From 26bf6d77a6a19300d5d8126d87a40a105f8abcb1 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 4 Jun 2014 10:26:47 +0900 Subject: [PATCH] nand_spl: remove P1023RDS_NAND support Commit 3d5a335c announced that all the nand_spl boards would be removed before v2014.07 release. Signed-off-by: Masahiro Yamada --- board/freescale/p1023rds/p1023rds.c | 5 - board/freescale/p1023rds/tlb.c | 2 - boards.cfg | 1 - include/configs/P1023RDS.h | 46 +-------- nand_spl/board/freescale/p1023rds/Makefile | 87 ----------------- nand_spl/board/freescale/p1023rds/nand_boot.c | 96 ------------------- 6 files changed, 1 insertion(+), 236 deletions(-) delete mode 100644 nand_spl/board/freescale/p1023rds/Makefile delete mode 100644 nand_spl/board/freescale/p1023rds/nand_boot.c diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c index d8c87458e8..2b883c719e 100644 --- a/board/freescale/p1023rds/p1023rds.c +++ b/board/freescale/p1023rds/p1023rds.c @@ -182,11 +182,6 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); - /* By default NOR is on, and NAND is disabled */ -#ifdef CONFIG_NAND_U_BOOT - do_fixup_by_path_string(blob, "nor_flash", "status", "disabled"); - do_fixup_by_path_string(blob, "nand_flash", "status", "okay"); -#endif #ifdef CONFIG_HAS_FSL_DR_USB fdt_fixup_dr_usb(blob, bd); #endif diff --git a/board/freescale/p1023rds/tlb.c b/board/freescale/p1023rds/tlb.c index 8b2bf50799..3c92c14ae3 100644 --- a/board/freescale/p1023rds/tlb.c +++ b/board/freescale/p1023rds/tlb.c @@ -36,7 +36,6 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_4M, 1), -#ifndef CONFIG_NAND_SPL /* *W*G* - BCSR and NOR flash on local bus*/ /* This will be changed to *I*G* after relocation to RAM. */ SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE_PHYS, @@ -79,7 +78,6 @@ struct fsl_e_tlb_entry tlb_table[] = { CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 10, BOOKE_PAGESZ_1M, 1), -#endif /* *I*G - NAND */ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, diff --git a/boards.cfg b/boards.cfg index f1e9e032a2..fb0a093069 100644 --- a/boards.cfg +++ b/boards.cfg @@ -833,7 +833,6 @@ Active powerpc mpc85xx - freescale p1022ds Active powerpc mpc85xx - freescale p1022ds P1022DS_SPIFLASH P1022DS:SPIFLASH Timur Tabi Active powerpc mpc85xx - freescale p1023rdb P1023RDB - - Active powerpc mpc85xx - freescale p1023rds P1023RDS - Roy Zang -Active powerpc mpc85xx - freescale p1023rds P1023RDS_NAND P1023RDS:NAND Roy Zang Active powerpc mpc85xx - freescale p1_p2_rdb P1011RDB P1_P2_RDB:P1011RDB - Active powerpc mpc85xx - freescale p1_p2_rdb P1011RDB_36BIT P1_P2_RDB:P1011RDB,36BIT - Active powerpc mpc85xx - freescale p1_p2_rdb P1011RDB_36BIT_SDCARD P1_P2_RDB:P1011RDB,36BIT,SDCARD - diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h index 8601eec85e..ac75b9c5fb 100644 --- a/include/configs/P1023RDS.h +++ b/include/configs/P1023RDS.h @@ -14,23 +14,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#ifdef CONFIG_NAND -#define CONFIG_NAND_U_BOOT -#define CONFIG_RAMBOOT_NAND -#endif - -#ifdef CONFIG_NAND_U_BOOT -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#define CONFIG_SYS_TEXT_BASE 0x11001000 - -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#else -#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif /* CONFIG_NAND_SPL */ -#endif - #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif @@ -162,7 +145,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_BCSR_BASE 0xe0000000 /* start of on board FPGA */ #define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE -#ifndef CONFIG_NAND #define CONFIG_SYS_FLASH_BASE 0xee000000 /* start of FLASH 32M */ #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -179,11 +161,8 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#else -#define CONFIG_SYS_NO_FLASH -#endif -#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) +#if defined(CONFIG_SYS_SPL) #define CONFIG_SYS_RAMBOOT #endif @@ -239,17 +218,6 @@ extern unsigned long get_clock_freq(void); | OR_FCM_TRLX \ | OR_FCM_EHTR) -#ifdef CONFIG_RAMBOOT_NAND -/* NAND Base Address */ -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -/* chip select 1 - BCSR */ -#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_BCSR_BASE_PHYS) \ - | BR_MS_GPCM | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \ - | OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \ - | OR_GPCM_EAD) -#else #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ /* chip select 1 - BCSR */ @@ -258,7 +226,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \ | OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \ | OR_GPCM_EAD) -#endif /* Serial Port * open - index 2 @@ -381,15 +348,9 @@ extern unsigned long get_clock_freq(void); #define CONFIG_ENV_OVERWRITE #if defined(CONFIG_SYS_RAMBOOT) -#if defined(CONFIG_RAMBOOT_NAND) -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) -#else #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x4000) #define CONFIG_ENV_SIZE 0x2000 -#endif #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) @@ -496,15 +457,10 @@ extern unsigned long get_clock_freq(void); #define CONFIG_PHY_MARVELL #endif -#ifndef CONFIG_NAND /* Default address of microcode for the Linux Fman driver */ /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#else -#define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_FMAN_FW_ADDR 0x1f00000 -#endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/nand_spl/board/freescale/p1023rds/Makefile b/nand_spl/board/freescale/p1023rds/Makefile deleted file mode 100644 index fba9f9350b..0000000000 --- a/nand_spl/board/freescale/p1023rds/Makefile +++ /dev/null @@ -1,87 +0,0 @@ -# -# Copyright 2010-2011 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PAD_TO := 0xfff01000 - -nandobj := $(objtree)/nand_spl/ - -LDSCRIPT= $(srctree)/$(CPUDIR)/u-boot-nand_spl.lds -LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ - $(LDFLAGS) $(LDFLAGS_FINAL) -asflags-y += -DCONFIG_NAND_SPL -ccflags-y += -DCONFIG_NAND_SPL - -SOBJS = start.o resetvec.o -COBJS = cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \ - nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o - -OBJS := $(addprefix $(obj)/,$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -targets += $(__OBJS) - -all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map -o $@ - -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(cpp_flags) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ - -ansi -D__ASSEMBLY__ -P - <$< >$@ - -# create symbolic links for common files - -$(obj)/cache.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/lib/cache.c $@ - -$(obj)/cpu_init_early.c: - @rm -f $@ - ln -sf $(srctree)/$(CPUDIR)/cpu_init_early.c $@ - -$(obj)/spl_minimal.c: - @rm -f $@ - ln -sf $(srctree)/$(CPUDIR)/spl_minimal.c $@ - -$(obj)/fsl_law.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc8xxx/law.c $@ - -$(obj)/law.c: - @rm -f $@ - ln -sf $(srctree)/board/$(BOARDDIR)/law.c $@ - -$(obj)/nand_boot_fsl_elbc.c: - @rm -f $@ - ln -sf $(srctree)/nand_spl/nand_boot_fsl_elbc.c $@ - -$(obj)/ns16550.c: - @rm -f $@ - ln -sf $(srctree)/drivers/serial/ns16550.c $@ - -$(obj)/resetvec.S: - @rm -f $@ - ln -s $(srctree)/$(CPUDIR)/resetvec.S $@ - -$(obj)/start.S: - @rm -f $@ - ln -sf $(srctree)/$(CPUDIR)/start.S $@ - -$(obj)/tlb.c: - @rm -f $@ - ln -sf $(srctree)/$(CPUDIR)/tlb.c $@ - -$(obj)/tlb_table.c: - @rm -f $@ - ln -sf $(srctree)/board/$(BOARDDIR)/tlb.c $@ diff --git a/nand_spl/board/freescale/p1023rds/nand_boot.c b/nand_spl/board/freescale/p1023rds/nand_boot.c deleted file mode 100644 index d9afa6d024..0000000000 --- a/nand_spl/board/freescale/p1023rds/nand_boot.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright 2010-2011 Freescale Semiconductor, Inc. - * Author: Roy Zang - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* Fixed sdram init -- doesn't use serial presence detect. */ -void sdram_init(void) -{ - struct ccsr_ddr __iomem *ddr = - (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; - - set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1); - - __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds); - __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config); - __raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds); - __raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config); - __raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3); - __raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0); - __raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1); - __raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2); - __raw_writel(CONFIG_SYS_DDR_CONTROL2, &ddr->sdram_cfg_2); - __raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode); - __raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2); - __raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval); - __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init); - __raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl); - __raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4); - __raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5); - __raw_writel(CONFIG_SYS_DDR_ZQ_CNTL, &ddr->ddr_zq_cntl); - __raw_writel(CONFIG_SYS_DDR_WRLVL_CNTL, &ddr->ddr_wrlvl_cntl); - __raw_writel(CONFIG_SYS_DDR_CDR_1, &ddr->ddr_cdr1); - __raw_writel(CONFIG_SYS_DDR_CDR_2, &ddr->ddr_cdr2); - /* Set, but do not enable the memory */ - __raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg); - - asm volatile("sync;isync"); - udelay(500); - - /* Let the controller go */ - out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN); -} - -void board_init_f(ulong bootflag) -{ - u32 plat_ratio; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - - /* initialize selected port with appropriate baud rate */ - plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; - plat_ratio >>= 1; - gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - gd->bus_clk / 16 / CONFIG_BAUDRATE); - - puts("\nNAND boot... "); - /* Initialize the DDR3 */ - sdram_init(); - /* copy code to RAM and jump to it - this should not return */ - /* NOTE - code has to be copied out of NAND buffer before - * other blocks can be read. - */ - relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0, - CONFIG_SYS_NAND_U_BOOT_RELOC); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - nand_boot(); -} - -void putc(char c) -{ - if (c == '\n') - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); - - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); -} - -void puts(const char *str) -{ - while (*str) - putc(*str++); -} -- 2.39.5