From 12c2f1ee3c3e26950b39b779db4b6636759778ff Mon Sep 17 00:00:00 2001 From: Simon Schwarz Date: Wed, 14 Sep 2011 15:30:16 -0400 Subject: [PATCH] spl: add NAND Library to new SPL Adds NAND library to SPL. Signed-off-by: Simon Schwarz Acked-by: Scott Wood Signed-off-by: Sandeep Paulraj --- doc/README.SPL | 1 + drivers/mtd/nand/Makefile | 10 +- drivers/mtd/nand/nand_base.c | 4 +- drivers/mtd/nand/nand_spl_simple.c | 245 +++++++++++++++++++++++++++++ drivers/mtd/nand/omap_gpmc.c | 27 ++++ include/nand.h | 5 +- spl/Makefile | 1 + 7 files changed, 288 insertions(+), 5 deletions(-) create mode 100644 drivers/mtd/nand/nand_spl_simple.c diff --git a/doc/README.SPL b/doc/README.SPL index 30624a50f0..057360e4c4 100644 --- a/doc/README.SPL +++ b/doc/README.SPL @@ -60,3 +60,4 @@ CONFIG_SPL_SPI_FLASH_SUPPORT (drivers/mtd/spi/libspi_flash.o) CONFIG_SPL_SPI_SUPPORT (drivers/spi/libspi.o) CONFIG_SPL_FAT_SUPPORT (fs/fat/libfat.o) CONFIG_SPL_LIBGENERIC_SUPPORT (lib/libgeneric.o) +CONFIG_SPL_NAND_SUPPORT (drivers/mtd/nand/libnand.o) diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 8b598f6bfe..b6a7886382 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -26,12 +26,18 @@ include $(TOPDIR)/config.mk LIB := $(obj)libnand.o ifdef CONFIG_CMD_NAND +ifdef CONFIG_SPL_BUILD +ifdef CONFIG_SPL_NAND_SIMPLE +COBJS-y += nand_spl_simple.o +endif +else COBJS-y += nand.o -COBJS-y += nand_base.o COBJS-y += nand_bbt.o -COBJS-y += nand_ecc.o COBJS-y += nand_ids.o COBJS-y += nand_util.o +endif +COBJS-y += nand_ecc.o +COBJS-y += nand_base.o COBJS-$(CONFIG_NAND_ATMEL) += atmel_nand.o COBJS-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 1a95a91318..e7dfcb1568 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -213,7 +213,7 @@ static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) * * Default read function for 8bit buswith */ -static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { int i; struct nand_chip *chip = mtd->priv; @@ -269,7 +269,7 @@ static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) * * Default read function for 16bit buswith */ -static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) +void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) { int i; struct nand_chip *chip = mtd->priv; diff --git a/drivers/mtd/nand/nand_spl_simple.c b/drivers/mtd/nand/nand_spl_simple.c new file mode 100644 index 0000000000..71491d44b5 --- /dev/null +++ b/drivers/mtd/nand/nand_spl_simple.c @@ -0,0 +1,245 @@ +/* + * (C) Copyright 2006-2008 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS; +static nand_info_t mtd; +static struct nand_chip nand_chip; + +#if (CONFIG_SYS_NAND_PAGE_SIZE <= 512) +/* + * NAND command for small page NAND devices (512) + */ +static int nand_command(int block, int page, uint32_t offs, + u8 cmd) +{ + struct nand_chip *this = mtd.priv; + int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT; + + while (!this->dev_ready(&mtd)) + ; + + /* Begin command latch cycle */ + this->cmd_ctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE); + /* Set ALE and clear CLE to start address cycle */ + /* Column address */ + this->cmd_ctrl(&mtd, offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE); + this->cmd_ctrl(&mtd, page_addr & 0xff, NAND_CTRL_ALE); /* A[16:9] */ + this->cmd_ctrl(&mtd, (page_addr >> 8) & 0xff, + NAND_CTRL_ALE); /* A[24:17] */ +#ifdef CONFIG_SYS_NAND_4_ADDR_CYCLE + /* One more address cycle for devices > 32MiB */ + this->cmd_ctrl(&mtd, (page_addr >> 16) & 0x0f, + NAND_CTRL_ALE); /* A[28:25] */ +#endif + /* Latch in address */ + this->cmd_ctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + + /* + * Wait a while for the data to be ready + */ + while (!this->dev_ready(&mtd)) + ; + + return 0; +} +#else +/* + * NAND command for large page NAND devices (2k) + */ +static int nand_command(int block, int page, uint32_t offs, + u8 cmd) +{ + struct nand_chip *this = mtd.priv; + int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT; + void (*hwctrl)(struct mtd_info *mtd, int cmd, + unsigned int ctrl) = this->cmd_ctrl; + + while (!this->dev_ready(&mtd)) + ; + + /* Emulate NAND_CMD_READOOB */ + if (cmd == NAND_CMD_READOOB) { + offs += CONFIG_SYS_NAND_PAGE_SIZE; + cmd = NAND_CMD_READ0; + } + + /* Shift the offset from byte addressing to word addressing. */ + if (this->options & NAND_BUSWIDTH_16) + offs >>= 1; + + /* Begin command latch cycle */ + hwctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE); + /* Set ALE and clear CLE to start address cycle */ + /* Column address */ + hwctrl(&mtd, offs & 0xff, + NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */ + hwctrl(&mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */ + /* Row address */ + hwctrl(&mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */ + hwctrl(&mtd, ((page_addr >> 8) & 0xff), + NAND_CTRL_ALE); /* A[27:20] */ +#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE + /* One more address cycle for devices > 128MiB */ + hwctrl(&mtd, (page_addr >> 16) & 0x0f, + NAND_CTRL_ALE); /* A[31:28] */ +#endif + /* Latch in address */ + hwctrl(&mtd, NAND_CMD_READSTART, + NAND_CTRL_CLE | NAND_CTRL_CHANGE); + hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + + /* + * Wait a while for the data to be ready + */ + while (!this->dev_ready(&mtd)) + ; + + return 0; +} +#endif + +static int nand_is_bad_block(int block) +{ + struct nand_chip *this = mtd.priv; + + nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS, + NAND_CMD_READOOB); + + /* + * Read one byte (or two if it's a 16 bit chip). + */ + if (this->options & NAND_BUSWIDTH_16) { + if (readw(this->IO_ADDR_R) != 0xffff) + return 1; + } else { + if (readb(this->IO_ADDR_R) != 0xff) + return 1; + } + + return 0; +} + +static int nand_read_page(int block, int page, void *dst) +{ + struct nand_chip *this = mtd.priv; + u_char *ecc_calc; + u_char *ecc_code; + u_char *oob_data; + int i; + int eccsize = CONFIG_SYS_NAND_ECCSIZE; + int eccbytes = CONFIG_SYS_NAND_ECCBYTES; + int eccsteps = CONFIG_SYS_NAND_ECCSTEPS; + uint8_t *p = dst; + int stat; + + nand_command(block, page, 0, NAND_CMD_READ0); + + /* No malloc available for now, just use some temporary locations + * in SDRAM + */ + ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000); + ecc_code = ecc_calc + 0x100; + oob_data = ecc_calc + 0x200; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + this->ecc.hwctl(&mtd, NAND_ECC_READ); + this->read_buf(&mtd, p, eccsize); + this->ecc.calculate(&mtd, p, &ecc_calc[i]); + } + this->read_buf(&mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE); + + /* Pick the ECC bytes out of the oob data */ + for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++) + ecc_code[i] = oob_data[nand_ecc_pos[i]]; + + eccsteps = CONFIG_SYS_NAND_ECCSTEPS; + p = dst; + + for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + /* No chance to do something with the possible error message + * from correct_data(). We just hope that all possible errors + * are corrected by this routine. + */ + stat = this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]); + } + + return 0; +} + +int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst) +{ + unsigned int block, lastblock; + unsigned int page; + + /* + * offs has to be aligned to a page address! + */ + block = offs / CONFIG_SYS_NAND_BLOCK_SIZE; + lastblock = (offs + size - 1) / CONFIG_SYS_NAND_BLOCK_SIZE; + page = (offs % CONFIG_SYS_NAND_BLOCK_SIZE) / CONFIG_SYS_NAND_PAGE_SIZE; + + while (block <= lastblock) { + if (!nand_is_bad_block(block)) { + /* + * Skip bad blocks + */ + while (page < CONFIG_SYS_NAND_PAGE_COUNT) { + nand_read_page(block, page, dst); + dst += CONFIG_SYS_NAND_PAGE_SIZE; + page++; + } + + page = 0; + } else { + lastblock++; + } + + block++; + } + + return 0; +} + +/* nand_init() - initialize data to make nand usable by SPL */ +void nand_init(void) +{ + /* + * Init board specific nand support + */ + mtd.priv = &nand_chip; + nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = + (void __iomem *)CONFIG_SYS_NAND_BASE; + nand_chip.options = 0; + board_nand_init(&nand_chip); + + if (nand_chip.select_chip) + nand_chip.select_chip(&mtd, 0); +} + +/* Unselect after operation */ +void nand_deselect(void) +{ + if (nand_chip.select_chip) + nand_chip.select_chip(&mtd, -1); +} diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index 99b9cef17c..5bbec48be2 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -61,6 +61,14 @@ static void omap_nand_hwcontrol(struct mtd_info *mtd, int32_t cmd, writeb(cmd, this->IO_ADDR_W); } +#ifdef CONFIG_SPL_BUILD +/* Check wait pin as dev ready indicator */ +int omap_spl_dev_ready(struct mtd_info *mtd) +{ + return gpmc_cfg->status & (1 << 8); +} +#endif + /* * omap_hwecc_init - Initialize the Hardware ECC for NAND flash in * GPMC controller @@ -224,6 +232,7 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode) } } +#ifndef CONFIG_SPL_BUILD /* * omap_nand_switch_ecc - switch the ECC operation b/w h/w ecc and s/w ecc. * The default is to come up on s/w ecc @@ -280,6 +289,7 @@ void omap_nand_switch_ecc(int32_t hardware) nand->options &= ~NAND_OWN_BUFFERS; } +#endif /* CONFIG_SPL_BUILD */ /* * Board-specific NAND initialization. The following members of the @@ -338,7 +348,24 @@ int board_nand_init(struct nand_chip *nand) nand->chip_delay = 100; /* Default ECC mode */ +#ifndef CONFIG_SPL_BUILD nand->ecc.mode = NAND_ECC_SOFT; +#else + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.layout = &hw_nand_oob; + nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; + nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; + nand->ecc.hwctl = omap_enable_hwecc; + nand->ecc.correct = omap_correct_data; + nand->ecc.calculate = omap_calculate_ecc; + omap_hwecc_init(nand); + + if (nand->options & NAND_BUSWIDTH_16) + nand->read_buf = nand_read_buf16; + else + nand->read_buf = nand_read_buf; + nand->dev_ready = omap_spl_dev_ready; +#endif return 0; } diff --git a/include/nand.h b/include/nand.h index 3c5ef4e3c4..b4140794c5 100644 --- a/include/nand.h +++ b/include/nand.h @@ -132,9 +132,12 @@ int nand_lock( nand_info_t *meminfo, int tight ); int nand_unlock( nand_info_t *meminfo, ulong start, ulong length ); int nand_get_lock_status(nand_info_t *meminfo, loff_t offset); -void nand_spl_load_image(loff_t offs, unsigned int size, uchar *dst); +int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst); void nand_deselect(void); +void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len); +void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len); + #ifdef CONFIG_SYS_NAND_SELECT_DEVICE void board_nand_select_device(struct nand_chip *nand, int chip); #endif diff --git a/spl/Makefile b/spl/Makefile index 95ecce1563..1e912f0de2 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -46,6 +46,7 @@ LIBS-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/libspi_flash.o LIBS-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/libspi.o LIBS-$(CONFIG_SPL_FAT_SUPPORT) += fs/fat/libfat.o LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/libgeneric.o +LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/libnand.o ifeq ($(SOC),omap3) LIBS-y += $(CPUDIR)/omap-common/libomap-common.o -- 2.39.5