From 1123d4122da5522f52c801f8507b82992af5a19f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 21:54:19 +0200 Subject: [PATCH] PXA: xaeniax: Fix for reloc Signed-off-by: Marek Vasut --- board/xaeniax/Makefile | 10 +- board/xaeniax/config.mk | 2 - board/xaeniax/lowlevel_init.S | 424 ---------------------------------- board/xaeniax/xaeniax.c | 22 +- include/configs/xaeniax.h | 9 +- 5 files changed, 22 insertions(+), 445 deletions(-) delete mode 100644 board/xaeniax/config.mk delete mode 100644 board/xaeniax/lowlevel_init.S diff --git a/board/xaeniax/Makefile b/board/xaeniax/Makefile index 7dd2ea04a6..554915a6f9 100644 --- a/board/xaeniax/Makefile +++ b/board/xaeniax/Makefile @@ -26,17 +26,15 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := xaeniax.o flash.o -SOBJS := lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/xaeniax/config.mk b/board/xaeniax/config.mk deleted file mode 100644 index c63975279b..0000000000 --- a/board/xaeniax/config.mk +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0xa3FB0000 -#CONFIG_SYS_TEXT_BASE = 0 diff --git a/board/xaeniax/lowlevel_init.S b/board/xaeniax/lowlevel_init.S deleted file mode 100644 index 57e1620050..0000000000 --- a/board/xaeniax/lowlevel_init.S +++ /dev/null @@ -1,424 +0,0 @@ - /* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/lowlevel_init.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - - /* Set up GPIO pins first ----------------------------------------- */ - - ldr r0,=GPSR0 - ldr r1,=CONFIG_SYS_GPSR0_VAL - str r1,[r0] - - ldr r0,=GPSR1 - ldr r1,=CONFIG_SYS_GPSR1_VAL - str r1,[r0] - - ldr r0,=GPSR2 - ldr r1,=CONFIG_SYS_GPSR2_VAL - str r1,[r0] - - ldr r0,=GPCR0 - ldr r1,=CONFIG_SYS_GPCR0_VAL - str r1,[r0] - - ldr r0,=GPCR1 - ldr r1,=CONFIG_SYS_GPCR1_VAL - str r1,[r0] - - ldr r0,=GPCR2 - ldr r1,=CONFIG_SYS_GPCR2_VAL - str r1,[r0] - - ldr r0,=GPDR0 - ldr r1,=CONFIG_SYS_GPDR0_VAL - str r1,[r0] - - ldr r0,=GPDR1 - ldr r1,=CONFIG_SYS_GPDR1_VAL - str r1,[r0] - - ldr r0,=GPDR2 - ldr r1,=CONFIG_SYS_GPDR2_VAL - str r1,[r0] - - ldr r0,=GAFR0_L - ldr r1,=CONFIG_SYS_GAFR0_L_VAL - str r1,[r0] - - ldr r0,=GAFR0_U - ldr r1,=CONFIG_SYS_GAFR0_U_VAL - str r1,[r0] - - ldr r0,=GAFR1_L - ldr r1,=CONFIG_SYS_GAFR1_L_VAL - str r1,[r0] - - ldr r0,=GAFR1_U - ldr r1,=CONFIG_SYS_GAFR1_U_VAL - str r1,[r0] - - ldr r0,=GAFR2_L - ldr r1,=CONFIG_SYS_GAFR2_L_VAL - str r1,[r0] - - ldr r0,=GAFR2_U - ldr r1,=CONFIG_SYS_GAFR2_U_VAL - str r1,[r0] - - ldr r0,=PSSR /* enable GPIO pins */ - ldr r1,=CONFIG_SYS_PSSR_VAL - str r1,[r0] - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1,=MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2,=CONFIG_SYS_MSC0_VAL - str r2,[r1, #MSC0_OFFSET] - ldr r2,[r1, #MSC0_OFFSET] /* read back to ensure data latches */ - - /* MSC1: nCS(2,3) */ - ldr r2,=CONFIG_SYS_MSC1_VAL - str r2,[r1, #MSC1_OFFSET] - ldr r2,[r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2,=CONFIG_SYS_MSC2_VAL - str r2,[r1, #MSC2_OFFSET] - ldr r2,[r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2,=CONFIG_SYS_MECR_VAL - str r2,[r1, #MECR_OFFSET] - ldr r2,[r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2,=CONFIG_SYS_MCMEM0_VAL - str r2,[r1, #MCMEM0_OFFSET] - ldr r2,[r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2,=CONFIG_SYS_MCMEM1_VAL - str r2,[r1, #MCMEM1_OFFSET] - ldr r2,[r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2,=CONFIG_SYS_MCATT0_VAL - str r2,[r1, #MCATT0_OFFSET] - ldr r2,[r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2,=CONFIG_SYS_MCATT1_VAL - str r2,[r1, #MCATT1_OFFSET] - ldr r2,[r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2,=CONFIG_SYS_MCIO0_VAL - str r2,[r1, #MCIO0_OFFSET] - ldr r2,[r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2,=CONFIG_SYS_MCIO1_VAL - str r2,[r1, #MCIO1_OFFSET] - ldr r2,[r1, #MCIO1_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - @ get the mdrefr settings - ldr r4,=CONFIG_SYS_MDREFR_VAL - - @ write back mdrefr - str r4,[r1, #MDREFR_OFFSET] - ldr r4,[r1, #MDREFR_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - /* FIXME: we use async mode for now */ - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - @ set K1RUN for bank 0 - @ - orr r4, r4, #MDREFR_K1RUN - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #MDREFR_SLFRSH - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ if E0PIN is also used: #(MDREFR_E1PIN|MDREFR_E0PIN) - orr r4, r4, #(MDREFR_E1PIN) - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop - - /* Step 4d: */ - /* fetch platform value of mdcnfg */ - @ - ldr r2, =CONFIG_SYS_MDCNFG_VAL - - @ disable all sdram banks - @ - bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) - bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) - - @ program banks 0/1 for bus width - @ - bic r2, r2, #MDCNFG_DWID0 @0=32-bit - - @ write initial value of mdcnfg, w/o enabling sdram banks - @ - str r2, [r1, #MDCNFG_OFFSET] - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - ldr r3, =CONFIG_SYS_DRAM_BASE - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* get memory controller base address */ - ldr r1, =MEMC_BASE - - @fetch current mdcnfg value - @ - ldr r3, [r1, #MDCNFG_OFFSET] - - @enable sdram bank 0 if installed (must do for any populated bank) - @ - orr r3, r3, #MDCNFG_DE0 - - @write back mdcnfg, enabling the sdram bank(s) - @ - str r3, [r1, #MDCNFG_OFFSET] - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CONFIG_SYS_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - - /* We are finished with Intel's memory controller initialisation */ - - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r1, =CONFIG_SYS_ICMR_VAL /* mask all interrupts at the controller */ - ldr r2, =ICMR - str r1, [r2] - - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - /* (hard-coding at 398.12MHz for now). */ - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - /* Note: See label 'ENABLECLKS' for the re-enabling */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - - /* default value */ - ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ - - /* ... and write the core clock config register */ - ldr r1, =CCCR - str r2, [r1] - -#ifdef RTC - /* enable the 32Khz oscillator for RTC and PowerManager */ - - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - - @ Turn on needed clocks - @ -test: - ldr r1, =CKEN - ldr r2, =CONFIG_SYS_CKEN_VAL - str r2, [r1] - - /* ---------------------------------------------------------------- */ - /* */ - /* ---------------------------------------------------------------- */ - - /* Save SDRAM size ?*/ - ldr r1, =DRAM_SIZE - str r8, [r1] - - /* FIXME */ - -#define NODEBUG -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -#endif - - /* ---------------------------------------------------------------- */ - /* End lowlevel_init */ - /* ---------------------------------------------------------------- */ - -endlowlevel_init: - - mov pc, lr diff --git a/board/xaeniax/xaeniax.c b/board/xaeniax/xaeniax.c index 4c19c4dd4e..40b0f3b30e 100644 --- a/board/xaeniax/xaeniax.c +++ b/board/xaeniax/xaeniax.c @@ -39,8 +39,9 @@ DECLARE_GLOBAL_DATA_PTR; int board_init (void) { - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); /* arch number of xaeniax */ gd->bd->bi_arch_number = 585; @@ -58,19 +59,18 @@ int board_late_init(void) return 0; } +extern void pxa_dram_init(void); +int dram_init(void) +{ + pxa_dram_init(); + gd->ram_size = PHYS_SDRAM_1_SIZE; + return 0; +} -int dram_init (void) +void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - /* gd->bd->bi_dram[1].start = PHYS_SDRAM_2;*/ - /* gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;*/ - /* gd->bd->bi_dram[2].start = PHYS_SDRAM_3; */ - /* gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; */ - /* gd->bd->bi_dram[3].start = PHYS_SDRAM_4; */ - /* gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; */ - - return 0; } #ifdef CONFIG_CMD_NET diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 67d4106d6f..18b68fafae 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -42,6 +42,7 @@ */ #define CONFIG_PXA250 1 /* This is an PXA255 CPU */ #define CONFIG_XAENIAX 1 /* on a xaeniax board */ +#define CONFIG_SYS_TEXT_BASE 0x0 #define BOARD_LATE_INIT 1 @@ -437,8 +438,9 @@ */ #define CONFIG_SYS_PSSR_VAL 0x00000030 -#define CONFIG_SYS_CKEN_VAL 0x00000080 /* */ -#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ +#define CONFIG_SYS_CKEN 0x00000080 /* */ +#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ +#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 /* @@ -562,6 +564,9 @@ */ #define CONFIG_SYS_MDMRS_VAL 0x00320032 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 + /* * PCMCIA and CF Interfaces */ -- 2.39.5