From 17a8904b2791cdb495370c0e21c95f4ddd4fe877 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Tue, 4 Oct 2011 23:43:30 +0000 Subject: [PATCH] Davinci: ea20: Add NAND support Signed-off-by: Stefano Babic CC: Sandeep Paulraj CC: Scott Wood Signed-off-by: Sandeep Paulraj --- board/davinci/ea20/ea20.c | 35 ++++++++++++++++++----------------- include/configs/ea20.h | 20 +++++++++++++++++--- 2 files changed, 35 insertions(+), 20 deletions(-) diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c index 3b636fffab..f9ad121822 100644 --- a/board/davinci/ea20/ea20.c +++ b/board/davinci/ea20/ea20.c @@ -74,20 +74,21 @@ static const struct pinmux_config emac_pins[] = { #ifdef CONFIG_NAND_DAVINCI const struct pinmux_config nand_pins[] = { - { pinmux(7), 1, 1 }, - { pinmux(7), 1, 2 }, - { pinmux(7), 1, 4 }, - { pinmux(7), 1, 5 }, - { pinmux(9), 1, 0 }, - { pinmux(9), 1, 1 }, - { pinmux(9), 1, 2 }, - { pinmux(9), 1, 3 }, - { pinmux(9), 1, 4 }, - { pinmux(9), 1, 5 }, - { pinmux(9), 1, 6 }, - { pinmux(9), 1, 7 }, - { pinmux(12), 1, 5 }, - { pinmux(12), 1, 6 } + { pinmux(7), 1, 0}, /* CS2 */ + { pinmux(7), 0, 1}, /* CS3 in three state*/ + { pinmux(7), 1, 4 }, /* EMA_WE */ + { pinmux(7), 1, 5 }, /* EMA_OE */ + { pinmux(9), 1, 0 }, /* EMA_D[7] */ + { pinmux(9), 1, 1 }, /* EMA_D[6] */ + { pinmux(9), 1, 2 }, /* EMA_D[5] */ + { pinmux(9), 1, 3 }, /* EMA_D[4] */ + { pinmux(9), 1, 4 }, /* EMA_D[3] */ + { pinmux(9), 1, 5 }, /* EMA_D[2] */ + { pinmux(9), 1, 6 }, /* EMA_D[1] */ + { pinmux(9), 1, 7 }, /* EMA_D[0] */ + { pinmux(12), 1, 5 }, /* EMA_A[2] */ + { pinmux(12), 1, 6 }, /* EMA_A[1] */ + { pinmux(6), 1, 0 } /* EMA_CLK */ }; #endif @@ -143,20 +144,20 @@ int board_init(void) irq_init(); #endif -#ifdef CONFIG_NAND_DAVINCI /* * NAND CS setup - cycle counts based on da850evm NAND timings in the * Linux kernel @ 25MHz EMIFA */ +#ifdef CONFIG_NAND_DAVINCI writel((DAVINCI_ABCR_WSETUP(0) | - DAVINCI_ABCR_WSTROBE(0) | + DAVINCI_ABCR_WSTROBE(1) | DAVINCI_ABCR_WHOLD(0) | DAVINCI_ABCR_RSETUP(0) | DAVINCI_ABCR_RSTROBE(1) | DAVINCI_ABCR_RHOLD(0) | DAVINCI_ABCR_TA(0) | DAVINCI_ABCR_ASIZE_8BIT), - &davinci_emif_regs->ab2cr); /* CS3 */ + &davinci_emif_regs->ab1cr); /* CS2 */ #endif /* arch number of the board */ diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 441676b725..0dd60ada42 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -28,6 +28,7 @@ */ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_USE_SPIFLASH +#define CONFIG_SYS_USE_NAND #define CONFIG_DRIVER_TI_EMAC_USE_RMII /* @@ -99,7 +100,7 @@ #undef CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE (8 << 10) -#define CONFIG_ENV_OFFSET (256 << 10) +#define CONFIG_ENV_OFFSET 0x80000 #define CONFIG_ENV_SECT_SIZE (64 << 10) #define CONFIG_SYS_NO_FLASH #endif @@ -151,7 +152,8 @@ #undef CONFIG_CMD_PING #endif -#ifdef CONFIG_USE_NAND +/* NAND Setup */ +#ifdef CONFIG_SYS_USE_NAND #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_IMLS #define CONFIG_CMD_NAND @@ -163,8 +165,20 @@ #define CONFIG_RBTREE #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS + +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NAND_PAGE_2K +#define CONFIG_SYS_NAND_CS 2 +#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE +#undef CONFIG_SYS_NAND_HW_ECC +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif +/* SPI Flash */ #ifdef CONFIG_USE_SPIFLASH #undef CONFIG_CMD_IMLS #undef CONFIG_CMD_FLASH @@ -173,7 +187,7 @@ #define CONFIG_CMD_SAVEENV #endif -#if !defined(CONFIG_USE_NAND) && \ +#if !defined(CONFIG_SYS_USE_NAND) && \ !defined(CONFIG_USE_NOR) && \ !defined(CONFIG_USE_SPIFLASH) #define CONFIG_ENV_IS_NOWHERE -- 2.39.5