From 1230e7bc2d775216d0ce627a82821c9ae2b08334 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 30 Nov 2012 05:22:13 +0000 Subject: [PATCH] mxs: Properly setup VDDD in power supply setup code The memory setup code adjusted the VDDD voltage. Remove this adjustment and configure the VDDD voltage correctly in the power supply setup code. Signed-off-by: Marek Vasut Cc: Stefano Babic Cc: Fabio Estevam --- arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 13 ------------- arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 2 +- 2 files changed, 1 insertion(+), 14 deletions(-) diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index e693145b90..8904e246a4 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -171,17 +171,6 @@ void mxs_mem_setup_vdda(void) &power_regs->hw_power_vddactrl); } -void mxs_mem_setup_vddd(void) -{ - struct mxs_power_regs *power_regs = - (struct mxs_power_regs *)MXS_POWER_BASE; - - writel((0x1c << POWER_VDDDCTRL_TRG_OFFSET) | - (0x7 << POWER_VDDDCTRL_BO_OFFSET_OFFSET) | - POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW, - &power_regs->hw_power_vdddctrl); -} - uint32_t mxs_mem_get_size(void) { uint32_t sz, da; @@ -241,8 +230,6 @@ void mxs_mem_init(void) while (!(readl(MXS_DRAM_BASE + 0xe8) & (1 << 20))) ; - mxs_mem_setup_vddd(); - early_delay(10000); mxs_mem_setup_cpu_and_hbus(); diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index 0d80158fa3..2bc6ad1da3 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -897,7 +897,7 @@ void mxs_power_init(void) mxs_enable_output_rail_protection(); mxs_power_set_vddx(&mxs_vddio_cfg, 3300, 3150); - mxs_power_set_vddx(&mxs_vddd_cfg, 1350, 1200); + mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000); writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ | -- 2.39.5