From 1222305b55e2809ee9f7945ecc1f776e08943728 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Sat, 19 Dec 2015 23:29:26 +0200 Subject: [PATCH] arm: lpc32xx: switch SPL builds to driver model For NXP LPC32xx boards the change enables SPL_DM option, this allows to use any driver model UART driver in SPL images, hence a restriction on HSUART in SPL image is removed and well as definitions for non-DM NS16550 driver, its DM version is used instead. Because SPL_DM requires malloc(), enable CONFIG_SPL_SYS_MALLOC_SIMPLE for LPC32xx boards. The change adds about 5KB to the resulting SPL image (for devkit3250 board SPL image is increased from 10672 to 15608 bytes). Signed-off-by: Vladimir Zapolskiy Reviewed-by: Simon Glass --- arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 2 +- arch/arm/include/asm/arch-lpc32xx/config.h | 19 +------------------ configs/devkit3250_defconfig | 2 ++ configs/work_92105_defconfig | 2 ++ 4 files changed, 6 insertions(+), 19 deletions(-) diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c index 6f1018607c..b6db23e981 100644 --- a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c +++ b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c @@ -43,7 +43,7 @@ void lpc32xx_uart_init(unsigned int uart_id) &clk->u3clk + (uart_id - 3)); } -#if !CONFIG_IS_ENABLED(OF_CONTROL) && !defined(CONFIG_SPL_BUILD) +#if !CONFIG_IS_ENABLED(OF_CONTROL) static const struct ns16550_platdata lpc32xx_uart[] = { { UART3_BASE, 2, CONFIG_SYS_NS16550_CLK }, { UART4_BASE, 2, CONFIG_SYS_NS16550_CLK }, diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h index 27e60e1cea..3b7f6bdb72 100644 --- a/arch/arm/include/asm/arch-lpc32xx/config.h +++ b/arch/arm/include/asm/arch-lpc32xx/config.h @@ -18,33 +18,16 @@ /* UART configuration */ #if (CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \ (CONFIG_SYS_LPC32XX_UART == 7) -#if defined(CONFIG_SPL_BUILD) -/* SPL images do not support LPC32xx HSUART, UART5 is selected for SPL */ -#undef CONFIG_SYS_LPC32XX_UART -#define CONFIG_SYS_LPC32XX_UART 5 -#endif - #if !defined(CONFIG_LPC32XX_HSUART) #define CONFIG_LPC32XX_HSUART #endif #endif -#if defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() - -#define CONFIG_SYS_NS16550_COM1 UART3_BASE -#define CONFIG_SYS_NS16550_COM2 UART4_BASE -#define CONFIG_SYS_NS16550_COM3 UART5_BASE -#define CONFIG_SYS_NS16550_COM4 UART6_BASE -#endif - #if !defined(CONFIG_SYS_NS16550_CLK) #define CONFIG_SYS_NS16550_CLK 13000000 #endif -#if !defined(CONFIG_LPC32XX_HSUART) || defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_LPC32XX_HSUART) #define CONFIG_CONS_INDEX (CONFIG_SYS_LPC32XX_UART - 2) #else #define CONFIG_CONS_INDEX CONFIG_SYS_LPC32XX_UART diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig index 0abb8e09e0..ddf09fe5eb 100644 --- a/configs/devkit3250_defconfig +++ b/configs/devkit3250_defconfig @@ -1,5 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_DEVKIT3250=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_DM=y CONFIG_DM_SERIAL=y CONFIG_DM_GPIO=y CONFIG_SPL=y diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig index a5a108ee6e..1a9097a9a6 100644 --- a/configs/work_92105_defconfig +++ b/configs/work_92105_defconfig @@ -1,5 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_WORK_92105=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_DM=y CONFIG_DM_SERIAL=y CONFIG_DM_GPIO=y CONFIG_SPL=y -- 2.39.5