From 20637888dfbf3680fddd471d3292a9da814df050 Mon Sep 17 00:00:00 2001 From: Stephan Linz Date: Sat, 25 Feb 2012 00:48:33 +0000 Subject: [PATCH] microblaze: Add faked LL_TEMAC driver configuration Expand the specific configuration for the microblaze-generic board in xparameters.h with a faked setup to enable the LL_TEMAC driver. Note: From now the microblaze-generic board is no longer a valid board configuration for a real piece of hardware. Rather than, we use the file config.mk and xparameters.h as a faked board configuration to force the compilation of all potential driver code for Microblaze systems. Signed-off-by: Stephan Linz --- board/xilinx/microblaze-generic/config.mk | 6 ++++-- board/xilinx/microblaze-generic/xparameters.h | 12 ++++++++++-- 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/board/xilinx/microblaze-generic/config.mk b/board/xilinx/microblaze-generic/config.mk index f8d7e2622b..9fd1015200 100644 --- a/board/xilinx/microblaze-generic/config.mk +++ b/board/xilinx/microblaze-generic/config.mk @@ -21,8 +21,10 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -# CAUTION: This file is automatically generated by libgen. -# Version: Xilinx EDK 6.3 EDK_Gmm.12.3 +# CAUTION: This file is a faked configuration !!! +# There is no real target for the microblaze-generic +# configuration. You have to replace this file with +# the generated file from your Xilinx design flow. # CONFIG_SYS_TEXT_BASE = 0x29000000 diff --git a/board/xilinx/microblaze-generic/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h index fae03bf71b..50a82d94a0 100644 --- a/board/xilinx/microblaze-generic/xparameters.h +++ b/board/xilinx/microblaze-generic/xparameters.h @@ -21,8 +21,10 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * - * CAUTION: This file is automatically generated by libgen. - * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4 + * CAUTION: This file is a faked configuration !!! + * There is no real target for the microblaze-generic + * configuration. You have to replace this file with + * the generated file from your Xilinx design flow. */ #define XILINX_BOARD_NAME microblaze-generic @@ -69,3 +71,9 @@ /* Ethernet controller is Ethernet_MAC */ #define XILINX_EMACLITE_BASEADDR 0x40C00000 + +/* LL_TEMAC Ethernet controller */ +#define XILINX_LLTEMAC_BASEADDR 0x44000000 +#define XILINX_LLTEMAC_SDMA_CTRL_BASEADDR 0x42000180 +#define XILINX_LLTEMAC_BASEADDR1 0x44200000 +#define XILINX_LLTEMAC_FIFO_BASEADDR1 0x42100000 -- 2.39.5