From 169789dcb9b7ef1a97bf1aa245316687d7ced40f Mon Sep 17 00:00:00 2001 From: Tor Krill Date: Thu, 3 Dec 2015 12:38:02 +0100 Subject: [PATCH] sata: Add SATA driver with DMA support for Marvell Kirkwood and Armada XP This patch adds a new SATA driver for the Marvell Kirkwood and Armada 370 / XP SoC's. This driver supports the SATA controller of some Mavell SoC's. Here a (most likely incomplete) list of the supported SoC's: - Kirkwood - Armada 370 - Armada XP This driver implementation is an alternative to the already available driver via the "ide" commands interface (drivers/block/mvsata_ide.c). But this driver only supports PIO mode and as this new driver also supports transfer via DMA, its much faster. Please note, that the newer SoC's (e.g. Armada 38x) are not supported by this driver. As they have an AHCI compatible SATA controller integrated. The original version of this driver was sent by Tor Krill to the U-Boot list a few years ago. Here the link: http://lists.denx.de/pipermail/u-boot/2010-June/073147.html Changes by Stefan: - Coding-style cleanup - Support for Armada XP added - MBUS window setup added - D-cache flush and invalidation added - works with dcache enabled on Armada XP - Removed mdelay() from ata_wait_register() and add timer based timeout detection to speed up the transfer Signed-off-by: Tor Krill Signed-off-by: Stefan Roese Cc: Luka Perkov Cc: Tom Rini --- drivers/block/Makefile | 1 + drivers/block/sata_mv.c | 1045 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 1046 insertions(+) create mode 100644 drivers/block/sata_mv.c diff --git a/drivers/block/Makefile b/drivers/block/Makefile index f161c01c67..eb8bda9ab2 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_MVSATA_IDE) += mvsata_ide.o obj-$(CONFIG_MX51_PATA) += mxc_ata.o obj-$(CONFIG_PATA_BFIN) += pata_bfin.o obj-$(CONFIG_SATA_DWC) += sata_dwc.o +obj-$(CONFIG_SATA_MV) += sata_mv.o obj-$(CONFIG_SATA_SIL3114) += sata_sil3114.o obj-$(CONFIG_SATA_SIL) += sata_sil.o obj-$(CONFIG_IDE_SIL680) += sil680.o diff --git a/drivers/block/sata_mv.c b/drivers/block/sata_mv.c new file mode 100644 index 0000000000..88249341d6 --- /dev/null +++ b/drivers/block/sata_mv.c @@ -0,0 +1,1045 @@ +/* + * Copyright (C) Excito Elektronik i Skåne AB, 2010. + * Author: Tor Krill + * + * Copyright (C) 2015 Stefan Roese + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * This driver supports the SATA controller of some Mavell SoC's. + * Here a (most likely incomplete) list of the supported SoC's: + * - Kirkwood + * - Armada 370 + * - Armada XP + * + * This driver implementation is an alternative to the already available + * driver via the "ide" commands interface (drivers/block/mvsata_ide.c). + * But this driver only supports PIO mode and as this new driver also + * supports transfer via DMA, its much faster. + * + * Please note, that the newer SoC's (e.g. Armada 38x) are not supported + * by this driver. As they have an AHCI compatible SATA controller + * integrated. + */ + +/* + * TODO: + * Better error recovery + * No support for using PRDs (Thus max 64KB transfers) + * No NCQ support + * No port multiplier support + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_KIRKWOOD) +#include +#define SATAHC_BASE KW_SATA_BASE +#else +#include +#define SATAHC_BASE MVEBU_AXP_SATA_BASE +#endif + +#define SATA0_BASE (SATAHC_BASE + 0x2000) +#define SATA1_BASE (SATAHC_BASE + 0x4000) + +/* EDMA registers */ +#define EDMA_CFG 0x000 +#define EDMA_CFG_NCQ (1 << 5) +#define EDMA_CFG_EQUE (1 << 9) +#define EDMA_TIMER 0x004 +#define EDMA_IECR 0x008 +#define EDMA_IEMR 0x00c +#define EDMA_RQBA_HI 0x010 +#define EDMA_RQIPR 0x014 +#define EDMA_RQIPR_IPMASK (0x1f << 5) +#define EDMA_RQIPR_IPSHIFT 5 +#define EDMA_RQOPR 0x018 +#define EDMA_RQOPR_OPMASK (0x1f << 5) +#define EDMA_RQOPR_OPSHIFT 5 +#define EDMA_RSBA_HI 0x01c +#define EDMA_RSIPR 0x020 +#define EDMA_RSIPR_IPMASK (0x1f << 3) +#define EDMA_RSIPR_IPSHIFT 3 +#define EDMA_RSOPR 0x024 +#define EDMA_RSOPR_OPMASK (0x1f << 3) +#define EDMA_RSOPR_OPSHIFT 3 +#define EDMA_CMD 0x028 +#define EDMA_CMD_ENEDMA (0x01 << 0) +#define EDMA_CMD_DISEDMA (0x01 << 1) +#define EDMA_CMD_ATARST (0x01 << 2) +#define EDMA_CMD_FREEZE (0x01 << 4) +#define EDMA_TEST_CTL 0x02c +#define EDMA_STATUS 0x030 +#define EDMA_IORTO 0x034 +#define EDMA_CDTR 0x040 +#define EDMA_HLTCND 0x060 +#define EDMA_NTSR 0x094 + +/* Basic DMA registers */ +#define BDMA_CMD 0x224 +#define BDMA_STATUS 0x228 +#define BDMA_DTLB 0x22c +#define BDMA_DTHB 0x230 +#define BDMA_DRL 0x234 +#define BDMA_DRH 0x238 + +/* SATA Interface registers */ +#define SIR_ICFG 0x050 +#define SIR_CFG_GEN2EN (0x1 << 7) +#define SIR_PLL_CFG 0x054 +#define SIR_SSTATUS 0x300 +#define SSTATUS_DET_MASK (0x0f << 0) +#define SIR_SERROR 0x304 +#define SIR_SCONTROL 0x308 +#define SIR_SCONTROL_DETEN (0x01 << 0) +#define SIR_LTMODE 0x30c +#define SIR_LTMODE_NELBE (0x01 << 7) +#define SIR_PHYMODE3 0x310 +#define SIR_PHYMODE4 0x314 +#define SIR_PHYMODE1 0x32c +#define SIR_PHYMODE2 0x330 +#define SIR_BIST_CTRL 0x334 +#define SIR_BIST_DW1 0x338 +#define SIR_BIST_DW2 0x33c +#define SIR_SERR_IRQ_MASK 0x340 +#define SIR_SATA_IFCTRL 0x344 +#define SIR_SATA_TESTCTRL 0x348 +#define SIR_SATA_IFSTATUS 0x34c +#define SIR_VEND_UNIQ 0x35c +#define SIR_FIS_CFG 0x360 +#define SIR_FIS_IRQ_CAUSE 0x364 +#define SIR_FIS_IRQ_MASK 0x368 +#define SIR_FIS_DWORD0 0x370 +#define SIR_FIS_DWORD1 0x374 +#define SIR_FIS_DWORD2 0x378 +#define SIR_FIS_DWORD3 0x37c +#define SIR_FIS_DWORD4 0x380 +#define SIR_FIS_DWORD5 0x384 +#define SIR_FIS_DWORD6 0x388 +#define SIR_PHYM9_GEN2 0x398 +#define SIR_PHYM9_GEN1 0x39c +#define SIR_PHY_CFG 0x3a0 +#define SIR_PHYCTL 0x3a4 +#define SIR_PHYM10 0x3a8 +#define SIR_PHYM12 0x3b0 + +/* Shadow registers */ +#define PIO_DATA 0x100 +#define PIO_ERR_FEATURES 0x104 +#define PIO_SECTOR_COUNT 0x108 +#define PIO_LBA_LOW 0x10c +#define PIO_LBA_MID 0x110 +#define PIO_LBA_HI 0x114 +#define PIO_DEVICE 0x118 +#define PIO_CMD_STATUS 0x11c +#define PIO_STATUS_ERR (0x01 << 0) +#define PIO_STATUS_DRQ (0x01 << 3) +#define PIO_STATUS_DF (0x01 << 5) +#define PIO_STATUS_DRDY (0x01 << 6) +#define PIO_STATUS_BSY (0x01 << 7) +#define PIO_CTRL_ALTSTAT 0x120 + +/* SATAHC arbiter registers */ +#define SATAHC_CFG 0x000 +#define SATAHC_RQOP 0x004 +#define SATAHC_RQIP 0x008 +#define SATAHC_ICT 0x00c +#define SATAHC_ITT 0x010 +#define SATAHC_ICR 0x014 +#define SATAHC_ICR_PORT0 (0x01 << 0) +#define SATAHC_ICR_PORT1 (0x01 << 1) +#define SATAHC_MIC 0x020 +#define SATAHC_MIM 0x024 +#define SATAHC_LED_CFG 0x02c + +#define REQUEST_QUEUE_SIZE 32 +#define RESPONSE_QUEUE_SIZE REQUEST_QUEUE_SIZE + +struct crqb { + u32 dtb_low; /* DW0 */ + u32 dtb_high; /* DW1 */ + u32 control_flags; /* DW2 */ + u32 drb_count; /* DW3 */ + u32 ata_cmd_feat; /* DW4 */ + u32 ata_addr; /* DW5 */ + u32 ata_addr_exp; /* DW6 */ + u32 ata_sect_count; /* DW7 */ +}; + +#define CRQB_ALIGN 0x400 + +#define CRQB_CNTRLFLAGS_DIR (0x01 << 0) +#define CRQB_CNTRLFLAGS_DQTAGMASK (0x1f << 1) +#define CRQB_CNTRLFLAGS_DQTAGSHIFT 1 +#define CRQB_CNTRLFLAGS_PMPORTMASK (0x0f << 12) +#define CRQB_CNTRLFLAGS_PMPORTSHIFT 12 +#define CRQB_CNTRLFLAGS_PRDMODE (0x01 << 16) +#define CRQB_CNTRLFLAGS_HQTAGMASK (0x1f << 17) +#define CRQB_CNTRLFLAGS_HQTAGSHIFT 17 + +#define CRQB_CMDFEAT_CMDMASK (0xff << 16) +#define CRQB_CMDFEAT_CMDSHIFT 16 +#define CRQB_CMDFEAT_FEATMASK (0xff << 16) +#define CRQB_CMDFEAT_FEATSHIFT 24 + +#define CRQB_ADDR_LBA_LOWMASK (0xff << 0) +#define CRQB_ADDR_LBA_LOWSHIFT 0 +#define CRQB_ADDR_LBA_MIDMASK (0xff << 8) +#define CRQB_ADDR_LBA_MIDSHIFT 8 +#define CRQB_ADDR_LBA_HIGHMASK (0xff << 16) +#define CRQB_ADDR_LBA_HIGHSHIFT 16 +#define CRQB_ADDR_DEVICE_MASK (0xff << 24) +#define CRQB_ADDR_DEVICE_SHIFT 24 + +#define CRQB_ADDR_LBA_LOW_EXP_MASK (0xff << 0) +#define CRQB_ADDR_LBA_LOW_EXP_SHIFT 0 +#define CRQB_ADDR_LBA_MID_EXP_MASK (0xff << 8) +#define CRQB_ADDR_LBA_MID_EXP_SHIFT 8 +#define CRQB_ADDR_LBA_HIGH_EXP_MASK (0xff << 16) +#define CRQB_ADDR_LBA_HIGH_EXP_SHIFT 16 +#define CRQB_ADDR_FEATURE_EXP_MASK (0xff << 24) +#define CRQB_ADDR_FEATURE_EXP_SHIFT 24 + +#define CRQB_SECTCOUNT_COUNT_MASK (0xff << 0) +#define CRQB_SECTCOUNT_COUNT_SHIFT 0 +#define CRQB_SECTCOUNT_COUNT_EXP_MASK (0xff << 8) +#define CRQB_SECTCOUNT_COUNT_EXP_SHIFT 8 + +#define MVSATA_WIN_CONTROL(w) (MVEBU_AXP_SATA_BASE + 0x30 + ((w) << 4)) +#define MVSATA_WIN_BASE(w) (MVEBU_AXP_SATA_BASE + 0x34 + ((w) << 4)) + +struct eprd { + u32 phyaddr_low; + u32 bytecount_eot; + u32 phyaddr_hi; + u32 reserved; +}; + +#define EPRD_PHYADDR_MASK 0xfffffffe +#define EPRD_BYTECOUNT_MASK 0x0000ffff +#define EPRD_EOT (0x01 << 31) + +struct crpb { + u32 id; + u32 flags; + u32 timestamp; +}; + +#define CRPB_ALIGN 0x100 + +#define READ_CMD 0 +#define WRITE_CMD 1 + +/* + * Since we don't use PRDs yet max transfer size + * is 64KB + */ +#define MV_ATA_MAX_SECTORS (65535 / ATA_SECT_SIZE) + +/* Keep track if hw is initialized or not */ +static u32 hw_init; + +struct mv_priv { + char name[12]; + u32 link; + u32 regbase; + u32 queue_depth; + u16 pio; + u16 mwdma; + u16 udma; + + void *crqb_alloc; + struct crqb *request; + + void *crpb_alloc; + struct crpb *response; +}; + +static int ata_wait_register(u32 *addr, u32 mask, u32 val, u32 timeout_msec) +{ + ulong start; + + start = get_timer(0); + do { + if ((in_le32(addr) & mask) == val) + return 0; + } while (get_timer(start) < timeout_msec); + + return -ETIMEDOUT; +} + +/* Cut from sata_mv in linux kernel */ +static int mv_stop_edma_engine(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + int i; + + /* Disable eDMA. The disable bit auto clears. */ + out_le32(priv->regbase + EDMA_CMD, EDMA_CMD_DISEDMA); + + /* Wait for the chip to confirm eDMA is off. */ + for (i = 10000; i > 0; i--) { + u32 reg = in_le32(priv->regbase + EDMA_CMD); + if (!(reg & EDMA_CMD_ENEDMA)) { + debug("EDMA stop on port %d succesful\n", port); + return 0; + } + udelay(10); + } + debug("EDMA stop on port %d failed\n", port); + return -1; +} + +static int mv_start_edma_engine(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + u32 tmp; + + /* Check preconditions */ + tmp = in_le32(priv->regbase + SIR_SSTATUS); + if ((tmp & SSTATUS_DET_MASK) != 0x03) { + printf("Device error on port: %d\n", port); + return -1; + } + + tmp = in_le32(priv->regbase + PIO_CMD_STATUS); + if (tmp & (ATA_BUSY | ATA_DRQ)) { + printf("Device not ready on port: %d\n", port); + return -1; + } + + /* Clear interrupt cause */ + out_le32(priv->regbase + EDMA_IECR, 0x0); + + tmp = in_le32(SATAHC_BASE + SATAHC_ICR); + tmp &= ~(port == 0 ? SATAHC_ICR_PORT0 : SATAHC_ICR_PORT1); + out_le32(SATAHC_BASE + SATAHC_ICR, tmp); + + /* Configure edma operation */ + tmp = in_le32(priv->regbase + EDMA_CFG); + tmp &= ~EDMA_CFG_NCQ; /* No NCQ */ + tmp &= ~EDMA_CFG_EQUE; /* Dont queue operations */ + out_le32(priv->regbase + EDMA_CFG, tmp); + + out_le32(priv->regbase + SIR_FIS_IRQ_CAUSE, 0x0); + + /* Configure fis, set all to no-wait for now */ + out_le32(priv->regbase + SIR_FIS_CFG, 0x0); + + /* Setup request queue */ + out_le32(priv->regbase + EDMA_RQBA_HI, 0x0); + out_le32(priv->regbase + EDMA_RQIPR, priv->request); + out_le32(priv->regbase + EDMA_RQOPR, 0x0); + + /* Setup response queue */ + out_le32(priv->regbase + EDMA_RSBA_HI, 0x0); + out_le32(priv->regbase + EDMA_RSOPR, priv->response); + out_le32(priv->regbase + EDMA_RSIPR, 0x0); + + /* Start edma */ + out_le32(priv->regbase + EDMA_CMD, EDMA_CMD_ENEDMA); + + return 0; +} + +static int mv_reset_channel(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + + /* Make sure edma is stopped */ + mv_stop_edma_engine(port); + + out_le32(priv->regbase + EDMA_CMD, EDMA_CMD_ATARST); + udelay(25); /* allow reset propagation */ + out_le32(priv->regbase + EDMA_CMD, 0); + mdelay(10); + + return 0; +} + +static void mv_reset_port(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + + mv_reset_channel(port); + + out_le32(priv->regbase + EDMA_CMD, 0x0); + out_le32(priv->regbase + EDMA_CFG, 0x101f); + out_le32(priv->regbase + EDMA_IECR, 0x0); + out_le32(priv->regbase + EDMA_IEMR, 0x0); + out_le32(priv->regbase + EDMA_RQBA_HI, 0x0); + out_le32(priv->regbase + EDMA_RQIPR, 0x0); + out_le32(priv->regbase + EDMA_RQOPR, 0x0); + out_le32(priv->regbase + EDMA_RSBA_HI, 0x0); + out_le32(priv->regbase + EDMA_RSIPR, 0x0); + out_le32(priv->regbase + EDMA_RSOPR, 0x0); + out_le32(priv->regbase + EDMA_IORTO, 0xfa); +} + +static void mv_reset_one_hc(void) +{ + out_le32(SATAHC_BASE + SATAHC_ICT, 0x00); + out_le32(SATAHC_BASE + SATAHC_ITT, 0x00); + out_le32(SATAHC_BASE + SATAHC_ICR, 0x00); +} + +static int probe_port(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + int tries, tries2, set15 = 0; + u32 tmp; + + debug("Probe port: %d\n", port); + + for (tries = 0; tries < 2; tries++) { + /* Clear SError */ + out_le32(priv->regbase + SIR_SERROR, 0x0); + + /* trigger com-init */ + tmp = in_le32(priv->regbase + SIR_SCONTROL); + tmp = (tmp & 0x0f0) | 0x300 | SIR_SCONTROL_DETEN; + out_le32(priv->regbase + SIR_SCONTROL, tmp); + + mdelay(1); + + tmp = in_le32(priv->regbase + SIR_SCONTROL); + tries2 = 5; + do { + tmp = (tmp & 0x0f0) | 0x300; + out_le32(priv->regbase + SIR_SCONTROL, tmp); + mdelay(10); + tmp = in_le32(priv->regbase + SIR_SCONTROL); + } while ((tmp & 0xf0f) != 0x300 && tries2--); + + mdelay(10); + + for (tries2 = 0; tries2 < 200; tries2++) { + tmp = in_le32(priv->regbase + SIR_SSTATUS); + if ((tmp & SSTATUS_DET_MASK) == 0x03) { + debug("Found device on port\n"); + return 0; + } + mdelay(1); + } + + if ((tmp & SSTATUS_DET_MASK) == 0) { + debug("No device attached on port %d\n", port); + return -ENODEV; + } + + if (!set15) { + /* Try on 1.5Gb/S */ + debug("Try 1.5Gb link\n"); + set15 = 1; + out_le32(priv->regbase + SIR_SCONTROL, 0x304); + + tmp = in_le32(priv->regbase + SIR_ICFG); + tmp &= ~SIR_CFG_GEN2EN; + out_le32(priv->regbase + SIR_ICFG, tmp); + + mv_reset_channel(port); + } + } + + debug("Failed to probe port\n"); + return -1; +} + +/* Get request queue in pointer */ +static int get_reqip(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + u32 tmp; + + tmp = in_le32(priv->regbase + EDMA_RQIPR) & EDMA_RQIPR_IPMASK; + tmp = tmp >> EDMA_RQIPR_IPSHIFT; + + return tmp; +} + +static void set_reqip(int port, int reqin) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + u32 tmp; + + tmp = in_le32(priv->regbase + EDMA_RQIPR) & ~EDMA_RQIPR_IPMASK; + tmp |= ((reqin << EDMA_RQIPR_IPSHIFT) & EDMA_RQIPR_IPMASK); + out_le32(priv->regbase + EDMA_RQIPR, tmp); +} + +/* Get next available slot, ignoring possible overwrite */ +static int get_next_reqip(int port) +{ + int slot = get_reqip(port); + slot = (slot + 1) % REQUEST_QUEUE_SIZE; + return slot; +} + +/* Get response queue in pointer */ +static int get_rspip(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + u32 tmp; + + tmp = in_le32(priv->regbase + EDMA_RSIPR) & EDMA_RSIPR_IPMASK; + tmp = tmp >> EDMA_RSIPR_IPSHIFT; + + return tmp; +} + +/* Get response queue out pointer */ +static int get_rspop(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + u32 tmp; + + tmp = in_le32(priv->regbase + EDMA_RSOPR) & EDMA_RSOPR_OPMASK; + tmp = tmp >> EDMA_RSOPR_OPSHIFT; + return tmp; +} + +/* Get next response queue pointer */ +static int get_next_rspop(int port) +{ + return (get_rspop(port) + 1) % RESPONSE_QUEUE_SIZE; +} + +/* Set response queue pointer */ +static void set_rspop(int port, int reqin) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + u32 tmp; + + tmp = in_le32(priv->regbase + EDMA_RSOPR) & ~EDMA_RSOPR_OPMASK; + tmp |= ((reqin << EDMA_RSOPR_OPSHIFT) & EDMA_RSOPR_OPMASK); + + out_le32(priv->regbase + EDMA_RSOPR, tmp); +} + +static int wait_dma_completion(int port, int index, u32 timeout_msec) +{ + u32 tmp, res; + + tmp = port == 0 ? SATAHC_ICR_PORT0 : SATAHC_ICR_PORT1; + res = ata_wait_register((u32 *)(SATAHC_BASE + SATAHC_ICR), tmp, + tmp, timeout_msec); + if (res) + printf("Failed to wait for completion on port %d\n", port); + + return res; +} + +static void process_responses(int port) +{ +#ifdef DEBUG + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; +#endif + u32 tmp; + u32 outind = get_rspop(port); + + /* Ack interrupts */ + tmp = in_le32(SATAHC_BASE + SATAHC_ICR); + if (port == 0) + tmp &= ~(BIT(0) | BIT(8)); + else + tmp &= ~(BIT(1) | BIT(9)); + tmp &= ~(BIT(4)); + out_le32(SATAHC_BASE + SATAHC_ICR, tmp); + + while (get_rspip(port) != outind) { +#ifdef DEBUG + debug("Response index %d flags %08x on port %d\n", outind, + priv->response[outind].flags, port); +#endif + outind = get_next_rspop(port); + set_rspop(port, outind); + } +} + +static int mv_ata_exec_ata_cmd(int port, struct sata_fis_h2d *cfis, + u8 *buffer, u32 len, u32 iswrite) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + struct crqb *req; + int slot; + + if (len >= 64 * 1024) { + printf("We only support <64K transfers for now\n"); + return -1; + } + + /* Initialize request */ + slot = get_reqip(port); + memset(&priv->request[slot], 0, sizeof(struct crqb)); + req = &priv->request[slot]; + + req->dtb_low = (u32)buffer; + + /* Dont use PRDs */ + req->control_flags = CRQB_CNTRLFLAGS_PRDMODE; + req->control_flags |= iswrite ? 0 : CRQB_CNTRLFLAGS_DIR; + req->control_flags |= + ((cfis->pm_port_c << CRQB_CNTRLFLAGS_PMPORTSHIFT) + & CRQB_CNTRLFLAGS_PMPORTMASK); + + req->drb_count = len; + + req->ata_cmd_feat = (cfis->command << CRQB_CMDFEAT_CMDSHIFT) & + CRQB_CMDFEAT_CMDMASK; + req->ata_cmd_feat |= (cfis->features << CRQB_CMDFEAT_FEATSHIFT) & + CRQB_CMDFEAT_FEATMASK; + + req->ata_addr = (cfis->lba_low << CRQB_ADDR_LBA_LOWSHIFT) & + CRQB_ADDR_LBA_LOWMASK; + req->ata_addr |= (cfis->lba_mid << CRQB_ADDR_LBA_MIDSHIFT) & + CRQB_ADDR_LBA_MIDMASK; + req->ata_addr |= (cfis->lba_high << CRQB_ADDR_LBA_HIGHSHIFT) & + CRQB_ADDR_LBA_HIGHMASK; + req->ata_addr |= (cfis->device << CRQB_ADDR_DEVICE_SHIFT) & + CRQB_ADDR_DEVICE_MASK; + + req->ata_addr_exp = (cfis->lba_low_exp << CRQB_ADDR_LBA_LOW_EXP_SHIFT) & + CRQB_ADDR_LBA_LOW_EXP_MASK; + req->ata_addr_exp |= + (cfis->lba_mid_exp << CRQB_ADDR_LBA_MID_EXP_SHIFT) & + CRQB_ADDR_LBA_MID_EXP_MASK; + req->ata_addr_exp |= + (cfis->lba_high_exp << CRQB_ADDR_LBA_HIGH_EXP_SHIFT) & + CRQB_ADDR_LBA_HIGH_EXP_MASK; + req->ata_addr_exp |= + (cfis->features_exp << CRQB_ADDR_FEATURE_EXP_SHIFT) & + CRQB_ADDR_FEATURE_EXP_MASK; + + req->ata_sect_count = + (cfis->sector_count << CRQB_SECTCOUNT_COUNT_SHIFT) & + CRQB_SECTCOUNT_COUNT_MASK; + req->ata_sect_count |= + (cfis->sector_count_exp << CRQB_SECTCOUNT_COUNT_EXP_SHIFT) & + CRQB_SECTCOUNT_COUNT_EXP_MASK; + + /* Flush data */ + flush_dcache_range((u32)req, (u32)req + sizeof(*req)); + + /* Trigger operation */ + slot = get_next_reqip(port); + set_reqip(port, slot); + + /* Wait for completion */ + if (wait_dma_completion(port, slot, 10000)) { + printf("ATA operation timed out\n"); + return -1; + } + + process_responses(port); + + /* Invalidate data on read */ + if (buffer && len) + invalidate_dcache_range((u32)buffer, (u32)buffer + len); + + return len; +} + +static u32 mv_sata_rw_cmd_ext(int port, lbaint_t start, u32 blkcnt, + u8 *buffer, int is_write) +{ + struct sata_fis_h2d cfis; + u32 res; + u64 block; + + block = (u64)start; + + memset(&cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis.command = (is_write) ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT; + + cfis.lba_high_exp = (block >> 40) & 0xff; + cfis.lba_mid_exp = (block >> 32) & 0xff; + cfis.lba_low_exp = (block >> 24) & 0xff; + cfis.lba_high = (block >> 16) & 0xff; + cfis.lba_mid = (block >> 8) & 0xff; + cfis.lba_low = block & 0xff; + cfis.device = ATA_LBA; + cfis.sector_count_exp = (blkcnt >> 8) & 0xff; + cfis.sector_count = blkcnt & 0xff; + + res = mv_ata_exec_ata_cmd(port, &cfis, buffer, ATA_SECT_SIZE * blkcnt, + is_write); + + return res >= 0 ? blkcnt : res; +} + +static u32 mv_sata_rw_cmd(int port, lbaint_t start, u32 blkcnt, u8 *buffer, + int is_write) +{ + struct sata_fis_h2d cfis; + lbaint_t block; + u32 res; + + block = start; + + memset(&cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis.command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ; + cfis.device = ATA_LBA; + + cfis.device |= (block >> 24) & 0xf; + cfis.lba_high = (block >> 16) & 0xff; + cfis.lba_mid = (block >> 8) & 0xff; + cfis.lba_low = block & 0xff; + cfis.sector_count = (u8)(blkcnt & 0xff); + + res = mv_ata_exec_ata_cmd(port, &cfis, buffer, ATA_SECT_SIZE * blkcnt, + is_write); + + return res >= 0 ? blkcnt : res; +} + +static u32 ata_low_level_rw(int dev, lbaint_t blknr, lbaint_t blkcnt, + void *buffer, int is_write) +{ + lbaint_t start, blks; + u8 *addr; + int max_blks; + + debug("%s: %ld %ld\n", __func__, blknr, blkcnt); + + start = blknr; + blks = blkcnt; + addr = (u8 *)buffer; + + max_blks = MV_ATA_MAX_SECTORS; + do { + if (blks > max_blks) { + if (sata_dev_desc[dev].lba48) { + mv_sata_rw_cmd_ext(dev, start, max_blks, addr, + is_write); + } else { + mv_sata_rw_cmd(dev, start, max_blks, addr, + is_write); + } + start += max_blks; + blks -= max_blks; + addr += ATA_SECT_SIZE * max_blks; + } else { + if (sata_dev_desc[dev].lba48) { + mv_sata_rw_cmd_ext(dev, start, blks, addr, + is_write); + } else { + mv_sata_rw_cmd(dev, start, blks, addr, + is_write); + } + start += blks; + blks = 0; + addr += ATA_SECT_SIZE * blks; + } + } while (blks != 0); + + return blkcnt; +} + +static int mv_ata_exec_ata_cmd_nondma(int port, + struct sata_fis_h2d *cfis, u8 *buffer, + u32 len, u32 iswrite) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + int i; + u16 *tp; + + debug("%s\n", __func__); + + out_le32(priv->regbase + PIO_SECTOR_COUNT, cfis->sector_count); + out_le32(priv->regbase + PIO_LBA_HI, cfis->lba_high); + out_le32(priv->regbase + PIO_LBA_MID, cfis->lba_mid); + out_le32(priv->regbase + PIO_LBA_LOW, cfis->lba_low); + out_le32(priv->regbase + PIO_ERR_FEATURES, cfis->features); + out_le32(priv->regbase + PIO_DEVICE, cfis->device); + out_le32(priv->regbase + PIO_CMD_STATUS, cfis->command); + + if (ata_wait_register((u32 *)(priv->regbase + PIO_CMD_STATUS), + ATA_BUSY, 0x0, 10000)) { + debug("Failed to wait for completion\n"); + return -1; + } + + if (len > 0) { + tp = (u16 *)buffer; + for (i = 0; i < len / 2; i++) { + if (iswrite) + out_le16(priv->regbase + PIO_DATA, *tp++); + else + *tp++ = in_le16(priv->regbase + PIO_DATA); + } + } + + return len; +} + +static int mv_sata_identify(int port, u16 *id) +{ + struct sata_fis_h2d h2d; + + memset(&h2d, 0, sizeof(struct sata_fis_h2d)); + + h2d.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + h2d.command = ATA_CMD_ID_ATA; + + /* Give device time to get operational */ + mdelay(10); + + return mv_ata_exec_ata_cmd_nondma(port, &h2d, (u8 *)id, + ATA_ID_WORDS * 2, READ_CMD); +} + +static void mv_sata_xfer_mode(int port, u16 *id) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + + priv->pio = id[ATA_ID_PIO_MODES]; + priv->mwdma = id[ATA_ID_MWDMA_MODES]; + priv->udma = id[ATA_ID_UDMA_MODES]; + debug("pio %04x, mwdma %04x, udma %04x\n", priv->pio, priv->mwdma, + priv->udma); +} + +static void mv_sata_set_features(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + struct sata_fis_h2d cfis; + u8 udma_cap; + + memset(&cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis.command = ATA_CMD_SET_FEATURES; + cfis.features = SETFEATURES_XFER; + + /* First check the device capablity */ + udma_cap = (u8) (priv->udma & 0xff); + + if (udma_cap == ATA_UDMA6) + cfis.sector_count = XFER_UDMA_6; + if (udma_cap == ATA_UDMA5) + cfis.sector_count = XFER_UDMA_5; + if (udma_cap == ATA_UDMA4) + cfis.sector_count = XFER_UDMA_4; + if (udma_cap == ATA_UDMA3) + cfis.sector_count = XFER_UDMA_3; + + mv_ata_exec_ata_cmd_nondma(port, &cfis, NULL, 0, READ_CMD); +} + +int mv_sata_spin_down(int dev) +{ + struct sata_fis_h2d cfis; + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[dev].priv; + + if (priv->link == 0) { + debug("No device on port: %d\n", dev); + return 1; + } + + memset(&cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis.command = ATA_CMD_STANDBY; + + return mv_ata_exec_ata_cmd_nondma(dev, &cfis, NULL, 0, READ_CMD); +} + +int mv_sata_spin_up(int dev) +{ + struct sata_fis_h2d cfis; + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[dev].priv; + + if (priv->link == 0) { + debug("No device on port: %d\n", dev); + return 1; + } + + memset(&cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis.command = ATA_CMD_IDLE; + + return mv_ata_exec_ata_cmd_nondma(dev, &cfis, NULL, 0, READ_CMD); +} + +ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer) +{ + return ata_low_level_rw(dev, blknr, blkcnt, buffer, READ_CMD); +} + +ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer) +{ + return ata_low_level_rw(dev, blknr, blkcnt, (void *)buffer, WRITE_CMD); +} + +/* + * Initialize SATA memory windows + */ +static void mvsata_ide_conf_mbus_windows(void) +{ + const struct mbus_dram_target_info *dram; + int i; + + dram = mvebu_mbus_dram_info(); + + /* Disable windows, Set Size/Base to 0 */ + for (i = 0; i < 4; i++) { + writel(0, MVSATA_WIN_CONTROL(i)); + writel(0, MVSATA_WIN_BASE(i)); + } + + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + MVSATA_WIN_CONTROL(i)); + writel(cs->base & 0xffff0000, MVSATA_WIN_BASE(i)); + } +} + +int init_sata(int dev) +{ + struct mv_priv *priv; + + debug("Initialize sata dev: %d\n", dev); + + if (dev < 0 || dev >= CONFIG_SYS_SATA_MAX_DEVICE) { + printf("Invalid sata device %d\n", dev); + return -1; + } + + priv = (struct mv_priv *)malloc(sizeof(struct mv_priv)); + if (!priv) { + printf("Failed to allocate memory for private sata data\n"); + return -ENOMEM; + } + + memset((void *)priv, 0, sizeof(struct mv_priv)); + + /* Allocate and align request buffer */ + priv->crqb_alloc = malloc(sizeof(struct crqb) * REQUEST_QUEUE_SIZE + + CRQB_ALIGN); + if (!priv->crqb_alloc) { + printf("Unable to allocate memory for request queue\n"); + return -ENOMEM; + } + memset(priv->crqb_alloc, 0, + sizeof(struct crqb) * REQUEST_QUEUE_SIZE + CRQB_ALIGN); + priv->request = (struct crqb *)(((u32) priv->crqb_alloc + CRQB_ALIGN) & + ~(CRQB_ALIGN - 1)); + + /* Allocate and align response buffer */ + priv->crpb_alloc = malloc(sizeof(struct crpb) * REQUEST_QUEUE_SIZE + + CRPB_ALIGN); + if (!priv->crpb_alloc) { + printf("Unable to allocate memory for response queue\n"); + return -ENOMEM; + } + memset(priv->crpb_alloc, 0, + sizeof(struct crpb) * REQUEST_QUEUE_SIZE + CRPB_ALIGN); + priv->response = (struct crpb *)(((u32) priv->crpb_alloc + CRPB_ALIGN) & + ~(CRPB_ALIGN - 1)); + + sata_dev_desc[dev].priv = (void *)priv; + + sprintf(priv->name, "SATA%d", dev); + + priv->regbase = dev == 0 ? SATA0_BASE : SATA1_BASE; + + if (!hw_init) { + debug("Initialize sata hw\n"); + hw_init = 1; + mv_reset_one_hc(); + mvsata_ide_conf_mbus_windows(); + } + + mv_reset_port(dev); + + if (probe_port(dev)) { + priv->link = 0; + return -ENODEV; + } + priv->link = 1; + + return 0; +} + +int reset_sata(int dev) +{ + return 0; +} + +int scan_sata(int port) +{ + unsigned char serial[ATA_ID_SERNO_LEN + 1]; + unsigned char firmware[ATA_ID_FW_REV_LEN + 1]; + unsigned char product[ATA_ID_PROD_LEN + 1]; + u64 n_sectors; + u16 *id; + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + + if (!priv->link) + return -ENODEV; + + id = (u16 *)malloc(ATA_ID_WORDS * 2); + if (!id) { + printf("Failed to malloc id data\n"); + return -ENOMEM; + } + + mv_sata_identify(port, id); + ata_swap_buf_le16(id, ATA_ID_WORDS); +#ifdef DEBUG + ata_dump_id(id); +#endif + + /* Serial number */ + ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial)); + memcpy(sata_dev_desc[port].product, serial, sizeof(serial)); + + /* Firmware version */ + ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware)); + memcpy(sata_dev_desc[port].revision, firmware, sizeof(firmware)); + + /* Product model */ + ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product)); + memcpy(sata_dev_desc[port].vendor, product, sizeof(product)); + + /* Total sectors */ + n_sectors = ata_id_n_sectors(id); + sata_dev_desc[port].lba = n_sectors; + + /* Check if support LBA48 */ + if (ata_id_has_lba48(id)) { + sata_dev_desc[port].lba48 = 1; + debug("Device support LBA48\n"); + } + + /* Get the NCQ queue depth from device */ + priv->queue_depth = ata_id_queue_depth(id); + + /* Get the xfer mode from device */ + mv_sata_xfer_mode(port, id); + + /* Set the xfer mode to highest speed */ + mv_sata_set_features(port); + + /* Start up */ + mv_start_edma_engine(port); + + return 0; +} -- 2.39.5