From 1c8575225825b507573d0cac9c51b3611949ba01 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Fri, 26 Aug 2011 02:25:48 +0000 Subject: [PATCH] ARM: remove broken "at91rm9200dk" board Signed-off-by: Wolfgang Denk --- board/atmel/at91rm9200dk/Makefile | 56 --- board/atmel/at91rm9200dk/at91rm9200dk.c | 167 -------- board/atmel/at91rm9200dk/config.mk | 1 - board/atmel/at91rm9200dk/flash.c | 504 ------------------------ board/atmel/at91rm9200dk/led.c | 80 ---- board/atmel/at91rm9200dk/mux.c | 29 -- board/atmel/at91rm9200dk/partition.c | 40 -- boards.cfg | 1 - doc/README.scrapyard | 1 + include/configs/at91rm9200dk.h | 202 ---------- 10 files changed, 1 insertion(+), 1080 deletions(-) delete mode 100644 board/atmel/at91rm9200dk/Makefile delete mode 100644 board/atmel/at91rm9200dk/at91rm9200dk.c delete mode 100644 board/atmel/at91rm9200dk/config.mk delete mode 100644 board/atmel/at91rm9200dk/flash.c delete mode 100644 board/atmel/at91rm9200dk/led.c delete mode 100644 board/atmel/at91rm9200dk/mux.c delete mode 100644 board/atmel/at91rm9200dk/partition.c delete mode 100644 include/configs/at91rm9200dk.h diff --git a/board/atmel/at91rm9200dk/Makefile b/board/atmel/at91rm9200dk/Makefile deleted file mode 100644 index bc3dbc609d..0000000000 --- a/board/atmel/at91rm9200dk/Makefile +++ /dev/null @@ -1,56 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS-y += $(BOARD).o -COBJS-y += flash.o -COBJS-y += led.o -ifdef CONFIG_HAS_DATAFLASH -COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += mux.o -COBJS-y += partition.o -endif - -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS-y)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/atmel/at91rm9200dk/at91rm9200dk.c b/board/atmel/at91rm9200dk/at91rm9200dk.c deleted file mode 100644 index 49b5fe3203..0000000000 --- a/board/atmel/at91rm9200dk/at91rm9200dk.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include - -#if defined(CONFIG_DRIVER_ETHER) -#include -#include -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* Enable Ctrlc */ - console_init_f (); - - /* Correct IRDA resistor problem */ - /* Set PA23_TXD in Output */ - ((AT91PS_PIO) AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2; - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* arch number of AT91RM9200DK-Board */ - gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK; - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - return 0; -} - -void board_reset (void) -{ - AT91PS_PIO pio = AT91C_BASE_PIOA; - - /* Clear PA19 to trigger the hard reset */ - writel(0x00080000, pio->PIO_CODR); - writel(0x00080000, pio->PIO_OER); - writel(0x00080000, pio->PIO_PER); -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; - return 0; -} - -#ifdef CONFIG_DRIVER_ETHER -#if defined(CONFIG_CMD_NET) - -/* - * Name: - * at91rm9200_GetPhyInterface - * Description: - * Initialise the interface functions to the PHY - * Arguments: - * None - * Return value: - * None - */ -void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops) -{ - p_phyops->Init = dm9161_InitPhy; - p_phyops->IsPhyConnected = dm9161_IsPhyConnected; - p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed; - p_phyops->AutoNegotiate = dm9161_AutoNegotiate; -} - -#endif -#endif /* CONFIG_DRIVER_ETHER */ - -#ifdef CONFIG_DRIVER_AT91EMAC -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = at91emac_register(bis, 0); - return rc; -} -#endif - -/* - * Disk On Chip (NAND) Millenium initialization. - * The NAND lives in the CS2* space - */ -#if defined(CONFIG_CMD_NAND) -extern ulong nand_probe (ulong physadr); - -#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */ -void nand_init (void) -{ - /* Setup Smart Media, fitst enable the address range of CS3 */ - *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia; - /* set the bus interface characteristics based on - tDS Data Set up Time 30 - ns - tDH Data Hold Time 20 - ns - tALS ALE Set up Time 20 - ns - 16ns at 60 MHz ~= 3 */ -/*memory mapping structures */ -#define SM_ID_RWH (5 << 28) -#define SM_RWH (1 << 28) -#define SM_RWS (0 << 24) -#define SM_TDF (1 << 8) -#define SM_NWS (3) - AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS | - AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 | - SM_TDF | AT91C_SMC2_WSEN | SM_NWS); - - /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */ - *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | - AT91C_PC3_BFBAA_SMWE; - *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | - AT91C_PC3_BFBAA_SMWE; - - /* Configure PC2 as input (signal READY of the SmartMedia) */ - *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */ - *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */ - - /* Configure PB1 as input (signal Card Detect of the SmartMedia) */ - *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */ - *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */ - - /* PIOB and PIOC clock enabling */ - *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB; - *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC; - - if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1) - printf (" No SmartMedia card inserted\n"); -#ifdef DEBUG - printf (" SmartMedia card inserted\n"); - - printf ("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE); -#endif - printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20); -} -#endif diff --git a/board/atmel/at91rm9200dk/config.mk b/board/atmel/at91rm9200dk/config.mk deleted file mode 100644 index 207769233e..0000000000 --- a/board/atmel/at91rm9200dk/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x21f00000 diff --git a/board/atmel/at91rm9200dk/flash.c b/board/atmel/at91rm9200dk/flash.c deleted file mode 100644 index be2274362c..0000000000 --- a/board/atmel/at91rm9200dk/flash.c +++ /dev/null @@ -1,504 +0,0 @@ -/* - * (C) Copyright 2002 - * Lineo, Inc. - * Bernhard Kuhn - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Alex Zuepke - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -ulong myflush(void); - - -/* Flash Organization Structure */ -typedef struct OrgDef -{ - unsigned int sector_number; - unsigned int sector_size; -} OrgDef; - - -/* Flash Organizations */ -OrgDef OrgAT49BV16x4[] = -{ - { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ - { 2, 32*1024 }, /* 2 * 32 kBytes sectors */ - { 30, 64*1024 }, /* 30 * 64 kBytes sectors */ -}; - -OrgDef OrgAT49BV16x4A[] = -{ - { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ - { 31, 64*1024 }, /* 31 * 64 kBytes sectors */ -}; - -OrgDef OrgAT49BV6416[] = -{ - { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ - { 127, 64*1024 }, /* 127 * 64 kBytes sectors */ -}; - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -/* AT49BV1614A Codes */ -#define FLASH_CODE1 0xAA -#define FLASH_CODE2 0x55 -#define ID_IN_CODE 0x90 -#define ID_OUT_CODE 0xF0 - - -#define CMD_READ_ARRAY 0x00F0 -#define CMD_UNLOCK1 0x00AA -#define CMD_UNLOCK2 0x0055 -#define CMD_ERASE_SETUP 0x0080 -#define CMD_ERASE_CONFIRM 0x0030 -#define CMD_PROGRAM 0x00A0 -#define CMD_UNLOCK_BYPASS 0x0020 -#define CMD_SECTOR_UNLOCK 0x0070 - -#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00005555<<1))) -#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00002AAA<<1))) - -#define BIT_ERASE_DONE 0x0080 -#define BIT_RDY_MASK 0x0080 -#define BIT_PROGRAM_ERROR 0x0020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ - -#define READY 1 -#define ERR 2 -#define TMO 4 - -/*----------------------------------------------------------------------- - */ -void flash_identification (flash_info_t * info) -{ - volatile u16 manuf_code, device_code, add_device_code; - - MEM_FLASH_ADDR1 = FLASH_CODE1; - MEM_FLASH_ADDR2 = FLASH_CODE2; - MEM_FLASH_ADDR1 = ID_IN_CODE; - - manuf_code = *(volatile u16 *) CONFIG_SYS_FLASH_BASE; - device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + 2); - add_device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + (3 << 1)); - - MEM_FLASH_ADDR1 = FLASH_CODE1; - MEM_FLASH_ADDR2 = FLASH_CODE2; - MEM_FLASH_ADDR1 = ID_OUT_CODE; - - /* Vendor type */ - info->flash_id = ATM_MANUFACT & FLASH_VENDMASK; - printf ("Atmel: "); - - if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) { - - if ((add_device_code & FLASH_TYPEMASK) == - (ATM_ID_BV1614A & FLASH_TYPEMASK)) { - info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK; - printf ("AT49BV1614A (16Mbit)\n"); - } else { /* AT49BV1614 Flash */ - info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK; - printf ("AT49BV1614 (16Mbit)\n"); - } - - } else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) { - info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK; - printf ("AT49BV6416 (64Mbit)\n"); - } -} - -ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks) -{ - int i, nb_sectors = 0; - - for (i=0; istart[sector]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - *addr = CMD_SECTOR_UNLOCK; -} - - -ulong flash_init (void) -{ - int i, j, k; - unsigned int flash_nb_blocks, sector; - unsigned int start_address; - OrgDef *pOrgDef; - - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_identification (&flash_info[i]); - - if ((flash_info[i].flash_id & FLASH_TYPEMASK) == - (ATM_ID_BV1614 & FLASH_TYPEMASK)) { - - pOrgDef = OrgAT49BV16x4; - flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef); - } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == - (ATM_ID_BV1614A & FLASH_TYPEMASK)){ /* AT49BV1614A Flash */ - - pOrgDef = OrgAT49BV16x4A; - flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef); - } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == - (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ - - pOrgDef = OrgAT49BV6416; - flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef); - } else { - flash_nb_blocks = 0; - pOrgDef = OrgAT49BV16x4; - } - - flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks); - memset (flash_info[i].protect, 0, flash_info[i].sector_count); - - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic ("configured too many flash banks!\n"); - - sector = 0; - start_address = flashbase; - flash_info[i].size = 0; - - for (j = 0; j < flash_nb_blocks; j++) { - for (k = 0; k < pOrgDef[j].sector_number; k++) { - flash_info[i].start[sector++] = start_address; - start_address += pOrgDef[j].sector_size; - flash_info[i].size += pOrgDef[j].sector_size; - } - } - - size += flash_info[i].size; - - if ((flash_info[i].flash_id & FLASH_TYPEMASK) == - (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ - - /* Unlock all sectors at reset */ - for (j=0; jflash_id & FLASH_VENDMASK) { - case (ATM_MANUFACT & FLASH_VENDMASK): - printf ("Atmel: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (ATM_ID_BV1614 & FLASH_TYPEMASK): - printf ("AT49BV1614 (16Mbit)\n"); - break; - case (ATM_ID_BV1614A & FLASH_TYPEMASK): - printf ("AT49BV1614A (16Mbit)\n"); - break; - case (ATM_ID_BV6416 & FLASH_TYPEMASK): - printf ("AT49BV6416 (64Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - return; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - ulong result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip1; - ulong start; - - /* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (ATM_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - volatile u16 *addr = (volatile u16 *) (info->start[sect]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - chip1 = 0; - - do { - result = *addr; - - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip1 = TMO; - break; - } - - if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE) - chip1 = READY; - - } while (!chip1); - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - if (chip1 == ERR) { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip1 == TMO) { - rc = ERR_TIMOUT; - goto outahere; - } - - printf ("ok.\n"); - } else { /* it was protected */ - printf ("protected!\n"); - } - } - - if (ctrlc ()) - printf ("User Interrupt!\n"); - -outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked (10000); - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash - */ - -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - volatile u16 *addr = (volatile u16 *) dest; - ulong result; - int rc = ERR_OK; - int cflag, iflag; - int chip1; - ulong start; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait until flash is ready */ - chip1 = 0; - do { - result = *addr; - - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - chip1 = ERR | TMO; - break; - } - if (!chip1 && ((result & 0x80) == (data & 0x80))) - chip1 = READY; - - } while (!chip1); - - *addr = CMD_READ_ARRAY; - - if (chip1 == ERR || *addr != data) - rc = ERR_PROG_ERROR; - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong wp, data; - int rc; - - if (addr & 1) { - printf ("unaligned destination not supported\n"); - return ERR_ALIGN; - }; - - if ((int) src & 1) { - printf ("unaligned source not supported\n"); - return ERR_ALIGN; - }; - - wp = addr; - - while (cnt >= 2) { - data = *((volatile u16 *) src); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 1) { - data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << - 8); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - }; - - return ERR_OK; -} diff --git a/board/atmel/at91rm9200dk/led.c b/board/atmel/at91rm9200dk/led.c deleted file mode 100644 index 47a3bfce68..0000000000 --- a/board/atmel/at91rm9200dk/led.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * (C) Copyright 2006 - * Atmel Nordic AB - * Ulf Samuelsson - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -#define GREEN_LED AT91C_PIO_PB0 -#define YELLOW_LED AT91C_PIO_PB1 -#define RED_LED AT91C_PIO_PB2 - -void green_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_CODR = GREEN_LED; -} - -void yellow_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_CODR = YELLOW_LED; -} - -void red_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_CODR = RED_LED; -} - -void green_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_SODR = GREEN_LED; -} - -void yellow_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_SODR = YELLOW_LED; -} - -void red_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_SODR = RED_LED; -} - - -void coloured_LED_init (void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - AT91PS_PMC PMC = AT91C_BASE_PMC; - PMC->PMC_PCER = (1 << AT91C_ID_PIOB); /* Enable PIOB clock */ - /* Disable peripherals on LEDs */ - PIOB->PIO_PER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; - /* Enable pins as outputs */ - PIOB->PIO_OER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; - /* Turn all LEDs OFF */ - PIOB->PIO_SODR = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; -} diff --git a/board/atmel/at91rm9200dk/mux.c b/board/atmel/at91rm9200dk/mux.c deleted file mode 100644 index a00563ede8..0000000000 --- a/board/atmel/at91rm9200dk/mux.c +++ /dev/null @@ -1,29 +0,0 @@ -#include -#include -#include -#include - -int AT91F_GetMuxStatus(void) { - AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */ - AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */ - - - if(AT91C_BASE_PIOB->PIO_ODSR & CONFIG_SYS_DATAFLASH_MMC_PIO) - return 1; - - return 0; -} - -void AT91F_SelectMMC(void) { - AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */ - AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */ - /* Set Output */ - AT91C_BASE_PIOB->PIO_SODR = CONFIG_SYS_DATAFLASH_MMC_PIO; -} - -void AT91F_SelectSPI(void) { - AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */ - AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */ - /* Clear Output */ - AT91C_BASE_PIOB->PIO_CODR = CONFIG_SYS_DATAFLASH_MMC_PIO; -} diff --git a/board/atmel/at91rm9200dk/partition.c b/board/atmel/at91rm9200dk/partition.c deleted file mode 100644 index c739b116bf..0000000000 --- a/board/atmel/at91rm9200dk/partition.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * (C) Copyright 2008 - * Ulf Samuelsson - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ -#include -#include -#include -#include - -AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; - -struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { - {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ - {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3} -}; - -/*define the area offsets*/ -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, - {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, - {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, - {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, - {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, -}; diff --git a/boards.cfg b/boards.cfg index 331267dc20..12c82df77b 100644 --- a/boards.cfg +++ b/boards.cfg @@ -57,7 +57,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel eb_cpux9k2 arm arm920t - BuS at91 cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91 cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT -at91rm9200dk arm arm920t - atmel at91rm9200 mx1ads arm arm920t - - imx scb9328 arm arm920t - - imx cm4008 arm arm920t - - ks8695 diff --git a/doc/README.scrapyard b/doc/README.scrapyard index e49d1f78ce..8da6db6a45 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for... Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +at91rm9200dk arm arm920t - 2011-07-17 m501sk arm arm920t - 2011-07-17 kb9202 arm arm920t - 2011-07-17 csb637 arm arm920t - 2011-07-17 diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h deleted file mode 100644 index 15de310304..0000000000 --- a/include/configs/at91rm9200dk.h +++ /dev/null @@ -1,202 +0,0 @@ -/* - * Rick Bronson - * - * Configuration settings for the AT91RM9200DK board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY - -/* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ -#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ -/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */ - -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define USE_920T_MMU 1 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 -/* flash */ -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_BAUDRATE 115200 - -/* - * Hardware drivers - */ - -/* define one of these to choose the DBGU, USART0 or USART1 as console */ -#define CONFIG_AT91RM9200_USART -#define CONFIG_DBGU -#undef CONFIG_USART0 -#undef CONFIG_USART1 - -#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ - -#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ - -#define CONFIG_BOOTDELAY 3 -/* #define CONFIG_ENV_OVERWRITE 1 */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII - -#include /* needed for port definitions */ - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 - -#define CONFIG_NET_MULTI 1 -#ifdef CONFIG_NET_MULTI -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#else -#define CONFIG_DRIVER_ETHER 1 -#endif - -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_AT91C_USE_RMII - -/* AC Characteristics */ -/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ -#define DATAFLASH_TCSS (0xC << 16) -#define DATAFLASH_TCHS (0x1 << 24) - -#define CONFIG_HAS_DATAFLASH 1 -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 -#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ - -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#undef CONFIG_ENV_IS_IN_DATAFLASH - -#ifdef CONFIG_ENV_IS_IN_DATAFLASH -#define CONFIG_ENV_OFFSET 0x20000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ -#else -#define CONFIG_ENV_IS_IN_FLASH 1 -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ -#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ -#else -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ -#define CONFIG_ENV_SIZE 0x10000 /* sectors are 64K here */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ -#endif /* CONFIG_ENV_IS_IN_DATAFLASH */ - - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */ -#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) -#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */ -#else -#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ -#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 -#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 } - -#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ - -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#endif -- 2.39.5