From 1ed6648be08e4da76a08a09317932c73db0745ff Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Wed, 22 Jul 2015 01:21:15 -0700 Subject: [PATCH] x86: Reserve PCIe ECAM address range in the E820 table We should mark PCIe ECAM address range in the E820 table as reserved otherwise kernel will not attempt to use ECAM. Signed-off-by: Bin Meng Acked-by: Simon Glass --- arch/x86/Kconfig | 10 ++++++++++ arch/x86/lib/fsp/fsp_dram.c | 6 ++++++ arch/x86/lib/zimage.c | 5 ++++- 3 files changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cbbaa4f2ce..e8968a7182 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -369,4 +369,14 @@ config PCIE_ECAM_BASE assigned to PCI devices - i.e. the memory and prefetch regions, as passed to pci_set_region(). +config PCIE_ECAM_SIZE + hex + default 0x10000000 + help + This is the size of memory-mapped address of PCI configuration space, + which is only available through the Enhanced Configuration Access + Mechanism (ECAM) with PCI Express. Each bus consumes 1 MiB memory, + so a default 0x10000000 size covers all of the 256 buses which is the + maximum number of PCI buses as defined by the PCI specification. + endmenu diff --git a/arch/x86/lib/fsp/fsp_dram.c b/arch/x86/lib/fsp/fsp_dram.c index 4c0a7c82ca..28552fa15a 100644 --- a/arch/x86/lib/fsp/fsp_dram.c +++ b/arch/x86/lib/fsp/fsp_dram.c @@ -77,5 +77,11 @@ unsigned install_e820_map(unsigned max_entries, struct e820entry *entries) num_entries++; } + /* Mark PCIe ECAM address range as reserved */ + entries[num_entries].addr = CONFIG_PCIE_ECAM_BASE; + entries[num_entries].size = CONFIG_PCIE_ECAM_SIZE; + entries[num_entries].type = E820_RESERVED; + num_entries++; + return num_entries; } diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c index 144471c5bb..a1ec57e8d3 100644 --- a/arch/x86/lib/zimage.c +++ b/arch/x86/lib/zimage.c @@ -61,8 +61,11 @@ __weak unsigned install_e820_map(unsigned max_entries, entries[2].addr = ISA_END_ADDRESS; entries[2].size = gd->ram_size - ISA_END_ADDRESS; entries[2].type = E820_RAM; + entries[3].addr = CONFIG_PCIE_ECAM_BASE; + entries[3].size = CONFIG_PCIE_ECAM_SIZE; + entries[3].type = E820_RESERVED; - return 3; + return 4; } static void build_command_line(char *command_line, int auto_boot) -- 2.39.5