0f8bc532404d09ed173d196a89a727f38f1749a6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 11 Jan 2015 20:34:47 +0100 Subject: [PATCH] musb-new: Add register defines for different reg layout on sunxi The sunxi SoCs also have a musb controller, but with a different register layout. Signed-off-by: Hans de Goede --- drivers/usb/musb-new/musb_regs.h | 92 ++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+) diff --git a/drivers/usb/musb-new/musb_regs.h b/drivers/usb/musb-new/musb_regs.h index 03f2655af2..27e4ed4ec6 100644 --- a/drivers/usb/musb-new/musb_regs.h +++ b/drivers/usb/musb-new/musb_regs.h @@ -216,6 +216,9 @@ #ifndef CONFIG_BLACKFIN +/* SUNXI has different reg addresses, but identical r/w functions */ +#ifndef CONFIG_ARCH_SUNXI + /* * Common USB registers */ @@ -318,6 +321,85 @@ #define MUSB_BUSCTL_OFFSET(_epnum, _offset) \ (0x80 + (8*(_epnum)) + (_offset)) +#else /* CONFIG_ARCH_SUNXI */ + +/* + * Common USB registers + */ + +#define MUSB_FADDR 0x0098 +#define MUSB_POWER 0x0040 + +#define MUSB_INTRTX 0x0044 +#define MUSB_INTRRX 0x0046 +#define MUSB_INTRTXE 0x0048 +#define MUSB_INTRRXE 0x004A +#define MUSB_INTRUSB 0x004C +#define MUSB_INTRUSBE 0x0050 +#define MUSB_FRAME 0x0054 +#define MUSB_INDEX 0x0042 +#define MUSB_TESTMODE 0x007C + +/* Get offset for a given FIFO from musb->mregs */ +#define MUSB_FIFO_OFFSET(epnum) (0x00 + ((epnum) * 4)) + +/* + * Additional Control Registers + */ + +#define MUSB_DEVCTL 0x0041 + +/* These are always controlled through the INDEX register */ +#define MUSB_TXFIFOSZ 0x0090 +#define MUSB_RXFIFOSZ 0x0094 +#define MUSB_TXFIFOADD 0x0092 +#define MUSB_RXFIFOADD 0x0096 + +#define MUSB_EPINFO 0x0078 +#define MUSB_RAMINFO 0x0079 +#define MUSB_LINKINFO 0x007A +#define MUSB_VPLEN 0x007B +#define MUSB_HS_EOF1 0x007C +#define MUSB_FS_EOF1 0x007D +#define MUSB_LS_EOF1 0x007E + +/* Offsets to endpoint registers */ +#define MUSB_TXMAXP 0x0080 +#define MUSB_TXCSR 0x0082 +#define MUSB_CSR0 0x0082 +#define MUSB_RXMAXP 0x0084 +#define MUSB_RXCSR 0x0086 +#define MUSB_RXCOUNT 0x0088 +#define MUSB_COUNT0 0x0088 +#define MUSB_TXTYPE 0x008C +#define MUSB_TYPE0 0x008C +#define MUSB_TXINTERVAL 0x008D +#define MUSB_NAKLIMIT0 0x008D +#define MUSB_RXTYPE 0x008E +#define MUSB_RXINTERVAL 0x008F + +#define MUSB_CONFIGDATA 0x00b0 /* musb_read_configdata adds 0x10 ! */ +#define MUSB_FIFOSIZE 0x0090 + +/* Offsets to endpoint registers in indexed model (using INDEX register) */ +#define MUSB_INDEXED_OFFSET(_epnum, _offset) (_offset) + +#define MUSB_TXCSR_MODE 0x2000 + +/* "bus control"/target registers, for host side multipoint (external hubs) */ +#define MUSB_TXFUNCADDR 0x0098 +#define MUSB_TXHUBADDR 0x009A +#define MUSB_TXHUBPORT 0x009B + +#define MUSB_RXFUNCADDR 0x009C +#define MUSB_RXHUBADDR 0x009E +#define MUSB_RXHUBPORT 0x009F + +/* Endpoint is selected with MUSB_INDEX. */ +#define MUSB_BUSCTL_OFFSET(_epnum, _offset) (_offset) + +#endif /* CONFIG_ARCH_SUNXI */ + static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size) { musb_writeb(mbase, MUSB_TXFIFOSZ, c_size); @@ -340,7 +422,9 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off) static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val) { +#ifndef CONFIG_ARCH_SUNXI /* No ulpi on sunxi */ musb_writeb(mbase, MUSB_ULPI_BUSCONTROL, val); +#endif } static inline u8 musb_read_txfifosz(void __iomem *mbase) @@ -365,7 +449,11 @@ static inline u16 musb_read_rxfifoadd(void __iomem *mbase) static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase) { +#ifdef CONFIG_ARCH_SUNXI /* No ulpi on sunxi */ + return 0; +#else return musb_readb(mbase, MUSB_ULPI_BUSCONTROL); +#endif } static inline u8 musb_read_configdata(void __iomem *mbase) @@ -376,7 +464,11 @@ static inline u8 musb_read_configdata(void __iomem *mbase) static inline u16 musb_read_hwvers(void __iomem *mbase) { +#ifdef CONFIG_ARCH_SUNXI + return 0; /* Unknown version */ +#else return musb_readw(mbase, MUSB_HWVERS); +#endif } static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase) -- 2.39.5