From 1480fdf8a6dad28de70ade72974db436f7967525 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 31 Jul 2015 19:55:08 -0400 Subject: [PATCH] am33xx: Update DT files, add am335x_gp_evm_config target - Re-sync DT files for am33xx with Linux Kernel v4.1 - Include DT file now for the "AM335x GP EVM" and build target for it, via device tree and DM. - We only need to provide platform data for UART when OF_CONTROL isn't also enabled really. We can just push GPIO to coming from DT Signed-off-by: Tom Rini --- arch/arm/cpu/armv7/am33xx/board.c | 36 +- arch/arm/dts/Makefile | 2 +- arch/arm/dts/am335x-bone-common.dtsi | 410 +++++++++----- arch/arm/dts/am335x-bone.dts | 29 + arch/arm/dts/am335x-boneblack.dts | 72 +++ arch/arm/dts/am335x-evm.dts | 765 +++++++++++++++++++++++++++ arch/arm/dts/am33xx-clocks.dtsi | 646 ++++++++++++++++++++++ arch/arm/dts/am33xx.dtsi | 297 +++++++++-- arch/arm/dts/tps65910.dtsi | 91 ++++ configs/am335x_gp_evm_defconfig | 14 + 10 files changed, 2156 insertions(+), 206 deletions(-) create mode 100644 arch/arm/dts/am335x-bone.dts create mode 100644 arch/arm/dts/am335x-evm.dts create mode 100644 arch/arm/dts/am33xx-clocks.dtsi create mode 100644 arch/arm/dts/tps65910.dtsi create mode 100644 configs/am335x_gp_evm_defconfig diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 377c611eb6..a1cb4ecf57 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -38,45 +38,22 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_DM_GPIO -static const struct omap_gpio_platdata am33xx_gpio[] = { - { 0, AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, - { 1, AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, - { 2, AM33XX_GPIO2_BASE, METHOD_GPIO_24XX }, - { 3, AM33XX_GPIO3_BASE, METHOD_GPIO_24XX }, -#ifdef CONFIG_AM43XX - { 4, AM33XX_GPIO4_BASE, METHOD_GPIO_24XX }, - { 5, AM33XX_GPIO5_BASE, METHOD_GPIO_24XX }, -#endif -}; - -U_BOOT_DEVICES(am33xx_gpios) = { - { "gpio_omap", &am33xx_gpio[0] }, - { "gpio_omap", &am33xx_gpio[1] }, - { "gpio_omap", &am33xx_gpio[2] }, - { "gpio_omap", &am33xx_gpio[3] }, -#ifdef CONFIG_AM43XX - { "gpio_omap", &am33xx_gpio[4] }, - { "gpio_omap", &am33xx_gpio[5] }, -#endif -}; - -# ifndef CONFIG_OF_CONTROL +#if defined(CONFIG_DM_SERIAL) && !defined(CONFIG_OF_CONTROL) /* * TODO(sjg@chromium.org): When we can move SPL serial to DM, we can remove * the CONFIGs. At the same time, we should move this to the board files. */ static const struct ns16550_platdata am33xx_serial[] = { { CONFIG_SYS_NS16550_COM1, 2, CONFIG_SYS_NS16550_CLK }, -# ifdef CONFIG_SYS_NS16550_COM2 +# ifdef CONFIG_SYS_NS16550_COM2 { CONFIG_SYS_NS16550_COM2, 2, CONFIG_SYS_NS16550_CLK }, -# ifdef CONFIG_SYS_NS16550_COM3 +# ifdef CONFIG_SYS_NS16550_COM3 { CONFIG_SYS_NS16550_COM3, 2, CONFIG_SYS_NS16550_CLK }, { CONFIG_SYS_NS16550_COM4, 2, CONFIG_SYS_NS16550_CLK }, { CONFIG_SYS_NS16550_COM5, 2, CONFIG_SYS_NS16550_CLK }, { CONFIG_SYS_NS16550_COM6, 2, CONFIG_SYS_NS16550_CLK }, -# endif # endif +# endif }; U_BOOT_DEVICES(am33xx_uarts) = { @@ -91,10 +68,10 @@ U_BOOT_DEVICES(am33xx_uarts) = { # endif # endif }; -# endif +#endif -#else +#ifndef CONFIG_DM_GPIO static const struct gpio_bank gpio_bank_am33xx[] = { { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, @@ -107,7 +84,6 @@ static const struct gpio_bank gpio_bank_am33xx[] = { }; const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; - #endif #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 3aaeb6a53c..ef71ac1ca5 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -52,7 +52,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \ zynq-zc770-xm011.dtb \ zynq-zc770-xm012.dtb \ zynq-zc770-xm013.dtb -dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb +dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-evm.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ diff --git a/arch/arm/dts/am335x-bone-common.dtsi b/arch/arm/dts/am335x-bone-common.dtsi index e70b4d1f1f..fec78349c1 100644 --- a/arch/arm/dts/am335x-bone-common.dtsi +++ b/arch/arm/dts/am335x-bone-common.dtsi @@ -7,13 +7,6 @@ */ / { - model = "TI AM335x BeagleBone"; - compatible = "ti,am335x-bone", "ti,am33xx"; - - chosen { - stdout-path = &uart0; - }; - cpus { cpu@0 { cpu0-supply = <&dcdc2_reg>; @@ -25,184 +18,299 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - am33xx_pinmux: pinmux@44e10800 { + leds { pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin>; - - user_leds_s0: user_leds_s0 { - pinctrl-single,pins = < - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ - 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ - >; - }; + pinctrl-0 = <&user_leds_s0>; - i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ - >; - }; + compatible = "gpio-leds"; - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; + led@2 { + label = "beaglebone:green:heartbeat"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; }; - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; + led@3 { + label = "beaglebone:green:mmc0"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; }; - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ - 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ - 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ - 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ - 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ - >; + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; }; - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 reset value */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; }; + }; - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; }; - ocp { - uart0: serial@44e09000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; - status = "okay"; - }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; - musb: usb@47400000 { - status = "okay"; + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; - control@44e10000 { - status = "okay"; - }; + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; - usb-phy@47401300 { - status = "okay"; - }; + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; - usb-phy@47401b00 { - status = "okay"; - }; + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; - usb@47401000 { - status = "okay"; - }; + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; - dma-controller@07402000 { - status = "okay"; - }; - }; + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; - i2c0: i2c@44e0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; - status = "okay"; - clock-frequency = <400000>; +&usb { + status = "okay"; +}; - tps: tps@24 { - reg = <0x24>; - }; +&usb_ctrl_mod { + status = "okay"; +}; +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; }; }; +}; - leds { - pinctrl-names = "default"; - pinctrl-0 = <&user_leds_s0>; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; - compatible = "gpio-leds"; + status = "okay"; + clock-frequency = <100000>; - led@2 { - label = "beaglebone:green:heartbeat"; - gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; + cape_eeprom0: cape_eeprom0@54 { + compatible = "at,24c256"; + reg = <0x54>; + #address-cells = <1>; + #size-cells = <1>; + cape0_data: cape_data@0 { + reg = <0 0x100>; }; + }; - led@3 { - label = "beaglebone:green:mmc0"; - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; + cape_eeprom1: cape_eeprom1@55 { + compatible = "at,24c256"; + reg = <0x55>; + #address-cells = <1>; + #size-cells = <1>; + cape1_data: cape_data@0 { + reg = <0 0x100>; }; + }; - led@4 { - label = "beaglebone:green:usr2"; - gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; - default-state = "off"; + cape_eeprom2: cape_eeprom2@56 { + compatible = "at,24c256"; + reg = <0x56>; + #address-cells = <1>; + #size-cells = <1>; + cape2_data: cape_data@0 { + reg = <0 0x100>; }; + }; - led@5 { - label = "beaglebone:green:usr3"; - gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; - default-state = "off"; + cape_eeprom3: cape_eeprom3@57 { + compatible = "at,24c256"; + reg = <0x57>; + #address-cells = <1>; + #size-cells = <1>; + cape3_data: cape_data@0 { + reg = <0 0x100>; }; }; }; + /include/ "tps65217.dtsi" &tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ + ti,pmic-shutdown-controller; + regulators { dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; regulator-always-on; }; @@ -225,18 +333,22 @@ }; ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; regulator-always-on; }; ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; regulator-always-on; }; ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; regulator-always-on; }; }; @@ -256,11 +368,29 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; - + status = "okay"; }; &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; +}; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; }; diff --git a/arch/arm/dts/am335x-bone.dts b/arch/arm/dts/am335x-bone.dts new file mode 100644 index 0000000000..81441cc823 --- /dev/null +++ b/arch/arm/dts/am335x-bone.dts @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; + chosen { + stdout-path = &uart0; + }; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&ldo3_reg>; +}; diff --git a/arch/arm/dts/am335x-boneblack.dts b/arch/arm/dts/am335x-boneblack.dts index 197cadf72d..679248aa02 100644 --- a/arch/arm/dts/am335x-boneblack.dts +++ b/arch/arm/dts/am335x-boneblack.dts @@ -10,8 +10,80 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; + chosen { + stdout-path = &uart0; + }; +}; + &ldo3_reg { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; +}; + +&lcdc { + status = "okay"; +}; + +/ { + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + status = "okay"; + }; +}; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/dts/am335x-evm.dts b/arch/arm/dts/am335x-evm.dts new file mode 100644 index 0000000000..e1c5d4f76c --- /dev/null +++ b/arch/arm/dts/am335x-evm.dts @@ -0,0 +1,765 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include + +/ { + model = "TI AM335x EVM"; + compatible = "ti,am335x-evm", "ti,am33xx"; + + chosen { + stdout-path = &uart0; + }; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; + + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* WLAN_EN GPIO for this board - Bank1, pin16 */ + gpio = <&gpio1 16 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; + + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <2>; + + row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH /* Bank1, pin25 */ + &gpio1 26 GPIO_ACTIVE_HIGH /* Bank1, pin26 */ + &gpio1 27 GPIO_ACTIVE_HIGH>; /* Bank1, pin27 */ + + col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH /* Bank1, pin21 */ + &gpio1 22 GPIO_ACTIVE_HIGH>; /* Bank1, pin22 */ + + linux,keymap = <0x0000008b /* MENU */ + 0x0100009e /* BACK */ + 0x02000069 /* LEFT */ + 0x0001006a /* RIGHT */ + 0x0101001c /* ENTER */ + 0x0201006c>; /* DOWN */ + }; + + gpio_keys: volume_keys@0 { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + switch@9 { + label = "volume-up"; + linux,code = <115>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + + switch@10 { + label = "volume-down"; + linux,code = <114>; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + panel { + compatible = "ti,tilcdc,panel"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins_s0>; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + display-timings { + 800x480p62 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <39>; + hback-porch = <39>; + hsync-len = <47>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "AM335x-EVM"; + ti,audio-codec = <&tlv320aic3106>; + ti,mcasp-controller = <&mcasp1>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>; + + matrix_keypad_s0: matrix_keypad_s0 { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + >; + }; + + volume_keys_s0: volume_keys_s0 { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */ + 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ + 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + nandflash_pins_s0: nandflash_pins_s0 { + pinctrl-single,pins = < + 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; + + ecap0_pins: backlight_pins { + pinctrl-single,pins = < + 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */ + 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */ + 0x4C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */ + 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */ + 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */ + 0x8C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */ + >; + }; + + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */ + 0x19C (PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ + 0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */ + >; + }; + + lcd_pins_s0: lcd_pins_s0 { + pinctrl-single,pins = < + 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ + 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ + 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ + 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ + 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ + 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ + 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ + 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + am335x_evm_audio_pins: am335x_evm_audio_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + >; + }; + + dcan1_pins_default: dcan1_pins_default { + pinctrl-single,pins = < + 0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + 0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <100000>; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + + tsl2550: tsl2550@39 { + compatible = "taos,tsl2550"; + reg = <0x39>; + }; + + tmp275: tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tlv320aic3106: tlv320aic3106@1b { + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + status = "okay"; + + /* Regulators */ + AVDD-supply = <&vaux2_reg>; + IOVDD-supply = <&vaux2_reg>; + DRVDD-supply = <&vaux2_reg>; + DVDD-supply = <&vbat>; + }; +}; + +&lcdc { + status = "okay"; +}; + +&elm { + status = "okay"; +}; + +&epwmss0 { + status = "okay"; + + ecap0: ecap@48300100 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins>; + }; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins_s0>; + ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ + nand@0,0 { + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + /* MTD partition table */ + /* All SPL-* partitions are sized to minimal length + * which can be independently programmable. For + * NAND flash this is equal to size of erase-block */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "NAND.SPL"; + reg = <0x00000000 0x000020000>; + }; + partition@1 { + label = "NAND.SPL.backup1"; + reg = <0x00020000 0x00020000>; + }; + partition@2 { + label = "NAND.SPL.backup2"; + reg = <0x00040000 0x00020000>; + }; + partition@3 { + label = "NAND.SPL.backup3"; + reg = <0x00060000 0x00020000>; + }; + partition@4 { + label = "NAND.u-boot-spl-os"; + reg = <0x00080000 0x00040000>; + }; + partition@5 { + label = "NAND.u-boot"; + reg = <0x000C0000 0x00100000>; + }; + partition@6 { + label = "NAND.u-boot-env"; + reg = <0x001C0000 0x00020000>; + }; + partition@7 { + label = "NAND.u-boot-env.backup1"; + reg = <0x001E0000 0x00020000>; + }; + partition@8 { + label = "NAND.kernel"; + reg = <0x00200000 0x00800000>; + }; + partition@9 { + label = "NAND.file-system"; + reg = <0x00A00000 0x0F600000>; + }; + }; +}; + +#include "tps65910.dtsi" + +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&am335x_evm_audio_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii-txid"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii-txid"; +}; + +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + ti,charge-delay = <0x400>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; +}; + +&mmc3 { + /* these are on the crossbar and are outlined in the + xbar-event-map element */ + dmas = <&edma 12 + &edma 13>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wlan_pins>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio3>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&edma { + ti,edma-xbar-event-map = /bits/ 16 <1 12 + 2 13>; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&dcan1 { + status = "disabled"; /* Enable only if Profile 1 is selected */ + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins_default>; +}; diff --git a/arch/arm/dts/am33xx-clocks.dtsi b/arch/arm/dts/am33xx-clocks.dtsi new file mode 100644 index 0000000000..afb4b3a7ba --- /dev/null +++ b/arch/arm/dts/am33xx-clocks.dtsi @@ -0,0 +1,646 @@ +/* + * Device Tree Source for AM33xx clock data + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +&scm_clocks { + sys_clkin_ck: sys_clkin_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; + ti,bit-shift = <22>; + reg = <0x0040>; + }; + + adc_tsc_fck: adc_tsc_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dcan0_fck: dcan0_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dcan1_fck: dcan1_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + mcasp0_fck: mcasp0_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + mcasp1_fck: mcasp1_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + smartreflex0_fck: smartreflex0_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + smartreflex1_fck: smartreflex1_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + sha0_fck: sha0_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + aes0_fck: aes0_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + rng_fck: rng_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <0>; + reg = <0x0664>; + }; + + ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <1>; + reg = <0x0664>; + }; + + ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <2>; + reg = <0x0664>; + }; +}; +&prcm_clocks { + clk_32768_ck: clk_32768_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + clk_rc32k_ck: clk_rc32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; + + virt_19200000_ck: virt_19200000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19200000>; + }; + + virt_24000000_ck: virt_24000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + virt_25000000_ck: virt_25000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + virt_26000000_ck: virt_26000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + tclkin_ck: tclkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + + dpll_core_ck: dpll_core_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-core-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x0490>, <0x045c>, <0x0468>; + }; + + dpll_core_x2_ck: dpll_core_x2_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-x2-clock"; + clocks = <&dpll_core_ck>; + }; + + dpll_core_m4_ck: dpll_core_m4_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + reg = <0x0480>; + ti,index-starts-at-one; + }; + + dpll_core_m5_ck: dpll_core_m5_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + reg = <0x0484>; + ti,index-starts-at-one; + }; + + dpll_core_m6_ck: dpll_core_m6_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + reg = <0x04d8>; + ti,index-starts-at-one; + }; + + dpll_mpu_ck: dpll_mpu_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x0488>, <0x0420>, <0x042c>; + }; + + dpll_mpu_m2_ck: dpll_mpu_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_mpu_ck>; + ti,max-div = <31>; + reg = <0x04a8>; + ti,index-starts-at-one; + }; + + dpll_ddr_ck: dpll_ddr_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-no-gate-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x0494>, <0x0434>, <0x0440>; + }; + + dpll_ddr_m2_ck: dpll_ddr_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_ddr_ck>; + ti,max-div = <31>; + reg = <0x04a0>; + ti,index-starts-at-one; + }; + + dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_ddr_m2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + dpll_disp_ck: dpll_disp_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-no-gate-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x0498>, <0x0448>, <0x0454>; + }; + + dpll_disp_m2_ck: dpll_disp_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_disp_ck>; + ti,max-div = <31>; + reg = <0x04a4>; + ti,index-starts-at-one; + ti,set-rate-parent; + }; + + dpll_per_ck: dpll_per_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-no-gate-j-type-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x048c>, <0x0470>, <0x049c>; + }; + + dpll_per_m2_ck: dpll_per_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_ck>; + ti,max-div = <31>; + reg = <0x04ac>; + ti,index-starts-at-one; + }; + + dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + dpll_per_m2_div4_ck: dpll_per_m2_div4_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + cefuse_fck: cefuse_fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_clkin_ck>; + ti,bit-shift = <1>; + reg = <0x0a20>; + }; + + clk_24mhz: clk_24mhz { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2_ck>; + clock-mult = <1>; + clock-div = <8>; + }; + + clkdiv32k_ck: clkdiv32k_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&clk_24mhz>; + clock-mult = <1>; + clock-div = <732>; + }; + + clkdiv32k_ick: clkdiv32k_ick { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkdiv32k_ck>; + ti,bit-shift = <1>; + reg = <0x014c>; + }; + + l3_gclk: l3_gclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + pruss_ocp_gclk: pruss_ocp_gclk { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&l3_gclk>, <&dpll_disp_m2_ck>; + reg = <0x0530>; + }; + + mmu_fck: mmu_fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_core_m4_ck>; + ti,bit-shift = <1>; + reg = <0x0914>; + }; + + timer1_fck: timer1_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; + reg = <0x0528>; + }; + + timer2_fck: timer2_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + reg = <0x0508>; + }; + + timer3_fck: timer3_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + reg = <0x050c>; + }; + + timer4_fck: timer4_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + reg = <0x0510>; + }; + + timer5_fck: timer5_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + reg = <0x0518>; + }; + + timer6_fck: timer6_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + reg = <0x051c>; + }; + + timer7_fck: timer7_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + reg = <0x0504>; + }; + + usbotg_fck: usbotg_fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_ck>; + ti,bit-shift = <8>; + reg = <0x047c>; + }; + + dpll_core_m4_div2_ck: dpll_core_m4_div2_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + ieee5000_fck: ieee5000_fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_core_m4_div2_ck>; + ti,bit-shift = <1>; + reg = <0x00e4>; + }; + + wdt1_fck: wdt1_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>; + reg = <0x0538>; + }; + + l4_rtc_gclk: l4_rtc_gclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + l4hs_gclk: l4hs_gclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + l3s_gclk: l3s_gclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_div2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + l4fw_gclk: l4fw_gclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_div2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + l4ls_gclk: l4ls_gclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_div2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + sysclk_div_ck: sysclk_div_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + cpsw_125mhz_gclk: cpsw_125mhz_gclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m5_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + cpsw_cpts_rft_clk: cpsw_cpts_rft_clk { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>; + reg = <0x0520>; + }; + + gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>; + reg = <0x053c>; + }; + + gpio0_dbclk: gpio0_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&gpio0_dbclk_mux_ck>; + ti,bit-shift = <18>; + reg = <0x0408>; + }; + + gpio1_dbclk: gpio1_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkdiv32k_ick>; + ti,bit-shift = <18>; + reg = <0x00ac>; + }; + + gpio2_dbclk: gpio2_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkdiv32k_ick>; + ti,bit-shift = <18>; + reg = <0x00b0>; + }; + + gpio3_dbclk: gpio3_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkdiv32k_ick>; + ti,bit-shift = <18>; + reg = <0x00b4>; + }; + + lcd_gclk: lcd_gclk { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; + reg = <0x0534>; + ti,set-rate-parent; + }; + + mmc_clk: mmc_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + gfx_fclk_clksel_ck: gfx_fclk_clksel_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>; + ti,bit-shift = <1>; + reg = <0x052c>; + }; + + gfx_fck_div_ck: gfx_fck_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&gfx_fclk_clksel_ck>; + reg = <0x052c>; + ti,max-div = <2>; + }; + + sysclkout_pre_ck: sysclkout_pre_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>; + reg = <0x0700>; + }; + + clkout2_div_ck: clkout2_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sysclkout_pre_ck>; + ti,bit-shift = <3>; + ti,max-div = <8>; + reg = <0x0700>; + }; + + dbg_sysclk_ck: dbg_sysclk_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_clkin_ck>; + ti,bit-shift = <19>; + reg = <0x0414>; + }; + + dbg_clka_ck: dbg_clka_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_core_m4_ck>; + ti,bit-shift = <30>; + reg = <0x0414>; + }; + + stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>; + ti,bit-shift = <22>; + reg = <0x0414>; + }; + + trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>; + ti,bit-shift = <20>; + reg = <0x0414>; + }; + + stm_clk_div_ck: stm_clk_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&stm_pmd_clock_mux_ck>; + ti,bit-shift = <27>; + ti,max-div = <64>; + reg = <0x0414>; + ti,index-power-of-two; + }; + + trace_clk_div_ck: trace_clk_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&trace_pmd_clk_mux_ck>; + ti,bit-shift = <24>; + ti,max-div = <64>; + reg = <0x0414>; + ti,index-power-of-two; + }; + + clkout2_ck: clkout2_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkout2_div_ck>; + ti,bit-shift = <7>; + reg = <0x0700>; + }; +}; + +&prcm_clockdomains { + clk_24mhz_clkdm: clk_24mhz_clkdm { + compatible = "ti,clockdomain"; + clocks = <&clkdiv32k_ick>; + }; +}; diff --git a/arch/arm/dts/am33xx.dtsi b/arch/arm/dts/am33xx.dtsi index f9c5da9c7f..21fcc440fc 100644 --- a/arch/arm/dts/am33xx.dtsi +++ b/arch/arm/dts/am33xx.dtsi @@ -18,6 +18,9 @@ interrupt-parent = <&intc>; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -30,6 +33,8 @@ usb1 = &usb1; phy0 = &usb0_phy; phy1 = &usb1_phy; + ethernet0 = &cpsw_emac0; + ethernet1 = &cpsw_emac1; }; cpus { @@ -53,12 +58,21 @@ 275000 1125000 >; voltage-tolerance = <2>; /* 2 percentage */ + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -69,19 +83,10 @@ }; }; - am33xx_pinmux: pinmux@44e10800 { - compatible = "pinctrl-single"; - reg = <0x44e10800 0x0238>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x7f>; - }; - /* * XXX: Use a flat representation of the AM33XX interconnect. - * The real AM33XX interconnect network is quite complex.Since - * that will not bring real advantage to represent that in DT + * The real AM33XX interconnect network is quite complex. Since + * it will not bring real advantage to represent that in DT * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ @@ -92,21 +97,81 @@ ranges; ti,hwmods = "l3_main"; + l4_wkup: l4_wkup@44c00000 { + compatible = "ti,am3-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x44c00000 0x280000>; + + prcm: prcm@200000 { + compatible = "ti,am3-prcm"; + reg = <0x200000 0x4000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + scm: scm@210000 { + compatible = "ti,am3-scm", "simple-bus"; + reg = <0x210000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x210000 0x2000>; + + am33xx_pinmux: pinmux@800 { + compatible = "pinctrl-single"; + reg = <0x800 0x238>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; + }; + }; + intc: interrupt-controller@48200000 { - compatible = "ti,omap2-intc"; + compatible = "ti,am33xx-intc"; interrupt-controller; #interrupt-cells = <1>; - ti,intc-size = <128>; reg = <0x48200000 0x1000>; }; + edma: edma@49000000 { + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; + reg = <0x49000000 0x10000>, + <0x44e10f90 0x40>; + interrupts = <12 13 14>; + #dma-cells = <1>; + }; + gpio0: gpio@44e07000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x44e07000 0x1000>; interrupts = <96>; }; @@ -117,7 +182,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x4804c000 0x1000>; interrupts = <98>; }; @@ -128,7 +193,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x481ac000 0x1000>; interrupts = <32>; }; @@ -139,7 +204,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x481ae000 0x1000>; interrupts = <62>; }; @@ -151,6 +216,8 @@ reg = <0x44e09000 0x2000>; interrupts = <72>; status = "disabled"; + dmas = <&edma 26>, <&edma 27>; + dma-names = "tx", "rx"; }; uart1: serial@48022000 { @@ -160,6 +227,8 @@ reg = <0x48022000 0x2000>; interrupts = <73>; status = "disabled"; + dmas = <&edma 28>, <&edma 29>; + dma-names = "tx", "rx"; }; uart2: serial@48024000 { @@ -169,6 +238,8 @@ reg = <0x48024000 0x2000>; interrupts = <74>; status = "disabled"; + dmas = <&edma 30>, <&edma 31>; + dma-names = "tx", "rx"; }; uart3: serial@481a6000 { @@ -228,6 +299,51 @@ status = "disabled"; }; + mmc1: mmc@48060000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + ti,needs-special-hs-handling; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + interrupts = <64>; + interrupt-parent = <&intc>; + reg = <0x48060000 0x1000>; + status = "disabled"; + }; + + mmc2: mmc@481d8000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&edma 2 + &edma 3>; + dma-names = "tx", "rx"; + interrupts = <28>; + interrupt-parent = <&intc>; + reg = <0x481d8000 0x1000>; + status = "disabled"; + }; + + mmc3: mmc@47810000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + interrupts = <29>; + interrupt-parent = <&intc>; + reg = <0x47810000 0x1000>; + status = "disabled"; + }; + + hwspinlock: spinlock@480ca000 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x480ca000 0x1000>; + ti,hwmods = "spinlock"; + #hwlock-cells = <1>; + }; + wdt2: wdt@44e35000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; @@ -235,24 +351,42 @@ interrupts = <91>; }; - dcan0: d_can@481cc000 { - compatible = "bosch,d_can"; + dcan0: can@481cc000 { + compatible = "ti,am3352-d_can"; ti,hwmods = "d_can0"; - reg = <0x481cc000 0x2000 - 0x44e10644 0x4>; + reg = <0x481cc000 0x2000>; + clocks = <&dcan0_fck>; + clock-names = "fck"; + syscon-raminit = <&scm_conf 0x644 0>; interrupts = <52>; status = "disabled"; }; - dcan1: d_can@481d0000 { - compatible = "bosch,d_can"; + dcan1: can@481d0000 { + compatible = "ti,am3352-d_can"; ti,hwmods = "d_can1"; - reg = <0x481d0000 0x2000 - 0x44e10644 0x4>; + reg = <0x481d0000 0x2000>; + clocks = <&dcan1_fck>; + clock-names = "fck"; + syscon-raminit = <&scm_conf 0x644 1>; interrupts = <55>; status = "disabled"; }; + mailbox: mailbox@480C8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480C8000 0x200>; + interrupts = <77>; + ti,hwmods = "mailbox"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; + }; + timer1: timer@44e31000 { compatible = "ti,am335x-timer-1ms"; reg = <0x44e31000 0x400>; @@ -307,8 +441,8 @@ ti,timer-pwm; }; - rtc@44e3e000 { - compatible = "ti,da830-rtc"; + rtc: rtc@44e3e000 { + compatible = "ti,am3352-rtc", "ti,da830-rtc"; reg = <0x44e3e000 0x1000>; interrupts = <75 76>; @@ -323,6 +457,11 @@ interrupts = <65>; ti,spi-num-cs = <2>; ti,hwmods = "spi0"; + dmas = <&edma 16 + &edma 17 + &edma 18 + &edma 19>; + dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; @@ -334,6 +473,11 @@ interrupts = <125>; ti,spi-num-cs = <2>; ti,hwmods = "spi1"; + dmas = <&edma 42 + &edma 43 + &edma 44 + &edma 45>; + dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; @@ -346,7 +490,7 @@ ti,hwmods = "usb_otg_hs"; status = "disabled"; - ctrl_mod: control@44e10000 { + usb_ctrl_mod: control@44e10620 { compatible = "ti,am335x-usb-ctrl-module"; reg = <0x44e10620 0x10 0x44e10648 0x4>; @@ -359,7 +503,7 @@ reg = <0x47401300 0x100>; reg-names = "phy"; status = "disabled"; - ti,ctrl_mod = <&ctrl_mod>; + ti,ctrl_mod = <&usb_ctrl_mod>; }; usb0: usb@47401000 { @@ -407,7 +551,7 @@ reg = <0x47401b00 0x100>; reg-names = "phy"; status = "disabled"; - ti,ctrl_mod = <&ctrl_mod>; + ti,ctrl_mod = <&usb_ctrl_mod>; }; usb1: usb@47401800 { @@ -449,7 +593,7 @@ "tx14", "tx15"; }; - cppi41dma: dma-controller@07402000 { + cppi41dma: dma-controller@47402000 { compatible = "ti,am3359-cppi41"; reg = <0x47400000 0x1000 0x47402000 0x1000 @@ -480,6 +624,8 @@ compatible = "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48300100 0x80>; + interrupts = <31>; + interrupt-names = "ecap0"; ti,hwmods = "ecap0"; status = "disabled"; }; @@ -508,6 +654,8 @@ compatible = "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48302100 0x80>; + interrupts = <47>; + interrupt-names = "ecap1"; ti,hwmods = "ecap1"; status = "disabled"; }; @@ -536,6 +684,8 @@ compatible = "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48304100 0x80>; + interrupts = <61>; + interrupt-names = "ecap2"; ti,hwmods = "ecap2"; status = "disabled"; }; @@ -552,6 +702,8 @@ mac: ethernet@4a100000 { compatible = "ti,cpsw"; ti,hwmods = "cpgmac0"; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; + clock-names = "fck", "cpts"; cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; @@ -575,6 +727,8 @@ */ interrupts = <40 41 42 43>; ranges; + syscon = <&scm_conf>; + status = "disabled"; davinci_mdio: mdio@4a101000 { compatible = "ti,davinci_mdio"; @@ -583,6 +737,7 @@ ti,hwmods = "davinci_mdio"; bus_freq = <1000000>; reg = <0x4a101000 0x100>; + status = "disabled"; }; cpsw_emac0: slave@4a100200 { @@ -594,12 +749,17 @@ /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; + + phy_sel: cpsw-phy-sel@44e10650 { + compatible = "ti,am3352-cpsw-phy-sel"; + reg= <0x44e10650 0x4>; + reg-names = "gmii-sel"; + }; }; ocmcram: ocmcram@40300000 { - compatible = "ti,am3352-ocmcram"; - reg = <0x40300000 0x10000>; - ti,hwmods = "ocmcram"; + compatible = "mmio-sram"; + reg = <0x40300000 0x10000>; /* 64k */ }; wkup_m3: wkup_m3@44d00000 { @@ -607,6 +767,7 @@ reg = <0x44d00000 0x4000 /* M3 UMEM */ 0x44d80000 0x2000>; /* M3 DMEM */ ti,hwmods = "wkup_m3"; + ti,no-reset-on-init; }; elm: elm@48080000 { @@ -617,6 +778,15 @@ status = "disabled"; }; + lcdc: lcdc@4830e000 { + compatible = "ti,am33xx-tilcdc"; + reg = <0x4830e000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <36>; + ti,hwmods = "lcdc"; + status = "disabled"; + }; + tscadc: tscadc@44e0d000 { compatible = "ti,am3359-tscadc"; reg = <0x44e0d000 0x1000>; @@ -637,6 +807,7 @@ gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; + ti,no-idle-on-init; reg = <0x50000000 0x2000>; interrupts = <100>; gpmc,num-cs = <7>; @@ -645,5 +816,61 @@ #size-cells = <1>; status = "disabled"; }; + + sham: sham@53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + reg = <0x53100000 0x200>; + interrupts = <109>; + dmas = <&edma 36>; + dma-names = "rx"; + }; + + aes: aes@53500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + reg = <0x53500000 0xa0>; + interrupts = <103>; + dmas = <&edma 6>, + <&edma 5>; + dma-names = "tx", "rx"; + }; + + mcasp0: mcasp@48038000 { + compatible = "ti,am33xx-mcasp-audio"; + ti,hwmods = "mcasp0"; + reg = <0x48038000 0x2000>, + <0x46000000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <80>, <81>; + interrupt-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 8>, + <&edma 9>; + dma-names = "tx", "rx"; + }; + + mcasp1: mcasp@4803C000 { + compatible = "ti,am33xx-mcasp-audio"; + ti,hwmods = "mcasp1"; + reg = <0x4803C000 0x2000>, + <0x46400000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <82>, <83>; + interrupt-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 10>, + <&edma 11>; + dma-names = "tx", "rx"; + }; + + rng: rng@48310000 { + compatible = "ti,omap4-rng"; + ti,hwmods = "rng"; + reg = <0x48310000 0x2000>; + interrupts = <111>; + }; }; }; + +/include/ "am33xx-clocks.dtsi" diff --git a/arch/arm/dts/tps65910.dtsi b/arch/arm/dts/tps65910.dtsi new file mode 100644 index 0000000000..b0ac6657a1 --- /dev/null +++ b/arch/arm/dts/tps65910.dtsi @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65910.pdf + */ + +&tps { + compatible = "ti,tps65910"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vrtc_reg: regulator@0 { + reg = <0>; + regulator-compatible = "vrtc"; + }; + + vio_reg: regulator@1 { + reg = <1>; + regulator-compatible = "vio"; + }; + + vdd1_reg: regulator@2 { + reg = <2>; + regulator-compatible = "vdd1"; + }; + + vdd2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "vdd2"; + }; + + vdd3_reg: regulator@4 { + reg = <4>; + regulator-compatible = "vdd3"; + }; + + vdig1_reg: regulator@5 { + reg = <5>; + regulator-compatible = "vdig1"; + }; + + vdig2_reg: regulator@6 { + reg = <6>; + regulator-compatible = "vdig2"; + }; + + vpll_reg: regulator@7 { + reg = <7>; + regulator-compatible = "vpll"; + }; + + vdac_reg: regulator@8 { + reg = <8>; + regulator-compatible = "vdac"; + }; + + vaux1_reg: regulator@9 { + reg = <9>; + regulator-compatible = "vaux1"; + }; + + vaux2_reg: regulator@10 { + reg = <10>; + regulator-compatible = "vaux2"; + }; + + vaux33_reg: regulator@11 { + reg = <11>; + regulator-compatible = "vaux33"; + }; + + vmmc_reg: regulator@12 { + reg = <12>; + regulator-compatible = "vmmc"; + }; + + vbb_reg: regulator@13 { + reg = <13>; + regulator-compatible = "vbb"; + }; + }; +}; diff --git a/configs/am335x_gp_evm_defconfig b/configs/am335x_gp_evm_defconfig new file mode 100644 index 0000000000..62d3b6b4d4 --- /dev/null +++ b/configs/am335x_gp_evm_defconfig @@ -0,0 +1,14 @@ +CONFIG_ARM=y +CONFIG_TARGET_AM335X_EVM=y +CONFIG_DEFAULT_DEVICE_TREE="am335x-evm" +CONFIG_SPL=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SYS_EXTRA_OPTIONS="NAND" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y +CONFIG_SPI_FLASH=y +CONFIG_RSA=y -- 2.39.5