From 1fd8ac0ee642a93a0cdf147d8e5c189166bc6bf6 Mon Sep 17 00:00:00 2001
From: Spencer Oliver <spen@spen-soft.co.uk>
Date: Thu, 28 Feb 2013 15:39:15 +0000
Subject: [PATCH] cfg: add Netgear DG834v3 configuration

Change-Id: I3f4880d8b07b9623544b94d316b37e6d0ae97020
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1189
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
---
 tcl/board/netgear-dg834v3.cfg | 14 ++++++++++++++
 tcl/target/ti-ar7.cfg         | 30 ++++++++++++++++++++++++++++++
 2 files changed, 44 insertions(+)
 create mode 100644 tcl/board/netgear-dg834v3.cfg
 create mode 100644 tcl/target/ti-ar7.cfg

diff --git a/tcl/board/netgear-dg834v3.cfg b/tcl/board/netgear-dg834v3.cfg
new file mode 100644
index 00000000..afa98233
--- /dev/null
+++ b/tcl/board/netgear-dg834v3.cfg
@@ -0,0 +1,14 @@
+#
+# Netgear DG834v3 Router
+# Internal 4Kb RAM (@0x80000000)
+# Flash is located at 0x90000000 (CS0) and RAM is located at 0x94000000 (CS1)
+#
+
+source [find target/ti-ar7.cfg]
+
+# External 16MB SDRAM - disabled as we use internal sram
+#$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 0x00001000
+
+# External 4MB NOR Flash
+set _FLASHNAME $_CHIPNAME.norflash
+flash bank $_FLASHNAME cfi 0x90000000 0x00400000 2 2 $_TARGETNAME
diff --git a/tcl/target/ti-ar7.cfg b/tcl/target/ti-ar7.cfg
new file mode 100644
index 00000000..19d8c6f3
--- /dev/null
+++ b/tcl/target/ti-ar7.cfg
@@ -0,0 +1,30 @@
+#
+# Texas Instruments AR7 SOC - used in many adsl modems.
+# http://www.linux-mips.org/wiki/AR7
+#
+
+if { [info exists CHIPNAME] } {
+    set _CHIPNAME $CHIPNAME
+} else {
+    set _CHIPNAME ti-ar7
+}
+
+if { [info exists ENDIAN] } {
+    set _ENDIAN $ENDIAN
+} else {
+    set _ENDIAN little
+}
+
+if { [info exists CPUTAPID] } {
+    set _CPUTAPID $CPUTAPID
+} else {
+    set _CPUTAPID 0x0000100f
+}
+
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id $_CPUTAPID
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME mips_m4k -endian $_ENDIAN -chain-position $_CHIPNAME.cpu
+
+# use onboard 4k sram as working area
+$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 0x00001000
-- 
2.39.5