From 195dc23185400fa605d268c3d903c83286ecae37 Mon Sep 17 00:00:00 2001 From: Pau Pajuelo Date: Thu, 17 Aug 2017 03:09:14 +0200 Subject: [PATCH] igep00x0: merge igep0020 and igep0030 defconfigs to igep00x0_defconfig Update igep00x0 code with the following features: - Add board and revision detection for the boards: - IGEP0020-RF - IGEP0020-RC - IGEP0030-RG - IGEP0030-RE - Merge IGEP0020 and IGEP0030 mux tables - Add suport to use GPIO_126, GPIO_127 and GPIO_129 - board_name and board_rev environment variables display board and revision informations - Move dtb name selection from code to boot script Signed-off-by: Pau Pajuelo Signed-off-by: Ladislav Michl Tested-by: Pau Pajuelo --- board/isee/igep00x0/MAINTAINERS | 3 +- board/isee/igep00x0/common.c | 12 --- board/isee/igep00x0/igep00x0.c | 90 +++++++++++++++++-- board/isee/igep00x0/igep00x0.h | 13 ++- configs/igep0030_defconfig | 47 ---------- ...{igep0020_defconfig => igep00x0_defconfig} | 8 -- include/configs/omap3_igep00x0.h | 45 +++++++--- 7 files changed, 124 insertions(+), 94 deletions(-) delete mode 100644 configs/igep0030_defconfig rename configs/{igep0020_defconfig => igep00x0_defconfig} (80%) diff --git a/board/isee/igep00x0/MAINTAINERS b/board/isee/igep00x0/MAINTAINERS index 720ef2aa69..d75d400eed 100644 --- a/board/isee/igep00x0/MAINTAINERS +++ b/board/isee/igep00x0/MAINTAINERS @@ -3,6 +3,5 @@ M: Enric Balletbo i Serra S: Maintained F: board/isee/igep00x0/ F: include/configs/omap3_igep00x0.h -F: configs/igep0020_defconfig -F: configs/igep0030_defconfig +F: configs/igep00x0_defconfig F: configs/igep0032_defconfig diff --git a/board/isee/igep00x0/common.c b/board/isee/igep00x0/common.c index b8f1c14f6a..e59516f612 100644 --- a/board/isee/igep00x0/common.c +++ b/board/isee/igep00x0/common.c @@ -22,14 +22,6 @@ DECLARE_GLOBAL_DATA_PTR; void set_muxconf_regs(void) { MUX_DEFAULT(); - -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) - MUX_IGEP0020(); -#endif - -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) - MUX_IGEP0030(); -#endif } /* @@ -60,10 +52,6 @@ int board_init(void) /* boot param addr */ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); -#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE) - status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON); -#endif - return 0; } diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index 74f9bab093..5c7f256711 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -38,6 +37,43 @@ U_BOOT_DEVICE(igep_uart) = { &igep_serial }; +/* + * Routine: get_board_revision + * Description: GPIO_28 and GPIO_129 are used to read board and revision from + * IGEP00x0 boards. First of all, it is necessary to reset USB transceiver from + * IGEP0030 in order to read GPIO_IGEP00X0_BOARD_DETECTION correctly, because + * this functionality is shared by USB HOST. + * Once USB reset is applied, U-boot configures these pins as input pullup to + * detect board and revision: + * IGEP0020-RF = 0b00 + * IGEP0020-RC = 0b01 + * IGEP0030-RG = 0b10 + * IGEP0030-RE = 0b11 + */ +static int get_board_revision(void) +{ + int revision; + + gpio_request(IGEP0030_USB_TRANSCEIVER_RESET, + "igep0030_usb_transceiver_reset"); + gpio_direction_output(IGEP0030_USB_TRANSCEIVER_RESET, 0); + + gpio_request(GPIO_IGEP00X0_BOARD_DETECTION, "igep00x0_board_detection"); + gpio_direction_input(GPIO_IGEP00X0_BOARD_DETECTION); + revision = 2 * gpio_get_value(GPIO_IGEP00X0_BOARD_DETECTION); + gpio_free(GPIO_IGEP00X0_BOARD_DETECTION); + + gpio_request(GPIO_IGEP00X0_REVISION_DETECTION, + "igep00x0_revision_detection"); + gpio_direction_input(GPIO_IGEP00X0_REVISION_DETECTION); + revision = revision + gpio_get_value(GPIO_IGEP00X0_REVISION_DETECTION); + gpio_free(GPIO_IGEP00X0_REVISION_DETECTION); + + gpio_free(IGEP0030_USB_TRANSCEIVER_RESET); + + return revision; +} + int onenand_board_init(struct mtd_info *mtd) { if (gpmc_cs0_flash == MTD_DEV_TYPE_ONENAND) { @@ -138,31 +174,69 @@ int ft_board_setup(void *blob, bd_t *bd) } #endif -void set_fdt(void) +void set_led(void) { - switch (gd->bd->bi_arch_number) { - case MACH_TYPE_IGEP0020: - env_set("fdtfile", "omap3-igep0020.dtb"); + switch (get_board_revision()) { + case 0: + case 1: + gpio_request(IGEP0020_GPIO_LED, "igep0020_gpio_led"); + gpio_direction_output(IGEP0020_GPIO_LED, 1); break; - case MACH_TYPE_IGEP0030: - env_set("fdtfile", "omap3-igep0030.dtb"); + case 2: + case 3: + gpio_request(IGEP0030_GPIO_LED, "igep0030_gpio_led"); + gpio_direction_output(IGEP0030_GPIO_LED, 0); + break; + default: + /* Should not happen... */ break; } } +void set_boardname(void) +{ + char rev[5] = { 'F','C','G','E', }; + int i = get_board_revision(); + + rev[i+1] = 0; + env_set("board_rev", rev + i); + env_set("board_name", i < 2 ? "igep0020" : "igep0030"); +} + /* * Routine: misc_init_r * Description: Configure board specific parts */ int misc_init_r(void) { + t2_t *t2_base = (t2_t *)T2_BASE; + u32 pbias_lite; + twl4030_power_init(); + /* set VSIM to 1.8V */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED, + TWL4030_PM_RECEIVER_VSIM_VSEL_18, + TWL4030_PM_RECEIVER_VSIM_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); + + /* set up dual-voltage GPIOs to 1.8V */ + pbias_lite = readl(&t2_base->pbias_lite); + pbias_lite &= ~PBIASLITEVMODE1; + pbias_lite |= PBIASLITEPWRDNZ1; + writel(pbias_lite, &t2_base->pbias_lite); + if (get_cpu_family() == CPU_OMAP36XX) + writel(readl(OMAP34XX_CTRL_WKUP_CTRL) | + OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ, + OMAP34XX_CTRL_WKUP_CTRL); + setup_net_chip(); omap_die_id_display(); - set_fdt(); + set_led(); + + set_boardname(); return 0; } diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h index 5698efab5d..1cbe7c94d9 100644 --- a/board/isee/igep00x0/igep00x0.h +++ b/board/isee/igep00x0/igep00x0.h @@ -103,6 +103,8 @@ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /* MMC1_DAT1 */\ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /* MMC1_DAT2 */\ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /* MMC1_DAT3 */\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /* UART1_TX */\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /* UART1_RX */\ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /* UART3_TX */\ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /* UART3_RX */\ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /* I2C1_SCL */\ @@ -117,13 +119,10 @@ MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /* GPIO_6 */\ MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /* GPIO_7 */\ MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /* GPIO_8 */\ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | EN | M4)) /* GPIO_28 */\ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTD | DIS | M4)) /* GPIO_54 */\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | DIS | M4)) /* GPIO_64 */\ + MUX_VAL(CP(GPIO129), (IEN | PTU | EN | M4)) /* GPIO_129 */\ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /* SDRC_CKE0 */\ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /* SDRC_CKE1 */ #endif - -#define MUX_IGEP0020() \ - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | DIS | M4)) /* GPIO_64-ETH_NRST */\ - -#define MUX_IGEP0030() \ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /* UART1_TX */\ - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /* UART1_RX */ diff --git a/configs/igep0030_defconfig b/configs/igep0030_defconfig deleted file mode 100644 index abf83c2522..0000000000 --- a/configs/igep0030_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_TARGET_OMAP3_IGEP00X0=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030" -CONFIG_ENV_IS_NOWHERE=y -CONFIG_BOOTDELAY=3 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_SPL=y -# CONFIG_SPL_EXT_SUPPORT is not set -CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_ONENAND_SUPPORT=y -CONFIG_SPL_OS_BOOT=y -# CONFIG_CMD_IMLS is not set -CONFIG_CMD_SPL=y -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_ONENAND=y -CONFIG_CMD_SPI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_UBI=y -# CONFIG_CMD_UBIFS is not set -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_LED_STATUS=y -CONFIG_LED_STATUS_GPIO=y -CONFIG_LED_STATUS0=y -CONFIG_LED_STATUS_BIT=16 -CONFIG_LED_STATUS_STATE=2 -CONFIG_LED_STATUS_BOOT_ENABLE=y -CONFIG_LED_STATUS_BOOT=0 -CONFIG_MMC_OMAP_HS=y -CONFIG_NAND=y -CONFIG_SYS_NS16550=y -CONFIG_OMAP3_SPI=y -CONFIG_FAT_WRITE=y -CONFIG_OF_LIBFDT=y -CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/igep0020_defconfig b/configs/igep00x0_defconfig similarity index 80% rename from configs/igep0020_defconfig rename to configs/igep00x0_defconfig index 600434a4bb..1cdc73d766 100644 --- a/configs/igep0020_defconfig +++ b/configs/igep00x0_defconfig @@ -3,7 +3,6 @@ CONFIG_ARCH_OMAP2PLUS=y CONFIG_TARGET_OMAP3_IGEP00X0=y CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020" CONFIG_ENV_IS_NOWHERE=y CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -31,13 +30,6 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_UBI=y # CONFIG_CMD_UBIFS is not set CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_LED_STATUS=y -CONFIG_LED_STATUS_GPIO=y -CONFIG_LED_STATUS0=y -CONFIG_LED_STATUS_BIT=27 -CONFIG_LED_STATUS_STATE=2 -CONFIG_LED_STATUS_BOOT_ENABLE=y -CONFIG_LED_STATUS_BOOT=0 CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y CONFIG_MTD_UBI_FASTMAP=y diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index a029b54804..dc137dbd41 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -13,7 +13,6 @@ #define CONFIG_NR_DRAM_BANKS 2 #include -#include /* * We are only ever GP parts and will utilize all of the "downloaded image" @@ -26,15 +25,21 @@ #define CONFIG_REVISION_TAG 1 -/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */ -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ - (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) -#define RED_LED_GPIO 27 -#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) -#define RED_LED_GPIO 16 -#endif -#endif +/* GPIO banks */ +#define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 is in GPIO bank 2 */ +#define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO bank 4 */ + +/* TPS65950 */ +#define PBIASLITEVMODE1 (1 << 8) + +/* LED */ +#define IGEP0020_GPIO_LED 27 +#define IGEP0030_GPIO_LED 16 + +/* Board and revision detection GPIOs */ +#define IGEP0030_USB_TRANSCEIVER_RESET 54 +#define GPIO_IGEP00X0_BOARD_DETECTION 28 +#define GPIO_IGEP00X0_REVISION_DETECTION 129 /* USB */ #define CONFIG_USB_MUSB_UDC 1 @@ -67,9 +72,29 @@ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) +#define CONFIG_BOOTCOMMAND \ + "run findfdt; " \ + "run distro_bootcmd" + #include +#define ENV_FINDFDT \ + "findfdt="\ + "if test ${board_name} = igep0020; then " \ + "if test ${board_rev} = F; then " \ + "setenv fdtfile omap3-igep0020-rev-f.dtb; " \ + "else " \ + "setenv fdtfile omap3-igep0020.dtb; fi; fi; " \ + "if test ${board_name} = igep0030; then " \ + "if test ${board_rev} = G; then " \ + "setenv fdtfile omap3-igep0030-rev-g.dtb; " \ + "else " \ + "setenv fdtfile omap3-igep0030.dtb; fi; fi; " \ + "if test ${fdtfile} = ''; then " \ + "echo WARNING: Could not determine device tree to use; fi; \0" + #define CONFIG_EXTRA_ENV_SETTINGS \ + ENV_FINDFDT \ ENV_DEVICE_SETTINGS \ MEM_LAYOUT_SETTINGS \ BOOTENV -- 2.39.5