From 16cfc4b987c7078bb93da9b35c1956d1857207be Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 18 Jul 2015 03:10:31 +0200 Subject: [PATCH] ddr: altera: Extract Centering DQ/DQS from rw_mgr_mem_calibrate_vfifo() Just extract this piece of functionality into separate function to make the code better separated. This matches the division in Altera documentation, Altera EMI_RM 2015.05.04 , section 1, the UniPHY Calibration Stages. Signed-off-by: Marek Vasut --- drivers/ddr/altera/sequencer.c | 84 +++++++++++++++++++++++----------- 1 file changed, 57 insertions(+), 27 deletions(-) diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c index 6fa07cf7cb..9c698574c5 100644 --- a/drivers/ddr/altera/sequencer.c +++ b/drivers/ddr/altera/sequencer.c @@ -2259,6 +2259,53 @@ static int rw_mgr_mem_calibrate_dqs_enable_calibration(const u32 rw_group, return 0; } +/** + * rw_mgr_mem_calibrate_dq_dqs_centering() - Centering DQ/DQS + * @rw_group: Read/Write Group + * @test_bgn: Rank at which the test begins + * @use_read_test: Perform a read test + * @update_fom: Update FOM + * + * The centerin DQ/DQS stage attempts to align DQ and DQS signals on reads + * within a group. + */ +static int +rw_mgr_mem_calibrate_dq_dqs_centering(const u32 rw_group, const u32 test_bgn, + const int use_read_test, + const int update_fom) + +{ + int ret, grp_calibrated; + u32 rank_bgn, sr; + + /* + * Altera EMI_RM 2015.05.04 :: Figure 1-28 + * Read per-bit deskew can be done on a per shadow register basis. + */ + grp_calibrated = 1; + for (rank_bgn = 0, sr = 0; + rank_bgn < RW_MGR_MEM_NUMBER_OF_RANKS; + rank_bgn += NUM_RANKS_PER_SHADOW_REG, sr++) { + /* Check if this set of ranks should be skipped entirely. */ + if (param->skip_shadow_regs[sr]) + continue; + + ret = rw_mgr_mem_calibrate_vfifo_center(rank_bgn, rw_group, + rw_group, test_bgn, + use_read_test, + update_fom); + if (ret) + continue; + + grp_calibrated = 0; + } + + if (!grp_calibrated) + return -EIO; + + return 0; +} + /** * rw_mgr_mem_calibrate_vfifo() - Calibrate the read valid prediction FIFO * @rw_group: Read/Write Group @@ -2276,9 +2323,8 @@ static int rw_mgr_mem_calibrate_dqs_enable_calibration(const u32 rw_group, */ static int rw_mgr_mem_calibrate_vfifo(const u32 rw_group, const u32 test_bgn) { - uint32_t p, d, rank_bgn, sr; + uint32_t p, d; uint32_t dtaps_per_ptap; - uint32_t grp_calibrated; uint32_t failed_substage; int ret; @@ -2322,36 +2368,20 @@ static int rw_mgr_mem_calibrate_vfifo(const u32 rw_group, const u32 test_bgn) continue; } + /* 3) Centering DQ/DQS */ /* - * USER Read per-bit deskew can be done on a - * per shadow register basis. + * If doing read after write calibration, do not update + * FOM now. Do it then. */ - grp_calibrated = 1; - for (rank_bgn = 0, sr = 0; - rank_bgn < RW_MGR_MEM_NUMBER_OF_RANKS; - rank_bgn += NUM_RANKS_PER_SHADOW_REG, sr++) { - /* - * Determine if this set of ranks - * should be skipped entirely. - */ - if (param->skip_shadow_regs[sr]) - continue; - /* - * If doing read after write - * calibration, do not update - * FOM, now - do it then. - */ - if (rw_mgr_mem_calibrate_vfifo_center(rank_bgn, - rw_group, rw_group, - test_bgn, 1, 0)) - continue; - - grp_calibrated = 0; + ret = rw_mgr_mem_calibrate_dq_dqs_centering(rw_group, + test_bgn, 1, 0); + if (ret) { failed_substage = CAL_SUBSTAGE_VFIFO_CENTER; + continue; } - if (grp_calibrated) - goto cal_done_ok; + /* All done. */ + goto cal_done_ok; } } -- 2.39.5