From 1bcbf48f18dcd7c986166016105d0ccba5060b27 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 11 May 2018 16:51:04 +0200 Subject: [PATCH] display5: config: Reset the board when bootm fails Since display5 is now supporting boot counting, we can just reset the board when bootm fails (i.e. it doesn't boot the fitImage kernel for any reason). Signed-off-by: Lukasz Majewski --- include/configs/display5.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/include/configs/display5.h b/include/configs/display5.h index 3cb6365367..420ced73c2 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -151,7 +151,7 @@ "sf probe;" \ "sf read ${loadaddr} swu-kernel;" \ "sf read ${loadaddr_swu_initramfs} swu-initramfs;" \ - "bootm ${loadaddr} ${loadaddr_swu_initramfs};" + "bootm ${loadaddr} ${loadaddr_swu_initramfs};reset;" #define KERNEL_RECOVERY_PROCEDURE \ "echo '#######################';" \ @@ -159,7 +159,7 @@ "echo '#######################';" \ "sf probe;" \ "sf read ${loadaddr} lin-recovery;" \ - "bootm;" + "bootm;reset;" #define SETUP_BOOTARGS \ "run set_rootfs_part;" \ @@ -309,7 +309,7 @@ "if run download_kernel; then " \ "setenv bootargs console=${console} " \ "root=/dev/mmcblk0p2 rootwait;" \ - "bootm ${loadaddr} - ${fdtaddr};" \ + "bootm ${loadaddr} - ${fdtaddr};reset;" \ "fi\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ @@ -326,7 +326,7 @@ "run addip;" \ "setenv bootargs ${bootargs} console=${console};" \ "setenv fdt_conf imx6q-${board}-${display}.dtb; " \ - "bootm ${loadaddr}#conf@${fdt_conf};" \ + "bootm ${loadaddr}#conf@${fdt_conf};reset;" \ "fi\0" \ "falcon_setup=" \ "if mmc dev ${mmcdev}; then " \ @@ -340,7 +340,7 @@ "boot_mmc=" \ "if mmc dev ${mmcdev}; then " \ SETUP_BOOTARGS \ - "bootm ${loadaddr}#conf@${fdt_conf};" \ + "bootm ${loadaddr}#conf@${fdt_conf};reset;" \ "fi\0" \ "set_kernel_part=" \ "if test ${BOOT_FROM} = ACTIVE; then " \ -- 2.39.5